createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1717997961340 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2850.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 01-07-2024 16:00:00 tenderQueryClose 27-06-2024 11:00:00 technicalBidOpen 02-07-2024 16:30:00 publishedDate 20-06-2024 18:21:28 publishedByPost PWD_EE_DIV_RCR publishedByUser KPE15695 - K SHANKAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 14-06-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Chandrashekar TA splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08532225778 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1717997961374 version 6 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT10618 title Construction Of New School Building in UGHPS Goudanabhavi Village in Maski taluk of Raichur district. Under - KARNATAKA SAMAGRA SHIKSHANA SCHEME/2022-23 description Construction Of New School Building in UGHPS Goudanabhavi Village in Maski taluk of Raichur district. Under -KARNATAKA SAMAGRA SHIKSHANA SCHEME/2022-23. category WORKS categoryText Works ecv 11375226.95 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1695 locationName PWD Division Office Raichuru provisionalAmount 13543000.0 groupOverheadTotal None fileNumber AEE/PWD/MSK/RMSA/SCHOOL/8443/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1717997961000 1 None None Buildings WATER SUPPLY FOR TOILET 357597.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253836 112721 None PWD SR VOL II 2023-24. I. No. 13.34 P.NO.123 WATER SUPPLY WORKS P/F STORAGE TANK Providing and placing on terrace (on all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 3253837 112721 None PWD SR VOL II 2023-24. I. No. 13.34 P.NO.123 P/F STORAGE TANK Providing and placing on terrace (on all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 3253838 112721 None PWD SR VOL II 2023-24. I. No. 13.33.5 P.NO.123 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). Mtr 500.85 500.85 15.0 False None None False None False 7512.75 0 3253839 112721 None PWD SR VOL II 2023-24. I. No. 13.33.4 P.NO.122 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete. (external work). - 32mm nominal doa pipes m 390.6 390.6 15.0 False None None False None False 5859.0 0 3253840 112721 None PWD SR VOL II 2023-24. I. No. 13.32.3 P.NO.122 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step solvent cement & the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25mm nominal dia pipes m 500.85 500.85 15.0 False None None False None False 7512.75 0 3253841 112721 None PWD SR VOL II 2023-24. I. No. 13.32.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step solvent cement & the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20mm nominal dia pipes m 397.95 397.95 15.0 False None None False None False 5969.25 0 3253842 112721 None PWD SR VOL II 2023-24. I. No. 13.2.1 P.NO.117 P/F BRASS BIBCOCK Nos 300.3 300.3 15.0 False None None False None False 4504.5 0 3253843 112721 None PWD SR VOL II 2023-24. I. No. 13.5.2 P/F BRASS BALL VALVE Nos 329.7 329.7 10.0 False None None False None False 3297.0 0 3253844 112721 None PWD SR VOL II 2023-24. I. No. 14.7.2 P/F WASH BASIN Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15mm C.P. brass pillar tap Each 2689.05 2689.05 4.0 False None None False None False 10756.2 0 3253845 112721 None PWD SR VOL II 2023-24. I. No. 13.8.2.2 PVC connection pipe Nos 115.5 115.5 4.0 False None None False None False 462.0 0 3253846 112721 None PWD SR VOL II 2023-24. I. No. 14.3.2 Page No. 131 SANITARY WORK WATER CLOSET Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 6095.25 6095.25 16.0 False None None False None False 97524.0 0 3253847 112721 None PWD SR VOL II 2023-24. No. 14.29 Page No. 136 GULLY TRAP Each 49.35 49.35 10.0 False None None False None False 493.5 0 3253848 112721 None PWD CSR VOL I 2023-24I. No. 1.6.1 Page No.6 EARTH WORK EXCAVATION Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m Cum 508.2 508.2 46.08 False None None False None False 23417.856 0 3253849 112721 None WS&UGD CSR 2023-24 I.No.16.9 SOR CODE: T130B P.No. BRICK MASONRY FOR INSPECTION CHAMBER Constructing brick masonry chamber of internal dimension 600x600 mm and depth of 600 mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150 mm thick with 1:3:6, lastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75 mm thick for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 5726.7 5726.7 1.09 False None None False None False 6242.103 0 3253850 112721 None WS &UGD CSR 2023-24. No16.1.2 P.No.184 P/F STONEWARE PIPE Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 150 mm dia. pipes m 610.05 610.05 10.0 False None None False None False 6100.5 0 3253851 112721 None WS &UGD CSR 2023-24. No 16.5.1 SOR CODE: T070A P.N Labour charges for laying and jointing glazed stone ware pipes of 0.6m length and of specified dia., of tested quality conforming to IS 651 of 1965 including caulking with hemp yarn, jointing with CM 1:2 and testing with water etc. complete for: (Rate to include cost of jointing materials and trasportation of pipes from store work site ) m 74.55 74.55 10.0 False None None False None False 745.5 0 3253852 112721 None WS &UGD CSR 2023-24. I.No.10.1.7 P.No.113 Supplying PVC ring tight pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials)with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110 mm outer dia., 6 kg/sqcm & class 3 m 413.7 413.7 30.0 False None None False None False 12411.0 0 3253853 112721 None PWD CSR VOL I 2023-24 I. No.2.1.2 P.No.15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 2.0 False None None False None False 11894.4 0 3253854 112721 None PWD SR VOL II 2023-24 I.No. 6.8 P.No.14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 8.92 False None None False None False 74637.654 0 3253855 112721 None PWD SR VOL II 2023-24 I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 5.4 False None None False None False 5533.92 0 3253856 112721 None PWD CSR VOL I 2023-24, I. No. 2.3.1 P.No.16 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7966.98 7966.98 1.51 False None None False None False 12030.1398 0 3253857 112721 None PWD SR VOL II 2023-24, I. No. 8.8 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 486.94 486.94 36.4 False None None False None False 17724.616 0 3253858 112721 None PWD SR VOL II2023-24. I. No. 13.40 Providing & Fixing square - mouth S.W. guly trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I cover 180x150 mm size P type & with non-modular common burnt clay bricks of designation 3.5 & frame of 300 x 300mm size (inside) the weight of cover to be not less than4.50 kg and frame to be not less than 2.70 Kg as per standard design : Each 2820.3 2820.3 1.0 False None None False None False 2820.3 0 3253859 112721 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, achinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.1 False None None False None False 9392.985 0 3253860 112721 None PWD CSR VOL I 2023-24, I. No.6 P.No.111 Additionalities for Formwork, Centering & Scaffolding 20% of I.No. 21 Cum 1593.4 1593.4 1.51 False None None False None False 2406.034 0 1717997961000 1 None None Buildings WATER SUMP 99845.35 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253861 112722 None PWD SR VOL I 2023-24 I.No.1.5.2 P.No.6 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavatedsurface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, Cum 467.25 467.25 1.88 False None None False None False 878.43 0 3253862 112722 None PWD SR VOL I 2023-24 I.No.1.12 P.No.6 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 99.75 99.75 56.25 False None None False None False 5610.9375 0 3253863 112722 None PWD SR VOL I 2023-24 I.No.2.1.2 P.No.15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Cum 5947.2 5947.2 1.25 False None None False None False 7434.0 0 3253864 112722 None PWD DSR 2023-24 vol-1 I.No.2.2.3 P No.15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 7.55 False None None False None False 50228.64 0 3253865 112722 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.38 False None None False None False 35693.343 0 1717997961000 1 None None Buildings PUMPING MACHINARY 83381.55 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253866 112723 None WS & UGD Vol V CSR-2023-24 No.13.11.3 P No-151 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP Each 27205.5 27205.5 1.0 False None None False None False 27205.5 0 3253867 112723 None WS & UGD -Vol V CSR - 2023-24 i. No. 13.22.3 ,P Submersible Cables: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (1X3X4 m2) Mtr 141.75 141.75 90.0 False None None False None False 12757.5 0 3253868 112723 None WS & UGD -Vol V CSR -2023-24 I.No. 13.23.1 ,P N Pressure Guage: Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. a.63mm Each 436.8 436.8 1.0 False None None False None False 436.8 0 3253869 112723 None WS & UGD -Vol V - 2023-24 No. 27.1 ,P No-162 Gate Valve: Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments size 50mm Each 1312.5 1312.5 1.0 False None None False None False 1312.5 0 3253870 112723 None WS & UGD -Vol V - 2023-24 No. 13.43.1 P No-157 Outdoor type Board: upto 6 HP Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter Each 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3253871 112723 None WS & UGD -Vol V - 2023-24 No. 13.25 ,P No-162 Power capacitor Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 3.0 False None None False None False 1732.5 0 3253872 112723 None WS & UGD -Vol V CSR-2023-24 I. No. 32 ,P No-162 MCB Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3253873 112723 None WS & UGD -Vol V CSR -2023-24 No. 13.32 HDPE Pipe: Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : PE80 (PN 6.0 / 6 Kg/cm2) a. 63mm Mtr 198.45 198.45 65.0 False None None False None False 12899.25 0 3253874 112723 None WS & UGD Works Vol V CSR for the 2021-22 No. 13.32 Errection,Electrification and commisioning works of Submersible Pump sets: Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3253875 112723 None WS & UGD -Vol V CSR -2023-24 No. 13.33 Pump sets: Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1417.5 1417.5 1.0 False None None False None False 1417.5 0 3253876 112723 None WS & UGD -Vol V CSR -2023-24 No. 13.38.2 Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen insulating compound complete with terminals clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. Sqm Each 472.5 472.5 1.0 False None None False None False 472.5 0 3253877 112723 None WS & UGD -Vol V CSR -2023-24 No. 13.27.1 Collar: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) a.50 mm Each 3202.5 3202.5 1.0 False None None False None False 3202.5 0 3253878 112723 None WS & UGD -Vol V CSR- 2023-24 No.13.39 Earthing Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 1717997961000 1 None None Buildings GROUND FLOOR SCHOOL 7135031.15 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253879 112724 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth Cum 99.75 99.75 240.0 False None None False None False 23940.0 0 3253880 112724 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 376.88 False None None False None False 40363.848 0 3253881 112724 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 63.21 False None None False None False 375922.512 0 3253882 112724 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite /trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 