createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1717758652472 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 720.00 emd 68400.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 17-06-2024 17:00:00 tenderQueryClose 17-06-2024 15:30:00 technicalBidOpen None publishedDate 10-06-2024 13:57:06 publishedByPost RDPR_EE_DIV_BLR publishedByUser KPE11866 - BADIGER PAMPATHY SURESHKUMAR bidValidityPeriod 90 noOfCalls 3 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson EE PRE DIVISION BALLARI splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392266173 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1717758652475 version 19 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT5391/CALL-3 title Construction of New NSQF New Center at GHPS and GHS Susheela nagar village in Sandur Taluk and Ballari Dist. description Construction of New NSQF New Center at GHPS and GHS Susheela nagar village in Sandur Taluk and Ballari Dist. category WORKS categoryText Works ecv 2861248.92 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 818 locationName RDPR Division Office Ballari provisionalAmount 3420000.0 groupOverheadTotal None fileNumber AEE/RDPR/SD/BLI/JE1/KKRDB/23-24/12
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1717758653000 0 None None Buildings Construction of NSQF New Center at GHPS and GHS school at Susheelanagar Village in Sandur Taluk of Ballari Dist. 2861248.92 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3246129 112319 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 65.9 False None None False None False 7057.89 0 3246130 112319 None code02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 110.4 False None None False None False 13678.56 0 3246131 112319 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 24.24 False None None False None False 152432.028 0 3246132 112319 None code04 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7170.28 7170.28 11.23 False None None False None False 80522.2444 0 3246133 112319 None code05 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11286.56 11286.56 1.64 False None None False None False 18509.9584 0 3246134 112319 None code06 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 20.8 False None None False None False 122544.24 0 3246135 112319 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 14.99 False None None False None False 100559.6655 0 3246136 112319 None code08 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9958.73 9958.73 4.37 False None None False None False 43519.6501 0 3246137 112319 None code09 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11286.56 11286.56 3.01 False None None False None False 33972.5456 0 3246138 112319 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 42.26 False None None False None False 11803.218 0 3246139 112319 None code11 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of bour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 84.8 False None None False None False 42204.96 0 3246140 112319 None code12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 24.67 False None None False None False 206424.9915 0 3246141 112319 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 6555.15 6555.15 1.78 False None None False None False 11668.167 0 3246142 112319 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11138.4 11138.4 5.73 False None None False None False 63823.032 0 3246143 112319 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10094.18 10094.18 0.36 False None None False None False 3633.9048 0 3246144 112319 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 16.38 False None None False None False 171044.055 0 3246145 112319 None code17 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Canal & Allied Works Tonne 94510.5 94510.5 3.74 False None None False None False 353469.27 0 3246146 112319 None code18 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 4701.9 4701.9 14.67 False None None False None False 68976.873 0 3246147 112319 None code19 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 144.9 144.9 151.2 False None None False None False 21908.88 0 3246148 112319 None code20 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 221.55 221.55 123.24 False None None False None False 27303.822 0 3246149 112319 None code21 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 267.75 267.75 76.21 False None None False None False 20405.2275 0 3246150 112319 None code22 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 366.45 366.45 289.45 False None None False None False 106068.9525 0 3246151 112319 None code23 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in ch Sqm 105.0 105.0 161.89 False None None False None False 16998.45 0 3246152 112319 None code24 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalen Sqm 2589.3 2589.3 109.13 False None None False None False 282570.309 0 3246153 112319 None code25 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications Sqm 1461.6 1461.6 5.4 False None None False None False 7892.64 0 3246154 112319 None code26 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 133.35 133.35 225.69 False None None False None False 30095.7615 0 3246155 112319 None code27 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 189.82 False None None False None False 34680.114 0 3246156 112319 None code28 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 33.01 False None None False None False 3985.9575 0 3246157 112319 None code29 Supply of chairs Each 1500.0 1500.0 10.0 False None None False None False 15000.0 0 3246158 112319 None code30 STAFF / OFFICE TABLE :Size 48” X 24” X 30” With One drawers and One Locker on the right side of the table with locking system. With leg section of 25 dia 20 gauge the top shall be of 20 mm thick laminated black board with wooden border around. The table shall be derusted premier coated with synthetic enamel paint. All components should be made of 20 Each 7000.0 7000.0 4.0 False None None False None False 28000.0 0 3246159 112319 None code31 STEEL SLOTTED ANGLE RACK:SIZE: 72HX36WX14D.Overall with 5plates shall be slotted angle of 40”x15”x2mm Panels of Size 36”x15”x20”g the panels should be fixed tothe upright by means of GI bolts of Size 8mmx16mm by providing 16 No’s of standard gussests at aorners. The rack shall be derusted primer coated &Spray Painted with synthetic enameles paint. Each 10000.0 10000.0 4.0 False None None False None False 40000.0 0 3246160 112319 None code32 STEEL ALMAIRAH 6' 1/2" Office type : Size:78”H x 35”W x 18”D (Including leg of 6”) fitted with four fixed shelves making five compartments double door with two way locking device and duplicate Keys, all joints outside and inside should be spot or arc welding and neatly finished by grinding. The almairah made by 18/20 gauge CR sheet.The outside corners should be properly bent to U shape of 25mm width to ensure good strength and the outer edge of U-bent of the door lengthwise should be double folder and neatly finished. The shelves front side should be bent to U shape neatly and finished to avoid any possible cuts to fingers and hand when handled. Longitudinal rib of 15.24 cm wide including bent to required shape should be provided and fixed to each door at its centre. The breadth of the shelf in the almairah should be to the entire width leaving about 12mm gap from the shutter when it is. closed. LOCKING DEVICE:Three way locking device with 10 gauge M.S. sheet for locking and leave plate and with locking rod of 10 mm dia with strong bracket at the top and bottom to hold the locking rod with six lever strong lick to be fixed. Handle should be made out of brass cast alloy with nickel chrome plated. Lock should be Good Quality. Each 20000.0 20000.0 1.0 False None None False None False 20000.0 0 3246161 112319 None code33 ELECTRICAL work: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junctionboxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using bindingwires and unused ways of junction boxes and pipe ends should becovered using PVC end enclosures, run with 18SWG GI fish wirewherever necessary 19/20 mm dia 2mm thick Mtr 69.3 69.3 100.0 False None None False None False 6930.0 0 3246162 112319 None code34 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junctionboxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using bindingwires and unused ways of junction boxes and pipe ends should becovered using PVC end enclosures, run with 18SWG GI fish wirewherever necessary 25 mm dia 2mm thick Mtr 81.9 81.9 100.0 False None None False None False 8190.0 0 3246163 112319 None code35 Supplying and fixing sheet Metal box made out of 18 SWG sheetmetal with necessary holes for cable/conduit entry as required with onecoat of primer of approved make etc 75x75x65mm Each 111.3 111.3 3.0 False None None False None False 333.9 0 3246164 112319 None code36 Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box Each 51.45 51.45 10.0 False None None False None False 514.5 0 3246165 112319 None code37 Supplying And Fixing Metal Fan Box with Round Hook. Nos 122.85 122.85 6.0 False None None False None False 737.1 0 3246166 112319 None code38 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete foreach outlet. A Short piont up to 3 Mtr from tapping piont out let via switch. Point 299.5 299.5 15.0 False None None False None False 4492.5 0 3246167 112319 None code39 Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete foreach outlet. A Short piont up to 6 Mtr from tapping piont out Point 413.7 413.7 15.0 False None None False None False 6205.5 0 3246168 112319 None code40 Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 Mtr 27.3 27.3 300.0 False None None False None False 8190.0 0 3246169 112319 None code41 Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 Mtr 44.1 44.1 300.0 False None None False None False 13230.0 0 3246170 112319 None code42 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate with requirednos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box 8 Module Each 298.2 298.2 3.0 False None None False None False 894.6 0 3246171 112319 None code43 Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 6Amps one way Each 107.1 107.1 30.0 False None None False None False 3213.0 0 3246172 112319 None code44 Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 Stepped fan regulator Each 374.85 374.85 6.0 False None None False None False 2249.1 0 3246173 112319 None code45 Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 16Amps one way switch Each 189.0 189.0 6.0 False None None False None False 1134.0 0 3246174 112319 None code46 Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket Each 247.8 247.8 3.0 False None None False None False 743.4 0 3246175 112319 None code47 Supplying and fixing 32A security and energy saving DP switchwith key tag suitable to operate on 230 V, 50Hz AC supply &completely wired on existing box Each 678.3 678.3 1.0 False None None False None False 678.3 0 3246176 112319 None code48 Miniature Circuit Breakers Supplying & fixing miniature circuit breakers on existing MCBdistribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 6-32 Amps SP Each 435.75 435.75 1.0 False None None False None False 435.75 0 3246177 112319 None code49 MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall/oodboard / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWGMS enclosure II - Double Door 8 Way SP & N Each 1946.7 1946.7 1.0 False None None False None False 1946.7 0 3246178 112319 None code50 Earth Electrode for Grounding Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia Job 3685.5 3685.5 1.0 False None None False None False 3685.5 0 3246179 112319 None code51 Ceiling Fans Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200mm) Regular model Each 3133.2 3133.2 6.0 False None None False None False 18799.2 0 3246180 112319 None code52 PVC Batten with LED Tubes Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI lessthan 80. Power Input: 220-240V@50/60Hz & Power factor lessthan0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standardelectrical condition LED light fighting 1 x4'- 20/22 w Each 724.5 724.5 4.0 False None None False None False 2898.0 0 3246181 112319 None code53 Fixing of Fan Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 330.75 330.75 6.0 False None None False None False 1984.5 0 3246182 112319 None code54 Bench Vice 125mm Steel Heavy-Duty Bench Vice 125mm 5 in 1 Nos 3000.0 3000.0 1.0 False None None False None False 3000.0 0 3246183 112319 None code55 Ruler (Steel) 30cm long Nos 20.0 20.0 4.0 False None None False None False 80.0 0 3246184 112319 None code56 Measuring tape measuring tape of 5 meter x 19 mm Nos 180.0 180.0 4.0 False None None False None False 720.0 0 3246185 112319 None code57 Micrometers Type-103-137, Range - 0-25mm Accuracy- Plus/minus2um , Mass-175g Measuring faces: Carbide tipped Nos 3200.0 3200.0 2.0 False None None False None False 6400.0 0 3246186 112319 None code58 Vernier Calipers 8" 200mm Digital LCD Caliper Vernier Gauge Micrometer Metal Housed Digital Vernier Caliper - 6 inch - 150 mm Nos 1050.0 1050.0 2.0 False None None False None False 2100.0 0 3246187 112319 None code59 Standard wire guage Imperial Wire Gauge Nos 250.0 250.0 2.0 False None None False None False 500.0 0 3246188 112319 None code60 Filler Guage Stainless steel Accuracy: (3+T/80)um Range: 0.03-1.00 mm Quantity of Leaves: 32 Length: 100 mm Nos 450.0 450.0 2.0 False None None False None False 900.0 0 3246189 112319 None code61 Dial Guage 0.001 mm X 1 mm dial gauge fitted with 8 jewels Nos 2200.0 2200.0 2.0 False None None False None False 4400.0 0 3246190 112319 None code62 Try square Metal Try Square - angle cut 45Deg/ 90Deg, Casting handle with hardened blade, Engraving graduation on blade. Size: 20.4 x 12.2 x 1.3 cm Nos 190.0 190.0 2.0 False None None False None False 380.0 0 3246191 112319 None code63 Line tester Multi Purpose Digital Tester with LCD Display and Neon Bulb MDTN-82 Nos 100.0 100.0 8.0 False None None False None False 800.0 0 3246192 112319 None code64 Ammeter (AC & DC) Electrodynamo meter type Nos 300.0 300.0 4.0 False None None False None False 1200.0 0 3246193 112319 None code65 Volt meter Product Type Moving Coil Range 300V , Size 72 mm Nos 200.0 200.0 4.0 False None None False None False 800.0 0 3246194 112319 None code66 Direct and for higher ranges through CT/1 A or 5 A Voltage (V): 110 V / 220 V/ 440 V and Through PT for Higher Voltage Size 96 x 96 mm, 144 x 144 mm Accuracy Watt meter: plus/minus1.5% of Full Scale Power Factor Meter: plus/minus 2 of Phase Angle Nos 2000.0 2000.0 2.0 False None None False None False 4000.0 0 3246195 112319 None code67 Energy meter analog (3-digital1) Electric KWH Meter Multi Tarif KWH Meter. Certification: CE/ROHS Reference Basic Current: 10(50)A Output Voltage: 127/230V Nos 500.0 500.0 4.0 False None None