| 1719236404000 | 0 | None | None | Roads | Construction of C.C road at 7th Mile Camp in Sindhanur taluka of Raichur District. Under KKRDB Saving grant for the year 2023-24 | 967319.23 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3338858 | 117228 | None | 001 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction with all lead and lifts etc., complete and as directed by the Engineer-in-charge of work. | Cum | 110.25 | 110.25 | 59.44 | False | None | None | False | None | False | 6553.26 | 0 | | 3338859 | 117228 | None | 002 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 with all lead and lifts etc., complete and as directed by the Engineer-in-charge of work. | Cum | 517.65 | 517.65 | 117.69 | False | None | None | False | None | False | 60922.2285 | 0 | | 3338860 | 117228 | None | 003 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -III Material with all lead and lifts etc., complete and as directed by the Engineer-in-charge of work. | Cum | 2636.55 | 2636.55 | 44.57 | False | None | None | False | None | False | 117511.0335 | 0 | | 3338861 | 117228 | None | 004 | Providing, laying and spreading material on a prepared sub grade, adding the adding the designed quantity of cement to the spread .material, mixing in place with rotavator grading with motor grader and compacting with the road roller at OMC to achieve at least desired unconfined compressive strength & to form a layer of sub-base/base with all lead and lifts etc., complete and as directed by the Engineer-in-charge of work. | Cum | 2686.95 | 2686.95 | 44.58 | False | None | None | False | None | False | 119784.231 | 0 | | 3338862 | 117228 | None | 005 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. | Cum | 7178.85 | 7178.85 | 89.15 | False | None | None | False | None | False | 639994.4775 | 0 | | 3338863 | 117228 | None | 006 | Providing and fixing of typical 'Citizen Information Board A" as per specifications and drawing. Two ACP Sheet of 4mm thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back support of Ms plate of 5mm thick. Supported on frame post of 2 no's of MS Suare hallow section 75mmx75mmx6mm which is duly embedded in cement concrete M20 Grade of 600x600x750mm,600mm below ground level.All MS will be stove enameled on both the sides.All sections of framed posts,MS sheet and Stell tubes will be painted with primer and two coats of epoxy paint as per drawing etc.Retro-Reflective Sheet as per IRC 67 fixted over a two no's of Aluminum composite material(ACP) sheeting of size 900x750mm of 4mm thick duly bolted/reveted with MS plate of 5mm thick on backside of ACP Sheet.Including cost and conveyance of all materials,equipment,machinery and labour with all leads and lifts,loading charges charges necessary for satisfactory completion of work as per directed by engineer incharge. (i) For warranty and durability the clause 1701.5 and for maintenance the clause 1911 shall be applicable. (ii) A reference number along with the month and year of installation should be placed on the back of a sign in a contrasting colour or by stamping in characters not exceeding 50 mm in height.485777/2019/Dir(Tech) 7 Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1 | Each | 22554.0 | 22554.0 | 1.0 | False | None | None | False | None | False | 22554.0 | 0 |
|