createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1717999499226 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 349550.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 21-06-2024 16:01:50 tenderQueryClose 20-06-2024 16:00:46 technicalBidOpen 22-06-2024 16:04:52 publishedDate 12-06-2024 11:31:37 publishedByPost PWD_EE_DIV_BID publishedByUser KPE14569 - SHIVSHANKER V KAMSHETTY bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 19-06-2024 11:41:19 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Shivshanker kamshetty splitEmdRequiredYn True emdBankGuarantee 249550.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08482226440 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1717999499262 version 4 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT10676 title PROPOSED CONSTRUCTION OF 6 BEDED PRIMARY HEALTH CENTER (OPEN COURT YARD TYPE) AT KITTA VILLAGE, BASAVAKALYNA TALUK, BIDAR DISTRICT, (UNDER KKRDB MACRO FOR THE YEAR 2023- 24) description PROPOSED CONSTRUCTION OF 6 BEDED PRIMARY HEALTH CENTER (OPEN COURT YARD TYPE) AT KITTA VILLAGE, BASAVAKALYNA TALUK, BIDAR DISTRICT, (UNDER KKRDB MACRO FOR THE YEAR 2023- 24) category WORKS categoryText Works ecv 23303308.47 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1692 locationName PWD Division Office Bidar provisionalAmount 27500000.0 groupOverheadTotal 0.0 fileNumber PWD/BK/KKRDB/PHC/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1717999499000 0 None None Buildings Dismentling 194856.35 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254141 112734 None Vol2 Item No.19.1 P.No.187 Demolishing lime concrete manually/ by mechanical means and disposal of material to the appropriate disposal area as per direction of Engineerin-charge Cum 612.15 612.15 61.56 False None None False None False 37683.954 0 3254142 112734 None Vol2 Item No.19.9.1 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin-charge.In lime mortar Cum 831.6 831.6 189.0 False None None False None False 157172.4 0 1717999499000 0 None None Buildings Primary Health Center 17457946.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254143 112735 None DSR 2021-22 Vol-3 Item No. 2.5APg.No 7 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 165946.2 165946.2 0.1 False None None False None False 16594.62 0 3254144 112735 None DSR 2023-24 Vol-1 Item No.1.12 Ground undulation levelling Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 99.75 99.75 483.72 False None None False None False 48251.07 0 3254145 112735 None DSR 2023-24 Vol-1 Item No. 1.14.1 Earth work excavation Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 341.94 False None None False None False 36621.774 0 3254146 112735 None Si No 2.1.2,Vol 1, Page No15, PWD CSR Vol 1 PCC Work "Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances requiredcomplete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates" Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 41.17 False None None False None False 244846.224 0 3254147 112735 None DSR 2023-24 Vol-2 I.No.5.3 P.No.9 RR Masonary Work - below ground "Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)" Cum 6515.25 6515.25 41.8 False None None False None False 272337.45 0 3254148 112735 None DSR 2023-24 Vol-2 I.No.5.4 P.No.9 Basement Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 34.88 False None None False None False 233990.736 0 3254149 112735 None DSR 2023-24 Vol-1 Item No. 1.9 Pg.No 7 Re-filling Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 279.3 279.3 157.02 False None None False None False 43855.686 0 3254150 112735 None DSR 2023-24 Vol-1 Item No. 1.11Pg.No 7 Re filling - New Soil Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Including cost of all labour complete as per specifications. Cum 454.65 454.65 1463.2 False None None False None False 665243.88 0 3254151 112735 None DSR 2023-24 Vol-1 Item No.2.2.3 M-25 grade Concrete - Columns to till Pintch beam Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 108.86 False None None False None False 724223.808 0 3254152 112735 None DSR 2023-24 Vol-1 Item No.2.2.3 Centering for Footing Providing Centering and Shuttering for Footing Cum 532.22 532.22 108.86 False None None False None False 57937.4692 0 3254153 112735 None DSR 2023-24 Vol-1 Item No.2.4.3 M-25 grade Concrete - Columns to till Plinth beam "Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" Cum 6652.8 6652.8 46.95 False None None False None False 312348.96 0 3254154 112735 None DSR 2023-24 Vol-1 Item No.2.4.3 Centering for COLUMN Providing Centering and Shuttering for Column Cum 4656.96 4656.96 8.69 False None None False None False 40468.9824 0 3254155 112735 None DSR 2023-24 Vol-1 Item No.2.4.3 Centering for PLINTH BEAM Providing Centering and Shuttering for Plinth Beam Cum 3326.4 3326.4 38.26 False None None False None False 127268.064 0 3254156 112735 None DSR 2023-24 Vol-1 Item No2.5.2 M-25 grade Concrete - Columns above Pinth beam Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 212.28 False None None False None False 1525263.642 0 3254157 112735 None DSR 2023-24 Vol-1 Item No2.5.2 Centering for COLUMN Providing Centering and Shuttering for Column Cum 4656.96 4656.96 27.04 False None None False None False 125924.1984 0 3254158 112735 None Item No 1 Centering for Lintel and Roof BEAM Providing Centering and Shuttering for Lintel and Roof Beam Cum 3991.68 3991.68 61.08 False None None False None False 243811.8144 0 3254159 112735 None Item No 1 Centering for Chajja Providing Centering and Shuttering for Chajja Cum 2993.76 2993.76 4.48 False None None False None False 13412.0448 0 3254160 112735 None Item No 1 Centering for Roof Roof Slab Providing Centering and Shuttering for Roof Slab Cum 3326.4 3326.4 119.69 False None None False None False 398136.816 0 3254161 112735 None DSR 2023-24 Vol-1 Item No.2.11aPg.No18 TMT Bars "Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification" Tonne 93929.85 93929.85 36.12 False None None False None False 3392746.182 0 3254162 112735 None DSR 2023-24 Vol-1 Item No.2.1.4 Pg.No15 Flooring Bed "Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates " Cum 6527.85 6527.85 66.96 False None None False None False 437104.836 0 3254163 112735 None DSR 2023-24 Vol-2 Item No.6.8 Pg.No 14 Brick Work "Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work" Cum 8367.45 8367.45 193.82 False None None False None False 1621779.159 0 3254164 112735 None DSR 2023-24 Vol-2 Item No.6.15 Pg.No 14 Brick Work "Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work." Sqm 1084.65 1084.65 261.61 False None None False None False 283755.2865 0 3254165 112735 None DSR 2023-24 Vol-2 Item No.12.13.1 Pg.No.100 DOOR FRAME "Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials, labour, usage charges complete as per specifications" Cum 103755.75 103755.75 1.63 False None None False None False 169121.8725 0 3254166 112735 None Item No 1 WPC DOOR FRAME "Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)" Size 62 x 100mm Mtr 737.1 737.1 89.1 False None None False None False 65675.61 0 3254167 112735 None DSR 2023-24 Vol-2 Item No.11.34B Pg.No 86 MS GRILL "Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc" Kgs 192.15 192.15 1037.14 False None None False None False 199286.451 0 3254168 112735 None DSR 2023-24 Vol-2 Item No.12.57.2 Pg.No.105 DOOR SHUTTERS "Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification 30 mm thick one side teak and one side commercial" Sqm 3667.65 3667.65 69.12 False None None False None False 253507.968 0 3254169 112735 None DSR 2023-24 Vol-2 Item No.12.90 Pg.No.111 DOOR SHUTTERS Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of ClassA category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness Sqm 3659.25 3659.25 28.35 False None None False None False 103739.7375 0 3254170 112735 None DSR 2023-24 Vol-2 Item No.12.94.1 Pg.No.110 Upvc SHUTTERS Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 7070.7 7070.7 45.0 False None None False None False 318181.5 0 3254171 112735 None DSR 2023-24 Vol-2 Item No.12.85 Pg.No.109 Upvc Ventilators "Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 6004.95 6004.95 4.39 False None None False None False 26361.7305 0 3254172 112735 None DSR 2023-24 Vol-1 Item No.12.51 Pg.No 105 Fixing of Door Frame Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 27.0 False None None False None False 28803.6 0 3254173 112735 None DSR 2023-24 Vol-2 Item No.8.1.1 Pg.No 41 Plastering Ceiling Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 693.5 False None None False None False 185684.625 0 3254174 112735 None DSR 2023-24 Vol-2 Item No.8.1.1 Pg.No 41 Inner Plastering Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 1904.13 False None None False None False 509830.8075 0 3254175 112735 None DSR 2023-24 Vol-2 Si No.8.5.2 Pg.No 42 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 366.45 366.45 757.24 False None None False None False 277490.598 0 3254176 112735 None DSR 2023-24 Vol-2 Item No.8.12 Pg.No 43 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge" Sqm 67.2 67.2 757.24 False None None False None False 50886.528 0 3254177 112735 None DSR 2023-24 Vol-2 Item No.8. 16.1 Pg.No 43 Plaster Mesh "Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment" Mtr 35.7 35.7 100.0 False None None False None False 3570.0 0 3254178 112735 None DSR 2023-24 Vol-2 Item No.8.51 Pg.No 50 White Putty Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer incharge. Sqm 105.0 105.0 1679.03 False None None False None False 176298.15 0 3254179 112735 None DSR 2023-24 Vol-2 Si No.9.17.2 Pg.No 61 VitrifiedTiles Tiles laying - Excluding bath room & Stair & Skirting Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of the tiles 600mm x 600mm Sqm 1233.75 1233.75 359.28 False None None False None False 443261.7 0 3254180 112735 None DSR 2023-24 Vol-2 Si No.9.7.1 Pg.No 59 Antiskid Tiles "Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc tion of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile" Sqm 1308.3 1308.3 57.05 False None None False None False 74638.515 0 3254181 112735 None DSR 2023-24 Vol-2 Si No.9.7.2 Pg.No 60 Wall Cladding "Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc tion of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile" Sqm 1323.0 1323.0 918.6 False None None False None False 1215307.8 0 3254182 112735 None DSR 2023-24 Vol-2 Si No.9.25Pg.No 63 Pavers "Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge." Sqm 840.0 840.0 30.0 False None None False None False 25200.0 0 3254183 112735 None DSR 2023-24 Vol-2 Si No.9.24 Pg.No 63 Granite Flooring "Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent" Sqm 2994.6 2994.6 377.14 False None None False None False 1129383.444 0 3254184 112735 None DSR 2023-24 Vol-2 Si No.10.2 Pg.No 69 Moulding Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 