createdTsNone
versionNone
createdDateNone
modifiedDateNone
noticeInvitingTenderDTO
createdTs1717744916524
version8
createdDateNone
modifiedDateNone
tenderTypeRFQ
evaluationTypeTWO_COVER
evaluationTypeTextTwo Cover
invitingStrategyOPEN
invitingStrategyTextOpen
taxTypeINCLUSIVE_TAX
tenderFee4550.00
emd272500.00
bidValueTypeITEM_WISE
bidValueTypeTextItem wise
tenderReceiptClose27-06-2024 16:00:00
tenderQueryClose24-06-2024 11:00:00
technicalBidOpen28-06-2024 17:00:00
publishedDate13-06-2024 19:12:44
publishedByPostRDPR_EE_DIV_HAV
publishedByUserKPE10818 - S.DEVARAJU
bidValidityPeriod90
noOfCalls1
preBidMeetingDate14-06-2024 11:30:00
preBidMeetingYnTrue
preQualificationBidOpenNone
denominationTypeRUPEES
denominationTypeTextRupees
retenderedYnNone
percentageRateTypeTextNone
contactPersonEE PRE Division Haveri
splitEmdRequiredYnFalse
emdBankGuaranteeNone
emdCashNone
bgValidityPeriodNone
hideWeightageNone
multipleCurrencySelectionAllowedYnFalse
isTechWeightageAllowedFalse
highestBidderSelectionFalse
isVariableEmdAllowedNone
qcbsTenderYnNone
itemwiseEmdRequiredYnNone
sampleSubmissionDateNone
officeNumber08375232454
mobileNumber9986297457
tenderSupplierListNone
tenderSchedule
createdTs1717744916567
version8
createdDateNone
modifiedDateNone
tenderNumberRDPR/2024-25/BD/WORK_INDENT5111
titleConstruction of Karnatak Public School Building at Karajagi village in Havreri Taluk of Haveri District.
descriptionConstruction of Karnatak Public School Building at Karajagi village in Havreri Taluk of Haveri District.
categoryWORKS
categoryTextWorks
ecv18163998.60
deptNameRural Development and Panchayat Raj Department
statusPUBLISHED
statusTextPublished
remarksNone
csrValueNone
ecvtenderYnTrue
location940
locationNameRDPR Division Office Haveri
provisionalAmount18697000.0
groupOverheadTotal2770779.45
fileNumberAEE/PRE-Sub/Dn/HVR/Karjagi/building/2023-24
tenderSubEstimateList
createdTsversioncreatedDatemodifiedDateworkCategoryNamesubEstimateNameestimateTotalitemList
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (Ground floor work)8268183.85
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244129112230Nonecode01Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mCum102.0102.0479.62FalseNoneNoneFalseNoneFalse48921.240
3244130112230Nonecode02Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregatesCum5664.05664.0191.38FalseNoneNoneFalseNoneFalse1083976.320
3244131112230Nonecode03Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 3% Centering charges)Cum6526.086526.0882.31FalseNoneNoneFalseNoneFalse537161.64480
3244132112230Nonecode04Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 5% Centering charges)Cum6652.086652.0813.04FalseNoneNoneFalseNoneFalse86743.12320
3244133112230Nonecode05Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum10771.210771.27.25FalseNoneNoneFalseNoneFalse78091.20
3244134112230Nonecode06Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum11633.011633.012.37FalseNoneNoneFalseNoneFalse143900.210
3244135112230Nonecode07Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Cum7978.07978.046.77FalseNoneNoneFalseNoneFalse373131.060
3244136112230Nonecode08Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Sqm279.0279.0381.92FalseNoneNoneFalseNoneFalse106555.680
3244137112230Nonecode09Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum9504.09504.05.44FalseNoneNoneFalseNoneFalse51701.760
3244138112230Nonecode10Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Cum266.0266.0479.62FalseNoneNoneFalseNoneFalse127578.920
3244139112230Nonecode11Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Cum433.0433.0128.88FalseNoneNoneFalseNoneFalse55805.040
3244140112230Nonecode12Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Cum7969.07969.0101.85FalseNoneNoneFalseNoneFalse811642.650
3244141112230Nonecode13Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Sqm1033.01033.044.58FalseNoneNoneFalseNoneFalse46051.140
3244142112230Nonecode14Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum10264.510264.54.27FalseNoneNoneFalseNoneFalse43829.4150
3244143112230Nonecode15Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 60% Centering charges)Cum10948.810948.840.05FalseNoneNoneFalseNoneFalse438499.440
