createdTsNone
versionNone
createdDateNone
modifiedDateNone
noticeInvitingTenderDTO
createdTs1717766122430
version4
createdDateNone
modifiedDateNone
tenderTypeRFQ
evaluationTypeTWO_COVER
evaluationTypeTextTwo Cover
invitingStrategyRESERVED
invitingStrategyTextReserved
taxTypeINCLUSIVE_TAX
tenderFee500.00
emd18900.00
bidValueTypeITEM_WISE
bidValueTypeTextItem wise
tenderReceiptClose17-06-2024 16:30:00
tenderQueryClose15-06-2024 11:00:00
technicalBidOpen19-06-2024 16:45:00
publishedDate09-06-2024 18:14:43
publishedByPostPWD_EE_DIV_BGV
publishedByUserKPE12007 - S S SOBARAD
bidValidityPeriod90
noOfCalls1
preBidMeetingDateNone
preBidMeetingYnFalse
preQualificationBidOpenNone
denominationTypeRUPEES
denominationTypeTextRupees
retenderedYnNone
percentageRateTypeTextNone
contactPersonS S SOBARAD
splitEmdRequiredYnFalse
emdBankGuaranteeNone
emdCashNone
bgValidityPeriodNone
hideWeightageNone
multipleCurrencySelectionAllowedYnFalse
isTechWeightageAllowedFalse
highestBidderSelectionFalse
isVariableEmdAllowedNone
qcbsTenderYnNone
itemwiseEmdRequiredYnNone
sampleSubmissionDateNone
officeNumber08312467103
mobileNumberNone
tenderSupplierListNone
tenderSchedule
createdTs1717766122463
version16
createdDateNone
modifiedDateNone
tenderNumberPWD/2024-25/BD/WORK_INDENT10985
titleConstruction of One Class Room to Government Kannada Higher Primary School at Hanamasagar Village in Ramdurg Tq of Belagavi District (Reserved for SC Category Only).
descriptionConstruction of One Class Room to Government Kannada Higher Primary School at Hanamasagar Village in Ramdurg Tq of Belagavi District (Reserved for SC Category Only).
categoryWORKS
categoryTextWorks
ecv1508578.87
deptNamePublic Works Department
statusPUBLISHED
statusTextPublished
remarksNone
csrValueNone
ecvtenderYnTrue
location1685
locationNamePWD Division Office Belagavi
provisionalAmount1800000.0
groupOverheadTotal0.0
fileNumberRMD/AEE/2024-25/4059/School/03
tenderSubEstimateList
createdTsversioncreatedDatemodifiedDateworkCategoryNamesubEstimateNameestimateTotalitemList
17177661220000NoneNoneBuildingsEstimate for Civil work1469009.03
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3248419112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1) Cum7823.47823.43.11FalseNoneNoneFalseNoneFalse24330.7740
3248420112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1) Formwark for Columns @ 70%Cum5476.385476.383.11FalseNoneNoneFalseNoneFalse17031.54180
3248421112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1) Cum7823.47823.44.53FalseNoneNoneFalseNoneFalse35440.0020
3248422112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1)Cum4694.044694.044.53FalseNoneNoneFalseNoneFalse21264.00120
3248423112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1)Cum7823.47823.48.6FalseNoneNoneFalseNoneFalse67281.240
3248424112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1)Cum3911.73911.78.61FalseNoneNoneFalseNoneFalse33679.7370
3248425112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1)Cum7823.47823.40.73FalseNoneNoneFalseNoneFalse5711.0820
3248426112395None2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17,I.No.2.5.1) Formwark for Chajja @ 45% Cum3520.533520.530.73FalseNoneNoneFalseNoneFalse2569.98690
3248427112395None2.4.1Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.17, I.No.2.4.1) Cum7556.727556.720.38FalseNoneNoneFalseNoneFalse2871.55360
3248428112395None11.32Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (Vol.2, P.No.84,I.No.11.32) Tonne105559.26105559.261.84FalseNoneNoneFalseNoneFalse194229.03840
3248429112395None6.8Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction ofengineer incharge of work.(Volume 2 Page No 14 Item No. 6.8)Cum9414.049414.0412.76FalseNoneNoneFalseNoneFalse120123.15040
3248430112395None12.1212.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications (Volume 2 Page No 100 Item No 12.12) Cum146558.36146558.360.1FalseNoneNoneFalseNoneFalse14655.8360
3248431112395None12.57.8Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 40 mm thick one side teak and one side commercial.(Volume 2 Page No 106 Item No 12.57.8) Sqm5074.05074.04.4FalseNoneNoneFalseNoneFalse22325.60
3248432112395None9.249.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent." Sqm3365.363365.3622.68FalseNoneNoneFalseNoneFalse76326.36480
3248433112395None12.84Providing & fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 44mm width x 40mm height with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made (Volume 2 Page No 110 Item No. 12.84) Sqm5927.145927.145.04FalseNoneNoneFalseNoneFalse29872.78560
