createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718451132773 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1230.00 emd 49200.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 27-06-2024 16:30:00 tenderQueryClose 26-06-2024 11:00:00 technicalBidOpen 28-06-2024 16:45:00 publishedDate 16-06-2024 13:51:18 publishedByPost PWD_EE_DIV_BGV publishedByUser KPE12007 - S S SOBARAD bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson S S Sobarad splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08312467103 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1718451132805 version 12 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT7682 title Construction of Library Building at Bailhongal under H/A-8443 Deposit Contribution (Reserved for SC Category Only). description Construction of Library Building at Bailhongal under H/A-8443 Deposit Contribution (Reserved for SC Category Only). category WORKS categoryText Works ecv 4919630.56 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1685 locationName PWD Division Office Belagavi provisionalAmount 5000000.0 groupOverheadTotal 0.0 fileNumber KPWD/BLH/2023-24/8443/LIBRARY
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718451133000 0 None None Buildings BUILDING WORK-GROUND FLOOR 3617637.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3295684 114662 None 1.12 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting,barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radiusof 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 115.46 115.46 50.98 False None None False None False 5886.1508 0 3295685 114662 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 123.97 123.97 145.82 False None None False None False 18077.3054 0 3295686 114662 None 4.1 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Cum 143.42 143.42 125.85 False None None False None False 18049.407 0 3295687 114662 None 2.1.3 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 7279.03 7279.03 26.34 False None None False None False 191729.6502 0 3295688 114662 None 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7700.77 7700.77 30.16 False None None False None False 232255.2232 0 3295689 114662 None 2.2.3 FORMWORK FOR FOOTING @ 8 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 616.06 616.06 30.16 False None None False None False 18580.3696 0 3295690 114662 None 2.4.3 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork to be paid separately) Cum 7700.77 7700.77 7.11 False None None False None False 54752.4747 0 3295691 114662 None 2.4.3 FORMWORK FOR PLINTH BEAM @ 50 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement to be paid separately) Cum 3850.39 3850.39 7.11 False None None False None False 27376.2729 0 3295692 114662 None 2.4.3 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork to be paid separately) Cum 7700.77 7700.77 2.58 False None None False None False 19867.9866 0 3295693 114662 None 2.4.3 FORMWORK FOR COLUMN @ 70 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement to be paid separately) Cum 5390.54 5390.54 2.58 False None None False None False 13907.5932 0 3295694 114662 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8316.98 8316.98 6.62 False None None False None False 55058.4076 0 3295695 114662 None 2.5.2 FORMWORK FOR COLUMN @ 70 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 5821.89 5821.89 6.62 False None None False None False 38540.9118 0 3295696 114662 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8316.98 8316.98 11.97 False None None False None False 99554.2506 0 3295697 114662 None 2.5.2 FORMWORK FOR LINTEL & SLAB BEAM @ 60 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 4990.19 4990.19 11.97 False None None False None False 59732.5743 0 3295698 114662 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8316.98 8316.98 17.86 False None None False None False 148541.2628 0 3295699 114662 None 2.5.2 FORMWORK FOR SLAB @ 50 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 4158.49 4158.49 17.86 False None None False None False 74270.6314 0 3295700 114662 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8316.98 8316.98 2.36 False None None False None False 19628.0728 0 3295701 114662 None 2.5.2 FORMWORK FOR STAIRCASE @ 50 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 4158.49 4158.49 2.36 False None None False None False 9814.0364 0 3295702 114662 None 5.1.1 5.2 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6819.61 6819.61 19.24 False None None False None False 131209.2964 0 3295703 114662 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8316.98 8316.98 1.66 False None None False None False 13806.1868 0 3295704 114662 None 2.5.2 FORMWORK FOR CHAJJA @ 45 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 3742.64 3742.64 1.66 False None None False None False 6212.7824 0 3295705 114662 None 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.If the height of embankment construction is more than 1.50 m add 5% per m for every 1.50 m height or part there off Deduct 5% per m if rollers are not used and tamping is done manually Add 8% per m for works under foul & sullage situation Cum 576.1 576.1 12.57 False None None False None False 7241.577 0 3295706 114662 None 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 108726.04 108726.04 