| 3321757 | 116320 | None | AEEBDM001 | CONSTRUCTION OF ANGANWADI CENTER NO-01 BUILDING IN HIREBUDIHAL VILLAGE OF GULEDAGUDDA TALUK(ANGANWADI CENTER NO-01)Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD CSR 2021-22 Vol -1 P.No.8 I.No 1.15.1)n ordinary/soft rock without blasting upto 1.5 m depth with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 299.0 | 299.0 | 6.39 | False | None | None | False | None | False | 1910.61 | 0 |
| 3321758 | 116320 | None | AEEBDM002 | 2.1Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma chine mixed, laid in layers not exceeding 150 mm thickness, well com pacted using plate vibrators, including all lead & lifts, cost of all materi als of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.2 Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2022,Vol-I P-15, I. No- 2.1.2 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 5206.0 | 5206.0 | 2.13 | False | None | None | False | None | False | 11088.78 | 0 |
| 3321759 | 116320 | None | AEEBDM003 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) .PWD CSR 2021-22 Volume -2 P No 9 ; I No 5.1.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 4750.0 | 4750.0 | 12.78 | False | None | None | False | None | False | 60705.0 | 0 |
| 3321760 | 116320 | None | AEEBDM004 | 2.5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. PWD SR 2022,Vol-I P-17, I. No- 2.5.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 6186.0 | 6186.0 | 1.29 | False | None | None | False | None | False | 7979.94 | 0 |
| 3321761 | 116320 | None | AEEBDM005 | Appendix I Additionalities for Formwork, Centering & Scaffolding For Column 70% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 4330.2 | 4330.2 | 1.29 | False | None | None | False | None | False | 5585.958 | 0 |
| 3321762 | 116320 | None | AEEBDM006 | 2.5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. PWD SR 2022,Vol-I P-17, I. No- 2.5.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 6182.0 | 6182.0 | 6.13 | False | None | None | False | None | False | 37895.66 | 0 |
| 3321763 | 116320 | None | AEEBDM007 | Appendix I Additionalities for Formwork, Centering & Scaffolding For Column 60% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 3709.2 | 3709.2 | 6.13 | False | None | None | False | None | False | 22737.396 | 0 |
| 3321764 | 116320 | None | AEEBDM008 | 2.5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. PWD SR 2022,Vol-I P-17, I. No- 2.5.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 6182.0 | 6182.0 | 10.57 | False | None | None | False | None | False | 65343.74 | 0 |
| 3321765 | 116320 | None | AEEBDM009 | Appendix I Additionalities for Formwork, Centering & Scaffolding For Column 50% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 3091.0 | 3091.0 | 10.57 | False | None | None | False | None | False | 32671.87 | 0 |
| 3321766 | 116320 | None | AEEBDM010 | 2.5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. PWD SR 2022,Vol-I P-17, I. No- 2.5.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 6182.0 | 6182.0 | 0.48 | False | None | None | False | None | False | 2967.36 | 0 |
| 3321767 | 116320 | None | AEEBDM011 | Appendix I Additionalities for Formwork, Centering & Scaffolding For Column 45% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 2781.9 | 2781.9 | 0.48 | False | None | None | False | None | False | 1335.312 | 0 |
| 3321768 | 116320 | None | AEEBDM012 | Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (PWD CSR 2022 Vol-2 Page No-84 Item No 11.32) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Kg | 92.0 | 92.0 | 1429.72 | False | None | None | False | None | False | 131534.24 | 0 |
| 3321769 | 116320 | None | AEEBDM013 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.. (PWD CSR 2021-22 Vol -2 P No-14 I No-6.8 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Cum | 6690.0 | 6690.0 | 30.07 | False | None | None | False | None | False | 201168.3 | 0 |
| 3321770 | 116320 | None | AEEBDM014 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD CSR 2021-22 Vol -2 P No-41 I No-8.1.1 ) | Sqm | 213.0 | 213.0 | 192.2 | False | None | None | False | None | False | 40938.6 | 0 |
| 3321771 | 116320 | None | AEEBDM015 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2021-22 Volume -2 P.No-42 I.No-8.9 | Sqm | 322.0 | 322.0 | 278.27 | False | None | None | False | None | False | 89602.94 | 0 |
| 3321772 | 116320 | None | AEEBDM016 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. PWD CSR 2021-22 Volume 2 P.No-100 I.No-12.12 | Cum | 75344.0 | 75344.0 | 0.12 | False | None | None | False | None | False | 9041.28 | 0 |
