| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1717830857000 | 0 | None | None | Buildings | Electrical est | 2181956.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250472 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 1 Vol-6) | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.
---- Including cost of all materials, labour, HOM, I | m | 81.9 | 81.9 | 750.0 | False | None | None | False | None | False | 61425.0 | 0 | | 3250473 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 1 Vol-6) | Supplying heavy gauge PVC Conduit Pipe.dia.mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hook sand cement plastering upto the wall surface and run with 18SWG GI fish wire run through out the conduit wherever necessary. ---- Including cost of all materials, labour, HOM, I | m | 82.95 | 82.95 | 600.0 | False | None | None | False | None | False | 49770.0 | 0 | | 3250474 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 3 Vol-6) | Supplying and fixing PVC/metal conduit Deep junction box
---- Including cost of all materials, labour, HOM, I | 1 EACH | 58.8 | 58.8 | 30.0 | False | None | None | False | None | False | 1764.0 | 0 | | 3250475 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
---- Including cost of all materials, labour, HOM, I | 1 EACH | 185.85 | 185.85 | 28.0 | False | None | None | False | None | False | 5203.8 | 0 | | 3250476 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
---- Including cost of all materials, labour, HOM, I | 1 EACH | 274.05 | 274.05 | 17.0 | False | None | None | False | None | False | 4658.85 | 0 | | 3250477 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
---- Including cost of all materials, labour, HOM, I | 1 EACH | 334.95 | 334.95 | 12.0 | False | None | None | False | None | False | 4019.4 | 0 | | 3250478 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
---- Including cost of all materials, labour, HOM, I | 1 EACH | 425.25 | 425.25 | 4.0 | False | None | None | False | None | False | 1701.0 | 0 | | 3250479 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
---- Including cost of all materials, labour, HOM, I | 1 EACH | 169.05 | 169.05 | 28.0 | False | None | None | False | None | False | 4733.4 | 0 | | 3250480 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
---- Including cost of all materials, labour, HOM, I | 1 EACH | 298.2 | 298.2 | 17.0 | False | None | None | False | None | False | 5069.4 | 0 | | 3250481 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
---- Including cost of all materials, labour, HOM, I | 1 EACH | 361.2 | 361.2 | 12.0 | False | None | None | False | None | False | 4334.4 | 0 | | 3250482 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 8 Vol-6) | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
---- Including cost of all materials, labour, HOM, I | 1 EACH | 479.85 | 479.85 | 4.0 | False | None | None | False | None | False | 1919.4 | 0 | | 3250483 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 3 Vol-6) | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.
---- Including cost of all materials, labour, HOM, I | m | 30.45 | 30.45 | 400.0 | False | None | None | False | None | False | 12180.0 | 0 | | 3250484 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 4 Vol-6) | Supplying And Fixing Metal Fan Box with Round Hook.
---- Including cost of all materials, labour, HOM, I | No. | 122.85 | 122.85 | 30.0 | False | None | None | False | None | False | 3685.5 | 0 | | 3250485 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. Complete for each outlet(5/2.3) Group ---- Including cost of all materials, labour, HOM, I | Point | 282.45 | 282.45 | 80.0 | False | None | None | False | None | False | 22596.0 | 0 | | 3250486 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. Complete for each outlet(5/2.3) Group
---- Including cost of all materials, labour, HOM, I | Point | 397.95 | 397.95 | 80.0 | False | None | None | False | None | False | 31836.0 | 0 | | 3250487 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block. Complete for each outlet(5/2.3) Group
---- Including cost of all materials, labour, HOM, I | Point | 582.75 | 582.75 | 80.0 | False | None | None | False | None | False | 46620.0 | 0 | | 3250488 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 19.95 | 19.95 | 1800.0 | False | None | None | False | None | False | 35910.0 | 0 | | 3250489 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 27.3 | 27.3 | 5400.0 | False | None | None | False | None | False | 147420.0 | 0 | | 3250490 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 44.1 | 44.1 | 3600.0 | False | None | None | False | None | False | 158760.0 | 0 | | 3250491 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 66.15 | 66.15 | 2200.0 | False | None | None | False | None | False | 145530.0 | 0 | | 3250492 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 96.6 | 96.6 | 640.0 | False | None | None | False | None | False | 61824.0 | 0 | | 3250493 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 5 Vol-6) | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.
---- Including cost of all materials, labour, HOM, I | m | 175.35 | 175.35 | 120.0 | False | None | None | False | None | False | 21042.0 | 0 | | 3250494 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 107.1 | 107.1 | 230.0 | False | None | None | False | None | False | 24633.0 | 0 | | 3250495 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 174.3 | 174.3 | 30.0 | False | None | None | False | None | False | 5229.0 | 0 | | 3250496 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 179.55 | 179.55 | 60.0 | False | None | None | False | None | False | 10773.0 | 0 | | 3250497 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 374.85 | 374.85 | 30.0 | False | None | None | False | None | False | 11245.5 | 0 | | 3250498 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 163.8 | 163.8 | 10.0 | False | None | None | False | None | False | 1638.0 | 0 | | 3250499 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 189.0 | 189.0 | 30.0 | False | None | None | False | None | False | 5670.0 | 0 | | 3250500 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 09 Vol-6) | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
---- Including cost of all materials, labour, HOM, I | Each | 247.8 | 247.8 | 30.0 | False | None | None | False | None | False | 7434.0 | 0 | | 3250501 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 10 Vol-6) | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board
---- Including cost of all materials, labour, HOM, I | No | 81.9 | 81.9 | 200.0 | False | None | None | False | None | False | 16380.0 | 0 | | 3250502 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 10 Vol-6) | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board
---- Including cost of all materials, labour, HOM, I | No | 74.55 | 74.55 | 80.0 | False | None | None | False | None | False | 5964.0 | 0 | | 3250503 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 10 Vol-6) | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board
---- Including cost of all materials, labour, HOM, I | No | 77.7 | 77.7 | 120.0 | False | None | None | False | None | False | 9324.0 | 0 | | 3250504 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 43 Vol-6) |
Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor .0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- Including cost of all materials, labour, HOM, I | Each | 724.5 | 724.5 | 60.0 | False | None | None | False | None | False | 43470.0 | 0 | | 3250505 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 44 Vol-6) | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition
---- Including cost of all materials, labour, HOM, I | Each | 929.25 | 929.25 | 62.0 | False | None | None | False | None | False | 57613.5 | 0 | | 3250506 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 44 Vol-6) | Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322 IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- Including cost of all materials, labour, HOM, I | Each | 3294.9 | 3294.9 | 20.0 | False | None | None | False | None | False | 65898.0 | 0 | | 3250507 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 47 Vol-6) | Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired.Excluding Ballast & Fluorescent Tube.
---- Including cost of all materials, labour, HOM, I | Each | 282.45 | 282.45 | 60.0 | False | None | None | False | None | False | 16947.0 | 0 | | 3250508 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 30 Vol-6) | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated
voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification,Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty."
---- Including cost of all materials, labour, HOM, I | Each | 2810.85 | 2810.85 | 30.0 | False | None | None | False | None | False | 84325.5 | 0 | | 3250509 | 112498 | None | PWD Ele SR 2 23 24 Page No 30 Vol-6 | Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete.
---- Including cost of all materials, labour, HOM, I | Each | 3117.45 | 3117.45 | 10.0 | False | None | None | False | None | False | 31174.5 | 0 | | 3250510 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 31 Vol-6) | Supplying 1.5 Ton capacity TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded /cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote uni
---- Including cost of all materials, labour, HOM, I | Each | 50067.15 | 50067.15 | 8.0 | False | None | None | False | None | False | 400537.2 | 0 | | 3250511 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 34 Vol-6) | Supplying 25 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.
---- Including cost of all materials, labour, HOM, I | Each | 10754.1 | 10754.1 | 7.0 | False | None | None | False | None | False | 75278.7 | 0 | | 3250512 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 38 Vol-6) | Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. ---- Including cost of all materials, labour, HOM, I | Each | 41892.9 | 41892.9 | 1.0 | False | None | None | False | None | False | 41892.9 | 0 | | 3250513 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 56 Vol-6) | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.
---- Including cost of all materials, labour, HOM, I | Each | 128.1 | 128.1 | 145.0 | False | None | None | False | None | False | 18574.5 | 0 | | 3250514 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 57 Vol-6) | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary c lA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- Including cost of all materials, labour, HOM, I | Each | 330.75 | 330.75 | 30.0 | False | None | None | False | None | False | 9922.5 | 0 | | 3250515 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 57 Vol-6) | Fixing one exhaust fan after making a suitable notch in thewall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame
---- Including cost of all materials, labour, HOM, I | Each | 742.35 | 742.35 | 10.0 | False | None | None | False | None | False | 7423.5 | 0 | | 3250516 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 18 Vol-6 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.
---- Including cost of all materials, labour, HOM, I | Each | 5187.0 | 5187.0 | 5.0 | False | None | None | False | None | False | 25935.0 | 0 | | 3250517 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 17 Vol-6) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
---- Including cost of all materials, labour, HOM, I | Each | 435.75 | 435.75 | 38.0 | False | None | None | False | None | False | 16558.5 | 0 | | 3250518 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 17 Vol-6) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
---- Including cost of all materials, labour, HOM, I | Each | 775.95 | 775.95 | 13.0 | False | None | None | False | None | False | 10087.35 | 0 | | 3250519 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 17 Vol-6) | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
---- Including cost of all materials, labour, HOM, I | Each | 3196.2 | 3196.2 | 5.0 | False | None | None | False | None | False | 15981.0 | 0 | | 3250520 | 112498 | None | PWD Ele SR 2 23-24, (Page No- 17 Vol-6) | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
---- Including cost of all materials, labour, HOM, I | Each | 9027.9 | 9027.9 | 1.0 | False | None | None | False | None | False | 9027.9 | 0 | | 3250521 | 112498 | None | ELE SR 2023-24, (Page No- 20 PWD Ele SR Part-2 ,) | Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.
---- Including cost of all materials, labour, HOM, I | Sq CM | 0.53 | 0.53 | 160000.0 | False | None | None | False | None | False | 84800.0 | 0 | | 3250522 | 112498 | None | ELE SR 2023-24, (Page No- 20 PWD Ele SR 2 ,) Vol | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.