8.9939 False None None False None False 977871.131156 0 3295707 114662 None 2.1.4 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 7556.14 7556.14 0.45 False None None False None False 3400.263 0 3295708 114662 None 6.8 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9685.52 9685.52 24.0 False None None False None False 232452.48 0 3295709 114662 None 6.15 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1255.51 1255.51 12.81 False None None False None False 16083.0831 0 3295710 114662 None 11.34A 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 204.19 204.19 468.29 False None None False None False 95620.1351 0 3295711 114662 None 11.44 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 5280.91 5280.91 27.12 False None None False None False 143218.2792 0 3295712 114662 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 430.25 430.25 29.06 False None None False None False 12503.065 0 3295713 114662 None 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 450.91 450.91 175.46 False None None False None False 79116.6686 0 3295714 114662 None 8.1.1 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 309.93 309.93 212.57 False None None False None False 65881.8201 0 3295715 114662 None 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 121.54 121.54 318.52 False None None False None False 38712.9208 0 3295716 114662 None 9.21.2 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1504.67 1504.67 111.74 False None None False None False 168131.8258 0 3295717 114662 None 9.24 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3466.32 3466.32 6.32 False None None False None False 21907.1424 0 3295718 114662 None 9.30 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 6475.65 6475.65 17.52 False None None False None False 113453.388 0 3295719 114662 None 9.9 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1307.77 1307.77 2.95 False None None False None False 3857.9215 0 3295720 114662 None 9.38 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1691.84 1691.84 17.26 False None None False None False 29201.1584 0 3295721 114662 None 8.39 8.63 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 154.36 154.36 318.52 False None None False None False 49166.7472 0 3295722 114662 None 12.12 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 150955.11 150955.11 0.1926 False None None False None False 29073.954186 0 3295723 114662 None 12.15 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 9047.44 9047.44 10.71 False None None False None False 96898.0824 0 3295724 114662 None 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m 290.48 290.48 11.8 False None None False None False 3427.664 0 3295725 114662 None 12.55.2 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. Sqm 2479.42 2479.42 3.15 False None None False None False 7810.173 0 3295726 114662 None 8.3 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 211.48 211.48 204.52 False None None False None False 43251.8896 0 3295727 114662 None 8.34.1 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 64.42 64.42 27.85 False None None False None False 1794.097 0 3295728 114662 None 8.45.2 8.45.2 Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 210.26 210.26 27.85 False None None False None False 5855.741 0 3295729 114662 None 8.34.3 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 60.77 60.77 26.02 False None None False None False 1581.2354 0 3295730 114662 None 8.40 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 139.77 139.77 26.02 False None None False None False 3636.8154 0 3295731 114662 None 12.51 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1234.85 1234.85 3.0 False None None False None False 3704.55 0 3295732 114662 None 11.28 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts. Kgs 686.7 686.7 10.0 False None None False None False 6867.0 0 3295733 114662 None 6.8.1 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) Sqm 1298.05 1298.05 40.0 False None None False None False 51922.0 0 3295734 114662 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 323.3 323.3 145.82 False None None False None False 47143.606 0 1718451133000 0 None None Buildings BUILDING WORK-FIRST FLOOR 546112.37 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3295735 114663 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm Cum 8400.15 8400.15 1.38 False None None False None False 11592.207 0 3295736 114663 None 2.5.2 FORMWORK FOR COLUMN @ 70 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" Cum 5880.11 5880.11 1.38 False None None False None False 8114.5518 0 3295737 114663 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8400.15 8400.15 2.49 False None None False None False 20916.3735 0 3295738 114663 None 2.5.2 FORMWORK FOR LINTEL & SLAB BEAM @ 60 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 5040.09 5040.09 2.49 False None None False None False 12549.8241 0 3295739 114663 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8400.15 8400.15 3.24 False None None False None False 27216.486 0 3295740 114663 None 2.5.2 FORMWORK FOR SLAB @ 50 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 4200.08 4200.08 3.24 False None None False None False 13608.2592 0 3295741 114663 None 2.5.2 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8400.15 8400.15 0.65 False None