False None False 2000.0 0 3246196 112319 None code68 Ohmmeter Megger type Nos 6300.0 6300.0 2.0 False None None False None False 12600.0 0 3246197 112319 None code69 Aluminium wire Digital DMM - Current, Voltage, Capacitance, Frequency & Resistance Measurement., Frequency Range: 99.99-20.00 MHz, DC Voltage Range: 400mV/4/40/400/1000V, AC Current Accuracy: plus/minus(2.0%rdg + 4dgt), Duty Cycle: 0.1-99.9%, SP Function: Diode test, Audible Continuity, Data Hold. Nos 960.0 960.0 8.0 False None None False None False 7680.0 0 3246198 112319 None code70 Frequency meter Displays System Frequency Up to 50 hz. Nos 460.0 460.0 1.0 False None None False None False 460.0 0 3246199 112319 None code71 Power factor meter Power India Meters Single Phase Digital Multi-function Nos 750.0 750.0 1.0 False None None False None False 750.0 0 3246200 112319 None code72 Digital volt meter and ammeter Blue Red Dual LED Display Size: 48mm x 29mm x 21mm. Display color: Red & Blue LED (dual display). Display: 0.28" LED digital. Operating voltage: DC 4.5-30V. Measure voltage: DC 0-100V. Minimum resolution (V): 0.1V. Operating Current: greater than 20mA. Measure current: 10A (direct measurement, built-in shunt). Operating temperature: -10 to 65C Operating Humidity: 10 to 80% (non-condensing). Mounting cutout: 45.5mm x 26.5mm. Nos 550.0 550.0 1.0 False None None False None False 550.0 0 3246201 112319 None code73 Tachometer RPM gauge Nos 1590.0 1590.0 1.0 False None None False None False 1590.0 0 3246202 112319 None code74 Synchroscope Universal ppts Standard - 1248-5 Type: Electronic Synchroscope Meter Frequency Range: 35-70 Hz Input Voltage: 127/120V Front dimension: 96x96 Nos 2375.0 2375.0 1.0 False None None False None False 2375.0 0 3246203 112319 None code75 Electrician's Scissors Metal blade - high carbon steel Nos 200.0 200.0 4.0 False None None False None False 800.0 0 3246204 112319 None code76 Hand operated shearing machine Spring type Material - Cast Iron Height- 2.5 Feet Weight: 5-7 K Nos 2000.0 2000.0 1.0 False None None False None False 2000.0 0 3246205 112319 None code77 Pipe cutter Professional pipe cutting tool Type: Slip Joint Pliers, Handle Material : High quty aluminum alloy Nos 1550.0 1550.0 1.0 False None None False None False 1550.0 0 3246206 112319 None code78 Hacksaw frame with blade Tubular with Die cast handle. Fitted with 12" Chrome Alloy Steel Blade Nos 270.0 270.0 2.0 False None None False None False 540.0 0 3246207 112319 None code79 Electric Drill Machine with Drilling bit simple drill 10mm + 6hss bits+ 1 masonry bit, power: 300watts, rpm: 2300rpm, voltage-220, motor: copper, outer body: pvc and metal, domestic drilling machine Nos 960.0 960.0 1.0 False None None False None False 960.0 0 3246208 112319 None code80 Grinder 6" Grinder For Sharpening & Grinding used for sharpening and grinding with clamping base which attaches to any table or workbench with grinding wheel Nos 750.0 750.0 1.0 False None None False None False 750.0 0 3246209 112319 None code81 Chisel 12mm Chisel 12mm with Sturdy Wood Handle and chromium steel blade Nos 275.0 275.0 1.0 False None None False None False 275.0 0 3246210 112319 None code82 Chisel 36mm Chisel 36 mm with Sturdy Wood Handle and chromium steel blade Nos 325.0 325.0 1.0 False None None False None False 325.0 0 3246211 112319 None code83 Rasp file 8" Wood Rasp File Set with Rubber Grip + Plastic Handles - Includes Hand Cut Round, Half-round, and Flat Rasp File Kit Nos 300.0 300.0 1.0 False None None False None False 300.0 0 3246212 112319 None code84 Hand saw 14" handsaw with wooden handle Nos 300.0 300.0 2.0 False None None False None False 600.0 0 3246213 112319 None code85 Tennon saw File sharpened teeth with plain hardened cutting edges. Impact resistant handle. Nos 800.0 800.0 2.0 False None None False None False 1600.0 0 3246214 112319 None code86 Punch with bit 8no& 10no Punch Holder with 8mm and 10mm bit Nos 1000.0 1000.0 1.0 False None None False None False 1000.0 0 3246215 112319 None code87 Spanner Set 8 spanners of the following sizes: 6 x 7 mm, 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 17 mm, 18 x 19 mm, 20 x 22 mm made of chromium steel coated with Nickel Chrome alloy Nos 558.0 558.0 1.0 False None None False None False 558.0 0 3246216 112319 None code88 Screw driver Kit Screwdriver kit of 8 blades with tester, flat tip: 3. 25, 4. 