createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1717154059744 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4780.00 emd 341000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 21-06-2024 16:30:00 tenderQueryClose 18-06-2024 16:30:00 technicalBidOpen 24-06-2024 11:00:00 publishedDate 10-06-2024 13:26:44 publishedByPost RDPR_EE_DIV_RCR publishedByUser KPE14312 - VENKATESH GALAG bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 06-06-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Md. Faiz Alam splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9972094236 tenderSupplierList None
tenderSchedule	createdTs 1717154059783 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT5102 title Construction of New School room, Compound wall and Toilet to Govt Higher Primary School Building at Chintalakunta Village in Deodurga Taluka of Raichur DIstrict. Under KKRDB for the year 2023-24 description Construction of New School room, Compound wall and Toilet to Govt Higher Primary School Building at Chintalakunta Village in Deodurga Taluka of Raichur DIstrict. Under KKRDB for the year 2023-24 category WORKS categoryText Works ecv 19094927.54 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 963 locationName RDPR Division Office Raichur provisionalAmount 22707000.0 groupOverheadTotal None fileNumber EE/PRED/J-2/KKRDB/MICRO/2023-24/CHINTALAKUNTA/SEODURGA
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1717154060000 0 None None Buildings For School Building Ground Floor 10231288.21 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211737 110614 None 001 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (PWD CSR VOL I for the year 2023-24. I. No. 1.12 P.No. 08) Cum 99.75 99.75 120.0 False None None False None False 11970.0 0 3211738 110614 None 002 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD CSR VOL I for the year 2023-24. I. No. 1.14.1 P.No. 08 ) Cum 107.1 107.1 799.13 False None None False None False 85586.823 0 3211739 110614 None 003 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m (PWD CSR VOL I for the year 2023-24. I. No. 1.4.1 P.No. 05) Cum 254.1 254.1 113.99 False None None False None False 28964.859 0 3211740 110614 None 004 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. (PWD CSR VOL I for the year 2023-24. I. No. 1.23 P.No. 11) Cum 2816.1 2816.1 99.89 False None None False None False 281300.229 0 3211741 110614 None 005 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.1.4 P.No. 15) Cum 6527.85 6527.85 1.59 False None None False None False 10379.2815 0 3211742 110614 None 006 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 3916.71 3916.71 1.59 False None None False None False 6227.5689 0 3211743 110614 None 007 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD CSR VOL I for the year 2023-24. I. No. 2.1.3 P.No. 15) Cum 6288.45 6288.45 49.95 False None None False None False 314108.0775 0 3211744 110614 None 008 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD CSR VOL I for the year 2023-24. I. No. 2.1.3 P.No. 15) FLOORING BED CONCRETE Cum 6288.45 6288.45 46.54 False None None False None False 292664.463 0 3211745 110614 None 009 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD CSR VOL I for the year 2023-24. I. No. 2.1.3 P.No. 15) PCC BELOW GRADE BEAM Cum 6288.45 6288.45 5.33 False None None False None False 33517.4385 0 3211746 110614 None 010 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD CSR VOL I for the year 2023-24. I. No. 2.1.3 P.No. 15) Flagging Concrete Cum 6288.45 6288.45 13.19 False None None False None False 82944.6555 0 3211747 110614 None 011 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (PWD CSR VOL I for the year 2023-24. I. No. 1.8 P.No. 7) Cum 472.82 472.82 1042.91 False None None False None False 493108.7062 0 3211748 110614 None 012 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) Cum 6652.8 6652.8 88.56 False None None False None False 589171.968 0 3211749 110614 None 013 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Stepped footings 3%. (PWD CSR VOL I for the year 2023-24. Sl. No. 1(b) P.No. 111) Cum 199.58 199.58 88.56 False None None False None False 17674.8048 0 3211750 110614 None 014 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) Cum 6652.8 6652.8 11.43 False None None False None False 76041.504 0 3211751 110614 None 015 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for isolated footings 8%. (PWD CSR VOL I for the year 2023-24. Sl. No. 1(a) P.No. 111) Cum 532.22 532.22 11.43 False None None False None False 6083.2746 0 3211752 110614 None 016 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) Cum 6652.8 6652.8 5.66 False None None False None False 37654.848 0 3211753 110614 None 017 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111) Cum 4656.96 4656.96 5.66 False None None False None False 26358.3936 0 3211754 110614 None 018 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) GRADE BEAM & PLINTH BEAM Cum 6652.8 6652.8 36.5 False None None False None False 242827.2 0 3211755 110614 None 019 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings 50%. (PWD CSR VOL I for the year 2023-24. Sl. No. 2 P.No. 111) Cum 3326.4 3326.4 36.5 False None None False None False 121413.6 0 3211756 110614 None 020 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16)RCC WORKS FOR SUPERSTRUCTURE Cum 7185.15 7185.15 19.42 False None None False None False 139535.613 0 3211757 110614 None 021 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111) Cum 5029.61 5029.61 19.42 False None None False None False 97675.0262 0 3211758 110614 None 022 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) LINTEL BEAM Cum 7185.15 7185.15 6.91 False None None False None False 49649.3865 0 3211759 110614 None 023 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 4311.09 4311.09 6.91 False None None False None False 29789.6319 0 3211760 110614 