createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718963478147 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4860.00 emd 292000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-07-2024 16:00:00 tenderQueryClose 04-07-2024 16:00:00 technicalBidOpen 11-07-2024 16:01:00 publishedDate 24-06-2024 16:09:27 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 06-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Gnanesh Kumar V P splitEmdRequiredYn None emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9686183379 tenderSupplierList None
tenderSchedule	createdTs 1718963478176 version 6 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT509 title Pakage KLB - 1) Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. 2)Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District. 3)Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. description Pakage KLB - 1) Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. 2)Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District. 3)Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. category WORKS categoryText Works ecv 19416523.80 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 19500000.0 groupOverheadTotal 0.0 fileNumber HFW/2023-24/HWC/PakageKLB
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718963478000 0 None None Buildings 1 Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. (Civil work GF) 4113889.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328149 116588 None Vol - III, P. no. 9, it. No. 2.5.ii.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. Sq 4.86 4.86 750.0 False None None False None False 3645.0 0 3328150 116588 None Vol - I, P. no. 8, It. No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 75.0 False None None False None False 8828.25 0 3328151 116588 None Vol - I, P. no. 8, It. No. 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 126.38 126.38 221.3 False None None False None False 27967.894 0 3328152 116588 None Vol - I, P. no. 15, It. No. 2.1.3, Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 7420.37 7420.37 24.52 False None None False None False 181947.4724 0 3328153 116588 None Vol - I, P. no. 15, It. No. 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footings,Pedestal,Screed concrete over slab Cum 7789.59 7789.59 37.57 False None None False None False 292654.8963 0 3328154 116588 None Vol - I, P. no. 7, It. No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 329.57 329.57 177.04 False None None False None False 58347.0728 0 3328155 116588 None Vol - I, P. no. 7, It. No. 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 587.29 587.29 198.61 False None None False None False 116641.6669 0 3328156 116588 None Vol - II, P. no. 9, It. No. 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6952.03 6952.03 7.2 False None None False None False 50054.616 0 3328157 116588 None Vol - II, P. no. 9, It. No. 5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7688.0 7688.0 5.4 False None None False None False 41515.2 0 3328158 116588 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8478.48 8478.48 44.67 False None None False None False 378733.7016 0 3328159 116588 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Footings Pedestal Cum 623.17 623.17 29.44 False None None False None False 18346.1248 0 3328160 116588 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. COLUMNS Cum 5934.93 5934.93 9.18 False None None False None False 54482.6574 0 3328161 116588 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. PLINTH BEAM,Columns embedded in Plinth Beam Cum 4239.24 4239.24 8.86 False None None False None False 37559.6664 0 3328162 116588 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. LINTELS ROOF BEAM CONCRETE Cum 5087.09 5087.09 12.29 False None None False None False 62520.3361 0 3328163 116588 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4239.24 4239.24 14.08 False None None False None False 59688.4992 0 3328164 116588 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3815.31 3815.31 1.03 False None None False None False 3929.7693 0 3328165 116588 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cill Concrete Cum 7735.08 7735.08 1.69 False None None False None False 13072.2852 0 3328166 116588 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 110837.22 110837.22 8.55 False None None False None False 947658.231 0 3328167 116588 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor Wall - Upto Slab Beam Bottom Cum 9873.59 9873.59 37.38 False None None False None False 369074.7942 0 3328168 116588 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1209.26 1209.26 35.55 False None None False None False 42989.193 0 3328169 116588 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 122431.79 122431.79 0.45 False None None False None False 55094.3055 0 3328170 116588 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1258.82 1258.82 4.0 False None None False None False 5035.28 0 3328171 116588 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 464.63 464.63 4.0 False None None False None False 1858.52 0 3328172 116588 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 557.55 557.55 8.0 False None None False None False 4460.4 0 3328173 116588 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 185.85 185.85 4.0 False None None False None False 743.4 0 3328174 116588 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 61.95 61.95 16.0 False None None False None False 991.2 0 3328175 116588 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.15 68.15 12.0 False None None False None False 817.8 0 3328176 116588 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Each 64.43 64.43 24.0 False None None False None False 1546.32 0 3328177 116588 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Each 4115.96 4115.96 15.36 False None None False None False 63221.1456 0 3328178 116588 