| 1718851893000 | 0 | None | None | Buildings | Construction of hi-tech toilet for Government Higher Primary School at Soratoor village approved under School Education and Literacy Scheme for the year 2023-24 | 220320.84 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3314116 | 115787 | None | SOR01 | Formwork For Lintels,Beams (P NO-115, I No-12) (PWD SR 2021-22) Volume-1 | Sqm | 1298.22 | 1298.22 | 0.48 | False | None | None | False | None | False | 623.1456 | 0 | | 3314117 | 115787 | None | SOR02 | Formwork For Roof (P NO-116, I No-13) (PWD SR 2021-22) Volume-1 | Sqm | 1298.22 | 1298.22 | 31.62 | False | None | None | False | None | False | 41049.7164 | 0 | | 3314118 | 115787 | None | SOE03 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(PWD SR 2021-22/P.No.42 I NO 8.9 Volume-2) | Sqm | 345.45 | 345.45 | 54.42 | False | None | None | False | None | False | 18799.389 | 0 | | 3314119 | 115787 | None | SOR04 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22/P.No.41 I NO 8.1.1 Volume-2) | Sqm | 228.9 | 228.9 | 130.41 | False | None | None | False | None | False | 29850.849 | 0 | | 3314120 | 115787 | None | SOR05 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.(PWD SR 2021-22/P.No.60 I NO 9.11 Volume-2) | Sqm | 811.65 | 811.65 | 19.26 | False | None | None | False | None | False | 15632.379 | 0 | | 3314121 | 115787 | None | SOR06 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm
thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over existing rough plaster surface using glazed tiles of approved
make and size including cost of materials, labour, complete as per
specifications(P-65, INo-9.38) (PWD SR 2021-22) Volume-2 | Sqm | 2061.15 | 2061.15 | 28.44 | False | None | None | False | None | False | 58619.106 | 0 | | 3314122 | 115787 | None | SOR07 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(P-87, INo-11.35.2.2) (PWD SR 2021-22) Volume-2 | Sqm | 477.75 | 477.75 | 19.2 | False | None | None | False | None | False | 9172.8 | 0 | | 3314123 | 115787 | None | SOR08 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. [P.No-45 ,I.No-8.25] (PWD SR 2021-22) Volume-2 | Sqm | 110.25 | 110.25 | 63.0 | False | None | None | False | None | False | 6945.75 | 0 | | 3314124 | 115787 | None | SOR09 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. [P.No-46 ,I.No-8.32] (PWD SR 2021-22) Volume-2 | Sqm | 117.6 | 117.6 | 54.42 | False | None | None | False | None | False | 6399.792 | 0 | | 3314125 | 115787 | None | SOR10 | Water supply & sanitary | LS | 3000.0 | 3000.0 | 1.0 | False | None | None | False | None | False | 3000.0 | 0 | | 3314126 | 115787 | None | SOR11 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail
& bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers
specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with one side prelam [P.No-106 ,I.No-12.55.2 ] (PWD SR 2021-22) Volume-2. | Sqm | 2998.8 | 2998.8 | 10.08 | False | None | None | False | None | False | 30227.904 | 0 |
|