None 024 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) STAIRCASE Cum 7185.15 7185.15 3.9 False None None False None False 28022.085 0 3211761 110614 None 025 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Staircase and other similar structures 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 16 P.No. 112) Cum 3592.58 3592.58 3.9 False None None False None False 14011.062 0 3211762 110614 None 026 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) ROOF BEAM Cum 7185.15 7185.15 19.34 False None None False None False 138960.801 0 3211763 110614 None 027 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 4311.09 4311.09 19.34 False None None False None False 83376.4806 0 3211764 110614 None 028 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) ROOF SLAB Cum 7185.15 7185.15 75.53 False None None False None False 542694.3795 0 3211765 110614 None 029 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 15 P.No. 112) Cum 3592.58 3592.58 75.53 False None None False None False 271347.5674 0 3211766 110614 None 030 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) CHAJJA Cum 7185.15 7185.15 1.73 False None None False None False 12430.3095 0 3211767 110614 None 031 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections 45% (PWD CSR VOL I for the year 2023-24. Sl. No. 19 P.No. 112) Cum 3233.32 3233.32 1.73 False None None False None False 5593.6436 0 3211768 110614 None 032 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 6.32 P.No. 17) Sqm 1375.5 1375.5 92.03 False None None False None False 126587.265 0 3211769 110614 None 033 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 6.32 P.No. 17) Sqm 1375.5 1375.5 452.2 False None None False None False 622001.1 0 3211770 110614 None 034 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.34 P.No. 17) PARTITION WALL Sqm 1159.2 1159.2 47.95 False None None False None False 55583.64 0 3211771 110614 None 035 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.16 P.No. 15) Sqm 99.75 99.75 47.95 False None None False None False 4783.0125 0 3211772 110614 None 036 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 8.1.2 P.No. 41) INSIDE PLASTERING Sqm 253.05 253.05 816.28 False None None False None False 206559.654 0 3211773 110614 None 037 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.2.2 P.No. 41) OUTSIDE PLASTERING :- Sqm 292.95 292.95 724.96 False None None False None False 212377.032 0 3211774 110614 None 038 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.2.2 P.No. 41) ROUGH PLASTERING :- Sqm 292.95 292.95 170.64 False None None False None False 49988.988 0 3211775 110614 None 039 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.51 P.No. 50) WALL PUTTY Sqm 105.0 105.0 1283.15 False None None False None False 134730.75 0 3211776 110614 None 040 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.13.1 P.No. 100) Cum 103755.75 103755.75 1.06 False None None False None False 109981.095 0 3211777 110614 None 041 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.54 P.No. 104) Sqm 333.9 333.9 22.8 False None None False None False 7612.92 0 3211778 110614 None 042 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per specification. 35 mm thick both side commercial (PWD CSR VOL I for the year 2023-24. I. No. 12.57.6 P.No. 105) Sqm 3488.1 3488.1 29.59 False None None False None False 103212.879 0 3211779 110614 None 043 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.60 P.No. 105) Nos 1104.6 1104.6 26.0 False None None False None False 28719.6 0 3211780 110614 None 044 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.74.1 P.No. 107) Nos 107.1 107.1 72.0 False None None False None False 7711.2 0 3211781 110614 None 045 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.58 P.No. 105) Nos 126.0 126.0 26.0 False None None False None False 3276.0 0 3211782 110614 None 046 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.62 P.No. 105) Nos 248.85 248.85 26.0 False None None False None False 6470.1 0 3211783 110614 None 047 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.63 P.No. 105) Nos 136.5 136.5 26.0 False None None False None False 3549.0 0 3211784 110614 None 048 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam (PWD CSR VOL I for the year 2023-24. I. No. 12.55.1 P.No. 104) Sqm 2484.3 2484.3 6.3 False None None False None False 15651.09 0 3211785 110614 None 049 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.90 P.No. 110) Sqm 7070.7 7070.7 43.2 False None None False None False 305454.24 0 3211786 110614 None 050 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.85 P.No. 109) Sqm 6004.95 6004.95 1.62 False None None False None False 9728.019 0 3211787 110614 None 051 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.51 P.No. 104) Nos 1055.0 1055.0 13.0 False None None False None False 13715.0 0 3211788 110614 None 052 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.34B P.No. 86) Kg 192.15 192.15 941.22 False None None False None False 180855.423 0 3211789 110614 None 053 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.3 P.No. 77) Sqm 8689.8 8689.8 8.38 False None None False None False 72820.524 0 3211790 110614 None 054 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.6.1 P.No. 78) Sqm 2764.65 2764.65 6.3 False None None False None False 17417.295 0 3211791 110614 None 055 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.17.2 P.No. 61) VITRIFIED GLAZED FLOORING Sqm 1233.75 1233.75 336.13 False None None False None False 414700.3875 0 3211792 110614 None 056 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.17.2 P.No. 61) VITRIFIED GLAZED SKRITING Sqm 1233.75 1233.75 22.3 False None None False None False 27512.625 0 3211793 110614 None 057 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.32 P.No. 64) Sqm 2711.1 2711.1 117.25 False None None False None False 317876.475 0 3211794 110614 None 058 