| 3318106 | 116064 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 102.0 | 102.0 | 127.74 | False | None | None | False | None | False | 13029.48 | 0 |
| 3318107 | 116064 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 5664.0 | 5664.0 | 9.13 | False | None | None | False | None | False | 51712.32 | 0 |
| 3318108 | 116064 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 6389.0 | 6389.0 | 7.499 | False | None | None | False | None | False | 47911.111 | 0 |
| 3318109 | 116064 | None | code04 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 6842.88 | 6842.88 | 38.14 | False | None | None | False | None | False | 260987.4432 | 0 |
| 3318110 | 116064 | None | code05 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 9720.0 | 9720.0 | 1.02 | False | None | None | False | None | False | 9914.4 | 0 |
| 3318111 | 116064 | None | code06 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 11633.09 | 11633.09 | 1.14 | False | None | None | False | None | False | 13261.7226 | 0 |
| 3318112 | 116064 | None | code07 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 10948.8 | 10948.8 | 1.7 | False | None | None | False | None | False | 18612.96 | 0 |
| 3318113 | 116064 | None | code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 10264.5 | 10264.5 | 2.01 | False | None | None | False | None | False | 20631.645 | 0 |
| 3318114 | 116064 | None | code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. this rate is inclusive of formwork | Cum | 9922.35 | 9922.35 | 0.5309 | False | None | None | False | None | False | 5267.775615 | 0 |
| 3318115 | 116064 | None | code10 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | t | 89457.0 | 89457.0 | 4.454 | False | None | None | False | None | False | 398441.478 | 0 |
| 3318116 | 116064 | None | code11 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 7969.0 | 7969.0 | 6.59 | False | None | None | False | None | False | 52515.71 | 0 |
| 3318117 | 116064 | None | code12 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 312.0 | 312.0 | 42.93 | False | None | None | False | None | False | 13394.16 | 0 |
| 3318118 | 116064 | None | code13 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 349.0 | 349.0 | 64.57 | False | None | None | False | None | False | 22534.93 | 0 |
| 3318119 | 116064 | None | code14 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 211.0 | 211.0 | 19.9 | False | None | None | False | None | False | 4198.9 | 0 |
| 3318120 | 116064 | None | code15 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 1636.0 | 1636.0 | 11.44 | False | None | None | False | None | False | 18715.84 | 0 |
| 3318121 | 116064 | None | code16 | Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/rice husk/
wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 g) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum
frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)
Size 62 x 125mm | Rmtr | 764.0 | 764.0 | 6.6 | False | None | None | False | None | False | 5042.4 | 0 |
| 3318122 | 116064 | None | code17 | Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S
framework required with priming coat shall be paid separately). | Sqm | 4411.0 | 4411.0 | 1.89 | False | None | None | False | None | False | 8336.79 | 0 |
| 3318123 | 116064 | None | code18 | Providing & fixing of 2-track x 2-panel sliding windows made out of multichambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE ( Thermal Plastic Elastomer) and lead free, gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P s shall
not be made) | Sqm | 5390.0 | 5390.0 | 8.1 | False | None | None | False | None | False | 43659.0 | 0 |
| 3318124 | 116064 | None | code19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 137.0 | 137.0 | 52.93 | False | None | None | False | None | False | 7251.41 | 0 |
| 3318125 | 116064 | None | code20 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 53.0 | 53.0 | 19.98 | False | None | None | False | None | False | 1058.94 | 0 |
| 3318126 | 116064 | None | code21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 115.0 | 115.0 | 19.98 | False | None | None | False | None | False | 2297.7 | 0 |
| 3318127 | 116064 | None | code22 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Sqm | 89.0 | 89.0 | 72.97 | False | None | None | False | None | False | 6494.33 | 0 |
| 3318128 | 116064 | None | code23 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 474.0 | 474.0 | 159.0 | False | None | None | False | None | False | 75366.0 | 0 |
| 3318129 | 116064 | None | code24 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 2487.0 | 2487.0 | 53.55 | False | None | None | False | None | False | 133178.85 | 0 |
| 3318130 | 116064 | None | code25 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 4920.0 | 4920.0 | 35.7 | False | None | None | False | None | False | 175644.0 | 0 |
| 3318131 | 116064 | None | code26 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepare sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 6754.0 | 6754.0 | 71.4 | False | None | None | False | None | False | 482235.6 | 0 |
| 3318132 | 116064 | None | code27 | Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Cum | 1029.0 | 1029.0 | 44.55 | False | None | None | False | None | False | 45841.95 | 0 |
| 3318133 | 116064 | None | code28 | Supplying, installing and errrection of 60 MT Weigh Bridge Platform with all machinery & accessories with all lead and lifts complete as per specification and as directred by the Engineer incharge of the work this rate is inclusive of GST | Set | 968000.0 | 968000.0 | 1.0 | False | None | None | False | None | False | 968000.0 | 0 |
| 3318134 | 116064 | None | code29 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever ecessary.25 mm dia 2 mm thick.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 78.0 | 78.0 | 20.0 | False | None | None | False | None | False | 1560.0 | 0 |
| 3318135 | 116064 | None | code30 | Supplying heavy gauge PVC Conduit Pipe ….dia ....mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary..25 mm dia 2 mm thick.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 79.0 | 79.0 | 15.0 | False | None | None | False | None | False | 1185.0 | 0 |