None False None False 5460.0975 0 3295742 114663 None 2.5.2 FORMWORK FOR CHAJJA @ 45 % of the rate of above concrete item Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 3780.07 3780.07 0.65 False None None False None False 2457.0455 0 3295743 114663 None 2.11 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 109813.3 109813.3 1.0436 False None None False None False 114601.15988 0 3295744 114663 None 2.1.4 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 7631.7 7631.7 2.16 False None None False None False 16484.472 0 3295745 114663 None 6.8 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9782.38 9782.38 15.92 False None None False None False 155735.4896 0 3295746 114663 None 11.34A 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 206.23 206.23 32.4 False None None False None False 6681.852 0 3295747 114663 None 11.44 11.44 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 5333.72 5333.72 1.8 False None None False None False 9600.696 0 3295748 114663 None 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 455.42 455.42 145.9 False None None False None False 66445.778 0 3295749 114663 None 8.1.1 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 313.03 313.03 55.5 False None None False None False 17373.165 0 3295750 114663 None 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 122.76 122.76 55.5 False None None False None False 6813.18 0 3295751 114663 None 9.22.2 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm Sqm 1627.74 1627.74 12.6 False None None False None False 20509.524 0 3295752 114663 None 12.12 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 152464.66 152464.66 0.043 False None None False None False 6555.98038 0 3295753 114663 None 12.15 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 9137.91 9137.91 2.21 False None None False None False 20194.7811 0 3295754 114663 None 8.34.1 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 65.06 65.06 5.73 False None None False None False 372.7938 0 3295755 114663 None 8.45.2 8.45.2 Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 212.37 212.37 5.73 False None None False None False 1216.8801 0 3295756 114663 None 8.34.3 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 61.38 61.38 1.8 False None None False None False 110.484 0 3295757 114663 None 8.40 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 141.17 141.17 1.8 False None None False None False 254.106 0 3295758 114663 None 12.51 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1247.19 1247.19 1.0 False None None False None False 1247.19 0 1718451133000 0 None None Buildings WATER SUPPLY SANITORY 277778.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3295759 114664 None 652 1176 3707 PVC pipe - OD 25mm and 10 Kg/sqcm m m 27.95 27.95 65.0 False None None False None False 1816.75 0 3295760 114664 None 654 1178 3708 PVC pipe - OD 32mm and 10 Kg/sqcm m m 40.11 40.11 20.0 False None None False None False 802.2 0 3295761 114664 None 2.82.1 B199 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B199A PPR Double Union Ball Valve 20mm Nos 958.95 958.95 8.0 False None None False None False 7671.6 0 3295762 114664 None 2.82.2 B199 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B199B PPR Double Union Ball Valve 25mm Nos 1307.77 1307.77 8.0 False None None False None False 10462.16 0 3295763 114664 None 2.82.3 B199 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022)B199C PPR Double Union Ball Valve 32mm No 2168.27 2168.27 3.0 False None None False None False 6504.81 0 3295764 114664 None 2.78.2 B195 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B195B PPR Male Threaded Elbow 20X1/2mm Nos 99.66 99.66 8.0 False None None False None False 797.28 0 3295765 114664 None 2.78.3 B195 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022)B195C PPR Male Threaded Elbow 25X1/2mm Nos 119.11 119.11 8.0 False None None False None False 952.88 0 3295766 114664 None 2.78.5 B195 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B195E PPR Male Threaded Elbow 32X1/2mm No 158.0 158.0 3.0 False None None False None False 474.0 0 3295767 114664 None 2.77.2 B194 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B194B PPR Female Threaded Elbow 20X1/2mm Nos 68.06 68.06 8.0 False None None False None False 544.48 0 3295768 114664 None 2.77.3 B194 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B194C PPR Female Threaded Elbow 25X1/2mm Nos 85.08 85.08 8.0 False None None False None False 680.64 0 3295769 114664 None 2.77.5 B194 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B194E PPR Female Threaded Elbow 32X1/2mm Nos 136.12 136.12 3.0 False None None False None False 408.36 0 3295770 114664 None 2.76.2 B193 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B193B PPR Male Threaded TEE 20X1/2mm Nos 111.82 111.82 6.0 False None None False None False 670.92 0 3295771 114664 None 2.76.3 B193 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B193C PPR Male Threaded TEE 25X1/2mm Nos 123.97 123.97 6.0 False None None False None False 743.82 0 3295772 114664 None 2.76.5 B193 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B193E PPR Male Threaded TEE 32X1/2mm Nos 181.09 181.09 3.0 False None None False None False 543.27 0 3295773 114664 None 2.75.2 B192 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B192B PPR Female Threaded TEE 20X1/2mm Nos 72.92 72.92 6.0 False None None False None False 437.52 0 3295774 114664 None 2.75.3 B192 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B192C PPR Female Threaded TEE 25X1/2mm Nos 89.94 89.94 6.0 False None None False None False 539.64 0 3295775 114664 None 2.75.5 B192 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 (REFER 2ND CORRIGENDUM FOR VOLUME SR 07-06-2022) B192E PPR Female Threaded TEE 32X1/2mm Nos 144.63 144.63 3.0 False None None False None False 433.89 0 3295776 114664 None 13.34 13.34 Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(REFER 1st Corrigendum and Addendum order - 21-04-2022) l 10.94 10.94 2000.0 False None None False None False 21880.0 0 3295777 114664 None 13.6.4.1 13.6.4.