createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718341375456 version 8 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3890.00 emd 233535.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-07-2024 17:30:00 tenderQueryClose 05-07-2024 17:30:00 technicalBidOpen 11-07-2024 11:00:00 publishedDate 20-06-2024 17:45:32 publishedByPost RDPR_EE_DIV_BGK publishedByUser KPE18661 - MALLANAGOUDA R BIRADAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 04-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE PRED BAGALKOTE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08354235042 mobileNumber 8660966508 tenderSupplierList None
tenderSchedule	createdTs 1718341375502 version 6 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT4611 title Construction of 10 rooms for Government upgrade high (RMSA) School at Budni P.M village, Mudhola Taluk of Bagalkote District description Construction of 10 rooms for Government upgrade high (RMSA) School at Budni P.M village, Mudhola Taluk of Bagalkote District category WORKS categoryText Works ecv 15539000.00 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 796 locationName RDPR Division Office Bagalakote provisionalAmount 15539000.0 groupOverheadTotal 2485171.72 fileNumber AEE/PRESD/MDL/School/2022-23/SE20/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718341376000 0 None None Buildings Ground Floor 8025568.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3286508 114185 None BPM 01 GROUND FLOOR Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 684.9453 False None None False None False 73357.64163 0 3286509 114185 None BPM 02 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 2816.1 2816.1 49.1478 False None None False None False 138405.11958 0 3286510 114185 None BPM 03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 35.4225 False None None False None False 210664.692 0 3286511 114185 None BPM 04 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7185.02 7185.02 68.8285 False None None False None False 494534.14907 0 3286512 114185 None BPM 05 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11309.76 11309.76 14.0013 False None None False None False 158351.342688 0 3286513 114185 None BPM 06 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer inchargeengineer incharge of work. Cum 9094.05 9094.05 32.6075 False None None False None False 296534.235375 0 3286514 114185 None BPM 07 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10206.0 10206.0 25.2557 False None None False None False 257759.6742 0 3286515 114185 None BPM 08 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 279.3 279.3 531.5463 False None None False None False 148460.88159 0 3286516 114185 None BPM 09 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 454.65 454.65 495.209 False None None False None False 225146.77185 0 3286517 114185 None BPM 10 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 32.5859 False None None False None False 212715.867315 0 3286518 114185 None BPM 11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12214.76 12214.76 14.1464 False None None False None False 172794.880864 0 3286519 114185 None BPM 12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 89.2922 False None None False None False 747148.01889 0 3286520 114185 None BPM 13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11496.24 11496.24 22.5445 False None None False None False 259176.98268 0 3286521 114185 None BPM 14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10418.47 10418.47 2.376 False None None False None False 24754.28472 0 3286522 114185 None BPM 15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10777.73 10777.73 66.5272 False None None False None False 717012.199256 0 3286523 114185 None BPM 16 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 253.05 253.05 618.995 False None None False None False 156636.68475 0 3286524 114185 None BPM 17 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 389.55 389.55 635.2729 False None None False None False 247470.558195 0 3286525 114185 None BPM 18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings Tonne 93929.85 93929.85 18.1546 False None None False None False 1705258.85481 0 3286526 114185 None BPM 19 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1622.25 1622.25 448.8243 False None None False None False 728105.220675 0 3286527 114185 None BPM 20 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 1129.8 1129.8 21.5035 False None None False None False 24294.6543 0 3286528 114185 None BPM 21 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1461.6 1461.6 57.57 False None None False None False 84144.312 0 3286529 114185 None BPM 22 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 4206.3 4206.3 8.38 False None None False None False 35248.794 0 3286530 114185 None BPM 23 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 103755.75 103755.75 1.922 False None None False None False 199418.5515 0 3286531 114185 None BPM 24 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panel of 25mm thick including cost of materials, labour, usage charges complete as per specifications. Sqm 6029.1 6029.1 17.86 False None None False None False 107679.726 0 3286532 114185 None BPM 