3244144112230Nonecode16Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 50% Centering charges)Cum10264.510264.575.65FalseNoneNoneFalseNoneFalse776509.4250
3244145112230Nonecode17Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 45% Centering charges)Cum9922.359922.351.48FalseNoneNoneFalseNoneFalse14685.0780
3244146112230Nonecode18Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne89457.089457.019.22FalseNoneNoneFalseNoneFalse1719363.540
3244147112230Nonecode19Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Out side only)Sqm279.0279.0633.81FalseNoneNoneFalseNoneFalse176832.990
3244148112230Nonecode20Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(In side only)Sqm279.0279.0754.03FalseNoneNoneFalseNoneFalse210374.370
3244149112230Nonecode21Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mmSqm1082.01082.0500.02FalseNoneNoneFalseNoneFalse541021.640
3244150112230Nonecode22Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Sqm2582.02582.03.6FalseNoneNoneFalseNoneFalse9295.20
3244151112230Nonecode23Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.Sqm889.0889.066.0FalseNoneNoneFalseNoneFalse58674.00
3244152112230Nonecode24Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm89.089.0633.81FalseNoneNoneFalseNoneFalse56409.090
3244153112230Nonecode25Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm80.080.01148.3FalseNoneNoneFalseNoneFalse91864.00
3244154112230Nonecode26Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by weldingKgs168.0168.0734.4FalseNoneNoneFalseNoneFalse123379.20
3244155112230Nonecode27Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Kgs138.0138.0330.0FalseNoneNoneFalseNoneFalse45540.00
3244156112230Nonecode28Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.Sqm4478.04478.066.6FalseNoneNoneFalseNoneFalse298234.80
3244157112230Nonecode29Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm139.0139.0168.52FalseNoneNoneFalseNoneFalse23424.280
3244158112230Nonecode30Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the framem643.0643.045.2FalseNoneNoneFalseNoneFalse29063.60
3244159112230Nonecode31Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast onolithically with 5 mm thick FRP laminate for panels conforming to IS:14856, including fixing to frames. 30 mm thicknessSqm3204.03204.014.7FalseNoneNoneFalseNoneFalse47098.80
3244160112230Nonecode32Providing wall black boards in 12mm thick with CM 1:3 and applied with primer and two coats of acrylic emulsion black paint including finishing etc.Sqm475.0475.027.0FalseNoneNoneFalseNoneFalse12825.00
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (First floor work)6020210.9
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244161112231Nonecode01Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum11749.4311749.4312.81FalseNoneNoneFalseNoneFalse150510.19830
3244162112231Nonecode02Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum11383.7111383.714.42FalseNoneNoneFalseNoneFalse50315.99820
3244163112231Nonecode03Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Cum8048.698048.69155.85FalseNoneNoneFalseNoneFalse1254388.33650
3244164112231Nonecode04Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Sqm1043.331043.3321.13FalseNoneNoneFalseNoneFalse22045.56290
3244165112231Nonecode05Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum10367.1510367.156.28FalseNoneNoneFalseNoneFalse65105.7020
3244166112231Nonecode06Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(add 60% Centering charges)Cum11058.2911058.2939.67FalseNoneNoneFalseNoneFalse438682.36430
3244167112231Nonecode07Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(add 50% Centering charges)Cum10367.1510367.1575.65FalseNoneNoneFalseNoneFalse784274.89750
3244168112231Nonecode08Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(add 45% Centering charges)Cum10021.5710021.571.41FalseNoneNoneFalseNoneFalse14130.41370
3244169112231Nonecode09Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne90351.5790351.5712.67FalseNoneNoneFalseNoneFalse1144754.39190
3244170112231Nonecode10Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Sqm281.79281.79900.94FalseNoneNoneFalseNoneFalse253875.88260
