| 1718274395000 | 1 | None | None | Buildings | Package-2 Development of park at Pump house and KAL park, construction of rest room for Poura karmikas behind TMC at Birur TMC limit Chikkamagalur district | 5005333.75 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3284521 | 114092 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 105.06 | 105.06 | 753.89 | False | None | None | False | None | False | 79203.6834 | 0 | | 3284522 | 114092 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 5833.92 | 5833.92 | 31.31 | False | None | None | False | None | False | 182660.0352 | 0 | | 3284523 | 114092 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 6580.67 | 6580.67 | 20.02 | False | None | None | False | None | False | 131745.0134 | 0 | | 3284524 | 114092 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 273.98 | 273.98 | 50.23 | False | None | None | False | None | False | 13762.0154 | 0 | | 3284525 | 114092 | None | code05 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 445.99 | 445.99 | 32.51 | False | None | None | False | None | False | 14499.1349 | 0 | | 3284526 | 114092 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | MT | 92140.71 | 92140.71 | 3.4132 | False | None | None | False | None | False | 314494.671372 | 0 | | 3284527 | 114092 | None | code07 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24 Vol-1, Item no. 2.5.2 of page no. 16) ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 6721.86 | 6721.86 | 11.75 | False | None | None | False | None | False | 78981.855 | 0 | | 3284528 | 114092 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Columns ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 11982.09 | 11982.09 | 5.07 | False | None | None | False | None | False | 60749.1963 | 0 | | 3284529 | 114092 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 10572.44 | 10572.44 | 4.16 | False | None | None | False | None | False | 43981.3504 | 0 | | 3284530 | 114092 | None | code10 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ForChejja ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 10220.02 | 10220.02 | 0.46 | False | None | None | False | None | False | 4701.2092 | 0 | | 3284531 | 114092 | None | code11 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Lintel & Roof beam ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 11277.26 | 11277.26 | 4.21 | False | None | None | False | None | False | 47477.2646 | 0 | | 3284532 | 114092 | None | code12 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Slab ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 10572.44 | 10572.44 | 21.25 | False | None | None | False | None | False | 224664.35 | 0 | | 3284533 | 114092 | None | code13 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 9140.22 | 9140.22 | 24.24 | False | None | None | False | None | False | 221558.9328 | 0 | | 3284534 | 114092 | None | code14 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 1033.09 | 1033.09 | 58.77 | False | None | None | False | None | False | 60714.6993 | 0 | | 3284535 | 114092 | None | code15 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 101779.45 | 101779.45 | 0.62 | False | None | None | False | None | False | 63103.259 | 0 | | 3284536 | 114092 | None | code16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Kg | 188.49 | 188.49 | 146.52 | False | None | None | False | None | False | 27617.5548 | 0 | | 3284537 | 114092 | None | code17 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. E.R.W. tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Kg | 133.9 | 133.9 | 196.49 | False | None | None | False | None | False | 26310.011 | 0 | | 3284538 | 114092 | None | code18 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 248.23 | 248.23 | 110.66 | False | None | None | False | None | False | 27469.1318 | 0 | | 3284539 | 114092 | None | code19 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 303.85 | 303.85 | 238.03 | False | None | None | False | None | False | 72325.4155 | 0 | | 3284540 | 114092 | None | code20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 1108.28 | 1108.28 | 41.2 | False | None | None | False | None | False | 45661.136 | 0 | | 3284541 | 114092 | None | code21 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : * Flamed finish granite stone slab Black, Cat Eye, River Pink or quivalent ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 2539.98 | 2539.98 | 34.62 | False | None | None | False | None | False | 87934.1076 | 0 | | 3284542 | 114092 | None | code22 | 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 1433.76 | 1433.76 | 44.21 | False | None | None | False | None | False | 63386.5296 | 0 | | 3284543 | 114092 | None | code23 | Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labour charges, usage charges complete as perspecifications. (excluding cost of fixtures) ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 7223.39 | 7223.39 | 28.64 | False | None | None | False | None | False | 206877.8896 | 0 | | 3284544 | 114092 | None | code24 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 327.54 | 327.54 | 24.75 | False | None | None | False | None | False | 8106.615 | 0 | | 3284545 | 114092 | None | code25 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. - 30 mm thick one side teak and one side commercial ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 3597.79 | 3597.79 | 7.88 | False | None | None | False | None | False | 28350.5852 | 0 | | 3284546 | 114092 | None | code26 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 123.6 | 123.6 | 2.0 | False | None | None | False | None | False | 247.2 | 0 | | 3284547 | 114092 | None | code27 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 1178.24 | 1178.24 | 2.0 | False | None | None | False | None | False | 2356.48 | 0 | | 3284548 | 114092 | None | code28 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 265.44 | 265.44 | 18.0 | False | None | None | False | None | False | 4777.92 | 0 | | 3284549 | 114092 | None | code29 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 145.6 | 145.6 | 14.0 | False | None | None | False | None | False | 2038.4 | 0 | | 3284550 | 114092 | None | code30 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.for 150mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 306.88 | 306.88 | 13.0 | False | None | None | False | None | False | 3989.44 | 0 | | 3284551 | 114092 | None | code31 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Kg | 581.95 | 581.95 | 73.62 | False | None | None | False | None | False | 42843.159 | 0 | | 3284552 | 114092 | None | code32 | Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 5890.57 | 5890.57 | 1.35 | False | None | None | False | None | False | 7952.2695 | 0 | | 3284553 | 114092 | None | code33 | Distempering with oil bound washable distemper of approved brand an manufacture to give an even shade : New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 141.11 | 141.11 | 110.66 | False | None | None | False | None | False | 15615.2326 | 0 | | 3284554 | 114092 | None | code34 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 183.34 | 183.34 | 238.03 | False | None | None | False | None | False | 43640.4202 | 0 | | 3284555 | 114092 | None | code35 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 142.14 | 142.14 | 53.09 | False | None | None | False | None | False | 7546.2126 | 0 | | 3284556 | 114092 | None | code36 | Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 181.28 | 181.28 | 28.8 | False | None | None | False | None | False | 5220.864 | 0 | | 3284557 | 114092 | None | code37 | Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete. 1200 mmx1250 mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 9830.32 | 9830.32 | 2.0 | False | None | None | False | None | False | 19660.64 | 0 | | 3284558 | 114092 | None | code38 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. 1.6.1 In all kinds of soils. Depth upto 1.50m ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 498.52 | 498.52 | 50.0 | False | None | None | False | None | False | 24926.0 | 0 | | 3284559 | 114092 | None | code39 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC ) pipes having thermal stability for hot and cold water supply, including all CPVC plains and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes and fittings with one step CPVC solvents cement and testing of joints complete as per direction of Engineer in Charge. 20mm nominal dia pipes ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 249.26 | 249.26 | 40.0 | False | None | None | False | None | False | 9970.4 | 0 | | 3284560 | 114092 | None | code40 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC ) pipes having thermal stability for hot and cold water supply, including all CPVC plains and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes and fittings with one step CPVC solvents cement and testing of joints complete as per direction of Engineer in Charge. 25mm nominal dia pipes ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 327.54 | 327.54 | 30.0 | False | None | None | False | None | False | 9826.2 | 0 | | 3284561 | 114092 | None | code41 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC ) pipes having thermal stability for hot and cold water supply, including all CPVC plains and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes and fittings with one step CPVC solvents cement and testing of joints complete as per direction of Engineer in Charge. 32mm nominal dia pipes ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 412.0 | 412.0 | 20.0 | False | None | None | False | None | False | 8240.0 | 0 | | 3284562 | 114092 | None | code42 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expansion (i) single socketes pipes 100mm diameter. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 299.73 | 299.73 | 12.0 | False | None | None | False | None | False | 3596.76 | 0 | | 3284563 | 114092 | None | code43 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expansion (i) single socketes pipes 75mm diameter. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 202.91 | 202.91 | 30.0 | False | None | None | False | None | False | 6087.3 | 0 | | 3284564 | 114092 | None | code44 | 13.64 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes m ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 396.55 | 396.55 | 15.0 | False | None | None | False | None | False | 5948.25 | 0 | | 3284565 | 114092 | None | code45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS ;12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support at the bottom ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Ltr | 9.27 | 9.27 | 4000.0 | False | None | None | False | None | False | 37080.0 | 0 | | 3284566 | 114092 | None | code46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 2415.35 | 2415.35 | 2.0 | False | None | None | False | None | False | 4830.7 | 0 | | 3284567 | 114092 | None | code47 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 5030.52 | 5030.52 | 3.0 | False | None | None | False | None | False | 15091.56 | 0 | | 3284568 | 114092 | None | code48 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 14.3.1 W.C. pan with ISI marked white solid plastic seat and lid ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 4983.14 | 4983.14 | 3.0 | False | None | None | False | None | False | 14949.42 | 0 | | 3284569 | 114092 | None | code49 | 14.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 4587.62 | 4587.62 | 3.0 | False | None | None | False | None | False | 13762.86 | 0 | | 3284570 | 114092 | None | code50 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 294.58 | 294.58 | 10.0 | False | None | None | False | None | False | 2945.8 | 0 | | 3284571 | 114092 | None | code51 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 746.75 | 746.75 | 4.0 | False | None | None | False | None | False | 2987.0 | 0 | | 3284572 | 114092 | None | code52 | Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 48.41 | 48.41 | 4.0 | False | None | None | False | None | False | 193.64 | 0 | | 3284573 | 114092 | None | code53 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 5811.26 | 5811.26 | 3.0 | False | None | None | False | None | False | 17433.78 | 0 | | 3284574 | 114092 | None | code54 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 488.22 | 488.22 | 327.19 | False | None | None | False | None | False | 159740.7018 | 0 | | 3284575 | 114092 | None | code55 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 2635.77 | 2635.77 | 245.39 | False | None | None | False | None | False | 646791.6003 | 0 | | 3284576 | 114092 | None | code56 | Supplying and fixing M15 grade precast cement concrete Kerb
stones for Roadway, Sidewalls and gutters fixed with CM 1:3
fixed and finsihed in line as per direction of Engineer in charge.
(The cost of PCC shall be paid extra) 600 x 300 x 100 mm size ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 273.98 | 273.98 | 1090.62 | False | None | None | False | None | False | 298808.0676 | 0 | | 3284577 | 114092 | None | code57 | Providing and laying 60mm thick factory made cement concrete paver
block of approved shape and colour of M -30 grade made of C&D waste
by block making machine with vibratory compaction laid in required
pattern and including over 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Sqm | 824.0 | 824.0 | 1526.87 | False | None | None | False | None | False | 1258140.88 | 0 | | 3284578 | 114092 | None | code58 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 6403.51 | 6403.51 | 6.0 | False | None | None | False | None | False | 38421.06 | 0 | | 3284579 | 114092 | None | code59 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 1256.6 | 1256.6 | 4.0 | False | None | None | False | None | False | 5026.4 | 0 | | 3284580 | 114092 | None | code60 | Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 71.07 | 71.07 | 30.0 | False | None | None | False | None | False | 2132.1 | 0 | | 3284581 | 114092 | None | code61 | Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 83.43 | 83.43 | 20.0 | False | None | None | False | None | False | 1668.6 | 0 | | 3284582 | 114092 | None | code62 | Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 70.04 | 70.04 | 35.0 | False | None | None | False | None | False | 2451.4 | 0 | | 3284583 | 114092 | None | code63 | Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 81.37 | 81.37 | 25.0 | False | None | None | False | None | False | 2034.25 | 0 | | 3284584 | 114092 | None | code64 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 50.47 | 50.47 | 10.0 | False | None | None | False | None | False | 504.7 | 0 | | 3284585 | 114092 | None | code65 | Supplying and fixing PVC/metal conduit Deep junction box25 mm deep Junction box ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 57.68 | 57.68 | 5.0 | False | None | None | False | None | False | 288.4 | 0 | | 3284586 | 114092 | None | code66 | Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF
screws and on either end of the pipe terminated completely 32mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 29.87 | 29.87 | 5.0 | False | None | None | False | None | False | 149.35 | 0 | | 3284587 | 114092 | None | code67 | Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF
screws and on either end of the pipe terminated completely Supplying And Fixing Metal Fan Box with Round Hook. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 120.51 | 120.51 | 4.0 | False | None | None | False | None | False | 482.04 | 0 | | 3284588 | 114092 | None | code68 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch box ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Point | 277.07 | 277.07 | 3.0 | False | None | None | False | None | False | 831.21 | 0 | | 3284589 | 114092 | None | code69 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let
via switch box ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Point | 390.37 | 390.37 | 4.0 | False | None | None | False | None | False | 1561.48 | 0 | | 3284590 | 114092 | None | code70 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let viawitch box ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Point | 571.65 | 571.65 | 5.0 | False | None | None | False | None | False | 2858.25 | 0 | | 3284591 | 114092 | None | code71 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block. complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point toout let via switches ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Point | 697.31 | 697.31 | 3.0 | False | None | None | False | None | False | 2091.93 | 0 | | 3284592 | 114092 | None | code72 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 26.78 | 26.78 | 30.0 | False | None | None | False | None | False | 803.4 | 0 | | 3284593 | 114092 | None | code73 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 43.26 | 43.26 | 45.0 | False | None | None | False | None | False | 1946.7 | 0 | | 3284594 | 114092 | None | code74 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 mm2 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | m | 64.89 | 64.89 | 10.0 | False | None | None | False | None | False | 648.9 | 0 | | 3284595 | 114092 | None | code75 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 1-2 Way ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 142.14 | 142.14 | 4.0 | False | None | None | False | None | False | 568.56 | 0 | | 3284596 | 114092 | None | code76 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 4-5 Way ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 182.31 | 182.31 | 1.0 | False | None | None | False | None | False | 182.31 | 0 | | 3284597 | 114092 | None | code77 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 6 Way ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 226.6 | 226.6 | 2.0 | False | None | None | False | None | False | 453.2 | 0 | | 3284598 | 114092 | None | code78 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 8 Way ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 268.83 | 268.83 | 2.0 | False | None | None | False | None | False | 537.66 | 0 | | 3284599 | 114092 | None | code79 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 10-12 Way ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 328.57 | 328.57 | 4.0 | False | None | None | False | None | False | 1314.28 | 0 | | 3284600 | 114092 | None | code80 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete onhe existing metal/PVC box. 1 to 2 Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 141.11 | 141.11 | 4.0 | False | None | None | False | None | False | 564.44 | 0 | | 3284601 | 114092 | None | code81 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete onhe existing metal/PVC box. 4 Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 180.25 | 180.25 | 1.0 | False | None | None | False | None | False | 180.25 | 0 | | 3284602 | 114092 | None | code82 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete onhe existing metal/PVC box. 6 Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 241.02 | 241.02 | 2.0 | False | None | None | False | None | False | 482.04 | 0 | | 3284603 | 114092 | None | code83 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete onhe existing metal/PVC box. 8 Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 292.52 | 292.52 | 2.0 | False | None | None | False | None | False | 585.04 | 0 | | 3284604 | 114092 | None | code84 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete onhe existing metal/PVC box. 10-12 Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 354.32 | 354.32 | 4.0 | False | None | None | False | None | False | 1417.28 | 0 | | 3284605 | 114092 | None | code85 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 105.06 | 105.06 | 50.0 | False | None | None | False | None | False | 5253.0 | 0 | | 3284606 | 114092 | None | code86 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 176.13 | 176.13 | 4.0 | False | None | None | False | None | False | 704.52 | 0 | | 3284607 | 114092 | None | code87 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 367.71 | 367.71 | 15.0 | False | None | None | False | None | False | 5515.65 | 0 | | 3284608 | 114092 | None | code88 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 185.4 | 185.4 | 2.0 | False | None | None | False | None | False | 370.8 | 0 | | 3284609 | 114092 | None | code89 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 243.08 | 243.08 | 2.0 | False | None | None | False | None | False | 486.16 | 0 | | 3284610 | 114092 | None | code90 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 335.78 | 335.78 | 2.0 | False | None | None | False | None | False | 671.56 | 0 | | 3284611 | 114092 | None | code91 | Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80 mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 15.45 | 15.45 | 2.0 | False | None | None | False | None | False | 30.9 | 0 | | 3284612 | 114092 | None | code92 | Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 21.63 | 21.63 | 4.0 | False | None | None | False | None | False | 86.52 | 0 | | 3284613 | 114092 | None | code93 | Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts and washers. 