25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 176.4 176.4 324.405 False None None False None False 57225.042 0 3286533 114185 None BPM 26 Providing and fixing in position fully panelled shutters for windows with Honne wood stiles and rails of 30mm. thick, 75mm wide in two halves with panels provided with MDF of 18mm thick including cost of materials, labour charges, usage charges complete as per specifications. Sqm 5922.0 5922.0 30.78 False None None False None False 182279.16 0 3286534 114185 None BPM 27 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges Sqm 1667.4 1667.4 5.4 False None None False None False 9003.96 0 3286535 114185 None BPM 28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 105.0 105.0 850.19 False None None False None False 89269.95 0 3286536 114185 None BPM 29 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 120.75 120.75 106.0965 False None None False None False 12811.152375 0 3286537 114185 None BPM 30 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 944.797 False None None False None False 135909.04845 0 3286538 114185 None BPM 31 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 84.0 84.0 641.5011 False None None False None False 53886.0924 0 3286539 114185 None BPM 32 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 144.9 144.9 218.7 False None None False None False 31689.63 0 3286540 114185 None BPM 33 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2628.15 2628.15 6.3 False None None False None False 16557.345 0 3286541 114185 None BPM 34 Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick Sqm 564.9 564.9 21.0 False None None False None False 11862.9 0 1718341376000 0 None None Buildings First FLoor 4644195.48 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3286542 114186 None BPM 35 FIRST FLOOR Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 12286.61 12286.61 14.1464 False None None False None False 173811.299704 0 3286543 114186 None BPM 36 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8451.12 8451.12 94.6827 False None None False None False 800174.859624 0 3286544 114186 None BPM 37 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11568.09 11568.09 22.2052 False None None False None False 256871.752068 0 3286545 114186 None BPM 38 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10490.32 10490.32 2.16 False None None False None False 22659.0912 0 3286546 114186 None BPM 39 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10849.58 10849.58 55.1812 False None None False None False 598692.843896 0 3286547 114186 None BPM 40 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 255.58 255.58 484.99 False None None False None False 123953.7442 0 3286548 114186 None BPM 41 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 393.45 393.45 549.7376 False None None False None False 216294.25872 0 3286549 114186 None BPM 42 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings Tonne 94869.15 94869.15 10.3064 False None None False None False 977759.40756 0 3286550 114186 None BPM 43 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1638.47 1638.47 400.8081 False None None False None False 656712.047607 0 3286551 114186 None BPM 44 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104793.31 104793.31 1.799 False None None False None False 188523.16469 0 3286552 114186 None BPM 45 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panel of 25mm thick including cost of materials, labour, usage charges complete as per specifications. Sqm 6089.39 6089.39 15.2 False None None False None False 92558.728 0 3286553 114186 None BPM 46 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 178.16 178.16 368.46 False None None False None False 65644.8336 0 3286554 114186 None BPM 47 Providing and fixing in position fully panelled shutters for windows with Honne wood stiles and rails of 30mm. thick, 75mm wide in two halves with panels provided with MDF of 18mm thick including cost of materials, labour charges, usage charges complete as per specifications. Sqm 5981.22 5981.22 31.185 False None None False None False 186524.3457 0 3286555 114186 None BPM 48 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.05 106.05 875.86 False None None False None False 92884.953 0 3286556 114186 None BPM 49 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 121.96 121.96 140.976 False None None False None False 17193.43296 0 3286557 114186 None BPM 50 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.29 145.29 873.6995 False None None False None False 126939.800355 0 3286558 114186 None BPM 51 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 84.84 84.84 553.9478 False None None False None False 46996.931352 0 1718341376000 0 None None Buildings Plumbing And Sanitation work 176512.46 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3286559 114187 None BPM 52 PLUMBING AND SANITATION WORK Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 5079.9 5079.9 3.0 False None None False None False 15239.7 0 3286560 114187 None BPM 53 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Each 1211.7 1211.7 4.0 False None None False None False 4846.8 0 3286561 114187 None BPM 54 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Each 2976.75 2976.75 4.0 False None None