3244171112231Nonecode11Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(In side only)Sqm281.79281.79664.98FalseNoneNoneFalseNoneFalse187384.71420
3244172112231Nonecode12Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mmSqm1092.821092.82456.7FalseNoneNoneFalseNoneFalse499090.8940
3244173112231Nonecode13Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Sqm2607.822607.823.6FalseNoneNoneFalseNoneFalse9388.1520
3244174112231Nonecode14Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.Sqm897.89897.8975.3FalseNoneNoneFalseNoneFalse67611.1170
3244175112231Nonecode15Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm89.8989.89900.94FalseNoneNoneFalseNoneFalse80985.49660
3244176112231Nonecode16Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm80.880.8995.58FalseNoneNoneFalseNoneFalse80442.8640
3244177112231Nonecode17Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by weldingKg169.68169.68723.6FalseNoneNoneFalseNoneFalse122780.4480
3244178112231Nonecode18Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Kg139.38139.38180.0FalseNoneNoneFalseNoneFalse25088.40
3244179112231Nonecode19Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.Sqm4522.784522.7865.52FalseNoneNoneFalseNoneFalse296332.54560
3244180112231Nonecode20Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm140.39140.39155.21FalseNoneNoneFalseNoneFalse21789.93190
3244181112231Nonecode21Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the framem649.43649.4333.9FalseNoneNoneFalseNoneFalse22015.6770
3244182112231Nonecode22Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 30 mm thicknessSqm3236.043236.0411.03FalseNoneNoneFalseNoneFalse35693.52120
3244183112231Nonecode23Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.Sqm479.75479.7518.0FalseNoneNoneFalseNoneFalse8635.50
3244184112231Nonecode24Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesCum11865.7611865.762.86FalseNoneNoneFalseNoneFalse33936.07360
3244185112231Nonecode25Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Cum8128.388128.3826.73FalseNoneNoneFalseNoneFalse217271.59740
3244186112231Nonecode26Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne91246.1491246.140.26FalseNoneNoneFalseNoneFalse23723.99640
3244187112231Nonecode27Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Sqm284.58284.58142.45FalseNoneNoneFalseNoneFalse40538.4210
3244188112231Nonecode28Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Kg138.72138.7258.46FalseNoneNoneFalseNoneFalse8109.57120
3244189112231Nonecode29Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Sqm579.36579.3639.0FalseNoneNoneFalseNoneFalse22595.040
3244190112231Nonecode30Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sqm90.7890.78139.48FalseNoneNoneFalseNoneFalse12661.99440
3244191112231Nonecode31Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.Sqm4522.784522.785.76FalseNoneNoneFalseNoneFalse26051.21280
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (Water supply and sanitary work)283546.36
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244192112232Nonecode01Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipesm242.0242.050.0FalseNoneNoneFalseNoneFalse12100.00
3244193112232Nonecode02Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipesm318.0318.050.0FalseNoneNoneFalseNoneFalse15900.00
3244194112232Nonecode03Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipesm536.0536.050.0FalseNoneNoneFalseNoneFalse26800.00
3244195112232Nonecode04Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal boreNos549.0549.04.0FalseNoneNoneFalseNoneFalse2196.00
3244196112232Nonecode05Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal boreNos314.0314.04.0FalseNoneNoneFalseNoneFalse1256.00
3244197112232Nonecode06Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal boreNos702.0702.04.0FalseNoneNoneFalseNoneFalse2808.00
3244198112232Nonecode07Providing and fixing brass stop cock of approved quality : 15 mm nominal boreNos299.0299.012.0FalseNoneNoneFalseNoneFalse3588.00
3244199112232Nonecode08Providing and fixing brass stop cock of approved quality : 20 mm nominal boreNos305.0305.012.0FalseNoneNoneFalseNoneFalse3660.00
3244200112232Nonecode09Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tapsEach2866.02866.06.0FalseNoneNoneFalseNoneFalse17196.00
