| 1718876831000 | 0 | None | None | Buildings | CONSTRUCTION OF PARKING SHED FOR SWM VEHICLES IN MANVI TOWN | 1682769.35 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3317983 | 116056 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 198.45 | 198.45 | 27.65 | False | None | None | False | None | False | 5487.1425 | 0 | | 3317984 | 116056 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 3.46 | False | None | None | False | None | False | 21758.037 | 0 | | 3317985 | 116056 | None | code03 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. PWD CSR Vol-1 2023-24 P.No.15, I.No.2.2.1 (Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding on finished rate of concrete per m3 Page 111 Sl no. 1.b) | Cum | 6799.39 | 6799.39 | 7.2 | False | None | None | False | None | False | 48955.608 | 0 | | 3317986 | 116056 | None | code04 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR Vol-1 2023-24 P.No.16, I.No.2.5.1 (Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding on finished rate of concrete per m3 Page 111 Sl no. 9 and Sl no.2 respectively) | Cum | 11222.3 | 11222.3 | 4.608 | False | None | None | False | None | False | 51712.3584 | 0 | | 3317987 | 116056 | None | code05 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 154.35 | 154.35 | 3960.0 | False | None | None | False | None | False | 611226.0 | 0 | | 3317988 | 116056 | None | code06 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 86.1 | 86.1 | 200.0 | False | None | None | False | None | False | 17220.0 | 0 | | 3317989 | 116056 | None | code07 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 596.4 | 596.4 | 240.0 | False | None | None | False | None | False | 143136.0 | 0 | | 3317990 | 116056 | None | code08 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. h. All other type of structures PWD CSR Vol-1 2023-24 P.No.18, I.No.2.11.h | Tonne | 82961.55 | 82961.55 | 0.44 | False | None | None | False | None | False | 36503.082 | 0 | | 3317991 | 116056 | None | code09 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. | Cum | 1746.15 | 1746.15 | 54.05 | False | None | None | False | None | False | 94379.4075 | 0 | | 3317992 | 116056 | None | code10 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth | Cum | 380.1 | 380.1 | 66.24 | False | None | None | False | None | False | 25177.824 | 0 | | 3317993 | 116056 | None | code11 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | Cum | 2686.95 | 2686.95 | 66.24 | False | None | None | False | None | False | 177983.568 | 0 | | 3317994 | 116056 | None | code12 | Providing and Laying Stone crusher dust finer than 3mm, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications | Cum | 1298.85 | 1298.85 | 43.2 | False | None | None | False | None | False | 56110.32 | 0 | | 3317995 | 116056 | None | code13 | Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for Industrial Streets, Bus & Truck parking of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) | Sqm | 1365.0 | 1365.0 | 288.0 | False | None | None | False | None | False | 393120.0 | 0 |
|