| 3315233 | 115832 | None | bet01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work n all kinds of soils upto 300 mm depth [SR-2021-22 Vol-1,I No-1.12 Page No-8] | Centimeter | 65.0 | 65.0 | 22.5 | False | None | None | False | None | False | 1462.5 | 0 |
| 3315234 | 115832 | None | bet02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates(Page N0-15 Item No2.1.2/V-1/S.R-2020-21) | Centimeter | 229.0 | 229.0 | 71.22 | False | None | None | False | None | False | 16309.38 | 0 |
| 3315235 | 115832 | None | bet03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates(Page N0-15 Item No2.1.2/V-1/S.R-2020-21) | Centimeter | 5122.0 | 5122.0 | 19.7 | False | None | None | False | None | False | 100903.4 | 0 |
| 3315236 | 115832 | None | bet04 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Page N0-8 Item No5.3/V2/S.R-2020-21) | Centimeter | 5162.0 | 5162.0 | 24.28 | False | None | None | False | None | False | 125333.36 | 0 |
| 3315237 | 115832 | None | bet05 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page N0-15/ Item No 2.2.1.1/V-2/S.R-2021-22) Add 8% for Shuttering works as per Apendix-1 of SR2021-22 /V-1(P.N-115) | Centimeter | 463.57 | 463.57 | 13.45 | False | None | None | False | None | False | 6235.0165 | 0 |
| 3315238 | 115832 | None | bet06 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page N0-15/ Item No 2.2.1.1/V-2/S.R-2021-22) Add 70% for Shuttering works as per Apendix-1 of SR2021-22 /V-1(P.N-115) | Centimeter | 9841.3 | 9841.3 | 5.86 | False | None | None | False | None | False | 57670.018 | 0 |
| 3315239 | 115832 | None | bet07 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page N0-15/ Item No 2.2.1.1/V-2/S.R-2021-22) Add 50% for Shuttering works as per Apendix-1 of SR2021-22 /V-1(P.N-115) | Centimeter | 8683.5 | 8683.5 | 25.45 | False | None | None | False | None | False | 220995.075 | 0 |
| 3315240 | 115832 | None | bet08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page N0-15/ Item No 2.2.1.1/V-2/S.R-2021-22) Add 45% for Shuttering works as per Apendix-1 of SR2021-22 /V-1(P.N-115) | Centimeter | 8394.05 | 8394.05 | 0.9765 | False | None | None | False | None | False | 8196.789825 | 0 |
| 3315241 | 115832 | None | bet09 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) ( volume 2 item no. 11.32/page No-84 2021-2022) | Kg | 90.0 | 90.0 | 3429.9 | False | None | None | False | None | False | 308691.0 | 0 |
| 3315242 | 115832 | None | bet10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Page N0-7 Item No 1.9/V-1/S.R-2020-21) | Centimeter | 204.0 | 204.0 | 71.22 | False | None | None | False | None | False | 14528.88 | 0 |
| 3315243 | 115832 | None | bet11 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge ( Vol-2/Item No-8.19.1 Page No-44/S.R-2020-21) | Sqm | 198.0 | 198.0 | 15.68 | False | None | None | False | None | False | 3104.64 | 0 |
| 3315244 | 115832 | None | bet12 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ( Page No-13/Item No-6.2/V-2/ S.R-2021-22) | Centimeter | 6665.0 | 6665.0 | 29.43 | False | None | None | False | None | False | 196150.95 | 0 |
| 3315245 | 115832 | None | bet13 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Page No-41/Item No-8.2.2/V-2/ S.R-2021-22) | Sqm | 228.0 | 228.0 | 367.74 | False | None | None | False | None | False | 83844.72 | 0 |
| 3315246 | 115832 | None | bet14 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (Page N0-100 Item No 12.12/V-2/S.R-2021-22) | Centimeter | 75344.0 | 75344.0 | 0.17 | False | None | None | False | None | False | 12808.48 | 0 |
| 3315247 | 115832 | None | bet15 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)( Vol-2/Item No-12.15 Page No-100/S.R-2020-21) | Sqm | 4556.0 | 4556.0 | 4.41 | False | None | None | False | None | False | 20091.96 | 0 |