3244201112232Nonecode10Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsEach4884.04884.010.0FalseNoneNoneFalseNoneFalse48840.00
3244202112232Nonecode11Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cisternEach4454.04454.06.0FalseNoneNoneFalseNoneFalse26724.00
3244203112232Nonecode12Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories completeEach220.0220.012.0FalseNoneNoneFalseNoneFalse2640.00
3244204112232Nonecode13Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : * 100 mm inlet and 75 mm outlet * Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905Each475.0475.018.0FalseNoneNoneFalseNoneFalse8550.00
3244205112232Nonecode14Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm diaEach88.088.012.0FalseNoneNoneFalseNoneFalse1056.00
3244206112232Nonecode15Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.Ltr9.09.08000.0FalseNoneNoneFalseNoneFalse72000.00
3244207112232Nonecode16Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameterm291.0291.050.0FalseNoneNoneFalseNoneFalse14550.00
3244208112232Nonecode17Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay (non modular) bricks of class designation 3.5No1706.01706.04.0FalseNoneNoneFalseNoneFalse6824.00
3244209112232Nonecode18Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 mCum262.0262.08.78FalseNoneNoneFalseNoneFalse2300.360
3244210112232Nonecode19Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Details of cost for 10 m Cost per mCum160.0160.04.05FalseNoneNoneFalseNoneFalse648.00
3244211112232Nonecode20Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. 1.00 HP/0.75KW 10 STGEach13910.013910.01.0FalseNoneNoneFalseNoneFalse13910.00
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (Electrical GF & FF work)534797.0
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244212112233Nonecode01Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thickMtr69.069.0800.0FalseNoneNoneFalseNoneFalse55200.00
3244213112233Nonecode02Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thickMtr66.066.0600.0FalseNoneNoneFalseNoneFalse39600.00
3244214112233Nonecode03Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm)Each86.086.025.0FalseNoneNoneFalseNoneFalse2150.00
3244215112233Nonecode04Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switchPoint285.0285.030.0FalseNoneNoneFalseNoneFalse8550.00
3244216112233Nonecode05Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switchPoint394.0394.030.0FalseNoneNoneFalseNoneFalse11820.00
3244217112233Nonecode06Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switchPoint570.0570.020.0FalseNoneNoneFalseNoneFalse11400.00
3244218112233Nonecode07Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches.Point708.0708.05.0FalseNoneNoneFalseNoneFalse3540.00
3244219112233Nonecode08Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 1.5 mm2Mtr26.026.01500.0FalseNoneNoneFalseNoneFalse39000.00
3244220112233Nonecode09Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 2.5 mm2Mtr42.042.01500.0FalseNoneNoneFalseNoneFalse63000.00
3244221112233Nonecode10Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 4 mm2Mtr63.063.0500.0FalseNoneNoneFalseNoneFalse31500.00
3244222112233Nonecode11Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 6 mm2Mtr92.092.0350.0FalseNoneNoneFalseNoneFalse32200.00
3244223112233Nonecode12Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854 6A 3/5 WayEach147.0147.010.0FalseNoneNoneFalseNoneFalse1470.00
3244224112233Nonecode13Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing boxEach646.0646.012.0FalseNoneNoneFalseNoneFalse7752.00
3244225112233Nonecode14Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.Sq CM0.410.411000.0FalseNoneNoneFalseNoneFalse410.00
3244226112233Nonecode15Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 10" x 7" x 3" (254 x 178 x 76 mm)Each112.0112.015.0FalseNoneNoneFalseNoneFalse1680.00
3244227112233Nonecode16Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mmEach139.0139.020.0FalseNoneNoneFalseNoneFalse2780.00
3244228112233Nonecode17Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mmEach179.0179.024.0FalseNoneNoneFalseNoneFalse4296.00
3244229112233Nonecode18Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 AEach241.0241.016.0FalseNoneNoneFalseNoneFalse3856.00