32A ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 248.23 | 248.23 | 1.0 | False | None | None | False | None | False | 248.23 | 0 | | 3284614 | 114092 | None | code94 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.II - Double Door 16 Way SP & N ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 2995.24 | 2995.24 | 1.0 | False | None | None | False | None | False | 2995.24 | 0 | | 3284615 | 114092 | None | code95 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A SP ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 835.33 | 835.33 | 1.0 | False | None | None | False | None | False | 835.33 | 0 | | 3284616 | 114092 | None | code96 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 1421.4 | 1421.4 | 1.0 | False | None | None | False | None | False | 1421.4 | 0 | | 3284617 | 114092 | None | code97 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 1536.76 | 1536.76 | 2.0 | False | None | None | False | None | False | 3073.52 | 0 | | 3284618 | 114092 | None | code98 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with
double ball bearing system. 48" Sweep (1200 mm) Regular model ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 3073.52 | 3073.52 | 2.0 | False | None | None | False | None | False | 6147.04 | 0 | | 3284619 | 114092 | None | code99 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 125.66 | 125.66 | 25.0 | False | None | None | False | None | False | 3141.5 | 0 | | 3284620 | 114092 | None | code100 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 324.45 | 324.45 | 2.0 | False | None | None | False | None | False | 648.9 | 0 | | 3284621 | 114092 | None | code101 | Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh
and wooden frame. ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 728.21 | 728.21 | 2.0 | False | None | None | False | None | False | 1456.42 | 0 | | 3284622 | 114092 | None | code102 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 BESCOM PART 3 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Km | 146097.26 | 146097.26 | 0.03 | False | None | None | False | None | False | 4382.9178 | 0 | | 3284623 | 114092 | None | code103 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth In Hard Soil ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Cum | 400.67 | 400.67 | 11.0 | False | None | None | False | None | False | 4407.37 | 0 | | 3284624 | 114092 | None | code104 | Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete.2 kVA OFF LINE UPS ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 21931.79 | 21931.79 | 1.0 | False | None | None | False | None | False | 21931.79 | 0 | | 3284625 | 114092 | None | code105 | Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 29032.61 | 29032.61 | 1.0 | False | None | None | False | None | False | 29032.61 | 0 | | 3284626 | 114092 | None | code106 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 73.13 | 73.13 | 2.0 | False | None | None | False | None | False | 146.26 | 0 | | 3284627 | 114092 | None | code107 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70 percent. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7W, 6500K ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 153.47 | 153.47 | 2.0 | False | None | None | False | None | False | 306.94 | 0 | | 3284628 | 114092 | None | code108 | Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified BESCOM PART 3 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 2237.16 | 2237.16 | 1.0 | False | None | None | False | None | False | 2237.16 | 0 | | 3284629 | 114092 | None | code109 | Bentonite clay slurry for earthing in 50 Kg Bag BESCOM PART 3 ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 379.04 | 379.04 | 1.0 | False | None | None | False | None | False | 379.04 | 0 | | 3284630 | 114092 | None | code110 | Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 696.28 | 696.28 | 1.0 | False | None | None | False | None | False | 696.28 | 0 | | 3284631 | 114092 | None | code111 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Bag | 319.3 | 319.3 | 1.0 | False | None | None | False | None | False | 319.3 | 0 | | 3284632 | 114092 | None | code112 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 300 mm x 214 mm ---- Including cost of all lead, lift, loading, and unloading charges and as per the directions of the enginner incharge at site | Each | 4647.36 | 4647.36 | 1.0 | False | None | None | False | None | False | 4647.36 | 0 |
|