---- Including cost of all materials, labour, HOM, I | m | 414.75 | 414.75 | 14.0 | False | None | None | False | None | False | 5806.5 | 0 | | 3250523 | 112498 | None | ELE SR 2023-24,, (Page No- 20, Pwd Part-I ,) | Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
---- Including cost of all materials, labour, HOM, I | m | 2588.25 | 2588.25 | 8.0 | False | None | None | False | None | False | 20706.0 | 0 | | 3250524 | 112498 | None | ELE SR 2023-24,, (Page No- 20, Pwd Part-I ,) | Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
---- Including cost of all materials, labour, HOM, I | m | 3606.75 | 3606.75 | 6.0 | False | None | None | False | None | False | 21640.5 | 0 | | 3250525 | 112498 | None | ELE SR 2023-24, (Page No- 19, Pwd Vol_6 ,) | Supplying of multi function digital meter with three line back light LC type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.
---- Including cost of all materials, labour, HOM, I | Each | 9780.75 | 9780.75 | 1.0 | False | None | None | False | None | False | 9780.75 | 0 | | 3250526 | 112498 | None | ELE SR 2023-24, (Page No- 19, Pwd Vol_6 ,) | Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
---- Including cost of all materials, labour, HOM, I | Each | 4609.5 | 4609.5 | 1.0 | False | None | None | False | None | False | 4609.5 | 0 | | 3250527 | 112498 | None | ELE SR 2023-24, (Page No- 15, Pwd Vol_6 ,) | Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)
---- Including cost of all materials, labour, HOM, I | Each | 8960.7 | 8960.7 | 1.0 | False | None | None | False | None | False | 8960.7 | 0 | | 3250528 | 112498 | None | ELE SR 2023-24, (Page No- 19, Pwd Vol-6 ,) | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound
---- Including cost of all materials, labour, HOM, I | Each | 590.1 | 590.1 | 1.0 | False | None | None | False | None | False | 590.1 | 0 | | 3250529 | 112498 | None | PWD Ele SR 2-23-24, (Page No- 13, Vol-6 ,) | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound
---- Including cost of all materials, labour, HOM, I | Km | 146526.45 | 146526.45 | 0.15 | False | None | None | False | None | False | 21978.9675 | 0 | | 3250530 | 112498 | None | PWD SR 2-23-24, (Page No- 13, Vol-1 ,) | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work
---- Including cost of all materials, labour, HOM, I | m | 508.2 | 508.2 | 100.0 | False | None | None | False | None | False | 50820.0 | 0 | | 3250531 | 112498 | None | ELE SR 2023-24, (Page No- 52, ESCOMs SR 2023-24 , | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.
---- Including cost of all materials, labour, HOM, I | Km | 21930.3 | 21930.3 | 0.15 | False | None | None | False | None | False | 3289.545 | 0 | | 3250532 | 112498 | None | PWD Ele SR 2-23-24, (Page No- 14, Vol-6 ,) | Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts andwashers.
---- Including cost of all materials, labour, HOM, I | Each | 725.55 | 725.55 | 6.0 | False | None | None | False | None | False | 4353.3 | 0 | | 3250533 | 112498 | None | ELE SR 2023-24, (Page No- 54 PWD Ele SR 2,) Vol 6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
---- Including cost of all materials, labour, HOM, I | No | 3685.5 | 3685.5 | 5.0 | False | None | None | False | None | False | 18427.5 | 0 | | 3250534 | 112498 | None | Ele1 | Gescom Deposit
---- Including cost of all materials, labour, HOM, I | Rs | 25000.0 | 25000.0 | 1.0 | False | None | None | False | None | False | 25000.0 | 0 | | 3250535 | 112498 | None | PWD Ele SR 2 23-24 (PAGE NO 38 VOL-6) | Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. ---- Including cost of all materials, labour, HOM, I | Each | 5031.6 | 5031.6 | 8.0 | False | None | None | False | None | False | 40252.8 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | 63KVA DIST | 466521.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250536 | 112499 | None | item no 1 | 11 KVA line from tapping point to 63 kva TC ---- Including cost of all materials, labour, HOM, I | Each | 466521.0 | 466521.0 | 1.0 | False | None | None | False | None | False | 466521.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | WATER SUPPLY | 509653.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250537 | 112500 | None | SR 2023-24 Item No 14.44 Page No138 Vol 2 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ( SR 2023-24 / Item No : 14.44 Page No138 Vol 2) ---- Including cost of all materials, labour, HOM, I | Each | 11785.2 | 11785.2 | 5.0 | False | None | None | False | None | False | 58926.0 | 0 | | 3250538 | 112500 | None | SR 2023-24 Item No :14.1.1 , Page No :131 Vol 2) | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (SR 2023-24 Item No :14.1.1 , Page No :131 Vol 2)
---- Including cost of all materials, labour, HOM, I | Each | 5128.2 | 5128.2 | 3.0 | False | None | None | False | None | False | 15384.6 | 0 | | 3250539 | 112500 | None | SR 2023-24 Item No :14.25.1 ,Page No : 135 Vol 2) | Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings Flat back wash basin of size 630x450 mm. (SR 2023-24 Item No :14.25.1 ,Page No : 135 Vol 2)
---- Including cost of all materials, labour, HOM, I | Each | 1035.3 | 1035.3 | 12.0 | False | None | None | False | None | False | 12423.6 | 0 | | 3250540 | 112500 | None | SR 2023-24Item No : 13.27.2 , Page No : 121 Vol 2 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length (SR 2023-24Item No : 13.27.2 , Page No : 121 Vol 2)
---- Including cost of all materials, labour, HOM, I | Each | 121.8 | 121.8 | 8.0 | False | None | None | False | None | False | 974.4 | 0 | | 3250541 | 112500 | None | SR 2023-24 Item No :14.28.1.1 ,Page No : 136 Vol 2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia (SR 2023-24 Item No :14.28.1.1 ,Page No : 136 Vol 2)
---- Including cost of all materials, labour, HOM, I | Each | 79.8 | 79.8 | 12.0 | False | None | None | False | None | False | 957.6 | 0 | | 3250542 | 112500 | None | SR 2023-24 Item No :13.14 , Page No :119 Vol 2 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. (SR 2023-24 Item No :13.14 , Page No :119 Vol 2)
---- Including cost of all materials, labour, HOM, I | Nos | 888.3 | 888.3 | 20.0 | False | None | None | False | None | False | 17766.0 | 0 | | 3250543 | 112500 | None | SR 2023-24 Item No : 13.16 , Page No : 119 Vol 2) | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (SR 2023-24 Item No : 13.16 , Page No : 119 Vol 2)
---- Including cost of all materials, labour, HOM, I | Nos | 651.0 | 651.0 | 12.0 | False | None | None | False | None | False | 7812.0 | 0 | | 3250544 | 112500 | None | SR 2023-24 Item No :13.22.2 ,Page No : 120 Vol 2) | Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid (SR 2023-24 Item No :13.22.2 ,Page No : 120 Vol 2)
---- Including cost of all materials, labour, HOM, I | Nos | 212.0 | 212.0 | 15.0 | False | None | None | False | None | False | 3180.0 | 0 | | 3250545 | 112500 | None | SR 2023-24 Item No : 13.6.1.1 Page No : 117 Vol 2 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal SR 2023-24 Item No : 13.6.1.1 Page No : 117 Vol 2) ---- Including cost of all materials, labour, HOM, I | Nos | 651.0 | 651.0 | 8.0 | False | None | None | False | None | False | 5208.0 | 0 | | 3250546 | 112500 | None | SR 2023-24 Item No : 13.5.3 , Page No :117 Vol 2 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (SR 2023-24 Item No : 13.5.3 , Page No :117 Vol 2)
---- Including cost of all materials, labour, HOM, I | Nos | 348.6 | 348.6 | 6.0 | False | None | None | False | None | False | 2091.6 | 0 | | 3250547 | 112500 | None | SR 2023-24 Item No : 14.38 , Page No :137 Vol 2 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g. (SR 2023-24 Item No : 14.38 , Page No :137 Vol 2) ---- Including cost of all materials, labour, HOM, I | Each | 152.25 | 152.25 | 10.0 | False | None | None | False | None | False | 1522.5 | 0 | | 3250548 | 112500 | None | SR 2023-24 Item No : 13.33.6 ,Page No :123 Vol 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes (SR 2023-24 Item No : 13.33.6 ,Page No :123 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 757.05 | 757.05 | 200.0 | False | None | None | False | None | False | 151410.0 | 0 | | 3250549 | 112500 | None | SR 2023-24 Item No :13.32.3 , Page No : 122 Vol 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (SR 2023-24 Item No :13.32.3 , Page No : 122 Vol 2) ---- Including cost of all materials, labour, HOM, I | m | 500.85 | 500.85 | 350.0 | False | None | None | False | None | False | 175297.5 | 0 | | 3250550 | 112500 | None | SR 2023-24 Item No : 13.34 , Page No : 123 Vol 2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (SR 2023-24 Item No : 13.34 , Page No : 123 Vol 2)
---- Including cost of all materials, labour, HOM, I | Ltr | 9.45 | 9.45 | 6000.0 | False | None | None | False | None | False | 56700.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | SANITARY | 157403.55 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250551 | 112501 | None | SR 2023-24 Item No : 1.4,1 , Page No 5 : Vol 1 | Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per drawing and technical specifications,
including setting out, shoring, strutting, barricading, caution lights, removal
of stumps and other deleterious matter, excavated surface leveled and sides
neatly dressed disposing off the excavated stuff or sorting & stacking the
selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m.SR 2023-24 Item No : 1.4,1 , Page No 5 : Vol 1 ---- Including cost of all materials, labour, HOM, I | Cum | 254.1 | 254.1 | 29.2 | False | None | None | False | None | False | 7419.72 | 0 | | 3250552 | 112501 | None | SR 2023-24 Item No : 16.9 , Page No : 191 Vol 5) | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ( SR 2023-24 / Item No : 16.9 , Page No : 191 Vol 5)
---- Including cost of all materials, labour, HOM, I | Each | 5726.7 | 5726.7 | 6.0 | False | None | None | False | None | False | 34360.2 | 0 | | 3250553 | 112501 | None | PWD SR 2023-24 Ballari Circle Item No.7.3 Page No. | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. (PWD SR 2023-24 Ballari Circle Item No.7.3 Page No.85 Vol 5)
---- Including cost of all materials, labour, HOM, I | Each | 2247.0 | 2247.0 | 6.0 | False | None | None | False | None | False | 13482.0 | 0 | | 3250554 | 112501 | None | SR 2023-24 Item No 9.1.4 Page No 95 Vol 5. | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0,110mm dia ( SR 2023-24 / Item No : 9.1.4 , Page No : 95 Vol 5) ---- Including cost of all materials, labour, HOM, I | m | 492.45 | 492.45 | 195.0 | False | None | None | False | None | False | 96027.75 | 0 | | 3250555 | 112501 | None | SR 2023-24 , Item No : 1.9 , Page No : 34 , Vol 1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( SR 2023-24 , Item No : 1.9 , Page No : 34 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 21.89 | False | None | None | False | None | False | 6113.877 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | SUMP | 647049.4 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250556 | 112502 | None | SR 2023-24 Item No : 2.1.3 , Page No :15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (SR 2023-24 Item No : 2.1.3 , Page No :15 Vol 1)
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 6.11 | False | None | None | False | None | False | 38422.4295 | 0 | | 3250557 | 112502 | None | SR 2023-24 Item No 1.14.1 Page No 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 / Item No : 1.14.1 , Page No : 8 Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 122.13 | False | None | None | False | None | False | 13080.123 | 0 | | 3250558 | 112502 | None | SR 2023-24 , Item No : 2.4.3 ,Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24 , Item No : 2.4.3 ,Page No : 16 , Vol 1)
