| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi of Belagavi District-GROUND FLOOR | 9580075.96 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273835 | 113545 | None | PWD SR 23-24Vol-1 Page no 8 Item no 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.
In all kinds of soils upto 300 mm depth ---- including cost of all materials, labor ,HOM,l | Cum | 115.46 | 115.46 | 144.0 | False | None | None | False | None | False | 16626.24 | 0 | | 3273836 | 113545 | None | PWD SR 23-24Vol-1 Page no 8 Item no 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m ---- including cost of all materials, labor ,HOM,l | Cum | 123.97 | 123.97 | 317.31 | False | None | None | False | None | False | 39336.9207 | 0 | | 3273837 | 113545 | None | PWD SR 23-24Vol-2 Page no 5 Item no 4.1 | 4.0 ANTI-TERMITE TREATMENT
4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 143.42 | 143.42 | 480.0 | False | None | None | False | None | False | 68841.6 | 0 | | 3273838 | 113545 | None | PWD SR 23-24Vol-1 Page no 15 Item no 2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)
2.1.3 Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 7279.03 | 7279.03 | 67.95 | False | None | None | False | None | False | 494610.0885 | 0 | | 3273839 | 113545 | None | PWD SR 23-24Vol-1 Page no 15 Item no 2.2.3 | 2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)
2.2.3 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 7700.77 | 7700.77 | 73.08 | False | None | None | False | None | False | 562772.2716 | 0 | | 3273840 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 1a | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8% ---- including cost of all materials, labor ,HOM,l | Cum | 616.07 | 616.07 | 27.09 | False | None | None | False | None | False | 16689.3363 | 0 | | 3273841 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 1b | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (b) All other types " at 3% ---- including cost of all materials, labor ,HOM,l | Cum | 231.02 | 231.02 | 45.978 | False | None | None | False | None | False | 10621.83756 | 0 | | 3273842 | 113545 | None | PWD SR 23-24Vol-1 Page no 16 Item no 2.3.2 | 2.3 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)
2.3.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 7875.79 | 7875.79 | 29.41 | False | None | None | False | None | False | 231626.9839 | 0 | | 3273843 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 2 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l | Cum | 3937.9 | 3937.9 | 23.14 | False | None | None | False | None | False | 91123.006 | 0 | | 3273844 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 4 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For ement Concrete Drain Walls " at 35% ---- including cost of all materials, labor ,HOM,l | Cum | 2756.53 | 2756.53 | 1.16 | False | None | None | False | None | False | 3197.5748 | 0 | | 3273845 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 9 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Columns/Shaft(Slip Centering) " at 70% ---- including cost of all materials, labor ,HOM,l | Cum | 5513.05 | 5513.05 | 5.11 | False | None | None | False | None | False | 28171.6855 | 0 | | 3273846 | 113545 | None | PWD SR 23-24Vol-1 Page no 17 Item no 2.5.2 | 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)
2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 8316.98 | 8316.98 | 105.82 | False | None | None | False | None | False | 880102.8236 | 0 | | 3273847 | 113545 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 9 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Columns/Shaft(Slip Centering) " at 70% ---- including cost of all materials, labor ,HOM,l | Cum | 5821.88 | 5821.88 | 11.4941 | False | None | None | False | None | False | 66917.270908 | 0 | | 3273848 | 113545 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 14 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Beams, Lintels & Troughs of Aqueducts " at 60% ---- including cost of all materials, labor ,HOM,l | Cum | 4990.18 | 4990.18 | 30.1251 | False | None | None | False | None | False | 150329.671518 | 0 | | 3273849 | 113545 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 15 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l | Cum | 4158.5 | 4158.5 | 62.016 | False | None | None | False | None | False | 257893.536 | 0 | | 3273850 | 113545 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 19 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- including cost of all materials, labor ,HOM,l | Cum | 3742.64 | 3742.64 | 2.0693 | False | None | None | False | None | False | 7744.644952 | 0 | | 3273851 | 113545 | None | PWD SR 23-24Vol-2 Page no 9 Item no 5.1.1 | 5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: 5.1.1 Cement mortar 1:6 (1 cement: 6 coarse sand) ---- including cost of all materials, labor ,HOM,l | Cum | 6819.61 | 6819.61 | 42.72 | False | None | None | False | None | False | 291333.7392 | 0 | | 3273852 | 113545 | None | PWD SR 23-24Vol-1 Page no 7 Item no 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- including cost of all materials, labor ,HOM,l | Cum | 323.3 | 323.3 | 280.3 | False | None | None | False | None | False | 90620.99 | 0 | | 3273853 | 113545 | None | PWD SR 23-24Vol-2 Page no 14 Item no 6.8 | 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l | Cum | 9685.52 | 9685.52 | 48.89 | False | None | None | False | None | False | 473525.0728 | 0 | | 3273854 | 113545 | None | PWD SR 23-24Vol-2 Page no 14 Item no 6.15 | 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l | Sqm | 1255.51 | 1255.51 | 19.73 | False | None | None | False | None | False | 24771.2123 | 0 | | 3273855 | 113545 | None | PWD SR 23-24Vol-2 Page no 18 Item no 2.11a | 2.11 Steel Fabrication. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(a) Buildings ---- including cost of all materials, labor ,HOM,l | t | 108726.04 | 108726.04 | 27.09 | False | None | None | False | None | False | 2945388.4236 | 0 | | 3273856 | 113545 | None | PWD SR 23-24Vol-2 Page no 100 Item no 12.13.1 | 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Cum | 120099.75 | 120099.75 | 0.42 | False | None | None | False | None | False | 50441.895 | 0 | | 3273857 | 113545 | None | PWD SR 23-24Vol-2 Page no 100 Item no 12.15 | 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) ---- including cost of all materials, labor ,HOM,l | Sqm | 9047.44 | 9047.44 | 7.0 | False | None | None | False | None | False | 63332.08 | 0 | | 3273858 | 113545 | None | PWD SR 23-24Vol-2 Page no 101 Item no 12.27 | 12.27 Providing and fixing in position fully panelled shutters of Honne wood for windows with stiles and rails of 30mm thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) ---- including cost of all materials, labor ,HOM,l | Sqm | 8143.18 | 8143.18 | 4.7 | False | None | None | False | None | False | 38272.946 | 0 | | 3273859 | 113545 | None | PWD SR 23-24Vol-2 Page no 104 Item no 12.51 | 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | No | 1234.85 | 1234.85 | 2.0 | False | None | None | False | None | False | 2469.7 | 0 | | 3273860 | 113545 | None | PWD SR 23-24Vol-2 Page no 104 Item no 12.52 | 12.52 Fixing of window frame in an existing opening including embedding frame in floorand walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | No | 939.5 | 939.5 | 2.0 | False | None | None | False | None | False | 1879.0 | 0 | | 3273861 | 113545 | None | PWD SR 23-24Vol-2 Page no 112 Item no 12.96 | 12.96 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and choped mat. door frame laminate shall be 2mm thick and shall be filed with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides M.S stay shall be provided at the bottom to steady the frame ---- including cost of all materials, labor ,HOM,l | m | 781.5 | 781.5 | 3.2 | False | None | None | False | None | False | 2500.8 | 0 | | 3273862 | 113545 | None | PWD SR 23-24Vol-2 Page no 31 Item no 12.97.2 | Providing and fixing to existing door fames.
Fiber Glass Reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire resistant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hallow rails and stales, with wooden frame and suitable blocks of reasoned wood inside at requird places for foxing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to IS 14856, including fixing to frame.
12.97.2 35 mm thickness ---- including cost of all materials, labor ,HOM,l | Sqm | 4417.98 | 4417.98 | 2.25 | False | None | None | False | None | False | 9940.455 | 0 | | 3273863 | 113545 | None | PWD SR 23-24Vol-2 Page no 86 Item no 11.34B | 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. ---- including cost of all materials, labor ,HOM,l | Kg | 222.42 | 222.42 | 741.51 | False | None | None | False | None | False | 164926.6542 | 0 | | 3273864 | 113545 | None | PWD SR 23-24Vol-2 Page no 110 Item no 12.90 | 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- including cost of all materials, labor ,HOM,l | Sqm | 8184.5 | 8184.5 | 27.75 | False | None | None | False | None | False | 227119.875 | 0 | | 3273865 | 113545 | None | PWD SR 23-24Vol-2 Page no 109 Item no 12.85 | 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- including cost of all materials, labor ,HOM,l | Sqm | 6950.87 | 6950.87 | 1.74 | False | None | None | False | None | False | 12094.5138 | 0 | | 3273866 | 113545 | None | PWD SR 23-24Vol-2 Page no 42 Item no 8.9 | 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 467.93 | 467.93 | 277.69 | False | None | None | False | None | False | 129939.4817 | 0 | | 3273867 | 113545 | None | PWD SR 23-24Vol-2 Page no 41 Item no 8.1.1 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 309.93 | 309.93 | 448.92 | False | None | None | False | None | False | 139133.7756 | 0 | | 3273868 | 113545 | None | PWD SR 23-24Vol-2 Page no 50 Item no 8.51 | 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 121.54 | 121.54 | 596.39 | False | None | None | False | None | False | 72485.2406 | 0 | | 3273869 | 113545 | None | PWD SR 23-24Vol-2 Page no 60 Item no 9.12.2 | 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.