3244230112233Nonecode19Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DPEach415.0415.08.0FalseNoneNoneFalseNoneFalse3320.00
3244231112233Nonecode20Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 4 Way SP & NEach1241.01241.04.0FalseNoneNoneFalseNoneFalse4964.00
3244232112233Nonecode21Supplying of feet-PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80 Power Input:220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1x4-20/22 WEach690.0690.060.0FalseNoneNoneFalseNoneFalse41400.00
3244233112233Nonecode22Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm diaNo3510.03510.08.0FalseNoneNoneFalseNoneFalse28080.00
3244234112233Nonecode23Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.Each490.0490.020.0FalseNoneNoneFalseNoneFalse9800.00
3244235112233Nonecode24Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular modelEach2984.02984.024.0FalseNoneNoneFalseNoneFalse71616.00
3244236112233Nonecode25Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.Each315.0315.024.0FalseNoneNoneFalseNoneFalse7560.00
3244237112233Nonecode26Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two ModuleEach357.0357.024.0FalseNoneNoneFalseNoneFalse8568.00
3244238112233Nonecode27Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4C x 4 mmMtr225.0225.080.0FalseNoneNoneFalseNoneFalse18000.00
3244239112233Nonecode28Lafbour charges for laying of 1.1 KV class UG cable in existing trench/ GI pipe/ stone ware pipe / on wall on pole a required in existing trench/duct. 25 sqmm to 75 sqmmMtr15.515.550.0FalseNoneNoneFalseNoneFalse775.00
3244240112233Nonecode29Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 mCum262.0262.015.0FalseNoneNoneFalseNoneFalse3930.00
3244241112233Nonecode30Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Details of cost for 10 m Cost per mCum160.0160.015.0FalseNoneNoneFalseNoneFalse2400.00
3244242112233Nonecode31Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 100 AEach7090.07090.02.0FalseNoneNoneFalseNoneFalse14180.00
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (Sump Tank work)116041.21
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244243112234Nonecode01Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mCum102.0102.019.8FalseNoneNoneFalseNoneFalse2019.60
3244244112234Nonecode02Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregatesCum5664.05664.01.12FalseNoneNoneFalseNoneFalse6343.680
3244245112234Nonecode03Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 3% Centering charges)Cum6526.086526.080.89FalseNoneNoneFalseNoneFalse5808.21120
3244246112234Nonecode04Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Cum266.0266.08.91FalseNoneNoneFalseNoneFalse2370.060
3244247112234Nonecode05Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 35% Centering charges)Cum8553.08553.03.7FalseNoneNoneFalseNoneFalse31646.10
3244248112234Nonecode06Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 50% Centering charges)Cum9504.09504.00.83FalseNoneNoneFalseNoneFalse7888.320
3244249112234Nonecode07Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne89457.089457.00.52FalseNoneNoneFalseNoneFalse46517.640
3244250112234Nonecode08Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Sqm349.0349.032.4FalseNoneNoneFalseNoneFalse11307.60
3244251112234Nonecode09Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.No2140.02140.01.0FalseNoneNoneFalseNoneFalse2140.00
17177449170000NoneNoneBuildingsConstruction of Karnatak Public School Building at Karjagi village (Septic Tankand soak pit work)170439.83
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3244252112235Nonecode01Septic Tank: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mCum102.0102.034.64FalseNoneNoneFalseNoneFalse3533.280
3244253112235Nonecode02Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregatesCum5664.05664.01.44FalseNoneNoneFalseNoneFalse8156.160
3244254112235Nonecode03Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 3% Centering charges)Cum6526.086526.082.4FalseNoneNoneFalseNoneFalse15662.5920
3244255112235Nonecode04Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Cum266.0266.014.98FalseNoneNoneFalseNoneFalse3984.680
3244256112235Nonecode05Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.Cum7978.07978.05.18FalseNoneNoneFalseNoneFalse41326.040