| 3321773 | 116320 | None | AEEBDM017 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. PWD CSR 2021-22 Volume -2 P.No-105 I.No-12.51 | No | 1485.0 | 1485.0 | 2.0 | False | None | None | False | None | False | 2970.0 | 0 |
| 3321774 | 116320 | None | AEEBDM018 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) (PWD Common Schedule of Rate 2021-22 Page No-100 Item No-12.15 (Vol -2) | Sqm | 5074.0 | 5074.0 | 3.23 | False | None | None | False | None | False | 16389.02 | 0 |
| 3321775 | 116320 | None | AEEBDM019 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD CSR 2021-22 Volume -2 P.No-85 I.No-11.34A | Kg | 131.0 | 131.0 | 136.08 | False | None | None | False | None | False | 17826.48 | 0 |
| 3321776 | 116320 | None | AEEBDM020 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock Wall thickness of frame& sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) PWD CSR 2021-22 Volume -2 P.No-110 I.No-12.86 | Sqm | 5842.0 | 5842.0 | 7.56 | False | None | None | False | None | False | 44165.52 | 0 |
| 3321777 | 116320 | None | AEEBDM021 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(PWD Common Schedule of Rate 2021-22 Page No-105 Item No-12.54 (Vol -2) | Sqm | 475.0 | 475.0 | 1.24 | False | None | None | False | None | False | 589.0 | 0 |
| 3321778 | 116320 | None | AEEBDM022 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges.(PWD Common Schedule of Rate 2021-22 Page No-105 Item No-12.53 (Vol -2) | Sqm | 287.0 | 287.0 | 1.24 | False | None | None | False | None | False | 355.88 | 0 |
| 3321779 | 116320 | None | AEEBDM023 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.(PWD CSR 2021-22 Vol -2 P.No-64 / I.No-9.30 ) | Sqm | 2391.0 | 2391.0 | 71.78 | False | None | None | False | None | False | 171625.98 | 0 |
| 3321780 | 116320 | None | AEEBDM024 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete..(PWD Common Schedule of Rate 2021-22 Page No-60 Item No-9.9 (Vol -2) | Sqm | 605.0 | 605.0 | 3.6 | False | None | None | False | None | False | 2178.0 | 0 |
| 3321781 | 116320 | None | AEEBDM025 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.(PWD Common Schedule of Rate 2021-22 Page No-71 Item No-10.14 (Vol -2) | Sqm | 964.0 | 964.0 | 10.49 | False | None | None | False | None | False | 10112.36 | 0 |
| 3321782 | 116320 | None | AEEBDM026 | 2.5cms thick Shahabad slabs(PWD Common Schedule of Rate 2021-22 Page No-A-33 SI No-10.14 (Vol -2) | Sqm | 355.0 | 355.0 | 16.11 | False | None | None | False | None | False | 5719.05 | 0 |
| 3321783 | 116320 | None | AEEBDM027 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common Schedule of Rate 2021-22 Page No-46 Item No-8.33.2 Vol -2) | Sqm | 105.0 | 105.0 | 10.65 | False | None | None | False | None | False | 1118.25 | 0 |
| 3321784 | 116320 | None | AEEBDM028 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge (PWD Common Schedule of Rate 2021-22 Page No-50 Item No-8.51 (Vol -2) | Sqm | 83.0 | 83.0 | 219.69 | False | None | None | False | None | False | 18234.27 | 0 |
| 3321785 | 116320 | None | AEEBDM029 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common Schedule of Rate 2021-22 Page No-45 Item No-8.25 Vol -2) | Sqm | 105.0 | 105.0 | 258.5 | False | None | None | False | None | False | 27142.5 | 0 |
| 3321786 | 116320 | None | AEEBDM030 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common Schedule of Rate 2021-22 Page No-46 Item No-8.30 Vol -2) | Sqm | 136.0 | 136.0 | 298.02 | False | None | None | False | None | False | 40530.72 | 0 |
| 3321787 | 116320 | None | AEEBDM031 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(PWD Common Schedule of Rate 2021-22 Page No.123, Item No. 14.1.1 Vol -2) | No | 4246.0 | 4246.0 | 1.0 | False | None | None | False | None | False | 4246.0 | 0 |
| 3321788 | 116320 | None | AEEBDM032 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.PWD CSR 2021-22 Vol -2 P.No- I.No-13.34 | l | 8.0 | 8.0 | 1000.0 | False | None | None | False | None | False | 8000.0 | 0 |
| 3321789 | 116320 | None | AEEBDM033 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm ,nominal dia Pipes PWD CSR 2021-22 Vol -2 P.No- SI.No-13.33.3 | m | 299.0 | 299.0 | 30.0 | False | None | None | False | None | False | 8970.0 | 0 |
| 3321790 | 116320 | None | AEEBDM034 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer(PWD Common Schedule of Rate 2021-22 Page No.125, Item No. 14.7A Vol -2) | No | 3778.95 | 3778.95 | 1.0 | False | None | None | False | None | False | 3778.95 | 0 |
| 3321791 | 116320 | None | AEEBDM035 | 15 mm C.P.brass tap PWD CSR 2021-22 Vol -2 P.No- A-33 SI.No-694 | No | 270.0 | 270.0 | 2.0 | False | None | None | False | None | False | 540.0 | 0 |