344.4 344.4 96.47 False None None False None False 33224.268 0 3254185 112735 None DSR 2023-24 Vol-2 Si No.11.28 Pg.No.85 SS Railing "Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge" Sqm 593.25 593.25 361.8 False None None False None False 214637.85 0 3254186 112735 None DSR 2023-24 Vol-2 Si No.8.32 Pg.No 46 Painting work "Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 163.8 163.8 1679.03 False None None False None False 275025.114 0 3254187 112735 None DSR 2023-24 Vol-2 Si No.8.30 Pg.No.46 External Painting Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 182.7 182.7 757.24 False None None False None False 138347.748 0 3254188 112735 None DSR 2023-24 Vol-2 Si No.8.33.3 Pg.No.47 Metal Painting "Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 145.95 145.95 49.39 False None None False None False 7208.4705 0 3254189 112735 None DSR 2023-24 Vol-2 Si No.8.33.2 Pg.No.46 Door Painting "Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 144.9 144.9 93.58 False None None False None False 13559.742 0 3254190 112735 None DSR 2023-24 Vol-2 Si No.13.48 Pg.No.125 Rain Water pipe "Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter" Rmtr 305.55 305.55 36.8 False None None False None False 11244.24 0 3254191 112735 None DSR 2023-24 Vol-2 Si No.7.38 Pg.No 26 Head Room sheet "Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required" Sqm 596.4 596.4 26.82 False None None False None False 15995.448 0 3254192 112735 None DSR 2023-24 SRP- Vol-2Item No.11.6.1 Rolling Shutter - Entrance - MD Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation com plete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2764.65 2764.65 16.0 False None None False None False 44234.4 0 3254193 112735 None DSR 2023-24 Vol-2 Item No 11.7 Pg. No.76 Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. No 423.15 423.15 1.0 False None None False None False 423.15 0 3254194 112735 None DSR 2023-24 Vol-2 Item No. 7.32.3 Page no.25 False Ceiling - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 1203.3 1203.3 272.36 False None None False None False 327730.788 0 3254195 112735 None DSR 2023-24 Vol-2 Item No.18.2 157 Open Joint - Fabrication works Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory/ work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. Each 2819.25 2819.25 36.0 False None None False None False 101493.0 0 3254196 112735 None DSR 2018-19 Item No. XV 3880178 Aluminium handles powder coated 150 mm Each 53.39 53.39 150.0 False None None False None False 8008.5 0 3254197 112735 None DSR 2018-19 Item No. XV391 0189 M.S.Hold fast 150 mm Each 33.81 33.81 120.0 False None None False None False 4057.2 0 3254198 112735 None DSR 2018-19 Item No. XV3920220 Locking arrangements Each 578.39 578.39 230.0 False None None False None False 133029.7 0 3254199 112735 None DSR 2018-19 Item No. XV3900188 Heavy duty hinges Each 32.93 32.93 230.0 False None None False None False 7573.9 0 1717999499000 0 None None Buildings Doctors & Nurses Quarters 2189784.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254200 112736 None DSR 2023-24 Vol-3 Item No. 2.5APg.No 7 Uprouting of the trees and entire Built up area Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ha 165946.2 165946.2 0.02 False None None False None False 3318.924 0 3254201 112736 None DSR 2023-24 Vol-1 Item No.1.12 Ground undulation levelling Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 99.75 99.75 84.0 False None None False None False 8379.0 0 3254202 112736 None DSR 2023-24 Vol-1 Item No. 1.14.1 Earth work excavation Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 67.56 False None None False None False 7235.676 0 3254203 112736 None Si No 2.1.2,Vol 1, Page No15, PWD CSR Vol 1 PCC Work Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances requiredcomplete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 8.79 False None None False None False 52275.888 0 3254204 112736 None DSR 2023-24 Vol-2 I.No.5.3 P.No.9 RR Masonary Work Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6515.25 6515.25 11.64 False None None False None False 75837.51 0 3254205 112736 None DSR 2023-24 Vol-2 I.No.5.4 P.No.9 Basement Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 6.94 False None None False None False 46556.643 0 3254206 112736 None DSR 2023-24 Vol-1 Item No. 1.11Pg.No 7 Re filling - New Soil Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Including cost of all labour complete as per specifications. Cum 454.65 454.65 43.44 False None None False None False 19749.996 0 3254207 112736 None DSR 2023-24 Vol-1 Item No.2.2.3 M-25 grade Concrete - Columns to till Pintch beam Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 9.07 False None None False None False 60340.896 0 3254208 112736 None DSR 2023-24 Vol-1 Item No.2.2.3 Centering for Footing Providing Centering and Shuttering for Footing Cum 532.22 532.22 9.07 False None None False None False 4827.2354 0 3254209 112736 None DSR 2023-24 Vol-1 Item No.2.4.3 M-25 grade Concrete - Columns to till Plinth beam Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 6.49 False None None False None False 43176.672 0 3254210 112736 None Item No 1 Centering for COLUMN Providing Centering and Shuttering for Column Cum 4656.96 4656.96 1.59 False None None False None False 7404.5664 0 3254211 112736 None Item No 1 Centering for PLINTH BEAM Providing Centering and Shuttering for Plinth Beam Cum 3326.4 3326.4 4.9 False None None False None False 16299.36 0 3254212 112736 None DSR 2023-24 Vol-1 Item No2.5.2 M-25 grade Concrete - Columns above Pinth beam Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 23.69 False None None False None False 170216.2035 0 3254213 112736 None Item No 1 Centering for COLUMN Providing Centering and Shuttering for Column Cum 4656.96 4656.96 4.21 False None None False None False 19605.8016 0 3254214 112736 None Item No 1 Centering for Lintel and Roof BEAM Providing Centering and Shuttering for Lintel and Roof Beam Cum 3991.68 3991.68 6.87 False None None False None False 27422.8416 0 3254215 112736 None Item No 1 Centering for Chajja Providing Centering and Shuttering for Chajja Cum 2993.76 2993.76 0.41 False None None False None False 1227.4416 0 3254216 112736 None Item No 1 Centering for Roof Roof Slab Providing Centering and Shuttering for Roof Slab Cum 3326.4 3326.4 12.21 False None None False None False 40615.344 0 3254217 112736 None DSR 2023-24 Vol-1 Item No.2.11aPg.No18 TMT Bars "Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification" Tonne 93929.85 93929.85 3.7 False None None False None False 347540.445 0 3254218 112736 None DSR 2023-24 Vol-1 Item No.2.1.4 Pg.No15 Flooring Bed "Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates " Cum 6527.85 6527.85 6.67 False None None False None False 43540.7595 0 3254219 112736 None DSR 2023-24 Vol-2 Item No.6.8 Pg.No 14 Brick Work "Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work" 4 Mtrs 8367.45 8367.45 42.09 False None None False None False 352185.9705 0 3254220 112736 None DSR 2023-24 Vol-2 Item No.12.13.1 Pg.No.100 DOOR FRAME "Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials, labour, usage charges complete as per specifications" Cum 103755.75 103755.75 0.31 False None None False None False 32164.2825 0 3254221 112736 None Item No 1 WPC DOOR FRAME "Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)" Size 62 x 100mm Mtr 737.1 737.1 14.85 False None None False None False 10945.935 0 3254222 112736 None DSR 2023-24 Vol-2 Item No.11.34B Pg.No 86 MS GRILL "Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc" Sqm 192.15 192.15 253.26 False None None False None False 48663.909 0 3254223 112736 None DSR 2023-24 Vol-2 Item No.12.57.2 Pg.No.105 DOOR SHUTTERS "Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification 30 mm thick one side teak and one side commercial" Sqm 3667.65 3667.65 10.5 False None None False None False 38510.325 0 3254224 112736 None DSR 2023-24 Vol-2 Item No.12.90 Pg.No.111 DOOR SHUTTERS Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of ClassA category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness Sqm 3659.25 3659.25 4.73 False None None False None False 17308.2525 0 3254225 112736 None DSR 2023-24 Vol-2 Item No.12.94.1 Pg.No.110 Upvc SHUTTERS Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)" Sqm 7070.7 7070.7 11.52 False None None False None False 81454.464 0 3254226 112736 None DSR 2023-24 Vol-2 Item No.12.85 Pg.No.109 Upvc Ventilators "Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 6004.95 6004.95 0.54 False None None False None False 3242.673 0 3254227 112736 None DSR 2023-24 Vol-1 Item No.12.51 Pg.No 105 Fixing of Door Frame Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 5.0 False None None False None False 5334.0 0 3254228 112736 None DSR 2023-24 Vol-2 Item No.8.1.1 Pg.No 41 Plastering Ceiling Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 66.68 False None None False None False 17853.57 0 3254229 112736 None DSR 2023-24 Vol-2 Item No.8.1.1 Pg.No 41 Inner Plastering Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 243.49 False None None False None False 65194.4475 0 3254230 112736 None DSR 2023-24 Vol-2 Si No.8.9 Pg.No 42 Outer Plaster Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Cum 404.25 404.25 202.1 False None None False None False 81698.925 0 3254231 112736 None DSR 2023-24 Vol-2 Item No.8.12 Pg.No 43 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in-Charge Sqm 67.2 67.2 202.1 False None None False None False 13581.12 0 3254232 112736 None DSR 2023-24 Vol-2 Item No.8. 