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore-HORIZONTAL Nos 1654.16 1654.16 5.0 False None None False None False 8270.8 0 3295778 114664 None 13.3.1 13.3.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Nos 370.7 370.7 6.0 False None None False None False 2224.2 0 3295779 114664 None 13.6.2.2 13.6.2.2Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Nos 1124.25 1124.25 5.0 False None None False None False 5621.25 0 3295780 114664 None 1.6.1 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m Cum 588.25 588.25 11.81 False None None False None False 6947.2325 0 3295781 114664 None 633 1161 5899 Poly Propylene Random Co-ploymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m Mtr 463.07 463.07 25.0 False None None False None False 11576.75 0 3295782 114664 None 14.3.1 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (SHOWER) Nos 7264.45 7264.45 2.0 False None None False None False 14528.9 0 3295783 114664 None 14.7.3 14.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Nos 3483.34 3483.34 2.0 False None None False None False 6966.68 0 3295784 114664 None 14.40.2 14.40.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 g. Nos 602.84 602.84 2.0 False None None False None False 1205.68 0 3295785 114664 None 13.46 13.46 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75mm outlet, hubless centrifugally cast (spun) iron epoxy coated inside and outside IS: 15905 (REFER 1st Corrigendum and Addendum order - 21-04-2022) Each 577.32 577.32 2.0 False None None False None False 1154.64 0 3295786 114664 None K030 D K030 D Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 :3.4 K030D HDPE Grade PE80-PN10.0,110mm dia m 490. m 790.01 790.01 75.0 False None None False None False 59250.75 0 3295787 114664 None T-130A T-130A Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover Nos 5822.98 5822.98 5.0 False None None False None False 29114.9 0 3295788 114664 None T-130C T-130C Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Nos 5148.43 5148.43 5.0 False None None False None False 25742.15 0 3295789 114664 None 13.31.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 20mm nominal OD pipes(REFER 1st Corrigendum and Addendum order - 21-04-2022) m 460.64 460.64 25.0 False None None False None False 11516.0 0 3295790 114664 None 13.31.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 25mm nominal OD pipes(REFER 1st Corrigendum and Addendum order - 21-04-2022) m 359.76 359.76 25.0 False None None False None False 8994.0 0 3295791 114664 None 1171 1171 3713 PVC pipe - OD 110mm and 6 Kg/sqcm m m 309.93 309.93 15.0 False None None False None False 4648.95 0 3295792 114664 None 1204 680 PVC pipes of 8 Kg/cm2 for 75mm(0.917)m (VOL -5 , PAGE NO-A-45). m 172.59 172.59 30.0 False None None False None False 5177.7 0 3295793 114664 None 7.6 M100F M100 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 7.6 M100F 75 mm dia PVC Elbows Each 233.36 233.36 35.0 False None None False None False 8167.6 0 3295794 114664 None 7.8M100H M100 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 7.8 M100H 110 mm dia PVC Elbows Each 367.05 367.05 20.0 False None None False None False 7341.0 0 3295795 114664 None 14.31 14.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1482.79 1482.79 2.0 False None None False None False 2965.58 0 1718451133000 0 None None Buildings SUMP TANK & SEPTIK TANK & SOAK PIT 329544.67 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3295796 114665 None 1.14.1 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 123.97 123.97 16.07 False None None False None False 1992.1979 0 3295797 114665 None 1.23 6.4 Providing and Filling in foundation with granite I trap broken metal 1OOmm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. specification. VOLUME 2 Cum 3259.7 3259.7 0.9 False None None False None False 2933.73 0 3295798 114665 None 2.1.3 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 7279.03 7279.03 1.37 False None None False None False 9972.2711 0 3295799 114665 None 6.2 6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9696.46 9696.46 1.1 False None None False None False 10666.106 0 3295800 114665 None 8.2.2 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 339.1 339.1 33.0 False None None False None False 11190.3 0 3295801 114665 None 8.12 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. Kgs 77.79 77.79 33.0 False None None False None False 2567.07 0 3295802 114665 None 8.11 8.11 Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 69.28 69.28 33.0 False None None False None