False None False 11907.0 0 3286562 114187 None BPM 55 Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :Flat back wash basin of size 550x400 mm Each 808.5 808.5 2.0 False None None False None False 1617.0 0 3286563 114187 None BPM 56 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 3286564 114187 None BPM 57 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 75mm dia., 6 kg/sqcm & class 3 Mtr 231.0 231.0 15.0 False None None False None False 3465.0 0 3286565 114187 None BPM 58 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 110mm dia., 6 kg/sqcm & class 3 Mtr 431.55 431.55 15.0 False None None False None False 6473.25 0 3286566 114187 None BPM 59 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes Mtr 254.1 254.1 20.0 False None None False None False 5082.0 0 3286567 114187 None BPM 60 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia pipes Mtr 397.95 397.95 15.0 False None None False None False 5969.25 0 3286568 114187 None BPM 61 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes Mtr 310.8 310.8 15.0 False None None False None False 4662.0 0 3286569 114187 None BPM 62 Providing and fixing C P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g No 888.3 888.3 4.0 False None None False None False 3553.2 0 3286570 114187 None BPM 63 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation No 5924.1 5924.1 1.0 False None None False None False 5924.1 0 3286571 114187 None BPM 64 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 381.15 381.15 15.0 False None None False None False 5717.25 0 3286572 114187 None BPM 65 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 1.5625 False None None False None False 9292.5 0 3286573 114187 None BPM 66 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8631.0 8631.0 4.8737 False None None False None False 42064.9047 0 3286574 114187 None BPM 67 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 339.15 339.15 37.975 False None None False None False 12879.22125 0 3286575 114187 None BPM 68 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 9958.73 9958.73 1.5625 False None None False None False 15560.515625 0 3286576 114187 None BPM 69 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings Tonne 93929.85 93929.85 0.0703 False None None False None False 6603.268455 0 3286577 114187 None BPM 70 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter Mtr 206.85 206.85 30.0 False None None False None False 6205.5 0 1718341376000 0 None None Buildings Electrification work internal & External 207552.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3286578 114188 None BPM 71 ELECTRICAL Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick (Page No 02 INo 1.2.2 ) m 78.0 78.0 150.0 False None None False None False 11700.0 0 3286579 114188 None BPM 72 Supplying heavy gauge PVC Conduit Pipe dia.mm thick with suitable size bends, metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick (Page No 02 INo 1.3.2 ) m 79.0 79.0 100.0 False None None False None False 7900.0 0 3286580 114188 None BPM 73 Supplying and fixing PVC metal conduit Deep junction box 25 mm deep Junction box (Page No 03 INo 1.5.2 ) Each 56.0 56.0 25.0 False None None False None False 1400.0 0 3286581 114188 None BPM 74 Supplying And Fixing Metal Fan Box with Round Hook.(Page No 04 INo 1.13 ) No 117.0 117.0 42.0 False None None False None False 4914.0 0 3286582 114188 None BPM 75 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2 1.5mm2 (Phase Neutral) 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch (Page No 05 INo 2.1.1 ) Point 285.0 285.0 25.0 False None None False None False 7125.0 0 3286583 114188 None BPM 76 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5mm2 (Phase Neutral) 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694 and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Medium point above 3m upto 6m from tapping point to out let via switch (Page No 05 INo 2.1.2 ) Point 394.0 394.0 25.0 False None None False None False 9850.0 0 3286584 114188 None BPM 77 Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 2x1.5mm2 (Phase Neutral) 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet gang box the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.Long point above 6m upto 10m from tapping point to out let via switch(Page No 05 INo 2.1.3 ) Point 570.0 570.0 5.0 False None None False None False 2850.0 0 3286585 114188 None BPM 78 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments.1.5 mm2(Page No 05 INo 2.3.2 ) m 26.0 26.0 100.0 False None None False None False 2600.0 0 3286586 114188 None BPM 79 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments.2.5 mm2(Page No 05 INo 2.3.3 ) m 42.0 42.0 200.0 False None None False None False 8400.0 0 3286587 114188 None BPM 80 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 mm2(Page No 05 INo 2.3.4 ) m 63.0 63.0 100.0 False None None False None False 6300.0 0 3286588 114188 None BPM 81 Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 6 mm2(Page No 05 INo 2.3.5 ) m 92.0 92.0 30.0 False None None False None False 2760.0 0 3286589 114188 None BPM 82 Supplying and mounting 2 Nos. of 2Way 6 A flush type switches either surface flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 3854(Page