16.1 Pg.No 43 Plaster Mesh "Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment" Mtr 35.75 35.75 100.0 False None None False None False 3575.0 0 3254233 112736 None DSR 2023-24 Vol-2 Item No.8.51 Pg.No 50 White Putty Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer incharge. Sqm 105.0 105.0 310.17 False None None False None False 32567.85 0 3254234 112736 None DSR 2023-24 Vol-2 Si No.9.17.2 Pg.No 61 VitrifiedTiles Tiles laying - Excluding bath room & Stair & Skirting Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Cum 1233.75 1233.75 62.48 False None None False None False 77084.7 0 3254235 112736 None DSR 2023-24 Vol-2 Si No.9.7.1 Pg.No 59 Antiskid Tiles "Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc tion of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile" Sqm 1308.3 1308.3 5.4 False None None False None False 7064.82 0 3254236 112736 None DSR 2023-24 Vol-2 Si No.9.7.2 Pg.No 60 Wall Cladding "Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc tion of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile" Sqm 1308.3 1308.3 24.0 False None None False None False 31399.2 0 3254237 112736 None DSR 2023-24 Vol-2 Si No.9.24 Pg.No 63 Granite Flooring "Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent" Sqm 2994.6 2994.6 24.14 False None None False None False 72289.644 0 3254238 112736 None DSR 2023-24 Vol-2 Si No.10.2 Pg.No 69 Moulding Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 344.4 344.4 96.47 False None None False None False 33224.268 0 3254239 112736 None DSR 2023-24 Vol-2 Si No.11.28 Pg.No.85 SS Railing "Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge" Sqm 593.25 593.25 98.28 False None None False None False 58304.61 0 3254240 112736 None DSR 2023-24 Vol-2 Si No.8.32 Pg.No 46 Painting work "Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 163.8 163.8 310.17 False None None False None False 50805.846 0 3254241 112736 None DSR 2023-24 Vol-2 Si No.8.30 Pg.No.46 External Painting Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 182.7 182.7 202.1 False None None False None False 36923.67 0 3254242 112736 None DSR 2023-24 Vol-2 Si No.8.33.3 Pg.No.47 Metal Painting "Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 145.95 145.95 12.33 False None None False None False 1799.5635 0 3254243 112736 None DSR 2023-24 Vol-2 Si No.8.33.2 Pg.No.46 Door Painting "Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge." Sqm 144.9 144.9 14.56 False None None False None False 2109.744 0 3254244 112736 None DSR 2023-24 Vol-2 Si No.13.48 Pg.No.125 Rain Water pipe "Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter" Rmtr 305.55 305.55 15.0 False None None False None False 4583.25 0 3254245 112736 None DSR 2023-24 Vol-2 Si No.7.38 Pg.No 26 Head Room sheet "Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required" Sqm 596.4 596.4 16.56 False None None False None False 9876.384 0 3254246 112736 None DSR 2018-19 Item No. XV3880178 Aluminium handles powder coated 150 mm Each 53.39 53.39 20.0 False None None False None False 1067.8 0 3254247 112736 None DSR 2018-19 Item No. XV3910189 M.S.Hold fast 150 mm Each 33.81 33.81 15.0 False None None False None False 507.15 0 3254248 112736 None DSR 2018-19 Item No. XV3920220 Locking arrangements Each 578.39 578.39 5.0 False None None False None False 2891.95 0 1717999499000 0 None None Buildings Water supply & Sanitary works(PHC) 651109.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254249 112737 None KBS 11 it no12.5 p no 79 Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. No 4956.0 4956.0 7.0 False None None False None False 34692.0 0 3254250 112737 None KBS 11 it no12.1 p no 79 Providing and fixing white vitreous china clay, water closet Indian type ( Squatting pan ) of size 580mm with footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. No 3506.0 3506.0 6.0 False None None False None False 21036.0 0 3254251 112737 None DSR 2023-24 I.No.14.7A P.No.133 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer" a)Wash basin- C02551C b) CP Waste coupling- T9911A1 c) CP Bottle trap T3201A1 d) Pillar cock G0202A1 e) Angle valve T9939A1 f)450mm long heavy duty CP inlet connecting pipe T991299 Supplying & Installation No 4121.0 4121.0 10.0 False None None False None False 41210.0 0 3254252 112737 None KBS 11 it no 12.34 35 p no 84 Providing and fixing laboratory sink of white glazed fire clay of size 450x300x150mm with M.S / C.I brackets, C.P brass chain with rubber plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications Each 3260.0 3260.0 3.0 False None None False None False 9780.0 0 3254253 112737 None specifications.it no 12.46 p no 85 Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per Unit 697.0 697.0 10.0 False None None False None False 6970.0 0 3254254 112737 None i.no 12.41 p no-84 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete No 1220.0 1220.0 10.0 False None None False None False 12200.0 0 3254255 112737 None Item Code 1 Providing & fixing CP Health faucet with flexible hose, CP 2 Way Bib cock, wall flange supporting hook with screws fixing materials & sealant to all sides of wall flange etc., complete. ( Rate Analysis) a)2WAY BIB COCK (CON-CHR-041KN) b) CP health faucet (ALD-CHR-583) Supplying & Installation No 2440.0 2440.0 7.0 False None None False None False 17080.0 0 3254256 112737 None Item Code 1 INTERNAL & EXTERNAL SEWAGE SYSTEM Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No. a) 75mm dia Mtr 425.0 425.0 80.0 False None None False None False 34000.0 0 3254257 112737 None Item Code1 b) 110mm dia Mtr 595.0 595.0 150.0 False None None False None False 89250.0 0 3254258 112737 None Item Code 1 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). 10 x 75 cm Each 250.0 250.0 20.0 False None None False None False 5000.0 0 3254259 112737 None Item No 13.86.2 WATER SUPPLY SYSTEM 13.86 Providing and fixing Chlorinated Poli Vinyl Chloride (CPVC) pipes conforming to IS 15778 having terminal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this including fixing the pipe with clamp at 1.00mtrs spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. (Internal)(Concealed work including cutting chasses & good the wall Etc) a) 20 mm dia - Rmtr 235.0 235.0 200.0 False None None False None False 47000.0 0 3254260 112737 None Item No 13.87.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).(P.No.99/I.No.13.86 - 40mm nominal OD pipes a) 25 mm dia - Rmtr 179.0 179.0 180.0 False None None False None False 32220.0 0 3254261 112737 None Item No 13.87.5 b) 40 mm dia - Rmtr 292.0 292.0 150.0 False None None False None False 43800.0 0 3254262 112737 None Item No 13-34 Providing and fixing in position brass gate valve with CI wheel of approved quality (screwed end) 32,25, &20 mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per the direction of Engineer-in-charge of work. c) 25mm dia (Screwed ends) No 449.0 449.0 5.0 False None None False None False 2245.0 0 3254263 112737 None Item No 13-33 d) 20mm dia (Screwed ends) No 336.0 336.0 5.0 False None None False None False 1680.0 0 3254264 112737 None P.No.97 I.No.13.78 Providing and placing on terrace, Polyethylene water Storage tanks with manhole lid and suitable locking arrangements,making holes of suitable diameter for inlet, outlet and overflow pipes including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.22 (FOR 1000LTR CAPACITY) 1000 litre No 9.0 9.0 4000.0 False None None False None False 36000.0 0 3254265 112737 None No.KBS 2.1(a) 2.3.5 (P. No.6 I.No. 2.3 Earthwork excavation all type of soil, for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m.and above in width, in ordinary soil including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation after breaking of clods including cost & conveyance of all materials, cost of labour & equipment, with all lead and lift,loading & unloading & all other incidental charges required for successful completion of work as per specification, designs, drawings, etc., complete and directions of the Engineer in-charge of the work and complete as per specifications. Depth upto 2.0 M. a) Ordinary soil Cum 299.0 299.0 50.0 False None None False None False 14950.0 0 3254266 112737 None P. No.90 I.No. 12.112.2 Providing stoneware gully trap of approved quality and make and fixing in CC 1:2:4 and plastering with CM 1:3 wherever necessary (rate including cost of all materials fixtures and lead) of size 15cm X 10cm including cost of all materials, labour, equipment, loading and unloading, leads and lifts and all other incidental charges etc., complete as per the directions of Engineer-incharge of work.) (15 x 10 cm) No 280.0 280.0 10.0 False None None False None False 2800.0 0 3254267 112737 None P. No.76 I.No. 11.50.3 Constructing brick masonary inspection chamber 450x450mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in CM 1:5, C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg), foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges,curing complete as per specifications & direction of Engineer-in-charge of work. (including CI cover with frame) a) 450mm x 450mm (heavy duty frame) No 5300.0 5300.0 4.0 False None None False None False 21200.0 0 3254268 112737 None I-11.50.2 p no75 KSRB 12-8.1 : Constructing brick masonry inspection chamber 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications etc., complete as per directions of the Engineer-in-charge No 8490.0 8490.0 4.0 False None None False None False 33960.0 0 3254269 112737 None no 13.70.7 p no96 Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 160mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection - etc.,complete with all lead & lift and as per the instructions and directions of the Engineer-In-Charge of the work.it m 627.0 627.0 110.0 False None None False None False 68970.0 0 3254270 112737 None no 13.70.5 p no96 Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection - etc.,complete with all lead & lift and as per the instructions and directions of the Engineer-In-Charge of the work.it m 450.0 450.0 100.0 False None None False None False 45000.0 0 3254271 112737 None No.KBS 13.2.10 13.13 (P.No. 95 I.No. 13.59 Providing and fixing in position 25mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification a)25mm dia No 475.0 475.0 5.0 False None None False None False 2375.0 0 3254272 112737 None No.KBS 13.2.2 13.3 it no 13.25 p no 93 KSRB13-6.1-3 : Providing and fixing in position brass bib cock of approved quality 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification a)25mm dia No 236.0 236.0 45.0 False None None False None False 10620.0 0 3254273 112737 None No.KBS (P.No. 92 I.No. 13.42 Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification a)25mm dia No 513.0 513.0 10.0 False None None False None False 5130.0 0 3254274 112737 None no 2 (1 0.75) p no XLV Providing and fixing submercible pump of capacity 1 HP of approved make including cost of fixing wiring with motor starter No 8941.0 8941.0 1.0 False None None False None False 8941.0 0 3254275 112737 None Item No 1 Providing and fixing 7.5cm to 15cm dia N.P. grating including cost of all materials, labour, equipments, loading and uploading, leads and lifts and all other incidental charges etc., complete as per the directions of Engineer-incharge Each 150.0 150.0 20.0 False None None False None False 3000.0 0 1717999499000 0 None None Buildings Internal electrification(PHC) 616594.