createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718084197255 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 5510.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 24-06-2024 16:00:00 tenderQueryClose 21-06-2024 12:00:00 technicalBidOpen None publishedDate 14-06-2024 16:26:09 publishedByPost RDPR_EE_DIV_SRS publishedByUser KPE13012 - SATISH HAYAGRIVACHARYA JAHAGIRDAR bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson EXECUTIVE ENGINEER splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08384226381 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1718084197258 version 14 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT4731/CALL-2 title Construction of Toilet at Balikoppa HPS of Pattana Panchayath in Siddapur Tq (SC) description Construction of Toilet at Balikoppa HPS of Pattana Panchayath in Siddapur Tq (SC) category WORKS categoryText Works ecv 440439.68 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 976 locationName RDPR Division Office Sirsi provisionalAmount 520000.0 groupOverheadTotal None fileNumber AEE/PRED/SDP/SCHOOL/2023-24/05
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718084197000 0 None None Buildings Construction of Toilet at Balikoppa HPS of Pattana Panchayath in Siddapur Tq (SC) 440439.68 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3264297 113078 None 2023-24-19.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 1862.56 1862.56 6.73 False None None False None False 12535.0288 0 3264298 113078 None 2023-24-1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches ,foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- WORK COMPLETE WITHIN 2 MONTHS Cum 271.04 271.04 5.1 False None None False None False 1382.304 0 3264299 113078 None 2023-24-2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHS Cum 6343.68 6343.68 3.04 False None None False None False 19284.7872 0 3264300 113078 None 2023-24-5.5 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 7138.88 7138.88 3.26 False None None False None False 23272.7488 0 3264301 113078 None 2023-24-5.6 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 7221.76 7221.76 3.58 False None None False None False 25853.9008 0 3264302 113078 None 2023-24-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 297.92 297.92 6.84 False None None False None False 2037.7728 0 3264303 113078 None 2023-24-2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHS Cum 6963.04 6963.04 0.36 False None None False None False 2506.6944 0 3264304 113078 None 2023-24-5.7 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 7565.6 7565.6 5.48 False None None False None False 41459.488 0 3264305 113078 None 2023-24-6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 8935.36 8935.36 0.17 False None None False None False 1519.0112 0 3264306 113078 None 2023-24-6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction ofengineer incharge ofwork. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 9196.32 9196.32 2.1 False None None False None False 19312.272 0 3264307 113078 None 2023-24-2.4.2 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHS Cum 7435.85 7435.85 1.02 False None None False None False 7584.567 0 3264308 113078 None 2023-24-2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Lintel. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 9196.99 9196.99 0.13 False None None False None False 1195.6087 0 3264309 113078 None 2023-24-2.5.3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Slab. ---- WORK COMPLETE WITHIN 2 MONTHS Cum 11496.24 11496.24 3.19 False None None False None False 36673.0056 0 3264310 113078 None 2023-24-2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- WORK COMPLETE WITHIN 2 MONTHS Tonne 100191.84 100191.84 0.358 False None None False None False 35868.67872 0 3264311 113078 None 2023-24-12.98.1 Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer. Cross section of 60 mm x 100 mm ---- WORK COMPLETE WITHIN 2 MONTHS Rmtr 963.2 963.2 20.4 False None None False None False 19649.28 0 3264312 113078 None 2023-24-12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 1778.56 1778.56 5.4 False None None False None False 9604.224 0 3264313 113078 None 2023-24-8.3.2 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 372.96 372.96 109.86 False None None False None False 40973.3856 0 3264314 113078 None 2023-24-9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 1205.12 1205.12 9.62 False None None False None False 11593.2544 0 3264315 113078 None 2023-24-9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 1559.04 1559.04 26.47 False None None False None False 41267.7888 0 3264316 113078 None 2023-24-8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 153.44 153.44 109.86 False None None False None False 16856.9184 0 3264317 113078 None 2023-24-14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. ---- WORK COMPLETE WITHIN 2 MONTHS Nos 5470.08 5470.08 2.0 False None None False None False 10940.16 0 3264318 113078 None 2023-24-9.34 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. ---- WORK COMPLETE WITHIN 2 MONTHS Sqm 1730.4 1730.4 8.4 False None None False None False 14535.36 0 3264319 113078 None 2023-24-14.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. ---- WORK COMPLETE WITHIN 2 MONTHS Nos 1292.48 1292.48 7.0 False None None False None False 9047.36 0 3264320 113078 None 2023-24-14.