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 4.45 | False | None | None | False | None | False | 29604.96 | 0 | | 3250559 | 112502 | None | SR 2023-24, Addendum I , Page No :111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding (SR 2023-24, Addendum I , Page No :111 , Vol 1. ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3326.4 | 3326.4 | 4.5 | False | None | None | False | None | False | 14968.8 | 0 | | 3250560 | 112502 | None | SR 2023-24 ,Item No : 2.4.3 ,Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24 ,Item No : 2.4.3 ,Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 10.55 | False | None | None | False | None | False | 70187.04 | 0 | | 3250561 | 112502 | None | SR 2023-24 , Addendum I ,Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding (SR 2023-24 , Addendum I ,Page No : 111 , Vol 1. ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3326.4 | 3326.4 | 10.55 | False | None | None | False | None | False | 35093.52 | 0 | | 3250562 | 112502 | None | SR 2023-24 , Item No : 2.4.3 ,Page No :16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24 , Item No : 2.4.3 ,Page No :16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 14.76 | False | None | None | False | None | False | 98195.328 | 0 | | 3250563 | 112502 | None | SR 2023-24 , Addendum I ,Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding (SR 2023-24 , Addendum I ,Page No : 111 , Vol 1. ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 665.28 | 665.28 | 14.76 | False | None | None | False | None | False | 9819.5328 | 0 | | 3250564 | 112502 | None | SR 2023-24 ,Item No : 2.11 a, Page No : 18 ,Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings (SR 2023-24 ,Item No : 2.11 a, Page No : 18 ,Vol 1 )
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 3.22 | False | None | None | False | None | False | 302454.117 | 0 | | 3250565 | 112502 | None | COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No.34 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No.34)
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 28.62 | False | None | None | False | None | False | 7993.566 | 0 | | 3250566 | 112502 | None | PWD SR 2023-24 Item No.7.3 Page No. | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. (PWD SR 2023-24 Item No.7.3 Page No.85 Vol 5)
---- Including cost of all materials, labour, HOM, I | Each | 2247.0 | 2247.0 | 1.0 | False | None | None | False | None | False | 2247.0 | 0 | | 3250567 | 112502 | None | PWD SR 2023-24 Ballari Circle Item No.7.1 Page No. | Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm (PWD SR 2023-24 Ballari Circle Item No.7.1 Page No.85 Vol 5)
---- Including cost of all materials, labour, HOM, I | m | 4595.85 | 4595.85 | 4.0 | False | None | None | False | None | False | 18383.4 | 0 | | 3250568 | 112502 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 6652.8 | 6652.8 | 0.62 | False | None | None | False | None | False | 4124.736 | 0 | | 3250569 | 112502 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 3991.68 | 3991.68 | 0.62 | False | None | None | False | None | False | 2474.8416 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | SEPTIC | 267199.79 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250570 | 112503 | None | SR 2023-24 Item No 1.14.1 Page No 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 123.93 | False | None | None | False | None | False | 13272.903 | 0 | | 3250571 | 112503 | None | SR 2023-24 Item No:2.1.3 ,Page No:15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 5.19 | False | None | None | False | None | False | 32637.0555 | 0 | | 3250572 | 112503 | None | SR 2023-24 ,Item No:2.4.3 Page No:16 Vol1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 3.39 | False | None | None | False | None | False | 22552.992 | 0 | | 3250573 | 112503 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol1 | Percentage Additionalities for Formwork, Centering & Scaffolding (SR 2023-24 , Addendum I , Page No : 111 , Vol1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3326.4 | 3326.4 | 3.39 | False | None | None | False | None | False | 11276.496 | 0 | | 3250574 | 112503 | None | SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vo | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 0.29 | False | None | None | False | None | False | 27239.6565 | 0 | | 3250575 | 112503 | None | PWD SR 2023-24, Item no.6.32, Page No.17 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR 2023-24, Item no.6.32, Page No.17 Vol 2) ---- Including cost of all materials, labour, HOM, I | Cum | 1375.5 | 1375.5 | 59.81 | False | None | None | False | None | False | 82268.655 | 0 | | 3250576 | 112503 | None | SR 2023-24,Vol-2,SL.No. 8.3.2, P.No.41 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge
---- Including cost of all materials, labour, HOM, I | Cum | 349.65 | 349.65 | 116.0 | False | None | None | False | None | False | 40559.4 | 0 | | 3250577 | 112503 | None | SR 2023-24 Item No.7.3 Page No | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.
---- Including cost of all materials, labour, HOM, I | Nos | 2247.0 | 2247.0 | 1.0 | False | None | None | False | None | False | 2247.0 | 0 | | 3250578 | 112503 | None | SR 2023-24 Ballari Circle Item No.10.14.8 Pag | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges,handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.110mm(weight of pipe -1.894 kg)
---- Including cost of all materials, labour, HOM, I | m | 466.2 | 466.2 | 16.0 | False | None | None | False | None | False | 7459.2 | 0 | | 3250579 | 112503 | None | PWD SR 2023-24, Item no.6.33, Page No.17 Vol 2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (PWD SR 2023-24, Item no.6.33, Page No.17 Vol 2) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 1292.55 | 1292.55 | 21.42 | False | None | None | False | None | False | 27686.421 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | ELEVATION | 1014938.4 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250580 | 112504 | None | SR 2023-24 Item No : 8.29 , Page No : 45 Vol 2 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( SR 2023-24 Item No : 8.29 , Page No : 45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 297.15 | 297.15 | 288.0 | False | None | None | False | None | False | 85579.2 | 0 | | 3250581 | 112504 | None | SR 2023-24 Item No : 10.15.1, Page No : 71 Vol 2 | Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/ beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Straight Portion ( SR 2023-24 Item No : 10.15.1, Page No : 71 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 4188.45 | 4188.45 | 40.0 | False | None | None | False | None | False | 167538.0 | 0 | | 3250582 | 112504 | None | SR 2023-24 Item No.10.18, Page No.71 Vol 2 | Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. (PWD SR 2023-24 Item No.10.18, Page No.71 Vol 2) ---- Including cost of all materials, labour, HOM, I | Sqm | 3526.95 | 3526.95 | 216.0 | False | None | None | False | None | False | 761821.2 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | BOREWELL | 297370.5 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250583 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.4 P.No.140 | Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geologicalformation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and rojection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test.(Commom 2023-2024 PWD SR (Vol-5) Sl No.12.4 P.No.140)
---- Including cost of all materials, labour, HOM, I | Each | 5552.4 | 5552.4 | 1.0 | False | None | None | False | None | False | 5552.4 | 0 | | 3250584 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 TO 12.1.4 P. | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimumworking of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 TO 12.1.4 P.No.139)
---- Including cost of all materials, labour, HOM, I | Rmtr | 388.5 | 388.5 | 50.0 | False | None | None | False | None | False | 19425.0 | 0 | | 3250585 | 112505 | None | 2023-2024PWD SR(Vol-5) Sl No12.1.1 12.1.4 P.139 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimumworking of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 TO 12.1.4 P.No.139)
---- Including cost of all materials, labour, HOM, I | Rmtr | 487.2 | 487.2 | 50.0 | False | None | None | False | None | False | 24360.0 | 0 | | 3250586 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 12.1.4 P.139 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimumworking of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 TO 12.1.4 P.No.139)
---- Including cost of all materials, labour, HOM, I | Rmtr | 517.65 | 517.65 | 50.0 | False | None | None | False | None | False | 25882.5 | 0 | | 3250587 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 12.1.4 P.139 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimumworking of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.1.1 TO 12.1.4 P.No.139)
---- Including cost of all materials, labour, HOM, I | Rmtr | 600.6 | 600.6 | 50.0 | False | None | None | False | None | False | 30030.0 | 0 | | 3250588 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.10.1.10 P.No.113 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 200mm dia., 6 kg/sqcm & class 3 (Commom 2023-2024 PWD SR (Vol-5) Sl No.10.1.10 P.No.113)
---- Including cost of all materials, labour, HOM, I | Rmtr | 1170.75 | 1170.75 | 50.0 | False | None | None | False | None | False | 58537.5 | 0 | | 3250589 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.33 P.No.143 | Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.33 P.No.143)
---- Including cost of all materials, labour, HOM, I | Each | 157.5 | 157.5 | 1.0 | False | None | None | False | None | False | 157.5 | 0 | | 3250590 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.12.34 P.No.143 | Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge (Commom 2023-2024 PWD SR (Vol-5) Sl No.12.34 P.No.143)
---- Including cost of all materials, labour, HOM, I | Each | 172.2 | 172.2 | 1.0 | False | None | None | False | None | False | 172.2 | 0 | | 3250591 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.13.11.3 P.No.151 | Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete 3.00 HP - 135 LPM @ 56 m = 8 STG Outlet Dia - 2.00 6 to 15 HP pumps (Commom 2023-2024 PWD SR (Vol-5) Sl No.13.11.3 P.No.151)
---- Including cost of all materials, labour, HOM, I | Each | 27205.5 | 27205.5 | 1.0 | False | None | None | False | None | False | 27205.5 | 0 | | 3250592 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.13.23.3 P.No.155 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter 6 to 15 HP pumps (Commom 2023-2024 PWD SR (Vol-5) Sl No.13.23.3 P.No.155)
---- Including cost of all materials, labour, HOM, I | Each | 16695.0 | 16695.0 | 1.0 | False | None | None | False | None | False | 16695.0 | 0 | | 3250593 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.11.3.5 P.No.128 | Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: Heavy Duty GI pipe of 40mm dia (Commom 2023-2024 PWD SR (Vol-5) Sl No.11.3.5 P.No.128)
---- Including cost of all materials, labour, HOM, I | Rmtr | 522.9 | 522.9 | 80.0 | False | None | None | False | None | False | 41832.0 | 0 | | 3250594 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.11.7.5 P.No.129) | Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:For 40 mm dia GI elbow (Commom 2023-2024 PWD SR (Vol-5) Sl No.11.7.5 P.No.129)