| 3315248 | 115832 | None | bet16 | Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.( Page No-85/Item No-11.34.B/V-2/ S.R-2021-22) | Kg | 143.0 | 143.0 | 302.4 | False | None | None | False | None | False | 43243.2 | 0 |
| 3315249 | 115832 | None | bet17 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge.( Vol-2/Item No-11.26.1/ Page No-82/S.R-2021-22) | Kg | 111.0 | 111.0 | 189.0 | False | None | None | False | None | False | 20979.0 | 0 |
| 3315250 | 115832 | None | bet18 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete .Size of Tile 600x600 mm ( Page No-61/Item No-9.17.2/V-2/ S.R-2021-22) | Sqm | 1097.0 | 1097.0 | 103.62 | False | None | None | False | None | False | 113671.14 | 0 |
| 3315251 | 115832 | None | bet19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( Vol-2/Item No-831/ Page No-46/S.R-2021-22) | Sqm | 132.0 | 132.0 | 159.43 | False | None | None | False | None | False | 21044.76 | 0 |
| 3315252 | 115832 | None | bet20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( Vol-2/Item No-8.25/ Page No-45/S.R-2021-22) | Sqm | 105.0 | 105.0 | 192.95 | False | None | None | False | None | False | 20259.75 | 0 |
| 3315253 | 115832 | None | bet21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. ( Vol-2/Item No-11.35.1.2./ Page No-86/S.R-2021-22) | Kg | 388.0 | 388.0 | 847.2 | False | None | None | False | None | False | 328713.6 | 0 |
| 3315254 | 115832 | None | bet22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.( Vol-2/Item No-11.37.1/ Page No-88/S.R-2021-22) | Sqm | 798.0 | 798.0 | 84.72 | False | None | None | False | None | False | 67606.56 | 0 |
| 3315255 | 115832 | None | bet23 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page N0-81 Item No 11.16.1/V-2/S.R-2021-22) | Kg | 109.0 | 109.0 | 200.0 | False | None | None | False | None | False | 21800.0 | 0 |
| 3315256 | 115832 | None | bet24 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per d setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.In ordinary/soft rock without blasting upto 1.5 m depth ( Page No-6/Item No-1.5.1/V-1/ S.R-2021-22) | Centimeter | 229.0 | 229.0 | 13.74 | False | None | None | False | None | False | 3146.46 | 0 |
| 3315257 | 115832 | None | bet25 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates(Page N0-15 Item No2.1.2/V-1/S.R-2020-21) | Centimeter | 5122.0 | 5122.0 | 2.66 | False | None | None | False | None | False | 13624.52 | 0 |
| 3315258 | 115832 | None | bet26 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Page N0-8 Item No5.3/V2/S.R-2020-21) | Centimeter | 5162.0 | 5162.0 | 1.15 | False | None | None | False | None | False | 5936.3 | 0 |
| 3315259 | 115832 | None | bet27 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (Page N0-15 Item No2.1.4/V-1/S.R-2021-22) | Centimeter | 5622.0 | 5622.0 | 2.96 | False | None | None | False | None | False | 16641.12 | 0 |
| 3315260 | 115832 | None | bet28 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ( Page No-13/Item No-6.2/V-2/ S.R-2021-22) | Centimeter | 6665.0 | 6665.0 | 3.19 | False | None | None | False | None | False | 21261.35 | 0 |
| 3315261 | 115832 | None | bet29 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( Page No-41/Item No-8.2.2/V-2/ S.R-2021-22) | Sqm | 228.0 | 228.0 | 27.78 | False | None | None | False | None | False | 6333.84 | 0 |
| 3315262 | 115832 | None | bet30 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Item No-2.2.1.1Page No-15/V-1/S.R-201-22) Add50% for Shuttering works as per Apendix-1 of SR2021-22 /V-1(P.N-115) | Centimeter | 6947.0 | 6947.0 | 0.72 | False | None | None | False | None | False | 5001.84 | 0 |
| 3315263 | 115832 | None | bet31 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) ( volume 2 item no. 11.32/page No-84 2021-2022) | Kg | 90.0 | 90.0 | 57.6 | False | None | None | False | None | False | 5184.0 | 0 |