26.78 False None None False None False 178161.984 0 3253883 112724 None PWD CSR VOL I - 2023-24. I. No.2 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Footing 8% Cum 532.22 532.22 28.44 False None None False None False 15136.3368 0 3253884 112724 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The nite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, ding all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 23.16 False None None False None False 154078.848 0 3253885 112724 None PWD CSR VOL I - 2023-24. I. No.2 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Plinth Beam 50% Cum 3326.4 3326.4 23.17 False None None False None False 77072.688 0 3253886 112724 None PWD CSR VOL I - 2023-24. I. No. 1.11 P.No. 7 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 454.65 454.65 416.67 False None None False None False 189439.0155 0 3253887 112724 None PWD CSR VOL II - 2023-24. I. No. 4.1 P.No. 5 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 142.1 False None None False None False 17606.19 0 3253888 112724 None PWD CSR VOL I - 2023-24. I. No. 2.4.1P.No.16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Sqm 6724.2 6724.2 2.5 False None None False None False 16810.5 0 3253889 112724 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 1.01 False None None False None False 7257.0015 0 3253890 112724 None PWD CSR VOL I - 2023-24. I. No.15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for chejja 45% Cum 3233.32 3233.32 1.35 False None None False None False 4364.982 0 3253891 112724 None PWD DSR 2021-22 V - 1 I.No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 17.79 False None None False None False 1671012.0315 0 3253892 112724 None PWD CSR VOL II - 2023-24. I. No. 5.2 P.No. 9 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 6948.9 6948.9 55.24 False None None False None False 383857.236 0 3253893 112724 None PWD CSR VOL II - 2023-24. I. No. 5.3 P.No. 9 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)) Cum 6515.25 6515.25 42.67 False None None False None False 278005.7175 0 3253894 112724 None PWD CSR VOL II - 2023-24. I. No. 6.5 P.No.13 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 11525.85 11525.85 86.52 False None None False None False 997216.542 0 3253895 112724 None PWD CSR VOL II - 2023-24. I. No.11.10.1 P.No.79 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 46.2 46.2 1350.0 False None None False None False 62370.0 0 3253896 112724 None PWD CSR VOL II - 2023-24. I. No.11.37.1 P.No.89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 1037.4 1037.4 27.0 False None None False None False 28009.8 0 3253897 112724 None PWD CSR VOL II - 2023-24. I. No.12.15 P.No.100 Providing and fixing in position fully panelled Matti/ Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) the Engineer-in-Charge. Sqm 6904.8 6904.8 15.12 False None None False None False 104400.576 0 3253898 112724 None PWD CSR VOL II - 2023-24. I. No.7.6 P.No.21 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) Rmtr 677.25 677.25 14.0 False None None False None False 9481.5 0 3253899 112724 None PWD CSR VOL II - 2023-24. I. No.7.25.1 P.No Providing and fixing Green Board As Per Market Rate complete. Sqm 666.75 666.75 6.0 False None None False None False 4000.5 0 3253900 112724 None PWD CSR VOL II - 2023-24. I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 86.91 False None None False None False 89065.368 0 3253901 112724 None PWD CSR VOL II - 2023-24. I. No.8.8 P.No. Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 1000x1000 mm Sqm 1418.55 1418.55 386.21 False None None False None False 547858.1955 0 3253902 112724 None PWD CSR VOL II - 2023-24. I. No.8.8 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 389.55 389.55 225.14 False None None False None False 87703.287 0 3253903 112724 None PWD CSR VOL II - 2023-24. I. No.8.25 P.No.45 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 319.44 False None None False None False 45951.444 0 3253904 112724 None PWD CSR VOL II - 2023-24. I. No.8.28 P.No.45 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 93.45 93.45 253.58 False None None False None False 23697.051 0 3253905 112724 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 54.72 False None None False None False 9882.432 0 3253906 112724 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 25.2 False None None False None False 4551.12 0 3253907 112724 None PWD CSR VOL II - 2023-24. I. No.11.28 P.No.85 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 238.5 False None None False None False 141490.125 0 3253908 112724 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. .M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 108.2 False None None False None False 777433.23 0 3253909 112724 None PWD CSR VOL I - 2023-24. I. No.9 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 10.6 False None None False None False 53313.866 0 3253910 112724 None PWD CSR VOL I - 2023-24. I. No.14 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Lintle&Roof Beam 60% Cum 4311.09 4311.09 31.7 False None None False None False 136661.553 0 3253911 112724 None PWD CSR VOL I - 2023-24. I. No.15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Roof Slab 50% Cum 3592.58 3592.58 49.73 False None None False None False 178659.0034 0 3253912 112724 None PWD CSR VOL I - 2023-24. I. No.16 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Stair case 50% Cum 3592.58 3592.58 5.9 False None None False None False 21196.222 0 3253913 112724 None PWD CSR VOL II - 2023-24. I. No.8.6.1 P.No.42 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge Sqm 339.15 339.15 400.97 False None None False None False 135988.9755 0 3253914 112724 None PWD CSR VOL II - 2023-24. I. No.12.13.1 P.No.100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 2.27 False None None False None False 235525.5525 0 3253915 112724 None PWD CSR VOL II - 2023-24. I. No.8.16.1 P.No.43 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Mtr 35.7 35.7 211.37 False None None False None False 7545.909 0 1717997961000 1 None None Buildings GROUND FLOOR TOILET 1471133.36 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253916 112725 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 32.4 False None None False None False 3470.04 0 3253917 112725 None PWD DSR 2023-24 V -1 P.NO-06 I.NO-1.5.2 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 17.87 False None None False None False 8349.7575 0 3253918 112725 None PWD DSR 2023-24 V -1 P.NO-7 I.NO-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 279.3 279.3 8.1 False None None False None False 2262.33 0 3253919 112725 None PWD CSR VOL I 2023-24. I. No. 2.1.2 P.No. 15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 14.78 False None None False None False 87899.616 0 3253920 112725 None PWD CSR VOL I 2023-24. I. No. 2.1.2 P.No. 15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 1.17 False None None False None False 6958.224 0 3253921 112725 None PWD CSR VOL 2 2023-24. Sl. No. 5.2 , P.No. 09 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 6948.9 6948.9 6.62 False None None False None False 46001.718 0 3253922 112725 None PWD CSR VOL 2 2023-24. Sl. No. 5.3 , P.No. 09 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6515.25 6515.25 5.07 False None None False None False 33032.3175 0 3253923 112725 None PWD CSR VOL I 2021-22. I. No. 1.8 P.No. 7 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 472.82 472.82 68.58 False None None False None False 32425.9956 0 3253924 112725 None PWD SR- VOL I - 2023-24. I. No. 2.2.3 P.No. 15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" Cum 6652.8 6652.8 2.4 False None None False None False 15966.72 0 3253925 112725 None PWD SR VOL I 2023-24. I. No. 3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Footing 5% Cum 506.88 506.88 2.4 False None None False None False 1216.512 0 3253926 112725 None PWD SR VOL I 2023-24. I. No. 2.2.3 P.No. 15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 0.63 False None None False None False 4191.264 0 3253927 112725 None PWD SR VOL I 2023-24. I. No. 3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 4656.96 4656.96 0.63 False None None False None False 2933.8848 0 3253928 112725 None PWD SR VOL I 2023-24. I. No. 2.4.3 P.No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 4.3 False None None False None False 28607.04 0 3253929 112725 None PWD SR VOL I 2023-24. I. No.3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Grade & Plinth Beam 50% Cum 3326.4 3326.4 4.3 False None None False None False 14303.52 0 3253930 112725 None PWD SR for Buildings VOL I for the year 2023-24. I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 3.01 False None None False None False 21627.3015 0 3253931 112725 None PWD SR VOL I 2023-24. I. No.3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 3.01 False None None False None False 15139.1261 0 3253932 112725 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 1.98 False None None False None False 14226.597 0 3253933 112725 None PWD SR VOL I 2023-24. I. No.14 P.No.112 Appendix I Additionalities for Formwork, Centering & Scaffolding for Lintel Beam 60% Cum 4311.09 4311.09 1.98 False None None False None False 8535.9582 0 3253934 112725 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 2.36 False None None False None False 16956.954 0 3253935 112725 None PWD SR VOL I 2023-24. I. No.14 P.No.112 Appendix I Additionalities for Formwork, Centering & Scaffolding for Roof Beam 20% Cum 4311.09 4311.09 2.36 False None None False None False 10174.1724 0 3253936 112725 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 7.69 False None None False None False 55253.8035 0 3253937 112725 None PWD SR for Buildings VOL I for the year 2023-24. I Appendix I Additionalities for Formwork, Centering & Scaffolding for Roof Slab 50% Cum 3592.58 3592.58 7.69 False None None False None False 27626.9402 0 3253938 112725 None PWD SR VOL II 2023-24. I. No.6.13 P.No. 14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 1024.8 1024.8 13.23 False None None False None False 13558.104 0 3253939 112725 None PWD SR VOL II 2023-24. I. No.6.13 P.No. 14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 119.66 False None None False None False 122627.568 0 3253940 112725 None PWD SR VOL II 2023-24. I. No.6.16 P.No. 15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 99.75 99.75 119.66 False None None False None False 11936.085 0 3253941 112725 None PWD SR VOL II 2023-24. I. No.8.6.1 P.No. 42 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 339.15 339.15 196.77 False None None False None False 66734.5455 0 3253942 112725 None PWD SR VOL II 2023-24. I. No.8.9 P.No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 107.68 False None None False None False 43529.64 0 3253943 112725 None PWD SR VOL II 2023-24. I. No.8.7 P.No. 42 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 384.3 384.3 138.56 False None None False None False 53248.608 0 3253944 112725 None PWD SR VOL II 2023-24. I. No.8.51 P.No. 50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 244.7 False None None False None False 25693.5 0 3253945 112725 None PWD SR VOL II 2023-24. I. No.12.13.1 P.No. 100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.15 False None None False None False 15563.3625 0 3253946 112725 None PWD SR VOL II 2023-24. I. No.12.54.1 P.No. 104 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 333.9 333.9 91.2 False None None False None False 30451.68 0 3253947 112725 None PWD SR VOL II 2023-24. I. No.12.57.6 P.No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per specification. 