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8116.69 8116.69 9.84 False None None False None False 79868.2296 0 3328179 116588 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7085.84 7085.84 0.72 False None None False None False 5101.8048 0 3328180 116588 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 208.15 208.15 206.64 False None None False None False 43012.116 0 3328181 116588 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 869.78 869.78 9.8 False None None False None False 8523.844 0 3328182 116588 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4317.92 4317.92 3.15 False None None False None False 13601.448 0 3328183 116588 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 432.41 432.41 241.84 False None None False None False 104574.0344 0 3328184 116588 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 261.43 261.43 93.2 False None None False None False 24365.276 0 3328185 116588 None Vol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 123.9 123.9 335.04 False None None False None False 41511.456 0 3328186 116588 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 459.67 459.67 163.75 False None None False None False 75270.9625 0 3328187 116588 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.13 42.13 676.2 False None None False None False 28488.306 0 3328188 116588 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 64.43 64.43 271.01 False None None False None False 17461.1743 0 3328189 116588 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1418.66 1418.66 56.4 False None None False None False 80012.424 0 3328190 116588 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 345.68 345.68 67.22 False None None False None False 23236.6096 0 3328191 116588 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1101.47 1101.47 5.98 False None None False None False 6586.7906 0 3328192 116588 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1795.31 1795.31 67.22 False None None False None False 120680.7382 0 3328193 116588 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 157.35 157.35 335.04 False None None False None False 52718.544 0 3328194 116588 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 220.54 220.54 163.75 False None None False None False 36113.425 0 3328195 116588 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 62.22 False None None False None False 8865.7278 0 3328196 116588 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 49.56 49.56 25.2 False None None False None False 1248.912 0 3328197 116588 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3533.63 3533.63 51.69 False None None False None False 182653.3347 0 3328198 116588 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 700.04 700.04 234.0 False None None False None False 163809.36 0 3328199 116588 None Vol - II, P. No. 87, It. No. 11.35.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 560.03 560.03 88.2 False None None False None False 49394.646 0 3328200 116588 None LUMPSUM The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration and providing consultancy for Architectural designs & drawings, elevation, 3D view, Internal and External Electrical services including electrical infrastructure , Lifts, CCTV/Net working system interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project (This item is included in schedule B as a item) and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - - - - etc., complete with all lead and lift as per detailed specification and directions of the Engineer incharge Lump Sum for Each 43365.0 43365.0 1.0 False None None False None False 43365.0 0 1718963478000 0 None None Buildings 1 Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. (Civil work FF) 1723935.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328201 116589 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8559.22 8559.22 20.89 False None None False None False 178802.1058 0 3328202 116589 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work FIRST FLOOR COLUMNS PARAPET COLUMNS Cum 5991.46 5991.46 3.47 False None None False None False 20790.3662 0 3328203 116589 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Lintel Concrete FIRST FLOOR ROOF BEAM CONCRETE Cum 5135.53 5135.53 5.85 False None None False None False 30042.8505 0 3328204 116589 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4279.61 4279.61 18.49 False None None False None False 79129.9889 0 3328205 116589 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3851.65 3851.65 0.26 False None None False None False 1001.429 0 3328206 116589 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 7808.74 7808.74 1.69 False None None False None False 13196.7706 0 3328207 116589 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 111892.82 111892.82 2.56 False None None False None False 286445.6192 0 3328208 116589 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9967.63 9967.63 22.8 False None None False None False 227261.964 0 3328209 116589 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1220.78 1220.78 45.11 False None None False None False 55069.3858 0 3328210 116589 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 123597.8 123597.8 0.45 False None None False None False 55619.01 0 3328211 116589 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1270.81 1270.81 4.0 False None None False None False 5083.24 0 3328212 116589 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 469.05 469.05 4.0 False None None False None False 1876.2 0 3328213 116589 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 562.86 562.86 8.0 False None None False None False 4502.88 0 3328214 116589 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328215 116589 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 62.54 62.54 16.0 False None None False None False 1000.64 0 3328216 116589 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.79 68.79 12.0 False None None False