createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1708698758645 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2750.00 emd 194100.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 13-06-2024 16:00:00 tenderQueryClose 11-06-2024 11:00:00 technicalBidOpen 14-06-2024 17:00:00 publishedDate 04-06-2024 17:17:05 publishedByPost RDPR_EE_DIV_HAV publishedByUser KPE10818 - S.DEVARAJU bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 07-06-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE PRE Division Haveri splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08375232454 mobileNumber 9986297457 tenderSupplierList None
tenderSchedule	createdTs 1708698758694 version 7 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT4582 title Works to provide basic facilities to Karnataka Public School At Narayanpur Village in Shiggoan Taluk of Haveri District description Works to provide basic facilities to Karnataka Public School At Narayanpur Village in Shiggoan Taluk of Haveri District category WORKS categoryText Works ecv 10963657.96 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 940 locationName RDPR Division Office Haveri provisionalAmount 12960000.0 groupOverheadTotal 0.0 fileNumber 2022-23/special/devlopment(2202-02-053-0-01-133/139)
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1708698759000 0 None None Buildings Works to provide basic facilities to Karnataka Public School, Narayanpur Village, Shigggaon Taluk, Haveri District 1999692.35 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791077 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates.Additionalities for formwork centering & scaffolding 70%(SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 11337.3 11337.3 5.2785 False None None False None False 59843.93805 0 2791078 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates.(SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 6696.3 6696.3 0.914 False None None False None False 6120.4182 0 2791079 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 2.2163 False None None False None False 23657.45109 0 2791080 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9679.8 9679.8 0.4725 False None None False None False 4573.7055 0 2791081 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 8.6147 False None None False None False 91955.89221 0 2791082 89348 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10011.3 10011.3 24.9204 False None None False None False 249485.60052 0 2791083 89348 None 2.1.1A Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 90351.57 90351.57 3.93 False None None False None False 355081.6701 0 2791084 89348 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 8048.69 8048.69 50.33 False None None False None False 405090.5677 0 2791085 89348 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.12 Page No 99 Vol II PWD SR 2023/24) Cum 125444.02 125444.02 0.18 False None None False None False 22579.9236 0 2791086 89348 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Nos 1026.16 1026.16 2.0 False None None False None False 2052.32 0 2791087 89348 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 374.71 374.71 412.6 False None None False None False 154605.346 0 2791088 89348 None 12.15 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications.( excluding cost of fixtures ) (SI. No 12.15 Page No 100 Vol II PWD SR 2023/24) Sqm 6965.97 6965.97 5.04 False None None False None False 35108.4888 0 2791089 89348 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 297.95 297.95 259.816 False None None False None False 77412.1772 0 2791090 89348 None 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.11.1 Page No 79 Vol II PWD SR 2023/24) Kg 149.48 149.48 408.24 False None None False None False 61023.7152 0 2791091 89348 None 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (SI. No 9.17.2 Page No 61 Vol II PWD SR 2023/24) Sqm 1186.75 1186.75 120.94 False None None False None False 143525.545 0 2791092 89348 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1463.49 1463.49 9.19 False None None False None False 13449.4731 0 2791093 89348 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.33.3 Page No 47 Vol II PWD SR 2023/24) Sqm 140.39 140.39 12.6 False None None False None False 1768.914 0 2791094 89348 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SI. No 8.51 Page No 50 Vol II PWD SR 2023/24) Sqm 101.0 101.0 132.72 False None None False None False 13404.72 0 2791095 89348 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 30 Page No 46 Vol II PWD SR 2023/24) Sqm 175.74 175.74 412.6 False None None False None False 72510.324 0 2791096 89348 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (SI. No 8.39 Page No 48 Vol II PWD SR 2023/24) Sqm 128.27 128.27 259.82 False None None False None False 33327.1114 0 2791097 89348 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 169.68 169.68 264.6 False None None False None False 44897.328 0 2791098 89348 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.26.1 Page No 84 Vol II PWD SR 2023/24) Kg 139.38 139.38 167.38 False None None False None False 23329.4244 0 2791099 89348 None 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.16.1 Page No 82 Vol II PWD SR 2023/24) Kg 137.36 137.36 101.15 False None None False None False 13893.964 0 2791100 89348 None 7.1.1 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² (SI. No 7.1.1 Page No 21 Vol II PWD SR 2023/24) Sqm 887.79 887.79 27.23 False None None False None False 24174.5217 0 2791101 89348 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (SI. No 13.48 Page No 125 Vol II PWD SR 2023/24) m 293.91 293.91 14.0 False None None False None False 4114.74 0 2791102 89348 None 8.84 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (SI. No 8.84 Page No 55 Vol II PWD SR 2023/24) Sqm 479.75 479.75 5.28 False None None False None False 2533.08 0 2791103 89348 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 100.0 False None None False None False 6600.0 0 2791104 89348 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 2.0 False None None False None False 638.0 0 2791105 89348 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 2.0 False None None False None False 522.0 0 2791106 89348 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 320.0 False None None False None False 8320.0 0 2791107 89348 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 280.0 False None None False None False 11760.0 0 2791108 89348 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 16.0 False None None False None False 1008.0 0 2791109 89348 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 4.0 False None None False None False 1316.0 0 2791110 89348 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791111 89348 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 20.0 False None None False None False 2040.0 0 2791112 89348 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 2.0 False None None False None False 688.0 0 2791113 89348 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 2.0 False None None False None False 568.0 0 2791114 89348 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) Each 15.0 15.0 28.0 False None None False None False 420.0 0 2791115 89348 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) Each 21.0 21.0 4.0 False None None False None False 84.0 0 2791116 89348 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) Each 269.0 269.0 4.0 False None None False None False 1076.0 0 2791117 89348 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) Each 1269.0 1269.0 8.0 False None None False None False 10152.0 0 2791118 89348 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) Each 2984.0 2984.0 4.0 False None None False None False 11936.0 0 2791119 89348 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 8.0 False None None False None False 1888.0 0 2791120 89348 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) Each 63.0 63.0 8.0 False None None False None False 504.0 0 1708698759000 0 None None Buildings B Construction of Two Primary Class Room 2354498.