9.12.2 Size of Tile 600x600 mm ---- including cost of all materials, labor ,HOM,l | Sqm | 1391.63 | 1391.63 | 119.72 | False | None | None | False | None | False | 166605.9436 | 0 | | 3273870 | 113545 | None | PWD SR 23-24Vol-3 Page no 51 Item no 6.8.2 | 6.8.2 IRC SP 63:2018 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) ---- including cost of all materials, labor ,HOM,l | Sqm | 1411.08 | 1411.08 | 198.0 | False | None | None | False | None | False | 279393.84 | 0 | | 3273871 | 113545 | None | PWD SR 23-24Vol-2 Page no 64 Item no 9.30 | 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 6475.65 | 6475.65 | 124.04 | False | None | None | False | None | False | 803239.626 | 0 | | 3273872 | 113545 | None | PWD SR 23-24Vol-2 Page no 60 Item no 9.10 | 9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. ---- including cost of all materials, labor ,HOM,l | Sqm | 1344.23 | 1344.23 | 6.25 | False | None | None | False | None | False | 8401.4375 | 0 | | 3273873 | 113545 | None | PWD SR 23-24Vol-2 Page no 65 Item no 9.38 | 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 1691.84 | 1691.84 | 70.65 | False | None | None | False | None | False | 119528.496 | 0 | | 3273874 | 113545 | None | PWD SR 23-24Vol-2 Page no 46 Item no 8.33.2 | 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 167.73 | 167.73 | 24.31 | False | None | None | False | None | False | 4077.5163 | 0 | | 3273875 | 113545 | None | PWD SR 23-24Vol-2 Page no 47 Item no 8.33.3 | 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 168.94 | 168.94 | 35.31 | False | None | None | False | None | False | 5965.2714 | 0 | | 3273876 | 113545 | None | PWD SR 23-24Vol-2 Page no 47 Item no 8.35.2 | 8.35.2 Painting with silicon & acrylic emulsion-based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 240.65 | 240.65 | 596.38 | False | None | None | False | None | False | 143518.847 | 0 | | 3273877 | 113545 | None | PWD SR 23-24Vol-2 Page no 46 Item no 8.30 | 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 211.48 | 211.48 | 277.7 | False | None | None | False | None | False | 58727.996 | 0 | | 3273878 | 113545 | None | PWD SR 23-24Vol-2 Page no 85 Item no 11.28 | 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of
the Engineer-in-Charge. ---- including cost of all materials, labor ,HOM,l | Kg | 686.7 | 686.7 | 166.05 | False | None | None | False | None | False | 114026.535 | 0 | | 3273879 | 113545 | None | PWD SR 23-24Vol-2 Page no 122 Item no 13.31.3 | 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal dia Pipes ---- including cost of all materials, labor ,HOM,l | m | 386.5 | 386.5 | 150.0 | False | None | None | False | None | False | 57975.0 | 0 | | 3273880 | 113545 | None | PWD SR 23-24Vol-2 Page no 128 Item no 13.64.2 | 13.64 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
13.64.2 110mm nominal dia pipes ---- including cost of all materials, labor ,HOM,l | m | 467.93 | 467.93 | 75.0 | False | None | None | False | None | False | 35094.75 | 0 | | 3273881 | 113545 | None | PWD SR 23-24Vol-2 Page no 133 Item no 14.10.1.1 | 14.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
14.10.1 Kitchen sink with drain board
14.10.1.1 510x1040 mm bowl depth 250 mm ---- including cost of all materials, labor ,HOM,l | Each | 6828.12 | 6828.12 | 4.0 | False | None | None | False | None | False | 27312.48 | 0 | | 3273882 | 113545 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.17.4 | 13.17 Providing and fixing PTMT bib cock of approved quality and colour
13.17.4 15 mm nominal bore, 90 mm long, ---- including cost of all materials, labor ,HOM,l | No | 294.13 | 294.13 | 10.0 | False | None | None | False | None | False | 2941.3 | 0 | | 3273883 | 113545 | None | PWD SR 23-24Vol-2 Page no 127 Item no 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- including cost of all materials, labor ,HOM,l | No | 267.39 | 267.39 | 10.0 | False | None | None | False | None | False | 2673.9 | 0 | | 3273884 | 113545 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.18.1 | 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- including cost of all materials, labor ,HOM,l | No | 159.22 | 159.22 | 10.0 | False | None | None | False | None | False | 1592.2 | 0 | | 3273885 | 113545 | None | codeVol-5 Page no 191 Item no 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- including cost of all materials, labor ,HOM,l | No | 6628.79 | 6628.79 | 5.0 | False | None | None | False | None | False | 33143.95 | 0 | | 3273886 | 113545 | None | codeVol-5 Page no 221 Item no 18.3 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | No | 2384.61 | 2384.61 | 5.0 | False | None | None | False | None | False | 11923.05 | 0 | | 3273887 | 113545 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.59 | 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 1353.96 | 1353.96 | 5.0 | False | None | None | False | None | False | 6769.8 | 0 | | 3273888 | 113545 | None | PWD SR 23-24Vol-2 Page no 106 Item no 12.69.2 | 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.
12.69.2 125mm ---- including cost of all materials, labor ,HOM,l | No | 295.34 | 295.34 | 18.0 | False | None | None | False | None | False | 5316.12 | 0 | | 3273889 | 113545 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.58 | 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 145.85 | 145.85 | 50.0 | False | None | None | False | None | False | 7292.5 | 0 | | 3273890 | 113545 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.65 | 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 71.71 | 71.71 | 18.0 | False | None | None | False | None | False | 1290.78 | 0 | | 3273891 | 113545 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.61 | 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 1203.25 | 1203.25 | 9.0 | False | None | None | False | None | False | 10829.25 | 0 | | 3273892 | 113545 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.63 | 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- including cost of all materials, labor ,HOM,l | No | 158.0 | 158.0 | 18.0 | False | None | None | False | None | False | 2844.0 | 0 | | 3273893 | 113545 | None | PWD SR 23-24Vol-2 Page no 107 Item no 12.72 | 12.72 Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
(Barrel type) with necessary screws etc. complete : ---- including cost of all materials, labor ,HOM,l | No | 99.66 | 99.66 | 18.0 | False | None | None | False | None | False | 1793.88 | 0 | | 3273894 | 113545 | None | PWD SR 23-24Vol-2 Page no 107 Item no 12.73.1 | 12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
12.73.1 125mm ---- including cost of all materials, labor ,HOM,l | No | 53.48 | 53.48 | 19.0 | False | None | None | False | None | False | 1016.12 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi of Belagavi District-FIRST FLOOR | 8243484.11 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273895 | 113546 | None | PWD SR 23-24Vol-1 Page no 17 Item no 2.5.2 | 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)
2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 8400.15 | 8400.15 | 104.83 | False | None | None | False | None | False | 880587.7245 | 0 | | 3273896 | 113546 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 9 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Columns/Shaft(Slip Centering) " at 70% ---- including cost of all materials, labor ,HOM,l | Cum | 5880.11 | 5880.11 | 11.85 | False | None | None | False | None | False | 69679.3035 | 0 | | 3273897 | 113546 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 14 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Beams, Lintels & Troughs of Aqueducts " at 60% ---- including cost of all materials, labor ,HOM,l | Cum | 5040.09 | 5040.09 | 31.18 | False | None | None | False | None | False | 157150.0062 | 0 | | 3273898 | 113546 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 19 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- including cost of all materials, labor ,HOM,l | Cum | 3780.07 | 3780.07 | 2.08 | False | None | None | False | None | False | 7862.5456 | 0 | | 3273899 | 113546 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 15 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l | Cum | 4200.08 | 4200.08 | 59.69 | False | None | None | False | None | False | 250702.7752 | 0 | | 3273900 | 113546 | None | PWD SR 23-24Vol-2 Page no 14 Item no 6.8 | 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l | Cum | 9782.38 | 9782.38 | 71.64 | False | None | None | False | None | False | 700809.7032 | 0 | | 3273901 | 113546 | None | PWD SR 23-24Vol-2 Page no 14 Item no 6.15 | 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l | Sqm | 1268.06 | 1268.06 | 64.89 | False | None | None | False | None | False | 82284.4134 | 0 | | 3273902 | 113546 | None | PWD SR 23-24Vol-2 Page no 44 Item no 8.16a | 8.16a Providing Lathe plaster with cement mortar 1:3 5cm thick with 6mm dai mild steel bars at 20cm center to center both horizontly, vertically fixed with chicken mesh for drop chejja, facia, backing to cup boards including cost of materials , labour providing and removing formwork usage charges, curing complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 1519.71 | 1519.71 | 22.27 | False | None | None | False | None | False | 33843.9417 | 0 | | 3273903 | 113546 | None | PWD SR 23-24Vol-2 Page no 18 Item no 2.11a | 2.11 Steel Fabrication. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(a) Buildings ---- including cost of all materials, labor ,HOM,l | t | 109813.3 | 109813.3 | 16.49 | False | None | None | False | None | False | 1810821.317 | 0 | | 3273904 | 113546 | None | PWD SR 23-24Vol-2 Page no 100 Item no 12.13.1 | 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Cum | 121300.74 | 121300.74 | 0.72 | False | None | None | False | None | False | 87336.5328 | 0 | | 3273905 | 113546 | None | PWD SR 23-24Vol-2 Page no 100 Item no 12.15 | 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) ---- including cost of all materials, labor ,HOM,l | Sqm | 9137.91 | 9137.91 | 19.0 | False | None | None | False | None | False | 173620.29 | 0 | | 3273906 | 113546 | None | PWD SR 23-24Vol-2 Page no 104 Item no 12.51 | 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | No | 1247.19 | 1247.19 | 7.0 | False | None | None | False | None | False | 8730.33 | 0 | | 3273907 | 113546 | None | PWD SR 23-24Vol-2 Page no 77 Item no 11.4 | 11.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 6409.06 | 6409.06 | 4.5 | False | None | None | False | None | False | 28840.77 | 0 | | 3273908 | 113546 | None | PWD SR 23-24Vol-2 Page no 112 Item no 12.96 | 12.96 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and choped mat. door frame laminate shall be 2mm thick and shall be filed with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides M.S stay shall be provided at the bottom to steady the frame ---- including cost of all materials, labor ,HOM,l | m | 789.31 | 789.31 | 38.5 | False | None | None | False | None | False | 30388.435 | 0 | | 3273909 | 113546 | None | PWD SR 23-24Vol-2 Page no 31 Item no 12.97.2 | Providing and fixing to existing door fames.