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.32 P.No. 64) Sqm 2711.1 2711.1 44.83 False None None False None False 121538.613 0 3211795 110614 None 059 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 10.2 P.No. 69) m 344.4 344.4 88.86 False None None False None False 30603.384 0 3211796 110614 None 060 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.11 P.No. 60) TILES FOR TOILET Sqm 933.45 933.45 25.05 False None None False None False 23382.9225 0 3211797 110614 None 061 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.39 P.No. 65) COLOUR GLAZED TILES FOR CLADING Sqm 1521.45 1521.45 43.47 False None None False None False 66137.4315 0 3211798 110614 None 062 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.3 P.No. 47) Sqm 145.95 145.95 70.17 False None None False None False 10241.3115 0 3211799 110614 None 063 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) Sqm 165.9 165.9 816.28 False None None False None False 135420.852 0 3211800 110614 None 064 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.28 P.No. 85) Kg 593.25 593.25 124.3 False None None False None False 73740.975 0 3211801 110614 None 065 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) Sqm 165.9 165.9 466.87 False None None False None False 77453.733 0 3211802 110614 None 066 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.30 P.No. 46) Sqm 182.7 182.7 724.96 False None None False None False 132450.192 0 3211803 110614 None 067 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.84 P.No. 55) Sqm 498.75 498.75 7.2 False None None False None False 3591.0 0 3211804 110614 None 068 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.49 P.No. 49) cm 4.2 4.2 1500.0 False None None False None False 6300.0 0 3211805 110614 None 069 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (PWD CSR VOL I for the year 2023-24. I. No. 1.8 P.No. 7) Cum 497.7 497.7 165.0 False None None False None False 82120.5 0 3211806 110614 None 070 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a.Buildings (PWD CSR VOL I for the year 2023-24. I. No. 2.11.a P.No. 18) Tonne 93929.85 93929.85 23.83 False None None False None False 2238348.3255 0 1717154060000 0 None None Buildings For School Building First Floor 4508199.05 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211807 110615 None 001 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.1.4 P.No. 15) Cum 6593.13 6593.13 1.46 False None None False None False 9625.9698 0 3211808 110615 None 002 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 3955.88 3955.88 1.46 False None None False None False 5775.5848 0 3211809 110615 None 003 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) LINTEL BEAM Cum 7257.0 7257.0 4.8 False None None False None False 34833.6 0 3211810 110615 None 004 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 4354.2 4354.2 4.8 False None None False None False 20900.16 0 3211811 110615 None 005 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) STAIRCASE Cum 7257.0 7257.0 3.9 False None None False None False 28302.3 0 3211812 110615 None 006 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Staircase and other similar structures 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 16 P.No. 112) Cum 3628.5 3628.5 3.9 False None None False None False 14151.15 0 3211813 110615 None 007 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) COLUMN Cum 7257.0 7257.0 9.84 False None None False None False 71408.88 0 3211814 110615 None 008 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111) Cum 5079.9 5079.9 9.84 False None None False None False 49986.216 0 3211815 110615 None 009 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) ROOF BEAM Cum 7257.0 7257.0 12.39 False None None False None False 89914.23 0 3211816 110615 None 010 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 4354.2 4354.2 12.39 False None None False None False 53948.538 0 3211817 110615 None 011 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) ROOF SLAB Cum 7257.0 7257.0 50.34 False None None False None False 365317.38 0 3211818 110615 None 012 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 15 P.No. 112) Cum 3628.5 3628.5 50.34 False None None False None False 182658.69 0 3211819 110615 None 013 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) CHAJJA Cum 7257.0 7257.0 1.16 False None None False None False 8418.12 0 3211820 110615 None 014 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections 45% (PWD CSR VOL I for the year 2023-24. Sl. No. 19 P.No. 112) Cum 3265.65 3265.65 1.16 False None None False None False 3788.154 0 3211821 110615 None 015 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 6.32 P.No. 17) Sqm 1389.26 1389.26 343.2 False None None False None False 476794.032 0 3211822 110615 None 016 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.34 P.No. 17) Sqm 1170.79 1170.79 74.34 False None None False None False 87036.5286 0 3211823 110615 None 017 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.16 P.No. 15) Sqm 100.75 100.75 74.34 False None None False None False 7489.755 0 3211824 110615 None 018 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 8.1.2 P.No. 41) Sqm 255.58 255.58 554.29 False None None False None False 141665.4382 0 3211825 110615 None 019 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.2.2 P.No. 41) Sqm 295.88 295.88 542.38 False None None False None False 160479.3944 0 3211826 110615 None 020 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.2.2 P.No. 41) Sqm 295.88 295.88 36.7 False None None False None False 10858.796 0 3211827 110615 None 021 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.51 P.No. 50) Sqm 106.05 106.05 870.47 False None None False None False 92313.3435 0 3211828 110615 None 022 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.13.1 P.No. 100) Cum 104793.31 104793.31 0.74 False None None False None False 77547.0494 0 3211829 110615 None 023 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.54 P.No. 104) Sqm 337.24 337.24 17.1 False None None False None False 5766.804 0 3211830 110615 None 024 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per specification. 