No 08 INo 3.2 ) Each 170.0 170.0 10.0 False None None False None False 1700.0 0 3286590 114188 None BPM 83 Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, MachineNF screws etc complete.1 3 Way(Page No 08 INo 3.3.1 ) Each 103.0 103.0 3.0 False None None False None False 309.0 0 3286591 114188 None BPM 84 Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, MachineNF screws etc complete.4-5 Way(Page No 08 INo 3.3.2 ) Each 124.0 124.0 1.0 False None None False None False 124.0 0 3286592 114188 None BPM 85 Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in BrickC.C wall, including necessary rawl plugs, MachineNF screws etccomplete.8 Way(Page No 08 INo 3.3.4 ) Each 173.0 173.0 10.0 False None None False None False 1730.0 0 3286593 114188 None BPM 86 Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick CC wall, including necessary rawl plugs, Machine NF screws etccomplete.10 12 Way(Page No 08 INo 3.3.5 ) Each 219.0 219.0 10.0 False None None False None False 2190.0 0 3286594 114188 None BPM 87 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metal PVC box.1 to 3 Module(Page No 08 INo 3.5.1 ) Each 137.0 137.0 3.0 False None None False None False 411.0 0 3286595 114188 None BPM 88 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metal PVC box4 Module (Page No 08 INo 3.5.2 ) Each 161.0 161.0 1.0 False None None False None False 161.0 0 3286596 114188 None BPM 89 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc complete on the existing metal PVC box8 Module (Page No 08 INo 3.5.4 ) Each 234.0 234.0 10.0 False None None False None False 2340.0 0 3286597 114188 None BPM 90 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metal PVC box10 12 Module (Page No 08 INo 3.5.5 ) Each 284.0 284.0 10.0 False None None False None False 2840.0 0 3286598 114188 None BPM 91 Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module (Page No 09 INo 3.6.4 ) Each 357.0 357.0 42.0 False None None False None False 14994.0 0 3286599 114188 None BPM 92 Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch(Page No 09 INo 3.6.9 ) Each 326.0 326.0 12.0 False None None False None False 3912.0 0 3286600 114188 None BPM 93 Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 12936 16A Universal Socket (Page No 09 INo 3.6.10 ) Each 236.0 236.0 10.0 False None None False None False 2360.0 0 3286601 114188 None BPM 94 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50Hz AC supply completely wired on existing box(Page No 09 INo 3.7 ) Each 646.0 646.0 1.0 False None None False None False 646.0 0 3286602 114188 None BPM 95 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc and fixing on existing wooden or metal box using N.F screws(Page No 09 INo 3.8 ) Sqm 0.41 0.41 2000.0 False None None False None False 820.0 0 3286603 114188 None BPM 96 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws. 80 90mm (Page No 09 INo 3.10.2 ) No 15.0 15.0 20.0 False None None False None False 300.0 0 3286604 114188 None BPM 97 Fixing all types and all capacities of fluorescent falseceiling spotlight CFL LED fittings indoor on the wall ceiling rafters girdersusing 23 0.0076 twin twisted PVC insulated wires required Nos of round blocks and clamps.(Page No 56 INo 13.7.1) Each 122.0 122.0 38.0 False None None False None False 4636.0 0 3286605 114188 None BPM 98 FixingaceilingWallmountingfanofallcapacitiesandalltypestotheexistingShookwithfanregulatortotheexistingboardtogetherwithsupplyingandfixing5A.ceilingrose,necessarylengthof23 0.0076 inch PVC insulated twin twisted copper wire and wiring (Page No 56 INo 13.10) Each 171.0 171.0 18.0 False None None False None False 3078.0 0 3286606 114188 None BPM 99 Supplying,fixing,wiring,earth electrode for grounding conduits, IC cutouts and othe requipment sonthemeter board using 40mmdia 2.90mm thick GIpipe 2.5mlong buriedinapit. The pits hould be filled with equal proportion ofs al tand charcoal 150mm all round the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GIwire of size as per lSI spn.33ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia (Page No 54 INo 12.56 ) No 3510.0 3510.0 1.0 False None None False None False 3510.0 0 3286607 114188 None BPM 100 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws 110 mm (Page No 09 INo 3.10.3 ) No 21.0 21.0 10.0 False None None False None False 210.0 0 3286608 114188 None BPM 101 Supplying And fixing replacing of 6 16 32A electrical accessories on existing switch board. 16A SP Switch (Page No 10 INo 3.14.10 ) No 131.0 131.0 24.0 False None None False None False 3144.0 0 3286609 114188 None BPM 102 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP (Page No 17 INo 5.18.1 ) Each 415.0 415.0 3.0 False None None False None False 1245.0 0 3286610 114188 None BPM 103 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A DP (Page No 17 INo 5.18.4 ) Each 739.0 739.0 2.0 False None None False None False 1478.0 0 3286611 114188 None BPM 104 Supplying and fixing regular MCB distribution boards on wall/ood board flush mounting using required clA bolts nuts etcwith provision for fixing suitable type capacity MCBs single phase3 phase single door with powder coated painting Made out of 14 SWG MS enclosure.II Double Door 6 Way SP N (Page No 18 INo 5.19.7 ) Each 1552.0 1552.0 1.0 False None None False None False 1552.0 0 3286612 114188 None BPM 105 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240 450V upto 300mA sensitivity on existing wood panel board.32 40 A 4 pole (Page No 18 INo5.20.8 ) Each 5147.0 5147.0 1.0 False None None False None False 5147.0 0 3286613 114188 None BPM 106 Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz AC Supply. (Page No 30 Ino 6.1 ) Each 1492.0 1492.0 2.0 False None None False None False 2984.0 0 3286614 114188 None BPM 107 Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc, for operation on 230 V 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearing system. 