3248434112395NoneA-19Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (Volume 2 Material component S.No.245, P.No. A-19) Sqm330.4330.48.01FalseNoneNoneFalseNoneFalse2646.5040
3248435112395None11.31Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In charge including cost of materials, labour, usage charges of machinery complete as per specifications. (Volume 2 Page No 84 Item No 11.31) Kgs135.7135.774.25FalseNoneNoneFalseNoneFalse10075.7250
3248436112395None11.30.1Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (Volume 2 Page No 84 Item No 11.30.1) Sqm1076.161076.162.97FalseNoneNoneFalseNoneFalse3196.19520
3248437112395None11.34BProviding and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Vol.2, P.No.85, I.No.11.34B) Kgs215.94215.9490.72FalseNoneNoneFalseNoneFalse19590.07680
3248438112395None9.17Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 m (Vol.2, P.No.61, I.No.9.17.2) Sqm1386.51386.539.14FalseNoneNoneFalseNoneFalse54267.610
3248439112395None8.1.1Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.41, I.No.8.1.1)Sqm300.9300.980.6FalseNoneNoneFalseNoneFalse24252.540
3248440112395None8.51Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Vol.2, P.No.50, I.No.8.51) Sqm118.0118.0126.46FalseNoneNoneFalseNoneFalse14922.280
3248441112395None8.8Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Vol.2, P.No.42, I.No.8.8 ) Sqm437.78437.78122.29FalseNoneNoneFalseNoneFalse53536.11620
3248442112395None9.36Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (Vol.2, P.No.65, I.No.9.36) Sqm1947.01947.02.84FalseNoneNoneFalseNoneFalse5529.480
3248443112395None8.33.3Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.47, I.No.8.33.3) Sqm164.02164.028.01FalseNoneNoneFalseNoneFalse1313.80020
3248444112395None8.32Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.32) Sqm184.08184.08146.87FalseNoneNoneFalseNoneFalse27035.82960
3248445112395None8.33.1Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.33.1) Sqm186.44186.44126.46FalseNoneNoneFalseNoneFalse23577.20240
3248446112395None12.51Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(Volume 2 Page No 105 Item No 12.51) No1198.881198.882.0FalseNoneNoneFalseNoneFalse2397.760
3248447112395None13.48Providing and fixing on the wall face unplastisized rigid PVC rain water pipes confirmimg to IS:13592 Type A including jointing with seal ring confirmimg to IS:5382, leaving 10mm gap for thermal expansion, single socketed pipes 100mm diameter. ( Vol.2, 1st corrigendum I.No.13.48) m232.46232.461.5FalseNoneNoneFalseNoneFalse348.690
3248448112395None11.26.1Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. (Vol.2, P.No.82, I.No.11.26.1) Kgs162.84162.8423.69FalseNoneNoneFalseNoneFalse3857.67960
3248449112395None15.1Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Vol.2, P.No.133, I.No.15.1) Sqm964.06964.0659.5FalseNoneNoneFalseNoneFalse57361.570
3248450112395NoneSEBC Approved Rate Letter No. 02352 Dated: 11-08-2Providing and fixing Green board for class room (Quotation rate) Each9600.489600.482.0FalseNoneNoneFalseNoneFalse19200.960
3248451112395None20.34.1Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) (Vol.2, P.No.176, I.No.20.34.1) No200.6200.68.0FalseNoneNoneFalseNoneFalse1604.80
3248452112395None285Hold fasts (Vol.2, P.No.A-27, S.No.285) No59.059.012.0FalseNoneNoneFalseNoneFalse708.00
3248453112395None12.73.1Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm (Vol.2, P.No.108, I.No.12.73.1) No51.9251.924.0FalseNoneNoneFalseNoneFalse207.680
3248454112395None12.60Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Vol.2, P.No.107, I.No.12.60) No1241.361241.362.0FalseNoneNoneFalseNoneFalse2482.720
3248455112395None12.63Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete (Vol.2, P.No.107, I.No.12.63) No153.4153.42.0FalseNoneNoneFalseNoneFalse306.80
3248456112395None8.83Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications. (Vol.2, P.No. , I.No.8.83) Sqm1460.841460.846.03FalseNoneNoneFalseNoneFalse8808.86520
3248457112395None3.6Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum581.74581.7467.5FalseNoneNoneFalseNoneFalse39267.450
3248458112395None9.25Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sqm944.0944.0450.0FalseNoneNoneFalseNoneFalse424800.00
17177661220000NoneNoneBuildingsFor Electrical work39569.84
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3248459112396None1.8.2Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm . etc. as required. 25mm Mtr41.341.330.0FalseNoneNoneFalseNoneFalse1239.00
3248460112396None1.6.6Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 4"x4"x3" ( 101x101x76mm) Each87.387.32.0FalseNoneNoneFalseNoneFalse174.60