Fiber Glass Reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire resistant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hallow rails and stales, with wooden frame and suitable blocks of reasoned wood inside at requird places for foxing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to IS 14856, including fixing to frame.
12.97.2 35 mm thickness ---- including cost of all materials, labor ,HOM,l | Sqm | 4462.16 | 4462.16 | 6.75 | False | None | None | False | None | False | 30119.58 | 0 | | 3273910 | 113546 | None | PWD SR 23-24Vol-2 Page no 110 Item no 12.90 | 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- including cost of all materials, labor ,HOM,l | Sqm | 8266.35 | 8266.35 | 42.75 | False | None | None | False | None | False | 353386.4625 | 0 | | 3273911 | 113546 | None | PWD SR 23-24Vol-2 Page no 109 Item no 12.85 | 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- including cost of all materials, labor ,HOM,l | Sqm | 7020.39 | 7020.39 | 5.52 | False | None | None | False | None | False | 38752.5528 | 0 | | 3273912 | 113546 | None | PWD SR 23-24Vol-2 Page no 86 Item no 11.34B | 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. ---- including cost of all materials, labor ,HOM,l | Kg | 224.64 | 224.64 | 1013.67 | False | None | None | False | None | False | 227710.8288 | 0 | | 3273913 | 113546 | None | PWD SR 23-24Vol-2 Page no 42 Item no 8.9 | 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 472.61 | 472.61 | 266.86 | False | None | None | False | None | False | 126120.7046 | 0 | | 3273914 | 113546 | None | PWD SR 23-24Vol-2 Page no 41 Item no 8.1.1 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 313.03 | 313.03 | 835.76 | False | None | None | False | None | False | 261617.9528 | 0 | | 3273915 | 113546 | None | PWD SR 23-24Vol-2 Page no 60 Item no 9.12.2 | 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.
9.12.2 Size of Tile 600x600 mm ---- including cost of all materials, labor ,HOM,l | Sqm | 1405.55 | 1405.55 | 265.07 | False | None | None | False | None | False | 372569.1385 | 0 | | 3273916 | 113546 | None | PWD SR 23-24Vol-2 Page no 64 Item no 9.30 | 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 6540.41 | 6540.41 | 183.61 | False | None | None | False | None | False | 1200884.6801 | 0 | | 3273917 | 113546 | None | PWD SR 23-24Vol-2 Page no 60 Item no 9.10 | 9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. ---- including cost of all materials, labor ,HOM,l | Sqm | 1357.67 | 1357.67 | 14.4 | False | None | None | False | None | False | 19550.448 | 0 | | 3273918 | 113546 | None | PWD SR 23-24Vol-2 Page no 65 Item no 9.38 | 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- including cost of all materials, labor ,HOM,l | Sqm | 1708.76 | 1708.76 | 172.49 | False | None | None | False | None | False | 294744.0124 | 0 | | 3273919 | 113546 | None | PWD SR 23-24Vol-2 Page no 50 Item no 8.51 | 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 122.76 | 122.76 | 872.14 | False | None | None | False | None | False | 107063.9064 | 0 | | 3273920 | 113546 | None | PWD SR 23-24Vol-2 Page no 46 Item no 8.33.2 | 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 169.4 | 169.4 | 49.4 | False | None | None | False | None | False | 8368.36 | 0 | | 3273921 | 113546 | None | PWD SR 23-24Vol-2 Page no 47 Item no 8.33.3 | 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 170.63 | 170.63 | 48.27 | False | None | None | False | None | False | 8236.3101 | 0 | | 3273922 | 113546 | None | PWD SR 23-24Vol-2 Page no 47 Item no 8.35.2 | 8.35.2 Painting with silicon & acrylic emulsion-based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 243.06 | 243.06 | 872.14 | False | None | None | False | None | False | 211982.3484 | 0 | | 3273923 | 113546 | None | PWD SR 23-24Vol-2 Page no 46 Item no 8.30 | 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l | Sqm | 213.59 | 213.59 | 266.85 | False | None | None | False | None | False | 56996.4915 | 0 | | 3273924 | 113546 | None | PWD SR 23-24Vol-2 Page no 85 Item no 11.28 | 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of
the Engineer-in-Charge. ---- including cost of all materials, labor ,HOM,l | Kg | 693.57 | 693.57 | 333.9 | False | None | None | False | None | False | 231583.023 | 0 | | 3273925 | 113546 | None | PWD SR 23-24Vol-2 Page no 122 Item no 13.31.3 | 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal dia Pipes ---- including cost of all materials, labor ,HOM,l | m | 390.37 | 390.37 | 150.0 | False | None | None | False | None | False | 58555.5 | 0 | | 3273926 | 113546 | None | PWD SR 23-24Vol-2 Page no 128 Item no 13.64.2 | 13.64 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
13.64.2 110mm nominal dia pipes ---- including cost of all materials, labor ,HOM,l | m | 472.61 | 472.61 | 70.0 | False | None | None | False | None | False | 33082.7 | 0 | | 3273927 | 113546 | None | PWD SR 23-24Vol-2 Page no 131 Item no 14.2.1 | 14.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 14.2.1 W.C. pan with ISI marked white solid plastic seat and lid ---- including cost of all materials, labor ,HOM,l | Each | 5938.9 | 5938.9 | 7.0 | False | None | None | False | None | False | 41572.3 | 0 | | 3273928 | 113546 | None | PWD SR 23-24Vol-2 Page no 132 Item no 14.5.1 | 14.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
14.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern ---- including cost of all materials, labor ,HOM,l | Each | 10608.52 | 10608.52 | 4.0 | False | None | None | False | None | False | 42434.08 | 0 | | 3273929 | 113546 | None | PWD SR 23-24Vol-2 Page no 70 Item no 10.8 | 10.8 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. ---- including cost of all materials, labor ,HOM,l | Sqm | 3423.65 | 3423.65 | 1.88 | False | None | None | False | None | False | 6436.462 | 0 | | 3273930 | 113546 | None | PWD SR 23-24Vol-2 Page no 133 Item no 14.10.1.1 | 14.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
14.10.1 Kitchen sink with drain board
14.10.1.1 510x1040 mm bowl depth 250 mm ---- including cost of all materials, labor ,HOM,l | Each | 6896.4 | 6896.4 | 3.0 | False | None | None | False | None | False | 20689.2 | 0 | | 3273931 | 113546 | None | PWD SR 23-24Vol-2 Page no 132 Item no 14.7.1 | 14.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 14.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps ---- including cost of all materials, labor ,HOM,l | Each | 3783.32 | 3783.32 | 5.0 | False | None | None | False | None | False | 18916.6 | 0 | | 3273932 | 113546 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.17.4 | 13.17 Providing and fixing PTMT bib cock of approved quality and colour
13.17.4 15 mm nominal bore, 90 mm long, ---- including cost of all materials, labor ,HOM,l | No | 297.07 | 297.07 | 30.0 | False | None | None | False | None | False | 8912.1 | 0 | | 3273933 | 113546 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.18.1 | 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- including cost of all materials, labor ,HOM,l | No | 160.81 | 160.81 | 100.0 | False | None | None | False | None | False | 16081.0 | 0 | | 3273934 | 113546 | None | PWD SR 23-24Vol-2 Page no 127 Item no 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- including cost of all materials, labor ,HOM,l | No | 270.07 | 270.07 | 15.0 | False | None | None | False | None | False | 4051.05 | 0 | | 3273935 | 113546 | None | PWD SR 23-24Vol-2 Page no 106 Item no 12.69.2 | 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.