| 3315264 | 115832 | None | bet32 | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.( Page No-111/Item No-13. H140A/WS& UGD S.R-2021-22) | No | 2111.0 | 2111.0 | 1.0 | False | None | None | False | None | False | 2111.0 | 0 |
| 3315265 | 115832 | None | bet33 | Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments 1.00 HP/0.75KW .7 STG( Page No-158/Item No-6.1P060A/WS& UGD S.R-2021-22) | Each | 13475.0 | 13475.0 | 1.0 | False | None | None | False | None | False | 13475.0 | 0 |
| 3315266 | 115832 | None | bet34 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 20mm nominal OD pipes(PWD SR- 2018-19 Page No-99/ I.No-13.87.2) | Each | 146.0 | 146.0 | 100.0 | False | None | None | False | None | False | 14600.0 | 0 |
| 3315267 | 115832 | None | bet35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required ( Page No-123/Item No-14.12.2/V-2/ S.R-2021-22) | Each | 3922.0 | 3922.0 | 1.0 | False | None | None | False | None | False | 3922.0 | 0 |
| 3315268 | 115832 | None | bet36 | KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 (P.No.-96/I.No.13.78 of CSR 2018-19) | Each | 6720.0 | 6720.0 | 1.0 | False | None | None | False | None | False | 6720.0 | 0 |
| 3315269 | 115832 | None | bet37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps:( Page No-124/Item No-14.7.1/V-2/ S.R-2021-22) | Each | 2529.0 | 2529.0 | 1.0 | False | None | None | False | None | False | 2529.0 | 0 |
| 3315270 | 115832 | None | bet38 | Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances., complete 900 mmx1100 mm (P.No.-203/I.No.62.1 of WS& UGD-2021-22) | Each | 6029.0 | 6029.0 | 1.0 | False | None | None | False | None | False | 6029.0 | 0 |
| 3315271 | 115832 | None | bet39 | Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. ( Vol-2/Item No-17.12/ Page No-152/S.R-2021-22) | Sqm | 833.0 | 833.0 | 1.77 | False | None | None | False | None | False | 1474.41 | 0 |
| 3315272 | 115832 | None | bet40 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. forPVC pipes 110mm dia., 6 kg/sqcm & class 3(P.No.-134/I.No.1.7/ WS& UGD-2021-22) | Each | 496.44 | 496.44 | 10.0 | False | None | None | False | None | False | 4964.4 | 0 |
| 3315273 | 115832 | None | bet41 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page No 75 Item No11.5.1/V-2/S.R-2021-22) | Sqm | 3660.0 | 3660.0 | 1.58 | False | None | None | False | None | False | 5782.8 | 0 |
| 3315274 | 115832 | None | bet42 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.PVC pipes 90mm dia., 6 kg/sqcm & class 3 M010F(P.No.-134/I.No.1.6/ WS& UGD-2021-22) | m | 281.0 | 281.0 | 30.0 | False | None | None | False | None | False | 8430.0 | 0 |
| 3315275 | 115832 | None | bet43 | Concealed PVC Conduit. Supplying Heavy Gauge PVC Conduit pipe ……dia......mm dia thick confirming to IS 2059 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. Make;Sudhakar Polimers Limited. [p, 2 item no 1. 2] | m | 44.29 | 44.29 | 75.0 | False | None | None | False | None | False | 3321.75 | 0 |
| 3315276 | 115832 | None | bet44 | Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick(1.3.1) | m | 58.24 | 58.24 | 35.0 | False | None | None | False | None | False | 2038.4 | 0 |
| 3315277 | 115832 | None | bet45 | Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box (1.5.1) | No | 48.88 | 48.88 | 7.0 | False | None | None | False | None | False | 342.16 | 0 |
| 3315278 | 115832 | None | bet46 | Supplying and flush mounting teak wooden box without front lank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete (1.5.1) 12"x9"x3" (300x228x76) | Each | 101.92 | 101.92 | 1.0 | False | None | None | False | None | False | 101.92 | 0 |