False 2286.24 0 3295803 114665 None 2.5.1 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8058.1 8058.1 5.87 False None None False None False 47301.047 0 3295804 114665 None 2.5.1 FORMWORK FOR Sump & Septic Tank @ 35 % of the rate of above concrete item : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 2820.34 2820.34 5.87 False None None False None False 16555.3958 0 3295805 114665 None 2.11 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings Tonne 108726.04 108726.04 1.38 False None None False None False 150041.9352 0 3295806 114665 None 1 8 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 2384.61 2384.61 1.0 False None None False None False 2384.61 0 3295807 114665 None 15.6 15.6 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification. Sqm 616.21 616.21 30.6 False None None False None False 18856.026 0 3295808 114665 None 17.1 17.1 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1217.83 1217.83 2.36 False None None False None False 2874.0788 0 3295809 114665 None 000 40 mm down size A-38 (volume 1) Cum 1446.33 1446.33 1.57 False None None False None False 2270.7381 0 3295810 114665 None 000 20 mm down size A-38 (volume 1) Cum 1620.13 1620.13 1.57 False None None False None False 2543.6041 0 3295811 114665 None 17.3 17.3 Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (Volume 2) Cum 1448.76 1448.76 1.57 False None None False None False 2274.5532 0 3295812 114665 None 17.13 Providing and laying 100mm thick side wall & bottom slab and of 600mm width for drain with opening using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 150mm spacing jointed in CM 1:3 proportion and nicely finished Including providing holes in the walls wherever necessary including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. m 6820.82 6820.82 6.28 False None None False None False 42834.7496 0 1718451133000 0 None None Buildings ELECTRICAL WORK 148557.28 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3295813 114666 None 1.1.1 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick m 81.42 81.42 130.0 False None None False None False 10584.6 0 3295814 114666 None 1.1.2 Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick m 95.58 95.58 80.0 False None None False None False 7646.4 0 3295815 114666 None 1.3.1 Supplying heavy gauge PVCConduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick m 80.24 80.24 40.0 False None None False None False 3209.6 0 3295816 114666 None 1.3.2 Supplying heavy gauge PVCConduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick m 93.22 93.22 20.0 False None None False None False 1864.4 0 3295817 114666 None 1.5 Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box Each 57.82 57.82 19.0 False None None False None False 1098.58 0 3295818 114666 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 66.08 66.08 5.0 False None None False None False 330.4 0 3295819 114666 None 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall m 34.22 34.22 20.0 False None None False None False 684.4 0 3295820 114666 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook. Nos 138.06 138.06 5.0 False None None False None False 690.3 0 3295821 114666 None 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 317.42 317.42 5.0 False None None False None False 1587.1 0 3295822 114666 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 447.22 447.22 9.0 False None None False None False 4024.98 0 3295823 114666 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 654.9 654.9 12.0 False None None False None False 7858.8 0 3295824 114666 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 m 30.68 30.68 175.0 False None None False None False 5369.0 0 3295825 114666 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 m 49.56 49.56 160.0 False None None False None False 7929.6 0 3295826 114666 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 m 74.34 74.34 180.0 False None None False None False 13381.2 0 3295827 114666 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 Way Each 162.84 162.84 4.0 False None None False None False 651.36 0 3295828 114666 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way Each 259.6 259.6 4.0 False None None False None False 1038.4 0 3295829 114666 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way Each 376.42 376.42 3.0 False None None False None False 1129.26 0 3295830 114666 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Each 161.66 161.66 4.0 False None None False None False 646.64 0 3295831 114666 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 276.12 276.12 4.0 False None None False None False 1104.48 0 3295832 114666 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 405.92 405.92 3.0 False None None False None False 1217.76 0 3295833 114666 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 120.36 120.36 40.0 False None None False None False 4814.4 0 3295834 114666 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 201.78 201.78 16.0 False None None False None False 3228.48 0 3295835 114666 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 421.26 421.26 5.0 False None None False None False 2106.3 0 3295836 114666 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 212.4 212.4 1.0 False None None False None False 212.4 0 3295837 114666 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 