| 3306765 | 115316 | None | HG1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting. barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated carth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 285.6 | 285.6 | 6.52 | False | None | None | False | None | False | 1862.112 | 0 |
| 3306766 | 115316 | None | HG2 | Providing Filling in foundation with granite/trap broken metal 100mm and down size with approved sand including hand packing, ramming, watering including cost of all materials and labour with lead up to 50m and lift or 1.5m complete as per specification. | Cum | 2689.05 | 2689.05 | 3.65 | False | None | None | False | None | False | 9815.0325 | 0 |
| 3306767 | 115316 | None | HG3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8(M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5466.3 | 5466.3 | 1.37 | False | None | None | False | None | False | 7488.831 | 0 |
| 3306768 | 115316 | None | HG4 | Providing Size stone manory with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 Coarse sand) including with all lead and lift charges | Cum | 5619.6 | 5619.6 | 2.06 | False | None | None | False | None | False | 11576.376 | 0 |
| 3306769 | 115316 | None | hg5 | Filling avilable excavated earth (excluding rock) in trenches, plinth, sides of foundation and similar works etc., in layers not exceeding 20cm in depth, consolited layer by ramming and watering, leadupto 50m and lift up to 1.5m including with all lead and lift charges. | Cum | 214.2 | 214.2 | 1.8 | False | None | None | False | None | False | 385.56 | 0 |
| 3306770 | 115316 | None | HG6 | Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost meludes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including with all lead and lift charges | Cum | 6014.4 | 6014.4 | 0.81 | False | None | None | False | None | False | 4871.664 | 0 |
| 3306771 | 115316 | None | HG7 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1255.8 | 1255.8 | 19.92 | False | None | None | False | None | False | 25015.536 | 0 |
| 3306772 | 115316 | None | HG8 | Additionalities for formwork, Centering & Scaffolding for lintels 60% | Cum | 10385.76 | 10385.76 | 0.35 | False | None | None | False | None | False | 3635.016 | 0 |
| 3306773 | 115316 | None | HG9 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 96.6 | 96.6 | 135.0 | False | None | None | False | None | False | 13041.0 | 0 |
| 3306774 | 115316 | None | hg10 | Providing 15 mm cement plaster on the rough side of single or half brick wall
of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 260.4 | 260.4 | 25.86 | False | None | None | False | None | False | 6733.944 | 0 |
| 3306775 | 115316 | None | HG11 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-chargeSQM | Sqm | 313.95 | 313.95 | 22.06 | False | None | None | False | None | False | 6925.737 | 0 |
| 3306776 | 115316 | None | HG12 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Sqm | 3843.0 | 3843.0 | 1.89 | False | None | None | False | None | False | 7263.27 | 0 |
| 3306777 | 115316 | None | HG13 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelamSQM | Sqm | 2998.8 | 2998.8 | 1.58 | False | None | None | False | None | False | 4738.104 | 0 |
| 3306778 | 115316 | None | HG14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 800.1 | 800.1 | 18.4 | False | None | None | False | None | False | 14721.84 | 0 |
| 3306779 | 115316 | None | HG15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. including with all lead and lift charges. | Sqm | 110.25 | 110.25 | 10.66 | False | None | None | False | None | False | 1175.265 | 0 |
| 3306780 | 115316 | None | HG16 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. including with all lead and lift charges. | Sqm | 117.6 | 117.6 | 22.06 | False | None | None | False | None | False | 2594.256 | 0 |
| 3306781 | 115316 | None | HG17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- | Sqm | 94.5 | 94.5 | 4.25 | False | None | None | False | None | False | 401.625 | 0 |
| 3306782 | 115316 | None | HG18 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | Pan | 5255.25 | 5255.25 | 1.0 | False | None | None | False | None | False | 5255.25 | 0 |
| 3306783 | 115316 | None | HG19 | Providing and fixing unplasticised PVC connection pipe with brass unions :20 mm nominal bore | Nos | 133.35 | 133.35 | 1.0 | False | None | None | False | None | False | 133.35 | 0 |
| 3306784 | 115316 | None | HG20 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g | Nos | 155.4 | 155.4 | 2.0 | False | None | None | False | None | False | 310.8 | 0 |
| 3306785 | 115316 | None | HG21 | Providing and fixing Chorinated poly Vinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in charge. | Sqm | 331.8 | 331.8 | 10.0 | False | None | None | False | None | False | 3318.0 | 0 |
| 3306786 | 115316 | None | HG22 | PVC pipe of 8Kg/cm2 for 110mm (1.894) | Mtr | 348.6 | 348.6 | 5.0 | False | None | None | False | None | False | 1743.0 | 0 |
| 3306787 | 115316 | None | HG23 | Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances,. | Each | 9818.55 | 9818.55 | 1.0 | False | None | None | False | None | False | 9818.55 | 0 |
| 3306788 | 115316 | None | hg24 | 18 mm thick Flamed finished granite stone slab | Sqm | 1000.0 | 1000.0 | 2.25 | False | None | None | False | None | False | 2250.0 | 0 |
| 3306789 | 115316 | None | HG25 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer- in-Charge. | Kg | 116.55 | 116.55 | 37.8 | False | None | None | False | None | False | 4405.59 | 0 |
| 3306790 | 115316 | None | HG26 | Providing and placing on terrace(at all floors levels) polythylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet and outlet and overflow pipes but without fittings and the base support for tank | Ltr | 8.4 | 8.4 | 500.0 | False | None | None | False | None | False | 4200.0 | 0 |
| 3306791 | 115316 | None | HG27 | Add GST | No | 30468.42 | 30468.42 | 1.0 | False | None | None | False | None | False | 30468.42 | 0 |
| 3306792 | 115316 | None | HG28 | Miscellaneous and rounding off | No | 263.34 | 263.34 | 1.0 | False | None | None | False | None | False | 263.34 | 0 |
| 3306793 | 115316 | None | hg29 | Additonalities for Formwork Centering & Scaffolding for Roof 50% | Cum | 9736.55 | 9736.55 | 1.53 | False | None | None | False | None | False | 14896.9215 | 0 |