---- Including cost of all materials, labour, HOM, I | Each | 216.3 | 216.3 | 3.0 | False | None | None | False | None | False | 648.9 | 0 | | 3250595 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.13.32 P.No.163 | Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.(Commom 2023-2024 PWD SR (Vol-5) Sl No.13.32 P.No.163)
---- Including cost of all materials, labour, HOM, I | Job | 6825.0 | 6825.0 | 1.0 | False | None | None | False | None | False | 6825.0 | 0 | | 3250596 | 112505 | None | 2023-2024 PWD SR (Vol-6) Sl No.2.6.4 P.No.7 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to 13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. (Commom 2023-2024 PWD SR (Vol-6) Sl No.2.6.4 P.No.7)
---- Including cost of all materials, labour, HOM, I | Rmtr | 433.65 | 433.65 | 80.0 | False | None | None | False | None | False | 34692.0 | 0 | | 3250597 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.13.33 P.No.156 | Labour charges for erection of indoor type panel board and meter boardunits with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. (Commom 2023-2024 PWD SR (Vol-5) Sl No.13.33 P.No.156)
---- Including cost of all materials, labour, HOM, I | Job | 1417.5 | 1417.5 | 1.0 | False | None | None | False | None | False | 1417.5 | 0 | | 3250598 | 112505 | None | 2023-2024 PWD SR (Vol-5) Sl No.13.39 P.No.157 | Earthing: Supplying and fixing and wiring earth electrode for groundingcircuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. (Commom 2023-2024 PWD SR (Vol-5) Sl No.13.39 P.No.157)
---- Including cost of all materials, labour, HOM, I | Job | 3937.5 | 3937.5 | 1.0 | False | None | None | False | None | False | 3937.5 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | R.O UNIT | 605850.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250599 | 112506 | None | SR 2021-22 VOLUME 5 CODE NO - 21.1.2 PAGE NO 247 | Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components (SR 2021-22 VOLUME 5 CODE NO - 21.1.2 PAGE NO 247)
---- Including cost of all materials, labour, HOM, I | Each | 343350.0 | 343350.0 | 1.0 | False | None | None | False | None | False | 343350.0 | 0 | | 3250600 | 112506 | None | SR 2021-22 VOLUME 5 CODE NO -21.1.6 & 21.1.7 PAGE | Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components (SR 2021-22 VOLUME 5 CODE NO -21.1.6 & 21.1.7 PAGE NO 247) ---- Including cost of all materials, labour, HOM, I | Each | 262500.0 | 262500.0 | 1.0 | False | None | None | False | None | False | 262500.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | ENTRANCE ARCH | 2103249.19 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250601 | 112507 | None | SR 2023-24 Vol-2, P.NO -163, SL.No -19.9.1 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin-charge. In lime mortar (COMMON SR 2023-24 Vol-2, P.NO -163, SL.No -19.9.1)
---- Including cost of all materials, labour, HOM, I | Cum | 831.6 | 831.6 | 7.78 | False | None | None | False | None | False | 6469.848 | 0 | | 3250602 | 112507 | None | COMMON SR 2023-24 Vol-2, P.NO -193, SL.No -19.57 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable material separately including cutting reinforcement bars.(COMMON SR 2023-24 Vol-2, P.NO -193, SL.No -19.57) ---- Including cost of all materials, labour, HOM, I | Cum | 2466.45 | 2466.45 | 1.18 | False | None | None | False | None | False | 2910.411 | 0 | | 3250603 | 112507 | None | SR 2023-24 Vol-2, P.NO -187, SL.No -19.7.3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar (COMMON SR 2023-24 Vol-2, P.NO -187, SL.No -19.7.3) ---- Including cost of all materials, labour, HOM, I | Cum | 1080.45 | 1080.45 | 14.4 | False | None | None | False | None | False | 15558.48 | 0 | | 3250604 | 112507 | None | SR 2023-24 Item No : 1.14.1 , Page No : 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m SR 2023-24 Item No 1.14.1 , Page No 8 Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 89.57 | False | None | None | False | None | False | 9592.947 | 0 | | 3250605 | 112507 | None | SR 2023-24 Item No : 2.1.3 , Page No : 15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) ---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 28.15 | False | None | None | False | None | False | 177019.8675 | 0 | | 3250606 | 112507 | None | SR 2023-24 Item No : 5.1.1 , Page No :9 Vol 2 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) ( SR 2023-24 Item No : 5.1.1 , Page No :9 Vol 2) ---- Including cost of all materials, labour, HOM, I | Cum | 5891.55 | 5891.55 | 5.06 | False | None | None | False | None | False | 29811.243 | 0 | | 3250607 | 112507 | None | SR 2023-24, Vol-2 SL.No. 5.4, P. No. 9 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) (SR 2023-24, Vol-2 SL.No. 5.4, P. No. 9). ---- Including cost of all materials, labour, HOM, I | Cum | 6708.45 | 6708.45 | 9.99 | False | None | None | False | None | False | 67017.4155 | 0 | | 3250608 | 112507 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 11.49 | False | None | None | False | None | False | 76440.672 | 0 | | 3250609 | 112507 | None | SR 2023-24 ,Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | Cum | 532.22 | 532.22 | 11.49 | False | None | None | False | None | False | 6115.2078 | 0 | | 3250610 | 112507 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 2.74 | False | None | None | False | None | False | 18228.672 | 0 | | 3250611 | 112507 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | Cum | 4656.96 | 4656.96 | 2.74 | False | None | None | False | None | False | 12760.0704 | 0 | | 3250612 | 112507 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 2.76 | False | None | None | False | None | False | 18361.728 | 0 | | 3250613 | 112507 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | Cum | 3326.4 | 3326.4 | 2.76 | False | None | None | False | None | False | 9180.864 | 0 | | 3250614 | 112507 | None | SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 4.21 | False | None | None | False | None | False | 30249.4815 | 0 | | 3250615 | 112507 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | Cum | 5029.61 | 5029.61 | 4.21 | False | None | None | False | None | False | 21174.6581 | 0 | | 3250616 | 112507 | None | SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 0.42 | False | None | None | False | None | False | 3017.763 | 0 | | 3250617 | 112507 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4311.09 | 4311.09 | 0.42 | False | None | None | False | None | False | 1810.6578 | 0 | | 3250618 | 112507 | None | SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 2.39 | False | None | None | False | None | False | 17172.5085 | 0 | | 3250619 | 112507 | None | SR 2023-24 AddendumI Page No112 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 112 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4311.09 | 4311.09 | 2.39 | False | None | None | False | None | False | 10303.5051 | 0 | | 3250620 | 112507 | None | SR 2023-24 Item No : 2.11 a, Page No : 18 , Vol1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings ( SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 2.41 | False | None | None | False | None | False | 226370.9385 | 0 | | 3250621 | 112507 | None | SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34)
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 60.1 | False | None | None | False | None | False | 16785.93 | 0 | | 3250622 | 112507 | None | SR 2023-24, Vol-2, SL.No. 6.2, Pg. No. 13 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (COMMON SR 2023-24, Vol-2, SL.No. 6.2, Pg. No. 13)
---- Including cost of all materials, labour, HOM, I | Cum | 8376.9 | 8376.9 | 77.89 | False | None | None | False | None | False | 652476.741 | 0 | | 3250623 | 112507 | None | SR 2023-24 Ballari Circle Item No.8.9, Page No.42 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Ballari Circle Item No.8.9, Page No.42 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 404.25 | 404.25 | 838.65 | False | None | None | False | None | False | 339024.2625 | 0 | | 3250624 | 112507 | None | SR 2023-24 Ballari Item No.8.28, Page No.45 Vol 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Ballari Circle Item No.8.27, Page No.45 Vol 2) ---- Including cost of all materials, labour, HOM, I | Sqm | 55.65 | 55.65 | 838.65 | False | None | None | False | None | False | 46670.8725 | 0 | | 3250625 | 112507 | None | SR 2023-24 Item No.8.28, Page No.45 Vol 2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.28, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 93.45 | 93.45 | 838.69 | False | None | None | False | None | False | 78375.5805 | 0 | | 3250626 | 112507 | None | SR 2023-24 Item No.11.34B, Page No.85 Vol 2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR 2023-24 Item No.11.34B, Page No.85 Vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 192.15 | 192.15 | 529.2 | False | None | None | False | None | False | 101685.78 | 0 | | 3250627 | 112507 | None | SR 2023-24 Item No.8.41, Page No.48 vol 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 175.35 | 175.35 | 25.2 | False | None | None | False | None | False | 4418.82 | 0 | | 3250628 | 112507 | None | SR 2023-24 Item No : 8.29 , Page No : 45 Vol 2 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( SR 2023-24 Item No : 8.29 , Page No : 45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 297.15 | 297.15 | 56.75 | False | None | None | False | None | False | 16863.2625 | 0 | | 3250629 | 112507 | None | PWD SR 2023-24 Item No.11.57.1, Page No.95 Vol 2 | Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals
interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (PWD SR 2023-24 Item No.11.57.1, Page No.95 Vol 2) ---- Including cost of all materials, labour, HOM, I | Sqm | 18.9 | 18.9 | 1140.0 | False | None | None | False | None | False | 21546.0 | 0 | | 3250630 | 112507 | None | SR 2023-24 Item No.10.15.2 Page No.71 Vol 2 | Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Curved Portion (PWD SR 2023-24 Item No.10.15.2 Page No.71 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 4981.2 | 4981.2 | 7.5 | False | None | None | False | None | False | 37359.0 | 0 | | 3250631 | 112507 | None | SR 2023-24 Item No.11.57.2, Page No.95 Vol 2 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (PWD SR 2023-24 Item No.11.57.2, Page No.95 Vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 118.65 | 118.65 | 240.0 | False | None | None | False | None | False | 28476.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | PAVERS AND CC ROAD | 7640829.6 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250632 | 112508 | None | SR 2023-24 Item No : 1.14.1 , Page No : 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 / Item No : 1.14.1 , Page No : 8 Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 1719.06 | False | None | None | False | None | False | 184111.326 | 0 | | 3250633 | 112508 | None | SR 2023-24 Item No : 3.7 MORTH 305.3.4 Page No3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ( SR 2023-24 Item No : 3.7 / MORTH 305.3.4 , Page No : 17, Vol 3 )
---- Including cost of all materials, labour, HOM, I | Cum | 110.25 | 110.25 | 560.6 | False | None | None | False | None | False | 61806.15 | 0 | | 3250634 | 112508 | None | SR 2023-24 , Vol-3 Sl.No.4.1.A.(v) ,P.No - 19 | A Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (v) For Grading -V Material (SR 2023-24 , Vol-3 Sl.No.4.1.A.(v) ,P.No - 19)
---- Including cost of all materials, labour, HOM, I | Cum | 2611.35 | 2611.35 | 560.6 | False | None | None | False | None | False | 1463922.81 | 0 | | 3250635 | 112508 | None | SR 2023-24 Vol-3 Sl.No.4.27 ,P.No - 26 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in (SR 2023-24 Vol-3 Sl.No.4.27 ,P.No - 26.)