| 3321792 | 116320 | None | AEEBDM036 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal sibility for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 63 mm ,nominal dia Pipes PWD CSR 2021-22 Vol -2 P.No- SI.No-13.33.7 | m | 1397.0 | 1397.0 | 12.0 | False | None | None | False | None | False | 16764.0 | 0 |
| 3321793 | 116320 | None | AEEBDM037 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD CSR 2021-22 Vol -2, P No.83 I No 11.28 ) | Kg | 500.0 | 500.0 | 63.0 | False | None | None | False | None | False | 31500.0 | 0 |
| 3321794 | 116320 | None | AEEBDM038 | Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level , including cost of materials, labour and Usage charges of machinery complete as per specifications. (PWD CSR 2021-22 Volume -2 Page No.64 Item No 9.31) | Sqm | 1087.0 | 1087.0 | 12.5 | False | None | None | False | None | False | 13587.5 | 0 |
| 3321795 | 116320 | None | AEEBDM039 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specificationsand as per directions of the Engineer-in-ChargePWD CSR 2021-22 Volume -2 P.No 75. I.No 11.3 | Sqm | 6563.0 | 6563.0 | 5.04 | False | None | None | False | None | False | 33077.52 | 0 |
| 3321796 | 116320 | None | AEEBDM040 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD CSR 2021-22 Volume -2 P.No 75. I.No 11.4 | Sqm | 4330.0 | 4330.0 | 5.04 | False | None | None | False | None | False | 21823.2 | 0 |
| 3321797 | 116320 | None | AEEBDM041 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ( P No 2 ; I No 1.2.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 40.0 | 40.0 | 45.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 3321798 | 116320 | None | AEEBDM042 | Supplying heavy gauge PVC Conduit Pipe ….dia .....mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 51.0 | 51.0 | 20.0 | False | None | None | False | None | False | 1020.0 | 0 |
| 3321799 | 116320 | None | AEEBDM043 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood. After due groove cutting, necessary masonary patch work complete. 10''x7''x3 (254x178x76mm) ( P No 3 ; I No 1.6.3) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 77.0 | 77.0 | 4.0 | False | None | None | False | None | False | 308.0 | 0 |
| 3321800 | 116320 | None | AEEBDM044 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Short point upto 3Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Point | 200.0 | 200.0 | 4.0 | False | None | None | False | None | False | 800.0 | 0 |
| 3321801 | 116320 | None | AEEBDM045 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Medium point above 3M. upto 6M from tapping point to out let via switch ( P No 5 ; I No 2.1.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Point | 275.0 | 275.0 | 6.0 | False | None | None | False | None | False | 1650.0 | 0 |
| 3321802 | 116320 | None | AEEBDM046 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.3) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Point | 400.0 | 400.0 | 4.0 | False | None | None | False | None | False | 1600.0 | 0 |
| 3321803 | 116320 | None | AEEBDM047 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 1 sqmm (P.No. 5, I.No. 2.3.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 14.0 | 14.0 | 80.0 | False | None | None | False | None | False | 1120.0 | 0 |
| 3321804 | 116320 | None | AEEBDM048 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 2.5 sqmm (P.No. 5&6, I.No. 2.3.3) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 32.0 | 32.0 | 150.0 | False | None | None | False | None | False | 4800.0 | 0 |
| 3321805 | 116320 | None | AEEBDM049 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials. 4 sqmm (P.No. 5&6, I.No. 2.3.4) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 45.0 | 45.0 | 50.0 | False | None | None | False | None | False | 2250.0 | 0 |
| 3321806 | 116320 | None | AEEBDM050 | Supply 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush monted wooden box and wiring using necessary capacity wires as required. 6 Amps 3/5 Way ( P No 9 ; I No 3.1.2 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 132.0 | 132.0 | 12.0 | False | None | None | False | None | False | 1584.0 | 0 |
| 3321807 | 116320 | None | AEEBDM051 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854 and IS 1293. 32 Amps DP switch( P No 10 ; I No 3.6.10) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 182.0 | 182.0 | 4.0 | False | None | None | False | None | False | 728.0 | 0 |
| 3321808 | 116320 | None | AEEBDM052 | Supplying and fixing of modular switch & connected
accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps Univerals socket ( P No 10 ; I No 3.6.11) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 162.0 | 162.0 | 8.0 | False | None | None | False | None | False | 1296.0 | 0 |
| 3321809 | 116320 | None | AEEBDM053 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Electronic stepped regulator. ( P No 10 ; I No 3.6.4) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 290.0 | 290.0 | 2.0 | False | None | None | False | None | False | 580.0 | 0 |
| 3321810 | 116320 | None | AEEBDM054 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.(P No 10 ; I No 3.9) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Sq CM | 0.24 | 0.24 | 2200.0 | False | None | None | False | None | False | 528.0 | 0 |
| 3321811 | 116320 | None | AEEBDM055 | Supply of round/square recess/surface mounted rolling
type LED Down light with .......W GU 10 LED Lamp Rib
Fabricated from Die cast aluminium with white powder
coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ( P No 65 ; I No 12.5.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 768.0 | 768.0 | 10.0 | False | None | None | False | None | False | 7680.0 | 0 |
| 3321812 | 116320 | None | AEEBDM056 | Supplying and fixing polished wood board made of not lees then 15mm thick plank on both side with planks made out of more then 2 pieces and fixing the same to the wall using taperd inverted wooden flugs screws etc. 8"*6"*1.5" (P.No.24.,I.No.5.6.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 70.0 | 70.0 | 4.0 | False | None | None | False | None | False | 280.0 | 0 |
| 3321813 | 116320 | None | AEEBDM057 | Supplying & fixing of porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and washers etc, complete. 32 Amps (P.No.24&25,I.No.5.7.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 174.0 | 174.0 | 4.0 | False | None | None | False | None | False | 696.0 | 0 |
| 3321814 | 116320 | None | AEEBDM058 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP (P.No. 27 I.No. 5.17.4 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 909.0 | 909.0 | 2.0 | False | None | None | False | None | False | 1818.0 | 0 |
| 3321815 | 116320 | None | AEEBDM059 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.( II Double Door). 8 way SP&N P.No.27&28, I.No. 5.18.7) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 1450.0 | 1450.0 | 3.0 | False | None | None | False | None | False | 4350.0 | 0 |
| 3321816 | 116320 | None | AEEBDM060 | Supplying, fixing & wiring, earth electrode for ground conduits. I.C. cutouts and other equipements, on the meter board using 40mm dia 2.90 thick of GI pipe 2.5 mtr long burid in a pit. The pit sholud be gilled with equal pro[ortion of salt and charcoal 150mm alround the pipe to completedepth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per clause 7.3.3 of is 732 using 12mm dia bolts, nuts, washers, & check nut etc., The pipe shall have 16 through holes of 12mm dia. (P.No.40,I.No.6.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 2999.7 | 2999.7 | 1.0 | False | None | None | False | None | False | 2999.7 | 0 |
| 3321817 | 116320 | None | AEEBDM061 | Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2mm thick.(P No 2 ; I No 1.1.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | Mtr | 50.0 | 50.0 | 28.0 | False | None | None | False | None | False | 1400.0 | 0 |
| 3321818 | 116320 | None | AEEBDM062 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48'' Sweep (1200)mm Regular model (P.No. 46 I.No. 7.3.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 2090.0 | 2090.0 | 2.0 | False | None | None | False | None | False | 4180.0 | 0 |
| 3321819 | 116320 | None | AEEBDM063 | Supplying and Fixing of........mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 32 mm dia GI pipe (P No 79 ; I No 14.1.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 835.0 | 835.0 | 1.0 | False | None | None | False | None | False | 835.0 | 0 |
| 3321820 | 116320 | None | AEEBDM064 | Fixing all types and all capacities fluorescent/ false ceiling/spot light/ CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076'' twin PVC insulated wires, required nos of round blocks and clamps (if required) On wall/ceiling/Rafter/Girders (P.No.79, I.No. 14.7.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 110.0 | 110.0 | 9.0 | False | None | None | False | None | False | 990.0 | 0 |
| 3321821 | 116320 | None | AEEBDM065 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. (P No 80 ; I No 14.9) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge | No | 260.0 | 260.0 | 2.0 | False | None | None | False | None | False | 520.0 | 0 |