35 mm thick both side commercial Sqm 3488.1 3488.1 3.49 False None None False None False 12173.469 0 3253948 112725 None PWD SR VOL II 2023-24. I. No.12.55.1 P.No. 104 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam Nos 2484.3 2484.3 25.2 False None None False None False 62604.36 0 3253949 112725 None PWD SR VOL II 2023-24. I. No.12.51 P.No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1066.8 1066.8 2.0 False None None False None False 2133.6 0 3253950 112725 None PWD SR VOL II 2023-24. I. No.12.85 P.No. 109 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 6004.95 6004.95 6.84 False None None False None False 41073.858 0 3253951 112725 None PWD SR VOL II 2023-24. I. No.12.34A P.No. 86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 176.4 176.4 143.64 False None None False None False 25338.096 0 3253952 112725 None PWD SR VOL II 2023-24. I. No.9.11A P.No.60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 47.93 False None None False None False 44740.2585 0 3253953 112725 None PWD SR VOL II 2023-24. I. No. 9.39 P.No. 65 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 136.08 False None None False None False 207038.916 0 3253954 112725 None PWD SR VOL II 2023-24. I. No. 8.33.3 P.No. 47 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.95 145.95 6.84 False None None False None False 998.298 0 3253955 112725 None PWD SR VOL II 2023-24. I. No. 8.33.1 P.No. 46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.9 165.9 196.77 False None None False None False 32644.143 0 3253956 112725 None PWD SR VOL II 2023-24. I. No. 8.33.1 P.No. 46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.9 165.9 47.93 False None None False None False 7951.587 0 3253957 112725 None PWD SR VOL II 2023-24. I. No. 8.30 P.No. 46 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 107.68 False None None False None False 19673.136 0 3253958 112725 None PWD CSR VOL II 2023-24. I. No. 8.19.1 P.No. 44 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 20.4 False None None False None False 5462.1 0 3253959 112725 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 1.73 False None None False None False 162498.6405 0 3253960 112725 None PWD CSR VOL II 2023-24. I. No. 8.49 P.No. 49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. cm 4.2 4.2 1500.0 False None None False None False 6300.0 0 1717997961000 1 None None Buildings ELECTRICAL FOR TOILET 93145.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253961 112726 None PWD Ele. SR 2023-24, P. No-02, It No- 1.2.1 Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary Mtr 69.3 69.3 120.0 False None None False None False 8316.0 0 3253962 112726 None PWD Ele. SR 2023-24, P. No-01, It No- 1.2.2 25mm dia 2mm thick Mtr 81.9 81.9 90.0 False None None False None False 7371.0 0 3253963 112726 None PWD Ele. SR 2023-24, P.No-01,It No- 1.3.1 Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 40.0 False None None False None False 2856.0 0 3253964 112726 None PWD Ele.SR 2023-24, P.No-01, It No- 1.3.2 25mm dia 2mm thick Mtr 84.0 84.0 80.0 False None None False None False 6720.0 0 3253965 112726 None PWD Ele. SR 2022-23, P.No-03, It No- 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 263.55 263.55 12.0 False None None False None False 3162.6 0 3253966 112726 None PWD Ele. SR 2022-23, P.No-03, It No- 2.2.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 379.05 379.05 20.0 False None None False None False 7581.0 0 3253967 112726 None PWD Ele. SR 2022-23, P. No-03, It No- 2.2.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 569.1 569.1 20.0 False None None False None False 11382.0 0 3253968 112726 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 1.5sqmm. Mtr 27.3 27.3 250.0 False None None False None False 6825.0 0 3253969 112726 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.3 2.5sqmm. Mtr 42.0 42.0 250.0 False None None False None False 10500.0 0 3253970 112726 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.4 4.0sqmm. Mtr 61.95 61.95 100.0 False None None False None False 6195.0 0 3253971 112726 None PWD Ele. SR 2022-23, P.No-6, It No- 3.14.6 6Amps lamp holder No 66.15 66.15 12.0 False None None False None False 793.8 0 3253972 112726 None PWD Ele. SR 2022-23, P.No-5, It No- 3.1.1 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 2 Way Each 127.05 127.05 10.0 False None None False None False 1270.5 0 3253973 112726 None PWD Ele. SR 2022-23, P.No-5, It No- 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way switch. Each 92.4 92.4 10.0 False None None False None False 924.0 0 3253974 112726 None PWD Ele. SR 2022-23, P.No-5, It No- 3.6.8 16Amps one way switch. Each 261.45 261.45 10.0 False None None False None False 2614.5 0 3253975 112726 None PWD Ele. SR 2022-23, P. No-5, It No- 3.6.11 6/16Amps universal socket. Each 261.45 261.45 1.0 False None None False None False 261.45 0 3253976 112726 None PWD Ele. SR 2022-23, P.No-5, It No- 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . 4-5Way Each 144.9 144.9 4.0 False None None False None False 579.6 0 3253977 112726 None PWD Ele. SR 2022-23, P. No-5, It No- 3.4.4 8Way Each 262.5 262.5 1.0 False None None False None False 262.5 0 3253978 112726 None PWD Ele. SR 2022-23, P. No-5, It No- 3.4.5 10-12Way Each 341.25 341.25 1.0 False None None False None False 341.25 0 3253979 112726 None PWD Ele. SR 2022-23, P. No-5, It No- 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4 Module Each 183.75 183.75 4.0 False None None False None False 735.0 0 3253980 112726 None PWD Ele. SR 2022-23, P.No-5, It No- 3.5.4 8Module Each 317.1 317.1 2.0 False None None False None False 634.2 0 3253981 112726 None PWD Ele. SR 2022-23, P. No-5, It No- 3.5.5 10-12Module Each 381.15 381.15 2.0 False None None False None False 762.3 0 3253982 112726 None PWD Ele. SR 2022-23, P. No-38 , It No- 11.13.2 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. Each 255.15 255.15 8.0 False None None False None False 2041.2 0 3253983 112726 None PWD Ele. SR 2022-23, P. No-39 , It No- 12.12.1 Supplying and fixing/replacing of fluorescent tube. 18 to 40W Each 96.6 96.6 8.0 False None None False None False 772.8 0 3253984 112726 None PWD Ele.SR 2022-23, P. No-13, It No- 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 549.15 549.15 6.0 False None None False None False 3294.9 0 3253985 112726 None PWD Ele.SR 2022-23, P. No-13, It No- 5.17.4 6-32 Amps DP Each 1158.15 1158.15 6.0 False None None False None False 6948.9 0 1717997961000 1 None None Buildings FIRST FLOOR SCHOOL BUILDING 1741770.16 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3253986 112727 None PWD CSR VOL I - 2023-24. I. No.2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 36.23 False None None False None False 260317.9845 0 3253987 112727 None PWD CSR VOL I - 2023-24. I. No. 9 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 4.55 False None None False None False 22884.7255 0 3253988 112727 None PWD CSR VOL I - 2023-24. I. No. 14 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Lintel&Roof beam 60% Cum 4311.09 4311.09 11.53 False None None False None False 49706.8677 0 3253989 112727 None PWD CSR VOL I - 2023-24. I. No. 15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Slab 50% Cum 3592.58 3592.58 17.0 False None None False None False 61073.86 0 3253990 112727 None PWD CSR VOL I - 2023-24. I. No. 16 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Stair case 50% Cum 3592.58 3592.58 3.14 False None None False None False 11280.7012 0 3253991 112727 None PWD CSR VOL I - 2023-24. I. No. 2.4.1 P.No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, cluding all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 6724.2 6724.2 1.07 False None None False None False 7194.894 0 3253992 112727 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No.16 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregateS Cum 7185.15 7185.15 0.56 False None None False None False 4023.684 0 3253993 112727 None PWD SR 2023-24 V-1 Page No .112 SI No 19 Addendum I Percentage Additionalities for Formwork, Centering & Scaffoldin Above the Item for Chejja45% Cum 3233.32 3233.32 0.56 False None None False None False 1810.6592 0 3253994 112727 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 2.31 False None None False None False 216977.9535 0 3253995 112727 None PWD CSR VOL II - 2023-24. I. No.6.5 P.No.13 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 11525.85 11525.85 38.21 False None None False None False 440402.7285 0 3253996 112727 None PWD CSR VOL II - 2023-24. I. No.11.10.1 P.No.79 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 46.2 46.2 464.4 False None None False None False 21455.28 0 3253997 112727 None PWD CSR VOL II - 2023-24. I. No.11.37.1 P.No.89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 1037.4 1037.4 15.48 False None None False None False 16058.952 0 3253998 112727 None PWD CSR VOL II - 2023-24. I. No.12.13.1 P.No.100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.32 False None None False None False 33201.84 0 3253999 112727 None PWD CSR VOL II - 2023-24. I. No.12.15 P.No.100 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Sqm 6904.8 6904.8 5.04 False None None False None False 34800.192 0 3254000 112727 None PWD CSR VOL II - 2023-24. I. No.7.6 P.No.21 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) Rmtr 677.25 677.25 21.0 False None None False None False 14222.25 0 3254001 112727 None PWD CSR VOL II - 2023-24. I. No.7.25.1 PProviding and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete 6 mm thick Cement fiber board as per IS: 14862 Sqm 666.75 666.75 10.0 False None None False None False 6667.5 0 3254002 112727 None PWD CSR VOL II - 2023-24. I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1024.8 1024.8 37.58 False None None False None False 38511.984 0 3254003 112727 None PWD CSR VOL II - 2023-24. I. No.9.21.3 P.No.14 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 1000x1000 mm Sqm 1418.55 1418.55 130.08 False None None False None False 184524.984 0 3254004 112727 None PWD CSR VOL II - 2023-24. I. No.8.9 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 202.52 False None None False None False 81868.71 0 3254005 112727 None PWD CSR VOL II - 2023-24. I. No.8.6.1 P.No.42 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge. Sqm 339.15 339.15 98.66 False None None False None False 33460.539 0 3254006 112727 None PWD CSR VOL II - 2023-24. I. No.8.25 P.No.45 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 98.66 False None None False None False 14192.241 0 3254007 112727 None PWD CSR VOL II - 2023-24. I. No.8.28 P.No.45 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 93.45 93.45 155.62 False None None False None False 14542.689 0 3254008 112727 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 15.48 False None None False None False 2795.688 0 3254009 112727 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 5.04 False None None False None False 910.224 0 3254010 112727 None PWD CSR VOL II - 2023-24. I. No.11.28 P.No.85 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 207.0 False None None False None False 122802.75 0 3254011 112727 None PWD Ele- SR 2023-24, P. No-01, It No- 1.2.1 Electrical Item Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick. Mtr 69.3 69.3 25.0 False None None False None False 1732.5 0 3254012 112727 None PWD Ele-SR 2023-24, P. No-01, It No- 1.3.1 Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 40.0 False None None False None False 2856.0 0 3254013 112727 None PWD Ele- SR 2023-24, P. No-03, It No- 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 263.55 263.55 12.0 False None None False None False 3162.6 0 3254014 112727 None PWD Ele-SR 2023-24, P.No-22, It No- 6.