3248461112396None2.1.2Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Using class A Materials b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point464.9464.92.0FalseNoneNoneFalseNoneFalse929.80
3248462112396None2.1.3Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point672.6672.62.0FalseNoneNoneFalseNoneFalse1345.20
3248463112396None2.3.2Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 sqmm Mtr30.730.7125.0FalseNoneNoneFalseNoneFalse3837.50
3248464112396None2.3.3Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments" 2.5 sqmm Mtr49.649.615.0FalseNoneNoneFalseNoneFalse744.00
3248465112396None2.3.4Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4 sqmm Mtr74.3474.3475.0FalseNoneNoneFalseNoneFalse5575.50
3248466112396None3.4.1Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall" 1-3WayEach162.8162.81.0FalseNoneNoneFalseNoneFalse162.80
3248467112396None3.4.4Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall" 8Way Each308.0308.01.0FalseNoneNoneFalseNoneFalse308.00
3248468112396None3.5.1Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box Group-A 1 to 2 ModuleEach161.7161.71.0FalseNoneNoneFalseNoneFalse161.70
3248469112396None3.5..5Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box." Group-A 8MouduleEach335.1335.11.0FalseNoneNoneFalseNoneFalse335.10
3248470112396None3.6.1Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Using Group "A" materials 6Amps one way. Each120.4120.42.0FalseNoneNoneFalseNoneFalse240.80
3248471112396None3.6.4Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Using Group "A" materials Stepped Fan Regulator. Each421.26421.262.0FalseNoneNoneFalseNoneFalse842.520
3248472112396None3.6.7Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each212.4212.41.0FalseNoneNoneFalseNoneFalse212.40
3248473112396None3.6.9Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each384.68384.681.0FalseNoneNoneFalseNoneFalse384.680
3248474112396None3.6.10Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each278.48278.482.0FalseNoneNoneFalseNoneFalse556.960
3248475112396None3.6.3Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. Each201.78201.782.0FalseNoneNoneFalseNoneFalse403.560
3248476112396None11.3.2Supplying of feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. years Warranty against any manufacturing defect working under standard electrical condition.12.3.2 LED light fitting 1 x 4 20/22 w EachEach814.2814.23.0FalseNoneNoneFalseNoneFalse2442.60
3248477112396None5.7.2Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32AmpsEach284.4284.41.0FalseNoneNoneFalseNoneFalse284.40
3248478112396None5.18.8Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door a) 4Way TP &N Each3591.93591.91.0FalseNoneNoneFalseNoneFalse3591.90
3248479112396None51.01GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg HESCOM SR No876.7876.71.0FalseNoneNoneFalseNoneFalse876.70
3248480112396None51.03Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each HESCOM SR No797.7797.71.0FalseNoneNoneFalseNoneFalse797.70
3248481112396None51.03Good Quality Salt for grounding purposes packed in 50 Kg gunny bag HESCOM SR Bag365.8365.81.0FalseNoneNoneFalseNoneFalse365.80
3248482112396None1.6.2Digging of Pit for providing GI Pipe type Earthing LABOUR RATE HESCOM SR Hard Soil Per Pit3528.23528.21.0FalseNoneNoneFalseNoneFalse3528.20
3248483112396None7.3.1.1Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved. 48" Sweep (1200mm) Regular modelEach3521.13521.12.0FalseNoneNoneFalseNoneFalse7042.20
3248484112396None5.6.1Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 8"x6"1.5"Each102.7102.71.0FalseNoneNoneFalseNoneFalse102.70
3248485112396None5.6.4Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 12"x12"2"Each213.6213.61.0FalseNoneNoneFalseNoneFalse213.60
3248486112396None13.7.1Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076"" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall / ceiling / Rafter / GirdersEach144.0144.05.0FalseNoneNoneFalseNoneFalse720.00
3248487112396None13.11Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each371.7371.72.0FalseNoneNoneFalseNoneFalse743.40
3248488112396None1.9.1Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely 20mm Point wiring using Copper wire with switch. Mtr22.422.42.0FalseNoneNoneFalseNoneFalse44.80
3248489112396None5.18.1Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. 6-32Amps SP Each489.7489.71.0FalseNoneNoneFalseNoneFalse489.70
3248490112396None5.18.4Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. 6-32 Amps DPEach872.02872.021.0FalseNoneNoneFalseNoneFalse872.020
generalCriterionList
createdTsversioncreatedDatemodifiedDatecriterionTypedescriptiontenderEligibilityCriterionDocumentList
17177661240000NoneNoneELIGIBILITYTenders from Joint ventures are not acceptable.None
17177661240001NoneNoneELIGIBILITYBidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.None
17177661240000NoneNoneELIGIBILITYBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.None
17177661240000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.None
17177661240000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17178650060000NoneNoneELIGIBILITYBidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.None
17178650110000NoneNoneELIGIBILITYTender invited only for eligible contractors registered under Karnataka Public Works DeptNone
17178650150000NoneNoneELIGIBILITYConditional tenders will not be accepted.None
17178650200000NoneNoneELIGIBILITYThe Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.None
17178650240000NoneNoneELIGIBILITYFinancial Year will be reckoned as the period between first day of April and Thiry first day of March of succeeding year(both days inclusive)None
17178650290000NoneNoneELIGIBILITYAll the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.None
17178650330000NoneNoneELIGIBILITYThe tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder.None
17178650370000NoneNoneELIGIBILITYThe Employer reserves the right to Reject any or all Tenders without assigning any reasonNone
17178650420000NoneNoneELIGIBILITYThe Department is not responsible for any delay in accessing e-procurement portalNone
17178650470000NoneNoneELIGIBILITYTenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation.None
17178650510000NoneNoneELIGIBILITYAll materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.None
17178650560000NoneNoneELIGIBILITYThe items quoted shall include cost of Royalty charges on constructive materials and other taxes as per the rates prevailing Govt. Orders at the time of execution and including all the cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machinary and equipments, etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.None
17178650610000NoneNoneELIGIBILITYRoyalty on construction materials and other taxes will be deducted as per prevailing Govt ordersNone
17178650650000NoneNoneELIGIBILITYAll the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose.None
17178650700000NoneNoneELIGIBILITYPhysical quantities requirement to qualify the Tenderer is 80% of the estimated quantity as per Govt Order No. .PW/630/CRM/2014 Bangalore Dated: 17-11-2014None
17178650740000NoneNoneELIGIBILITYDepartment will not supply any materials.None
17178650780000NoneNoneELIGIBILITYThe cost of the Tender form shall not be refundable.None
17178650820000NoneNoneELIGIBILITYFurther particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Belagavi during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.None
17178650870000NoneNoneELIGIBILITYThe Tenderer must be present during opening of tender and submit uploaded documents duly attested by Gazzeted Officer not below the rank of Executive Engineer and also produce original documents for confirmation at the time of opening.None
17178650910000NoneNoneELIGIBILITYThe contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 in respect of the employees engaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund.None
17178650960000NoneNoneELIGIBILITYAs per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.None
17178651000000NoneNoneELIGIBILITYTHE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA. ANY JUNK, SUPERFLUOS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTED.None
17178651040000NoneNoneELIGIBILITYThe Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.None
17178651090000NoneNoneELIGIBILITYThe item rates are inclusive of all other charges.None
17178651140000NoneNoneELIGIBILITYUnder this contract, the GST is included in the item wise basic rates, the rates quoted by the Contractor shall be deemed to be inclusive of GST.None
17178651190000NoneNoneELIGIBILITYThe contractor shall quote the rates with adding GST for either materials, labours or works contract (Service). GST will not be paid separately to the contractor under this work.None
17178651220000NoneNoneELIGIBILITYThe Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.None
17178651270000NoneNoneELIGIBILITYFinancial turover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification CriteriaNone
17178651330000NoneNoneELIGIBILITYThe Project Completion period is 06 (Six) months and the Tenderer should maintain work during the defect liability period, which is (1) One year after successful completion of the work. (including Monsoon).None