---- Including cost of all materials, labour, HOM, I | Cum | 2686.95 | 2686.95 | 560.6 | False | None | None | False | None | False | 1506304.17 | 0 | | 3250636 | 112508 | None | SR 2023-24 Vol-2, Sl.No. 6.8.2 ,P.No - 51 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) (SR 2023-24 Vol-2, Sl.No. 6.8.2 ,P.No - 51)
---- Including cost of all materials, labour, HOM, I | Sqm | 1219.05 | 1219.05 | 2917.35 | False | None | None | False | None | False | 3556395.5175 | 0 | | 3250637 | 112508 | None | SR 2023-24 Item No : 1.4.1 , Page No : 5 Vol 1 | Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges andsuch simillar works in all kinds of soils , as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off theexcavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m (SR 2023-24 Item No : 1.4.1 , Page No : 5 Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 254.1 | 254.1 | 202.5 | False | None | None | False | None | False | 51455.25 | 0 | | 3250638 | 112508 | None | SR 2023-24 Item No : 3.7 , Page No : 17, Vol 3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. (SR 2023-24 Item No : 3.7 , Page No : 17, Vol 3 )
---- Including cost of all materials, labour, HOM, I | Cum | 110.25 | 110.25 | 67.5 | False | None | None | False | None | False | 7441.875 | 0 | | 3250639 | 112508 | None | SR 2023-24 , Vol-3 Sl.No.4.1.A.(v) ,P.No - 19 | A Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (v) For Grading -V Material (SR 2023-24 , Vol-3 Sl.No.4.1.A.(v) ,P.No - 19)
---- Including cost of all materials, labour, HOM, I | Cum | 2611.35 | 2611.35 | 67.5 | False | None | None | False | None | False | 176266.125 | 0 | | 3250640 | 112508 | None | SR 2023-24 , Vol-3 Sl.No.4.27 ,P.No - 26 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in (SR 2023-24 , Vol-3 Sl.No.4.27 ,P.No - 26)
---- Including cost of all materials, labour, HOM, I | Cum | 2686.95 | 2686.95 | 67.5 | False | None | None | False | None | False | 181369.125 | 0 | | 3250641 | 112508 | None | SR 2023-24 , Vol-3, Sl.No. 16.27 P.No - 148 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.(COMMON SR SR 2023-24 , Vol-3, Sl.No. 16.27 P.No - 148)
---- Including cost of all materials, labour, HOM, I | Cum | 6692.7 | 6692.7 | 67.5 | False | None | None | False | None | False | 451757.25 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | HIGH MAST | 446875.25 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250642 | 112509 | None | PWD Common SR 2023-24, (Page No- 6 Vol-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth
---- Including cost of all materials, labour, HOM, I | Cum | 313.95 | 313.95 | 8.16 | False | None | None | False | None | False | 2561.832 | 0 | | 3250643 | 112509 | None | PWD Common SR 2023-24, (Page No- 15 Vol-1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 0.98 | False | None | None | False | None | False | 6162.681 | 0 | | 3250644 | 112509 | None | PWD Common SR 2023-24, (Page No- 16 Vol-1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 1.94 | False | None | None | False | None | False | 12906.432 | 0 | | 3250645 | 112509 | None | 2.43 | Addendum I Additionalities for Formwork, Centering & Scaffolding -SI.No.1-Foundation upto Plinth-a.Isolated 8percent (Pg No:111) ---- Including cost of all materials, labour, HOM, I | Cum | 532.22 | 532.22 | 1.94 | False | None | None | False | None | False | 1032.5068 | 0 | | 3250646 | 112509 | None | PWD Common SR 2023-24, (Page No- 16 Vol-1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 0.59 | False | None | None | False | None | False | 3925.152 | 0 | | 3250647 | 112509 | None | 2.43 | Addendum I Additionalities for Formwork, Centering & Scaffolding -RCC Columns / Shaft (Slip Centering) 70percent (Pg No:111 ---- Including cost of all materials, labour, HOM, I | Cum | 4656.96 | 4656.96 | 0.59 | False | None | None | False | None | False | 2747.6064 | 0 | | 3250648 | 112509 | None | PWD Common SR 2023-24, Page No- 18 Vol-1 i.no 2.11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 0.22 | False | None | None | False | None | False | 20664.567 | 0 | | 3250649 | 112509 | None | Vol-1 Sl no1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 1.89 | False | None | None | False | None | False | 527.877 | 0 | | 3250650 | 112509 | None | ELE SR 2023-24 Page No-11 PWD Ele SR 2 Vol-6 4.5.6 | Fabrication, Supplying, Erection, Testing and Commissioning of. ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint The mast shall have 2 Way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual/power tool The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. (excluding foundation) as per technical data. 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia
---- Including cost of all materials, labour, HOM, I | Each | 137550.0 | 137550.0 | 1.0 | False | None | None | False | None | False | 137550.0 | 0 | | 3250651 | 112509 | None | ELE SR 2023-24 Page No- 46 PWD Ele SR 2 Vol611.9.6 | Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with . W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI any Government certified agency & Design Development facility certified by ISO 9001:2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ LED Floodlight 200W ---- Including cost of all materials, labour, HOM, I | Each | 19510.05 | 19510.05 | 6.0 | False | None | None | False | None | False | 117060.3 | 0 | | 3250652 | 112509 | None | ELE SR 2023-24 Page No17 PWD Ele SR 2 Vol6 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
---- Including cost of all materials, labour, HOM, I | Each | 3242.4 | 3242.4 | 1.0 | False | None | None | False | None | False | 3242.4 | 0 | | 3250653 | 112509 | None | ELE SR 2023-24 Page No-18 PWD Ele SR 2 Vol 65.20.1 | Supplying,fixing and wiring Residual current circuit breaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board
---- Including cost of all materials, labour, HOM, I | Each | 5822.25 | 5822.25 | 1.0 | False | None | None | False | None | False | 5822.25 | 0 | | 3250654 | 112509 | None | ELE SR 2023-24Page No20 PWD Ele SR 2 Vol 6sl5.40.1 | Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
---- Including cost of all materials, labour, HOM, I | m | 2588.25 | 2588.25 | 2.0 | False | None | None | False | None | False | 5176.5 | 0 | | 3250655 | 112509 | None | ELE SR 2023-24Page No-54 PWD Ele SR 2Vol 6sl12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
---- Including cost of all materials, labour, HOM, I | No | 3685.5 | 3685.5 | 2.0 | False | None | None | False | None | False | 7371.0 | 0 | | 3250656 | 112509 | None | ELE 2023-24Pg No-20 PWD Ele SR Part-2vol6sl5.42.1 | Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.
---- Including cost of all materials, labour, HOM, I | Sq CM | 0.53 | 0.53 | 36000.0 | False | None | None | False | None | False | 19080.0 | 0 | | 3250657 | 112509 | None | ELE SR 2023-24PgN13 SR 2023-24 sl32.07 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
---- Including cost of all materials, labour, HOM, I | Km | 146526.45 | 146526.45 | 0.08 | False | None | None | False | None | False | 11722.116 | 0 | | 3250658 | 112509 | None | ELE SR 2023-24PgNo52 SR 2023-24 sl | Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.