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. - 48" Sweep (1200mm) Regular model Each 3182.55 3182.55 4.0 False None None False None False 12730.2 0 3254015 112727 None PWD Ele-SR 2023-24, P.No-22, It No- 2.1.5 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - SThree outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches Point 1086.75 1086.75 20.0 False None None False None False 21735.0 0 3254016 112727 None PWD Ele-SR 2023-24, P.No-22, It No- 1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - 180x90x65mm Each 169.05 169.05 10.0 False None None False None False 1690.5 0 3254017 112727 None PWD Ele-SR 2023-24, P.No-3, It No- 1.6.1 Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. - 12"x12"x3" (300x300x76mm) Each 126.0 126.0 8.0 False None None False None False 1008.0 0 3254018 112727 None PWD Ele-SR 2023-24, P.No-22, It No- 11.13.1 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 769 1 x 4' Tube light fitting. Each 194.25 194.25 6.0 False None None False None False 1165.5 0 1717997961000 1 None None Buildings GROUND FLOOR SCHOOL ELECTRICAL 393321.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254019 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Mtr 69.3 69.3 500.0 False None None False None False 34650.0 0 3254020 112728 None UNI CSR 2023-24 PWDV ol-6 Elec Uti Part-III It No 25mm dia 2mm thick Mtr 81.9 81.9 50.0 False None None False None False 4095.0 0 3254021 112728 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 100.0 False None None False None False 7140.0 0 3254022 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 82.95 82.95 20.0 False None None False None False 1659.0 0 3254023 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying And Fixing Metal Fan Box with Round Hook. Each 122.85 122.85 26.0 False None None False None False 3194.1 0 3254024 112728 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. GROUP A - Short point upto 3Mtr from tapping point to out let via switch box Point 282.45 282.45 26.0 False None None False None False 7343.7 0 3254025 112728 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 397.95 397.95 31.0 False None None False None False 12336.45 0 3254026 112728 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 582.75 582.75 6.0 False None None False None False 3496.5 0 3254027 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt N Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 - 1.5sqmm. Mtr 27.3 27.3 1000.0 False None None False None False 27300.0 0 3254028 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt No 2.5sqmm. Mtr 44.1 44.1 1000.0 False None None False None False 44100.0 0 3254029 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 4.0sqmm. Mtr 66.15 66.15 75.0 False None None False None False 4961.25 0 3254030 112728 None UNI CSR 2023-24 PWDVol-6 Elec Uti Part-III It No Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 2 Way Each 134.4 134.4 4.0 False None None False None False 537.6 0 3254031 112728 None UNI CSR 2023-24PWD Vol-6 Elec Uti Part-III It No Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way Each 143.85 143.85 10.0 False None None False None False 1438.5 0 3254032 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 8 - Way Each 229.95 229.95 8.0 False None None False None False 1839.6 0 3254033 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 10-12 Way Each 274.05 274.05 10.0 False None None False None False 2740.5 0 3254034 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt No Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4-5 Module Each 183.75 183.75 10.0 False None None False None False 1837.5 0 3254035 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti -III It No 8 - Module Each 298.2 298.2 8.0 False None None False None False 2385.6 0 3254036 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 10-12 Module Each 361.2 361.2 10.0 False None None False None False 3612.0 0 3254037 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps One way switch. Each 107.1 107.1 80.0 False None None False None False 8568.0 0 3254038 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Stepped Fan Regulator Two Module Each 374.85 374.85 26.0 False None None False None False 9746.1 0 3254039 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 16 A One Way Switch Each 189.0 189.0 4.0 False None None False None False 756.0 0 3254040 112728 None UNI CSR 2023-24 PWD Vol-6 Ele Uti Part-III It No 6 16 A Universal Socket Each 247.8 247.8 16.0 False None None False None False 3964.8 0 3254041 112728 None UNI CSR2023-24 PWD-6 Elec Uti Part-III It No TV / Telephone Socket Each 163.8 163.8 2.0 False None None False None False 327.6 0 3254042 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No RJ 45/I.O Outlet Cat-6 Each 353.85 353.85 12.0 False None None False None False 4246.2 0 3254043 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. - 63Amps Each 2427.6 2427.6 1.0 False None None False None False 2427.6 0 3254044 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828. - 12-Way Each 16305.45 16305.45 1.0 False None None False None False 16305.45 0 3254045 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 6-32Amps SP Each 435.75 435.75 4.0 False None None False None False 1743.0 0 3254046 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 5-32 Amps DP Each 775.95 775.95 2.0 False None None False None False 1551.9 0 3254047 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door -12 Way SP &N Each 1956.15 1956.15 1.0 False None None False None False 1956.15 0 3254048 112728 None UNI CSR 2023-24nPWD Vol-6 Elec Uti Part-III It No Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. - 63 Amps 4 pole Each 3210.9 3210.9 1.0 False None None False None False 3210.9 0 3254049 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. - 14SWG Each 0.53 0.53 4000.0 False None None False None False 2120.0 0 3254050 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. - 300mmx300mmx214mm Each 4737.6 4737.6 1.0 False None None False None False 4737.6 0 3254051 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. Each 3133.2 3133.2 26.0 False None None False None False 81463.2 0 3254052 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. - 2Pair Mtr 22.05 22.05 200.0 False None None False None False 4410.0 0 3254053 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & fixing of I/O socket with back box - Double I/o Each 577.5 577.5 12.0 False None None False None False 6930.0 0 3254054 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & Fixing of …mtrs Cat6 Patch Cable - 2mtr Each 269.85 269.85 12.0 False None None False None False 3238.2 0 3254055 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & Fixing of Patch panel for LAN cabling - 16 Port 10/100 patch panel Each 3202.5 3202.5 1.0 False None None False None False 3202.5 0 3254056 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing of MDF krone junction box with KRONE Module / Telephone - cable termination. - 10 Pair m 362.25 362.25 6.0 False None None False None False 2173.5 0 3254057 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. -LED light fighting 1 x4- 20 22 w Each 724.5 724.5 33.0 False None None False None False 23908.5 0 3254058 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Streetlight 40watts Each 4225.2 4225.2 1.0 False None None False None False 4225.2 0 3254059 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall / ceiling / Rafter / Girders Each 128.1 128.1 33.0 False None None False None False 4227.3 0 3254060 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 170.1 170.1 1.0 False None None False None False 170.1 0 3254061 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 26.0 False None None False None False 4668.3 0 3254062 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Km 92838.9 92838.9 0.08 False None None False None False 7427.112 0 3254063 112728 None UNI CSR 2023-24 Escoms Vol-6 Distribution Material Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 2 core 6 sqmm Km 66576.3 66576.3 0.02 False None None False None False 1331.526 0 3254064 112728 None UNI CSR 2023-24 Escoms Vol-6 Distribution Labour P Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. 2.5 sqmm to 25 sqmm Km 1246.35 1246.35 0.1 False None None False None False 124.635 0 3254065 112728 None UNI CSR2021-22 Bescoms Vol-6 Distribution Labour Earth work Excavation for cable trench of 0.5m to 0.75 mtr width and Depth upto 1 Mtrs including trial pits, depositing on bank upto a lead of 50 Mtrs , Supplying and Displaying necessary Danger Boards and Lighting , Using sight Rails and Sign Boards at every 100 Mtrs wherever necessary as directed. In soil (Ordinary) (1x60x0.50x0.75 = 22.50 CMT) cm 273.0 273.0 22.5 False None None False None False 6142.5 0 3254066 112728 None UNI CSR 2021-22 Bescoms Vol-6 Distribution Labour Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. (1x60x0.50x0.75 = 22.50 CMT) cm 60.9 60.9 22.5 False None None False None False 1370.25 0 3254067 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 4609.5 4609.5 1.0 False None None False None False 4609.5 0 3254068 112728 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Each 3685.5 3685.5 2.0 False None None False None False 7371.0 0 1717999503000 0 None None Buildings Construction Of New School Building in UGHPS Goudanabhavi Village in Maski taluk of Raichur district. Under - KARNATAKA SAMAGRA SHIKSHANA SCHEME/2022-23 11375226.