| 3315279 | 115832 | None | bet47 | Supplying and flush mounting teak wooden box without front lank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete (1.5.1) 10"x7"x3" (254x178x76mm) | Each | 90.48 | 90.48 | 3.0 | False | None | None | False | None | False | 271.44 | 0 |
| 3315280 | 115832 | None | bet48 | Supplying and flush mounting teak wooden box without front lank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete (1.5.1) 8"x6"x3" (203x152x76mm) | Each | 75.72 | 75.72 | 1.0 | False | None | None | False | None | False | 75.72 | 0 |
| 3315281 | 115832 | None | bet49 | Supplying And Fixing "S" Hook made out of 14mm dia M.S.Rod.(1.10) | No | 34.44 | 34.44 | 4.0 | False | None | None | False | None | False | 137.76 | 0 |
| 3315282 | 115832 | None | bet50 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch | Each | 180.96 | 180.96 | 4.0 | False | None | None | False | None | False | 723.84 | 0 |
| 3315283 | 115832 | None | bet51 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out | Each | 254.8 | 254.8 | 8.0 | False | None | None | False | None | False | 2038.4 | 0 |
| 3315284 | 115832 | None | bet52 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch | Each | 501.28 | 501.28 | 4.0 | False | None | None | False | None | False | 2005.12 | 0 |
| 3315285 | 115832 | None | bet53 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 3C X 1.5Sq.mm | Each | 19.34 | 19.34 | 70.0 | False | None | None | False | None | False | 1353.8 | 0 |
| 3315286 | 115832 | None | bet54 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 3C X 2.5Sq.mm | Each | 30.37 | 30.37 | 130.0 | False | None | None | False | None | False | 3948.1 | 0 |
| 3315287 | 115832 | None | bet55 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT lesserthan 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire lesserthan IK08. Power Factor lesserthan 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency lesserthan 130lm/w, nominal CRI lesserthan 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 24watts | No | 7050.24 | 7050.24 | 1.0 | False | None | None | False | None | False | 7050.24 | 0 |
| 3315288 | 115832 | None | bet56 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200mm) Regular model | No | 2423.52 | 2423.52 | 4.0 | False | None | None | False | None | False | 9694.08 | 0 |
| 3315289 | 115832 | None | bet57 | Supplying box type suitable for 28W T5 Single/twin Lamp & Suspention mounted luminaire & opticle reflector. Prewired with HF electonic Ballast. Push fit type lamp holders & main connectors. Channel cover shall be made of CRCAMS sheet and finishing is done with stone enamlled white with end camp made of engineering plasttic 1X4'-28 watts | No | 1009.8 | 1009.8 | 8.0 | False | None | None | False | None | False | 8078.4 | 0 |
| 3315290 | 115832 | None | bet58 | Supplying fixing and wiring earth electrode for grounding Conduits, I.C cutouts and other equipments on the meter board using 40mm dia 2.9mm thick 2.5mtr long buried in a pit The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of Size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 2836.08 | 2836.08 | 1.0 | False | None | None | False | None | False | 2836.08 | 0 |
| 3315291 | 115832 | None | bet59 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 2 core 10 sqmm | m | 91.1 | 91.1 | 40.0 | False | None | None | False | None | False | 3644.0 | 0 |
| 3315292 | 115832 | None | bet60 | Digging of trench of 0.6mm deep x 0.50mtr wide refiling the trench to the required ground level and consolidating etc. [p, no, 61 I no, 7.9] In soil [ordinary] B.R 78.00+ 4% A.W 3.12=81.12 [p, no, 62 I no, 7.9.1] | m | 81.12 | 81.12 | 30.0 | False | None | None | False | None | False | 2433.6 | 0 |
| 3315293 | 115832 | None | bet61 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV 40mm | m | 358.8 | 358.8 | 4.0 | False | None | None | False | None | False | 1435.2 | 0 |