---- Including cost of all materials, labour, HOM, I | Km | 21930.3 | 21930.3 | 0.08 | False | None | None | False | None | False | 1754.424 | 0 | | 3250659 | 112509 | None | SR 2023-24, Page No- 06 Vol-1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work
---- Including cost of all materials, labour, HOM, I | Mtr | 508.2 | 508.2 | 60.0 | False | None | None | False | None | False | 30492.0 | 0 | | 3250660 | 112509 | None | ELE SR 2023-24, Page No- 20 PWD Ele SR 2 ,Vol | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ---- Including cost of all materials, labour, HOM, I | Mtr | 414.75 | 414.75 | 8.0 | False | None | None | False | None | False | 3318.0 | 0 | | 3250661 | 112509 | None | ELE SR 2023-24, Page No- 05 PWD Ele SR 2 ,Vol | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. ---- Including cost of all materials, labour, HOM, I | Mtr | 44.1 | 44.1 | 40.0 | False | None | None | False | None | False | 1764.0 | 0 | | 3250662 | 112509 | None | ELE SR 2023-24, Page No- 06 PWD Ele SR 2, Vol 6 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990
---- Including cost of all materials, labour, HOM, I | Mtr | 155.4 | 155.4 | 30.5 | False | None | None | False | None | False | 4739.7 | 0 | | 3250663 | 112509 | None | ELE SR 2023-24, Page No- 16 PWD Ele SR 2, Vol | Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts,nuts,washer sand wiring etc., complete with AC-3 Rating and as per IS-13947 ---- Including cost of all materials, labour, HOM, I | Mtr | 9476.25 | 9476.25 | 1.0 | False | None | None | False | None | False | 9476.25 | 0 | | 3250664 | 112509 | None | ELE SR 2023-24, Page No- 21 PWD Ele SR 2 , Vol | Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers ---- Including cost of all materials, labour, HOM, I | Mtr | 5085.15 | 5085.15 | 1.0 | False | None | None | False | None | False | 5085.15 | 0 | | 3250665 | 112509 | None | ELE SR 2023-24, Page No- 56 PWD Ele SR 2 ,) Vol | Supplying,and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. ---- Including cost of all materials, labour, HOM, I | Mtr | 2835.0 | 2835.0 | 3.0 | False | None | None | False | None | False | 8505.0 | 0 | | 3250666 | 112509 | None | ELE SR 2023-24, Page No- 14 PWD Ele SR 2,) Vol 6 | Supplying and fixing of porcelain fuse channel with cut out on existing wooden/ pannel using necessary nuts, bolts and washers etc complete. ---- Including cost of all materials, labour, HOM, I | Each | 725.55 | 725.55 | 3.0 | False | None | None | False | None | False | 2176.65 | 0 | | 3250667 | 112509 | None | ELE SR 2023-24, (Page No- 14 PWD Ele SR 2,) Vol 6 | Supplying,fixing and wiring Electronic Trivector Meter(ETV )5to32/63A three phase 4wire whole current class-1 Accuracy Energy Meter ---- Including cost of all materials, labour, HOM, I | Each | 5990.25 | 5990.25 | 1.0 | False | None | None | False | None | False | 5990.25 | 0 | | 3250668 | 112509 | None | ELE SR 2023-24, Page No- 56 PWD Ele SR 2 ,) Vol | Fixing halogen/metal halide/SVL/IL/LED flood light fitting over existing pole/wall ceiling including clamps,bolts,nuts and wiring using suitable capacity wires ---- Including cost of all materials, labour, HOM, I | Each | 170.1 | 170.1 | 6.0 | False | None | None | False | None | False | 1020.6 | 0 | | 3250669 | 112509 | None | item no-1 | gescom charges ---- Including cost of all materials, labour, HOM, I | Rs | 15000.0 | 15000.0 | 1.0 | False | None | None | False | None | False | 15000.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | SOLAR STREET LIGHT | 450634.01 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250670 | 112510 | None | SR 2021-22 Item No : 1.4.1 , Page No 5: Vol 1 | Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per drawing and technical specifications,
including setting out, shoring, strutting, barricading, caution lights, removal
of stumps and other deleterious matter, excavated surface leveled and sides
neatly dressed disposing off the excavated stuff or sorting & stacking the
selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of
labour, tools & other appurtenaces required to complete the work. . In all kinds of soils Depth upto 1.5 m( SR 2021-22 / Item No : 1.4.1 , Page No 5: Vol 1 ) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 254.1 | 254.1 | 20.28 | False | None | None | False | None | False | 5153.148 | 0 | | 3250671 | 112510 | None | SR 2023-24 Item No : 2.1.3 , Page No : 15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 6288.45 | 6288.45 | 1.69 | False | None | None | False | None | False | 10627.4805 | 0 | | 3250672 | 112510 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 6652.8 | 6652.8 | 2.75 | False | None | None | False | None | False | 18295.2 | 0 | | 3250673 | 112510 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 532.22 | 532.22 | 2.75 | False | None | None | False | None | False | 1463.605 | 0 | | 3250674 | 112510 | None | SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 6652.8 | 6652.8 | 2.59 | False | None | None | False | None | False | 17230.752 | 0 | | 3250675 | 112510 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 ---- Including cost of all materials, labour, HOM, I | CUBIC METER | 4656.96 | 4656.96 | 2.59 | False | None | None | False | None | False | 12061.5264 | 0 | | 3250676 | 112510 | None | SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vol | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings ( SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vol 1 ) ---- Including cost of all materials, labour, HOM, I | Tonne | 93929.85 | 93929.85 | 0.68 | False | None | None | False | None | False | 63872.298 | 0 | | 3250677 | 112510 | None | SR 2023-2024 PWD Ele SR-2 SR (Vol-6) Sl No. 4.3 P. | Supplyanderectionof14FeetHeightStreetLightPole14FeetHeight
StreetLightPoleonsuitablecementconcretefoundationwith2.5Feet
height dia95mmcast irondecorative roundpedestal asper design
weighingnotlessthan37Kgs, thepedestalshallbefittedwithClass'C'
G.I.Pipe7Feet height 75mmouter diaand7 feet height toppiece
outer diaof65mmfixedbymeasureof threading/welding/coupling
complete. (excluding foundation). (SR 2023-2024 PWD Ele SR-2 SR (Vol-6) Sl No. 4.3 P.No-12) ---- Including cost of all materials, labour, HOM, I | Each | 21630.0 | 21630.0 | 10.0 | False | None | None | False | None | False | 216300.0 | 0 | | 3250678 | 112510 | None | SR 2023-2024 PWD Ele SR-2 SR (Vol-6) Sl No. 11.8.5 | Supply of LED Street light luminaire with pressure diecast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded poly carbonate material, delivering
superior light output Rated life Burning Hrs 50000 hr @Lumen
Maintenanceof70%, maximumlightintensityshouldbebetween 60degrees to
70degrees. CCT5500K, IP66optical andelectrical compartment &impact
resistanceof complete luminaire IK08. Power Factor 0.9 withmains,
SurgeProtection-Min5KValongwithOver voltage/Overload, short circuit/
miss-wiring protection. Compatibleforpolemountingwithouterdiaof40mmto
50mm.UniversalVoltagedriver tooperatewidevoltage range from100Vto
270V50/60Hz application. Compliance to IS 10322/IEC60598,LM79&
LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with
single screw to ensure ease of maintenance at the sight site locationwith
minimized minimal tools. LED Light fixture with .WSystem Power
consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire
manufacturer should have in-house facilityaccredited by NABL/CPRI &
any Government certified agency & Design & Development facility
certified by ISO9001:2008. Housingwith supplierwordmark/name shallbe
Engraved /Embossing on thediecast housing/ Bodypart.Warrantyof2Years
againstanymanufacturing defectworkingunderstandardelectricalconditionsas
mentioned above should be given by LEDmanufacturer &Cree/Nichia/
Lumileds/Osram make LED Source.(SR 2023-2024 PWD Ele SR-2 SR (Vol-6) Sl No. 11.8.5 P.No-12 ---- Including cost of all materials, labour, HOM, I | Each | 10563.0 | 10563.0 | 10.0 | False | None | None | False | None | False | 105630.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | DIESEL GEN | 534835.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250679 | 112511 | None | PWD Ele SR 2-23-24 (Page No- 42, V6) 10.1.4 | Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications.
---- Including cost of all materials, labour, HOM, I | Each | 457067.0 | 457067.0 | 1.0 | False | None | None | False | None | False | 457067.0 | 0 | | 3250680 | 112511 | None | PWD Ele SR 2-23-24 (Page No- 42, V6) 10.2.3 | Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with thermal O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.
---- Including cost of all materials, labour, HOM, I | Each | 77768.0 | 77768.0 | 1.0 | False | None | None | False | None | False | 77768.0 | 0 |
| | 1717830857000 | 0 | None | None | Buildings | PARKING SHED | 572281.28 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250681 | 112512 | None | SR 2023-24 Item No : 1.14.1 , Page No : 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 / Item No : 1.14.1 , Page No : 8 Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 32.4 | False | None | None | False | None | False | 3470.04 | 0 | | 3250682 | 112512 | None | SR 2023-24 Item No : 2.1.3 , Page No : 15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1)
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 2.7 | False | None | None | False | None | False | 16978.815 | 0 | | 3250683 | 112512 | None | SR 2023-24 Item No : 2.4.3 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 3.17 | False | None | None | False | None | False | 21089.376 | 0 | | 3250684 | 112512 | None | SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 | Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 532.22 | 532.22 | 3.17 | False | None | None | False | None | False | 1687.1374 | 0 | | 3250685 | 112512 | None | SR 2023-24 Item No : 2.4.3 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 2.96 | False | None | None | False | None | False | 19692.288 | 0 | | 3250686 | 112512 | None | SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 | Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4656.96 | 4656.96 | 2.96 | False | None | None | False | None | False | 13784.6016 | 0 | | 3250687 | 112512 | None | SR 2023-24 Item No : 2.11 a, Page No : 18 , Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings ( SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 0.68 | False | None | None | False | None | False | 63872.298 | 0 | | 3250688 | 112512 | None | SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34)
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 13.66 | False | None | None | False | None | False | 3815.238 | 0 | | 3250689 | 112512 | None | SR 2023-24 Item No : 2.1.3 , Page No : 15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1)
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 7.2 | False | None | None | False | None | False | 45276.84 | 0 | | 3250690 | 112512 | None | SR 2023-24 Item No.8.27, Page No.45 Vol 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.27, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 55.65 | 55.65 | 6.48 | False | None | None | False | None | False | 360.612 | 0 | | 3250691 | 112512 | None | SR 2023-24 Item No.8.28, Page No.45 Vol 2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.28, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 93.45 | 93.45 | 6.48 | False | None | None | False | None | False | 605.556 | 0 | | 3250692 | 112512 | None | SR 2023-24, Vol-2, Page No. 82. SL.No. 11.16.2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge (COMMON SR 2023-24, Vol-2, Page No. 82. SL.No. 11.16.2)
---- Including cost of all materials, labour, HOM, I | Kg | 154.35 | 154.35 | 2173.2 | False | None | None | False | None | False | 335433.42 | 0 | | 3250693 | 112512 | None | COMMON SR 2023-24, Vol-2, Page No. 26. SL.No. 7.38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(COMMON SR 2023-24, Vol-2, Page No. 26. SL.No. 7.38) ---- Including cost of all materials, labour, HOM, I | Sqm | 596.4 | 596.4 | 77.49 | False | None | None | False | None | False | 46215.036 | 0 |
| | 1717830857000 | 1 | None | None | Buildings | GROUND FLOOR | 10898333.65 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250694 | 112513 | None | SR 2023-24 Item No : 1.14.1 , Page No : 8 Vol 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( )