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3254652 112747 None PWD CSR VOL I - 2023-24. I. No.2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 36.23 False None None False None False 260317.9845 0 3254545 112747 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth Cum 99.75 99.75 240.0 False None None False None False 23940.0 0 3254582 112747 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 32.4 False None None False None False 3470.04 0 3254627 112747 None PWD Ele. SR 2023-24, P. No-02, It No- 1.2.1 Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary Mtr 69.3 69.3 120.0 False None None False None False 8316.0 0 3254527 112747 None PWD SR VOL I 2023-24 I.No.1.5.2 P.No.6 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavatedsurface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, Cum 467.25 467.25 1.88 False None None False None False 878.43 0 3254502 112747 None PWD SR VOL II 2023-24. I. No. 13.34 P.NO.123 WATER SUPPLY WORKS P/F STORAGE TANK Providing and placing on terrace (on all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 3254685 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Mtr 69.3 69.3 500.0 False None None False None False 34650.0 0 3254532 112747 None WS & UGD Vol V CSR-2023-24 No.13.11.3 P No-151 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP Each 27205.5 27205.5 1.0 False None None False None False 27205.5 0 3254653 112747 None PWD CSR VOL I - 2023-24. I. No. 9 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 4.55 False None None False None False 22884.7255 0 3254583 112747 None PWD DSR 2023-24 V -1 P.NO-06 I.NO-1.5.2 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 17.87 False None None False None False 8349.7575 0 3254546 112747 None PWD DSR 2023-24 V -1 P.NO-08 I.NO-1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m Cum 107.1 107.1 376.88 False None None False None False 40363.848 0 3254628 112747 None PWD Ele. SR 2023-24, P. No-01, It No- 1.2.2 25mm dia 2mm thick Mtr 81.9 81.9 90.0 False None None False None False 7371.0 0 3254528 112747 None PWD SR VOL I 2023-24 I.No.1.12 P.No.6 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 99.75 99.75 56.25 False None None False None False 5610.9375 0 3254503 112747 None PWD SR VOL II 2023-24. I. No. 13.34 P.NO.123 P/F STORAGE TANK Providing and placing on terrace (on all floor levels), polyethylene water storage tanks IS: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 3254686 112747 None UNI CSR 2023-24 PWDV ol-6 Elec Uti Part-III It No 25mm dia 2mm thick Mtr 81.9 81.9 50.0 False None None False None False 4095.0 0 3254533 112747 None WS & UGD -Vol V CSR - 2023-24 i. No. 13.22.3 ,P Submersible Cables: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (1X3X4 m2) Mtr 141.75 141.75 90.0 False None None False None False 12757.5 0 3254654 112747 None PWD CSR VOL I - 2023-24. I. No. 14 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Lintel&Roof beam 60% Cum 4311.09 4311.09 11.53 False None None False None False 49706.8677 0 3254547 112747 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 63.21 False None None False None False 375922.512 0 3254584 112747 None PWD DSR 2023-24 V -1 P.NO-7 I.NO-1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 279.3 279.3 8.1 False None None False None False 2262.33 0 3254629 112747 None PWD Ele. SR 2023-24, P.No-01,It No- 1.3.1 Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 40.0 False None None False None False 2856.0 0 3254529 112747 None PWD SR VOL I 2023-24 I.No.2.1.2 P.No.15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Cum 5947.2 5947.2 1.25 False None None False None False 7434.0 0 3254504 112747 None PWD SR VOL II 2023-24. I. No. 13.33.5 P.NO.123 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). Mtr 500.85 500.85 15.0 False None None False None False 7512.75 0 3254687 112747 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 100.0 False None None False None False 7140.0 0 3254534 112747 None WS & UGD -Vol V CSR -2023-24 I.No. 13.23.1 ,P N Pressure Guage: Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. a.63mm Each 436.8 436.8 1.0 False None None False None False 436.8 0 3254655 112747 None PWD CSR VOL I - 2023-24. I. No. 15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Slab 50% Cum 3592.58 3592.58 17.0 False None None False None False 61073.86 0 3254585 112747 None PWD CSR VOL I 2023-24. I. No. 2.1.2 P.No. 15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 14.78 False None None False None False 87899.616 0 3254548 112747 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite /trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 26.78 False None None False None False 178161.984 0 3254530 112747 None PWD DSR 2023-24 vol-1 I.No.2.2.3 P No.15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 7.55 False None None False None False 50228.64 0 3254630 112747 None PWD Ele.SR 2023-24, P.No-01, It No- 1.3.2 25mm dia 2mm thick Mtr 84.0 84.0 80.0 False None None False None False 6720.0 0 3254505 112747 None PWD SR VOL II 2023-24. I. No. 13.33.4 P.NO.122 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete. (external work). - 32mm nominal doa pipes m 390.6 390.6 15.0 False None None False None False 5859.0 0 3254688 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 82.95 82.95 20.0 False None None False None False 1659.0 0 3254535 112747 None WS & UGD -Vol V - 2023-24 No. 27.1 ,P No-162 Gate Valve: Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments size 50mm Each 1312.5 1312.5 1.0 False None None False None False 1312.5 0 3254656 112747 None PWD CSR VOL I - 2023-24. I. No. 16 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Stair case 50% Cum 3592.58 3592.58 3.14 False None None False None False 11280.7012 0 3254549 112747 None PWD CSR VOL I - 2023-24. I. No.2 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Footing 8% Cum 532.22 532.22 28.44 False None None False None False 15136.3368 0 3254586 112747 None PWD CSR VOL I 2023-24. I. No. 2.1.2 P.No. 15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 1.17 False None None False None False 6958.224 0 3254631 112747 None PWD Ele. SR 2022-23, P.No-03, It No- 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 263.55 263.55 12.0 False None None False None False 3162.6 0 3254531 112747 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.38 False None None False None False 35693.343 0 3254506 112747 None PWD SR VOL II 2023-24. I. No. 13.32.3 P.NO.122 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step solvent cement & the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25mm nominal dia pipes m 500.85 500.85 15.0 False None None False None False 7512.75 0 3254689 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying And Fixing Metal Fan Box with Round Hook. Each 122.85 122.85 26.0 False None None False None False 3194.1 0 3254536 112747 None WS & UGD -Vol V - 2023-24 No. 13.43.1 P No-157 Outdoor type Board: upto 6 HP Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter Each 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3254587 112747 None PWD CSR VOL 2 2023-24. Sl. No. 5.2 , P.No. 09 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 6948.9 6948.9 6.62 False None None False None False 46001.718 0 3254657 112747 None PWD CSR VOL I - 2023-24. I. No. 2.4.1 P.No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, cluding all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum 6724.2 6724.2 1.07 False None None False None False 7194.894 0 3254550 112747 None PWD DSR 2023-24 V -1 P.NO-15 I.NO-2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The nite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, ding all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 23.16 False None None False None False 154078.848 0 3254632 112747 None PWD Ele. SR 2022-23, P.No-03, It No- 2.2.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 379.05 379.05 20.0 False None None False None False 7581.0 0 3254507 112747 None PWD SR VOL II 2023-24. I. No. 13.32.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, i/c including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step solvent cement & the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20mm nominal dia pipes m 397.95 397.95 15.0 False None None False None False 5969.25 0 3254690 112747 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. GROUP A - Short point upto 3Mtr from tapping point to out let via switch box Point 282.45 282.45 26.0 False None None False None False 7343.7 0 3254537 112747 None WS & UGD -Vol V - 2023-24 No. 13.25 ,P No-162 Power capacitor Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 3.0 False None None False None False 1732.5 0 3254588 112747 None PWD CSR VOL 2 2023-24. Sl. No. 5.3 , P.No. 09 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6515.25 6515.25 5.07 False None None False None False 33032.3175 0 3254658 112747 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No.16 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregateS Cum 7185.15 7185.15 0.56 False None None False None False 4023.684 0 3254551 112747 None PWD CSR VOL I - 2023-24. I. No.2 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Plinth Beam 50% Cum 3326.4 3326.4 23.17 False None None False None False 77072.688 0 3254633 112747 None PWD Ele. SR 2022-23, P. No-03, It No- 2.2.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 569.1 569.1 20.0 False None None False None False 11382.0 0 3254508 112747 None PWD SR VOL II 2023-24. I. No. 13.2.1 P.NO.117 P/F BRASS BIBCOCK Nos 300.3 300.3 15.0 False None None False None False 4504.5 0 3254691 112747 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box Point 397.95 397.95 31.0 False None None False None False 12336.45 0 3254538 112747 None WS & UGD -Vol V CSR-2023-24 I. No. 32 ,P No-162 MCB Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3254552 112747 None PWD CSR VOL I - 2023-24. I. No. 1.11 P.No. 7 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 454.65 454.65 416.67 False None None False None False 189439.0155 0 3254589 112747 None PWD CSR VOL I 2021-22. I. No. 1.8 P.No. 7 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 472.82 472.82 68.58 False None None False None False 32425.9956 0 3254634 112747 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 1.5sqmm. Mtr 27.3 27.3 250.0 False None None False None False 6825.0 0 3254659 112747 None PWD SR 2023-24 V-1 Page No .112 SI No 19 Addendum I Percentage Additionalities for Formwork, Centering & Scaffoldin Above the Item for Chejja45% Cum 3233.32 3233.32 0.56 False None None False None False 1810.6592 0 3254509 112747 None PWD SR VOL II 2023-24. I. No. 13.5.2 P/F BRASS BALL VALVE Nos 329.7 329.7 10.0 False None None False None False 3297.0 0 3254692 112747 None UNI CSR 2023-24 PWD Vol-6 Elec UtiPart-IIIIt No Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box Point 582.75 582.75 6.0 False None None False None False 3496.5 0 3254539 112747 None WS & UGD -Vol V CSR -2023-24 No. 13.32 HDPE Pipe: Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : PE80 (PN 6.0 / 6 Kg/cm2) a. 63mm Mtr 198.45 198.45 65.0 False None None False None False 12899.25 0 3254553 112747 None PWD CSR VOL II - 2023-24. I. No. 4.1 P.No. 5 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 123.9 123.9 142.1 False None None False None False 17606.19 0 3254635 112747 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.3 2.5sqmm. Mtr 42.0 42.0 250.0 False None None False None False 10500.0 0 3254660 112747 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 2.31 False None None False None False 216977.9535 0 3254510 112747 None PWD SR VOL II 2023-24. I. No. 14.7.2 P/F WASH BASIN Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15mm C.P. brass pillar tap Each 2689.05 2689.05 4.0 False None None False None False 10756.2 0 3254590 112747 None PWD SR- VOL I - 2023-24. I. No. 2.2.3 P.No. 15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" Cum 6652.8 6652.8 2.4 False None None False None False 15966.72 0 3254693 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt N Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 - 1.5sqmm. Mtr 27.3 27.3 1000.0 False None None False None False 27300.0 0 3254540 112747 None WS & UGD Works Vol V CSR for the 2021-22 No. 13.32 Errection,Electrification and commisioning works of Submersible Pump sets: Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3254554 112747 None PWD CSR VOL I - 2023-24. I. No. 2.4.1P.No.16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Sqm 6724.2 6724.2 2.5 False None None False None False 16810.5 0 3254661 112747 None PWD CSR VOL II - 2023-24. I. No.6.5 P.No.13 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 11525.85 11525.85 38.21 False None None False None False 440402.7285 0 3254636 