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791121 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 70% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 11337.3 11337.3 6.613 False None None False None False 74973.5649 0 2791122 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 6696.3 6696.3 1.038 False None None False None False 6950.7594 0 2791123 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 2.52 False None None False None False 26899.236 0 2791124 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9679.8 9679.8 0.6615 False None None False None False 6403.1877 0 2791125 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 11.1642 False None None False None False 119170.02006 0 2791126 89349 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10011.3 10011.3 33.934 False None None False None False 339723.4542 0 2791127 89349 None 2.011a Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 90351.57 90351.57 5.152 False None None False None False 465491.28864 0 2791128 89349 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 8048.69 8048.69 48.81 False None None False None False 392856.5589 0 2791129 89349 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.12 Page No 99 Vol II PWD SR 2023/24) Cum 124202.0 124202.0 0.18 False None None False None False 22356.36 0 2791130 89349 None 12.051 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Nos 1026.16 1026.16 2.0 False None None False None False 2052.32 0 2791131 89349 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 374.71 374.71 436.93 False None None False None False 163722.0403 0 2791132 89349 None 12.15 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications.( excluding cost of fixtures ) (SI. No 12.15 Page No 100 Vol II PWD SR 2023/24) Sqm 6965.97 6965.97 5.04 False None None False None False 35108.4888 0 2791133 89349 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 297.95 297.95 295.213 False None None False None False 87958.71335 0 2791134 89349 None 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.11.1 Page No 79 Vol II PWD SR 2023/24) Kg 149.48 149.48 534.6 False None None False None False 79912.008 0 2791135 89349 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 169.68 169.68 415.8 False None None False None False 70552.944 0 2791136 89349 None 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (SI. No 9.17.2 Page No 61 Vol II PWD SR 2023/24) Sqm 1186.75 1186.75 157.21 False None None False None False 186568.9675 0 2791137 89349 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1463.49 1463.49 10.6 False None None False None False 15512.994 0 2791138 89349 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.33.3 Page No 47 Vol II PWD SR 2023/24) Sqm 140.39 140.39 19.8 False None None False None False 2779.722 0 2791139 89349 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SI. No 8.51 Page No 50 Vol II PWD SR 2023/24) Sqm 101.0 101.0 163.05 False None None False None False 16468.05 0 2791140 89349 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 30 Page No 46 Vol II PWD SR 2023/24) Sqm 175.74 175.74 436.93 False None None False None False 76786.0782 0 2791141 89349 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (SI. No 8.39 Page No 48 Vol II PWD SR 2023/24) Sqm 128.27 128.27 295.21 False None None False None False 37866.5867 0 2791142 89349 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.26.1 Page No 84 Vol II PWD SR 2023/24) Kg 139.38 139.38 153.85 False None None False None False 21443.613 0 2791143 89349 None 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.16.1 Page No 82 Vol II PWD SR 2023/24) Kg 137.36 137.36 103.25 False None None False None False 14182.42 0 2791144 89349 None 7.1.1 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² (SI. No 7.1.1 Page No 21 Vol II PWD SR 2023/24) Sqm 887.79 887.79 23.57 False None None False None False 20925.2103 0 2791145 89349 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (SI. No 13.48 Page No 125 Vol II PWD SR 2023/24) Mtr 293.91 293.91 12.0 False None None False None False 3526.92 0 2791146 89349 None 8.84 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (SI. No 8.84 Page No 55 Vol II PWD SR 2023/24) Sqm 479.75 479.75 5.28 False None None False None False 2533.08 0 2791147 89349 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 120.0 False None None False None False 7920.0 0 2791148 89349 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 2.0 False None None False None False 638.0 0 2791149 89349 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 2.0 False None None False None False 522.0 0 2791150 89349 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 320.0 False None None False None False 8320.0 0 2791151 89349 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 280.0 False None None False None False 11760.0 0 2791152 89349 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 16.0 False None None False None False 1008.0 0 2791153 89349 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 4.0 False None None False None False 1316.0 0 2791154 89349 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791155 89349 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 8.0 False None None False None False 1888.0 0 2791156 89349 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 20.0 False None None False None False 2040.0 0 2791157 89349 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 2.0 False None None False None False 688.0 0 2791158 89349 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 2.0 False None None False None False 568.0 0 2791159 89349 None 3.10.2 Extra Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 30.0 False None None False None False 450.0 0 2791160 89349 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) No 21.0 21.0 4.0 False None None False None False 84.0 0 2791161 89349 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 12.0 False None None False None False 756.0 0 2791162 89349 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) Each 269.0 269.0 4.0 False None None False None False 1076.0 0 2791163 89349 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) Each 1269.0 1269.0 8.0 False None None False None False 10152.0 0 2791164 89349 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) Each 2984.0 2984.0 4.0 False None None False None False 11936.0 0 1708698759000 0 None None Buildings C Construction of library room and computer room 5722203.05 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791165 89350 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m .