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254276 112738 None 2.2.1 Wiring System POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switch Point 160.0 160.0 22.0 False None None False None False 3520.0 0 3254277 112738 None 2.2.2 Medium point above 3 mts upto 6mts from tapping point to outlet via switch Point 250.0 250.0 80.0 False None None False None False 20000.0 0 3254278 112738 None 2.2.3 Long point above 6 mts upto 10 mts from tapping point to outlet via switch Point 375.0 375.0 40.0 False None None False None False 15000.0 0 3254279 112738 None 2.2.4 Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches Point 475.0 475.0 1.0 False None None False None False 475.0 0 3254280 112738 None 2.2.5 Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches Point 675.0 675.0 5.0 False None None False None False 3375.0 0 3254281 112738 None 3.4.1 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3 Module Each 95.0 95.0 55.0 False None None False None False 5225.0 0 3254282 112738 None 3.4.2 4 - 5 Module Each 105.0 105.0 20.0 False None None False None False 2100.0 0 3254283 112738 None 3.4.3 6 Module Each 125.0 125.0 20.0 False None None False None False 2500.0 0 3254284 112738 None 3.4.4 8 Module Each 145.0 145.0 15.0 False None None False None False 2175.0 0 3254285 112738 None 3.4.5 10 / 12 Module Each 165.0 165.0 10.0 False None None False None False 1650.0 0 3254286 112738 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 1 to 3 module Each 110.0 110.0 55.0 False None None False None False 6050.0 0 3254287 112738 None 3.5.3 4 module Each 125.0 125.0 20.0 False None None False None False 2500.0 0 3254288 112738 None 3.5.4 8 module Each 200.0 200.0 15.0 False None None False None False 3000.0 0 3254289 112738 None 3.5.4 8 module Each 200.0 200.0 15.0 False None None False None False 3000.0 0 3254290 112738 None 3.5.5 10 -12 module Each 230.0 230.0 20.0 False None None False None False 4600.0 0 3254291 112738 None 3.6.1 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate 6 amps one way switch Each 70.0 70.0 160.0 False None None False None False 11200.0 0 3254292 112738 None 3.6.2 6 amps two way switch Each 95.0 95.0 1.0 False None None False None False 95.0 0 3254293 112738 None 3.6.3 6 Amps 3 way sockets Each 105.0 105.0 32.0 False None None False None False 3360.0 0 3254294 112738 None 3.6.4 stepped fan Regulator's Each 290.0 290.0 20.0 False None None False None False 5800.0 0 3254295 112738 None 3.8.6 16A one way switch Each 115.0 115.0 18.0 False None None False None False 2070.0 0 3254296 112738 None 3.6.10 32 A DP switch Each 182.0 182.0 6.0 False None None False None False 1092.0 0 3254297 112738 None 3.6.11 6/16 Amps universal sockets Each 162.0 162.0 18.0 False None None False None False 2916.0 0 3254298 112738 None 3.6.12 Telephone socket Each 79.0 79.0 7.0 False None None False None False 553.0 0 3254299 112738 None 1.12 Supply and fixing one metal Fan box with round hook Each 85.0 85.0 20.0 False None None False None False 1700.0 0 3254300 112738 None 3.13.6 Supply and fixing of Metal Socket set of 20A,230V, 2pole & Earth Plug & Socket on a suitable MS box for incorporating SP/TP MCB( without MCB) ,complete with internal connections with all accessories complete. Each 240.0 240.0 4.0 False None None False None False 960.0 0 3254301 112738 None 1.2.1 Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary 20 mm dia Mtr 40.0 40.0 700.0 False None None False None False 28000.0 0 3254302 112738 None 1.2.2 25 mm dia Mtr 53.0 53.0 450.0 False None None False None False 23850.0 0 3254303 112738 None 1.2.4 40 mm dia 2.5mm thick Mtr 95.0 95.0 30.0 False None None False None False 2850.0 0 3254304 112738 None 1.3.1 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia Mtr 51.0 51.0 250.0 False None None False None False 12750.0 0 3254305 112738 None 1.3.2 25 mm dia Mtr 54.0 54.0 200.0 False None None False None False 10800.0 0 3254306 112738 None 1.3.4 40 mm dia 2.5mm thick Mtr 93.0 93.0 20.0 False None None False None False 1860.0 0 3254307 112738 None 2.3.2 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. 1.5 Sq.mm Mtr 20.5 20.5 1100.0 False None None False None False 22550.0 0 3254308 112738 None 2.3.3 2,5 sq.mm Mtr 32.0 32.0 650.0 False None None False None False 20800.0 0 3254309 112738 None 2.3.4 4 sq.mm Mtr 45.0 45.0 500.0 False None None False None False 22500.0 0 3254310 112738 None 2.3.5 6sq.mm Mtr 70.0 70.0 120.0 False None None False None False 8400.0 0 3254311 112738 None 5.18.10 Control System MCB DB Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser. 6 Way TP & N( LDB/PDB) Each 3330.0 3330.0 2.0 False None None False None False 6660.0 0 3254312 112738 None 5.18.9 4Way TPN( EMPNL) Each 2650.0 2650.0 1.0 False None None False None False 2650.0 0 3254313 112738 None 5.18.11 8Way SPN( EDB) Each 1450.0 1450.0 1.0 False None None False None False 1450.0 0 3254314 112738 None 5.17.1 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 Amps SP Each 434.0 434.0 44.0 False None None False None False 19096.0 0 3254315 112738 None 5.17.6 40 Amps TPN Each 2374.0 2374.0 6.0 False None None False None False 14244.0 0 3254316 112738 None 5.11.1 Supplying of on Load change Over Swich,4pole,AC-23A duty,415V,50Hz,ACsupply. up to 63 Amps Each 4300.0 4300.0 1.0 False None None False None False 4300.0 0 3254317 112738 None 5.11.2 100 Amps Each 5500.0 5500.0 1.0 False None None False None False 5500.0 0 3254318 112738 None 14.16.4 Fixing of -Amps TPST/change over switch/contactor along with neutral link with screws,bolts,nuts and wiring using required capacity wires and circuit labeling. 15-63 Amps TPDT/COS Each 250.0 250.0 1.0 False None None False None False 250.0 0 3254319 112738 None 14.16.5 100-250 Amps Each 410.0 410.0 1.0 False None None False None False 410.0 0 3254320 112738 None 5.42.2 S&F sheet Metal Box made out of 16swg sheet Metal with necessary Cable entry as reqd with Painting as reqd. Size 400x400x65 mm Sq CM 0.35 0.35 1600.0 False None None False None False 560.0 0 3254321 112738 None 5.17.6 Supplying and fixing 32A DP MCB miniature circuit breaker on the existing MCB distribution board (EMG PNL) using necessary fixing materials and wiring complete as required Each 1335.0 1335.0 1.0 False None None False None False 1335.0 0 3254322 112738 None 5.20.1 Supplying and fixing 25 A DP ELMCB miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required Each 2300.0 2300.0 3.0 False None None False None False 6900.0 0 3254323 112738 None 5.20.2 Supplying and fixing 40 A DP ELMCB miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required Each 2500.0 2500.0 3.0 False None None False None False 7500.0 0 3254324 112738 None 13.26.1 ELECTRICAL FIXTURES Supplying of box fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50HzAC power supply excluding Tube. 1 x 2' Tube light fitting Each 325.0 325.0 20.0 False None None False None False 6500.0 0 3254325 112738 None 13.26.1 1 x 4' Tube light fitting Each 450.0 450.0 30.0 False None None False None False 13500.0 0 3254326 112738 None 12.6.2 supply of 2'x2' LED recessed luminaire with 36Watts system wattage. Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester power coated. Driver operates with voltage range from 1OOV to 270V 50/60 Hz with short circuit, overload & mis-wiring protection. Lumen Maintenance of 70% at 50000 Hrs. Injection moulded poly carbonate diffuser for better mechanical stability, light transmission & avoid pot hole effect. Junction temperature shall be 70 degree Celsius. Driver is on constant current driver@ 0.06A with PF 0.92 with line voltage @ 220-240V @ 50/60Hz, driver efficiency 65% & THD15%. LED Efficiency 130 lm/W at 1W & Fixture Efficiency 751m/w with CRI 75 with injection moulded Polycarbonate lens with 80mm depth. 5 years Warranty against any manufacturing defect working under standard electrical condation Each 5200.0 5200.0 4.0 False None None False None False 20800.0 0 3254327 112738 None 12.5.3 Supply of LED Square Recessed/Surface Down lighter with 18W System Wattage. Housing shall be with powder coated pressure die cast aluminum alloy with corrosion resistant polyester powder coat & with extended heat sink. Diffuser/ cover made of Lexan plastic material. Rated life shall be L70 @ 50000 Hrs. which shall has inbuilt electrical protection@ 50000 Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, overload, open circuit & miswiring. Driver is on constant current driver output driver @ 0.06A with PF 0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficiency 85% & THD15%. LED Efficiency 130 lm/W at 1W & Fixture Efficiency 751m/w with CRI 75 with injection moulded Polycarbonate lens. 5 years Warranty against any manufacturing defect working under standard electrical condition Each 1150.0 1150.0 4.0 False None None False None False 4600.0 0 3254328 112738 None 12.5.2 Supply of recessed/surface mounted rolling type LED square or round Down light 12 watts with 4/6W GU 10 LED Lamp Rib Fabricated from Die cast aluminum with white powder coated prewired to mains connector with suitable driver & having swiveling unit of aluminum die cast eye ball & LED Lamp position retained by circular wire spring. 5 years Warranty against any manufacturing defect working under standard electrical condition. Each 768.0 768.0 20.0 False None None False None False 15360.0 0 3254329 112738 None 12.8 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source." Each 5480.0 5480.0 4.0 False None None False None False 21920.0 0 3254330 112738 None 7.1 Supplying of Exhaust Fan of 1440 RPM of 300mm (12") size with Bracket, blades complete for Light duty suitable to operate on 230V,50Hz, A.C.,supply Each 1200.0 1200.0 8.0 False None None False None False 9600.0 0 3254331 112738 None 7.3 Supplying capacitor type 48" sweep ceiling fan complete with down rod blades , shackle canopies etc suitable for operation on 230V 50 cycles single phase AC supply conforming to ISS - 374 - 1979 and with double ball bearing system [Khaitan, Crompton greaves, Usha] Each 2090.0 2090.0 20.0 False None None False None False 41800.0 0 3254332 112738 None 7.5.1 Supplying 300mm wall mounting fan suitable to operate at single phase 230v ac supply Each 2600.0 2600.0 1.0 False None None False None False 2600.0 0 3254333 112738 None 14.7 Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL fitting indoors on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires . Required nos of round blocks and clamps Each 110.0 110.0 70.0 False None None False None False 7700.0 0 3254334 112738 None 14.8 Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring complete Each 150.0 150.0 21.0 False None None False None False 3150.0 0 3254335 112738 None 14.12 Fixing one exhaust fan in the nitch already left in the wall with bolts & nuts and a 5 Amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make with wire mesh and any frame if required Each 400.0 400.0 8.0 False None None False None False 3200.0 0 3254336 112738 None 14.1.2 Supplying and fixing 32 mm dia class A GI pipe bracket up to 2 mts long bent at suitable angle and fixing to this bracket 70 W MH street light fitting on wall using suitable clamps, bolts and nuts and wiring using suitable capacities of wires complete Each 835.0 835.0 6.0 False None None False None False 5010.0 0 3254337 112738 None 6.4.7 CABLES "Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms(Max) as per IS-3975" 3.5 core 50sqmm Mtr 300.0 