| 1718153701000 | 0 | None | None | Other Works | CONSTRUCTION OF TOILET ANGANAVADI IN KANAKANAGARA | 109431.13 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273522 | 113505 | None | code01 | Earthwork in excavation for Foundation of building, water supply,sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width in Hardsoil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50m after breaking of clods complete as per specificationsSR 2023-24 vol-1 Pg No 6 It No 1.6.1 (D&R) | Cum | 249.26 | 249.26 | 9.996 | False | None | None | False | None | False | 2491.60296 | 0 | | 3273523 | 113505 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD SR Vol-01, 2023-24, Item no. 2.1.2, Page No.15) | Cum | 5833.92 | 5833.92 | 0.627 | False | None | None | False | None | False | 3657.86784 | 0 | | 3273524 | 113505 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (I. No 5.4, P. No-9, Vol-2 of PWD Common SR 2023-24) | Cum | 6580.67 | 6580.67 | 2.66 | False | None | None | False | None | False | 17504.5822 | 0 | | 3273525 | 113505 | None | code04 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (I. No 2.5.1, P. No-16, Vol-1 of PWD Common SR 2023-24) | Cum | 10143.9 | 10143.9 | 0.9212 | False | None | None | False | None | False | 9344.56068 | 0 | | 3273526 | 113505 | None | code05 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (I. No 2.5.1, P. No-16, Vol-1 of PWD Common SR 2023-24) | Cum | 10806.9 | 10806.9 | 0.182 | False | None | None | False | None | False | 1966.8558 | 0 | | 3273527 | 113505 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (I. No 2.11, P. No-18, Vol-1 of PWD Common SR 2023-24) | Tonne | 92140.71 | 92140.71 | 0.088 | False | None | None | False | None | False | 8108.38248 | 0 | | 3273528 | 113505 | None | code07 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (I. No 6.8, P. No-14, Vol-2 of PWD Common SR 2023-24) | Cum | 8208.07 | 8208.07 | 1.06 | False | None | None | False | None | False | 8700.5542 | 0 | | 3273529 | 113505 | None | code08 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge . (I. No 8.1.1, P. No-41, Vol-2 of PWD Common SR 2023-24) | Sqm | 262.65 | 262.65 | 2.25 | False | None | None | False | None | False | 590.9625 | 0 | | 3273530 | 113505 | None | code09 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (I. No 8.2.1, P. No-41, Vol-2 of PWD Common SR 2023-24) | Sqm | 303.85 | 303.85 | 5.38 | False | None | None | False | None | False | 1634.713 | 0 | | 3273531 | 113505 | None | code10 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (I. No 8.8, P. No-42, Vol-2 of PWD Common SR 2023-24) | Sqm | 382.13 | 382.13 | 19.477 | False | None | None | False | None | False | 7442.74601 | 0 | | 3273532 | 113505 | None | code11 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (I. No 9.12.2, P. No-60, Vol-2 of PWD Common SR 2023-24) | Sqm | 1179.35 | 1179.35 | 3.15 | False | None | None | False | None | False | 3714.9525 | 0 | | 3273533 | 113505 | None | code12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) (I. No 8.33.1, P. No-46, Vol-2 of PWD Common SR 2023-24) | Sqm | 162.74 | 162.74 | 27.112 | False | None | None | False | None | False | 4412.20688 | 0 | | 3273534 | 113505 | None | code13 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications (I. No 8.39, P. No-48, Vol-2 of PWD Common SR 2023-24) | Cum | 142216.22 | 142216.22 | 0.061 | False | None | None | False | None | False | 8675.18942 | 0 | | 3273535 | 113505 | None | code14 | Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures )(I. No 12.20, P. No-100, Vol-2 of PWD Common SR 2023-24) | Sqm | 6334.5 | 6334.5 | 1.89 | False | None | None | False | None | False | 11972.205 | 0 | | 3273536 | 113505 | None | code15 | Providing and fixing in position fully glazed for windows shutters with Honne wood stiles and rails of 35mm. thick 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) (I. No 12.44, P. No-103, Vol-2 of PWD Common SR 2023-24) | Sqm | 5650.58 | 5650.58 | 0.54 | False | None | None | False | None | False | 3051.3132 | 0 | | 3273537 | 113505 | None | code16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(I. No 8.40, P. No-48, Vol-2 of PWD Common SR 2023-24) | Sqm | 118.45 | 118.45 | 4.38 | False | None | None | False | None | False | 518.811 | 0 | | 3273538 | 113505 | None | code17 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. .(I. No 14.2.1, P. No-131, Vol-2 of PWD Common SR 2023-24) | Each | 4983.14 | 4983.14 | 1.0 | False | None | None | False | None | False | 4983.14 | 0 | | 3273539 | 113505 | None | code18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (I. No 13.31.2, P. No-122, Vol-2 of PWD Common SR 2023-24) 20 mm nominal dia Pipes m | Mtr | 249.26 | 249.26 | 25.0 | False | None | None | False | None | False | 6231.5 | 0 | | 3273540 | 113505 | None | code19 | PVC pipes of10 Kg/cm2 for 110mm. (I. No 686, P. No-45, Vol-5 of PWD Common SR 2023-24) | Mtr | 345.05 | 345.05 | 9.0 | False | None | None | False | None | False | 3105.45 | 0 | | 3273541 | 113505 | None | code20 | SS Aldrop 16mm dia, 300mm(I. No 22.15.4, P. No-218, Vol-2 of PWD Common SR 2023-24) | No | 386.25 | 386.25 | 1.0 | False | None | None | False | None | False | 386.25 | 0 | | 3273542 | 113505 | None | code21 | SS Tower Bolts 250x10mm (I. No 22.15.7, P. No-218, Vol-2 of PWD Common SR 2023-24) | No | 206.0 | 206.0 | 3.0 | False | None | None | False | None | False | 618.0 | 0 | | 3273543 | 113505 | None | code22 | SS Door stopper 75mm (I. No 22.15.10, P. No-219, Vol-2 of PWD Common SR 2023-24) | No | 103.0 | 103.0 | 1.0 | False | None | None | False | None | False | 103.0 | 0 | | 3273544 | 113505 | None | code23 | SS hinges 100 mm (I. No 22.15.9, P. No-219, Vol-2 of PWD Common SR 2023-24) | No | 72.1 | 72.1 | 3.0 | False | None | None | False | None | False | 216.3 | 0 |
|