35 mm thick both side commercial (PWD CSR VOL I for the year 2023-24. I. No. 12.57.6 P.No. 105) Sqm 3522.98 3522.98 21.36 False None None False None False 75250.8528 0 3211831 110615 None 025 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.60 P.No. 105) Nos 1115.65 1115.65 18.0 False None None False None False 20081.7 0 3211832 110615 None 026 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.74.1 P.No. 107) Nos / Mtr 108.17 108.17 54.0 False None None False None False 5841.18 0 3211833 110615 None 027 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.58 P.No. 105) Nos / Mtr 127.26 127.26 18.0 False None None False None False 2290.68 0 3211834 110615 None 028 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.62 P.No. 105) Nos / Mtr 251.34 251.34 18.0 False None None False None False 4524.12 0 3211835 110615 None 029 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.63 P.No. 105) Nos / Mtr 137.87 137.87 18.0 False None None False None False 2481.66 0 3211836 110615 None 030 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam (PWD CSR VOL I for the year 2023-24. I. No. 12.55.1 P.No. 104) Sqm 2509.14 2509.14 4.73 False None None False None False 11868.2322 0 3211837 110615 None 031 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.90 P.No. 110) Sqm 7141.41 7141.41 30.96 False None None False None False 221098.0536 0 3211838 110615 None 032 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.85 P.No. 109) Sqm 6065.0 6065.0 1.35 False None None False None False 8187.75 0 3211839 110615 None 033 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.51 P.No. 104) Nos / Mtr 1077.47 1077.47 9.0 False None None False None False 9697.23 0 3211840 110615 None 034 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.34B P.No. 86) Kg 194.07 194.07 678.51 False None None False None False 131678.4357 0 3211841 110615 None 035 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.17.2 P.No. 61) VITRIFIED GLAZED FLOORING Sqm 1246.09 1246.09 197.68 False None None False None False 246327.0712 0 3211842 110615 None 036 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.17.2 P.No. 61) VITRIFIED GLAZED SKRITING Sqm 1246.09 1246.09 10.56 False None None False None False 13158.7104 0 3211843 110615 None 037 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.32 P.No. 64) Sqm 2738.21 2738.21 102.95 False None None False None False 281898.7195 0 3211844 110615 None 038 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.32 P.No. 64) Sqm 2738.21 2738.21 25.15 False None None False None False 68865.9815 0 3211845 110615 None 039 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 10.2 P.No. 69) HALF NOSING m 347.84 347.84 39.6 False None None False None False 13774.464 0 3211846 110615 None 040 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.11 P.No. 60) Sqm 942.78 942.78 21.74 False None None False None False 20496.0372 0 3211847 110615 None 041 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 9.39 P.No. 65) Sqm 1536.66 1536.66 36.7 False None None False None False 56395.422 0 3211848 110615 None 042 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.3 P.No. 47) PAINTING TO STEEL Sqm 147.41 147.41 32.31 False None None False None False 4762.8171 0 3211849 110615 None 043 PAINTING FOR INSIDE WALL Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) Sqm 167.56 167.56 554.29 False None None False None False 92876.8324 0 3211850 110615 None 044 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.28 P.No. 85) STAINLESS STEEL RAILING Kg 599.18 599.18 88.01 False None None False None False 52733.8318 0 3211851 110615 None 045 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) CEILING PAINTING Sqm 167.56 167.56 315.36 False None None False None False 52841.7216 0 3211852 110615 None 046 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.30 P.No. 46) EXTERIOR PAINTING Sqm 184.53 184.53 542.38 False None None False None False 100085.3814 0 3211853 110615 None 047 Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.84 P.No. 55) Sqm 503.74 503.74 10.8 False None None False None False 5440.392 0 3211854 110615 None 048 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a.Buildings (PWD CSR VOL I for the year 2023-24. I. No. 2.11.a P.No. 18) Tonne 94869.15 94869.15 10.61 False None None False None False 1006561.6815 0 1717154060000 0 None None Buildings For Building Head Room 759904.66 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211855 110616 None 001 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.1.4 P.No. 15) REINFORCED CEMENT CONCRETE Cum 6658.41 6658.41 1.32 False None None False None False 8789.1012 0 3211856 110616 None 002 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111) Cum 4660.88 4660.88 1.32 False None None False None False 6152.3616 0 3211857 110616 None 003 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.1.4 P.No. 15) PLAIN CEMENT CONCRETE M10 Cum 6658.41 6658.41 2.94 False None None False None False 19575.7254 0 3211858 110616 None 004 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111) Cum 4660.88 4660.88 2.94 False None None False None False 13702.9872 0 3211859 110616 None 005 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) LINTEL BEAM Cum 7328.85 7328.85 0.67 False None None False None False 4910.3295 0 3211860 110616 None 006 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 4397.31 4397.31 0.67 False None None False None False 2946.1977 0 3211861 110616 None 007 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 6.32 P.No. 17) MASONRY WORKS Sqm 7227.11 7227.11 45.01 False None None False None False 325292.2211 0 3211862 110616 None 