---- Including cost of all materials, labour, HOM, I | Cum | 107.1 | 107.1 | 444.88 | False | None | None | False | None | False | 47646.648 | 0 | | 3250695 | 112513 | None | SR 2023-24 Item No 2.1.3 Page No15Vol1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ()
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 57.43 | False | None | None | False | None | False | 361145.6835 | 0 | | 3250696 | 112513 | None | COMMON SR 2023-24,Vol-2, SL.No. 5.3, p. No.9 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ()
---- Including cost of all materials, labour, HOM, I | Cum | 6515.25 | 6515.25 | 76.83 | False | None | None | False | None | False | 500566.6575 | 0 | | 3250697 | 112513 | None | SR 2023-24, Vol-2 SL.No. 5.4, P. No. 9 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) ()"
---- Including cost of all materials, labour, HOM, I | Cum | 6708.45 | 6708.45 | 114.08 | False | None | None | False | None | False | 765299.976 | 0 | | 3250698 | 112513 | None | SR 2023-24, Vol-2,SL.No. 8.3.1, P. No.41 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ()
---- Including cost of all materials, labour, HOM, I | Sqm | 371.7 | 371.7 | 106.24 | False | None | None | False | None | False | 39489.408 | 0 | | 3250699 | 112513 | None | SR 2023-24 Item No : 2.4.3 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 65.14 | False | None | None | False | None | False | 433363.392 | 0 | | 3250700 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 532.22 | 532.22 | 65.14 | False | None | None | False | None | False | 34668.8108 | 0 | | 3250701 | 112513 | None | SR 2023-24 Item No : 2.4.3 , Page No : 16 , Vol -1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 9.63 | False | None | None | False | None | False | 64066.464 | 0 | | 3250702 | 112513 | None | R 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4656.96 | 4656.96 | 9.63 | False | None | None | False | None | False | 44846.5248 | 0 | | 3250703 | 112513 | None | SR 2023-24, Item No : 2.4.3 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( SR 2023-24 , Item No : 2.4.3 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6652.8 | 6652.8 | 19.18 | False | None | None | False | None | False | 127600.704 | 0 | | 3250704 | 112513 | None | R 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3326.4 | 3326.4 | 19.18 | False | None | None | False | None | False | 63800.352 | 0 | | 3250705 | 112513 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 12.24 | False | None | None | False | None | False | 87946.236 | 0 | | 3250706 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 5029.61 | 5029.61 | 12.24 | False | None | None | False | None | False | 61562.4264 | 0 | | 3250707 | 112513 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.17 | 7185.17 | 6.97 | False | None | None | False | None | False | 50080.6349 | 0 | | 3250708 | 112513 | None | R 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4311.9 | 4311.9 | 6.97 | False | None | None | False | None | False | 30053.943 | 0 | | 3250709 | 112513 | None | SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 16.02 | False | None | None | False | None | False | 115106.103 | 0 | | 3250710 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4311.09 | 4311.09 | 16.02 | False | None | None | False | None | False | 69063.6618 | 0 | | 3250711 | 112513 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 62.13 | False | None | None | False | None | False | 446413.3695 | 0 | | 3250712 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3592.58 | 3592.58 | 62.13 | False | None | None | False | None | False | 223206.9954 | 0 | | 3250713 | 112513 | None | SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 4.26 | False | None | None | False | None | False | 30608.739 | 0 | | 3250714 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3233.32 | 3233.32 | 4.26 | False | None | None | False | None | False | 13773.9432 | 0 | | 3250715 | 112513 | None | SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24,Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7185.15 | 7185.15 | 3.25 | False | None | None | False | None | False | 23351.7375 | 0 | | 3250716 | 112513 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3592.58 | 3592.58 | 3.26 | False | None | None | False | None | False | 11711.8108 | 0 | | 3250717 | 112513 | None | SR 2023-24 , Item No : 2.1.4 , Page No : 15 , Vol | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the\ work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.1.4 , Page No : 15 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6527.85 | 6527.85 | 4.14 | False | None | None | False | None | False | 27025.299 | 0 | | 3250718 | 112513 | None | SR 2023-24, Item No : 2.11 a, Page No : 18 , Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings ( SR 2023-24 , Item No : 2.11 a, Page No : 18 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | t | 93929.85 | 93929.85 | 22.92 | False | None | None | False | None | False | 2152872.162 | 0 | | 3250719 | 112513 | None | COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 34)
---- Including cost of all materials, labour, HOM, I | Cum | 279.3 | 279.3 | 199.11 | False | None | None | False | None | False | 55611.423 | 0 | | 3250720 | 112513 | None | COMMON SR 2023-24, Vol-1, SI.No.1.8, P.No -33 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work (COMMON SR 2023-24, Vol-1, SI.No.1.8, P.No -33)
---- Including cost of all materials, labour, HOM, I | Cum | 497.7 | 497.7 | 387.44 | False | None | None | False | None | False | 192828.888 | 0 | | 3250721 | 112513 | None | SR 2023-24 Item No : 2.1.3 , Page No : 15 Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1)
---- Including cost of all materials, labour, HOM, I | Cum | 6288.45 | 6288.45 | 35.13 | False | None | None | False | None | False | 220913.2485 | 0 | | 3250722 | 112513 | None | COMMON SR 2023-24, Vol-2, SL.No. 6.2, Pg. No. 13 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (COMMON SR 2023-24, Vol-2, SL.No. 6.2, Pg. No. 13)
---- Including cost of all materials, labour, HOM, I | Cum | 8376.9 | 8376.9 | 139.78 | False | None | None | False | None | False | 1170923.082 | 0 | | 3250723 | 112513 | None | COMMON SR 2023-24, Vol-2, SL.No. 6.13, Pg. No. 14 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (COMMON SR 2023-24, Vol-2, SL.No. 6.13, Pg. No. 14)
---- Including cost of all materials, labour, HOM, I | Cum | 1024.8 | 1024.8 | 23.8 | False | None | None | False | None | False | 24390.24 | 0 | | 3250724 | 112513 | None | PWD SR 2023-24 Item No.12.13.2, Page No.100 Vol 2 | Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD SR 2023-24 Item No.12.13.2, Page No.100 Vol 2)
---- Including cost of all materials, labour, HOM, I | Cum | 104580.0 | 104580.0 | 1.12 | False | None | None | False | None | False | 117129.6 | 0 | | 3250725 | 112513 | None | PWD SR 2023-24 Item No.12.57.1., Page No.105 vol 2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick Both side teak (PWD SR 2023-24 Item No.12.57.1., Page No.105 vol 2)
---- Including cost of all materials, labour, HOM, I | Cum | 4245.15 | 4245.15 | 32.62 | False | None | None | False | None | False | 138476.793 | 0 | | 3250726 | 112513 | None | PWD SR 2023-24 Item No.12.93.1., Page No.111 Vol 2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm (PWD SR 2023-24 Item No.12.93.1., Page No.111 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 737.1 | 737.1 | 24.0 | False | None | None | False | None | False | 17690.4 | 0 | | 3250727 | 112513 | None | PWD SR 2023-24 Item No.12.94.1., Page No.112 Vol 2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness (PWD SR 2023-24 Item No.12.94.1., Page No.112 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 3659.25 | 3659.25 | 7.56 | False | None | None | False | None | False | 27663.93 | 0 | | 3250728 | 112513 | None | PWD SR 2023-24 Item No.12.90, Page No.110 Vol 2 | Providing fixing of 3 track 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame The outer frame having an overall size of 108mm width 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware Multi point locking system with touch lock. Wall thickness of frame sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor T Ps shall not be made PWD SR 2023-24 Item No.12.90, Page No.110 Vol 2 ---- Including cost of all materials, labour, HOM, I | Sqm | 7070.7 | 7070.7 | 44.2 | False | None | None | False | None | False | 312524.94 | 0 | | 3250729 | 112513 | None | PWD SR 2023-24 Item No.12.85, Page No.109 Vol 2 | Providing fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. The cost is inclusive of all fixtures and separate charges for minor T P s shall not be made PWD SR 2023-24 Item No.12.85, Page No.109 Vol 2 ---- Including cost of all materials, labour, HOM, I | Sqm | 6004.95 | 6004.95 | 18.6 | False | None | None | False | None | False | 111692.07 | 0 | | 3250730 | 112513 | None | PWD SR 2023-24 Item No.11.34B, Page No.85 Vol 2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR 2023-24 Item No.11.34B, Page No.85 Vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 192.15 | 192.15 | 1105.0 | False | None | None | False | None | False | 212325.75 | 0 | | 3250731 | 112513 | None | PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerin- charge. (PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 339.15 | 339.15 | 971.27 | False | None | None | False | None | False | 329406.2205 | 0 | | 3250732 | 112513 | None | PWD SR 2023-24 Item No.8.9, Page No.42 Vol 2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.9, Page No.42 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 404.25 | 404.25 | 249.38 | False | None | None | False | None | False | 100811.865 | 0 | | 3250733 | 112513 | None | PWD SR 2023-24 Item No. 9.24, Page No.63 Vol 2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD SR 2023-24 Item No. 9.24, Page No.63 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 2994.6 | 2994.6 | 248.23 | False | None | None | False | None | False | 743349.558 | 0 | | 3250734 | 112513 | None | PWD SR 2023-24 Item No.9.12.2, Page No.60 Vol 2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (PWD SR 2023-24 Item No.9.12.2, Page No.60 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 1202.25 | 1202.25 | 186.23 | False | None | None | False | None | False | 223895.0175 | 0 | | 3250735 | 112513 | None | PWD SR 2023-24 Item No.9.11, Page No.60 Vol 2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR 2023-24 Item No.9.11, Page No.60 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 933.45 | 933.45 | 26.38 | False | None | None | False | None | False | 24624.411 | 0 | | 3250736 | 112513 | None | PWD SR 2023-24 Item No.10.14, Page No.71 Vol 2 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD SR 2023-24 Item No.10.14, Page No.71 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 1161.3 | 1161.3 | 128.67 | False | None | None | False | None | False | 149424.471 | 0 | | 3250737 | 112513 | None | SR 2023-24 Item No.8.51, Page No.50 Vol 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SR 2023-24 Item No.8.51, Page No.50 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 105.0 | 105.0 | 1301.6 | False | None | None | False | None | False | 136668.0 | 0 | | 3250738 | 112513 | None | SR 2023-24 Item No.8.54.2, Page No.50 Vol 2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (SR 2023-24 Item No.8.54.2, Page No.50 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 115.5 | 115.5 | 1301.6 | False | None | None | False | None | False | 150334.8 | 0 | | 3250739 | 112513 | None | SR 2023-24 Item No.8.27, Page No.45 Vol 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.27, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 55.65 | 55.65 | 1550.99 | False | None | None | False | None | False | 86312.5935 | 0 | | 3250740 | 112513 | None | SR 2023-24 Item No.8.28, Page No.45 Vol 2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.28, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 93.45 | 93.45 | 249.39 | False | None | None | False | None | False | 23305.4955 | 0 | | 3250741 | 112513 | None | PWD SR 2023-24 Item No.8.41, Page No.48 vol 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 175.35 | 175.35 | 44.2 | False | None | None | False | None | False | 7750.47 | 0 | | 3250742 | 112513 | None | COMMON SR 2023-24, SL No 8.34.1, VOL-2, P.No .47 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (COMMON SR 2023-24, SL No 8.34.1, VOL-2, P.No .47)
