createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718019438308 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2940.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 24-06-2024 16:00:00 tenderQueryClose 19-06-2024 16:00:00 technicalBidOpen 26-06-2024 16:00:00 publishedDate 10-06-2024 19:54:44 publishedByPost KHB_EE_CO_BNG publishedByUser KPE11677 - SHIVASHANKARAPPA K H bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 20-06-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVASHANKARAPPA K H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8022273511 tenderSupplierList None
tenderSchedule	createdTs 1718019438335 version 7 createdDate None modifiedDate None tenderNumber KHB/2024-25/BD/WORK_INDENT238 title Construction of Post Metric Girls Hostel 2nd Phase at K R Pet, Mandya District description Construction of Post Metric Girls Hostel 2nd Phase at K R Pet, Mandya District category WORKS categoryText Works ecv 11759094.00 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 11759094.0 groupOverheadTotal None fileNumber 108/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718019438000 0 None None Buildings Construction of Post Metric Medical & Engineering Girls Hostel 2nd Phase at K R Pet, Mandya District 11759094.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3261391 112977 None code01 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 70% ON CONCRETE ITEM) Cum 12460.28 12460.28 7.61 False None None False None False 94822.7308 0 3261392 112977 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 70% ON CONCRETE ITEM) Cum 12581.2 12581.2 3.97 False None None False None False 49947.364 0 3261393 112977 None code03 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 60% ON CONCRETE ITEM) Cum 11726.16 11726.16 8.47 False None None False None False 99320.5752 0 3261394 112977 None code04 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 60% ON CONCRETE ITEM) -Terrace Floor Cum 11841.13 11841.13 0.49 False None None False None False 5802.1537 0 3261395 112977 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates(60% shuttering charge) Cum 10653.3 10653.3 7.1 False None None False None False 75638.43 0 3261396 112977 None code06 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates(60% shuttering charge) Cum 10757.88 10757.88 0.24 False None None False None False 2581.8912 0 3261397 112977 None code07 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1403.15 1403.15 346.66 False None None False None False 486415.979 0 3261398 112977 None code08 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications-Terrace Floor Sqm 1417.17 1417.17 104.88 False None None False None False 148632.7896 0 3261399 112977 None code09 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1182.5 1182.5 14.49 False None None False None False 17134.425 0 3261400 112977 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) Cum 10993.28 10993.28 26.98 False None None False None False 296598.6944 0 3261401 112977 None code11 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 30% ON CONCRETE ITEM) Cum 10626.84 10626.84 0.5 False None None False None False 5313.42 0 3261402 112977 None code12 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 93.92 93.92 10563.7926 False None None False None False 992151.400992 0 3261403 112977 None code13 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104580.0 104580.0 0.51 False None None False None False 53335.8 0 3261404 112977 None code14 providing & fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum Ti02 (Titanium Dioxide) at 6PHR with TPE( Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with G reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) Sqm 6878.55 6878.55 32.4 False None None False None False 222865.02 0 3261405 112977 None code15 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with G reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 3488.1 3488.1 14.4 False None None False None False 50228.64 0 3261406 112977 None code16 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-with both side prelam Sqm 2534.0 2534.0 6.3 False None None False None False 15964.2 0 3261407 112977 None code17 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 176.4 176.4 810.0 False None None False None False 142884.0 0 3261408 112977 None code18 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 126.0 126.0 10.0 False None None False None False 1260.0 0 3261409 112977 None code19 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1104.6 1104.6 10.0 False None None False None False 11046.0 0 3261410 112977 None code20 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. No 248.85 248.85 20.0 False None None False None False 4977.0 0 3261411 112977 None code21 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. No 136.5 136.5 30.0 False None None False None False 4095.0 0 3261412 112977 None code22 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.