| 1718802592000 | 0 | None | None | Buildings | CONSTRUCTION OF ELECTRIC POWER LOOM CENTER IN GROUND FLOOR, ADMINISTRATIVE OFFICE BUILDING AND MARKETING CENTER IN FIRST FLOOR AT C-51 AND C-52 IN INDUSTRIAL ESTATE, UDYAMBAG IN BELAGAVI CITY | 8572303.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3313502 | 115748 | None | code01 | Earth work in surface excavation for stripping, seating of bund, Road way, bymanual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. | Sqm | 99.75 | 99.75 | 688.7376 | False | None | None | False | None | False | 68701.5756 | 0 | | 3313503 | 115748 | None | code02 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m | Cum | 107.1 | 107.1 | 621.94 | False | None | None | False | None | False | 66609.774 | 0 | | 3313504 | 115748 | None | code03 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. -do- Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 62.25 | False | None | None | False | None | False | 406358.6625 | 0 | | 3313505 | 115748 | None | code04 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.
-do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7185.02 | 7185.02 | 101.616 | False | None | None | False | None | False | 730112.99232 | 0 | | 3313506 | 115748 | None | code05 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9979.2 | 9979.2 | 28.773 | False | None | None | False | None | False | 287131.5216 | 0 | | 3313507 | 115748 | None | code06 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12214.75 | 12214.75 | 21.433 | False | None | None | False | None | False | 261798.73675 | 0 | | 3313508 | 115748 | None | code07 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Beam & Lintel | Cum | 11496.24 | 11496.24 | 27.94 | False | None | None | False | None | False | 321204.9456 | 0 | | 3313509 | 115748 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Roof Slab. | Cum | 10777.7 | 10777.7 | 57.71 | False | None | None | False | None | False | 621981.067 | 0 | | 3313510 | 115748 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Staircase | Cum | 10777.72 | 10777.72 | 3.45 | False | None | None | False | None | False | 37183.134 | 0 | | 3313511 | 115748 | None | code10 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. -do- M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Chajja | Cum | 10418.46 | 10418.46 | 1.38 | False | None | None | False | None | False | 14377.4748 | 0 | | 3313512 | 115748 | None | code11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (a) Buildings | MT | 93929.85 | 93929.85 | 28.25 | False | None | None | False | None | False | 2653518.2625 | 0 | | 3313513 | 115748 | None | code12 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8376.9 | 8376.9 | 52.5376 | False | None | None | False | None | False | 440102.22144 | 0 | | 3313514 | 115748 | None | code13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. & Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | Sqm | 1212.75 | 1212.75 | 143.58 | False | None | None | False | None | False | 174126.645 | 0 | | 3313515 | 115748 | None | code14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 584.0 | False | None | None | False | None | False | 163111.2 | 0 | | 3313516 | 115748 | None | code15 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete
as per specifications. | Cum | 130412.1 | 130412.1 | 0.46 | False | None | None | False | None | False | 59989.566 | 0 | | 3313517 | 115748 | None | code16 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1066.8 | 1066.8 | 8.0 | False | None | None | False | None | False | 8534.4 | 0 | | 3313518 | 115748 | None | code17 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2628.15 | 2628.15 | 12.0 | False | None | None | False | None | False | 31537.8 | 0 | | 3313519 | 115748 | None | code18 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 40 mm thick both side Teak | Sqm | 5208.0 | 5208.0 | 4.83 | False | None | None | False | None | False | 25154.64 | 0 | | 3313520 | 115748 | None | code19 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick Both side teak | Sqm | 4245.15 | 4245.15 | 15.57 | False | None | None | False | None | False | 66096.9855 | 0 | | 3313521 | 115748 | None | code20 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Rmtr | 333.9 | 333.9 | 15.29 | False | None | None | False | None | False | 5105.331 | 0 | | 3313522 | 115748 | None | code21 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam | Sqm | 2484.3 | 2484.3 | 5.22 | False | None | None | False | None | False | 12968.046 | 0 | | 3313523 | 115748 | None | code22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 192.15 | 192.15 | 1034.37 | False | None | None | False | None | False | 198754.1955 | 0 | | 3313524 | 115748 | None | code23 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm.Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm .Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 7070.7 | 7070.7 | 57.465 | False | None | None | False | None | False | 406317.7755 | 0 | | 3313525 | 115748 | None | code24 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 221.55 | 221.55 | 387.48 | False | None | None | False | None | False | 85846.194 | 0 | | 3313526 | 115748 | None | code25 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 809.753 | False | None | None | False | None | False | 216811.36575 | 0 | | 3313527 | 115748 | None | code26 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in charge. | Sqm | 404.25 | 404.25 | 324.576 | False | None | None | False | None | False | 131209.848 | 0 | | 3313528 | 115748 | None | code27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 105.0 | 105.0 | 1197.2 | False | None | None | False | None | False | 125706.0 | 0 | | 3313529 | 115748 | None | code28 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 1202.25 | 1202.25 | 168.3018 | False | None | None | False | None | False | 202340.83905 | 0 | | 3313530 | 115748 | None | code29 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. | Sqm | 840.0 | 840.0 | 24.02 | False | None | None | False | None | False | 20176.8 | 0 | | 3313531 | 115748 | None | code30 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1161.3 | 1161.3 | 9.6 | False | None | None | False | None | False | 11148.48 | 0 | | 3313532 | 115748 | None | code31 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1521.45 | 1521.45 | 32.034 | False | None | None | False | None | False | 48738.1293 | 0 | | 3313533 | 115748 | None | code32 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. | Sqm | 5594.4 | 5594.4 | 27.405 | False | None | None | False | None | False | 153314.532 | 0 | | 3313534 | 115748 | None | code33 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. | Sqm | 171.15 | 171.15 | 1197.23 | False | None | None | False | None | False | 204905.9145 | 0 | | 3313535 | 115748 | None | code34 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 182.7 | 182.7 | 324.576 | False | None | None | False | None | False | 59300.0352 | 0 | | 3313536 | 115748 | None | code35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 175.35 | 175.35 | 97.97 | False | None | None | False | None | False | 17179.0395 | 0 | | 3313537 | 115748 | None | code36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 593.25 | 593.25 | 249.2 | False | None | None | False | None | False | 147837.9 | 0 | | 3313538 | 115748 | None | code37 | Providing and injecting chemical emulsion for Pre constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 123.9 | 123.9 | 412.26 | False | None | None | False | None | False | 51079.014 | 0 | | 3313539 | 115748 | None | code38 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Nos | 1104.6 | 1104.6 | 11.0 | False | None | None | False | None | False | 12150.6 | 0 | | 3313540 | 115748 | None | code39 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete | Nos | 248.85 | 248.85 | 22.0 | False | None | None | False | None | False | 5474.7 | 0 | | 3313541 | 115748 | None | code40 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
-do- 125x85x5.5 mm (heavy type) | Nos | 288.75 | 288.75 | 33.0 | False | None | None | False | None | False | 9528.75 | 0 | | 3313542 | 115748 | None | code41 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : -do- 250x10mm | Nos | 456.75 | 456.75 | 11.0 | False | None | None | False | None | False | 5024.25 | 0 | | 3313543 | 115748 | None | code42 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms | Nos | 57.75 | 57.75 | 8.0 | False | None | None | False | None | False | 462.0 | 0 | | 3313544 | 115748 | None | code43 | Providing and fixing bright finished brass handles with screws etc. complete: -do- Bright finished brass latch | Nos | 299.25 | 299.25 | 11.0 | False | None | None | False | None | False | 3291.75 | 0 |
|