008 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.34 P.No. 17) Sqm 1182.38 1182.38 92.58 False None None False None False 109464.7404 0 3211863 110616 None 009 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.16 P.No. 15) Sqm 101.75 101.75 92.58 False None None False None False 9420.015 0 3211864 110616 None 010 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2021-22. I. No. 2.1.4 P.No. 15) COPING 1:3:6 CONCRETE Cum 6346.75 6346.75 0.75 False None None False None False 4760.0625 0 3211865 110616 None 011 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 3808.05 3808.05 0.75 False None None False None False 2856.0375 0 3211866 110616 None 012 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD CSR for Buildings VOL II for the year 2023-24. I. No. 8.1.2 P.No. 41) PLASTERING INSIDE Sqm 258.11 258.11 45.95 False None None False None False 11860.1545 0 3211867 110616 None 013 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.2.2 P.No. 41) Sqm 298.81 298.81 252.21 False None None False None False 75362.8701 0 3211868 110616 None 014 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.51 P.No. 50) Sqm 107.1 107.1 45.95 False None None False None False 4921.245 0 3211869 110616 None 015 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of theEngineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.5.2 P.No. 77) Sqm 4543.18 4543.18 1.89 False None None False None False 8586.6102 0 3211870 110616 None 016 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.1 P.No. 46) Sqm 169.22 169.22 45.95 False None None False None False 7775.659 0 3211871 110616 None 017 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.30 P.No. 46) Sqm 186.35 186.35 252.21 False None None False None False 46999.3335 0 3211872 110616 None 018 Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers, over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 7.19 P.No. 23) Sqm 400.55 400.55 30.62 False None None False None False 12264.841 0 3211873 110616 None 019 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.25.2 P.No. 84) Kgs 145.66 145.66 335.13 False None None False None False 48815.0358 0 3211874 110616 None 020 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a.Buildings (PWD CSR VOL I for the year 2023-24. I. No. 2.11.a P.No. 18) Tonne 95808.45 95808.45 0.37 False None None False None False 35449.1265 0 1717154060000 0 None None Buildings For Water Supply and Sanitary 726284.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211875 110617 None 001 Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components Each 26250.0 26250.0 1.0 False None None False None False 26250.0 0 3211876 110617 None 002 Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 3211877 110617 None 003 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 40MM Dia Pipe over terrace distribution from Tank Mtr 500.85 500.85 85.0 False None None False None False 42572.25 0 3211878 110617 None 004 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 32mm dia Pipe from Terrace Floor to Toilet Rooms Mtr 390.6 390.6 85.0 False None None False None False 33201.0 0 3211879 110617 None 005 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 25mm dia Pipe from Toilet Rooms to Bath,W/C,urinals & Washbasins Mtr 500.85 500.85 85.0 False None None False None False 42572.25 0 3211880 110617 None 006 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 20mm dia Pipe from Toilet Rooms to Bath,W/C,urinals & Washbasins Mtr 397.95 397.95 85.0 False None None False None False 33825.75 0 3211881 110617 None 007 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Each 300.3 300.3 12.0 False None None False None False 3603.6 0 3211882 110617 None 008 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore 40mm nominal dia near tank outlet Each 320.25 320.25 10.0 False None None False None False 3202.5 0 3211883 110617 None 009 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15mm C.P. brass pillar tap Unit 2689.05 2689.05 10.0 False None None False None False 26890.5 0 3211884 110617 None 010 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore Set 115.5 115.5 10.0 False None None False None False 1155.0 0 3211885 110617 None 011 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Each 2976.75 2976.75 8.0 False None None False None False 23814.0 0 3211886 110617 None 012 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 49.35 49.35 8.0 False None None False None False 394.8 0 3211887 110617 None 013 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 2928.45 2928.45 27.36 False None None False None False 80122.392 0 3211888 110617 None 014 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 6.0 False None None False None False 30769.2 0 3211889 110617 None 015 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete No 231.0 231.0 20.0 False None None False None False 4620.0 0 3211890 110617 None 016 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth Cum 381.15 381.15 105.12 False None None False None False 40066.488 0 3211891 110617 None 017 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With No 5924.1 5924.1 8.0 False None None False None False 47392.8 0 3211892 110617 None 018 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 150mm nominal dia pipes Mtr 806.4 806.4 40.0 False None None False None False 32256.0 0 3211893 110617 None 019 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes Mtr 404.25 404.25 60.0 False None None False None False 24255.0 0 3211894 110617 None 020 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 305.55 305.55 80.0 False None None False None False 24444.0 0 3211895 110617 None 021 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6288.45 6288.45 2.0 False None None False None False 12576.9 0 3211896 110617 None 022 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.LW-(4.46x0.23x2.6)x1 Sqm 1375.5 1375.5 23.19 False None None False None