3244257112235Nonecode06Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne89457.089457.00.21FalseNoneNoneFalseNoneFalse18785.970
3244258112235Nonecode07Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Sqm279.0279.049.39FalseNoneNoneFalseNoneFalse13779.810
3244259112235Nonecode08Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.No2140.02140.02.0FalseNoneNoneFalseNoneFalse4280.00
3244260112235Nonecode09Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameterm291.0291.09.0FalseNoneNoneFalseNoneFalse2619.00
3244261112235Nonecode10soak pit:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 mCum102.0102.018.83FalseNoneNoneFalseNoneFalse1920.660
3244262112235Nonecode11Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregatesCum5664.05664.00.66FalseNoneNoneFalseNoneFalse3738.240
3244263112235Nonecode12Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)Cum6389.06389.05.78FalseNoneNoneFalseNoneFalse36928.420
3244264112235Nonecode13Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 3% Centering charges)Cum6526.086526.080.35FalseNoneNoneFalseNoneFalse2284.1280
3244265112235Nonecode14Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Cum266.0266.010.28FalseNoneNoneFalseNoneFalse2734.480
3244266112235Nonecode15Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (add 3% Centering charges)Cum6526.086526.080.71FalseNoneNoneFalseNoneFalse4633.51680
3244267112235Nonecode16Steel Fabrication, Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. BuildingsTonne89457.089457.00.05FalseNoneNoneFalseNoneFalse4472.850
3244268112235Nonecode17Providing Brick batsCum800.0800.02.0FalseNoneNoneFalseNoneFalse1600.00
generalCriterionList
createdTsversioncreatedDatemodifiedDatecriterionTypedescriptiontenderEligibilityCriterionDocumentList
17177449180000NoneNoneELIGIBILITYTenders from Joint ventures are not acceptable.None
17177449180000NoneNoneELIGIBILITYBidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None
17177449180000NoneNoneELIGIBILITYBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.None
17177449180000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.None
17177449180000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17177450120000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.None
17177450170000NoneNoneELIGIBILITYThe bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.None
17177450220000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17177450280000NoneNoneELIGIBILITYBidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.None
17177450320000NoneNoneELIGIBILITYThe contractor should provide daily there staff members on siteNone
17177450380000NoneNoneELIGIBILITYIf there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, Haveri. (Not in inward).None
17177450430000NoneNoneELIGIBILITYAll the scanned documents pertaining to bidder to be uploaded shall be in original & same original should be produced to The Executive Engineer (at the time of technical opening) who reserves right to verify the original documents before approval.None
17177450500000NoneNoneELIGIBILITYThe work subjected to third party inspection and inspection by other govt agencies third party inspection cost is borne by the contractor at the rate of 0.5% of the gross amount of the bill third party agency is appointed by the dept.None
17177450560000NoneNoneELIGIBILITYTenderer must have achieved in at least two financial years an average minimum financial Turn over (in all classes of civil construction works only) per financial year (ABSTRACT STATEMENT FROM CA OF 5 YEARS)None
17177450610000NoneNoneELIGIBILITYThe original documents should be produced for verification at any stage of tender process as and when sought for, failing which the bidders are liable for disqualification.None
17177450680000NoneNoneELIGIBILITYAspiring bidders/ contractors who have not obtained the user ID & Password for participating in E-Pproc in PRED,, may now obtain the same from the website www.epro.karnataka.gov.in through link contractors can contact Helpdesk HP-080 25201227 & 080 25501216None