5, 5 Mm, philips no - 0, 1, 2, pocker and extension rod. Blade material made from manganese steel Nos 290.0 290.0 2.0 False None None False None False 580.0 0 3246217 112319 None code89 Mallet Hard non corrosive steel with wooden or Rubber grip on handle. Nos 210.0 210.0 2.0 False None None False None False 420.0 0 3246218 112319 None code90 Ball peen hammer Hard non corrosive steel with wooden or Rubber grip on handle. Nos 120.0 120.0 2.0 False None None False None False 240.0 0 3246219 112319 None code91 Claw hammer Hard non corrosive steel with wooden or Rubber grip on handle. Nos 200.0 200.0 2.0 False None None False None False 400.0 0 3246220 112319 None code92 Plier set of 4 4-piece pliers set includes 8-inch slip joint, 8-inch long nose, 8-inch lineman, and 7-inch diagonal/side cutting with insulated thick rubber covered handles. Nos 1000.0 1000.0 2.0 False None None False None False 2000.0 0 3246221 112319 None code93 Rheostat 0-10ohm 0 to 10 ohm Nos 4200.0 4200.0 1.0 False None None False None False 4200.0 0 3246222 112319 None code94 Rheostat 0-30ohm 0 to 30 ohm Nos 4850.0 4850.0 1.0 False None None False None False 4850.0 0 3246223 112319 None code95 Wire stripper Electrical insulation from electric wires. Nos 345.0 345.0 1.0 False None None False None False 345.0 0 3246224 112319 None code96 Poker screwdriver 95mm Poker Screwdriver Made out of High Grade Steel and Transparent green cellulose acetate handle Nos 25.0 25.0 4.0 False None None False None False 100.0 0 3246225 112319 None code97 Grease gun Grease Gun with Aluminum Die cast head complete with Universal Nozzle with Rubber Seal, tool box size grease gun with bulk fill capacity of upto 120 gms Die cast grease gun head 4" steel extension and 3 jaw coupler without ball check Nos 300.0 300.0 1.0 False None None False None False 300.0 0 3246226 112319 None code98 Oil cane Lever type 500 ml , high grade steel body with powder coated finish, steel pump , body. With 9" flexible PVC spout. Metal pump with 2 ball valves for large volume delivery per stroke Nos 100.0 100.0 1.0 False None None False None False 100.0 0 3246227 112319 None code99 Electrician knife Folding Knife for Cable Stripping and Cutting. 4.5" Insulated nylon handle 3 3/8" blade Nos 100.0 100.0 4.0 False None None False None False 400.0 0 3246228 112319 None code100 Adjustable wrench adjustable Wrench of 6 inches of high grade forging quality steel and heat treated in the range of 40 to 50 HRC Nos 217.0 217.0 2.0 False None None False None False 434.0 0 3246229 112319 None code101 Assorted wire Connectors Quantity: 80 pcs - Min 10 of each kind wof different sizes Red Connectors: 0.4mm to 1mm² / 22-16AWG Wire Blue Connector: 1.1mm to 2.6mm² / 16-14AWG Wire Yellow Connector: 2.5mm to 6.5mm² / 12-10AWG Wire 1. Twist-On Wire Connectors 2. Winged Twist-On Wire Connectors 3.Trimp-On Wire Connectors 4.nderground Wire Connectors 5.Waterproof Wire Connectors 6 Push-In Wire Connectors Nos 780.0 780.0 1.0 False None None False None False 780.0 0 3246230 112319 None code102 Wire Stripper, Cutter, Crimper and Pliers Multi crimp and stripper pliers Product Dimensions 8.2 x 2.6 x 0.6 inches with insulated Rubber grips Nos 208.0 208.0 2.0 False None None False None False 416.0 0 3246231 112319 None code103 Firmer chisel High-Quality Chrome Vanadium Steel Hardened to RC 58 with wooden/ rubberised handle and grip Nos 300.0 300.0 2.0 False None None False None False 600.0 0 3246232 112319 None code104 Files For filing the records measure 8 5/8 inches in height (for the front flap), 9 5/8 inches in height (for the back flap), and 11 3/4 inches in width Nos 650.0 650.0 1.0 False None None False None False 650.0 0 3246233 112319 None code105 Capacitor Used in Ceiling fans 450V AC 2uF 50/60Hz Polypropylene Film Motor Start Run Capacitor CBB61 Nos 100.0 100.0 1.0 False None None False None False 100.0 0 3246234 112319 None code106 Dimmer stat Resistance coil/induction coil Nos 2500.0 2500.0 1.0 False None None False None False 2500.0 0 3246235 112319 None code107 Stopwatch with Battery Digital Stopwatch with Battery. 12 hour display format Nos 300.0 300.0 1.0 False None None False None False 300.0 0 3246236 112319 None code108 Solder Wire Solder Wire (tin/lead) - 60/40 18 SWG Kg 150.0 150.0 1.0 False None None False None False 150.0 0 3246237 112319 None code109 Copper Wire Copper Wire for electrical fitting Kg 400.0 400.0 1.0 False None None False None False 400.0 0 3246238 112319 None code110 Aluminium wire Aluminium wire for electrical fitting Kg 175.0 175.0 1.0 False None None False None False 175.0 0 3246239 112319 None code111 Enamel aluminum wire Aluminum - (units in Kg) Polyesterimide overcoated with polyamide-imide enamelled Round Aluminium Wire, Class 200 IS 13730/ IEC 60317 Part 25 : 1993 6 swg to 37 swg Kg 230.0 230.0 1.0 False None None False None False 230.0 0 3246240 112319 None code112 Enamel copper wire Copper - (Units in Kg) Polyesterimide overcoated with IS 13730/ 8 swg to 43 swg polyamide-imide enamelled IEC 60317 4.06 mm to 0.091 mm Round Copper Wire, Class 200 Part 13 : 1993 Kg 500.0 500.0 1.0 False None None False None False 500.0 0 3246241 112319 None code113 Cello Tape 1 Inch 65mtrs Cello Tape Nos 50.0 50.0 4.0 False None None False None False 200.0 0 3246242 112319 None code114 PVC InsulationTape 0.125mmX18mm 10 Yards Self Adhesive PVC Electrical Insulation Tape-colored pack of 4 Sunlight Resistant, Pressure Sensitive Vinyl Electrical Tape Nos 150.0 150.0 4.0 False None None False None False 