300.0 100.0 False None None False None False 30000.0 0 3254338 112738 None 6.5.2 Labour charges for laying of 25 Sqmm to 75 Sqmm 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/ on wall/ on pole as required.when supplied agency in existing trench / on wall as required Mtr 15.5 15.5 100.0 False None None False None False 1550.0 0 3254339 112738 None 6.11.4 Supplying and fixing of 45 mm dia heavy duty cable glands suitable or UG cable of 1.1 KV class metal only Each 194.0 194.0 4.0 False None None False None False 776.0 0 3254340 112738 None 6.6.1 Digging of Trench of 0.6M deep x 0.5M wide, refilling the Trench to reqd ground level & consolidating etc in soil (Ordinary) Mtr 76.0 76.0 80.0 False None None False None False 6080.0 0 3254341 112738 None 6.9.3 Supplying and fixing of 65 mm DIA Class A GI Pipe of wall thickness not less than 3.25mm suitable or UG cable of 1.1 KV class Mtr 566.0 566.0 4.0 False None None False None False 2264.0 0 3254342 112738 None 6.10.5 Supplying and fixing of 50Sqmm L.T.cast iron pot heads suitable for 1.1kv class UG cable filled with necessary bitumen/insulting compound complete with terminals ,clamps,bolts,nuts and washers etc. Each 618.0 618.0 2.0 False None None False None False 1236.0 0 3254343 112738 None 6.1 Supplying , fixing , wiring earth electrode using 40 mm dia 2.9 mm thick GI pipe 2.5 mt long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150 mm alround the pipe to complete depth .The connection from the pipe is to be established through GI wire of size as ISI specifications 7.3.3. of IS732 using 12mm dia bolts nuts washers and check nuts etc;the pipe shall have 16 through holes of 12mm dia Each 2999.7 2999.7 6.0 False None None False None False 17998.2 0 3254344 112738 None 6.18.3 Supplying and running of Gi wire of size 8 SWG for grounding connections using necessary fixing materials as required. Rmtr 19.0 19.0 40.0 False None None False None False 760.0 0 3254345 112738 None 6.3.1 Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required Rmtr 75.0 75.0 50.0 False None None False None False 3750.0 0 3254346 112738 None 9.2.2 Supplying and drawing PVC flexible Two pair telephone unarmoured tinned copper cable of approved make Rmtr 14.5 14.5 70.0 False None None False None False 1015.0 0 3254347 112738 None Market Rate Supplying and Fixing 10 pair telephone Junction Box Each 500.0 500.0 1.0 False None None False None False 500.0 0 3254348 112738 None 1.4.4 Supplying and fixing sheet metal box of size 180x90x65 mm made out of 18 SWG sheet metal with necessary holes for cable / conduit entry as required with one coat of primer of approved make Each 102.0 102.0 2.0 False None None False None False 204.0 0 3254349 112738 None 5.42.2 fabricatingg,supplying & mounting MS box made out of 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, providing with hinged front cover, equipped with tamperproof locking arrangement, with suitable clamps with necessary cable entry pipe with Gland Box, hold be finished with2 coats of red oxide & finally finished with approved colour enamelled paint etc complete. Sq CM 0.35 0.35 55000.0 False None None False None False 19250.0 0 3254350 112738 None 5.40.1 Supplying 100 A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic/FRP/DMC insulators which are mounted on powder coated 40x6mm MS flat frame work in existing Panel Board. The Bus bars shall have suitable holes for termination of Incoming & outgoing cables as per IS specification with necessary bolts, nuts & washers etc complete Rmtr 2050.0 2050.0 1.0 False None None False None False 2050.0 0 3254351 112738 None 6.39 Supplying & fixing angle iron frame work fabricated out of MS angle iron & MS flat with bolts,nuts,washers etc & painted with 2 coats of red oxide Paint& the 2 coats of approved paint 40x40x6 mm Rmtr 263.0 263.0 2.0 False None None False None False 526.0 0 3254352 112738 None 6.39.4 50x100x50x6mm C Channel Rmtr 648.0 648.0 2.0 False None None False None False 1296.0 0 3254353 112738 None 5.14.7 Supplying& fixing MCCBs over the existing Panel Board with bolts,nuts,wiring etc complete. Protection of Overload & Short circuit with Thermal magnetic/Micro-processor releases etc as per IS:13947 100A ,4Pole,25KA Each 6400.0 6400.0 1.0 False None None False None False 6400.0 0 3254354 112738 None 5.17.8 Supplying and fixing -A MCB miniature circuit breaker on the existing MCB distribution board ( Main / EMGPNL)using necessary fixing materials and wiring complete as required 40A TPN MCB Each 2374.0 2374.0 4.0 False None None False None False 9496.0 0 3254355 112738 None 5.17.6 63A DP MCB Each 1355.0 1355.0 1.0 False None None False None False 1355.0 0 3254356 112738 None 5.29 S,F& wiring 3 Phase Digital Ammeter/ Each 1185.0 1185.0 1.0 False None None False None False 1185.0 0 3254357 112738 None 5.29 S,F& wiring 3 Phase Digital Voltmeter Each 1185.0 1185.0 1.0 False None None False None False 1185.0 0 3254358 112738 None 5.38 S,F & wiring LED Type Panel Board indicating lamps with reqd color Each 430.0 430.0 3.0 False None None False None False 1290.0 0 3254359 112738 None 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. Each 468.0 468.0 3.0 False None None False None False 1404.0 0 3254360 112738 None 5.44 Energy meter box. Supply and Installation / Fixing / Provision of Outdoor type.Thermoplastic Modular Panel encloser with transparent Polycarbonate Lid,shock proof, IP65 (Weather Proof),rust proof,dust proof,water proof,corrosion proof having internally Embedded gasket on both lid and flap suitable to fix single phase / three phase Energy meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hingedflap opening for operating MCB along with complete tamper proof SEALING facility. 300X450X214mm Each 5127.0 5127.0 1.0 False None None False None False 5127.0 0 3254361 112738 None 5.35 Suppling ,fixing and wiring electronic 10 to 40A three phase 4 wire class-1 Accuracy Energy Meter. Each 4745.0 4745.0 1.0 False None None False None False 4745.0 0 3254362 112738 None 5.7.3 Supply & Fixing Porcelaine fuse Channel with cut out on existing box using necessary nuts, bolts etc complete .a) 63 Amps Each 227.0 227.0 3.0 False None None False None False 681.0 0 3254363 112738 None 5.7.3 Supplying a 25litres capacity vertical/horizontal type wall mounting electrical water heater with 22SWG copper/SS sheet metal inner Container tinned inside and anticorrosive painted outside and 20SWG M.S sheet metal outer cover between inner and outer container filled with glass wool complete with inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The inner container shall have direct immersion type copperbtube nickel plate 2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree centigrade range therrnostat.The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. a) 25 Ltrs Group A Each 8000.0 8000.0 1.0 False None None False None False 8000.0 0 3254364 112738 None 14.13.1 Erection charges for fixing a 25 liters capacity wall mounting boiler(electrical geysers) using bolts,flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3pin top of approved make. Misc & Rounding off Each 600.0 600.0 1.0 False None None False None False 600.0 0 1717999499000 0 None None Buildings INTERNAL Electrification (Quarters) 243920.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254365 112739 None 2.2.1 Wiring System POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in the existing PVC conduit/ pipe using copper PVC insulated multistrand 2 x 1.5 sq.mm wire without switch on the existing the matel box the other end of the wires shall be terminated with sufficient loose length in a PVC round block , complete for each outlet point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switch Point 160.0 160.0 14.0 False None None False None False 2240.0 0 3254366 112739 None 2.2.2 Medium point above 3 mts upto 6mts from tapping point to outlet via switch Each 250.0 250.0 24.0 False None None False None False 6000.0 0 3254367 112739 None 2.2.3 Long point above 6 mts upto 10 mts from tapping point to outlet via switch Each 375.0 375.0 8.0 False None None False None False 3000.0 0 3254368 112739 None 3.4.1 Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3 Module Each 95.0 95.0 25.0 False None None False None False 2375.0 0 3254369 112739 None 3.4.2 4 - 5 Module Each 105.0 105.0 8.0 False None None False None False 840.0 0 3254370 112739 None 3.4.3 Module 6 Each 125.0 125.0 4.0 False None None False None False 500.0 0 3254371 112739 None 3.4.4 Module 8 Each 145.0 145.0 4.0 False None None False None False 580.0 0 3254372 112739 None 3.4.5 Module 10 / 12 Each 165.0 165.0 4.0 False None None False None False 660.0 0 3254373 112739 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 1 to 3 module Each 110.0 110.0 25.0 False None None False None False 2750.0 0 3254374 112739 None 3.5.2 module 4 Each 125.0 125.0 8.0 False None None False None False 1000.0 0 3254375 112739 None 3.5.3 module 6 Each 175.0 175.0 4.0 False None None False None False 700.0 0 3254376 112739 None 3.5.4 module 8 Each 200.0 200.0 4.0 False None None False None False 800.0 0 3254377 112739 None 3.5.5 module 10 -12 Each 230.0 230.0 4.0 False None None False None False 920.0 0 3254378 112739 None 3.6.1 Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate 6 amps one way switch Each 70.0 70.0 3.0 False None None False None False 210.0 0 3254379 112739 None 3.6.2 amps6 two way switch Each 95.0 95.0 3.0 False None None False None False 285.0 0 3254380 112739 None 3.6.3 Amps 63 way sockets Each 105.0 105.0 3.0 False None None False None False 315.0 0 3254381 112739 None 3.6.4 stepped fan Regulator's Each 290.0 290.0 3.0 False None None False None False 870.0 0 3254382 112739 None 3.6.8 A16 one way switch Each 115.0 115.0 3.0 False None None False None False 345.0 0 3254383 112739 None 3.6.11 Amps universal sockets 6/16 Each 162.0 162.0 3.0 False None None False None False 486.0 0 3254384 112739 None 3.6.12 Telephone socket Each 79.0 79.0 3.0 False None None False None False 237.0 0 3254385 112739 None 1.12 Supply and fixing one metal Fan box with round hook Each 85.0 85.0 3.0 False None None False None False 255.0 0 3254386 112739 None 1.2.1 Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures seen with fish wires where ever necessary 20 mm dia Mtr 40.0 40.0 50.0 False None None False None False 2000.0 0 3254387 112739 None 1.2.2 mm dia 25 Mtr 53.0 53.0 50.0 False None None False None False 2650.0 0 3254388 112739 None 1.3.1 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia Mtr 51.0 51.0 80.0 False None None False None False 4080.0 0 3254389 112739 None 1.3.2 mm25 dia Each 54.0 54.0 80.0 False None None False None False 4320.0 0 3254390 112739 None 2.3.2 WIRING FOR Lighting/Power Circuits using one of FRLS PVC insulated 1100 v grade multistrand copper wire with low conductor resistance single core wire in open or concealed wiring system with specified IS-694:1990 and conforming to GTP of Group-A. 1.5 Sq.mm Mtr 20.5 20.5 220.0 False None None False None False 4510.0 0 3254391 112739 None 2.3.3 sq.mm2,5 Mtr 32.0 32.0 220.0 False None None False None False 7040.0 0 3254392 112739 None 2.3.4 sq.mm 4 Mtr 45.0 45.0 200.0 False None None False None False 9000.0 0 3254393 112739 None 5.18.10 Control System MCB DB Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser. 12 Way SP & N( LDB/PDB) Each 1800.0 1800.0 2.0 False None None False None False 3600.0 0 3254394 112739 None 5.18.9 Way-8 SP & N Each 1450.0 1450.0 2.0 False None None False None False 2900.0 0 3254395 112739 None 5.17.1 Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 Amps SP Each 434.0 434.0 8.0 False None None False None False 3472.0 0 3254396 112739 None 5.17.4 AMPs SPN 6-32 Each 909.0 909.0 8.0 False None None False None False 7272.0 0 3254397 112739 None 5.20.2 Supplying and fixing 40 A DP ELMCB miniature circuit breaker on the existing MCB distribution board using necessary fixing materials and wiring complete as required Each 1336.0 1336.0 2.0 False None None False None False 2672.0 0 3254398 112739 None 4.8.1 Supply of box type suitable for 28W T5 single/twin lamp and suspension mounted luminaire & optical reflector. Prewired with HF electronic ballast, push fit type lamp holders and main contactors. Channel cover shall be made of CRCA MS sheet & finishing is done with stove enameled white with end caps made of engineering plastic. 