| 3318136 | 116064 | None | code31 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50mm conduit in brick wall with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 29.0 | 29.0 | 10.0 | False | None | None | False | None | False | 290.0 | 0 |
| 3318137 | 116064 | None | code32 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50mm conduit CC floor with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 69.0 | 69.0 | 5.0 | False | None | None | False | None | False | 345.0 | 0 |
| 3318138 | 116064 | None | code33 | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 90 x 65 mm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 179.0 | 179.0 | 1.0 | False | None | None | False | None | False | 179.0 | 0 |
| 3318139 | 116064 | None | code34 | Supplying and fixing PVC/metal conduit Deep junction box.25mm deep junction box with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 56.0 | 56.0 | 1.0 | False | None | None | False | None | False | 56.0 | 0 |
| 3318140 | 116064 | None | code35 | Supplying And Fixing Metal Fan Box with Round Hook.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 117.0 | 117.0 | 2.0 | False | None | None | False | None | False | 234.0 | 0 |
| 3318141 | 116064 | None | code36 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Point | 269.0 | 269.0 | 1.0 | False | None | None | False | None | False | 269.0 | 0 |
| 3318142 | 116064 | None | code37 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3M. upto 6M from tapping point to out let via switch with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Point | 379.0 | 379.0 | 2.0 | False | None | None | False | None | False | 758.0 | 0 |
| 3318143 | 116064 | None | code38 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr. upto 10M from tapping point to out let via switch with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Point | 555.0 | 555.0 | 2.0 | False | None | None | False | None | False | 1110.0 | 0 |
| 3318144 | 116064 | None | code39 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1 sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 19.0 | 19.0 | 10.0 | False | None | None | False | None | False | 190.0 | 0 |
| 3318145 | 116064 | None | code40 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 26.0 | 26.0 | 20.0 | False | None | None | False | None | False | 520.0 | 0 |
| 3318146 | 116064 | None | code41 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 42.0 | 42.0 | 60.0 | False | None | None | False | None | False | 2520.0 | 0 |
| 3318147 | 116064 | None | code42 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 63.0 | 63.0 | 60.0 | False | None | None | False | None | False | 3780.0 | 0 |
| 3318148 | 116064 | None | code43 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.3 way with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Each | 159.0 | 159.0 | 1.0 | False | None | None | False | None | False | 159.0 | 0 |
| 3318149 | 116064 | None | code44 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8 way with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Each | 261.0 | 261.0 | 2.0 | False | None | None | False | None | False | 522.0 | 0 |
| 3318150 | 116064 | None | code45 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.10-12 way (KPWD ELE SR 2023-24,P.No. 3, I.No.3.1.6 ) | Each | 319.0 | 319.0 | 1.0 | False | None | None | False | None | False | 319.0 | 0 |
| 3318151 | 116064 | None | code46 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Each | 161.0 | 161.0 | 1.0 | False | None | None | False | None | False | 161.0 | 0 |
| 3318152 | 116064 | None | code47 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 284.0 | 284.0 | 2.0 | False | None | None | False | None | False | 568.0 | 0 |
| 3318153 | 116064 | None | code48 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 344.0 | 344.0 | 1.0 | False | None | None | False | None | False | 344.0 | 0 |
| 3318154 | 116064 | None | code49 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way.(KPWD ELE SR 2023-24,PART-3,P.NO 9,3.6.1) | No | 102.0 | 102.0 | 7.0 | False | None | None | False | None | False | 714.0 | 0 |
| 3318155 | 116064 | None | code50 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 171.0 | 171.0 | 4.0 | False | None | None | False | None | False | 684.0 | 0 |
| 3318156 | 116064 | None | code51 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 357.0 | 357.0 | 2.0 | False | None | None | False | None | False | 714.0 | 0 |
| 3318157 | 116064 | None | code52 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 180.0 | 180.0 | 2.0 | False | None | None | False | None | False | 360.0 | 0 |
| 3318158 | 116064 | None | code53 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 236.0 | 236.0 | 2.0 | False | None | None | False | None | False | 472.0 | 0 |
| 3318159 | 116064 | None | code54 | Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6A Batten Holder. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 74.0 | 74.0 | 3.0 | False | None | None | False | None | False | 222.0 | 0 |
| 3318160 | 116064 | None | code55 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 415.0 | 415.0 | 3.0 | False | None | None | False | None | False | 1245.0 | 0 |
| 3318161 | 116064 | None | code56 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 Amps TPN. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 3088.0 | 3088.0 | 1.0 | False | None | None | False | None | False | 3088.0 | 0 |
| 3318162 | 116064 | None | code57 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 4 Way TP & N with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 4038.0 | 4038.0 | 1.0 | False | None | None | False | None | False | 4038.0 | 0 |
| 3318163 | 116064 | None | code58 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board 63 Amps 4 pole with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 5545.0 | 5545.0 | 1.0 | False | None | None | False | None | False | 5545.0 | 0 |
