| 1718788019000 | 0 | None | None | Other Works | Construction of Open Gym at Shalini Park and Kothari Layout in ward no. 61, Hubli | 1558889.09 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3310089 | 115573 | None | 001 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work | Cum | 95.55 | 95.55 | 7.7 | False | None | None | False | None | False | 735.735 | 0 | | 3310090 | 115573 | None | 002 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 6.24 | False | None | None | False | None | False | 40733.784 | 0 | | 3310091 | 115573 | None | 003 | Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size | Mtr | 486.15 | 486.15 | 57.0 | False | None | None | False | None | False | 27710.55 | 0 | | 3310092 | 115573 | None | 004 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge | Cum | 6999.3 | 6999.3 | 2.57 | False | None | None | False | None | False | 17988.201 | 0 | | 3310093 | 115573 | None | 005 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work | Cum | 497.7 | 497.7 | 40.73 | False | None | None | False | None | False | 20271.321 | 0 | | 3310094 | 115573 | None | 006 | Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) | Sqm | 1219.05 | 1219.05 | 135.75 | False | None | None | False | None | False | 165486.0375 | 0 | | 3310095 | 115573 | None | 007 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 175.35 | 175.35 | 51.3 | False | None | None | False | None | False | 8995.455 | 0 | | 3310096 | 115573 | None | 008 | Providing Supplying, faxing, installation, commissioning and trial run of Tai chi Wheel. Metal All tubular steel of 2.5mm thickness are galvanized and zinc dipped joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges and burns. Zinc primer paint is applied at all the welded points prior to finishing. All metal parts are powder coated using AKZO Nobel-Great wall powder to the thickness of 80-120 microns. All metal Parts are to be tested in salt spray machine that uses a 5% NaC solution in accordance to IS07227 to handle corrosion for 3000Hrs. Rubber: High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings. Scope of delivery:1 Completely pre- assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide Safety. All products must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size L Xw x H: 1120x1150x1620mm (min) Weight: 39.00KG (min) Safety Area: 3520x3550mm (min).Capacity 3 persons The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in faing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer- in-charge | Each | 91869.0 | 91869.0 | 1.0 | False | None | None | False | None | False | 91869.0 | 0 | | 3310097 | 115573 | None | 009 | Providing Supplying, fixing, installation, commissioning and trial run of Air Walker. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped joints are robotic welded.All welded joints are scalloped as necessary and welded to an approved MIG process.All welds are dressed off removing all sharpedges and burns.Zinc primer paint is applied at all the welded points prior to finishing. All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns.All metal Parts are to be testedin salt spraymachine that uses a 5% NaC solution in accordance to IS07227 to handle corrosion for 3000Hrs. Rubber:High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings.Scope of delivery:1 Completely pre-assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide Safety: All products must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16530 certificates must be issued by a reputed notified International certifying agency such as IPEMA, TUV, CPSC or SGS only.The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size LxWxH: 1065 x615x1364mm (min) Weight: 51KG (min) Safety Area: 4090x3555mm (min), Capacity 1 persons The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the equipment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc.required to complete the work. As per the direction of Engineer-in-charge | Each | 118627.0 | 118627.0 | 2.0 | False | None | None | False | None | False | 237254.0 | 0 | | 3310098 | 115573 | None | 010 | Providing Supplying, faxing, installation, commissioning and trial run of Pull Up Chair. Metal: All tubular steel of 2.5mm thickness are galvanized and zinc dipped joints are robotic welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges and burns Zinc primer paint is applied at all the welded points prior to finishing. All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns All metal Parts are to be testedin salt spray machine that uses a 5% NaC solution in accordance to IS07227 to handle corrosion for 3000Hrs. Rubber: High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings. Scope of delivery:1 Completely pre- assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide, Safety. All products must be tested and certified to meet EN 16630 safety standards with GS test mark The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size LxWxH: 2570 x805x2685mm (min) Weight: 85.40KG (min) Safety Area: 6287x4848mm (min),Capacity 2 persons The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer- in-charge | Each | 196226.0 | 196226.0 | 1.0 | False | None | None | False | None | False | 196226.0 | 0 | | 3310099 | 115573 | None | 011 | Providing, Supplying, fixing, installation, commissioning and trial run of Leg Press. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welded.All welded joints are scalloped as necessary and welded to an approved MIG process.All welds are dressed off removing all sharpedges and burns.Zinc primer paint is applied at all the welded points prior to finishing, All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns.All metal Parts are to be testedin salt spraymachine that uses a 5% NaCl solution in accordance to ISO7227 to handle corrosion for 3000Hrs. Rubber:High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings.Scope of delivery:1 Completely pre-assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide, Safety: All products must be tested and certified to meet EN 16630 safety standards with GSN test mark.The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only.The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size LxWxH: 2270 x635x1640mm (min) Weight: 60.20KG (min) Safety Area: 5300x3685mm (min), Capacity 2 persons. The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge | Each | 176603.0 | 176603.0 | 1.0 | False | None | None | False | None | False | 176603.0 | 0 | | 3310100 | 115573 | None | 012 | Providing. Supplying, fixing, installation, commissioning and trial run of Seated chest Press. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welded All welded joints are scalloped as necessary and welded to an approved MIG process.All welds are dressed off removing all sharpedges and burns.Zinc primer paint is applied at all the welded points prior to finishing. All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns. All metal Parts are to be testedin salt spraymachine that uses a 5%Na solution in accordance to ISO7227 to handle corrosion for 3000Hrs. Rubber:High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings. Scope of delivery:1 Completely pre-assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide, Safety: All products must be tested and certified to meet EN 16630 safety standards with GS test mark.The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only.The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size LxWxH: 1955 x733x2058mm (min) Weight: 86.60KG (min) Safety Area: 5545x4470mm (min), Capacity 2 persons The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge | Each | 187305.0 | 187305.0 | 1.0 | False | None | None | False | None | False | 187305.0 | 0 | | 3310101 | 115573 | None | 013 | Providing, Supplying, fixing, Installation, commissioning and trial run of Cross Walker. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped.joints are robotic welded.All welded joints are scalloped as necessary and welded to an approved MIG process.All welds are dressed off removing all sharpedges and burns.Zinc primer paint is applied at all the welded points prior to finishing. All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns. All metal Parts are to be testedin salt spraymachine that uses a 5% NaC solution in accordance to ISO 7227 to handle corrosion for 3000Hrs. Rubber:High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings.Scope of delivery:1 Completely pre- assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide,Safety: All products must be tested and certified to meet EN 16630 safety standards with GS test mark.The EN 16630 certificates must be issued by a reputed notified international certifying agency such as IPEMA, TUV, CPSC or SGS only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. Size LxWxH: 2015 x615x1360mm (min) Weight: 93 KG (min) Safety Area: 5015x3015mm (min),Capacity 2 persons. The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the eqiupment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge | Each | 186922.0 | 186922.0 | 1.0 | False | None | None | False | None | False | 186922.0 | 0 | | 3310102 | 115573 | None | 014 | Waist Twister Triple Providing Supplying, fixing, installation, commissioning and trial run of Waist Twister. Metal Al tubular steel of 2.5mm thickness are galvanized and zinc dipped joints are robotic welded.All welded joints are scalloped as necessary and welded to an approved MIG process.All welds are dressed off removing all sharpedges and burns Zinc primer paint is applied at all the welded points prior to finishing All metal parts are powder coated using AKZO nobel-Great wall powder to the thickness of 80-120 microns. All metal Parts are to be testedin salt spraymachine that uses a 5% NaC solution in accordance to 1507227 to handle corrosion for 3000Hrs. Rubber High quality grip rubber is used for the handles. Bearings Maintenance free ball bearings Scope of delivery 1 Completely pre- assembled equipment model, Maintenance: Maintain according to EN 16630 and as per maintenance guide Safety. All products must be tested and certified to meet EN 16630 safety standards with GS test mark. The EN 16630 certificates must be issued by a reputed notified International certifying agency such as PEMA, TUV, CPSC or 565 only. The GS mark EN 16630 Certificates must be in the name of tendering party and not any 3rd Party. All products must clearly display the GS mark as issued in the EN 16630 safety certificates. See LxWxH: 1460 x1310x1150mm m) Weight: 29.105 (min) Safety Area 4360x4510mm (min) Capacity 3 persons The work includers at other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fong The equipment on site as per the site condition. The cost includes, cost of transportation, cost fat labour, HOM of machinery etc., required to complete the work. As per the direction of Engineer-in-charge | Each | 200789.0 | 200789.0 | 1.0 | False | None | None | False | None | False | 200789.0 | 0 |
|