---- Including cost of all materials, labour, HOM, I | Sqm | 55.65 | 55.65 | 32.62 | False | None | None | False | None | False | 1815.303 | 0 | | 3250743 | 112513 | None | PWD SR 2023-24 Item No.11.28, Page No.85 vol 2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24 Item No.11.28, Page No.85 vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 593.25 | 593.25 | 727.2 | False | None | None | False | None | False | 431411.4 | 0 | | 3250744 | 112513 | None | SR 2023-24 ,Item No.8.16.3, Page No.43 Vol 2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 100mm wide(PWD SR 2023-24 ,Item No.8.16.3, Page No.43 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 46.2 | 46.2 | 758.8 | False | None | None | False | None | False | 35056.56 | 0 | | 3250745 | 112513 | None | SR 2023-24 Item No.10.2, Page No.69 Vol 2 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD SR 2023-24 Item No.10.2, Page No.69 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 344.4 | 344.4 | 77.6 | False | None | None | False | None | False | 26725.44 | 0 |
| | 1717830857000 | 1 | None | None | Buildings | FIRST FLOOR | 8775561.07 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3250746 | 112514 | None | SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 11.81 | False | None | None | False | None | False | 85705.17 | 0 | | 3250747 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 5079.9 | 5079.9 | 11.81 | False | None | None | False | None | False | 59993.619 | 0 | | 3250748 | 112514 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 6.67 | False | None | None | False | None | False | 48404.19 | 0 | | 3250749 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4354.2 | 4354.2 | 6.67 | False | None | None | False | None | False | 29042.514 | 0 | | 3250750 | 112514 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 15.95 | False | None | None | False | None | False | 115749.15 | 0 | | 3250751 | 112514 | None | SR 2023-24 Addendum I , Page No : 111 , Vol1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4354.2 | 4354.2 | 15.95 | False | None | None | False | None | False | 69449.49 | 0 | | 3250752 | 112514 | None | SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24, Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 57.22 | False | None | None | False | None | False | 415245.54 | 0 | | 3250753 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3628.5 | 3628.5 | 57.22 | False | None | None | False | None | False | 207622.77 | 0 | | 3250754 | 112514 | None | SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 2.42 | False | None | None | False | None | False | 17561.94 | 0 | | 3250755 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3265.65 | 3265.65 | 2.42 | False | None | None | False | None | False | 7902.873 | 0 | | 3250756 | 112514 | None | SR 2023-24 Item No : 2.5.2 , Page No : 16 , Vol 1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.2 , Page No : 16 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 7257.0 | 7257.0 | 3.26 | False | None | None | False | None | False | 23657.82 | 0 | | 3250757 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 3265.65 | 3265.65 | 3.26 | False | None | None | False | None | False | 10646.019 | 0 | | 3250758 | 112514 | None | SR 2023-24 Item No : 2.1.4 , Page No : 15 , Vol 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the\ work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 Item No : 2.1.4 , Page No : 15 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | Cum | 6593.13 | 6593.13 | 3.52 | False | None | None | False | None | False | 23207.8176 | 0 | | 3250759 | 112514 | None | SR 2023-24 Item No : 2.11 a, Page No : 18 , Vol 1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification, a. Buildings ( SR 2023-24 Item No : 2.11 a, Page No : 18 , Vol 1 )
---- Including cost of all materials, labour, HOM, I | t | 94869.15 | 94869.15 | 14.77 | False | None | None | False | None | False | 1401217.3455 | 0 | | 3250760 | 112514 | None | SR 2023-24 Vol-2, SL.No. 6.2, Pg. No. 13 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (COMMON SR 2023-24 Vol-2, SL.No. 6.2, Pg. No. 13)
---- Including cost of all materials, labour, HOM, I | Cum | 8460.67 | 8460.67 | 320.22 | False | None | None | False | None | False | 2709275.7474 | 0 | | 3250761 | 112514 | None | SR 2023-24, Vol-2, SL.No. 6.13, Pg. No. 14 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (COMMON SR 2023-24, Vol-2, SL.No. 6.13, Pg. No. 14)
---- Including cost of all materials, labour, HOM, I | Sqm | 1035.05 | 1035.05 | 10.71 | False | None | None | False | None | False | 11085.3855 | 0 | | 3250762 | 112514 | None | PWD SR 2023-24 Item No.12.13.2, Page No.100 Vol 2 | Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD SR 2023-24 Item No.12.13.2, Page No.100 Vol 2)
---- Including cost of all materials, labour, HOM, I | Cum | 105625.8 | 105625.8 | 1.07 | False | None | None | False | None | False | 113019.606 | 0 | | 3250763 | 112514 | None | PWD SR 2023-24 Item No.12.57.1., Page No.105 vol 2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick Both side teak (PWD SR 2023-24 Item No.12.57.1., Page No.105 vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 4287.6 | 4287.6 | 30.12 | False | None | None | False | None | False | 129142.512 | 0 | | 3250764 | 112514 | None | PWD SR 2023-24 Item No.12.93.1., Page No.111 Vol 2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm (PWD SR 2023-24 Item No.12.93.1., Page No.111 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 744.47 | 744.47 | 24.0 | False | None | None | False | None | False | 17867.28 | 0 | | 3250765 | 112514 | None | PWD SR 2023-24 Item No.12.94.1., Page No.112 Vol 2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness (PWD SR 2023-24 Item No.12.94.1., Page No.112 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 3695.84 | 3695.84 | 7.56 | False | None | None | False | None | False | 27940.5504 | 0 | | 3250766 | 112514 | None | PWD SR 2023-24 Item No.12.90, Page No.110 Vol 2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm 2200mm The cost is inclusive of all fixtures and separate charges for minor T Ps shall not be made PWD SR 2023-24 Item No.12.90, Page No.110 Vol 2 ---- Including cost of all materials, labour, HOM, I | Sqm | 7141.41 | 7141.41 | 51.5 | False | None | None | False | None | False | 367782.615 | 0 | | 3250767 | 112514 | None | PWD SR 2023-24 Item No.12.85, Page No.109 Vol 2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item No.12.85, Page No.109 Vol 2 ---- Including cost of all materials, labour, HOM, I | Sqm | 6065.0 | 6065.0 | 4.8 | False | None | None | False | None | False | 29112.0 | 0 | | 3250768 | 112514 | None | PWD SR 2023-24 Item No.11.34B, Page No.85 Vol 2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR 2023-24 Item No.11.34B, Page No.85 Vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 194.07 | 194.07 | 787.5 | False | None | None | False | None | False | 152830.125 | 0 | | 3250769 | 112514 | None | PWD SR 2023-24 ,Item No.8.16.3, Page No.43 Vol 2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 100mm wide(PWD SR 2023-24 ,Item No.8.16.3, Page No.43 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 46.66 | 46.66 | 758.8 | False | None | None | False | None | False | 35405.608 | 0 | | 3250770 | 112514 | None | PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerin- charge. (PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 342.54 | 342.54 | 849.52 | False | None | None | False | None | False | 290994.5808 | 0 | | 3250771 | 112514 | None | PWD SR 2023-24 Item No.8.9, Page No.42 Vol 2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.9, Page No.42 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 408.29 | 408.29 | 650.18 | False | None | None | False | None | False | 265461.9922 | 0 | | 3250772 | 112514 | None | PWD SR 2023-24 Item No. 9.24, Page No.63 Vol 2 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD SR 2023-24 Item No. 9.24, Page No.63 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 3024.55 | 3024.55 | 135.31 | False | None | None | False | None | False | 409251.8605 | 0 | | 3250773 | 112514 | None | PWD SR 2023-24 Item No.9.12.2, Page No.60 Vol 2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (PWD SR 2023-24 Item No.9.12.2, Page No.60 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 1214.27 | 1214.27 | 241.51 | False | None | None | False | None | False | 293258.3477 | 0 | | 3250774 | 112514 | None | PWD SR 2023-24 Item No.9.11, Page No.60 Vol 2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (PWD SR 2023-24 Item No.9.11, Page No.60 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 942.78 | 942.78 | 19.26 | False | None | None | False | None | False | 18157.9428 | 0 | | 3250775 | 112514 | None | PWD SR 2023-24 Item No.10.14, Page No.71 Vol 2 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD SR 2023-24 Item No.10.14, Page No.71 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 1172.91 | 1172.91 | 66.42 | False | None | None | False | None | False | 77904.6822 | 0 | | 3250776 | 112514 | None | PWD SR 2023-24 Item No.10.2, Page No.69 Vol 2 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD SR 2023-24 Item No.10.2, Page No.69 Vol 2)
---- Including cost of all materials, labour, HOM, I | m | 347.84 | 347.84 | 44.2 | False | None | None | False | None | False | 15374.528 | 0 | | 3250777 | 112514 | None | SR 2023-24 Item No.8.51, Page No.50 Vol 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SR 2023-24 Item No.8.51, Page No.50 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 106.05 | 106.05 | 1206.41 | False | None | None | False | None | False | 127939.7805 | 0 | | 3250778 | 112514 | None | SR 2023-24 Item No.8.54.2, Page No.50 Vol 2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (SR 2023-24 Item No.8.54.2, Page No.50 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 116.66 | 116.66 | 1206.41 | False | None | None | False | None | False | 140739.7906 | 0 | | 3250779 | 112514 | None | SR 2023-24 Item No.8.27, Page No.45 Vol 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.27, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 56.21 | 56.21 | 1856.59 | False | None | None | False | None | False | 104358.9239 | 0 | | 3250780 | 112514 | None | SR 2023-24 Item No.8.28, Page No.45 Vol 2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24 Item No.8.28, Page No.45 Vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 94.38 | 94.38 | 650.18 | False | None | None | False | None | False | 61363.9884 | 0 | | 3250781 | 112514 | None | PWD SR 2023-24 Item No.8.41, Page No.48 vol 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2)
---- Including cost of all materials, labour, HOM, I | Sqm | 177.1 | 177.1 | 51.5 | False | None | None | False | None | False | 9120.65 | 0 | | 3250782 | 112514 | None | SR 2023-24, SL No 8.34.1, VOL-2, P.No .47 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (COMMON SR 2023-24, SL No 8.34.1, VOL-2, P.No .47)
---- Including cost of all materials, labour, HOM, I | Sqm | 56.21 | 56.21 | 28.5 | False | None | None | False | None | False | 1601.985 | 0 | | 3250783 | 112514 | None | PWD SR 2023-24 Item No.11.28, Page No.85 vol 2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24 Item No.11.28, Page No.85 vol 2)
---- Including cost of all materials, labour, HOM, I | Kg | 599.18 | 599.18 | 831.3 | False | None | None | False | None | False | 498098.334 | 0 | | 3250784 | 112514 | None | SR 2023-24, Vol-2, Page No. 149. SL.No. 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (COMMON SR 2023-24, Vol-2, Page No. 149. SL.No. 15.1)
---- Including cost of all materials, labour, HOM, I | Sqm | 866.43 | 866.43 | 381.45 | False | None | None | False | None | False | 330499.7235 | 0 | | 3250785 | 112514 | None | SR 2023-24 ITEAM NO 2.1.3 Page no 15 V 1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in
layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SR 2023-24 ITEAM NO 2.1.3 Page no 15 V 1) ---- Including cost of all materials, labour, HOM, I | Cum | 6351.33 | 6351.33 | 2.09 | False | None | None | False | None | False | 13274.2797 | 0 | | 3250786 | 112514 | None | SR 2023-24 , Addendum I , Page No : 111 , Vol 1 | Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3
---- Including cost of all materials, labour, HOM, I | Cum | 4445.93 | 4445.93 | 2.09 | False | None | None | False | None | False | 9291.9937 | 0 |
|
|
|---|