-125x65x2.12mm. No 57.75 57.75 40.0 False None None False None False 2310.0 0 3261413 112977 None code23 Providing and fixing MS Hold fasts No 52.5 52.5 40.0 False None None False None False 2100.0 0 3261414 112977 None code24 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete Sqm 339.15 339.15 163.86 False None None False None False 55573.119 0 3261415 112977 None code25 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 384.3 384.3 699.81 False None None False None False 268936.983 0 3261416 112977 None code26 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 309.75 309.75 60.26 False None None False None False 18665.535 0 3261417 112977 None code27 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 412.34 412.34 355.79 False None None False None False 146706.4486 0 3261418 112977 None code28 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 16.39 False None None False None False 106991.4615 0 3261419 112977 None code29 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)--M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Basic rate: 6492.00 Cum 7328.85 7328.85 163.86 False None None False None False 1200905.361 0 3261420 112977 None code30 Providing 12 mm cement plaster with Cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete Sqm 345.93 345.93 163.86 False None None False None False 56684.0898 0 3261421 112977 None code31 Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2160.21 2160.21 0.52 False None None False None False 1123.3092 0 3261422 112977 None code32 Providing and laying flamed finised Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2641.09 2641.09 45.2 False None None False None False 119377.268 0 3261423 112977 None code33 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.-- Size of Tile (600X600) mm Sqm 1226.3 1226.3 147.96 False None None False None False 181443.348 0 3261424 112977 None code34 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 952.12 952.12 10.1 False None None False None False 9616.412 0 3261425 112977 None code35 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1184.53 1184.53 83.37 False None None False None False 98754.2661 0 3261426 112977 None code36 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. Sqm 4582.81 4582.81 4.68 False None None False None False 21447.5508 0 3261427 112977 None code37 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 107.1 107.1 615.29 False None None False None False 65897.559 0 3261428 112977 None code38 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 169.22 169.22 1664.33 False None None False None False 281637.9226 0 3261429 112977 None code39 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 186.35 186.35 273.86 False None None False None False 51033.811 0 3261430 112977 None code40 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 306.31 306.31 41.08 False None None False None False 12583.2148 0 3261431 112977 None code41 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. Sqm 59.98 59.98 37.44 False None None False None False 2245.6512 0 3261432 112977 None code42 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. Sqm 60.56 60.56 3.74 False None None False None False 226.4944 0 3261433 112977 None code43 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.59 144.59 37.44 False None None False None False 5413.4496 0 3261434 112977 None code44 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:-PVC pipes 110mm dia., 6 kg/sqcm & class 3 Mtr 440.18 440.18 44.0 False None None False None False 19367.92 0 3261435 112977 None code45 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 875.01 875.01 163.86 False None None False None False 143379.1386 0 3261436 112977 None code46 KSRB 15.8.3 Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanized iron of nominal thickness 0.35mm with a zinc coating of 120gms per Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment) Mtr 47.12 47.12 208.38 False None None False None False 9818.8656 0 3261437 112977 None code47 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required-White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests No 5230.76 5230.76 1.0 False None None False None False 5230.76 0 3261438 112977 None code48 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid No 6401.37 6401.37 1.0 False None None False None False 6401.37 0 3261439 112977 None code49 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer No 3069.49 3069.49 2.0 False None None False None False 6138.98 0 3261440 112977 None code50 Providing and fixing 100 mm sand cast Iron grating for gully trap. No 50.34 50.34 4.0 False None None False None False 201.36 0 3261441 112977 None code51 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. No 776.46 776.46 4.0 False None None False None False 3105.84 0 3261442 112977 None code52 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. No 906.07 906.07 4.0 False None None False None False 3624.28 0 3261443 112977 None code53 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-25mm nominal bore No 587.08 