| 3232228 | 111615 | None | KUSMG01 | Earth work excavation by manual means for drainscanals waste weir draft approach channels key trench foundation of Bridges and such similar works as per drawing and technical specifications including setting out shoring strutting barricading caution lights excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage and other appurtenances required to complete the work.In ordinary or soft rock without blasting upto 1.5 m depth | Cum | 299.83 | 299.83 | 10.19 | False | None | None | False | None | False | 3055.2677 | 0 |
| 3232229 | 111615 | None | KUSMG02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications.Mix 136 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7702.86 | 7702.86 | 1.85 | False | None | None | False | None | False | 14250.291 | 0 |
| 3232230 | 111615 | None | KUSMG03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 1 cement 6 coarse sandFor Footing | Cum | 7915.97 | 7915.97 | 5.85 | False | None | None | False | None | False | 46308.4245 | 0 |
| 3232231 | 111615 | None | KUSMG04 | roviding Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 1 cement 6 coarse sandFor Plinth | Cum | 7915.97 | 7915.97 | 4.05 | False | None | None | False | None | False | 32059.6785 | 0 |
| 3232232 | 111615 | None | KUSMG05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not ceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machineries curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork shall be paid separately Mix 136 M10 Using 20 mm nominal size graded crushed coarse aggregates.For plinth concrete | Cum | 7702.86 | 7702.86 | 0.9 | False | None | None | False | None | False | 6932.574 | 0 |
| 3232233 | 111615 | None | KUSMG06 | Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For Lintel | Cum | 7702.86 | 7702.86 | 0.83 | False | None | None | False | None | False | 6393.3738 | 0 |
| 3232234 | 111615 | None | KUSMG07 | Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials achinery labour cleaning straighteningcutting bending hooking lapingwelding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification | Tonne | 105559.26 | 105559.26 | 0.083 | False | None | None | False | None | False | 8761.41858 | 0 |
| 3232235 | 111615 | None | KUSMG08 | Providing and laying autoclaved aerated cement blocks masonry with 150mm230mm300 mm thick AAC blocks as per IS 2185 Part III in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials labour scaffolding and usage charges of machinery & other incidental | Cum | 9884.74 | 9884.74 | 9.54 | False | None | None | False | None | False | 94300.4196 | 0 |
| 3232236 | 111615 | None | KUSMG09 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not xceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machineries curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork shall be paid separately Mix 124 Using 20 mm nominal size graded crushed coarse aggregates.For Flooring | Cum | 7735.07 | 7735.07 | 3.59 | False | None | None | False | None | False | 27768.9013 | 0 |
| 3232237 | 111615 | None | KUSMG10 | Providing and laying red oxide flooring 40 mm thick with an under layer of 30mm thick M15 cement concrete and top layer of 10mm thick plaster with 13 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide mix of same proportion including cost of materials labour curing complete as per specifications.For Flooring | Sqm | 973.85 | 973.85 | 24.0 | False | None | None | False | None | False | 23372.4 | 0 |
| 3232238 | 111615 | None | KUSMG11 | Providing and fixing precoated galvanised iron profile sheets size hape and pitch of corrugation as approved by Engineerincharge 0.50 mm + 0.05 % total coated thickness with zinc coating 120 grams per m2 as per IS 277 in 240 mpa steel grade 57 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerincharge. The sheet shall be fixed using self drillingself tapping screws of size 5.5x 55 mm with EPDM seal complete upto any pitch in horizontal vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required | Sqm | 703.75 | 703.75 | 52.8 | False | None | None | False | None | False | 37158.0 | 0 |
| 3232239 | 111615 | None | KUSMG12 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket perforated aluminium spacers desiccants sealant Both primary and secondary sealant etc. as per specifications drawings and direction of Engineerincharge complete including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. | Sqm | 5383.45 | 5383.45 | 4.8 | False | None | None | False | None | False | 25840.56 | 0 |
| 3232240 | 111615 | None | KUSMG13 | Fabrication supplying and erecting M.S square tubes by using quality material and durablereliable and corrosin and abrasion resistant. Welding shall confirm to latest structural welding code.quality shall be on various parameters like hapesizedesigen gauge and polish .the work includes cuttingstraighteningplacing in position of M.S pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materialslabour chargestransportation and GST complete as per the instruction of site engineer. | Kg | 169.92 | 169.92 | 603.82 | False | None | None | False | None | False | 102601.0944 | 0 |
| 3232241 | 111615 | None | KUSMG14 | Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. | Sqm | 2818.72 | 2818.72 | 3.75 | False | None | None | False | None | False | 10570.2 | 0 |
| 3232242 | 111615 | None | KUSMG15 | Providing 12 mm cement plaster with cement mortar 16 1 cement 6 fine sand including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineerincharge. | Sqm | 298.59 | 298.59 | 139.37 | False | None | None | False | None | False | 41614.4883 | 0 |
| 3232243 | 111615 | None | KUSMG16 | Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied at 1.67 ltr10 m² over and including priming coat of exterior primer applied at 2.20 kg10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineerincharge. | Sqm | 215.58 | 215.58 | 139.36 | False | None | None | False | None | False | 30043.2288 | 0 |
| 3232244 | 111615 | None | KUSMG17 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr10 m² over an under coat of primer applied at 0.80 ltr10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil grease dirt and foreign matter cost of materials labour complete as per specifications and as per directions of Engineerincharge. | Sqm | 172.22 | 172.22 | 7.5 | False | None | None | False | None | False | 1291.65 | 0 |