12.69.2 125mm ---- including cost of all materials, labor ,HOM,l | No | 298.29 | 298.29 | 24.0 | False | None | None | False | None | False | 7158.96 | 0 | | 3273936 | 113546 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.59 | 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 1367.49 | 1367.49 | 24.0 | False | None | None | False | None | False | 32819.76 | 0 | | 3273937 | 113546 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.58 | 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 147.31 | 147.31 | 48.0 | False | None | None | False | None | False | 7070.88 | 0 | | 3273938 | 113546 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.65 | 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 72.43 | 72.43 | 48.0 | False | None | None | False | None | False | 3476.64 | 0 | | 3273939 | 113546 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.61 | 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l | No | 1215.28 | 1215.28 | 48.0 | False | None | None | False | None | False | 58333.44 | 0 | | 3273940 | 113546 | None | PWD SR 23-24Vol-2 Page no 105 Item no 12.63 | 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- including cost of all materials, labor ,HOM,l | No | 159.58 | 159.58 | 48.0 | False | None | None | False | None | False | 7659.84 | 0 | | 3273941 | 113546 | None | PWD SR 23-24Vol-2 Page no 107 Item no 12.73.1 | 12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
12.73.1 125mm ---- including cost of all materials, labor ,HOM,l | No | 54.01 | 54.01 | 72.0 | False | None | None | False | None | False | 3888.72 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi -SECOND FLOOR | 3272817.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273942 | 113547 | None | PWD SR 23-24Vol-1 Page no 17 Item no 2.5.2 | 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)
2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l | Cum | 8483.32 | 8483.32 | 102.38 | False | None | None | False | None | False | 868522.3016 | 0 | | 3273943 | 113547 | None | PWD SR 23-24Vol-1 Page no 111 Item no Sl no 9 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Columns/Shaft(Slip Centering) " at 70% ---- including cost of all materials, labor ,HOM,l | Cum | 5938.33 | 5938.33 | 11.85 | False | None | None | False | None | False | 70369.2105 | 0 | | 3273944 | 113547 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 14 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For RCC Beams, Lintels & Troughs of Aqueducts " at 60% ---- including cost of all materials, labor ,HOM,l | Cum | 5089.99 | 5089.99 | 28.57 | False | None | None | False | None | False | 145421.0143 | 0 | | 3273945 | 113547 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 19 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- including cost of all materials, labor ,HOM,l | Cum | 3817.5 | 3817.5 | 2.3517 | False | None | None | False | None | False | 8977.61475 | 0 | | 3273946 | 113547 | None | PWD SR 23-24Vol-1 Page no 112 Item no Sl no 15 | Addendum 1-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l | Cum | 4241.66 | 4241.66 | 59.69 | False | None | None | False | None | False | 253184.6854 | 0 | | 3273947 | 113547 | None | PWD SR 23-24Vol-2 Page no 18 Item no 2.11a | 2.11 Steel Fabrication. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(a) Buildings ---- including cost of all materials, labor ,HOM,l | t | 110900.57 | 110900.57 | 17.37 | False | None | None | False | None | False | 1926342.9009 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi -TERRACE FLOOR | 121143.88 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273948 | 113548 | None | PWD SR 23-24Vol-2 Page no 122 Item no 13.31.3 | 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal dia Pipes ---- including cost of all materials, labor ,HOM,l | m | 398.11 | 398.11 | 100.0 | False | None | None | False | None | False | 39811.0 | 0 | | 3273949 | 113548 | None | PWD SR 23-24Vol-2 Page no 128 Item no 13.64.2 | 13.64 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
13.64.2 110mm nominal dia pipes ---- including cost of all materials, labor ,HOM,l | m | 481.98 | 481.98 | 50.0 | False | None | None | False | None | False | 24099.0 | 0 | | 3273950 | 113548 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.17.4 | 13.17 Providing and fixing PTMT bib cock of approved quality and colour
13.17.4 15 mm nominal bore, 90 mm long, ---- including cost of all materials, labor ,HOM,l | No | 302.94 | 302.94 | 2.0 | False | None | None | False | None | False | 605.88 | 0 | | 3273951 | 113548 | None | PWD SR 23-24Vol-2 Page no 120 Item no 13.18.1 | 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- including cost of all materials, labor ,HOM,l | No | 164.0 | 164.0 | 2.0 | False | None | None | False | None | False | 328.0 | 0 | | 3273952 | 113548 | None | PWD SR 23-24Vol-2 Page no 123 Item no 13.34 | 13.34 Providing and placing on terrace(at all floor levels), polyethylene water storage tanks as per IS:12701 marked, withcover and suitable locking arrangements, making necessary holes of suitable diameter for inlet, outlet and overflow pipes, but without fittings and the base support for tank. ---- including cost of all materials, labor ,HOM,l | l | 11.26 | 11.26 | 5000.0 | False | None | None | False | None | False | 56300.0 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi of Belagavi District-ELECTRICAL GROUND FLOOR | 1031173.59 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3273953 | 113549 | None | Item no1.1.1page no2 | Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy
gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 81.42 | 81.42 | 60.0 | False | None | None | False | None | False | 4885.2 | 0 | | 3273954 | 113549 | None | Item no1.1.2page no2 | Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy
gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 95.58 | 95.58 | 30.0 | False | None | None | False | None | False | 2867.4 | 0 | | 3273955 | 113549 | None | Item no1.2.1page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 77.88 | 77.88 | 210.0 | False | None | None | False | None | False | 16354.8 | 0 | | 3273956 | 113549 | None | Item no1.2.2page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3273957 | 113549 | None | Item no1.2.3page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 121.54 | 121.54 | 30.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3273958 | 113549 | None | Item no1.3.1page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 80.24 | 80.24 | 160.0 | False | None | None | False | None | False | 12838.4 | 0 | | 3273959 | 113549 | None | Item no1.3.2page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 93.22 | 93.22 | 210.0 | False | None | None | False | None | False | 19576.2 | 0 | | 3273960 | 113549 | None | Item no1.3.3page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 116.82 | 116.82 | 30.0 | False | None | None | False | None | False | 3504.6 | 0 | | 3273961 | 113549 | None | Item no1.13page no4 | Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost of all materials, labor ,HOM,l | No | 138.06 | 138.06 | 9.0 | False | None | None | False | None | False | 1242.54 | 0 | | 3273962 | 113549 | None | Item no2.2.1page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box ---- including cost of all materials, labor ,HOM,l | Point | 317.42 | 317.42 | 10.0 | False | None | None | False | None | False | 3174.2 | 0 | | 3273963 | 113549 | None | Item no2.2.2page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via
switch box ---- including cost of all materials, labor ,HOM,l | Point | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3273964 | 113549 | None | Item no2.2.3page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via
switch box ---- including cost of all materials, labor ,HOM,l | Point | 654.9 | 654.9 | 60.0 | False | None | None | False | None | False | 39294.0 | 0 | | 3273965 | 113549 | None | Item no2.2.4page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out
let via switches ---- including cost of all materials, labor ,HOM,l | Point | 798.86 | 798.86 | 12.0 | False | None | None | False | None | False | 9586.32 | 0 | | 3273966 | 113549 | None | Item no2.2.5page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Three outlet in a row, above 6Mts upto 10Mtr from tapping point to
out let via switches box ---- including cost of all materials, labor ,HOM,l | Point | 1167.02 | 1167.02 | 3.0 | False | None | None | False | None | False | 3501.06 | 0 | | 3273967 | 113549 | None | Item no2.3.1page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 1 mm2 ---- including cost of all materials, labor ,HOM,l | m | 22.42 | 22.42 | 300.0 | False | None | None | False | None | False | 6726.0 | 0 | | 3273968 | 113549 | None | Item no2.3.2page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 1.5 mm2 ---- including cost of all materials, labor ,HOM,l | m | 30.68 | 30.68 | 400.0 | False | None | None | False | None | False | 12272.0 | 0 | | 3273969 | 113549 | None | Item no2.3.3page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 2.5 mm2 ---- including cost of all materials, labor ,HOM,l | m | 49.56 | 49.56 | 600.0 | False | None | None | False | None | False | 29736.0 | 0 | | 3273970 | 113549 | None | Item no2.3.4page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 4 mm2 ---- including cost of all materials, labor ,HOM,l | m | 74.34 | 74.34 | 300.