587.08 1.0 False None None False None False 587.08 0 3261444 112977 None code54 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)-32mm nominal bore No 640.46 640.46 1.0 False None None False None False 640.46 0 3261445 112977 None code55 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1306.62 1306.62 2.0 False None None False None False 2613.24 0 3261446 112977 None code56 Towel rail-600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. No 531.22 531.22 4.0 False None None False None False 2124.88 0 3261447 112977 None code57 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 50 mm dia Mtr 836.45 836.45 10.0 False None None False None False 8364.5 0 3261448 112977 None code58 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 32 mm dia Mtr 428.4 428.4 10.0 False None None False None False 4284.0 0 3261449 112977 None code59 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 25 mm dia Mtr 340.58 340.58 10.0 False None None False None False 3405.8 0 3261450 112977 None code60 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 20 mm dia Mtr 259.18 259.18 10.0 False None None False None False 2591.8 0 3261451 112977 None code61 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Ltr 4.28 4.28 5000.0 False None None False None False 21400.0 0 3261452 112977 None code62 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work- In all kinds of soils Depth upto 3 m-All soils Cum 107.1 107.1 80.92 False None None False None False 8666.532 0 3261453 112977 None code63 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work- In all kinds of soils Depth upto 3 m-Hard Soil Cum 381.15 381.15 17.21 False None None False None False 6559.5915 0 3261454 112977 None code64 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fineaggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 7.31 False None None False None False 43474.032 0 3261455 112977 None code65 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 8% ON CONCRETE ITEM) Cum 7129.46 7129.46 5.74 False None None False None False 40923.1004 0 3261456 112977 None code66 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other---- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) Cum 9979.2 9979.2 10.4 False None None False None False 103783.68 0 3261457 112977 None code67 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 16.29 False None None False None False 8107.533 0 3261458 112977 None code68 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)-- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 70% ON CONCRETE ITEM) Cum 12214.76 12214.76 7.04 False None None False None False 85991.9104 0 3261459 112977 None code69 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 8% ON CONCRETE ITEM) Cum 7129.46 7129.46 5.74 False None None False None False 40923.1004 0 3261460 112977 None code70 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other---- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 50% ON CONCRETE ITEM) Cum 9979.2 9979.2 10.4 False None None False None False 103783.68 0 3261461 112977 None code71 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 16.29 False None None False None False 8107.533 0 3261462 112977 None code72 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1292.55 1292.55 145.8 False None None False None False 188453.79 0 3261463 112977 None code73 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (RATE INCLUDING CENTERING 60% ON CONCRETE ITEM) Cum 9465.38 9465.38 1.37 False None None False None False 12967.5706 0 3261464 112977 None code74 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 9979.2 9979.2 10.4 False None None False None False 103783.68 0 3261465 112977 None code75 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-incharge. Sqm 471.45 471.45 328.32 False None None False None False 154786.464 0 3261466 112977 None code76 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in charge. Sqm 182.7 182.7 328.32 False None None False None False 59984.064 0 3261467 112977 None code77 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : vol- 2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 25.02 False None None False None False 147406.581 0 3261468 112977 None code78 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/mm2 with tape (0.52 mm thick) and weight 43.478 g/m (cost of M.S. angle, C.C. blocks shall be paid separately) Mtr 331.8 331.8 91.2 False None None False None False 30260.16 0 3261469 112977 None code79 Supplying & Fixing at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.-Y-ISA Angle-50mmx50mmx3mm Kg 118.65 118.65 27.0 False None None False None False 3203.55 0 3261470 112977 None code80 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding issue rate 143 Kg 176.4 176.4 455.0 False None None False None False 80262.0 0 3261471 112977 None code81 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Kg 122.21 122.21 10250.2 False None None False None False 1252676.942 0 3261472 112977 None code82 Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specifications-Upto 62.50KVA Each 754780.95 754780.95 1.0 False None None False None False 754780.95 0 3261473 112977 None code83 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.