| 3318164 | 116064 | None | code59 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 401.0 | 401.0 | 3.0 | False | None | None | False | None | False | 1203.0 | 0 |
| 3318165 | 116064 | None | code60 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Each | 1380.0 | 1380.0 | 1.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 3318166 | 116064 | None | code61 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.. 300mmx300mmx214mm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Each | 4512.0 | 4512.0 | 1.0 | False | None | None | False | None | False | 4512.0 | 0 |
| 3318167 | 116064 | None | code62 | Supplying,fixing,wiring,earth electrode for grounding conduits,I.C.cutouts and other equipment's on the mete rboard using 40mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit.The pit should be filled with equal proportion of salt and char coal150mm all-round the pipe to complete depth.The connection from the pipe to the conduit etc.,is to be established through GI wire of size as per lSI specification7.3.3.of IS732 using 12 mm dia bolts,nuts,washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 4256.0 | 4256.0 | 2.0 | False | None | None | False | None | False | 8512.0 | 0 |
| 3318168 | 116064 | None | code63 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip GI Strip. 25x3mm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 82.0 | 82.0 | 12.0 | False | None | None | False | None | False | 984.0 | 0 |
| 3318169 | 116064 | None | code64 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate.with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 7421.0 | 7421.0 | 2.0 | False | None | None | False | None | False | 14842.0 | 0 |
| 3318170 | 116064 | None | code65 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG. Copper Wire with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 58.0 | 58.0 | 20.0 | False | None | None | False | None | False | 1160.0 | 0 |
| 3318171 | 116064 | None | code66 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 3.0 | 3.0 | 2.0 | False | None | None | False | None | False | 6.0 | 0 |
| 3318172 | 116064 | None | code67 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 4.0 | 4.0 | 6.0 | False | None | None | False | None | False | 24.0 | 0 |
| 3318173 | 116064 | None | code68 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 4sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 7.0 | 7.0 | 4.0 | False | None | None | False | None | False | 28.0 | 0 |
| 3318174 | 116064 | None | code69 | Providing and laying in position 100mm dia stone ware pipe in existing trench. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 215.0 | 215.0 | 10.0 | False | None | None | False | None | False | 2150.0 | 0 |
| 3318175 | 116064 | None | code70 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05mm thick Aluminum Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor . Temp rise Shall not exceed 75 dig over and ambient of 40 0C by resistance method at 245Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty48" Sweep 5 Star (1200mm) with all leads and lift complete as per specification and as directed by the Engineer IN charge of the work. | No | 2677.0 | 2677.0 | 2.0 | False | None | None | False | None | False | 5354.0 | 0 |
| 3318176 | 116064 | None | code71 | Supplying of ..feet - PVC Batten with integrated LED tube. W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4 20/22 w with all leads and lift complete as per specification and as directed by the Engineer IN charge of the work. | No | 690.0 | 690.0 | 3.0 | False | None | None | False | None | False | 2070.0 | 0 |
| 3318177 | 116064 | None | code72 | Supply of LED Streetlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate material, delivering superior light output. Rated life Burning Hrs. 50000 hr. Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mounting with outer dial of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001 2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Limited's/Osram make LED Source. LED Streetlight 40W with all leads and lift complete as per specification and as directed by the Engineer IN charge of the work. | No | 4024.0 | 4024.0 | 1.0 | False | None | None | False | None | False | 4024.0 | 0 |
| 3318178 | 116064 | None | code73 | Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed forfixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 1203.0 | 1203.0 | 1.0 | False | None | None | False | None | False | 1203.0 | 0 |
| 3318179 | 116064 | None | code74 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 162.0 | 162.0 | 1.0 | False | None | None | False | None | False | 162.0 | 0 |
| 3318180 | 116064 | None | code75 | Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 122.0 | 122.0 | 3.0 | False | None | None | False | None | False | 366.0 | 0 |
| 3318181 | 116064 | None | code76 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 315.0 | 315.0 | 2.0 | False | None | None | False | None | False | 630.0 | 0 |
| 3318182 | 116064 | None | code77 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Km | 179844.0 | 179844.0 | 0.03 | False | None | None | False | None | False | 5395.32 | 0 |
| 3318183 | 116064 | None | code78 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Km | 20886.0 | 20886.0 | 0.03 | False | None | None | False | None | False | 626.58 | 0 |
| 3318184 | 116064 | None | code79 | Heavy Duty Copper Terminal Long Barrel.25 Sqmm Copper Terminal, Apprx Wt: 11 Gm with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | No | 27.0 | 27.0 | 8.0 | False | None | None | False | None | False | 216.0 | 0 |
| 3318185 | 116064 | None | code80 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr BESCOM SR PART-4,P.NO.8, IT No-29.02 -Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 484.0 | 484.0 | 11.25 | False | None | None | False | None | False | 5445.0 | 0 |
| 3318186 | 116064 | None | code81 | Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr with all leads and lift complete as per specification and as directed by the Engineer incharge of the work. | Mtr | 58.0 | 58.0 | 11.25 | False | None | None | False | None | False | 652.5 | 0 |