(SI. No 1.14.1 Page No 8 Vol I PWD SR 2023/24) Cum 102.0 102.0 127.23 False None None False None False 12977.46 0 2791166 89350 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SI. No 2.1.3 Page No 15 Vol I PWD SR 2023/24) Cum 5989.0 5989.0 28.3 False None None False None False 169488.7 0 2791167 89350 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (SI. No 5.1.1 Page No 9 Vol II PWD SR 2023/24) Cum 5611.0 5611.0 29.57 False None None False None False 165917.27 0 2791168 89350 None 2.3.1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 8% (SI. No 2.3.1 Page No 16 Vol I PWD SR 2023/24) Cum 6828.84 6828.84 30.66 False None None False None False 209372.2344 0 2791169 89350 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 70% (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 10749.1 10749.1 2.94 False None None False None False 31602.354 0 2791170 89350 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 50%(Plinth Beam Concrete) (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 9484.5 9484.5 8.87 False None None False None False 84127.515 0 2791171 89350 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Coping Concrete for random rubble stone masonry (RSM)) (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 6323.0 6323.0 3.59 False None None False None False 22699.57 0 2791172 89350 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Cill concrete wall H 0.9mtr) (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 6323.0 6323.0 1.18 False None None False None False 7461.14 0 2791173 89350 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SI. No 1.9 Page No 7 Vol I PWD SR 2023/24) Cum 266.0 266.0 63.62 False None None False None False 16922.92 0 2791174 89350 None 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (SI. No 1.11 Page No 7 Vol I PWD SR 2023/24) Cum 433.0 433.0 61.79 False None None False None False 26755.07 0 2791175 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 70% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 11271.0 11271.0 6.61 False None None False None False 74501.31 0 2791176 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10608.0 10608.0 2.36 False None None False None False 25034.88 0 2791177 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9613.5 9613.5 0.662 False None None False None False 6364.137 0 2791178 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10608.0 10608.0 10.4 False None None False None False 110323.2 0 2791179 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9945.0 9945.0 29.61 False None None False None False 294471.45 0 2791180 89350 None 2.11a Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 89457.0 89457.0 8.4 False None None False None False 751438.8 0 2791181 89350 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 7969.0 7969.0 42.02 False None None False None False 334857.38 0 2791182 89350 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.12 Page No 99 Vol II PWD SR 2023/24) Cum 124202.0 124202.0 0.18 False None None False None False 22356.36 0 2791183 89350 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Nos 1016.0 1016.0 2.0 False None None False None False 2032.0 0 2791184 89350 None 12.15 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications.( excluding cost of fixtures ) (SI. No 12.15 Page No 100 Vol II PWD SR 2023/24) Sqm 6897.0 6897.0 4.62 False None None False None False 31864.14 0 2791185 89350 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 168.0 168.0 453.6 False None None False None False 76204.8 0 2791186 89350 None 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.11.1 Page No 79 Vol II PWD SR 2023/24) Kg 148.0 148.0 583.2 False None None False None False 86313.6 0 2791187 89350 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 371.0 371.0 342.95 False None None False None False 127234.45 0 2791188 89350 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 295.0 295.0 296.355 False None None False None False 87424.725 0 2791189 89350 None 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (SI. No 9.17.2 Page No 61 Vol II PWD SR 2023/24) Sqm 1175.0 1175.0 194.46 False None None False None False 228490.5 0 2791190 89350 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1449.0 1449.0 10.2 False None None False None False 14779.8 0 2791191 89350 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SI. No 8.51 Page No 50 Vol II PWD SR 2023/24) Sqm 100.0 100.0 156.83 False None None False None False 15683.0 0 2791192 89350 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.33.3 Page No 47 Vol II PWD SR 2023/24) Sqm 139.0 139.0 21.6 False None None False None False 3002.4 0 2791193 89350 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.30 Page No 46 Vol II PWD SR 2023/24) Sqm 174.0 174.0 342.95 False None None False None False 59673.3 0 2791194 89350 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (SI. No 8.39 Page No 48 Vol II PWD SR 2023/24) Sqm 127.0 127.0 296.36 False None None False None False 37637.72 0 2791195 89350 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.26.1 Page No 84 Vol II PWD SR 2023/24) Kg 138.0 138.0 255.96 False None None False None False 35322.48 0 2791196 89350 None 8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.49 Page No 49 Vol II PWD SR 2023/24) cm 4.0 4.0 750.0 False None None False None False 3000.0 0 2791197 89350 None 8.84 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (SI. No 8.84 Page No 55 Vol II PWD SR 2023/24) Sqm 475.0 475.0 7.5 False None None False None False 3562.5 0 2791198 89350 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 80.0 False None None False None False 5280.0 0 2791199 89350 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 1.0 False None None False None False 319.0 0 2791200 89350 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 7.0 False None None False None False 1827.0 0 2791201 89350 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 260.0 False None None False None False 6760.0 0 2791202 89350 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 200.0 False None None False None False 8400.0 0 2791203 89350 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 20.0 False None None False None False 1260.0 0 2791204 89350 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 3.0 False None None False None False 987.0 0 2791205 89350 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791206 89350 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 18.0 False None None False None False 4248.0 0 2791207 89350 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 30.0 False None None False None False 3060.0 0 2791208 89350 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 1.0 False None None False None False 344.0 0 2791209 89350 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 6.0 False None None False None False 1704.0 0 2791210 89350 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 30.0 False None None False None False 450.0 0 2791211 89350 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) No 21.0 21.0 6.0 False None None False None False 126.0 0 2791212 89350 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 3.0 False None None False None False 189.0 0 2791213 89350 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) Each 269.0 269.0 6.0 False None None False None False 1614.0 0 2791214 89350 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) No 1269.0 1269.0 7.0 False None None False None False 8883.0 0 2791215 89350 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) Each 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2791216 89350 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 90.0 False None None False None False 5940.0 0 2791217 89350 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 1.0 False None None False None False 319.0 0 2791218 89350 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 7.0 False None None False None False 1827.0 0 2791219 89350 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 270.0 False None None False None False 7020.0 0 2791220 89350 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 230.0 False None None False None False 9660.0 0 2791221 89350 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 20.0 False None None False None False 1260.0 0 2791222 89350 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 2.0 False None None False None False 658.0 0 2791223 89350 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791224 89350 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 24.0 False None None False None False 5664.0 0 2791225 89350 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 34.0 False None None False None False 3468.0 0 2791226 89350 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 1.0 False None None False None False 344.0 0 2791227 89350 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 7.0 False None None False None False 1988.0 0 2791228 