278.48 278.48 1.0 False None None False None False 278.48 0 3295838 114666 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 184.08 184.08 1.0 False None None False None False 184.08 0 3295839 114666 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A Each 473.18 473.18 3.0 False None None False None False 1419.54 0 3295840 114666 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 489.7 489.7 10.0 False None None False None False 4897.0 0 3295841 114666 None 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3295842 114666 None 5.19.6 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way SP & N Each 1798.32 1798.32 1.0 False None None False None False 1798.32 0 3295843 114666 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N Each 2748.22 2748.22 1.0 False None None False None False 2748.22 0 3295844 114666 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model Each 3521.12 3521.12 5.0 False None None False None False 17605.6 0 3295845 114666 None 8.3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. m 51.92 51.92 50.0 False None None False None False 2596.0 0 3295846 114666 None 11.3.2 Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 - 20/22 W Each 814.2 814.2 19.0 False None None False None False 15469.8 0 3295847 114666 None 12.58 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 4141.8 4141.8 1.0 False None None False None False 4141.8 0 3295848 114666 None 12.58.2 GI/Copper strips 25 x 3 mm GI strip m 96.76 96.76 10.0 False None None False None False 967.6 0 3295849 114666 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders Each 143.96 143.96 19.0 False None None False None False 2735.24 0 3295850 114666 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 5.0 False None None False None False 1008.9 0 3295851 114666 None 8.1 Supplying and drawing UTP-CAT 6E LAN cable. m 44.84 44.84 100.0 False None None False None False 4484.0 0 3295852 114666 None 8.2.1 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 1Pair m 17.7 17.7 50.0 False None None False None False 885.0 0 3295853 114666 None 8.10.1 Supplying & fixing of I/O socket with back box Single I/O Each 578.2 578.2 4.0 False None None False None False 2312.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718451134000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718451134000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory. None 1718451134000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1718451134000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1718451134000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718523412000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1718523419000 0 None None ELIGIBILITY Tender invited only for eligible contractors registered under Karnataka Public Works Dept None 1718523423000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1718523429000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid. None 1718523434000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thiry first day of March of succeeding year(both days inclusive) None 1718523439000 0 None None ELIGIBILITY All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original. None 1718523443000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder. None 1718523449000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason None 1718523453000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal None 1718523457000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1718523463000 0 None None ELIGIBILITY All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work. None 1718523467000 0 None None ELIGIBILITY The items quoted shall include cost of Royalty charges on constructive materials and other taxes as per the rates prevailing Govt. Orders at the time of execution and including all the cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machinary and equipments, etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work. None 1718523472000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders None 1718523478000 0 None None ELIGIBILITY All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose. None 1718523482000 0 None None ELIGIBILITY Physical quantities requirement to qualify the Tenderer is 80% of the estimated quantity as per Govt Order No. .PW/630/CRM/2014 Bangalore Dated: 17-11-2014 None 1718523487000 0 None None ELIGIBILITY Department will not supply any materials. None 1718523499000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable. None 1718523503000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Belagavi during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned. None 1718523507000 0 None None ELIGIBILITY The Tenderer must be present during opening of tender and submit uploaded documents duly attested by Gazzeted Officer not below the rank of Executive Engineer and also produce original documents for confirmation at the time of opening. None 1718523514000 0 None None ELIGIBILITY The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 in respect of the employees engaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund. None 1718523519000 0 None None ELIGIBILITY As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund. None 1718523523000 0 None None ELIGIBILITY THE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA. ANY