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3273971 | 113549 | None | Item no2.3.5page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 6 mm2 ---- including cost of all materials, labor ,HOM,l | m | 108.56 | 108.56 | 200.0 | False | None | None | False | None | False | 21712.0 | 0 | | 3273972 | 113549 | None | Item no2.6.2page no7 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2 ---- including cost of all materials, labor ,HOM,l | m | 198.24 | 198.24 | 450.0 | False | None | None | False | None | False | 89208.0 | 0 | | 3273973 | 113549 | None | Item no3.4.1page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-2 Way ---- including cost of all materials, labor ,HOM,l | Each | 162.84 | 162.84 | 2.0 | False | None | None | False | None | False | 325.68 | 0 | | 3273974 | 113549 | None | Item no3.4.2page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way ---- including cost of all materials, labor ,HOM,l | Each | 187.62 | 187.62 | 10.0 | False | None | None | False | None | False | 1876.2 | 0 | | 3273975 | 113549 | None | Item no3.4.3page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way ---- including cost of all materials, labor ,HOM,l | Each | 208.86 | 208.86 | 4.0 | False | None | None | False | None | False | 835.44 | 0 | | 3273976 | 113549 | None | Item no3.4.4page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way ---- including cost of all materials, labor ,HOM,l | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3273977 | 113549 | None | Item no3.4.5page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- including cost of all materials, labor ,HOM,l | Each | 307.98 | 307.98 | 2.0 | False | None | None | False | None | False | 615.96 | 0 | | 3273978 | 113549 | None | Item no3.4.6page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way ---- including cost of all materials, labor ,HOM,l | Each | 376.42 | 376.42 | 2.0 | False | None | None | False | None | False | 752.84 | 0 | | 3273979 | 113549 | None | Item no3.4.7page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way ---- including cost of all materials, labor ,HOM,l | Each | 428.34 | 428.34 | 1.0 | False | None | None | False | None | False | 428.34 | 0 | | 3273980 | 113549 | None | Item no3.4.8page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 18 Way ---- including cost of all materials, labor ,HOM,l | Each | 477.9 | 477.9 | 2.0 | False | None | None | False | None | False | 955.8 | 0 | | 3273981 | 113549 | None | Item no3.5.1page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 1 to 2 Module ---- including cost of all materials, labor ,HOM,l | Each | 161.66 | 161.66 | 2.0 | False | None | None | False | None | False | 323.32 | 0 | | 3273982 | 113549 | None | Item no3.5.2page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 3 Module ---- including cost of all materials, labor ,HOM,l | Each | 189.98 | 189.98 | 10.0 | False | None | None | False | None | False | 1899.8 | 0 | | 3273983 | 113549 | None | Item no3.5.3page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 4 Module ---- including cost of all materials, labor ,HOM,l | Each | 206.5 | 206.5 | 4.0 | False | None | None | False | None | False | 826.0 | 0 | | 3273984 | 113549 | None | Item no3.5.4page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 6 Module ---- including cost of all materials, labor ,HOM,l | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3273985 | 113549 | None | Item no3.5.5page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 8 Module ---- including cost of all materials, labor ,HOM,l | Each | 335.12 | 335.12 | 2.0 | False | None | None | False | None | False | 670.24 | 0 | | 3273986 | 113549 | None | Item no3.5.6page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 10-12 Module ---- including cost of all materials, labor ,HOM,l | Each | 405.92 | 405.92 | 2.0 | False | None | None | False | None | False | 811.84 | 0 | | 3273987 | 113549 | None | Item no3.5.7page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 16 Module ---- including cost of all materials, labor ,HOM,l | Each | 468.46 | 468.46 | 1.0 | False | None | None | False | None | False | 468.46 | 0 | | 3273988 | 113549 | None | Item no3.5.8page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 18 Module ---- including cost of all materials, labor ,HOM,l | Each | 539.26 | 539.26 | 2.0 | False | None | None | False | None | False | 1078.52 | 0 | | 3273989 | 113549 | None | Item no3.6.1page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 120.36 | 120.36 | 80.0 | False | None | None | False | None | False | 9628.8 | 0 | | 3273990 | 113549 | None | Item no3.6.2page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 195.88 | 195.88 | 2.0 | False | None | None | False | None | False | 391.76 | 0 | | 3273991 | 113549 | None | Item no3.6.3page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- including cost of all materials, labor ,HOM,l | Each | 201.78 | 201.78 | 20.0 | False | None | None | False | None | False | 4035.6 | 0 | | 3273992 | 113549 | None | Item no3.6.4page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- including cost of all materials, labor ,HOM,l | Each | 421.26 | 421.26 | 9.0 | False | None | None | False | None | False | 3791.34 | 0 | | 3273993 | 113549 | None | Item no3.6.7page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 212.4 | 212.4 | 6.0 | False | None | None | False | None | False | 1274.4 | 0 | | 3273994 | 113549 | None | Item no3.6.8page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push ---- including cost of all materials, labor ,HOM,l | Each | 208.86 | 208.86 | 1.0 | False | None | None | False | None | False | 208.86 | 0 | | 3273995 | 113549 | None | Item no3.6.9page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- including cost of all materials, labor ,HOM,l | Each | 384.68 | 384.68 | 2.0 | False | None | None | False | None | False | 769.36 | 0 | | 3273996 | 113549 | None | Item no40243page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- including cost of all materials, labor ,HOM,l | Each | 278.48 | 278.48 | 8.0 | False | None | None | False | None | False | 2227.84 | 0 | | 3273997 | 113549 | None | Item no40608page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket ---- including cost of all materials, labor ,HOM,l | Each | 184.08 | 184.08 | 2.0 | False | None | None | False | None | False | 368.16 | 0 | | 3273998 | 113549 | None | Item no40974page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 ---- including cost of all materials, labor ,HOM,l | Each | 397.66 | 397.66 | 2.0 | False | None | None | False | None | False | 795.32 | 0 | | 3273999 | 113549 | None | Item no3.8page no9 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- including cost of all materials, labor ,HOM,l | Sqm | 0.48 | 0.48 | 1000.0 | False | None | None | False | None | False | 480.0 | 0 | | 3274000 | 113549 | None | Item no5.2.1page no14 | Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V 3 phase and wired after fixing to the existing wooden board for motor. upto 12.5 HP ---- including cost of all materials, labor ,HOM,l | Each | 8796.9 | 8796.9 | 1.0 | False | None | None | False | None | False | 8796.9 | 0 | | 3274001 | 113549 | None | Item no5.3page no14 | Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. ---- including cost of all materials, labor ,HOM,l | Each | 1066.74 | 1066.74 | 3.0 | False | None | None | False | None | False | 3200.22 | 0 | | 3274002 | 113549 | None | Item no5.4.1page no14 | Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. upto 5 kVAR ---- including cost of all materials, labor ,HOM,l | Each | 181.72 | 181.72 | 3.0 | False | None | None | False | None | False | 545.16 | 0 | | 3274003 | 113549 | None | Item no5.5.1page no14 | Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 32A ---- including cost of all materials, labor ,HOM,l | Each | 2007.18 | 2007.18 | 3.0 | False | None | None | False | None | False | 6021.54 | 0 | | 3274004 | 113549 | None | Item no5.6.4page no14 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs
screws. 12" x 12" x 2" ---- including cost of all materials, labor ,HOM,l | Each | 213.58 | 213.58 | 3.0 | False | None | None | False | None | False | 640.74 | 0 | | 3274005 | 113549 | None | Item no5.7.3page no14 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A ---- including cost of all materials, labor ,HOM,l | Each | 473.18 | 473.18 | 3.0 | False | None | None | False | None | False | 1419.54 | 0 | | 3274006 | 113549 | None | Item no5.8.1page no15 | Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. 63 A ---- including cost of all materials, labor ,HOM,l | Each | 2728.16 | 2728.16 | 3.0 | False | None | None | False | None | False | 8184.48 | 0 | | 3274007 | 113549 | None | Item no5.12.5page no15 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 250 A ---- including cost of all materials, labor ,HOM,l | Each | 25706.3 | 25706.3 | 1.0 | False | None | None | False | None | False | 25706.3 | 0 | | 3274008 | 113549 | None | Item no5.14.1page no16 | Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 22/25 A ---- including cost of all materials, labor ,HOM,l | Each | 2607.8 | 2607.8 | 1.0 | False | None | None | False | None | False | 2607.8 | 0 | | 3274009 | 113549 | None | Item no5.15.9page no17 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole100 A 25 kA ---- including cost of all materials, labor ,HOM,l | Each | 10014.66 | 10014.66 | 2.0 | False | None | None | False | None | False | 20029.32 | 0 | | 3274010 | 113549 | None | Item no5.18.1page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A SP ---- including cost of all materials, labor ,HOM,l | Each | 489.7 | 489.7 | 3.0 | False | None | None | False | None | False | 1469.1 | 0 | | 3274011 | 113549 | None | Item no5.18.4page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A DP ---- including cost of all materials, labor ,HOM,l | Each | 872.02 | 872.02 | 8.0 | False | None | None | False | None | False | 6976.16 | 0 | | 3274012 | 113549 | None | Item no5.18.7page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A TPN ---- including cost of all materials, labor ,HOM,l | Each | 2026.06 | 2026.06 | 2.0 | False | None | None | False | None | False | 4052.12 | 0 | | 3274013 | 113549 | None | Item no5.18.9page no18 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 50-63 A TPN ---- including cost of all materials, labor ,HOM,l | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3274014 | 113549 | None | Item no5.19.8page no18 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG
MS enclosure. II - Double Door 8 Way SP & N ---- including cost of all materials, labor ,HOM,l | Each | 2187.72 | 2187.72 | 2.0 | False | None | None | False | None | False | 4375.44 | 0 | | 3274015 | 113549 | None | Item no5.22page no18 | Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. ---- including cost of all materials, labor ,HOM,l | Each | 533.36 | 533.36 | 1.0 | False | None | None | False | None | False | 533.36 | 0 | | 3274016 | 113549 | None | Item no5.25page no18 | Supplying, fixing and wiring 0 to 100 A Direct Reading AC analog type Ammeter ---- including cost of all materials, labor ,HOM,l | Each | 618.32 | 618.32 | 1.0 | False | None | None | False | None | False | 618.32 | 0 | | 3274017 | 113549 | None | Item no5.27page no19 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- including cost of all materials, labor ,HOM,l | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3274018 | 113549 | None | Item no5.28page no19 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- including cost of all materials, labor ,HOM,l | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3274019 | 113549 | None | Item no5.29page no19 | Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost of all materials, labor ,HOM,l | Each | 1681.5 | 1681.5 | 1.0 | False | None | None | False | None | False | 1681.5 | 0 | | 3274020 | 113549 | None | Item no5.33page no19 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with
communication Port and Class 0.5s accuracy ---- including cost of all materials, labor ,HOM,l | Each | 10991.7 | 10991.7 | 1.0 | False | None | None | False | None | False | 10991.7 | 0 | | 3274021 | 113549 | None | Item no5.38page no19 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- including cost of all materials, labor ,HOM,l | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3274022 | 113549 | None | Item no5.39page no19 | Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect/ disconnect banks, with automatic recognition or with standard
programs ---- including cost of all materials, labor ,HOM,l | Each | 25535.2 | 25535.2 | 1.0 | False | None | None | False | None | False | 25535.2 | 0 | | 3274023 | 113549 | None | Item no5.40.1page no20 | Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS
specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 10 mm Aluminium Strips ---- including cost of all materials, labor ,HOM,l | m | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3274024 | 113549 | None | Item no5.41.2page no20 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 x 6 mm ---- including cost of all materials, labor ,HOM,l | m | 466.1 | 466.1 | 20.0 | False | None | None | False | None | False | 9322.0 | 0 | | 3274025 | 113549 | None | Item no5.42.2page no20 | Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16 SWG ---- including cost of all materials, labor ,HOM,l | Sqm | 0.5 | 0.5 | 60000.0 | False | None | None | False | None | False | 30000.0 | 0 | | 3274026 | 113549 | None | Item no5.56page no23 | Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow:
- In Conformance with standards IEC 61643-11/2011 T2 and EN 61643-11type 2.
- For protection against indirect lightining surge and switching surge.
- Inbuilt health indicator.
- Imax (8/20s): 65/40/15/8kA
- Maximum Operating Voltage [Uc]: 340V
- Level of Protection , Up: 1.0 - 2.0kv ---- including cost of all materials, labor ,HOM,l | Each | 27612.0 | 27612.0 | 1.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3274027 | 113549 | None | Item no6.1page no30 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including cost of all materials, labor ,HOM,l | Each | 1760.56 | 1760.56 | 2.0 | False | None | None | False | None | False | 3521.12 | 0 | | 3274028 | 113549 | None | Item no6.2.1page no30 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) ---- including cost of all materials, labor ,HOM,l | Each | 3503.42 | 3503.42 | 1.0 | False | None | None | False | None | False | 3503.42 | 0 | | 3274029 | 113549 | None | Item no6.4.1page no30 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- including cost of all materials, labor ,HOM,l | Each | 3158.86 | 3158.86 | 9.0 | False | None | None | False | None | False | 28429.74 | 0 | | 3274030 | 113549 | None | Item no9.3.3page no38 | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries
and wiring complete. 5 kVA ON LINE UPS ---- including cost of all materials, labor ,HOM,l | Each | 80691.94 | 80691.94 | 1.0 | False | None | None | False | None | False | 80691.94 | 0 | | 3274031 | 113549 | None | Item no9.4.5page no38 | Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 120 AH capacity ---- including cost of all materials, labor ,HOM,l | Each | 27530.58 | 27530.58 | 6.0 | False | None | None | False | None | False | 165183.48 | 0 | | 3274032 | 113549 | None | Item no 11.2.2 page no43 | Supplying & fixing retrofit type-PL- LED Lamp ...... W LED linear source with CCT 6500 degree K, CRIGreater than 70%. efficacy Greater than80 lumen per W, lifeGreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater than 0.95, power loss should Smaller than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8-9 W ---- including cost of all materials, labor ,HOM,l | Each | 735.14 | 735.14 | 3.0 | False | None | None | False | None | False | 2205.42 | 0 | | 3274033 | 113549 | None | Item no40604page no43 | Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- including cost of all materials, labor ,HOM,l | Each | 814.2 | 814.2 | 45.0 | False | None | None | False | None | False | 36639.0 | 0 | | 3274034 | 113549 | None | Item no40697page no45 | Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRIGreater than 70%. efficacy Greater than 100 lumen per W, 120degree beam spread, lifeGreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF Greater than 0.95, power loss shouldSmaller than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' 36 W ---- including cost of all materials, labor ,HOM,l | Each | 5372.54 | 5372.54 | 2.0 | False | None | None | False | None | False | 10745.08 | 0 | | 3274035 | 113549 | None | Item no41456page no56 | On wall/ ceiling / Rafter / Girders ---- including cost of all materials, labor ,HOM,l | Each | 143.96 | 143.96 | 52.0 | False | None | None | False | None | False | 7485.92 | 0 | | 3274036 | 113549 | None | Item no13.10page no57 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- including cost of all materials, labor ,HOM,l | Each | 201.78 | 201.78 | 9.0 | False | None | None | False | None | False | 1816.02 | 0 | | 3274037 | 113549 | None | Item no13.12page no57 | Extra length of GI pipe of class B 19mm dia for down rod. ---- including cost of all materials, labor ,HOM,l | m | 232.46 | 232.46 | 9.0 | False | None | None | False | None | False | 2092.14 | 0 | | 3274038 | 113549 | None | Item no13.13page no57 | Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of
approved make with wire mesh and wooden frame. ---- including cost of all materials, labor ,HOM,l | Each | 834.26 | 834.26 | 3.0 | False | None | None | False | None | False | 2502.78 | 0 | | 3274039 | 113549 | None | Item no12.57page no54 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- including cost of all materials, labor ,HOM,l | No | 5022.08 | 5022.08 | 6.0 | False | None | None | False | None | False | 30132.48 | 0 | | 3274040 | 113549 | None | Item no12.58.2page no54 | GI/Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm GI strip ---- including cost of all materials, labor ,HOM,l | m | 96.76 | 96.76 | 60.0 | False | None | None | False | None | False | 5805.6 | 0 | | 3274041 | 113549 | None | Item no12.58.7page no55 | GI/Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm Copper strip ---- including cost of all materials, labor ,HOM,l | m | 672.6 | 672.6 | 30.0 | False | None | None | False | None | False | 20178.0 | 0 | | 3274042 | 113549 | None | Item no29.02page no | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary) ---- including cost of all materials, labor ,HOM,l | cm | 306.8 | 306.8 | 10.0 | False | None | None | False | None | False | 3068.0 | 0 | | 3274043 | 113549 | None | Item no32.05page no32 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm ---- including cost of all materials, labor ,HOM,l | Km | 167373.56 | 167373.56 | 0.12 | False | None | None | False | None | False | 20084.8272 | 0 | | 3274044 | 113549 | None | Item no21.05page no31 | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct.2.5 to 25 Sqmm ---- including cost of all materials, labor ,HOM,l | Km | 24645.48 | 24645.48 | 0.12 | False | None | None | False | None | False | 2957.4576 | 0 | | 3274045 | 113549 | None | Item no28.09page no | Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand). ---- including cost of all materials, labor ,HOM,l | Km | 17475.8 | 17475.8 | 0.1 | False | None | None | False | None | False | 1747.58 | 0 | | 3274046 | 113549 | None | Item no6.9page no | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 100mm ---- including cost of all materials, labor ,HOM,l | m | 1050.2 | 1050.2 | 11.0 | False | None | None | False | None | False | 11552.2 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi of Belagavi District-ELECTRICAL FIRST FLOOR | 878805.54 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3274047 | 113550 | None | Item no1.2.1page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 77.88 | 77.88 | 260.0 | False | None | None | False | None | False | 20248.8 | 0 | | 3274048 | 113550 | None | Item no1.2.2page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 92.04 | 92.04 | 310.0 | False | None | None | False | None | False | 28532.4 | 0 | | 3274049 | 113550 | None | Item no1.2.3page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 121.54 | 121.54 | 120.0 | False | None | None | False | None | False | 14584.8 | 0 | | 3274050 | 113550 | None | Item no1.3.1page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 80.24 | 80.24 | 180.0 | False | None | None | False | None | False | 14443.2 | 0 | | 3274051 | 113550 | None | Item no1.3.2page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 93.22 | 93.22 | 196.0 | False | None | None | False | None | False | 18271.12 | 0 | | 3274052 | 113550 | None | Item no1.3.3page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 116.82 | 116.82 | 30.0 | False | None | None | False | None | False | 3504.6 | 0 | | 3274053 | 113550 | None | Item no1.13page no4 | Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost of all materials, labor ,HOM,l | No | 138.06 | 138.06 | 21.0 | False | None | None | False | None | False | 2899.26 | 0 | | 3274054 | 113550 | None | Item no2.2.1page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box ---- including cost of all materials, labor ,HOM,l | Point | 317.42 | 317.42 | 20.0 | False | None | None | False | None | False | 6348.4 | 0 | | 3274055 | 113550 | None | Item no2.2.2page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via