112747 None PWD Ele. SR 2022-23, P.No-03, It No- 2.3.4 4.0sqmm. Mtr 61.95 61.95 100.0 False None None False None False 6195.0 0 3254591 112747 None PWD SR VOL I 2023-24. I. No. 3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Footing 5% Cum 506.88 506.88 2.4 False None None False None False 1216.512 0 3254511 112747 None PWD SR VOL II 2023-24. I. No. 13.8.2.2 PVC connection pipe Nos 115.5 115.5 4.0 False None None False None False 462.0 0 3254694 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt No 2.5sqmm. Mtr 44.1 44.1 1000.0 False None None False None False 44100.0 0 3254541 112747 None WS & UGD -Vol V CSR -2023-24 No. 13.33 Pump sets: Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1417.5 1417.5 1.0 False None None False None False 1417.5 0 3254555 112747 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 1.01 False None None False None False 7257.0015 0 3254662 112747 None PWD CSR VOL II - 2023-24. I. No.11.10.1 P.No.79 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 46.2 46.2 464.4 False None None False None False 21455.28 0 3254637 112747 None PWD Ele. SR 2022-23, P.No-6, It No- 3.14.6 6Amps lamp holder No 66.15 66.15 12.0 False None None False None False 793.8 0 3254592 112747 None PWD SR VOL I 2023-24. I. No. 2.2.3 P.No. 15 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 0.63 False None None False None False 4191.264 0 3254512 112747 None PWD SR VOL II 2023-24. I. No. 14.3.2 Page No. 131 SANITARY WORK WATER CLOSET Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 6095.25 6095.25 16.0 False None None False None False 97524.0 0 3254695 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 4.0sqmm. Mtr 66.15 66.15 75.0 False None None False None False 4961.25 0 3254542 112747 None WS & UGD -Vol V CSR -2023-24 No. 13.38.2 Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen insulating compound complete with terminals clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. Sqm Each 472.5 472.5 1.0 False None None False None False 472.5 0 3254556 112747 None PWD CSR VOL I - 2023-24. I. No.15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for chejja 45% Cum 3233.32 3233.32 1.35 False None None False None False 4364.982 0 3254663 112747 None PWD CSR VOL II - 2023-24. I. No.11.37.1 P.No.89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 1037.4 1037.4 15.48 False None None False None False 16058.952 0 3254638 112747 None PWD Ele. SR 2022-23, P.No-5, It No- 3.1.1 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 2 Way Each 127.05 127.05 10.0 False None None False None False 1270.5 0 3254593 112747 None PWD SR VOL I 2023-24. I. No. 3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 4656.96 4656.96 0.63 False None None False None False 2933.8848 0 3254513 112747 None PWD SR VOL II 2023-24. No. 14.29 Page No. 136 GULLY TRAP Each 49.35 49.35 10.0 False None None False None False 493.5 0 3254696 112747 None UNI CSR 2023-24 PWDVol-6 Elec Uti Part-III It No Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 2 Way Each 134.4 134.4 4.0 False None None False None False 537.6 0 3254543 112747 None WS & UGD -Vol V CSR -2023-24 No. 13.27.1 Collar: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) a.50 mm Each 3202.5 3202.5 1.0 False None None False None False 3202.5 0 3254514 112747 None PWD CSR VOL I 2023-24I. No. 1.6.1 Page No.6 EARTH WORK EXCAVATION Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m Cum 508.2 508.2 46.08 False None None False None False 23417.856 0 3254664 112747 None PWD CSR VOL II - 2023-24. I. No.12.13.1 P.No.100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.32 False None None False None False 33201.84 0 3254557 112747 None PWD DSR 2021-22 V - 1 I.No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 17.79 False None None False None False 1671012.0315 0 3254639 112747 None PWD Ele. SR 2022-23, P.No-5, It No- 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way switch. Each 92.4 92.4 10.0 False None None False None False 924.0 0 3254594 112747 None PWD SR VOL I 2023-24. I. No. 2.4.3 P.No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6652.8 6652.8 4.3 False None None False None False 28607.04 0 3254697 112747 None UNI CSR 2023-24PWD Vol-6 Elec Uti Part-III It No Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way Each 143.85 143.85 10.0 False None None False None False 1438.5 0 3254544 112747 None WS & UGD -Vol V CSR- 2023-24 No.13.39 Earthing Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 3254558 112747 None PWD CSR VOL II - 2023-24. I. No. 5.2 P.No. 9 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 6948.9 6948.9 55.24 False None None False None False 383857.236 0 3254665 112747 None PWD CSR VOL II - 2023-24. I. No.12.15 P.No.100 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Sqm 6904.8 6904.8 5.04 False None None False None False 34800.192 0 3254640 112747 None PWD Ele. SR 2022-23, P.No-5, It No- 3.6.8 16Amps one way switch. Each 261.45 261.45 10.0 False None None False None False 2614.5 0 3254595 112747 None PWD SR VOL I 2023-24. I. No.3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Grade & Plinth Beam 50% Cum 3326.4 3326.4 4.3 False None None False None False 14303.52 0 3254698 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 8 - Way Each 229.95 229.95 8.0 False None None False None False 1839.6 0 3254515 112747 None WS&UGD CSR 2023-24 I.No.16.9 SOR CODE: T130B P.No. BRICK MASONRY FOR INSPECTION CHAMBER Constructing brick masonry chamber of internal dimension 600x600 mm and depth of 600 mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150 mm thick with 1:3:6, lastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75 mm thick for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Each 5726.7 5726.7 1.09 False None None False None False 6242.103 0 3254559 112747 None PWD CSR VOL II - 2023-24. I. No. 5.3 P.No. 9 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)) Cum 6515.25 6515.25 42.67 False None None False None False 278005.7175 0 3254666 112747 None PWD CSR VOL II - 2023-24. I. No.7.6 P.No.21 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) Rmtr 677.25 677.25 21.0 False None None False None False 14222.25 0 3254641 112747 None PWD Ele. SR 2022-23, P. No-5, It No- 3.6.11 6/16Amps universal socket. Each 261.45 261.45 1.0 False None None False None False 261.45 0 3254596 112747 None PWD SR for Buildings VOL I for the year 2023-24. I Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 3.01 False None None False None False 21627.3015 0 3254699 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 10-12 Way Each 274.05 274.05 10.0 False None None False None False 2740.5 0 3254516 112747 None WS &UGD CSR 2023-24. No16.1.2 P.No.184 P/F STONEWARE PIPE Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 150 mm dia. pipes m 610.05 610.05 10.0 False None None False None False 6100.5 0 3254560 112747 None PWD CSR VOL II - 2023-24. I. No. 6.5 P.No.13 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 11525.85 11525.85 86.52 False None None False None False 997216.542 0 3254667 112747 None PWD CSR VOL II - 2023-24. I. No.7.25.1 PProviding and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete 6 mm thick Cement fiber board as per IS: 14862 Sqm 666.75 666.75 10.0 False None None False None False 6667.5 0 3254642 112747 None PWD Ele. SR 2022-23, P.No-5, It No- 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . 4-5Way Each 144.9 144.9 4.0 False None None False None False 579.6 0 3254597 112747 None PWD SR VOL I 2023-24. I. No.3 P.No.111 Appendix I Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 3.01 False None None False None False 15139.1261 0 3254700 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-IIIIt No Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4-5 Module Each 183.75 183.75 10.0 False None None False None False 1837.5 0 3254517 112747 None WS &UGD CSR 2023-24. No 16.5.1 SOR CODE: T070A P.N Labour charges for laying and jointing glazed stone ware pipes of 0.6m length and of specified dia., of tested quality conforming to IS 651 of 1965 including caulking with hemp yarn, jointing with CM 1:2 and testing with water etc. complete for: (Rate to include cost of jointing materials and trasportation of pipes from store work site ) m 74.55 74.55 10.0 False None None False None False 745.5 0 3254561 112747 None PWD CSR VOL II - 2023-24. I. No.11.10.1 P.No.79 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 46.2 46.2 1350.0 False None None False None False 62370.0 0 3254668 112747 None PWD CSR VOL II - 2023-24. I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1024.8 1024.8 37.58 False None None False None False 38511.984 0 3254643 112747 None PWD Ele. SR 2022-23, P. No-5, It No- 3.4.4 8Way Each 262.5 262.5 1.0 False None None False None False 262.5 0 3254598 112747 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 1.98 False None None False None False 14226.597 0 3254701 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti -III It No 8 - Module Each 298.2 298.2 8.0 False None None False None False 2385.6 0 3254518 112747 None WS &UGD CSR 2023-24. I.No.10.1.7 P.No.113 Supplying PVC ring tight pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials)with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110 mm outer dia., 6 kg/sqcm & class 3 m 413.7 413.7 30.0 False None None False None False 12411.0 0 3254519 112747 None PWD CSR VOL I 2023-24 I. No.2.1.2 P.No.15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 2.0 False None None False None False 11894.4 0 3254562 112747 None PWD CSR VOL II - 2023-24. I. No.11.37.1 P.No.89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 1037.4 1037.4 27.0 False None None False None False 28009.8 0 3254669 112747 None PWD CSR VOL II - 2023-24. I. No.9.21.3 P.No.14 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 1000x1000 mm Sqm 1418.55 1418.55 130.08 False None None False None False 184524.984 0 3254644 112747 None PWD Ele. SR 2022-23, P. No-5, It No- 3.4.5 10-12Way Each 341.25 341.25 1.0 False None None False None False 341.25 0 3254599 112747 None PWD SR VOL I 2023-24. I. No.14 P.No.112 Appendix I Additionalities for Formwork, Centering & Scaffolding for Lintel Beam 60% Cum 4311.09 4311.09 1.98 False None None False None False 8535.9582 0 3254702 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 10-12 Module Each 361.2 361.2 10.0 False None None False None False 3612.0 0 3254563 112747 None PWD CSR VOL II - 2023-24. I. No.12.15 P.No.100 Providing and fixing in position fully panelled Matti/ Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) the Engineer-in-Charge. Sqm 6904.8 6904.8 15.12 False None None False None False 104400.576 0 3254670 112747 None PWD CSR VOL II - 2023-24. I. No.8.9 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 202.52 False None None False None False 81868.71 0 3254645 112747 None PWD Ele. SR 2022-23, P. No-5, It No- 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4 Module Each 183.75 183.75 4.0 False None None False None False 735.0 0 3254600 112747 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 2.36 False None None False None False 16956.954 0 3254520 112747 None PWD SR VOL II 2023-24 I.No. 6.8 P.No.14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 8.92 False None None False None False 74637.654 0 3254703 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps One way switch. Each 