JUNK, SUPERFLUOS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTED. None 1718523529000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1718523534000 0 None None ELIGIBILITY The item rates are inclusive of all other charges. None 1718523539000 0 None None ELIGIBILITY Under this contract, the GST is included in the item wise basic rates, the rates quoted by the Contractor shall be deemed to be inclusive of GST. None 1718523549000 0 None None ELIGIBILITY The contractor shall quote the rates with adding GST for either materials, labours or works contract (Service). GST will not be paid separately to the contractor under this work. None 1718523554000 0 None None ELIGIBILITY The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time. None 1718523560000 0 None None ELIGIBILITY Financial turover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria None 1718523567000 0 None None ELIGIBILITY The Project Completion period is 06 (Six) months and the Tenderer should maintain work during the defect liability period, which is (1) One year after successful completion of the work. (including Monsoon). None 1718523572000 0 None None ELIGIBILITY Appeal - As per the Govt. ltr no 572/CRM/2020/PWD-COMM-1-PWD-SEC, dated 09.10.2020 the Appeals received in e-procurement as per KTPP Act / Rules within the stipulated time will only be considered. Any written Appeal Received shall not be considered. None 1718523578000 0 None None ELIGIBILITY The tenderer should be a KPWD registered Class-III and Above Contractor None 1718523583000 0 None None ELIGIBILITY Unique Document Identification Number (UDIN) for Practicing Chartered Account is Preffered None 1718523587000 0 None None ELIGIBILITY Since this work is approved under H/A 8443 Deposit contribution, excess amount on the amount put to tender is not allowed, such of the tenders which are above the amount put to tender are liable to rejected. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years Period i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 achieved in at least one financial years an average financial turnover of Rs. 49.20 Lakhs (in all classes of civil engineering construction works only) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The Tenderer shall obtain the similar work done Any Construction work certificate within the financial years of 2019-20 to 2023-24 (25% of the Amount Put to Tender) i.e., Rs. 12.30 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to (AxNx5.00 - B) A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. 0.50 Year where B equal to Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.50 Year form the probable date of Award of this contract. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Calculation Sheet on letter head None None None None Assessed Tender Capacity shall be more than the Tendered Amount Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessment on the Letter Head of the Tenderer None None None None Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Biodata of the personnel None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Statement of value of civl engineering works executed and payments received in the last five years (year-wise) None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Formats enclosed with this NIT None None None None List of works for which tenders already submitted Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Formats enclosed with this NIT None None None None Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Auditors Report None None None None The EMD of Rs.49,200.00 shall be paid in full through e-payment in favour of Executive Engineer, PWD Belagavi Division, Belagavi Others emd createdTs version createdDate modifiedDate documentName None None None None Others -- Through e-payment None None None None The tenderer should be a KPWD registered Class-III and Above Contractor Others PWD Registration Certificate createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers and Bankers Others Bankers Address createdTs version createdDate modifiedDate documentName None None None None Others -- Information on the Letter Head of the tenderer None None None None Information on litigation in which the Tenderer is involved Others Litigation createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 10
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate from CA from 2019-20 to 2023-24 True Technical Bid The tenderer should be a KPWD registered Class-III and Above Contractor True Technical Bid Work done certificate for similar nature of Work from Competant authority Rank of Executive Engineer & above True Technical Bid Name and Address of Contractor for Communication True Technical Bid Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste reserved category as prescribed in the tender document. True Technical Bid The Contractor belonging to the Scheduled Caste/Scheduled Tribe shall be DOMICILE of the State of Karnataka for more than 10 years and shall up load Residential / Domicile Certificate issued by the competent Authority. True Technical Bid UDIN is Preffered True Technical Bid List of ongoing works/ Works in Hand True Technical Bid Bid capacity on Letter head True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None