False 31897.845 0 3211897 110617 None 023 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.SW-(3.00x0.23x2.6)x1 Sqm 1375.5 1375.5 15.6 False None None False None False 21457.8 0 3211898 110617 None 024 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1159.2 1159.2 5.4 False None None False None False 6259.68 0 3211899 110617 None 025 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 1.52 False None None False None False 10921.428 0 3211900 110617 None 026 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% Cum 3592.58 3592.58 15.15 False None None False None False 54427.587 0 3211901 110617 None 027 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Size - (2x3.00x2.60)x1 Cum 349.65 349.65 15.6 False None None False None False 5454.54 0 3211902 110617 None 028 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Size - (2x4.00x2.60)x1 Sqm 349.65 349.65 20.8 False None None False None False 7272.72 0 3211903 110617 None 029 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 2060.1 2060.1 1.0 False None None False None False 2060.1 0 3211904 110617 None 030 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.1 False None None False None False 9392.985 0 3211905 110617 None 031 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes 110mm dia outlet from toilet rooms to inspection chambers, etc Mtr 404.25 404.25 60.0 False None None False None False 24255.0 0 1717154060000 0 None None Buildings For Electrification Work 735867.65 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211906 110618 None 001 Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary Mtr 69.3 69.3 800.0 False None None False None False 55440.0 0 3211907 110618 None 002 Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 300.0 False None None False None False 21420.0 0 3211908 110618 None 003 Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase&Neutral) &1x1.0sqmm(Earthwire) FRLSmultistrand PVC insulated copperwire (confirming to IS-694:and latest amendments) without control switch shall be fixed on the existing plastic sheet/gangbox, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 282.45 282.45 33.0 False None None False None False 9320.85 0 3211909 110618 None 004 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 397.95 397.95 43.0 False None None False None False 17111.85 0 3211910 110618 None 005 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 582.75 582.75 29.0 False None None False None False 16899.75 0 3211911 110618 None 006 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 1.5sqmm. Mtr 27.02 27.02 4000.0 False None None False None False 108080.0 0 3211912 110618 None 007 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 2.5sqmm. Mtr 44.1 44.1 4000.0 False None None False None False 176400.0 0 3211913 110618 None 008 Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board.6A Batten Holder No 77.7 77.7 100.0 False None None False None False 7770.0 0 3211914 110618 None 009 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 2 Way Each 134.4 134.4 170.0 False None None False None False 22848.0 0 3211915 110618 None 010 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped fan regulator. Two Module Each 374.85 374.85 35.0 False None None False None False 13119.75 0 3211916 110618 None 011 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped fan regulator. 16Amps one way switch. Each 189.0 189.0 170.0 False None None False None False 32130.0 0 3211917 110618 None 012 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . 4-5Way Each 185.85 185.85 80.0 False None None False None False 14868.0 0 3211918 110618 None 013 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . 8Way Each 274.05 274.05 40.0 False None None False None False 10962.0 0 3211919 110618 None 014 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4 Module Each 183.75 183.75 80.0 False None None False None False 14700.0 0 3211920 110618 None 015 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 8 Module Each 298.2 298.2 40.0 False None None False None False 11928.0 0 3211921 110618 None 016 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. Each 282.45 282.45 160.0 False None None False None False 45192.0 0 3211922 110618 None 017 Supplying and fixing/replacing of fluorescent tube. 18 to 40W Each 99.75 99.75 160.0 False None None False None False 15960.0 0 3211923 110618 None 018 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model Each 3133.2 3133.2 35.0 False None None False None False 109662.0 0 3211924 110618 None 019 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. Ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 35.0 False None None False None False 6284.25 0 3211925 110618 None 020 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 435.75 435.75 24.0 False None None False None False 10458.0 0 3211926 110618 None 021 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP Each 775.95 775.95 16.0 False None None False None False 12415.2 0 3211927 110618 None 022 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. Each 1449.0 1449.0 2.0 False None None False None False 2898.0 0 1717154060000 0 None None Buildings For Drilling of Borewell 93630.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211928 110619 None 001 Geophysical investigation at site for sinking borewells for providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. (WS & Sewerage Works Vol V CSR for the 2023-24 Sl No. 12.4 ,P No-140) Geophysical investigation Each 5552.4 5552.4 2.0 False None None False None False 11104.8 0 3211929 110619 None 002 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth) (WS & Sewerage Works Vol V CSR for the 2023-24 Sl No. 12.2 ,P No-139) Borewell depth of 0 to 50 m m 324.45 324.45 50.0 False None None False None False 16222.5 0 3211930 110619 None 003 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth) (WS & Sewerage Works Vol V CSR for the 2023-24 Sl No. 12.2 ,P No-139) Borewell depth of 50 to 100 m m 406.35 406.35 50.0 False None None False None False 20317.5 0 3211931 110619 None 004 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth) (WS & Sewerage Works Vol V CSR for the 2023-24 Sl No. 12.2 ,P No-139) Borewell depth of 100 to 150 m m 432.6 432.6 50.0 False None None False None False 21630.0 0 3211932 110619 None 005 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty.(WS & Sewerage Works Vol V CSR for the 2023-24 Sl No. 12.32 ,P No-143) m 2029.65 2029.65 12.0 False None None False None False 24355.8 0 1717154060000 0 None None Buildings For Pumping Machinery 81832.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211933 110620 None 001 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. Each 10678.5 10678.5 1.0 False None None False None False 10678.5 0 3211934 110620 None 002 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (1X3X4 m2) Mtr 141.75 141.75 150.0 False None None False None False 21262.5 0 3211935 110620 None 003 Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. a.63mm Each 436.8 436.8 1.0 False None None False None False 436.8 0 3211936 110620 None 004 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments size 50mm Each 1312.5 1312.5 1.0 False None None False None False 1312.5 0 3211937 110620 None 005 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter Outdoor type Board: upto 6 HP Each 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3211938 110620 None 006 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 3.0 False None None False None False 1732.5 0 3211939 110620 None 007 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. Per 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3211940 110620 None 008 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : PE80 (PN 6.0 / 6 Kg/cm2) a. 63mm Mtr 150.15 150.15 150.0 False None None False None False 22522.5 0 3211941 110620 None 009 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3211942 110620 None 010 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1417.5 1417.5 1.0 False None None False None False 1417.5 0 3211943 110620 None 011 Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen insulating compound complete with terminals clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. Each 472.5 472.5 1.0 False None None False None False 472.5 0 3211944 110620 None 012 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) a.50 mm Each 3202.5 3202.5 1.0 False None None False None False 3202.5 0 3211945 110620 None 013 Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 1717154060000 0 None None Buildings For Compound wall 1957920.46 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3211946 110621 None 001 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth (PWD CSR VOL I for the year 2023-24. I. No. 1.15.1 P.No. 08) Cum 381.15 381.15 101.09 False None None False None False 38530.4535 0 3211947 110621 None 002 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. (PWD CSR VOL I for the year 2023-24. I. No. 1.4.1 P.No. 05) Cum 313.95 313.95 92.01 False None None False None False 28886.5395 0 3211948 110621 None 003 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.1.4 P.No. 15) Cum 6527.85 6527.85 7.55 False None None False None False 49285.2675 0 3211949 110621 None 004 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112) Cum 3916.71 3916.71 7.55 False None None False None False 29571.1605 0 3211950 110621 None 005 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24 I. No. 2.1.3 P.No.15) PLAIN CEMENT CONCRETE M10 Cum 6288.45 6288.45 11.23 False None None False None False 70619.2935 0 3211951 110621 None 006 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD CSR VOL I for the year 2023-24. I. No. 1.11 P.No. 07) Cum 454.65 454.65 71.03 False None None False None False 32293.7895 0 3211952 110621 None 007 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) FOOTING Cum 6652.8 6652.8 15.6 False None None False None False 103783.68 0 3211953 110621 None 008 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for isolated footings 8% (PWD CSR VOL I for the year 2023-24. Sl. No. 1(a) , P.No. 111) Cum 532.22 532.22 15.6 False None None False None False 8302.632 0 3211954 110621 None 009 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24. I. No. 2.2.3 P.No. 15) COLUMN Cum 6652.8 6652.8 3.23 False None None False None False 21488.544 0 3211955 110621 None 010 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 , P.No. 111) Cum 4656.96 4656.96 3.23 False None None False None False 15041.9808 0 3211956 110621 None 011 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24, I. No. 2.4.3 P.No.16) GRADE BEAM Cum 6652.8 6652.8 16.15 False None None False None False 107442.72 0 3211957 110621 None 012 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings 50%. (PWD CSR VOL I for the year 2023-24. Sl. No. 2 P.No. 111) Cum 3325.4 3325.4 16.15 False None None False None False 53705.21 0 3211958 110621 None 013 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD CSR VOL I for the year 2023-24. I. No. 2.5.2 P.No. 16) Cum 7185.15 7185.15 8.16 False None None False None False 58630.824 0 3211959 110621 None 014 Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 , P.No. 111) Cum 239.51 239.51 8.16 False None None False None False 1954.4016 0 3211960 110621 None 015 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR for Buildings VOL II for the year 2023-24. I. No. 5.1.1 P.No. 09) Cum 5891.55 5891.55 26.4 False None None False None False 155536.92 0 3211961 110621 None 016 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 6.32 P.No. 17) Cum 1375.5 1375.5 277.16 False None None False None False 381233.58 0 3211962 110621 None 017 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR FOR BUILDING VOL II for the year 2023-24, I. No. 8.3.2 P.No.41 ) OUTSIDE PLASTERING