89350 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 30.0 False None None False None False 450.0 0 2791229 89350 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) No 21.0 21.0 4.0 False None None False None False 84.0 0 2791230 89350 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 3.0 False None None False None False 189.0 0 2791231 89350 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) No 269.0 269.0 3.0 False None None False None False 807.0 0 2791232 89350 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) No 1269.0 1269.0 4.0 False None None False None False 5076.0 0 2791233 89350 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) No 2984.0 2984.0 2.0 False None None False None False 5968.0 0 2791234 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 70% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 11337.3 11337.3 7.8 False None None False None False 88430.94 0 2791235 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 6696.3 6696.3 1.18 False None None False None False 7901.634 0 2791236 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 2.36 False None None False None False 25191.348 0 2791237 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9679.8 9679.8 0.662 False None None False None False 6408.0276 0 2791238 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10674.3 10674.3 10.4 False None None False None False 111012.72 0 2791239 89350 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10011.3 10011.3 29.17 False None None False None False 292029.621 0 2791240 89350 None 2.11A Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 90351.57 90351.57 5.2 False None None False None False 469828.164 0 2791241 89350 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 8048.69 8048.69 56.28 False None None False None False 452980.2732 0 2791242 89350 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.12 Page No 99 Vol II PWD SR 2023/24) Cum 124202.0 124202.0 0.18 False None None False None False 22356.36 0 2791243 89350 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Nos 1026.16 1026.16 2.0 False None None False None False 2052.32 0 2791244 89350 None 12.15 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications.( excluding cost of fixtures ) (SI. No 12.15 Page No 100 Vol II PWD SR 2023/24) Sqm 6965.95 6965.95 4.62 False None None False None False 32182.689 0 2791245 89350 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 169.68 169.68 453.6 False None None False None False 76966.848 0 2791246 89350 None 11.11.1 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.11.1 Page No 79 Vol II PWD SR 2023/24) Kg 149.48 149.48 651.24 False None None False None False 97347.3552 0 2791247 89350 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 374.71 374.71 416.33 False None None False None False 156003.0143 0 2791248 89350 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 297.95 297.95 328.836 False None None False None False 97976.6862 0 2791249 89350 None 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (SI. No 9.17.2 Page No 61 Vol II PWD SR 2023/24) Sqm 1186.75 1186.75 181.84 False None None False None False 215798.62 0 2791250 89350 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1463.49 1463.49 10.2 False None None False None False 14927.598 0 2791251 89350 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SI. No 8.51 Page No 50 Vol II PWD SR 2023/24) Sqm 101.0 101.0 168.98 False None None False None False 17066.98 0 2791252 89350 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.33.3 Page No 47 Vol II PWD SR 2023/24) Sqm 140.39 140.39 48.6 False None None False None False 6822.954 0 2791253 89350 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.30 Page No 46 Vol II PWD SR 2023/24) Sqm 175.74 175.74 416.33 False None None False None False 73165.8342 0 2791254 89350 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (SI. No 8.39 Page No 48 Vol II PWD SR 2023/24) Sqm 128.27 128.27 328.84 False None None False None False 42180.3068 0 2791255 89350 None 7.1.1 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² (SI. No 7.1.1 Page No 21 Vol II PWD SR 2023/24) Sqm 887.79 887.79 16.38 False None None False None False 14542.0002 0 2791256 89350 None 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (SI. No 13.48 Page No 125 Vol II PWD SR 2023/24) Mtr 293.91 293.91 20.0 False None None False None False 5878.2 0 2791257 89350 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.26.1 Page No 84 Vol II PWD SR 2023/24) Kg 139.38 139.38 133.3 False None None False None False 18579.354 0 2791258 89350 None 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SI. No 11.16.1 Page No 82 Vol II PWD SR 2023/24) Kg 137.36 137.36 69.27 False None None False None False 9514.9272 0 2791259 89350 None 8.84 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (SI. No 8.84 Page No 55 Vol II PWD SR 2023/24) Sqm 479.75 479.75 7.5 False None None False None False 3598.125 0 2791260 89350 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 60.0 False None None False None False 3960.0 0 2791261 89350 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 2.0 False None None False None False 638.0 0 2791262 89350 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 1.0 False None None False None False 261.0 0 2791263 89350 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 180.0 False None None False None False 4680.0 0 2791264 89350 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 140.0 False None None False None False 5880.0 0 2791265 89350 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 10.0 False None None False None False 630.0 0 2791266 89350 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 3.0 False None None False None False 987.0 0 2791267 89350 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791268 89350 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 10.0 False None None False None False 2360.0 0 2791269 89350 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 20.0 False None None False None False 2040.0 0 2791270 89350 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 2.0 False None None False None False 688.0 0 2791271 89350 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 1.0 False None None False None False 284.0 0 2791272 89350 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 20.0 False None None False None False 300.0 0 2791273 89350 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) No 21.0 21.0 6.0 False None None False None False 126.0 0 2791274 89350 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 5.0 False None None False None False 315.0 0 2791275 89350 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) Each 269.0 269.0 5.0 False None None False None False 1345.0 0 2791276 89350 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) Each 1269.0 1269.0 7.0 False None None False None False 8883.0 0 2791277 89350 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) Each 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2791278 89350 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 60.0 False None None False None False 3960.0 0 2791279 89350 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way (SI. No 3.4.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 319.0 319.0 1.0 False None None False None False 319.0 0 2791280 89350 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way (SI. No 3.4.