switch box ---- including cost of all materials, labor ,HOM,l | Point | 447.22 | 447.22 | 30.0 | False | None | None | False | None | False | 13416.6 | 0 | | 3274056 | 113550 | None | Item no2.2.3page no5 | Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via
switch box ---- including cost of all materials, labor ,HOM,l | Point | 654.9 | 654.9 | 80.0 | False | None | None | False | None | False | 52392.0 | 0 | | 3274057 | 113550 | None | Item no2.3.2page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 1.5 mm2 ---- including cost of all materials, labor ,HOM,l | m | 30.68 | 30.68 | 400.0 | False | None | None | False | None | False | 12272.0 | 0 | | 3274058 | 113550 | None | Item no2.3.3page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 2.5 mm2 ---- including cost of all materials, labor ,HOM,l | m | 49.56 | 49.56 | 1200.0 | False | None | None | False | None | False | 59472.0 | 0 | | 3274059 | 113550 | None | Item no2.3.4page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 4 mm2 ---- including cost of all materials, labor ,HOM,l | m | 74.34 | 74.34 | 200.0 | False | None | None | False | None | False | 14868.0 | 0 | | 3274060 | 113550 | None | Item no2.3.5page no5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-
694:2010 6 mm2 ---- including cost of all materials, labor ,HOM,l | m | 108.56 | 108.56 | 120.0 | False | None | None | False | None | False | 13027.2 | 0 | | 3274061 | 113550 | None | Item no3.4.1page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-2 Way ---- including cost of all materials, labor ,HOM,l | Each | 162.84 | 162.84 | 2.0 | False | None | None | False | None | False | 325.68 | 0 | | 3274062 | 113550 | None | Item no3.4.2page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way ---- including cost of all materials, labor ,HOM,l | Each | 187.62 | 187.62 | 10.0 | False | None | None | False | None | False | 1876.2 | 0 | | 3274063 | 113550 | None | Item no3.4.3page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way ---- including cost of all materials, labor ,HOM,l | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3274064 | 113550 | None | Item no3.4.4page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way ---- including cost of all materials, labor ,HOM,l | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3274065 | 113550 | None | Item no3.4.5page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- including cost of all materials, labor ,HOM,l | Each | 307.98 | 307.98 | 8.0 | False | None | None | False | None | False | 2463.84 | 0 | | 3274066 | 113550 | None | Item no3.4.6page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way ---- including cost of all materials, labor ,HOM,l | Each | 376.42 | 376.42 | 2.0 | False | None | None | False | None | False | 752.84 | 0 | | 3274067 | 113550 | None | Item no3.4.7page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way ---- including cost of all materials, labor ,HOM,l | Each | 428.34 | 428.34 | 2.0 | False | None | None | False | None | False | 856.68 | 0 | | 3274068 | 113550 | None | Item no3.4.8page no8 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 18 Way ---- including cost of all materials, labor ,HOM,l | Each | 477.9 | 477.9 | 6.0 | False | None | None | False | None | False | 2867.4 | 0 | | 3274069 | 113550 | None | Item no3.5.1page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 1 to 2 Module ---- including cost of all materials, labor ,HOM,l | Each | 161.66 | 161.66 | 2.0 | False | None | None | False | None | False | 323.32 | 0 | | 3274070 | 113550 | None | Item no3.5.2page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 3 Module ---- including cost of all materials, labor ,HOM,l | Each | 189.98 | 189.98 | 10.0 | False | None | None | False | None | False | 1899.8 | 0 | | 3274071 | 113550 | None | Item no3.5.3page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 4 Module ---- including cost of all materials, labor ,HOM,l | Each | 206.5 | 206.5 | 2.0 | False | None | None | False | None | False | 413.0 | 0 | | 3274072 | 113550 | None | Item no3.5.4page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 6 Module ---- including cost of all materials, labor ,HOM,l | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3274073 | 113550 | None | Item no3.5.5page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 8 Module ---- including cost of all materials, labor ,HOM,l | Each | 335.12 | 335.12 | 8.0 | False | None | None | False | None | False | 2680.96 | 0 | | 3274074 | 113550 | None | Item no3.5.6page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 10-12 Module ---- including cost of all materials, labor ,HOM,l | Each | 405.92 | 405.92 | 2.0 | False | None | None | False | None | False | 811.84 | 0 | | 3274075 | 113550 | None | Item no3.5.7page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 16 Module ---- including cost of all materials, labor ,HOM,l | Each | 468.46 | 468.46 | 2.0 | False | None | None | False | None | False | 936.92 | 0 | | 3274076 | 113550 | None | Item no3.5.8page no8 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing
metal/PVC box. 18 Module ---- including cost of all materials, labor ,HOM,l | Each | 539.26 | 539.26 | 6.0 | False | None | None | False | None | False | 3235.56 | 0 | | 3274077 | 113550 | None | Item no3.6.1page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 120.36 | 120.36 | 160.0 | False | None | None | False | None | False | 19257.6 | 0 | | 3274078 | 113550 | None | Item no3.6.2page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 195.88 | 195.88 | 4.0 | False | None | None | False | None | False | 783.52 | 0 | | 3274079 | 113550 | None | Item no3.6.3page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- including cost of all materials, labor ,HOM,l | Each | 201.78 | 201.78 | 30.0 | False | None | None | False | None | False | 6053.4 | 0 | | 3274080 | 113550 | None | Item no3.6.4page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- including cost of all materials, labor ,HOM,l | Each | 421.26 | 421.26 | 21.0 | False | None | None | False | None | False | 8846.46 | 0 | | 3274081 | 113550 | None | Item no3.6.7page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- including cost of all materials, labor ,HOM,l | Each | 212.4 | 212.4 | 6.0 | False | None | None | False | None | False | 1274.4 | 0 | | 3274082 | 113550 | None | Item no3.6.8page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push ---- including cost of all materials, labor ,HOM,l | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3274083 | 113550 | None | Item no3.6.9page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- including cost of all materials, labor ,HOM,l | Each | 384.68 | 384.68 | 2.0 | False | None | None | False | None | False | 769.36 | 0 | | 3274084 | 113550 | None | Item no40243page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- including cost of all materials, labor ,HOM,l | Each | 278.48 | 278.48 | 8.0 | False | None | None | False | None | False | 2227.84 | 0 | | 3274085 | 113550 | None | Item no40608page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket ---- including cost of all materials, labor ,HOM,l | Each | 184.08 | 184.08 | 4.0 | False | None | None | False | None | False | 736.32 | 0 | | 3274086 | 113550 | None | Item no40974page no9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 ---- including cost of all materials, labor ,HOM,l | Each | 397.66 | 397.66 | 4.0 | False | None | None | False | None | False | 1590.64 | 0 | | 3274087 | 113550 | None | Item no3.8page no9 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- including cost of all materials, labor ,HOM,l | Sqm | 0.48 | 0.48 | 1000.0 | False | None | None | False | None | False | 480.0 | 0 | | 3274088 | 113550 | None | Item no5.18.1page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A SP ---- including cost of all materials, labor ,HOM,l | Each | 489.7 | 489.7 | 10.0 | False | None | None | False | None | False | 4897.0 | 0 | | 3274089 | 113550 | None | Item no5.18.4page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A DP ---- including cost of all materials, labor ,HOM,l | Each | 872.02 | 872.02 | 12.0 | False | None | None | False | None | False | 10464.24 | 0 | | 3274090 | 113550 | None | Item no5.18.7page no17 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898. 6-32 A TPN ---- including cost of all materials, labor ,HOM,l | Each | 2026.06 | 2026.06 | 2.0 | False | None | None | False | None | False | 4052.12 | 0 | | 3274091 | 113550 | None | Item no5.19.8page no18 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG
MS enclosure. II - Double Door 8 Way SP & N ---- including cost of all materials, labor ,HOM,l | Each | 2187.72 | 2187.72 | 2.0 | False | None | None | False | None | False | 4375.44 | 0 | | 3274092 | 113550 | None | Item no6.1page no30 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including cost of all materials, labor ,HOM,l | Each | 1760.56 | 1760.56 | 6.0 | False | None | None | False | None | False | 10563.36 | 0 | | 3274093 | 113550 | None | Item no6.2.1page no30 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) ---- including cost of all materials, labor ,HOM,l | Each | 3503.42 | 3503.42 | 1.0 | False | None | None | False | None | False | 3503.42 | 0 | | 3274094 | 113550 | None | Item no6.4.1page no30 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- including cost of all materials, labor ,HOM,l | Each | 3158.86 | 3158.86 | 21.0 | False | None | None | False | None | False | 66336.06 | 0 | | 3274095 | 113550 | None | Item no9.3.3page no38 | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries
and wiring complete. 5 kVA ON LINE UPS ---- including cost of all materials, labor ,HOM,l | Each | 80691.94 | 80691.94 | 1.0 | False | None | None | False | None | False | 80691.94 | 0 | | 3274096 | 113550 | None | Item no9.4.5page no38 | Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 120 AH capacity ---- including cost of all materials, labor ,HOM,l | Each | 27530.58 | 27530.58 | 6.0 | False | None | None | False | None | False | 165183.48 | 0 | | 3274097 | 113550 | None | Item no40575page no43 | Supplying & fixing retrofit type-PL- LED Lamp ...... W LED linear source with CCT 6500 degree K, CRIGreater than 70%. efficacy Greater than80 lumen per W, lifeGreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater than 0.95, power loss should Less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8-9 W ---- including cost of all materials, labor ,HOM,l | Each | 735.14 | 735.14 | 12.0 | False | None | None | False | None | False | 8821.68 | 0 | | 3274098 | 113550 | None | Item no40603page no43 | Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W ---- including cost of all materials, labor ,HOM,l | Each | 650.18 | 650.18 | 2.0 | False | None | None | False | None | False | 1300.36 | 0 | | 3274099 | 113550 | None | Item no40604page no43 | Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- including cost of all materials, labor ,HOM,l | Each | 814.2 | 814.2 | 60.0 | False | None | None | False | None | False | 48852.0 | 0 | | 3274100 | 113550 | None | Item no41456page no56 | On wall/ ceiling / Rafter / Girders ---- including cost of all materials, labor ,HOM,l | Each | 143.96 | 143.96 | 80.0 | False | None | None | False | None | False | 11516.8 | 0 | | 3274101 | 113550 | None | Item no13.10page no57 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- including cost of all materials, labor ,HOM,l | Each | 201.78 | 201.78 | 21.0 | False | None | None | False | None | False | 4237.38 | 0 | | 3274102 | 113550 | None | Item no13.12page no57 | Extra length of GI pipe of class B 19mm dia for down rod. ---- including cost of all materials, labor ,HOM,l | m | 232.46 | 232.46 | 21.0 | False | None | None | False | None | False | 4881.66 | 0 | | 3274103 | 113550 | None | Item no13.13page no57 | Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of
approved make with wire mesh and wooden frame. ---- including cost of all materials, labor ,HOM,l | Each | 834.26 | 834.26 | 7.0 | False | None | None | False | None | False | 5839.82 | 0 | | 3274104 | 113550 | None | Item no12.57page no54 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- including cost of all materials, labor ,HOM,l | No | 5022.08 | 5022.08 | 2.0 | False | None | None | False | None | False | 10044.16 | 0 | | 3274105 | 113550 | None | Item no12.58.2page no54 | GI/Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm GI strip ---- including cost of all materials, labor ,HOM,l | m | 96.0 | 96.0 | 30.0 | False | None | None | False | None | False | 2880.0 | 0 | | 3274106 | 113550 | None | Item no12.58.7page no55 | GI/Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm Copper strip ---- including cost of all materials, labor ,HOM,l | m | 672.6 | 672.6 | 20.0 | False | None | None | False | None | False | 13452.0 | 0 | | 3274107 | 113550 | None | Item no8.1page no36 | Supplying and drawing UTP-CAT 6E LAN cable. ---- including cost of all materials, labor ,HOM,l | m | 44.84 | 44.84 | 600.0 | False | None | None | False | None | False | 26904.0 | 0 | | 3274108 | 113550 | None | Item no8.2.2page no36 | Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2Pair ---- including cost of all materials, labor ,HOM,l | m | 24.78 | 24.78 | 300.0 | False | None | None | False | None | False | 7434.0 | 0 | | 3274109 | 113550 | None | Item no8.3page no36 | Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost of all materials, labor ,HOM,l | m | 51.92 | 51.92 | 100.0 | False | None | None | False | None | False | 5192.0 | 0 | | 3274110 | 113550 | None | Item no8.4.4page no36 | Supplying & Fixing of switch mounting rack with power manager & Cable manager. 12U with 450mm depth ---- including cost of all materials, labor ,HOM,l | Each | 10425.3 | 10425.3 | 1.0 | False | None | None | False | None | False | 10425.3 | 0 | | 3274111 | 113550 | None | Item no8.5page no36 | Supplying & Fixing of Power strip ---- including cost of all materials, labor ,HOM,l | Each | 1719.26 | 1719.26 | 1.0 | False | None | None | False | None | False | 1719.26 | 0 | | 3274112 | 113550 | None | Item no8.6page no36 | Supplying of shelf ---- including cost of all materials, labor ,HOM,l | Each | 975.86 | 975.86 | 1.0 | False | None | None | False | None | False | 975.86 | 0 | | 3274113 | 113550 | None | Item no8.7page no36 | Supplying & fixing of Castor wheels to the Shelf (set of 4) ---- including cost of all materials, labor ,HOM,l | Each | 1866.76 | 1866.76 | 1.0 | False | None | None | False | None | False | 1866.76 | 0 | | 3274114 | 113550 | None | Item no8.8page no36 | Supplying & Fixing of Fan ---- including cost of all materials, labor ,HOM,l | Each | 1426.62 | 1426.62 | 1.0 | False | None | None | False | None | False | 1426.62 | 0 | | 3274115 | 113550 | None | Item no8.9.5page no36 | Supplying fixing of Network Switches 24 port 10/100 Switch ---- including cost of all materials, labor ,HOM,l | Each | 5546.0 | 5546.0 | 1.0 | False | None | None | False | None | False | 5546.0 | 0 | | 3274116 | 113550 | None | Item no8.10.1page no36 | Supplying & fixing of I/O socket with back box Single I/O ---- including cost of all materials, labor ,HOM,l | Each | 578.2 | 578.2 | 12.0 | False | None | None | False | None | False | 6938.4 | 0 | | 3274117 | 113550 | None | Item no8.10.2page no37 | Supplying & fixing of I/O socket with back box Double I/O ---- including cost of all materials, labor ,HOM,l | Each | 649.0 | 649.0 | 2.0 | False | None | None | False | None | False | 1298.0 | 0 | | 3274118 | 113550 | None | Item no8.11.2page no37 | Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m ---- including cost of all materials, labor ,HOM,l | Each | 303.26 | 303.26 | 14.0 | False | None | None | False | None | False | 4245.64 | 0 | | 3274119 | 113550 | None | Item no8.12.2page no37 | Supplying & Fixing of Patch panel for LAN cabling 24 Port 10/100 patch panel ---- including cost of all materials, labor ,HOM,l | Each | 4838.0 | 4838.0 | 1.0 | False | None | None | False | None | False | 4838.0 | 0 | | 3274120 | 113550 | None | Item no8.13.2page no37 | Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- including cost of all materials, labor ,HOM,l | m | 451.94 | 451.94 | 1.0 | False | None | None | False | None | False | 451.94 | 0 |
| | 1718169478000 | 0 | None | None | Buildings | Proposed construction of Bar Association Building in the premises of court complex at chikodi of Belagavi District-ELECTRICAL SECOND FLOOR | 78693.02 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3274121 | 113551 | None | Item no1.2.1 page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 77.88 | 77.88 | 210.0 | False | None | None | False | None | False | 16354.8 | 0 | | 3274122 | 113551 | None | Item no1.2.2 page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 92.04 | 92.04 | 250.0 | False | None | None | False | None | False | 23010.0 | 0 | | 3274123 | 113551 | None | Item no1.2.3 page no2 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire
wherever necessary 32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 121.54 | 121.54 | 30.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3274124 | 113551 | None | Item no1.3.1 page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 80.24 | 80.24 | 160.0 | False | None | None | False | None | False | 12838.4 | 0 | | 3274125 | 113551 | None | Item no1.3.2 page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish
wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l | m | 93.22 | 93.22 | 180.0 | False | None | None | False | None | False | 16779.6 | 0 | | 3274126 | 113551 | None | Item no1.3.3 page no2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever 0necessary.32 mm dia 2.5 mm thick ---- including cost of all materials, labor ,HOM,l | m | 116.82 | 116.82 | 20.0 | False | None | None | False | None | False | 2336.4 | 0 | | 3274127 | 113551 | None | Item no1.13 page no4 | Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost of all materials, labor ,HOM,l | No | 138.06 | 138.06 | 27.0 | False | None | None | False | None | False | 3727.62 | 0 |
|
|
|---|