600.0 0 3246243 112319 None code115 Flexible Pipe Units in Mtrs Material :PVC Thickness: 1 - 5mm Feature :Self-extinguishing Length :2-10M Nominal pressure: 2 bar Mtr 40.0 40.0 10.0 False None None False None False 400.0 0 3246244 112319 None code116 Soldering iron Modular with rubber grip and holder - 1-Piece 30W Soldering Iron, 2 Soldering Tips and 1 Safety Stand Standard: IS 959 : 1994 ( Reaffirmed 2004 ) Nos 200.0 200.0 3.0 False None None False None False 600.0 0 3246245 112319 None code117 Modular Switches 16a 240v 2 Way Bell Switch -21, 10Amps 240V, 1 way switc- 3 with suitable plates Nos 500.0 500.0 5.0 False None None False None False 2500.0 0 3246246 112319 None code118 Modulare sockets Combined Box 2 Hole WH Switch, 20 Amp, White Nos 130.0 130.0 2.0 False None None False None False 260.0 0 3246247 112319 None code119 Wiring boards 5v/3.4 A PCB Board Nos 400.0 400.0 5.0 False None None False None False 2000.0 0 3246248 112319 None code120 Lead acid battery Battery Type :Sealed Type Voltage(volts) :100Ah 900A(EN)12V Adhering to BIS standards Nos 4000.0 4000.0 1.0 False None None False None False 4000.0 0 3246249 112319 None code121 MCB’s Miniature Circuit Breaker)blue,black,green. activated automatically: Standards: IEC60898 Nos 200.0 200.0 1.0 False None None False None False 200.0 0 3246250 112319 None code122 Power supply voltage switch Manual Switch block ithat selects one of its two inputs to pass through to the output. Nos 300.0 300.0 1.0 False None None False None False 300.0 0 3246251 112319 None code123 Desoldering pump & wire Manual / Electirc Vacuum Desoldering Pump Nos 200.0 200.0 1.0 False None None False None False 200.0 0 3246252 112319 None code124 Water Gauge Dial Size: 3 inch Accuracy : 2 % Case Bezel : SS 304 Wetted Parts : SS 304 ,SS 316,Brass Range : Vacuum to 2000 kg/cm2 Liquid filled : Glycerin Or Dry Nos 500.0 500.0 5.0 False None None False None False 2500.0 0 3246253 112319 None code125 Cables 10/14 copper wire 1mm x 2 core Mtr 60.0 60.0 25.0 False None None False None False 1500.0 0 3246254 112319 None code126 TDS Meter TDS Range 0 - 9990 ppm (mg/L) Power source 2 x 1.5V button cell batteries (included)(LR44 or equivalent) Battery life 1000 hours of usage Dimensions 15.5 x 3.1 x 2.3cm Weight with case 76.5g Temp. Range 0 - 80 degrees Celsius Resolution 0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon) Temperature Resolution 0.1 degree Celsius (Celsius only) Accuracy +/- 2% EC-to-TDS Conversion Factor NaCl (avg. 0.5) ATC Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius Nos 1300.0 1300.0 2.0 False None None False None False 2600.0 0 3246255 112319 None code127 Water Purifier Capacity : 0-5 L Certification : NSF, ISO Purifier Type : Electric Purification Capacity(Per Hour) : 10-15 liters/Hour Features : Auto Shut-Off, Smart Indicator Technology- RO+UV+UF+TDS, primary material - plastic , minimum input water Tempareture -10 dgree C, weight- 9.4kg, Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 3246256 112319 None code128 Micro wave oven grill, convention type Technical Specifications Microwave Frequency (MHZ)2450 Power Source (V-HZ)230-50 Microwave Power Consumption (Watts)1400 Grill Power Consumption (Watts)1000 Specifications Weight & Dimensions Net Weight (KG)Approx 14.5 Outer Dimension (H X W X D-mm)281 x 483 x 425 Turntable Diameter (mm)270 Aesthetics ColourBlack + Floral Design CavityPowder Coated DisplayLCD ( Cooking time/Power/Action indicators and time Displayed ) Features ClockYes Safety Overheating ProtectionYes Child Safety LockYes Performance Microwave Output (Watts)900 Nos 9000.0 9000.0 1.0 False None None False None False 9000.0 0 3246257 112319 None code129 Mixer-grinder 3 hardened stainless steel blades for multiple functions 1.5 Litre liquidizing jar, 1 Litre wet/dry grinding jar, 0.4 Litre chutney jar Warranty: 2 years on product Power: 500 watts; Operating voltage: 230 volts Includes: Mixer grinder, 3 Jars, 3 Blades, Nos 2500.0 2500.0 1.0 False None None False None False 2500.0 0 3246258 112319 None code130 Juicer Capacity : 100-500 ml No. Of Jar : 6 Speed Setting : 1 Power : 500 Watts Body Material : Plastic and Metal No. Of Attachement : 4 Nos 500.0 500.0 2.0 False None None False None False 1000.0 0 3246259 112319 None code131 Clamp Meter Display : 3 -1/2 digits A With 1999 Counts, Operating Temperature & Humidity : 0 deg C To 50 deg C , greater than 80% RH, Storage Temperature : -20 deg C To 60 deg C , greater than 80% RH Nos 500.0 500.0 2.0 False None None False None False 1000.0 0 3246260 112319 None code132 Pipe wrench Nominal Size of Pipe wrench (in mm)- 450, Jaw thickness of Pipe Wrench (in mm)- 21, Maximum capacity of Pipe wrench (in mm) - 65, Approximate length of handle (in mm)- 260, Approximate length of movable jaw(in mm)- 200, Material of Frame- Wrought Steel,Material for Spring - Steel Nos 600.0 600.0 2.0 False None None False None False 1200.0 0 3246261 112319 None code133 