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 261.0 261.0 2.0 False None None False None False 522.0 0 2791281 89350 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 160.0 False None None False None False 4160.0 0 2791282 89350 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 130.0 False None None False None False 5460.0 0 2791283 89350 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 10.0 False None None False None False 630.0 0 2791284 89350 None 3.6.6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer (SI. No 3.6.6 Page No 9 Vol II PWD Ele SR 2023/24) Each 329.0 329.0 2.0 False None None False None False 658.0 0 2791285 89350 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 2.0 False None None False None False 652.0 0 2791286 89350 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal (SI. No 3.6.10 Page No 9 Vol II PWD Ele SR 2023/24) Each 236.0 236.0 6.0 False None None False None False 1416.0 0 2791287 89350 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 20.0 False None None False None False 2040.0 0 2791288 89350 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module (SI. No 3.5.6 Page No 8 Vol II PWD Ele SR 2023/24) Each 344.0 344.0 1.0 False None None False None False 344.0 0 2791289 89350 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (SI. No 3.5.5 Page No 8 Vol II PWD Ele SR 2023/24) Each 284.0 284.0 2.0 False None None False None False 568.0 0 2791290 89350 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 20.0 False None None False None False 300.0 0 2791291 89350 None 3.10.3 Extra for Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm (SI. No 3.10.3 Page No 9 Vol II PWD Ele SR 2023/24) No 21.0 21.0 4.0 False None None False None False 84.0 0 2791292 89350 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 3.0 False None None False None False 189.0 0 2791293 89350 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) Each 269.0 269.0 3.0 False None None False None False 807.0 0 2791294 89350 None 11.3.3 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W (SI. No 11.3.3 Page No 43 Vol II PWD Ele SR 2023/24) Each 1269.0 1269.0 4.0 False None None False None False 5076.0 0 2791295 89350 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. (SI. No 6.3.1 Page No 30 Vol II PWD Ele SR 2023/24) Each 2984.0 2984.0 2.0 False None None False None False 5968.0 0 1708698759000 0 None None Buildings D Construction of gents Toilet 338914.19 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791296 89351 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m .(SI. No 1.14.1 Page No 8 Vol I PWD SR 2023/24) Cum 102.0 102.0 17.23 False None None False None False 1757.46 0 2791297 89351 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (SI. No 2.1.3 Page No 15 Vol I PWD SR 2023/24) Cum 5989.0 5989.0 2.2395 False None None False None False 13412.3655 0 2791298 89351 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (SI. No 5.1.1 Page No 9 Vol II PWD SR 2023/24) Cum 5611.0 5611.0 3.7766 False None None False None False 21190.5026 0 2791299 89351 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 50% (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 9484.5 9484.5 0.3861 False None None False None False 3661.96545 0 2791300 89351 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9613.5 9613.5 0.386 False None None False None False 3710.811 0 2791301 89351 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9945.0 9945.0 2.67 False None None False None False 26553.15 0 2791302 89351 None 2.11A Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 89457.0 89457.0 0.29 False None None False None False 25942.53 0 2791303 89351 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SI. No 1.9 Page No 7 Vol I PWD SR 2023/24) Cum 266.0 266.0 3.34 False None None False None False 888.44 0 2791304 89351 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 7969.0 7969.0 9.34 False None None False None False 74430.46 0 2791305 89351 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 6323.0 6323.0 0.95 False None None False None False 6006.85 0 2791306 89351 None 12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.13.2 Page No 100 Vol II PWD SR 2023/24) Cum 99600.0 99600.0 0.16 False None None False None False 15936.0 0 2791307 89351 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Each 1061.0 1061.0 2.0 False None None False None False 2122.0 0 2791308 89351 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 371.0 371.0 58.88 False None None False None False 21844.48 0 2791309 89351 None 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial(SI. No 12.57.5 Page No 105 Vol II PWD SR 2023/24) Sqm 3897.0 3897.0 3.36 False None None False None False 13093.92 0 2791310 89351 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 295.0 295.0 32.505 False None None False None False 9588.975 0 2791311 89351 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 168.0 168.0 15.12 False None None False None False 2540.16 0 2791312 89351 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (SI. No 9.11 Page No 60 Vol II PWD SR 2023/24) Sqm 889.0 889.0 6.43 False None None False None False 5716.27 0 2791313 89351 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1449.0 1449.0 18.3 False None None False None False 26516.7 0 2791314 89351 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.25 Page No 45 Vol II PWD SR 2023/24) Sqm 137.0 137.0 65.94 False None None False None False 9033.78 0 2791315 89351 None 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (SI. No 9.36 Page No 64 Vol II PWD SR 2023/24) Sqm 1650.0 1650.0 2.08 False None None False None False 3432.0 0 2791316 89351 None 623 Polymerized plaster reinforced with glass fibre mesh (SI. No 623 Page No A30 Vol II PWD SR 2023/24) Sqm/M 317.0 317.0 1.08 False None None False None False 342.36 0 2791317 89351 None 14.1.1 Providing Sanitary work………….Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (SI. No 14.1.1 Page No 131 Vol II PWD Ele SR 2023/24) Each 4884.0 4884.0 1.0 False None None False None False 4884.0 0 2791318 89351 None 14.5.4 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern (SI. No 14.5.4 Page No 132 Vol II PWD Ele SR 2023/24) Each 18968.0 18968.0 1.0 False None None False None False 18968.0 0 2791319 89351 None 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SI. No 14.7.1 Page No 132 Vol II PWD Ele SR 2023/24) Each 3082.0 3082.0 1.0 False None None False None False 3082.0 0 2791320 89351 None 13.22.1.1 Providing and fixing PTMT bib cock of approved quality and colour. 100 mm nominal dia (SI. No 13.22.1.1 Page No 132 Vol II PWD Ele SR 2023/24) No 41.0 41.0 2.0 False None None False None False 82.0 0 2791321 89351 None 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25mm nominal Dia pipes (SI. No 13.33.3 Page No 122 Vol II PWD Ele SR 2023/24) m 296.0 296.0 10.0 False None None False None False 2960.0 0 2791322 89351 None 10.14.18 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 110mm(weight of pipe -1.894 kg) (SI. No 10.14.18 Page No 120 Vol V PWD Ele SR 2023/24) m 444.0 444.0 10.0 False None None False None False 4440.0 0 2791323 89351 None 10.14.16 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 75mm(weight of pipe -0.917 kg) (SI. No 10.14.18 Page No 120 Vol V PWD Ele SR 2023/24) m 243.0 243.0 13.0 False None None False None False 3159.0 0 2791324 89351 None 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (SI. No 13.34 Page No 123 Vol II PWD Ele SR 2023/24) Ltr 9.0 9.0 1000.0 False None None False None False 9000.0 0 2791325 89351 None 13.17.1 Providing and fixing PTMT bib cock of approved quality and colour 1 15mm nominal bore, 86 mm long, weighing not less than 88 g (SI. No 13.18.2 Page No 120 Vol II PWD Ele SR 2023/24) No 158.0 158.0 7.0 False None None False None False 1106.0 0 2791326 89351 None 13.18.2 Providing and fixing PTMT bib cock of approved quality and colour 1 20mm nominal bore, 89 mm long, weighing not less than 88 g (SI. No 13.18.2 Page No 120 Vol II PWD Ele SR 2023/24) No 144.0 144.0 2.0 False None None False None False 288.0 0 2791327 89351 None 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal (SI. No 13.61.1.1 Page No 117 Vol II PWD SR 2023/24) No 620.0 620.0 1.0 False None None False None False 620.0 0 2791328 89351 None 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20mm nominal Dia pipes (SI. No 13.33.2 Page No 122 Vol II PWD Ele SR 2023/24) m 217.0 217.0 12.0 False None None False None False 2604.0 0 1708698759000 0 None None Buildings E Construction of Ladies Toilet 338670.