1x 4'-28W Each 990.0 990.0 13.0 False None None False None False 12870.0 0 3254399 112739 None 7.1 Supplying of Exhaust Fan of 1440 RPM of 300mm (12") size with Bracket, blades complete for Light duty suitable to operate on 230V,50Hz, A.C.,supply Each 1200.0 1200.0 4.0 False None None False None False 4800.0 0 3254400 112739 None 7.3 Supplying capacitor type 48" sweep ceiling fan complete with down rod blades , shackle canopies etc suitable for operation on 230V 50 cycles single phase AC supply conforming to ISS - 374 - 1979 and with double ball bearing system [Khaitan, Crompton greaves, Usha] Each 2090.0 2090.0 6.0 False None None False None False 12540.0 0 3254401 112739 None 14.7 Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL fitting indoors on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires . Required nos of round blocks and clamps Each 110.0 110.0 10.0 False None None False None False 1100.0 0 3254402 112739 None 14.8 Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring complete Each 150.0 150.0 6.0 False None None False None False 900.0 0 3254403 112739 None 14.12 Fixing one exhaust fan in the nitch already left in the wall with bolts & nuts and a 5 Amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make with wire mesh and any frame if required Each 400.0 400.0 4.0 False None None False None False 1600.0 0 3254404 112739 None 14.1.2 Supplying and fixing 32 mm dia class A GI pipe bracket up to 2 mts long bent at suitable angle and fixing to this bracket 70 W MH street light fitting on wall using suitable clamps, bolts and nuts and wiring using suitable capacities of wires complete Each 835.0 835.0 3.6 False None None False None False 3006.0 0 3254405 112739 None 6.1 Supplying , fixing , wiring earth electrode using 40 mm dia 2.9 mm thick GI pipe 2.5 mt long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150 mm alround the pipe to complete depth .The connection from the pipe is to be established through GI wire of size as ISI specifications 7.3.3. of IS732 using 12mm dia bolts nuts washers and check nuts etc;the pipe shall have 16 through holes of 12mm dia Each 2999.7 2999.7 4.0 False None None False None False 11998.8 0 3254406 112739 None 5.30 Supplying, fixing and wiring Electronic Trivector Meter (ETV)5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter Each 1150.0 1150.0 2.0 False None None False None False 2300.0 0 3254407 112739 None 5.7.3 Supply & Fixing Porcelaine fuse Channel with cut out on existing box using necessary nuts, bolts etc complete .a) 63 Amps Each 227.0 227.0 2.0 False None None False None False 454.0 0 3254408 112739 None 6.18.5 Supplying and running of copper wire of size 10 SWG for grounding connections using necessary fixing materials as required. Rmtr 68.0 68.0 40.0 False None None False None False 2720.0 0 3254409 112739 None 6.18.5 Supplying and drawing PVC flexible Two pair telephone unarmoured tinned copper cable of approved make Rmtr 14.5 14.5 40.0 False None None False None False 580.0 0 3254410 112739 None 9.30 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. Rmtr 35.0 35.0 40.0 False None None False None False 1400.0 0 3254411 112739 None 6.4.5 CABLES Supplying of 1.1 KV LTUG cable having aluminum conductor PVC insulated,extruded inner sheathed ,galvanized , steel strip (except 2C x 10 Sqmm wire armoured) conforming to IS3975:1990 (No of strip indicated in GTP) and extruded PVC outer sheated , armoured cable weith specified IS 1554 part-I:1988 Group A3.5 core 25 sqmm Mtr 180.0 180.0 60.0 False None None False None False 10800.0 0 3254412 112739 None 6.5.2 Labour charges for laying of 25 Sqmm 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/ on wall/ on pole as required.when supplied agency in existing trench / on wall as required Mtr 15.5 15.5 60.0 False None None False None False 930.0 0 3254413 112739 None 6.6.2 Digging of Trench of 0.6M deep x 0.5M wide, refilling the Trench to reqd ground level & consolidating etc in soil (Ordinary) Mtr 102.0 102.0 60.0 False None None False None False 6120.0 0 3254414 112739 None 14.2.1 Supplying and fixing of 25 mm DIA Class A GI Pipe of wall thickness not less than 3.25mm suitable or UG cable of 1.1 KV class Mtr 972.0 972.0 60.0 False None None False None False 58320.0 0 3254415 112739 None 5.4 Supplying 100Amps 4x30x6mm Alluminium Strips 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete Mtr 2050.0 2050.0 1.0 False None None False None False 2050.0 0 3254416 112739 None 5.42 fabricatingg,supplying & mounting MS box made out of 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, providing with hinged front cover, equipped with tamperproof locking arrangement, with suitable clamps with necessary cable entry pipe with Gland Box, hold be finished with2 coats of red oxide & finally finished with approved colour enamelled paint etc complete. Sq CM 0.35 0.35 3050.0 False None None False None False 1067.5 0 3254417 112739 None 12.8.3 Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatiblefor pole mouting with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source." LED Streetlight 70watts Each 5480.0 5480.0 1.0 False None None False None False 5480.0 0 3254418 112739 None Item No.1 GESCOM Deposits For Doctor 1 nurse 1 Group D 1 Each 12000.0 12000.0 2.0 False None None False None False 24000.0 0 1717999499000 0 None None Buildings Construction of Sump Tank 197227.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254419 112740 None Page -6 Item no.2.4 Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in Hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. (Page -6/ Item no.2.4) cm 449.0 449.0 36.0 False None None False None False 16164.0 0 3254420 112740 None Item Code 1 KSRB 4-1.2 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. cm 6222.3 6222.3 2.5 False None None False None False 15555.75 0 3254421 112740 None Si No 2.1.4 Vol 1, Page No15, PWD CSR 2022-23 Vol KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. cm 6222.3 6222.3 8.0 False None None False None False 49778.4 0 3254422 112740 None KBS 4.6.2 ( I-4.29 p no 16 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. Specification No. Sq 406.0 406.0 5.0 False None None False None False 2030.0 0 3254423 112740 None Item No.4.31, P-16 KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work forvertical surface walls at any thic kness,including attached sters,buttresses,plinthand string courses cost of all materials,labour complete as per specification. Cum 360.0 360.0 74.52 False None None False None False 26827.2 0 3254424 112740 None Item No.4.36, P-17 KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specificaiton. Cu.cm 803.0 803.0 2.0 False None None False None False 1606.0 0 3254425 112740 None 15.21 p no116 KSRB15-3-13 Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing & including lime rendering complete as per Cu.cm 228.9 228.9 74.0 False None None False None False 16938.6 0 3254426 112740 None Item No.4.46.2 KSRB 4.9.2 : Providing TMT Steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per Specification (Page.16/Item No.4.46.2) fe 500 Kg 92.4 92.4 720.0 False None None False None False 66528.0 0 3254427 112740 None Item Code 1 Providing and fixing M.S. angle cover made out of 25x25x6mm L angle alround and M.S. sheet of heavy guage welded to the frame incuding painting and locking arrangements etc., complete. No 1800.0 1800.0 1.0 False None None False None False 1800.0 0 1717999499000 0 None None Buildings Construction of Septic Tank &Soak pit 187324.94 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254428 112741 None Item No 1.14.2 Chapter-1, Page No-8, CSR PWD, 2023 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work m 122.85 122.85 27.0 False None None False None False 3316.95 0 3254429 112741 None Item No 2.1.2 Chapter-2, Page No-15, DSR PWD, 2023 PCC Work Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances requiredcomplete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 0.9 False None None False None False 5352.48 0 3254430 112741 None Item No 2.2.3.1 Chapter-2, Page No-15, DSR PWD Reinforced Cement Concrete - M30 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately).M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 9.72 False None None False None False 64665.216 0 3254431 112741 None Item No 1.9 Chapter-1, Page No-07, DSR PWD,2023-24 Awailable excavated soil Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 0.9 False None None False None False 251.37 0 3254432 112741 None Item No 1.1, Chapter-1, Page No-7, DSR PWD,2023-24 Filling - New Earth KSRB 2.3 : Filling (new earth )Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m .Including cost of all labour complete as per specifications. Cum 454.65 454.65 1.2 False None None False None False 545.58 0 3254433 112741 None Item No 11.32, Chapter-11, Page No-84, DSR PWD TMT Bars Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). Kg 93.92 93.92 826.2 False None None False None False 77596.704 0 3254434 112741 None Item No 1 Centering Foundation, Sub structure of Cross drainages Cum 22.73 22.73 64.8 False None None False None False 1472.904 0 3254435 112741 None Item No 1.14.2 Chapter-1, Page No-8, CSR