17177450750000NoneNoneELIGIBILITYBidders/ Contractors can access tender document on the website, fill them and submit the completed tender document into electronic tender on the website itself with in the stipulated date. The blank tender document can be obtained through our website www.epro.karnataka.gov.in where electronic tender form is provided. Additional conditions and information also can be obtained through the above mentioned site.None
17177450830000NoneNoneELIGIBILITYContractors whose EMD has been forfeited already or black listed are not permitted to participate for this bid. Any tender submitted by such agencies will be rejected.None
17177450890000NoneNoneELIGIBILITYIncase of Cancellation of Tender, tender application fee will not be refunded or adjusted in any case.None
17177451110000NoneNoneELIGIBILITYBidders/contractors should attach all the scanned copies of the certificates along with their registration copy with documents pertaining to the prequalification as mentioned above(as per condition No 3 on or before the last date and time mentioned through electronic tender in the websiteNone
17177451170000NoneNoneELIGIBILITYAny arbitrary clause is not applicable to the above works. Conditional tenders are liable for rejection.None
17177459580000NoneNoneELIGIBILITYTo qualify for award of the Contract, each bidder should have attained in the last five years i.e. 2019-20 to 2023-24 a) achieved in at least two financial years a minimum financial turnover (Turnover certificate with Profit and loss statements and IT returns ) (in all classes of civil engineering construction works only) Rs:363.28 Lakhs.(turnover shall not be less than two times of amount put to tender) b) Satisfactorily completed as a prime contractor, at least one similar nature of work such as Building work of value not less than Rs.90.82 lakhs in any one year.( usually not less than 50 Percentage of the estimated value of contract)None
17177459930000NoneNoneELIGIBILITYAny taxes shall be paid as per the prevailing orders at that time.None
17177459990001NoneNoneELIGIBILITYBidder must be executed 80% of quantities in any one year during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ , for the items stated in bid documentNone
17177460050000NoneNoneELIGIBILITYThe contractor should provide daily there staff members on siteNone
17177460110000NoneNoneELIGIBILITYParticipating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-4.None
17177460770000NoneNoneELIGIBILITYMaterials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor.None
17177460830000NoneNoneELIGIBILITYAfter Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the BillsNone
17177460900000NoneNoneELIGIBILITYSuccessful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Haveri within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.None
17177460960000NoneNoneELIGIBILITYThe Eligible Contractor Should Agree the KW-4 Bid Document Conditions.None
17177461020000NoneNoneELIGIBILITYThe Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 1 years maintenanceNone
17177461070000NoneNoneELIGIBILITYThe item rates are excluding GST but inclusive of all other charges.None
17177461120000NoneNoneELIGIBILITYGST shall be paid to the tendered amount separately.None
17177462960000NoneNoneELIGIBILITYAny over writing of civil engineering words and measurements should be clarified the considered department ( No claims shoulbe considered).None
17177463020000NoneNoneELIGIBILITYThe Project Completion period is 11 months and the defect liability period of the work is (1) One year after successful completion of the work. (including Monsoon).None
17177463100000NoneNoneELIGIBILITYTenderer must have liquid assets and /or availability of credit facilities of not less than Rs.49.54 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC as per bid document)None
17177463340000NoneNoneELIGIBILITYOnly Class-3 & above registered contractors are eligible to apply for this tenderNone
preQualCriterionListNone
technicalCriterionList
createdTsversioncreatedDatemodifiedDatedescriptioncriterionCategoryTextcriterionTypeOthersValuetenderTechnicalCriterionDocumentList
NoneNoneNoneNoneList of existing commitments and ongoing worksNoneNone
NoneNoneNoneNoneList of works for which tenders already submittedNoneNone
NoneNoneNoneNoneBanker Details for referenceNoneNone