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791329 89352 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m . (SI. No 1.14.1 Page No 8 Vol I PWD SR 2023/24) Cum 102.0 102.0 17.23 False None None False None False 1757.46 0 2791330 89352 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (SI. No 2.1.3 Page No 15 Vol I PWD SR 2023/24) Cum 5989.0 5989.0 2.2395 False None None False None False 13412.3655 0 2791331 89352 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (SI. No 5.1.1 Page No 9 Vol II PWD SR 2023/24) Cum 5611.0 5611.0 3.7766 False None None False None False 21190.5026 0 2791332 89352 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 50% (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 9484.5 9484.5 0.3861 False None None False None False 3661.96545 0 2791333 89352 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 60% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10608.0 10608.0 0.386 False None None False None False 4094.688 0 2791334 89352 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 50% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9945.0 9945.0 2.6742 False None None False None False 26594.919 0 2791335 89352 None 2.11a Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 89457.0 89457.0 0.29 False None None False None False 25942.53 0 2791336 89352 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SI. No 1.9 Page No 7 Vol I PWD SR 2023/24) Cum 266.0 266.0 4.4594 False None None False None False 1186.2004 0 2791337 89352 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 7969.0 7969.0 9.83 False None None False None False 78335.27 0 2791338 89352 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 6323.0 6323.0 0.9451 False None None False None False 5975.8673 0 2791339 89352 None 12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.13.2 Page No 100 Vol II PWD SR 2023/24) Cum 99600.0 99600.0 0.16 False None None False None False 15936.0 0 2791340 89352 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Each 1061.0 1061.0 2.0 False None None False None False 2122.0 0 2791341 89352 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 371.0 371.0 72.33 False None None False None False 26834.43 0 2791342 89352 None 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial(SI. No 12.57.5 Page No 105 Vol II PWD SR 2023/24) Sqm 3897.0 3897.0 3.36 False None None False None False 13093.92 0 2791343 89352 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 295.0 295.0 33.405 False None None False None False 9854.475 0 2791344 89352 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Kg 168.0 168.0 15.12 False None None False None False 2540.16 0 2791345 89352 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (SI. No 9.11 Page No 60 Vol II PWD SR 2023/24) Sqm 889.0 889.0 6.43 False None None False None False 5716.27 0 2791346 89352 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1449.0 1449.0 12.15 False None None False None False 17605.35 0 2791347 89352 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.25 Page No 45 Vol II PWD SR 2023/24) Sqm 137.0 137.0 65.94 False None None False None False 9033.78 0 2791348 89352 None 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (SI. No 9.36 Page No 64 Vol II PWD SR 2023/24) Sqm 1650.0 1650.0 1.04 False None None False None False 1716.0 0 2791349 89352 None 623 Polymerized plaster reinforced with glass fibre mesh (SI. No 623 Page No A30 Vol II PWD SR 2023/24) Sqm/M 317.0 317.0 1.35 False None None False None False 427.95 0 2791350 89352 None 14.1.1 Providing Sanitary work………….Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (SI. No 14.1.1 Page No 131 Vol II PWD Ele SR 2023/24) Each 4884.0 4884.0 1.0 False None None False None False 4884.0 0 2791351 89352 None 14.6.3 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern (SI. No 14.5.4 Page No 132 Vol II PWD Ele SR 2023/24) Each 12539.0 12539.0 1.0 False None None False None False 12539.0 0 2791352 89352 None 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SI. No 14.7.1 Page No 132 Vol II PWD Ele SR 2023/24) Each 3082.0 3082.0 1.0 False None None False None False 3082.0 0 2791353 89352 None 13.22.1.1 Providing and fixing PTMT bib cock of approved quality and colour. 100 mm nominal dia (SI. No 13.22.1.1 Page No 132 Vol II PWD Ele SR 2023/24) No 41.0 41.0 5.0 False None None False None False 205.0 0 2791354 89352 None 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20mm nominal Dia pipes (SI. No 13.33.2 Page No 122 Vol II PWD Ele SR 2023/24) m 217.0 217.0 15.0 False None None False None False 3255.0 0 2791355 89352 None 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25mm nominal Dia pipes (SI. No 13.33.3 Page No 122 Vol II PWD Ele SR 2023/24) m 296.0 296.0 22.0 False None None False None False 6512.0 0 2791356 89352 None 10.14.18 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 110mm(weight of pipe -1.894 kg) (SI. No 10.14.18 Page No 120 Vol V PWD Ele SR 2023/24) m 444.0 444.0 15.0 False None None False None False 6660.0 0 2791357 89352 None 10.14.16 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 75mm(weight of pipe -0.917 kg) (SI. No 10.14.18 Page No 120 Vol V PWD Ele SR 2023/24) m 243.0 243.0 15.0 False None None False None False 3645.0 0 2791358 89352 None 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (SI. No 13.34 Page No 123 Vol II PWD Ele SR 2023/24) Ltr 9.0 9.0 1000.0 False None None False None False 9000.0 0 2791359 89352 None 13.17.1 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 g (SI. No 13.18.1 Page No 120 Vol II PWD Ele SR 2023/24) No 158.0 158.0 6.0 False None None False None False 948.0 0 2791360 89352 None 13.18.2 Providing and fixing PTMT bib cock of approved quality and colour 1 20mm nominal bore, 89 mm long, weighing not less than 88 g (SI. No 13.18.2 Page No 120 Vol II PWD Ele SR 2023/24) No 144.0 144.0 2.0 False None None False None False 288.0 0 2791361 89352 None 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal (SI. No 13.61.1.1 Page No 117 Vol II PWD SR 2023/24) No 620.0 620.0 1.0 False None None False None False 620.0 0 1708698759000 0 None None Buildings Construction of C.W.S.N Toilet 209679.67 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2791362 89353 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m . (SI. No 1.14.1 Page No 8 Vol I PWD SR 2023/24) Cum 102.0 102.0 12.36 False None None False None False 1260.72 0 2791363 89353 None 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (SI. No 2.1.3 Page No 15 Vol I PWD SR 2023/24) Cum 5989.0 5989.0 1.2698 False None None False None False 7604.8322 0 2791364 89353 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (SI. No 5.1.1 Page No 9 Vol II PWD SR 2023/24) Cum 5611.0 5611.0 2.2106 False None None False None False 12403.6766 0 2791365 89353 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Additionalities for formwork centering & scaffolding 50% (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 9484.0 9484.0 0.218 False None None False None False 2067.512 0 2791366 89353 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. Additionalities for formwork centering & scaffolding 45% (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 10608.0 10608.0 0.218 False None None False None False 2312.544 0 2791367 89353 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates. (SI. No 2.5.1 Page No 16 Vol I PWD SR 2023/24) Cum 9945.0 9945.0 1.0818 False None None False None False 10758.501 0 2791368 89353 None 2.11A Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (SI. No 2.11 Page No 18 Vol I PWD SR 2023/24) Tonne 89457.0 89457.0 0.13 