107.1 107.1 80.0 False None None False None False 8568.0 0 3254564 112747 None PWD CSR VOL II - 2023-24. I. No.7.6 P.No.21 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/m²) Rmtr 677.25 677.25 14.0 False None None False None False 9481.5 0 3254671 112747 None PWD CSR VOL II - 2023-24. I. No.8.6.1 P.No.42 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge. Sqm 339.15 339.15 98.66 False None None False None False 33460.539 0 3254646 112747 None PWD Ele. SR 2022-23, P.No-5, It No- 3.5.4 8Module Each 317.1 317.1 2.0 False None None False None False 634.2 0 3254601 112747 None PWD SR VOL I 2023-24. I. No.14 P.No.112 Appendix I Additionalities for Formwork, Centering & Scaffolding for Roof Beam 20% Cum 4311.09 4311.09 2.36 False None None False None False 10174.1724 0 3254521 112747 None PWD SR VOL II 2023-24 I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 5.4 False None None False None False 5533.92 0 3254704 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Stepped Fan Regulator Two Module Each 374.85 374.85 26.0 False None None False None False 9746.1 0 3254522 112747 None PWD CSR VOL I 2023-24, I. No. 2.3.1 P.No.16 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7966.98 7966.98 1.51 False None None False None False 12030.1398 0 3254565 112747 None PWD CSR VOL II - 2023-24. I. No.7.25.1 P.No Providing and fixing Green Board As Per Market Rate complete. Sqm 666.75 666.75 6.0 False None None False None False 4000.5 0 3254672 112747 None PWD CSR VOL II - 2023-24. I. No.8.25 P.No.45 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 98.66 False None None False None False 14192.241 0 3254647 112747 None PWD Ele. SR 2022-23, P. No-5, It No- 3.5.5 10-12Module Each 381.15 381.15 2.0 False None None False None False 762.3 0 3254602 112747 None PWD SR VOL I 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 7.69 False None None False None False 55253.8035 0 3254705 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No 16 A One Way Switch Each 189.0 189.0 4.0 False None None False None False 756.0 0 3254566 112747 None PWD CSR VOL II - 2023-24. I. No.6.13 P.No.14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 86.91 False None None False None False 89065.368 0 3254673 112747 None PWD CSR VOL II - 2023-24. I. No.8.28 P.No.45 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 93.45 93.45 155.62 False None None False None False 14542.689 0 3254648 112747 None PWD Ele. SR 2022-23, P. No-38 , It No- 11.13.2 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. Each 255.15 255.15 8.0 False None None False None False 2041.2 0 3254603 112747 None PWD SR for Buildings VOL I for the year 2023-24. I Appendix I Additionalities for Formwork, Centering & Scaffolding for Roof Slab 50% Cum 3592.58 3592.58 7.69 False None None False None False 27626.9402 0 3254523 112747 None PWD SR VOL II 2023-24, I. No. 8.8 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 486.94 486.94 36.4 False None None False None False 17724.616 0 3254706 112747 None UNI CSR 2023-24 PWD Vol-6 Ele Uti Part-III It No 6 16 A Universal Socket Each 247.8 247.8 16.0 False None None False None False 3964.8 0 3254674 112747 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 15.48 False None None False None False 2795.688 0 3254567 112747 None PWD CSR VOL II - 2023-24. I. No.8.8 P.No. Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 1000x1000 mm Sqm 1418.55 1418.55 386.21 False None None False None False 547858.1955 0 3254649 112747 None PWD Ele. SR 2022-23, P. No-39 , It No- 12.12.1 Supplying and fixing/replacing of fluorescent tube. 18 to 40W Each 96.6 96.6 8.0 False None None False None False 772.8 0 3254604 112747 None PWD SR VOL II 2023-24. I. No.6.13 P.No. 14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 1024.8 1024.8 13.23 False None None False None False 13558.104 0 3254524 112747 None PWD SR VOL II2023-24. I. No. 13.40 Providing & Fixing square - mouth S.W. guly trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I cover 180x150 mm size P type & with non-modular common burnt clay bricks of designation 3.5 & frame of 300 x 300mm size (inside) the weight of cover to be not less than4.50 kg and frame to be not less than 2.70 Kg as per standard design : Each 2820.3 2820.3 1.0 False None None False None False 2820.3 0 3254707 112747 None UNI CSR2023-24 PWD-6 Elec Uti Part-III It No TV / Telephone Socket Each 163.8 163.8 2.0 False None None False None False 327.6 0 3254675 112747 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 5.04 False None None False None False 910.224 0 3254568 112747 None PWD CSR VOL II - 2023-24. I. No.8.8 P.No.42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 389.55 389.55 225.14 False None None False None False 87703.287 0 3254650 112747 None PWD Ele.SR 2022-23, P. No-13, It No- 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps SP Each 549.15 549.15 6.0 False None None False None False 3294.9 0 3254525 112747 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, achinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.1 False None None False None False 9392.985 0 3254605 112747 None PWD SR VOL II 2023-24. I. No.6.13 P.No. 14 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 119.66 False None None False None False 122627.568 0 3254708 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No RJ 45/I.O Outlet Cat-6 Each 353.85 353.85 12.0 False None None False None False 4246.2 0 3254526 112747 None PWD CSR VOL I 2023-24, I. No.6 P.No.111 Additionalities for Formwork, Centering & Scaffolding 20% of I.No. 21 Cum 1593.4 1593.4 1.51 False None None False None False 2406.034 0 3254676 112747 None PWD CSR VOL II - 2023-24. I. No.11.28 P.No.85 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 207.0 False None None False None False 122802.75 0 3254569 112747 None PWD CSR VOL II - 2023-24. I. No.8.25 P.No.45 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 319.44 False None None False None False 45951.444 0 3254651 112747 None PWD Ele.SR 2022-23, P. No-13, It No- 5.17.4 6-32 Amps DP Each 1158.15 1158.15 6.0 False None None False None False 6948.9 0 3254606 112747 None PWD SR VOL II 2023-24. I. No.6.16 P.No. 15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 99.75 99.75 119.66 False None None False None False 11936.085 0 3254709 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. - 63Amps Each 2427.6 2427.6 1.0 False None None False None False 2427.6 0 3254570 112747 None PWD CSR VOL II - 2023-24. I. No.8.28 P.No.45 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 93.45 93.45 253.58 False None None False None False 23697.051 0 3254677 112747 None PWD Ele- SR 2023-24, P. No-01, It No- 1.2.1 Electrical Item Concealed Conduit System :Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick. Mtr 69.3 69.3 25.0 False None None False None False 1732.5 0 3254607 112747 None PWD SR VOL II 2023-24. I. No.8.6.1 P.No. 42 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 339.15 339.15 196.77 False None None False None False 66734.5455 0 3254710 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828. - 12-Way Each 16305.45 16305.45 1.0 False None None False None False 16305.45 0 3254571 112747 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 54.72 False None None False None False 9882.432 0 3254678 112747 None PWD Ele-SR 2023-24, P. No-01, It No- 1.3.1 Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Mtr 71.4 71.4 40.0 False None None False None False 2856.0 0 3254608 112747 None PWD SR VOL II 2023-24. I. No.8.9 P.No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 404.25 404.25 107.68 False None None False None False 43529.64 0 3254711 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 6-32Amps SP Each 435.75 435.75 4.0 False None None False None False 1743.0 0 3254572 112747 None PWD CSR VOL II - 2023-24. I. No.8.45.1 P.No.49 Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign mattersand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 180.6 180.6 25.2 False None None False None False 4551.12 0 3254679 112747 None PWD Ele- SR 2023-24, P. No-03, It No- 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 263.55 263.55 12.0 False None None False None False 3162.6 0 3254609 112747 None PWD SR VOL II 2023-24. I. No.8.7 P.No. 42 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 384.3 384.3 138.56 False None None False None False 53248.608 0 3254712 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - 5-32 Amps DP Each 775.95 775.95 2.0 False None None False None False 1551.9 0 3254573 112747 None PWD CSR VOL II - 2023-24. I. No.11.28 P.No.85 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 238.5 False None None False None False 141490.125 0 3254680 112747 None PWD Ele-SR 2023-24, P.No-22, It No- 6.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. - 48" Sweep (1200mm) Regular model Each 3182.55 3182.55 4.0 False None None False None False 12730.2 0 3254610 112747 None PWD SR VOL II 2023-24. I. No.8.51 P.No. 50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 244.7 False None None False None False 25693.5 0 3254713 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door -12 Way SP &N Each 1956.15 1956.15 1.0 False None None False None False 1956.15 0 3254574 112747 None PWD CSR VOL I - 2023-24. I. No. 2.5.2 P.No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. .M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.15 7185.15 108.2 False None None False None False 777433.23 0 3254681 112747 None PWD Ele-SR 2023-24, P.No-22, It No- 2.1.5 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - SThree outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches Point 1086.75 1086.75 20.0 False None None False None False 21735.0 0 3254611 112747 None PWD SR VOL II 2023-24. I. No.12.13.1 P.No. 100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 0.15 False None None False None False 15563.3625 0 3254714 112747 None UNI CSR 2023-24nPWD Vol-6 Elec Uti Part-III It No Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. - 63 Amps 4 pole Each 3210.9 3210.9 1.0 False None None False None False 3210.9 0 3254575 112747 None PWD CSR VOL I - 2023-24. I. No.9 P.No. 111 Additionalities for Formwork, Centering & Scaffolding for Column 70% Cum 5029.61 5029.61 10.6 False None None False None False 53313.866 0 3254682 112747 None PWD Ele-SR 2023-24, P.No-22, It No- 1.4.4 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - 180x90x65mm Each 169.05 169.05 10.0 False None None False None False 1690.5 0 3254612 112747 None PWD SR VOL II 2023-24. I. No.12.54.1 P.No. 104 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. Sqm 333.9 333.9 91.2 False None None False None False 30451.68 0 3254715 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. - 14SWG Each 0.53 0.53 4000.0 False None None False None False 2120.0 0 3254576 112747 None PWD CSR VOL I - 2023-24. I. No.14 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Lintle&Roof Beam 60% Cum 4311.09 4311.09 31.7 False None None False None False 136661.553 0 3254683 112747 None PWD Ele-SR 2023-24, P.No-3, It No- 1.6.1 Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. - 12"x12"x3" (300x300x76mm) Each 126.0 126.0 8.0 False None None False None False 1008.0 0 3254613 112747 None PWD SR VOL II 2023-24. I. No.12.57.6 P.No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per specification. 