createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719046769204 version 12 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 940.00 emd 63470.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 02-07-2024 17:00:00 tenderQueryClose 01-07-2024 17:30:00 technicalBidOpen 03-07-2024 17:30:00 publishedDate 24-06-2024 17:05:36 publishedByPost CMC_MCOM_CLK publishedByUser KPE16301 - JEEVAN bidValidityPeriod 90 noOfCalls 4 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Vinay K splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9844557732 tenderSupplierList None
tenderSchedule	createdTs 1719046769209 version 28 createdDate None modifiedDate None tenderNumber DMA/2023-24/BD/WORK_INDENT6738/CALL-4 title PACKAGE-1/SFCCA/23-24/1 Consrtuction of Compound for karikal kere pumphouse and IB in Chitradurga main at challakere city description Construction of Compound under safety measures for karikal kere pumphouse in nayakanahtti road at CMC Challakere limit. Construction of Compound under safety measures and paint to OHT is in I B premises and construction of storage room under OHT in chitradurga main road at CMC Challakere limit. category WORKS categoryText Works ecv 3744530.32 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2278 locationName DMA City Municipal Council Challakere provisionalAmount 3746000.0 groupOverheadTotal 571199.54 fileNumber DMA/CMCCLK/SFCCA/23-24/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719046769000 1 None None Buildings Construction of Compound under safety measures for karikal kere pumphouse in nayakanahtti road at CMC Challakere limit. 1668865.14 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3332425 116795 Volume -1-Common SR- Chapter - I- Earth Work 1.14.1 In all kinds of soils Depth upto 3 m Cum 73.0 75.19 81.56 False None None False None False 6132.4964 0 3332428 116795 Volume-2-For Buildings Chapter-21-Conservation of Heritage Buildings 21.10 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, curing complete as pre specification. Sqm 238.0 245.14 130.5 False None None False None False 31990.77 0 3332429 116795 Volume-2-For Buildings Chapter-8-Finishing 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 136.0 140.08 578.01 False None None False None False 80967.6408 0 3332432 116795 Volume-2-For Buildings Chapter-11-Steel and Aluminium Work 11.57.2 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. kg 96.0 98.88 480.0 False None None False None False 47462.4 0 3332433 116795 Volume-2-For Buildings Chapter-8-Finishing 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 90.0 92.7 19.5 False None None False None False 1807.65 0 3332435 116795 Volume-2-For Buildings Chapter-8-Finishing 8.75.1 Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 ltr/ 10 Sqm) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 79.0 81.37 141.9 False None None False None False 11546.403 0 3332437 116795 Volume-2-For Buildings Chapter-8-Finishing 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. Sqm 62.0 63.86 236.57 False None None False None False 15107.3602 0 3332439 116795 Volume-3-For Roads And Bridges - Chapter-21-Other Items 21-C.4 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 No. 9000.0 9270.0 1.0 False None None False None False 9270.0 0 3332426 116795 None PWD SR Page No. 15 Item No.2.1.3 IR:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates Cum 5611.44 5611.44 16.31 False None None False None False 91522.5864 0 3332427 116795 None SR Vol-2 Page No.9 Item No 5.4 IR:20-10-2023 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5474.45 5474.45 81.56 False None None False None False 446496.142 0 3332430 116795 None SR Vol I1 Page No.15 Item No. 2.1.4 IR:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5790.66 5790.66 6.53 False None None False None False 37813.0098 0 3332431 116795 None SR Vol-2 Page No.13 Item No 6.6 IR:20-10-2023 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9815.9 9815.9 65.44 False None None False None False 642352.496 0 3332434 116795 None SR Vol-2 Page No.41 Item No 8.2.2 & IR Dtd:20-10-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 234.84 234.84 578.01 False None None False None False 135739.8684 0 3332436 116795 None SR Vol II Page No.82 Item No. 11.25.2 IR D:04-01-2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 121.54 121.54 150.0 False None None False None False 18231.0 0 3332438 116795 None SR Vol II Page No.94 Item No. 11.57.1 Corrigendum- Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. Mtr 15.45 15.45 1305.0 False None None False None False 20162.25 0 3332440 116795 None SR Vol-1 Page No. 15 SI No:2.1.2 IR D:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & rmwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5275.66 5275.66 6.53 False None None False None False 34450.0598 0 3332441 116795 None SR Vol-1 Page No. 15 Item No:2.1.4 IR 20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & rmwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5790.66 5790.66 6.53 False None None False None False 37813.0098 0 1719046769000 0 None None Buildings Construction of Compound under safety measures and paint to OHT is in I B premises and construction of storage room under OHT in chitradurga main road at CMC Challakere limit. 1504465.64 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3332442 116796 Volume -1-Common SR- Chapter - I- Earth Work 1.14.1 In all kinds of soils Depth upto 3 m Cum 73.0 75.19 44.44 False None None False None False 3341.4436 0 3332445 116796 Volume-2-For Buildings Chapter-21-Conservation of Heritage Buildings 21.10 Providing ruled pointing to cursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, curing complete as pre specification. Sqm 238.0 245.14 71.1 False None None False None False 17429.454 0 3332446 116796 Volume -1-Common SR- Chapter - I- Earth Work 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 204.0 210.12 37.7 False None None False None False 7921.524 0 3332448 116796 Volume-2-For Buildings Chapter-8-Finishing 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 136.0 140.08 284.72 False None None False None False 39883.5776 0 3332450 116796 Volume-2-For Buildings Chapter-8-Finishing 8.54.