Sqm 349.65 349.65 705.8 False None None False None False 246782.97 0 3211963 110621 None 018 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 11.25.2 P.No. 84) Kg 142.8 142.8 168.0 False None None False None False 23990.4 0 3211964 110621 None 019 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.33.3 P.No. 47) PAINTING TO GATE Sqm 145.95 145.95 12.0 False None None False None False 1751.4 0 3211965 110621 None 020 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 8.30 P.No. 46) EXTERIOR PAINTING Sqm 182.7 182.7 705.8 False None None False None False 128949.66 0 3211966 110621 None 021 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (PWD SR FOR BUILDING VOL II for the year 2023-24, I. No. 2.11(a) P.No.18) Tonne 93929.85 93929.85 3.79 False None None False None False 355994.1315 0 3211967 110621 None 022 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (PWD CSR VOL I for the year 2023-24 I. No. 2.1.3 P.No.15) PLAIN CEMENT CONCRETE M10 Cum 6288.45 6288.45 7.02 False None None False None False 44144.919 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1717154061000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1717154061000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1717154061000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1717154061000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1717154061000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1717154078000 0 None None ELIGIBILITY Qualifications of the tenderer required as mentioned in the Technical Bid KW-4 in General conditions 3 must be furnished. None 1717154083000 0 None None ELIGIBILITY Tender of the contractor, who have not completed the work in time, not executed the agreement in time in any other cases in this Division as per Clause 3.4 of Standard Tender Document and practices as mentioned in clause 25 of the standard tender document will not be accepted. None 1717154087000 0 None None ELIGIBILITY The undersigned reserves the right to accept any or all tenders without assigning any reason. None 1717154091000 0 None None ELIGIBILITY Contractor should execute the work by procuring cement, steel any other materials/Machinery for the work on their own and necessary quality test certificate should be produced and approval of the same. None 1717154095000 0 None None ELIGIBILITY Other details can be seen in the tender documents None 1717154098000 0 None None ELIGIBILITY Contractors should have to upload the Scan copy of all necessary Qualification Documents/ Certificates, and submitted duly attested by notary while tender Evaluvation in this Division None 1717154102000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal. None 1717154106000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 Qualification of Instructions to Tenders (ITT), will only be considered for evaluation. None 1717154113000 0 None None ELIGIBILITY Contractors should have to upload the necessary Qualification details as Section 3 Clause 1.1 to 1.10 in prescribed formats of KW-4. None 1717154117000 0 None None ELIGIBILITY The contractor should counter check all the designs of the scheme before execution / procurement of material and bring to the notice of the departmental officers for rectification. None 1717154122000 0 None None ELIGIBILITY The contractors have to verify the designs and drawings prepared by the department and supplied for construction. correct the same for any mistakes and to submit it for the approval of the department prior to commencement of execution. None 1717154126000 0 None None ELIGIBILITY The contractor should furnish the Contractor license Certificate None 1717154131000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Raichur within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-4. None 1717154135000 0 None None ELIGIBILITY The Building constructed under this programme shall be of high standard, requiring no major repairs for 3 years, The contractor shall furnish performance guarantee for 3 years as per clause and the performance guarantee will be released only after 3 years after completion of work. None 1717154139000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required. None 1717154143000 0 None None ELIGIBILITY Third party inspection is mandatory for all the works in this programme None 1717154147000 0 None None ELIGIBILITY The work should be completed within the stipulated period from the date of agreement & The date of agreement itself is the date of commencement of the work None 1717154154000 0 None None ELIGIBILITY The work should be completed in 11 months (including mansoon) None 1717154158000 0 None None ELIGIBILITY The defect liability period is 2 years and 3 years for major construction repairs. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 381.90 Lakhs) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Satisfactorily completed as prime contractor at-least one such similar work of value not less than Rs. 95.47 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work (1. Earthwork exaction & Construction of Embankment: 1899.00 Cum, 2. PCC/RCC : 436.27 Cum 3) Steel- 30.96 Tone 4) SSM/BBM -955.00 Cum, 5) Flooring - 783.95 Sqm, 6) Plastering- 3108.48 Sqm) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 52.07 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText PWD Contractor Registration Certificate True Technical Bid Previous Five years Financial Turn over 2019-20 to 2023-24 True Technical Bid Similar nature Work done Certificate True Technical Bid Quantity wise Work done certificate True Technical Bid Line of credit Bank letter head True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1717582541000 version 0 createdDate None modifiedDate None blockNumber Office of the Executive Engineer, P.R.E.Divisioin, Beside District Court Complex, Arab Mohalla, RAICHUR street None city Raichur state Karnataka pin 584101
tenderRecallDTO	None