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps ---- WORK COMPLETE WITHIN 2 MONTHS Nos 3209.92 3209.92 2.0 False None None False None False 6419.84 0 3264321 113078 None 2023-24-13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- WORK COMPLETE WITHIN 2 MONTHS Ltr 10.08 10.08 500.0 False None None False None False 5040.0 0 3264322 113078 None 2023-24-13.17.2 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 g ---- WORK COMPLETE WITHIN 2 MONTHS Nos 236.32 236.32 4.0 False None None False None False 945.28 0 3264323 113078 None 2023-24-233 Circular shape 450 mm dia Mirror with Plastic moulded frame ---- WORK COMPLETE WITHIN 2 MONTHS Nos 448.0 448.0 2.0 False None None False None False 896.0 0 3264324 113078 None 2023-24-13.50.3 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25mm dia. ---- WORK COMPLETE WITHIN 2 MONTHS Rmtr 250.88 250.88 22.0 False None None False None False 5519.36 0 3264325 113078 None 2023-24-13.50.6 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100mm dia. ---- WORK COMPLETE WITHIN 2 MONTHS Rmtr 1041.6 1041.6 16.0 False None None False None False 16665.6 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718084197000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718084197000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1718084197000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1718084197000 0 None None ELIGIBILITY Department Registration Details None 1718084197000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1718084197000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1718084197000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1718084197000 0 None None ELIGIBILITY Banker Details None 1718084197000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end. None 1718084197000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718084197000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1718084197000 0 None None ELIGIBILITY The bid is to be submitted through GOK kppp platform www.kppp.karnataka.gov.in only. None 1718084197000 0 None None ELIGIBILITY Tenderers who have not registered in the GOK kppp portal should be registered through web site www.kppp.karnataka.gov.in None 1718084197000 0 None None ELIGIBILITY The Tenderer should obtain tender documents through kppp web site www.kppp.karnataka.gov.in at free of cost. Additional conditions and informations also can be obtained through the above mentioned website None 1718084197000 0 None None ELIGIBILITY Any damage during the progress of work, the damage cost should be beared by the contractor. None 1718084197000 0 None None ELIGIBILITY Tender application cost will not be refundable or exchangeable in case of cancellation of tender. None 1718084197000 0 None None ELIGIBILITY All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost. None 1718084197000 0 None None ELIGIBILITY Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost. None 1718084197000 0 None None ELIGIBILITY Corrigendums / modifications / correction, if any, will be published in the website only. None 1718084197000 0 None None ELIGIBILITY More details should be collected from the office at working hours None 1718084197000 0 None None ELIGIBILITY The Executive Engineer, PRE SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered in KPWD with kppp portal for the construction of works None 1718084197000 0 None None ELIGIBILITY If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost (Additional Security Deposit) should be paid by the contractor, through FDR in the favour of Executive Engineer at the time of Agreement. None 1718084197000 0 None None ELIGIBILITY GST Shall be paid to the tendered amount separately None 1718084197000 0 None None ELIGIBILITY Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. None 1718084197000 0 None None ELIGIBILITY The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work. None 1718084197000 0 None None ELIGIBILITY The Executive Engineer rights accept and reject the tender without intimation or information None 1718084197000 0 None None ELIGIBILITY The contractor should scan the PWD Registration None 1718084197000 0 None None ELIGIBILITY The contractor should scan the PAN card and GST No None 1718084197000 0 None None ELIGIBILITY Contractors Postal address and Mobile No None 1718084197000 0 None None ELIGIBILITY Tendering should strictly adhere to Govt. order gazette notification FINANCE SECRETARIAT NOTIFICATION No:FD/876 Exp-12/2017 BENGALURU DATED:15-09-2017 None 1718084197000 0 None None ELIGIBILITY Only contractor belongs to scheduled Caste SC category and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority with RD No. as per the CEO ZP Karwar Order No. E-36126 / 2022-23, Dated 29-08-2022 which should be uploaded. None 1718084197000 0 None None ELIGIBILITY EMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal. None 1718084197000 0 None None ELIGIBILITY Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder None 1718084197000 0 None None ELIGIBILITY Contractor should obey with the above conditions in addition to the KW-1 None 1718084197000 0 None None ELIGIBILITY Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs: 4.41 lakhs None 1718084197000 0 None None ELIGIBILITY Turn over Certificate should be enclosed for the last previous 5 years from charted accountant in singal page and achieved in at least one financial year a minimum financial turnover is equal or above of Rs: 4.41 lakhs None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Reserved Category Certificate True Technical Bid The Executive Engineer, P.R.E.. SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered Eligible Contractor in KPWD and enrolled with kppp portal for the construction of works True Technical Bid KW-1 format 1.3 A & 1.3 B compulsary Submitted with details True Technical Bid The available tender capacity should be not less than Rs. 4.41 lakhs True Technical Bid Turnover Certificate From Charted Account For last Five years True Technical Bid The Contractor should scan the PAN Card and GST No. True Technical Bid Contractors Postal Address and Mobile No. True Technical Bid EMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal. True Technical Bid Only contractor belongs to scheduled Caste SC category and resident of Karnataka State for more than 10 years should participate in tender along with caste Certificate and Domicile Certificate issued by competent authority with RD No. as per the CEO ZP Karwar Order No. E-36126 / 2022-23, Dated 29-08-2022 which should be uploaded. True Technical Bid Tendering should strictly adhere to Govt. order gazette notification FINANCE SECRETARIAT NOTIFICATION No.FD/876 Exp-12/2017 BENGALURU DATED. 15-09-2017 True Technical Bid Residential Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None