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Sqm 79.0 81.37 76.8 False None None False None False 6249.216 0 3332452 116796 Volume-2-For Buildings Chapter-8-Finishing 8.55.2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 40.0 41.2 76.8 False None None False None False 3164.16 0 3332455 116796 Volume-2-For Buildings Chapter-11-Steel and Aluminium Work 11.57.2 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. kg 96.0 98.88 180.0 False None None False None False 17798.4 0 3332456 116796 Volume-2-For Buildings Chapter-8-Finishing 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 90.0 92.7 32.7 False None None False None False 3031.29 0 3332459 116796 Volume-2-For Buildings Chapter-11-Steel and Aluminium Work 11.16.3 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 110.0 113.3 650.0 False None None False None False 73645.0 0 3332461 116796 Volume-2-For Buildings Chapter-8-Finishing 8.75.1 Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 ltr/ 10 Sqm) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 79.0 81.37 876.13 False None None False None False 71290.6981 0 3332463 116796 Volume-3-For Roads And Bridges - Chapter-21-Other Items 21-C.4 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 No. 9000.0 9270.0 1.0 False None None False None False 9270.0 0 3332443 116796 None PWD SR Page No. 15 Item No.2.1.3 IR:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates Cum 5611.44 5611.44 8.89 False None None False None False 49885.7016 0 3332444 116796 None SR Vol-2 Page No.9 Item No 5.4 IR:20-10-2023 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5474.45 5474.45 42.28 False None None False None False 231459.746 0 3332447 116796 None SR Vol I1 Page No.15 Item No. 2.1.4 IR:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5790.66 5790.66 3.56 False None None False None False 20614.7496 0 3332449 116796 None SR Vol -1 Page No.15 Item No. 2.2.1.1 IR:20-10-202 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth beam Cum 8944.01 8944.01 1.66 False None None False None False 14847.0566 0 3332451 116796 None SR Vol-2 Page No.84 SI No 11.32 & IR Dtd:04-01-202 Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 92.7 92.7 170.23 False None None False None False 15780.321 0 3332453 116796 None SR Vol-2 Page No.13 Item No 6.6 IR:20-10-2023 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9815.9 9815.9 37.64 False None None False None False 369470.476 0 3332454 116796 None SR Vol-2 Page No.41 Item No 8.2.2 & IR Dtd:20-10-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 234.84 234.84 361.52 False None None False None False 84899.3568 0 3332457 116796 None SR Vol II Page No.82 Item No. 11.25.2 IR D:04-01-2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 121.54 121.54 150.0 False None None False None False 18231.0 0 3332458 116796 None SR Vol II Page No.94 Item No. 11.57.1 Corrigendum- Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. Mtr 15.45 15.45 495.0 False None None False None False 7647.75 0 3332460 116796 None SR Vol II Page No.85 Item No. 11.34B Issue rate D: Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc Kg 158.62 158.62 405.0 False None None False None False 64241.1 0 3332462 116796 None SR Vol II Page No.81 Item No.7.1.1 Issue rate D:20 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² Sqm 818.85 818.85 58.1 False None None False None False 47575.185 0 3332464 116796 None SR Vol-1 Page No. 15 SI No:2.1.2 IR D:20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & rmwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5275.66 5275.66 29.53 False None None False None False 155790.2398 0 3332465 116796 None SR Vol-1 Page No. 15 Item No:2.1.4 IR 20-10-2023 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & rmwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5790.66 5790.66 29.53 False None None False None False 170998.1898 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719046769000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719046769000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719046769000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None None None None None None At least Rs 15.87 lakhs Work done certificate i.e Work done certificate should be obtained from competent authority not below the rank of Executive Engineer Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Quantity wise work done certificate as in 3.2 C of tender document. Work done certificate should be obtained from competent authority not below the rank of Executive Engineer. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Valid Firm or Contractor license Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Others -- Valid Firm Registration Certificate None None None None PAN Card and GST registration certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Others -- PAN CARD None None None None Details of work in hand through declaration Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None Annual Turnover Certificate by charted accountant including profit & loss and balance sheet achieved Rs 31.73 lakhs within 01 years last 5 years i.e 2018-19 to 2022-23 Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None ITR Filed Copy (Mentioning PAN) None None None None Line of credit Rs 9.519 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None