-short point upto 3 mtr from tapping point to outlet via switch. Point 282.45 282.45 13.0 False None None False None False 3671.85 0 3261474 112977 None code84 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch Point 397.95 397.95 25.0 False None None False None False 9948.75 0 3261475 112977 None code85 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch Point 582.75 582.75 100.0 False None None False None False 58275.0 0 3261476 112977 None code86 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 710.85 710.85 20.0 False None None False None False 14217.0 0 3261477 112977 None code87 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches Point 1038.45 1038.45 6.0 False None None False None False 6230.7 0 3261478 112977 None code88 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way Each 166.95 166.95 183.0 False None None False None False 30551.85 0 3261479 112977 None code89 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 231.0 231.0 50.0 False None None False None False 11550.0 0 3261480 112977 None code90 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 334.95 334.95 30.0 False None None False None False 10048.5 0 3261481 112977 None code91 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 169.05 169.05 183.0 False None None False None False 30936.15 0 3261482 112977 None code92 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 245.7 245.7 50.0 False None None False None False 12285.0 0 3261483 112977 None code93 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10 to 12 Module Each 274.05 274.05 30.0 False None None False None False 8221.5 0 3261484 112977 None code94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch Each 107.1 107.1 400.0 False None None False None False 42840.0 0 3261485 112977 None code95 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch Each 174.3 174.3 10.0 False None None False None False 1743.0 0 3261486 112977 None code96 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket Each 179.55 179.55 200.0 False None None False None False 35910.0 0 3261487 112977 None code97 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 374.85 374.85 45.0 False None None False None False 16868.25 0 3261488 112977 None code98 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 189.0 189.0 20.0 False None None False None False 3780.0 0 3261489 112977 None code99 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 393.75 393.75 5.0 False None None False None False 1968.75 0 3261490 112977 None code100 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 247.8 247.8 50.0 False None None False None False 12390.0 0 3261491 112977 None code101 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB).The entire plug and socket shall be mounted in a thermoplastic I powder coated metal box & wired Completely. 20 A Each 916.65 916.65 2.0 False None None False None False 1833.3 0 3261492 112977 None code102 Supplying and fixing of MODULAR MCB Devices(Tripper) With Breaking capacity of 6KA. 16 - 32 A SP Each 199.5 199.5 2.0 False None None False None False 399.0 0 3261493 112977 None code103 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick Mtr 69.3 69.3 3500.0 False None None False None False 242550.0 0 3261494 112977 None code104 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick Mtr 81.9 81.9 150.0 False None None False None False 12285.0 0 3261495 112977 None code105 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2.5mm thick Mtr 108.15 108.15 50.0 False None None False None False 5407.5 0 3261496 112977 None code106 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick Mtr 71.4 71.4 1000.0 False None None False None False 71400.0 0 3261497 112977 None code107 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick Mtr 82.95 82.95 500.0 False None None False None False 41475.0 0 3261498 112977 None code108 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick Mtr 103.95 103.95 25.0 False None None False None False 2598.75 0 3261499 112977 None code109 Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box No 58.8 58.8 130.0 False None None False None False 7644.0 0 3261500 112977 None code110 Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep junction box No 64.05 64.05 40.0 False None None False None False 2562.0 0 3261501 112977 None code111 Supplying And Fixing Metal Fan Box with Round Hook. No 122.85 122.85 100.0 False None None False None False 12285.0 0 3261502 112977 None code112 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm Mtr 27.3 27.3 2200.0 False None None False None False 60060.0 0 3261503 112977 None code113 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm Mtr 44.1 44.1 2500.0 False None None False None False 110250.0 0 3261504 112977 None code114 