48 Sweep (1200 mm) Regular model (Page No 30 Ino 6.3.1 ) Each 2984.0 2984.0 18.0 False None None False None False 53712.0 0 3286615 114188 None BPM 108 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input 220 240V 50 60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 20 22 W (Page No 43 Ino 11.3.2 ) Each 690.0 690.0 38.0 False None None False None False 26220.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718341376000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718341376000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1718341376000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1718341376000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1718341376000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718439324000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1718439330000 0 None None ELIGIBILITY The tenderer should quote his rates With all leads and lifts loading and un loading, including cost of Labour, hire charges of Machinery and other incidental charges etc complete as per the directions of the engineer incharge of the work specifications. None 1718439333000 0 None None ELIGIBILITY Defect liability period of 1 year and 1 year for major repairs to be considered.(Maintenance date starts from the date of completion period.) All the items included in the estimate are inclusive of lead and lift charges. None 1718439337000 0 None None ELIGIBILITY The work will be inspected by the third party & the bill will be admitted only after the satisfactory quality report from third party. None 1718439342000 0 None None ELIGIBILITY It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc. None 1718439346000 0 None None ELIGIBILITY Contractor should made an agreement within 20 days from the date of LOA. work should be commence within 2 weeks time from the date of work order. If not tender will be cancelled at the contractors own risk and cost. None 1718439349000 0 None None ELIGIBILITY All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost. None 1718439355000 0 None None ELIGIBILITY The Information on litigation in which the tender is involved are to be furnished None 1718439360000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive) None 1718439364000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1718439367000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 Qualification of the Tenderer in Section 2 Instructions to Tenderers will only be considered for evaluation None 1718439372000 0 None None ELIGIBILITY The rates of all the items appeared in Bill of Quantities are inclusive of all leads and lifts None 1718439377000 0 None None ELIGIBILITY Bidders are advised to note that, 18% GST will be added to the contract amount. None 1718439380000 0 None None ELIGIBILITY The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time None 1718439384000 0 None None ELIGIBILITY The bidder should mention the UDIN No on the turnover certificate failing which bid is rejected None 1718439388000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1718439393000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight of 10per per year to bring them to the price level of the 2023 24 in the Technical Qualification Criteria mentioned in the next section None 1718439399000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive). None 1718439403000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1718439409000 0 None None ELIGIBILITY Corrigendum modifications correction, if any, will be published in the website only, None 1718439413000 0 None None ELIGIBILITY Defect liability period will be TWO year None 1718439417000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e 2019-20 to 2023-24 a. Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Amount Put Tender (Turn over With compulsory UDIN Number) None 1718439421000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e 2019-20 to 2023-24 b. Satisfactorily completed, as prime contractor, at least one similar work of value not less than 50% of the amount put tender (Workdone with indent No) None 1718439437000 0 None None ELIGIBILITY Tenderer must have liquid assets and/or availability of credit facilities of not less than Rs.51.80 Lakhs Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. issued the Nationalised bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. (LOC as per bid document) None 1718439442000 0 None None ELIGIBILITY All other conditions and requirements has to be fulfilled as per the standard bid document and attached General conditions None 1718439459000 0 None None ELIGIBILITY Work