35 mm thick both side commercial Sqm 3488.1 3488.1 3.49 False None None False None False 12173.469 0 3254716 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. - 300mmx300mmx214mm Each 4737.6 4737.6 1.0 False None None False None False 4737.6 0 3254577 112747 None PWD CSR VOL I - 2023-24. I. No.15 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Roof Slab 50% Cum 3592.58 3592.58 49.73 False None None False None False 178659.0034 0 3254684 112747 None PWD Ele-SR 2023-24, P.No-22, It No- 11.13.1 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 769 1 x 4' Tube light fitting. Each 194.25 194.25 6.0 False None None False None False 1165.5 0 3254614 112747 None PWD SR VOL II 2023-24. I. No.12.55.1 P.No. 104 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam Nos 2484.3 2484.3 25.2 False None None False None False 62604.36 0 3254717 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. Each 3133.2 3133.2 26.0 False None None False None False 81463.2 0 3254578 112747 None PWD CSR VOL I - 2023-24. I. No.16 P.No. 112 Additionalities for Formwork, Centering & Scaffolding for Stair case 50% Cum 3592.58 3592.58 5.9 False None None False None False 21196.222 0 3254615 112747 None PWD SR VOL II 2023-24. I. No.12.51 P.No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1066.8 1066.8 2.0 False None None False None False 2133.6 0 3254718 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. - 2Pair Mtr 22.05 22.05 200.0 False None None False None False 4410.0 0 3254579 112747 None PWD CSR VOL II - 2023-24. I. No.8.6.1 P.No.42 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge Sqm 339.15 339.15 400.97 False None None False None False 135988.9755 0 3254616 112747 None PWD SR VOL II 2023-24. I. No.12.85 P.No. 109 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 6004.95 6004.95 6.84 False None None False None False 41073.858 0 3254719 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & fixing of I/O socket with back box - Double I/o Each 577.5 577.5 12.0 False None None False None False 6930.0 0 3254580 112747 None PWD CSR VOL II - 2023-24. I. No.12.13.1 P.No.100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 2.27 False None None False None False 235525.5525 0 3254617 112747 None PWD SR VOL II 2023-24. I. No.12.34A P.No. 86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 176.4 176.4 143.64 False None None False None False 25338.096 0 3254720 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & Fixing of …mtrs Cat6 Patch Cable - 2mtr Each 269.85 269.85 12.0 False None None False None False 3238.2 0 3254581 112747 None PWD CSR VOL II - 2023-24. I. No.8.16.1 P.No.43 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Mtr 35.7 35.7 211.37 False None None False None False 7545.909 0 3254618 112747 None PWD SR VOL II 2023-24. I. No.9.11A P.No.60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 47.93 False None None False None False 44740.2585 0 3254721 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying & Fixing of Patch panel for LAN cabling - 16 Port 10/100 patch panel Each 3202.5 3202.5 1.0 False None None False None False 3202.5 0 3254619 112747 None PWD SR VOL II 2023-24. I. No. 9.39 P.No. 65 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 136.08 False None None False None False 207038.916 0 3254722 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing of MDF krone junction box with KRONE Module / Telephone - cable termination. - 10 Pair m 362.25 362.25 6.0 False None None False None False 2173.5 0 3254620 112747 None PWD SR VOL II 2023-24. I. No. 8.33.3 P.No. 47 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.95 145.95 6.84 False None None False None False 998.298 0 3254723 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. -LED light fighting 1 x4- 20 22 w Each 724.5 724.5 33.0 False None None False None False 23908.5 0 3254621 112747 None PWD SR VOL II 2023-24. I. No. 8.33.1 P.No. 46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.9 165.9 196.77 False None None False None False 32644.143 0 3254724 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. - LED Streetlight 40watts Each 4225.2 4225.2 1.0 False None None False None False 4225.2 0 3254622 112747 None PWD SR VOL II 2023-24. I. No. 8.33.1 P.No. 46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 165.9 165.9 47.93 False None None False None False 7951.587 0 3254725 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall / ceiling / Rafter / Girders Each 128.1 128.1 33.0 False None None False None False 4227.3 0 3254623 112747 None PWD SR VOL II 2023-24. I. No. 8.30 P.No. 46 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 107.68 False None None False None False 19673.136 0 3254726 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 170.1 170.1 1.0 False None None False None False 170.1 0 3254624 112747 None PWD CSR VOL II 2023-24. I. No. 8.19.1 P.No. 44 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 20.4 False None None False None False 5462.1 0 3254727 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 26.0 False None None False None False 4668.3 0 3254625 112747 None PWD SR VOL I 2023-24, I. No. 2.11a P.No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 1.73 False None None False None False 162498.6405 0 3254728 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Km 92838.9 92838.9 0.08 False None None False None False 7427.112 0 3254626 112747 None PWD CSR VOL II 2023-24. I. No. 8.49 P.No. 49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. cm 4.2 4.2 1500.0 False None None False None False 6300.0 0 3254729 112747 None UNI CSR 2023-24 Escoms Vol-6 Distribution Material Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 2 core 6 sqmm Km 66576.3 66576.3 0.02 False None None False None False 1331.526 0 3254730 112747 None UNI CSR 2023-24 Escoms Vol-6 Distribution Labour P Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. 2.5 sqmm to 25 sqmm Km 1246.35 1246.35 0.1 False None None False None False 124.635 0 3254731 112747 None UNI CSR2021-22 Bescoms Vol-6 Distribution Labour Earth work Excavation for cable trench of 0.5m to 0.75 mtr width and Depth upto 1 Mtrs including trial pits, depositing on bank upto a lead of 50 Mtrs , Supplying and Displaying necessary Danger Boards and Lighting , Using sight Rails and Sign Boards at every 100 Mtrs wherever necessary as directed. In soil (Ordinary) (1x60x0.50x0.75 = 22.50 CMT) cm 273.0 273.0 22.5 False None None False None False 6142.5 0 3254732 112747 None UNI CSR 2021-22 Bescoms Vol-6 Distribution Labour Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. (1x60x0.50x0.75 = 22.50 CMT) cm 60.9 60.9 22.5 False None None False None False 1370.25 0 3254733 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 4609.5 4609.5 1.0 False None None False None False 4609.5 0 3254734 112747 None UNI CSR 2023-24 PWD Vol-6 Elec Uti Part-III It No Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Each 3685.5 3685.5 2.0 False None None False None False 7371.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1717997962000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1717997962000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1717997962000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end. None 1717997962000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1717997962000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1717998030000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1717998042000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1717998055000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1717998065000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification. None 1717998081000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason. None 1717998107000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1717998119000 0 None None ELIGIBILITY Bidders are advised to note that, 18% GST will be added to the contract amount. None 1717998135000 0 None None ELIGIBILITY The Increse in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1717998155000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected. None 1717998173000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1717998217000 0 None None ELIGIBILITY The work should be completed in 09 (Nine) Months ( including monsoon). None 1717998236000 0 None None ELIGIBILITY The KPWD Code, KTTP Act/Rules ,Delegation of Powers and other Government Orders issued by the Government from time to time will apply. None 1717998252000 0 None None ELIGIBILITY All the specifications in the commercial bid format please be read as with all leads and lifts etc., complete as per specification and as directed by the engineer-in-charge. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None List of existing commitments and ongoing works None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None 3.2. To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (between 2019-20 to 2023-24) , (b) Satisfactory completion as a prime contractor for at least one similar nature of work to an extent of 50% of the cost of the work. Rs. 56.88 Lakhs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing works Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing works None None None None List of works for which tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None 3.2. To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (between 2019-20 to 2023-24) (c) Executed in any one year (for a continuous period of 12 months), the minimum quantities of work: (usually 80% of annual rate or requirement) (a) Earthwork excavation /Subgrade/Embankment : 1011.2 cum (b)Pcc:249.408 cum (c)Steel:20.184 Tonne(d)SSM/BBM:403.92 Cum(e)Flooring:451.36 Sqm(f)Plastering:1125.216Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Quantity wise work done certificate None None None None 3.2 (a) To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (between 2019-20 to 2023-25) (a) Achieved in at least two financial years a minimum financial turnover (In all classes of Civil Engineering Construction works only) (not less than 2 times the estimated annual payment under this contract) of Rs 227.50 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None 3.3 (b). Liquid assets and or availability of credit facilities of not less than Rs. 37.92 Lakhs. (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc. (usually the equivalent of the estimate cash flow for three months in peak construction period. ( NEW FORMAT ENCLOSED AS PER GOVT CIRCULAR NO.FDCAM/16/2022(K-2) DATED:-22-08-2022. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None TENDERER MUST UPLOAD ELIGIBLE PWD REGISTRATION CERTIFICATE. Others PWD REGISTRATION CERTIFICATE createdTs version createdDate modifiedDate documentName None None None None Others -- PWD REGISTRATION CERTIFICATE
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD Registration Certificate True Technical Bid Similar nature of single work done certificate True Technical Bid Quantity wise workdone certificate True Technical Bid Assesed tender capacity / Bid capacity True Technical Bid Bankers certificate / Line of credit True Technical Bid Any other relevant documents. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1718002258000 version 0 createdDate None modifiedDate None blockNumber Office of Executive Engineer PWD Raichur Division, Raichur. street None city RAICHUR state Karnataka pin 584101
tenderRecallDTO	None