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm Mtr 66.15 66.15 500.0 False None None False None False 33075.0 0 3261505 112977 None code115 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm Mtr 96.6 96.6 900.0 False None None False None False 86940.0 0 3261506 112977 None code116 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure-8waySPN Each 1946.7 1946.7 2.0 False None None False None False 3893.4 0 3261507 112977 None code117 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP Each 435.75 435.75 22.0 False None None False None False 9586.5 0 3261508 112977 None code118 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP Each 775.95 775.95 2.0 False None None False None False 1551.9 0 3261509 112977 None code119 Supplying, fixing and wiring Residential Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16A-25A 2 Pole Each 4490.85 4490.85 2.0 False None None False None False 8981.7 0 3261510 112977 None code120 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fighting 1x4'-20/22w Each 724.5 724.5 65.0 False None None False None False 47092.5 0 3261511 112977 None code121 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-12 W6500k Each 282.45 282.45 2.0 False None None False None False 564.9 0 3261512 112977 None code122 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1566.6 1566.6 8.0 False None None False None False 12532.8 0 3261513 112977 None code123 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48"sweep(1200mm) Regular model Each 3133.2 3133.2 47.0 False None None False None False 147260.4 0 3261514 112977 None code124 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 45.0 False None None False None False 8079.75 0 3261515 112977 None code125 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-on wall/ceiling/rafter/girders Each 128.1 128.1 62.0 False None None False None False 7942.2 0 3261516 112977 None code126 Supplying & laying of of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2)Armouring wires dia and Resistivity as per IS-3975-95 sqmm, ( 54 GI Wires-2.5mm dia) Km 1160899.0 1160899.0 0.7 False None None False None False 812629.3 0 3261517 112977 None code127 Supplying 11 kV, Jointing & Cable Termination Kit as per IS-13573- Heat Shrinkable Type Transition Jointing Kit for XLPE Cable- 3x95Sqmm Set 5931.0 5931.0 2.0 False None None False None False 11862.0 0 3261518 112977 None code128 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.in hard soil Cum 260.0 260.0 28.0 False None None False None False 7280.0 0 3261519 112977 None code129 Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a all lead Cum 58.0 58.0 30.0 False None None False None False 1740.0 0 3261520 112977 None code130 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick Mtr 69.3 69.3 125.0 False None None False None False 8662.5 0 3261521 112977 None code131 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick Mtr 81.9 81.9 30.0 False None None False None False 2457.0 0 3261522 112977 None code132 Supply of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles) Set 21974.4 21974.4 2.0 False None None False None False 43948.8 0 3261523 112977 None code133 Erection DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL Set 5640.6 5640.6 2.0 False None None False None False 11281.2 0 3261524 112977 None code134 Supply& erection of 11 kV, 45 KN Polymeric Insulator No 195.3 195.3 12.0 False None None False None False 2343.6 0 3261525 112977 None code135 Supply of Guy Set Complete with No. 15 Strain Insulator Set 1228.5 1228.5 3.0 False None None False None False 3685.5 0 3261526 112977 None code136 Erection of Guy Set Complete with No. 15 Strain Insulator Set 622.65 622.65 3.0 False None None False None False 1867.95 0 3261527 112977 None code137 Supply of Spiral Earth Electrode No 250.95 250.95 3.0 False None None False None False 752.85 0 3261528 112977 None code138 Erection of Spiral Earth Electrode No 97.65 97.65 3.0 False None None False None False 292.95 0 3261529 112977 None code139 Supply& fixing of Guy concreting with Boulders, Mud and Sand No 262.5 262.5 3.0 False None None False None False 787.5 0 3261530 112977 None code140 Supply of Caution/Danger Board No 157.5 157.5 2.0 False None None False None False 315.0 0 3261531 112977 None code141 Fixing of Caution/Danger Board No 84.0 84.0 2.0 False None None False None False 168.0 0 3261532 112977 None code142 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire Each 93.45 93.45 3.0 False None None False None False 280.35 0 3261533 112977 None code143 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire Each 44.1 44.1 3.0 False None None False None False 132.3 0 3261534 112977 None code144 Supply and fixing of 11 kV, 400 Amps Double Break GOS Set 21974.4 21974.4 3.0 False None None False None False 65923.2 0 3261535 112977 None code145 Fixing of 11 kV, 400 Amps Double Break GOS Set 1274.7 1274.7 3.0 False None None False None False 3824.1 0 3261536 112977 None code146 Supply of H-Frame for mounting GOS No 