PWD, 2023 Earth Work Excavation- for pipeline "Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work" Cum 88.2 88.2 18.0 False None None False None False 1587.6 0 3254436 112741 None CSR 2021-22 Vol 5 Stone Ware Pipe "Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing." SOR Code T030B, Page No 184, Chapter-18,Water supply & UGD Works m 489.3 489.3 30.0 False None None False None False 14679.0 0 3254437 112741 None Item No 1.9 Chapter-1, Page No-07, DSR PWD,2023-24 Filling of Available excavated soil Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 88.2 88.2 16.2 False None None False None False 1428.84 0 3254438 112741 None CSR 2021-22 Vol 5 Inspection Chamber "Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE Inspection chambres with lid consisting of inlet & outlet arrangements with base, riser of min. 0.42 m depth which includes earth work, fixing in CC-1:2:4 with appurtenances., complete. (c) civil works like Earthwork excavation for the pipeline trenches for laying of PVC-U pipes for the house connections in all types of soils , disintegrated rock,soft rock, hard rock, including cutting of any road using , crossing drains, compound, Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, c.c. wood work, steel work, including T & P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceable material with all lifts and lead , restoring the damaged portions inside or outside the property premises, refilling the portions of trenches that are dug open including linking to existing sewer network with appurtenances. complete" SOR Code T800A, Page No 202, Chapter-18,Water supply & UGD Works Each 8214.15 8214.15 2.0 False None None False None False 16428.3 0 1717999499000 0 None None Buildings Bore well 179167.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254439 112742 None CSR 2021-22 Vol 5 Debris removal Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergerss method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a)Above 20 M and upto 30 M - 15, b) Above 30 M - 30 (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100- is to be deducted for Dry Borewell towards yield test. SOR Code O0404A, Page No 151-152,Water supply & UGDWork Each 5398.05 5398.05 1.0 False None None False None False 5398.05 0 3254440 112742 None CSR 2021-22 Vol 5 Sinking borewell Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) SOR Code O010, Page No 151,Water supply & UGD Works CSR 2021-22 Vol 5 Borewell depth of 0 to 50m m 304.5 304.5 50.0 False None None False None False 15225.0 0 3254441 112742 None CSR 2021-22 Vol 5 Borewell depth of 50 to 100m m 382.2 382.2 50.0 False None None False None False 19110.0 0 3254442 112742 None CSR 2021-22 Vol 5 Borewell depth of100 to 150m m 406.35 406.35 50.0 False None None False None False 20317.5 0 3254443 112742 None CSR 2021-22 Vol 5 Borewell depth of150 to 200m m 471.45 471.45 50.0 False None None False None False 23572.5 0 3254444 112742 None CSR 2021-22 Vol 5 Borewell Casing pipe Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. SOR Code O160A, Page No 154,Water supply & UGD Works m 2029.65 2029.65 6.0 False None None False None False 12177.9 0 3254445 112742 None CSR 2021-22 Vol 5 Borewell Casing Collar Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments SOR Code O170A, Page No 154,Water supply & UGD Works. Each 157.5 157.5 1.0 False None None False None False 157.5 0 3254446 112742 None CSR 2021-22 Vol 5 Borewell Casing Cap Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge SOR Code O170A, Page No 154,Water supply & UGD Works Each 157.5 157.5 1.0 False None None False None False 157.5 0 3254447 112742 None CSR 2021-22 Vol 5 Yield Testing Yield testing of borewells at final depth with a minimum of 10 hours continuously with the help of pump testing unit including the cost of transportation charges, crew charges and cost of consumables. SOR Code O090A, Page No 152,Water supply & UGD Works Each 16417.8 16417.8 1.0 False None None False None False 16417.8 0 3254448 112742 None CSR 2021-22 Vol 5 Submersible pump set Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments SOR Code P040, Page No 158,Water supply & UGD Works CSR 2021-22 Vol 5 Each 157.5 157.5 1.0 False None None False None False 157.5 0 3254449 112742 None CSR 2021-22 Vol 5 HDPE Pipes "Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : " SOR Code K010A, Page No 121,Water supply & UGD Works CSR 2021-22 Vol 5 m 150.15 150.15 200.0 False None None False None False 30030.0 0 3254450 112742 None CSR 2021-22 Vol 5 Cable Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments SOR Code P230B, Page No 161,Water supply & UGD Works CSR 2021-22 Vol 5 1x3x2.5 m2 m 102.9 102.9 200.0 False None None False None False 20580.0 0 3254451 112742 None CSR 2021-22 Vol 5 Control Panel "Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter" SOR Code P270, Page No162,Water supply & UGD Works Each 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3254452 112742 None CSR 2021-22 Vol 5 250 Amps distribution Panel Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark SOR Code P340A, Page No163,Water supply & UGD Works Each 4725.0 4725.0 1.0 False None None False None False 4725.0 0 3254453 112742 None CSR 2021-22 Vol 5 Non return Valve The Non Return Valve (NRV) assembly complete with rubber ring SOR Code P020M, Page No157, Water supply & UGD Works Each 609.0 609.0 1.0 False None None False None False 609.0 0 3254454 112742 None CSR 2021-22 Vol 5 250 Amps distribution Panel "Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets." SOR Code P290A, Page No162, Water supply & UGD Works CSR 2021-22 Vol 5 Each 557.5 557.5 1.0 False None None False None False 557.5 0 1717999499000 0 None None Buildings WATER SUPPLY & SANITARY WORKS 280010.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254455 112743 None I-2.3 p no 5 Earth excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5 m and above in width, in Ordinary soil not exceeding 1.5m in depth including dressing the botton and sides of pits and trenches, stacking the excavated soil clear from edges of excavation, after breaking of clodes complete as per specifications with all lead and lift, etc., complete as per directions of the Engineer-in-charge ( Sanitary lines Cum 180.0 180.0 24.45 False None None False None False 4401.0 0 3254456 112743 None It no13.70.7(Page-96 KSRB13-8.5 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 160mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection Rmtr 640.0 640.0 80.28 False None None False None False 51379.2 0 3254457 112743 None 13.70.5 p no96 KSRB13-8.5 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection Nos 440.0 440.0 16.0 False None None False None False 7040.0 0 3254458 112743 None I-11.50.2 p no75 KSRB 12-8.1 : Constructing brick masonry inspection chamber 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications etc., complete as per directions of the Engineer-in-charge ( No 7295.4 7295.4 8.0 False None None False None False 58363.2 0 3254459 112743 None I-11.50.3 p no 76 KSRB 12-8.1 : Constructing brick masonry inspection chamber 450x450mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications etc., complete as per directions of the Engineer-in-charge ( No 7295.4 7295.4 3.0 False None None False None False 21886.2 0 3254460 112743 None I- 12.112.2 )p no90 Providing stoneware gully trap of approved quality and make fixing in CC 1:2:4 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead). 15cms x 10cms No 270.0 270.0 9.0 False None None False None False 2430.0 0 3254461 112743 None I-12.111) p no90 Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. No 150.0 150.0 8.0 False None None False None False 1200.0 0 3254462 112743 None KBS 11 I.No 12.4 P-79 KSRB 11-4 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make ) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. No 2067.0 2067.0 4.0 False None None False None False 8268.0 0 3254463 112743 None I.No 12.5 page- 79 KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of ittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 No 4956.0 4956.0 1.0 False None None False None False 4956.0 0 3254464 112743 None I-12.24 p83 KSRB 11-11.2 : Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. No 3149.0 3149.0 4.0 False None None False None False 12596.0 0 3254465 112743 None I-13.91 p no Providing and Fixing Stainless Steel sink of sizes upto 60cms x 45cms in 20mm thick granite slab of by cutting required thickness and width of grooves and fixing using adhesives etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. ( At Kitchens3 No 5437.0 5437.0 2.0 False None None False None False 10874.0 0 3254466 112743 None i.no 12.41 p-84 KSRB 11-15.3 : Providing and fixing 453 x 357mm rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications. No 1136.0 1136.0 3.0 False None None False None False 3408.0 0 3254467 112743 None I-12.46 p no85 KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications. etc., complete as per directions of the Engineer-in-charge ( No 674.0 674.0 4.0 False None None False None False 2696.0 0 3254468 112743 None P.No.99I.No.13.86 13.86 Providing and fixing Chlorinated Poli Vinyl Chloride (CPVC) pipes conforming to IS 15778 having terminal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this including fixing the pipe with clamp at 1.00mtrs spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. (Internal)(Concealed work including cutting chasses & good the wall Etc) ( a) 20 mm dia - Item No 13.86.2 No 235.0 235.0 170.0 False None None False None False 39950.0 0 3254469 112743 None Item No 13.87.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).(P.No.99/I.No.13.86 - 40mm nominal OD pipes a) 25 mm dia - No 213.0 213.0 70.0 False None None False None False 14910.0 0 3254470 112743 None I-13.26 p no93 KSRB13-6.2-1 : Providing and fixing in position brass stop cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 /13.3 etc., complete as per directions of the Engineer-in-charge ( No 128.0 128.0 5.0 False None None False None False 640.0 0 3254471 112743 None I-13.33 p no9 KSRB13-6.3-2: Providing and fixing in position brass gate vaive with C.I wheel of approved quality (screwed end) 20mm nominal bore including cost of ail materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 /13.3 etc., complete as per directions of the Engineer-in-charge (3 No 384.0 384.0 6.0 False None None False None False 2304.0 0 3254472 112743 None I-13.34 p no93 KSRB13-6.3-3: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.6 /13.3 etc., complete as per directions of the Engineer-in-charge ( No 547.0 547.0 3.0 False None None False None False 1641.0 0 3254473 112743 None I.NO 13.41 P-94 KSRB13-6.4-2 : Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. No 397.0 397.0 5.0 False None None False None False 1985.0 0 3254474 112743 None KBS 13.2.15.113.9 i.nO 13.70.1 P-96 KSRB 13-8.5 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials,labour and HOM of equipments with all leads complete as per specifications. Specification No. Rmtr 137.0 137.0 18.0 False None None False None False 2466.0 0 3254475 112743 None I-13.78 p no96 KSRB 13-11.1: Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 etc., complete as per directions of the Engineer-in-charge ( No 6048.0 6048.0 4.0 False None None False None False 24192.0 0 3254476 112743 None Page -7 Item no.2.11 KSRB 2-4 : Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications allow 60% of rate considered under item KSRB 2.3 () Cum 48.5 48.5 50.0 False None None False None False 2425.0 0 1717999499000 0 None None Buildings 10KVA DG SET 758778.