NoneNoneNoneNoneConstruction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awardedNoneNone
NoneNoneNoneNoneReports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five yearsNoneNone
NoneNoneNoneNoneQualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awardedNoneNone
NoneNoneNoneNoneList of Financial Resources with CertificatesNoneNone
NoneNoneNoneNoneContractor should upload contract registration copy enrolled in PWD-Class 3/above registration copyPast ExperienceNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNonePWD Registration Certificate (Class I/II/III/IV)
NoneNoneNoneNonePostal Address with contact numberPast ExperienceNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Postal Address with contact number
NoneNoneNoneNoneSatisfactorily completed similar nature of work at least 50 Percentage of the contract value, as prime contractor, at least one similar work such as Building work of value not less than Rs.90.82 lakhs usually not less than 50 Percentage estimated value of contract -2019-20 to 2023-24Capabilities of VendorNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneWork Done Certificate
NoneNoneNoneNoneTenderer must have completed physical work done as perscribed in bid document KW-4 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ 1.Earthwork Eaxcavation/Subgrade/Embankment Cum 809.59 2.CC Pavement/PCC/RCC Cum 465.85 3.BBM/SSM/Solid block sqm/UCR Cum 273.73 4.TMT Steel reinforcement Tonne 26.34 5.Plastering Sqm 2847.94 6.Painting Sqm 2847.94 7.Flooring Sqm 884.18Capabilities of VendorNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Quantities
NoneNoneNoneNoneTo qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 363.28 Lakhs. with UDIN No. certified by Authourized charted Accountant. (turnover shall not be less than two times of amount put to tender)Financial StatusNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneAudited CA Certificate of Annual Turnover
NoneNoneNoneNoneTenderer must have liquid assets and /or availability of credit facilities of not less than Rs.49.54 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature.(LOC as per bid document)Financial StatusNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneLine of Credit
NoneNoneNoneNoneBid capacityFinancial StatusNone
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- Bid capacity
NoneNoneNoneNonePAN & GST CertificateOthersPAN & GST Certificate
createdTsversioncreatedDatemodifiedDatedocumentName
NoneNoneNoneNoneOthers -- PAN & GST Certificate
tenderCriterionDocumentList
documentNameoptionaldocumentTypeText
Contractor should upload contract registration copy enrolled in PWD-Class 3/above registration copyTrueTechnical Bid
PAN & GST CertificateTrueTechnical Bid
Satisfactorily completed similar nature of work at least 50 Percentage of the contract value, as prime contractor, at least one similar work such as Building work of value not less than Rs.90.82 lakhs usually not less than 50 Percentage estimated value of contract -2019-20 to 2023-24TrueTechnical Bid
Tenderer must have completed physical work done as perscribed in bid document KW-4 Executed in any year the following 80 Percentage quantities of work during last 5 years i.e. 2019-20 to 2023-24 provided in BOQ 1.Earthwork Eaxcavation/Subgrade/Embankment Cum 809.59 2.CC Pavement/PCC/RCC Cum 465.85 3.BBM/SSM/Solid block sqm/UCR Cum 273.73 4.TMT Steel reinforcement Tonne 26.34 5.Plastering Sqm 2847.94 6.Painting Sqm 2847.94 7.Flooring Sqm 884.18TrueTechnical Bid
To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 363.28 Lakhs. with UDIN No. certified by Authourized charted Accountant.-turnover shall not be less than two times of amount put to tenderTrueTechnical Bid
Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.49.54 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature.-LOC as per bid documentTrueTechnical Bid
Bid capacityTrueTechnical Bid
Postal Address with contact numberTrueTechnical Bid
tenderWorkLocationList
tenderAddress
createdTs1718198574000
version0
createdDateNone
modifiedDateNone
blockNumberEE PRE Division, Old Zilla Panchayat, Vidhya nagar, Haveri
streetNone
cityHaveri
stateKarnataka
pin581110
tenderRecallDTONone