4348.6 4348.6 2.0 False None None False None False 8697.2 0 3261537 112977 None code147 fixing of H-Frame for mounting GOS No 339.15 339.15 2.0 False None None False None False 678.3 0 3261538 112977 None code148 Supply of DOLO Cut Out -Set/3 Nos Set 6165.6 6165.6 1.0 False None None False None False 6165.6 0 3261539 112977 None code149 Erection of DOLO Cut Out -Set/3 Nos Set 248.85 248.85 1.0 False None None False None False 248.85 0 3261540 112977 None code150 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 Set 7429.8 7429.8 1.0 False None None False None False 7429.8 0 3261541 112977 None code151 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 Set 1829.1 1829.1 2.0 False None None False None False 3658.2 0 3261542 112977 None code152 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL Set 678.3 678.3 2.0 False None None False None False 1356.6 0 3261543 112977 None code153 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL Set 285.6 285.6 2.0 False None None False None False 571.2 0 3261544 112977 None code154 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) No 215.25 215.25 6.0 False None None False None False 1291.5 0 3261545 112977 None code155 Supply and fixing of 11 kV, 45 KN Polymeric Insulator No 195.3 195.3 6.0 False None None False None False 1171.8 0 3261546 112977 None code156 Supply of Guy Set Complete with No. 15 Strain Insulator Set 1228.5 1228.5 2.0 False None None False None False 2457.0 0 3261547 112977 None code157 Erection of Guy Set Complete with No. 15 Strain Insulator Set 622.65 622.65 2.0 False None None False None False 1245.3 0 3261548 112977 None code158 Supply of Rabbit ACSR Conductor Km 48545.7 48545.7 0.25 False None None False None False 12136.425 0 3261549 112977 None code159 Erection of Rabbit ACSR Conductor Km 4579.05 4579.05 0.25 False None None False None False 1144.7625 0 3261550 112977 None code160 Supply and fixing of PG Clamps for Rabbit Conductor No 107.1 107.1 15.0 False None None False None False 1606.5 0 3261551 112977 None code161 Supply of Spiral Earth Electrode No 250.95 250.95 2.0 False None None False None False 501.9 0 3261552 112977 None code162 Erection of Spiral Earth Electrode No 97.65 97.65 2.0 False None None False None False 195.3 0 3261553 112977 None code163 Supply of EG Stirrups with GI wire lacing - set/2 Nos. Set 289.8 289.8 2.0 False None None False None False 579.6 0 3261554 112977 None code164 Erection of EG Stirrups with GI wire lacing-set/2 Nos. Set 168.0 168.0 2.0 False None None False None False 336.0 0 3261555 112977 None code165 Guy concreting with Boulders, Mud and Sand No 262.5 262.5 2.0 False None None False None False 525.0 0 3261556 112977 None code166 Supply of Caution/Danger Board No 157.5 157.5 3.0 False None None False None False 472.5 0 3261557 112977 None code167 Erection of Caution/Danger Board No 84.0 84.0 3.0 False None None False None False 252.0 0 3261558 112977 None code168 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire Each 93.45 93.45 2.0 False None None False None False 186.9 0 3261559 112977 None code169 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire Each 44.1 44.1 2.0 False None None False None False 88.2 0 3261560 112977 None code170 supplying of DP Transformer Structure using PSCC Pole - 9 Mtr Long, 300 Kg WL (Including Cost of Poles) No 29051.4 29051.4 5.0 False None None False None False 145257.0 0 3261561 112977 None code171 supplying & fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) Set 215.25 215.25 4.0 False None None False None False 861.0 0 3261562 112977 None code172 supplying & fixing of 11 kV, 45 KN Polymeric Insulator Set 195.3 195.3 4.0 False None None False None False 781.2 0 3261563 112977 None code173 Supplying of Guy Set Complete with No. 15 Strain Insulator No 1228.5 1228.5 4.0 False None None False None False 4914.0 0 3261564 112977 None code174 Supplying of 11 kV/433V, 63 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with Oil No 91672.25 91672.25 3.0 False None None False None False 275016.75 0 3261565 112977 None code175 Supplying of Earthing materials pipe type for grounding (Single Electrode with accessories) Set 1815.45 1815.45 3.0 False None None False None False 5446.35 0 3261566 112977 None code176 Supplying of Caution/Danger Board No 157.5 157.5 1.0 False None None False None False 157.5 0 3261567 112977 None code177 supplying of Anti Climbing Device (12 Mtr GI Barbed Wire) Each 93.45 93.45 2.0 False None None False None False 186.9 0 3261568 112977 None code178 Supplying & fixing of GI Wire 8 SWG Kg 78.79 78.79 5.0 False None None False None False 393.95 0 3261569 112977 None code179 Supplying & fixing of Guy wire 7/10 SWG Kg 81.09 81.09 18.0 False None None False None False 1459.62 0 3261570 112977 None code180 Supplying & fixing of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA, Polymeric type with ground disconnector-set/3Nos Set 4989.6 4989.6 3.0 False None None False None False 14968.8 0 3261571 112977 