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254477 112744 None it no 11.1p no 60 Supply,Installation,Testing & Commissioning of 10KVA air cooled Generator set three phase,415V,0.8 PF 50Hz, with HSD as fuel. Diesel engine 10 BHP developing at 1500 RPM electrical start coupled to Alternator mounted on a common base frame integral fuel tank with CPCB standards acoustic enclosure and obtaining all the Statutory Approvals/certificates from related departments including one year warranty maintainance complete (inclusive of all taxes) (Make:- Kirloskar/Greaves/AshokLeyLand/equivalent) Set 686250.0 686250.0 1.0 False None None False None False 686250.0 0 3254478 112744 None 6.4.4 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 Class A’ PVC Cable 4 core 16 sqmm Mtr 150.0 150.0 30.0 False None None False None False 4500.0 0 3254479 112744 None 6.5.1 Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required.(69/5) In exixting trench/duct. 6 sqmm to 16 sqmm Mtr 11.88 11.88 35.0 False None None False None False 415.8 0 3254480 112744 None 6.6.1 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)(70/6) In soil (ordinary) Mtr 76.0 76.0 25.0 False None None False None False 1900.0 0 3254481 112744 None 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class.(70/9) 40mm Mtr 335.0 335.0 18.0 False None None False None False 6030.0 0 3254482 112744 None 6.11.2 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)(70/11) 25mm dia Each 84.0 84.0 6.0 False None None False None False 504.0 0 3254483 112744 None 6.8 Providing and laying in position 100mm dia stone ware pipe in exisitng trench.(70/8) Mtr 215.0 215.0 90.0 False None None False None False 19350.0 0 3254484 112744 None 6.1 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.(68/1) No 2999.7 2999.7 10.0 False None None False None False 29997.0 0 3254485 112744 None 5.11.1 Supplying of on load change over switches 4 poles, 415V, 50Hz, AC Supply with AC-23A Duty.(33/7) a) Up to 63Amps Each 4300.0 4300.0 1.0 False None None False None False 4300.0 0 3254486 112744 None 5.6.6 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc.(32/2) a) 20"x20"x2.5" Each 292.0 292.0 1.0 False None None False None False 292.0 0 3254487 112744 None 14.16.1 Fixing of . Amps TPST / change over switch/ Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling.(30/16) e) 15 A to 63 A TPDT/ COS Each 240.0 240.0 1.0 False None None False None False 240.0 0 3254488 112744 None Item No 1 Fee and charges to be paid to electrical inspectorate and pollution control board etc., Job 5000.0 5000.0 1.0 False None None False None False 5000.0 0 1717999499000 0 None None Buildings RAIN WATER HARVESTING TO CHC BUILDING 175087.22 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254489 112745 None DSR 2023-24 Vol-1 Item No. 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 4.4 False None None False None False 471.24 0 3254490 112745 None DSR 2023-24 Vol-1 Item No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates" Cum 6555.15 6555.15 0.78 False None None False None False 5113.017 0 3254491 112745 None DSR 2023-24 Vol-2 Item No.6.8 Pg.No 14 Brick Work "Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work" Cum 8367.45 8367.45 1.37 False None None False None False 11463.4065 0 3254492 112745 None Item No 1 Providing and filling murrum/gravel soil (CNS soil for foundation or around pipes including cost of materials, machinery, labour, breaking lods, spreading in layers of 100 to 150mm, watering, compaction by earth masters to achieve density control of not less than 90 percent etc., complete with lead upto 50m and all lifts etc.,complete with all lead & lift and as per the instructions and directions of the Engineer-In-Charge of the work. As Per Data Rates Approved by CE H&FWD Bangalore Cum 378.0 378.0 1.2 False None None False None False 453.6 0 3254493 112745 None DSR 2023-24 Vol-2 Si No.8.9 Pg.No 42 Outer Plaster Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 5.4 False None None False None False 2182.95 0 3254494 112745 None DSR 2023-24 Vol-2 Si No.13.48 Pg.No.125 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter" Rmtr 305.55 305.55 250.0 False None None False None False 76387.5 0 3254495 112745 None DSR 2023-24 Vol-2 Si No.13.4.2 Pg.No.125 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :" No 627.9 627.9 5.0 False None None False None False 3139.5 0 3254496 112745 None It. No-13.31.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall " PWD SR 2018-19 Kalburgi CircleKalburgi, Page No-99 Rmtr 420.0 420.0 100.0 False None None False None False 42000.0 0 3254497 112745 None PWD SR 2018-19 Page No-22 It. No-28.13 KSRRB M2200-9: Providing and laying of Filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2500.4.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification complete as per specifications.MORTH specification No. 710.1.4 of IRC: 78 & 2200 Cum 2195.55 2195.55 1.46 False None None False None False 3205.503 0 3254498 112745 None DSR 2023-24 Page No-126 It. No-13.53 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Each 5924.1 5924.1 5.0 False None None False None False 29620.5 0 3254499 112745 None Item No 1 Providing and laying of sand with all lead and lift and as per directions of the Engineer in charge of work As per Market Rate Cum 1050.0 1050.0 1.0 False None None False None False 1050.0 0 1717999499000 0 None None Buildings SOLAR WATER HEATER 171500.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254500 112746 None Item No 1 Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Material-Stainless steel 304-L Grade with Aluminium Stucco cladding made of High quality PUF insulation to minimizes heat loss and hold water Temperature upto 72 Hrs.with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. Fitted with Sacrificial Anode it no 8.4.1/p no 52 ele SR 2019-20 200 Liter capacity- 20 nos Tubes Each 46000.0 46000.0 1.0 False None None False None False 46000.0 0 3254501 112746 None 8.4.1 Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Material-Stainless steel 304-L Grade with Aluminium Stucco cladding made of High quality PUF insulation to minimizes heat loss and hold water Temperature upto 72 Hrs.with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. Fitted with Sacrificial Anode it no 8.4.1/p no 52 ele SR 2019-20 100 Liter capacity- 10nos Tubes Each 25100.0 25100.0 5.0 False None None False None False 125500.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1717999501000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1717999501000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1717999501000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1717999501000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1717999501000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1717999510000 0 None None ELIGIBILITY The Tenderer shall furnish, as part of his tender, earnest money deposit in the amount as shown in column 4 of the Table of IFT for this particular work. Tenderer can pay the full EMD amount of Rs. 3,49,550/- through e-payment or the Earnest Money Deposit shall be in two parts. Part(1): Rs. 1,00,000/- by e-payment, Part-(2): Rs. 2,49,550/- EMD shall be in favour of Executive Engineer, PWD, Bidar Division, Bidar, and may be in the form of Bankers Cheque/Demand Draft/Pay order in favour of Executive Engineer, PWD, Bidar Division, Bidar, payable at Bidar or cash or specified Small Savings Instruments pledged to the Executive Engineer, PWD, Bidar Division None 1717999522000 0 None None ELIGIBILITY Period for completion of this work is 11(Eleven) months including Monsoon. None 1717999534000 0 None None ELIGIBILITY Part (2) Rs. 2,49,550/- EMD shall be in favour of Executive Engineer, PWD , Bidar Division, Bidar and may be in the form of Bankers Cheque/Demand Draft/Pay order in favour of Executive Engineer, PWD Divn. Bidar, payable at Bidar or cash or specified Small Savings Instruments pledged to the Executive Engineer, PWD.Division, Bidar or Bank Guarantee in the prescribed format obtained form any Nationaled / Scheduled Banks. None 1717999544000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 466.06 Lakhs/- Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation. None 1717999556000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 466.06 Lakhs/- Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation. None 1717999566000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (c) executed in any one year, the following minimum quantities of work(1) EWE: 2226.00 cum (2) RCC/PCC: 442.00 cum (3) RRM/BBM: 225.39 cum (4) Plastering: 3157.24 Sqm (5) Flooring: 708.405 sqm (6) TMT Steel: 33.00 Tonne None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (b) satisfactorily completed as prime contractor, at least one similar work such as Construction of Building such as of value not less than Rs 116.52 Lakhs/- Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (c) executed in any one year, the following minimum quantities of work(1) EWE: 2226.00 cum (2) RCC/PCC: 442.00 cum (3) RRM/BBM: 225.39 cum (4) Plastering: 3157.24 Sqm (5) Flooring: 708.405 sqm (6) TMT Steel: 33.00 Tonne Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Liquid assets and/or availability of credit facilities of no less than Rs. 63.56 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Past Experience None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None List of existing commitments and ongoing works Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing works None None None None List of works for which tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 466.06 Lakhs/- Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Work done Certificate True Technical Bid Line of Credit True Technical Bid Other Documents False Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1717999907000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer PWD Division Bidar street None city Bidar state Karnataka pin 585401
tenderRecallDTO	None