False None None False None False 11629.41 0 2791369 89353 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SI. No 1.9 Page No 7 Vol I PWD SR 2023/24) Cum 266.0 266.0 1.08 False None None False None False 287.28 0 2791370 89353 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SI. No 6.8 Page No 14 Vol II PWD SR 2023/24) Cum 7969.0 7969.0 5.97 False None None False None False 47574.93 0 2791371 89353 None 2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (SI. No 2.4.2 Page No 17 Vol I PWD SR 2023/24) Cum 6323.0 6323.0 0.5928 False None None False None False 3748.2744 0 2791372 89353 None 12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (SI. No 12.13.2 Page No 100 Vol II PWD SR 2023/24) Cum 99600.0 99600.0 0.08 False None None False None False 7968.0 0 2791373 89353 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (SI. No 12.51 Page No 104 Vol II PWD SR 2023/24) Each 1061.0 1061.0 1.0 False None None False None False 1061.0 0 2791374 89353 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.8 Page No 42 Vol II PWD SR 2023/24) Sqm 371.0 371.0 39.17 False None None False None False 14532.07 0 2791375 89353 None 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial(SI. No 12.57.5 Page No 105 Vol II PWD SR 2023/24) Sqm 3897.0 3897.0 1.68 False None None False None False 6546.96 0 2791376 89353 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.2.1 Page No 41 Vol II PWD SR 2023/24) Sqm 295.0 295.0 13.32 False None None False None False 3929.4 0 2791377 89353 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (SI. No 11.34A Page No 86 Vol II PWD SR 2023/24) Sqm 168.0 168.0 7.56 False None None False None False 1270.08 0 2791378 89353 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (SI. No 9.11 Page No 60 Vol II PWD SR 2023/24) Sqm 889.0 889.0 1.8 False None None False None False 1600.2 0 2791379 89353 None 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (SI. No 9.39 Page No 65 Vol II PWD SR 2023/24) Sqm 1449.0 1449.0 9.45 False None None False None False 13693.05 0 2791380 89353 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SI. No 8.25 Page No 45 Vol II PWD SR 2023/24) Sqm 137.0 137.0 39.38 False None None False None False 5395.06 0 2791381 89353 None 623 Polymerized plaster reinforced with glass fibre mesh (SI. No 623 Page No A30 Vol II PWD SR 2023/24) Sqm/M 317.0 317.0 0.54 False None None False None False 171.18 0 2791382 89353 None 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (SI. No 14.3.1 Page No 131 Vol II PWD SR 2023/24) Each 5997.0 5997.0 1.0 False None None False None False 5997.0 0 2791383 89353 None 14.7.7 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap (SI. No 14.7.7 Page No 133 Vol II PWD SR 2023/24) Each 2099.0 2099.0 1.0 False None None False None False 2099.0 0 2791384 89353 None 13.22.1 Providing and fixing PTMT bib cock of approved quality and colour. 100 mm nominal dia (SI. No 13.22.1.1 Page No 132 Vol II PWD Ele SR 2023/24) No 41.0 41.0 2.0 False None None False None False 82.0 0 2791385 89353 None 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20mm nominal Dia pipes (SI. No 13.33.2 Page No 122 Vol II PWD Ele SR 2023/24) m 217.0 217.0 10.0 False None None False None False 2170.0 0 2791386 89353 None 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25mm nominal Dia pipes (SI. No 13.33.3 Page No 122 Vol II PWD Ele SR 2023/24) m 296.0 296.0 25.0 False None None False None False 7400.0 0 2791387 89353 None 10.14.18 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 110mm(weight of pipe -1.894 kg) (SI. No 10.14.18 Page No 120 Vol V PWD Ele SR 2023/24) m 444.0 444.0 15.0 False None None False None False 6660.0 0 2791388 89353 None 10.14.16 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 75mm(weight of pipe -0.917 kg) (SI. No 10.14.16 Page No 120 Vol V PWD Ele SR 2023/24) m 243.0 243.0 15.0 False None None False None False 3645.0 0 2791389 89353 None 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (SI. No 13.34 Page No 123 Vol II PWD Ele SR 2023/24) Ltr 9.0 9.0 1000.0 False None None False None False 9000.0 0 2791390 89353 None 13.17.1 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g SI. No 13.17.1 Page No 120 Vol II PWD SR 2023/24) No 158.0 158.0 3.0 False None None False None False 474.0 0 2791391 89353 None 13.18.2 Providing and fixing PTMT bib cock of approved quality and colour 1 20mm nominal bore, 89 mm long, weighing not less than 88 g (SI. No 13.18.2 Page No 120 Vol II PWD Ele SR 2023/24) No 144.0 144.0 2.0 False None None False None False 288.0 0 2791392 89353 None 13.4.1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc complete 0.5HP/0.37 kw5 STG(Stage) (SI. No 13.4.1 Page No 149 Vol V PWD SR 2023/24) Each 10170.0 10170.0 1.0 False None None False None False 10170.0 0 2791393 89353 None 1.2.1 Providing Electrification…………………………. Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (SI. No 1.2.1 Page No 2 Vol II PWD Ele SR 2023/24) m 66.0 66.0 10.0 False None None False None False 660.0 0 2791394 89353 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way(SI. No 3.4.4 Page No 8 Vol II PWD Ele SR 2023/24) Each 220.0 220.0 1.0 False None None False None False 220.0 0 2791395 89353 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 (SI. No 2.3.2 Page No 5 Vol II PWD Ele SR 2023/24) m 26.0 26.0 50.0 False None None False None False 1300.0 0 2791396 89353 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 (SI. No 2.3.3 Page No 5 Vol II PWD Ele SR 2023/24) m 42.0 42.0 40.0 False None None False None False 1680.0 0 2791397 89353 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 (SI. No 2.3.4 Page No 5 Vol II PWD Ele SR 2023/24) m 63.0 63.0 10.0 False None None False None False 630.0 0 2791398 89353 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (SI. No 3.6.9 Page No 9 Vol II PWD Ele SR 2023/24) Each 326.0 326.0 1.0 False None None False None False 326.0 0 2791399 89353 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (SI. No 3.6.1 Page No 9 Vol II PWD Ele SR 2023/24) Each 102.0 102.0 4.0 False None None False None False 408.0 0 2791400 89353 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Module (SI. No 3.5.4 Page No 8 Vol II PWD Ele SR 2023/24)6 Each 234.0 234.0 1.0 False None None False None False 234.0 0 2791401 89353 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80/90 mm (SI. No 3.10.2 Page No 9 Vol II PWD Ele SR 2023/24) No 15.0 15.0 6.0 False None None False None False 90.0 0 2791402 89353 None 12.46 Supplying & Fixing /replacing of 6/16/32A electrical accessories on existing switch board Supplying & Fixing of 70-150 W lamp holder 2 Pin (SI. No 12.46 Page No 52 Vol II PWD Ele SR 2023/24) No 63.0 63.0 1.0 False None None False None False 63.0 0 2791403 89353 None 11.11.5 Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K (SI. No 11.11.5 Page No 47 Vol II PWD Ele SR 2023/24) No 269.0 269.0 1.0 False None None False None False 269.