Soldering Flux Temperature range 50 deg C to 450 deg C, Temperature accuracy plus/minus 10 deg C, Temperature stability plus/minus 5 deg C, Out put voltage -12 V, Power consumption - 150 W to 300 W Nos 25.0 25.0 8.0 False None None False None False 200.0 0 3246262 112319 None code134 Hand glove Material : Polyurethane coating, Anti-static nylon/carbon yarn Nos 90.0 90.0 4.0 False None None False None False 360.0 0 3246263 112319 None code135 Single needle lock stitch machine (SNLS) with needle guard Application : Light to Medium Fabric Hook Mechanism : Standard Max Speed : 5500 SPM Max Stitch Length : 5 mm Max Presser Foot Lift(mm) : 5.5/13 mm Motor Type : Clutch Motor Wattage : 250 watt Nos 20000.0 20000.0 11.0 False None None False None False 220000.0 0 3246264 112319 None code136 Specialized industrial sewing machines Body Material : Mild Steel Voltage :220 V Button Size : 10-28 mm Button Holes Distance "2.5 to 6.5 mm Nos 30000.0 30000.0 5.0 False None None False None False 150000.0 0 3246265 112319 None code137 Sewing Machine Accessories and Attachments : 1 High quality bobbin case, 5 high quality aluminium bobbins, 1 pair of right & left single/zipper foot, 1 gathering foot, 1 box [10nos] sewing machine needle of size 14 and 1box [10nos] sewing machine needle of size 16. Kit 600.0 600.0 11.0 False None None False None False 6600.0 0 3246266 112319 None code138 Projector : Image System: TFT LCD, Brightness: 1200 lumens, Maximum Resolution: 1080p, Lamp: LED (20K hours) Projection Distance: 1.07M-3.8M, Projection Size: 34-130 inches, Color: 16.7M Power Supply: 100-240V 50/60HZ, Power Consumption: 55W (Max), Input: USB/SD/HDMI/AV/VGA/UNi-Link Output: 3.5mm earphone, Speaker: 8 Ohms1W, Short-focus Design: 2M-lessthan 70-inch,3M-lessthan100-inch Video: 3GP, AVI,MKV, FLV, MOV, MP4, MPG, VOB, RMVB, MPG Audio: MP3, WMA, ASF, OGG, AAC, WAV. Picture: JPEG, BMP, PNG. Text: TXT Nos 10000.0 10000.0 1.0 False None None False None False 10000.0 0 3246267 112319 None code139 Printer : LaserJet multifunction printer - Printer, Copier, Scanner Interpolated scanning resolution-19200 x 19200 dpi Optical scanning resolution-600 x 1200 dpi Compatible with operating system: Windows: XP/Vista/7/8, MAC, Linux With a USB port Nos 9000.0 9000.0 1.0 False None None False None False 9000.0 0 3246268 112319 None code140 Shears (8-10” Iron Blade for Cutting Fabric) : Tailoring scissors of minimum 9.5inch made up of stainless steel for cutting a fabric. Nos 500.0 500.0 15.0 False None None False None False 7500.0 0 3246269 112319 None code141 Paper, Scissors : Plastic handled stainless steel scissor for cutting paper Nos 150.0 150.0 15.0 False None None False None False 2250.0 0 3246270 112319 None code142 Seam Ripper : Handy seam ripper with plastic cover, used for opening stitches for sewing and craft works, Length : Large Size(LxW):30 x 5 mm, Small Size(LxW): 60 x 5 mm, Handle Length (in mm) : 35, 98 Nos 100.0 100.0 15.0 False None None False None False 1500.0 0 3246271 112319 None code143 Tracing wheel : Tracing wheel with minimum length:- 15.2cm, and wheel gear diameter:- 2.2cm. Each 50.0 50.0 15.0 False None None False None False 750.0 0 3246272 112319 None code144 Tailor's Chalk : Extra smooth tailoring, sewing markers with fashion designing triangle scales, set of 15 dust free tailoring chalks Each 150.0 150.0 11.0 False None None False None False 1650.0 0 3246273 112319 None code145 Craft Cutter : Metal craft cutters/nippers with plastic handle for multi use cutting threads,paper,crafts Each 75.0 75.0 15.0 False None None False None False 1125.0 0 3246274 112319 None code146 Safety Pins : Steel safety pins of medium (3.5cm) and large sizes (5.5cm) Box 50.0 50.0 11.0 False None None False None False 550.0 0 3246275 112319 None code147 Dress Maker's Pin : All pins with pointed needle with length 2.5 cm X diameter 0.5 mm Box 150.0 150.0 11.0 False None None False None False 1650.0 0 3246276 112319 None code148 Scale : Metallic scale of sizes 6” & 12” Nos 200.0 200.0 11.0 False None None False None False 2200.0 0 3246277 112319 None code149 Measuring Tape : PVC measuring tape of 7.5 m and 0.5” width Nos 200.0 200.0 11.0 False None None False None False 2200.0 0 3246278 112319 None code150 Bobbin and bobbin case for industrial machine : Steel bobbin and bobbin case, Material: Stainless Steel, Dimension(lxbkxh) in cm: 4x3.5x1.3 Nos 100.0 100.0 30.0 False None None False None False 3000.0 0 3246279 112319 None code151 Hand needles : Assorted hand sewing needles for embroidery and mending, Standard size, Material : Stainless Steel, Finish : Polished, Rust Proof, Dimension(lxb) in cm: 5x0.26 Nos 200.0 200.0 30.0 False None None False None False 6000.0 0 3246280 112319 None code152 Machine needles : Sewing machine needle with one pack containing minimum 20 needle, Standard size, Size: 9, 11, 14, 16, 18; Nos 150.0 150.0 30.0 False None None False None False 4500.0 0 3246281 112319 None code153 Needle Threader : Steel needle threader, Size: approx. 