17178651380000NoneNoneELIGIBILITYAppeal - As per the Govt. ltr no 572/CRM/2020/PWD-COMM-1-PWD-SEC, dated 09.10.2020 the Appeals received in e-procurement as per KTPP Act / Rules within the stipulated time will only be considered. Any written Appeal Received shall not be considered.None
17178651470000NoneNoneELIGIBILITYThe tenderer should be a KPWD registered Class-IV and Above ContractorNone
17178651510000NoneNoneELIGIBILITYUnique Document Identification Number (UDIN) for Practicing Chartered Account is PrefferedNone
17178651620000NoneNoneELIGIBILITYTenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to (AxNx5.00 - B) A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. 0.50 Year where B equal to Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.50 Year form the probable date of Award of this contract.None
17178651680000NoneNoneELIGIBILITYTo qualify for award of this contract, each Tenderer in its name should have in the last five years Period i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 achieved in at least one financial years an average financial turnover of Rs. 15.09 Lakhs (in all classes of civil engineering construction works only)None
17178651750000NoneNoneELIGIBILITYThe Tenderer shall obtain the similar work done Any Construction work certificate within the financial years of 2019-20 to 2023-24 (25% of the Amount Put to Tender) i.e., Rs. 3.77 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer)and scan the Original Certificate and attach the scanned file to the BidNone
17178651880000NoneNoneELIGIBILITYThe EMD of Rs.18,900.00 shall be paid in full through e-payment in favour of Executive Engineer, PWD Belagavi Division, BelagaviNone
preQualCriterionListNone
technicalCriterionList
createdTsversioncreatedDatemodifiedDatedescriptioncriterionCategoryTextcriterionTypeOthersValuetenderTechnicalCriterionDocumentList
NoneNoneNoneNoneThe Tenderer shall obtain the similar work done Any Construction work certificate within the financial years of 2019-20 to 2023-24 (25% of the Amount Put to Tender) i.e., Rs. 3.77 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer)and scan the Original Certificate and attach the scanned file to the BidPast ExperienceNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneWork Done Certificate
NoneNoneNoneNoneTo qualify for award of this contract, each Tenderer in its name should have in the last five years Period i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 achieved in at least one financial years an average financial turnover of Rs. 15.09 Lakhs (in all classes of civil engineering construction works only)Capabilities of VendorNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneAudited CA Certificate of Annual Turnover
NoneNoneNoneNoneTenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to (AxNx5.00 - B) A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. 0.50 Year where B equal to Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.50 Year form the probable date of Award of this contract.Capabilities of VendorNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Calculation Sheet on letter head
NoneNoneNoneNoneThe EMD of Rs.18,900.00 shall be paid in full through e-payment in favour of Executive Engineer, PWD Belagavi Division, BelagaviOthersEMD
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Through e-payment
NoneNoneNoneNoneThe tenderer should be a KPWD registered Class-IV and Above ContractorOthersPWD Registration Certificate
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNonePWD Registration Certificate (Class I/II/III/IV)
NoneNoneNoneNoneName and Address Telephone Nos. Fax Nos. and email ID of the Tenderers and BankersOthersBankers Address
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Information on the Letter Head of the tenderer
tenderCriterionDocumentList
documentNameoptionaldocumentTypeText
Annual Turnover Certificate from CA from 2019-20 to 2023-24TrueTechnical Bid
The tenderer should be a KPWD registered Class-IV and Above ContractorTrueTechnical Bid
Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste reserved category as prescribed in the tender document.TrueTechnical Bid
The Contractor belonging to the Scheduled Caste/Scheduled Tribe shall be DOMICILE of the State of Karnataka for more than 10 years and shall up load Residential / Domicile Certificate issued by the competent Authority.TrueTechnical Bid
Work done certificate for similar nature of Work from Competant authority Rank of Executive Engineer & aboveTrueTechnical Bid
Name and Address of Contractor for CommunicationTrueTechnical Bid
UDIN is PrefferedTrueTechnical Bid
List of ongoing works/ Works in HandTrueTechnical Bid
Bid capacity on Letter headTrueTechnical Bid
tenderWorkLocationList
tenderAddressNone
tenderRecallDTONone