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1708698772000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1708698772000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1708698772000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709100486000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1709100495000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1709100501000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1709100615000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1709100850000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None 1709100855000 0 None None ELIGIBILITY If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Haveri. (Not in inward). None 1709100859000 0 None None ELIGIBILITY All the scanned documents pertaining to bidder to be uploaded shall be in original & same original should be produced to The Executive Engineer (at the time of technical opening) who reserves right to verify the original documents before approval. None 1709100865000 0 None None ELIGIBILITY The work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept. None 1709100870000 0 None None ELIGIBILITY Tenderer must have achieved in at least two financial years an average minimum financial Turn over (in all classes of civil construction works only) per financial year (ABSTRACT STATEMENT FROM CA OF 5 YEARS) None 1709100877000 0 None None ELIGIBILITY Contractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected. None 1709100882000 0 None None ELIGIBILITY Aspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Pproc in PRED,, may now obtain the same from the website www.epro.karnataka.gov.in through link contractors can contact Helpdesk HP-080 25201227 & 080 25501216 None 1709100887000 0 None None ELIGIBILITY Bidders/ Contractors can access tender document on the website, fill them and submit the completed tender document into electronic tender on the website itself with in the stipulated date. The blank tender document can be obtained through our website www.epro.karnataka.gov.in where electronic tender form is provided. Additional conditions and information also can be obtained through the above mentioned site. None 1709100892000 0 None None ELIGIBILITY Contractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected. None 1709100897000 0 None None ELIGIBILITY Incase of Cancellation of Tender, tender application fee will not be refunded or adjusted in any case. None 1709100901000 0 None None ELIGIBILITY Bidders/contractors should attach all the scanned copies of the certificates along with their registration copy with documents pertaining to the prequalification as mentioned above(as per condition No 3 on or before the last date and time mentioned through electronic tender in the website None 1709100906000 0 None None ELIGIBILITY Any arbitrary clause is not applicable to the above works. Conditional tenders are liable for rejection. None 1709100970000 1 None None ELIGIBILITY To qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2018-19 to 2022-23: a) achieved in at least two financial years a minimum financial turnover (Turnover certificate with Profit and loss statements and IT returns ) (in all classes of civil engineering construction works only) Rs:219.28 Lakhs.(turnover shall not be less than two times of amount put to tender) b) Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs.54.82 lakhs in any one year.( usually not less than 50% of the estimated value of contract) None 1709100979000 0 None None ELIGIBILITY Any taxes shall be paid as per the prevailing orders at that time. None 1709100983000 0 None None ELIGIBILITY Bidder must be executed 80% of quantities in any one year during last 5 years i.e. 2018-19 to 2022-23 provided in BOQ , for the items stated in bid document None 1709100987000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None 1709100992000 0 None None ELIGIBILITY Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-4. None 1709100996000 0 None None ELIGIBILITY Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor. None 1709101001000 0 None None ELIGIBILITY After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills None 1709101007000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Haveri within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. None 1709101012000 0 None None ELIGIBILITY The Eligible Contractor Should Agree the KW-4 Bid Document Conditions. None 1709101017000 0 None None ELIGIBILITY The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 1 years maintenance None 1709101022000 0 None None ELIGIBILITY The item rates are excluding GST but inclusive of all other charges. None 1709101027000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1709101032000 0 None None ELIGIBILITY Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims shoulbe considered). None 1709101049000 0 None None ELIGIBILITY The Project Completion period is 11 months and the defect liability period of the work is (1) One year after successful completion of the work. (including Monsoon). None 1709101129000 1 None None ELIGIBILITY Tenderer must have liquid assets and/or availability of credit facilities of not less than Rs.29.90 Lakhs Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC as per bid document) None 1709101137000 0 None None ELIGIBILITY Only Class-3 & above registered contractors are eligible to apply for this tender None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Contractor should upload contract registration copy enrolled in PWD-Class 3/above registration copy Past Experience None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Postal Address with contact number Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Postal Address with contact number None None None None PAN & GST Certificate Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- PAN & GST Certificate None None None None Satisfactorily completed similar nature of work at least 50 Percentage of the contract value, as prime contractor, at least one similar work such as Building work of value not less than Rs.54.82 lakhs usually not less than 50 Percentage estimated value of contract -2018-19 to 2022-23 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer must have completed physical work done as perscribed in bid document KW-3 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2018-19 to 2022-23 provided in BOQ 1.Earthwork Eaxcavation/Subgrade/Embankment Cum 115.57 2.CC Pavement/PCC/RCC Cum 233.34 3.BBM/SSM/Solid block sqm/UCR Cum 185.86 4.TMT Steel reinforcement Tonne 18.71 5.Plantings Sqm 2430.54 6.Flooring Sqm 600.19 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantities of work None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2018-19 to 2022-23 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. Rs. 219.28 Lakhs. with UDIN No. certified by Authourized charted Accountant. (turnover shall not be less than two times of amount put to tender) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.29.90 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Bid capacity Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Bid capacity
tenderCriterionDocumentList	documentName optional documentTypeText Contractor should upload contract registration copy enrolled in PWD-Class 3/above registration copy True Technical Bid PAN & GST Certificate True Technical Bid Satisfactorily completed similar nature of work at least 50 Percentage of the contract value, as prime contractor, at least one similar work such as Building work of value not less than Rs.54.82 lakhs usually not less than 50 Percentage estimated value of contract -2018-19 to 2022-23 True Technical Bid Tenderer must have completed physical work done as perscribed in bid document KW-3 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2018-19 to 2022-23 provided in BOQ 1.Earthwork Eaxcavation/Subgrade/Embankment Cum 115.57 2.CC Pavement/PCC/RCC Cum 233.34 3.BBM/SSM/Solid block sqm/UCR Cum 185.86 4.TMT Steel reinforcement Tonne 18.71 5.Plantings Sqm 2430.54 6.Flooring Sqm 600.19 True Technical Bid To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2018-19 to 2022-23 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 219.28 Lakhs. with UDIN No. certified by Authourized charted Accountant.-turnover shall not be less than two times of amount put to tender True Technical Bid Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.29.90 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL True Technical Bid Bid capacity True Technical Bid Postal Address with contact number True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1716793187000 version 0 createdDate None modifiedDate None blockNumber EE PRE Division, Old ZP Compound, Vidhya Nagar, Haveri street None city Haveri state Karnataka pin 581110
tenderRecallDTO	None