completion period will be 9 months None 1718439493000 0 None None ELIGIBILITY The Project Completion period is 9 months and the defect liability period of the work is (2) Two year after successful completion of the work. (including Monsoon). None 1718439497000 0 None None ELIGIBILITY Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims shoulbe considered). None 1718439509000 0 None None ELIGIBILITY The Work constructed under this programme shall be of very high standard, requiring no major repairs for three (1)years after completion of construction the contractors shall have to give guarantee for 2 years maintenance None 1718439514000 0 None None ELIGIBILITY The Eligible Contractor Should Agree the KW-4 Bid Document Conditions. None 1718439520000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED BAGALKOTE within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. None 1718439528000 0 None None ELIGIBILITY Materials to be utiliszed for the work must be tested in PRED labs and quality control test reports must be enclosed to the bills. Cost of quality control tests must be borne by the contractor. None 1718439535000 0 None None ELIGIBILITY Participating bidders contractors in the tender should submit the following documents along with Technical Bid in addition to documents details required as per KW-4. None 1718439544000 0 None None ELIGIBILITY If there is any objection regarding tender, eligibility of contractors, documents etc. The objection must be submitted before last date & time of submission of tender directly to Executive Engineer, PRE Dn, BAGALKOTE. (Not in inward). None 1718439550000 0 None None ELIGIBILITY The contractor should provide daily there staff members on site None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Assessed available tender capacity (A x N x2.5-B) where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to ------- price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next.......years (period of completion of the works for which Tenders are invited) Note- a)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- bid capacity None None None None Tenderer must have liquid assets and /or availability of credit facilities of not less than Rs.51.80 Lakhs Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. issued the Nationalized bank should be furnished by the contractor And LOC issued by such a bank should be of unconditional nature. LOC issued by such a banks should be of UNCONDITIONAL Past Experience None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None To qualify for award of this contract, each tenderer in its name should have in the last five years, i.e. 2019-20 to 2023-24 achieved in at least two financial years an average annual financial turnover is not less than amount put tender in all classes of civil engineering construction works only of Rs. 310.78 Lakhs. with UDIN No. certified by Authorized charted Accountant.-turnover shall not be less than two times of amount put to tender Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years 2019-20, 2020-21, 2021-22 2022-23 and 2023-24 Satisfactorily completed, satisfactory completion as prime contractor, for at least one similar work such as Construction of Building work of value not less than Rs.77.70 Lakhs, Certificate to this, from a competent authority not below the rank of Executive Engineer should be enclosed. The work done certificate should mention the details of work executed and the date of commencement & date of completion of the work. (Workdone with indent No Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None PAN & GST Certificate Past Experience None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Contractor should upload contract registration copy enrolled in PWD/PRED-Class 1/above registration copy Past Experience None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Tenderer must have completed phy work done as perscribed in bid doc KW4 Executed in any year the following 80% quantities of work during last 2019 20 to 2023 24 provided in Earthwork Eaxcavation 1381.208 Cum PCC/RCC 302.84CUM BBM/UCR 110.72 CUM Plastering 1861.58 sqm Flooring 696.90 sqmTmt steel 22.824 tonne Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate
tenderCriterionDocumentList	documentName optional documentTypeText PWD/PRED Class-I & above Registration Certificate True Technical Bid Annual Turnover Certificate with UDIN Number True Technical Bid Work Done Certificate -Similar Nature True Technical Bid Quantity of Work Done True Technical Bid Bid Capacity True Technical Bid Unconditional Line of credit from Nationalized Bank True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Bagalkote Mudhol Bagalkot MUDHOL (SC) Bundi PM None None None None None None Buildings Bagalkote Mudhol Bagalkot MUDHOL (SC) Bundi PM None None None None None None Buildings Bagalkote Mudhol Bagalkot MUDHOL (SC) Bundi PM None None None None None None Buildings Bagalkote Mudhol Bagalkot MUDHOL (SC) Bundi PM None None None None None None
tenderAddress	createdTs 1718451222000 version 0 createdDate None modifiedDate None blockNumber superintending engineer circle office belagavi street None city Belagavi state Karnataka pin 590016
tenderRecallDTO	None