None code181 a) Supplying of LT Protection Kit for 63 kVA No 2124.15 2124.15 3.0 False None None False None False 6372.45 0 3261572 112977 None code182 b) LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT-Al lead wire-95 sqmm Mtr 116.85 116.85 33.0 False None None False None False 3856.05 0 3261573 112977 None code183 ii) Heavy Duty Long Barrel Copper Lug - 95 Sqmm No 135.45 135.45 4.0 False None None False None False 541.8 0 3261574 112977 None code184 iii) PG Clamp - Rabbit to 95 Sqmm No 147.0 147.0 4.0 False None None False None False 588.0 0 3261575 112977 None code185 iv) Spacer for DTC Wiring No 44.1 44.1 8.0 False None None False None False 352.8 0 3261576 112977 None code186 v) Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) No 277.2 277.2 2.0 False None None False None False 554.4 0 3261577 112977 None code187 c) LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS -39) No 5905.2 5905.2 1.0 False None None False None False 5905.2 0 3261578 112977 None code188 d) LT Electronic Tri-Vector Meter 5 Amps, - 0.5/1.0 Accuracy Class No 3565.8 3565.8 1.0 False None None False None False 3565.8 0 3261579 112977 None code189 Supplying of 11 kV, Solid Core Type HG Fuse Unit-Set (3 Nos) Set 1122.45 1122.45 1.0 False None None False None False 1122.45 0 3261580 112977 None code190 suppying of 11 kV, 200 Amps, Single Break GOS Set 9922.5 9922.5 1.0 False None None False None False 9922.5 0 3261581 112977 None code191 Fixing of DP Transformer Structure using PSCC Pole - 9 Mtr Long, 300 Kg WL (Including Cost of Poles) No 7332.15 7332.15 1.0 False None None False None False 7332.15 0 3261582 112977 None code192 Fixing of Guy Set Complete with No. 15 Strain Insulator No 622.65 622.65 6.0 False None None False None False 3735.9 0 3261583 112977 None code193 Fixing of 11 kV/433V, 63 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with Oil No 1252.65 1252.65 1.0 False None None False None False 1252.65 0 3261584 112977 None code194 Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories) Set 996.45 996.45 3.0 False None None False None False 2989.35 0 3261585 112977 None code195 Fixing of Caution/Danger Board No 84.0 84.0 1.0 False None None False None False 84.0 0 3261586 112977 None code196 Fixing Anti Climbing Device (12 Mtr GI Barbed Wire) Each 44.1 44.1 2.0 False None None False None False 88.2 0 3261587 112977 None code197 Fixing of Guy concreting with Boulders, Mud and Sand No 262.5 262.5 4.0 False None None False None False 1050.0 0 3261588 112977 None code198 a) Fixing of LT Protection Kit for 63 kVA No 373.8 373.8 2.0 False None None False None False 747.6 0 3261589 112977 None code199 b) LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT Set 996.45 996.45 1.0 False None None False None False 996.45 0 3261590 112977 None code200 c) fixing of LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS -39) No 908.25 908.25 1.0 False None None False None False 908.25 0 3261591 112977 None code201 d) fixing of LT Electronic Tri-Vector Meter 5 Amps, - 0.5/1.0 Accuracy Class No 504.0 504.0 1.0 False None None False None False 504.0 0 3261592 112977 None code202 fixing of 11 kV, Solid Core Type HG Fuse Unit-Set (3 Nos) Set 248.85 248.85 1.0 False None None False None False 248.85 0 3261593 112977 None code203 Fixing of 11 kV, 200 Amps, Single Break GOS Set 1159.2 1159.2 1.0 False None None False None False 1159.2 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718019439000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718019439000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1718019439000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1718019439000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1718019439000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718019445000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1718019450000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1718019454000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1718019458000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1718019462000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1718019465000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1718019468000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1718019472000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1718019476000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1718019480000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1718019483000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1718019487000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1718019490000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1718019495000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1718019499000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of latest GST clearance certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None Income Tax returns & PAN Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1718028943000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None