6.7 x 2.2 x 0.6 cm Nos 20.0 20.0 30.0 False None None False None False 600.0 0 3246282 112319 None code154 Notcher (1/4 X 1/6” Opening) : Metal notcher with spring action handle like paper punch to mark notches on pattern paper or tissue pieces. Creates deep square cuts in the edge of patterns. Minimum dimensions : 19 x 8.5 cm Nos 300.0 300.0 11.0 False None None False None False 3300.0 0 3246283 112319 None code155 Dress Form (Various Sizes of Male / Female / Kids) : Sample cotton salwar, shirt and frock models 2xDress Form Women's-Large and Medium 2xDress Form Men's-Large and Medium 2xDress Form Kids (2-3 Years) 2xDress Form Girls (12-14 Years) 2xDress Form Boys (12-13 Years) Kit 10000.0 10000.0 1.0 False None None False None False 10000.0 0 3246284 112319 None code156 Threads : 180 mts polyester thread used in hand & machine work (set of 100) Set 600.0 600.0 3.0 False None None False None False 1800.0 0 3246285 112319 None code157 Personal protective equipment (Nose Mask, Goggles, etc.): Respiratory anti-pollution non-woven mask. Goggles hard coated, scratch resistance, UV protected safety glasses Nos 150.0 150.0 11.0 False None None False None False 1650.0 0 3246286 112319 None code158 Cutting Table : Pre-laminated folding type board of measurement- 8'(L)x 6' (W) x 3'(H) Nos 15000.0 15000.0 1.0 False None None False None False 15000.0 0 3246287 112319 None code159 Students Sewing stools : Sewing machine table made up of stainless steel. Nos 1000.0 1000.0 11.0 False None None False None False 11000.0 0 3246288 112319 None code160 First aid box : Large household multi-layer first aid kit multifunctional medicine box comprising of first-aid bandage, small scissors, tweezers or a cotton swab, ointment, and other basic over the counter drugs. Nos 1000.0 1000.0 1.0 False None None False None False 1000.0 0 3246289 112319 None code161 Dustbin : Stainless steel plain pedal dustbin-1 Big plastic garbage bin- 1 Nos 500.0 500.0 2.0 False None None False None False 1000.0 0 3246290 112319 None code162 Pouches for Storing Items : Clear transparent zip lock bags with write on panels - Large, medium and small size- 200x300mm, 250x350mm, 300x400mm (For storing threads, garments, needles etc) Nos 300.0 300.0 11.0 False None None False None False 3300.0 0 3246291 112319 None code163 White Board and accessories : Dry erasable white board (4'x6'), along with white board marker, and magnetic white board eraser Nos 5000.0 5000.0 1.0 False None None False None False 5000.0 0 3246292 112319 None code164 Machine Oil : 200ml bottle of sewing machine lubricant oil. Nos 70.0 70.0 15.0 False None None False None False 1050.0 0 3246293 112319 None code165 Stationary : Pencil (HB) Files and Folders Carbon Paper ( Various Colors) Labels and Stickers Nos 50.0 50.0 30.0 False None None False None False 1500.0 0 3246294 112319 None code166 Documents/Charts : Tech Pack/ Specification Sheet Size Chart Trim Card Seam samples of different fabric Buyer’s comment Sheet Operation Bulletin Company Quality Standards Handbook/ Guidelines Fabric Worksheet Style Confirmation sheet Fabric consumption Chart Fabric Requirement sheet (FRS) Trims Requirement sheet Nos 100.0 100.0 15.0 False None None False None False 1500.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1717758652000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1717758652000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1717758652000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Valid PWD Registration certificate True Technical Bid Annual turnover certificate with valid UDIN No for last 5 years i.e., from 2019-20 to 2023-24 obtained from the Chartered Accountant and supported by the income tax returns filed by the bidder with IT departments. True Technical Bid To qualify for award of this contract, each tenderer in his name should have in the last five years period i.e. 2019-20 2020-21 2021-22 2022-23 2023-24 achieved in at least two financial years on average annual financial turnover of 100 percent of cost of the work. True Technical Bid Work done certificate for Satisfactorily completed as prime contractor, at least one similar nature of work value not less than 50 percent from Competent Authority not below the rank of Executive Engineer or equivalent And also list of such works in FORMAT-2 True Technical Bid Existing commitments and ongoing works which are yet to be completed True Technical Bid The works for which tender acceptance letters are received are to be furnished. True Technical Bid The information of the works for which tenderer has already submitted tender are to be furnished. True Technical Bid The information on litigation in which the Tenderer is involved are to be furnished. True Technical Bid Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer are not furnished. True Technical Bid Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None