None False 825.48 0 3328217 116589 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. No 65.04 65.04 24.0 False None None False None False 1560.96 0 3328218 116589 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 4155.16 4155.16 15.36 False None None False None False 63823.2576 0 3328219 116589 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8193.99 8193.99 9.6 False None None False None False 78662.304 0 3328220 116589 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7153.33 7153.33 0.72 False None None False None False 5150.3976 0 3328221 116589 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 210.13 210.13 206.64 False None None False None False 43421.2632 0 3328222 116589 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 878.06 878.06 9.8 False None None False None False 8604.988 0 3328223 116589 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4359.04 4359.04 3.15 False None None False None False 13730.976 0 3328224 116589 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 436.53 436.53 141.19 False None None False None False 61633.6707 0 3328225 116589 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 263.92 263.92 72.81 False None None False None False 19216.0152 0 3328226 116589 None ol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 125.08 125.08 214.0 False None None False None False 26767.12 0 3328227 116589 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 464.05 464.05 146.23 False None None False None False 67858.0315 0 3328228 116589 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.53 42.53 676.2 False None None False None False 28758.786 0 3328229 116589 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 65.04 65.04 271.01 False None None False None False 17626.4904 0 3328230 116589 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1432.17 1432.17 52.46 False None None False None False 75131.6382 0 3328231 116589 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 348.97 348.97 67.22 False None None False None False 23457.7634 0 3328232 116589 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1111.96 1111.96 5.98 False None None False None False 6649.5208 0 3328233 116589 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1812.41 1812.41 6.3 False None None False None False 11418.183 0 3328234 116589 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 158.85 158.85 214.0 False None None False None False 33993.9 0 3328235 116589 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 222.64 222.64 146.23 False None None False None False 32556.6472 0 3328236 116589 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.84 143.84 62.22 False None None False None False 8949.7248 0 3328237 116589 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 50.03 50.03 25.2 False None None False None False 1260.756 0 3328238 116589 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3567.28 3567.28 13.5 False None None False None False 48158.28 0 3328239 116589 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 706.7 706.7 119.07 False None None False None False 84146.769 0 1718963478000 0 None None Buildings 1 Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. (WS & Sanitary works)) 196185.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328240 116590 None V-II, P. No. 28, It. No. 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines Rmtr 113.99 113.99 4.0 False None None False None False 455.96 0 3328241 116590 None Vol - V, P. no. 120, It. No. 10.14.9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC pipe - 75mm(weight of pipe -0.917 kg) Rmtr 237.89 237.89 20.0 False None None False None False 4757.8 0 3328242 116590 None Vol - V, P. no. 120, It. No. 10.14.11 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines Rmtr 443.56 443.56 50.0 False None None False None False 22178.0 0 3328243 116590 None Vol - II, P. no. 136, It. No. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1511.58 1511.58 4.0 False None None False None False 6046.32 0 3328244 116590 None Vol - II, P. no. 123, It. No. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 7405.5 7405.5 4.0 False None None False None False 29622.0 0 3328245 116590 None Vol - II, P. no. 117, It. No. 13.3.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore Each 370.46 370.46 4.0 False None None False None False 1481.84 0 3328246 116590 None Vol - II, P. no. 132, It. No. 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3818.6 3818.6 4.0 False None None False None False 15274.4 0 3328247 116590 None Vol - II, P. No. 122, it. No. 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Rmtr 469.58 469.58 60.0 False None None False None False 28174.8 0 3328248 116590 None Vol - II, P. No. 122, It. No. 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 20 mm nominal dia Pipes Rmtr 268.86 268.86 20.0 False None None False None False 5377.2 0 3328249 116590 None Vol - II, P. No. 122, It. No. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 25 mm nominal dia Pipes Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3328250 116590 None Vol - V, P. No. 191, It. No. 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) No 6757.51 6757.51 6.0 False None None False None False 40545.06 0 3328251 116590 None Vol - II, P. no. 123, It. No. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. Ltr 11.15 11.15 2000.0 False None None False None False 22300.0 0 3328252 116590 None Vol - II, P. no. 127, It. No. 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Ground Toilet 10Cms X 7.5Cms No 272.58 272.58 6.0 False None None False None False 1635.48 0 1718963478000 0 None None Buildings 1 Construction of Health and Wellness centre at Gola (K) in Shahabad Taluka Kalaburagi District. (Electrical works) 438163.01 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328253 116591 None CSR 2023-24 It.No 2.02.01 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Pack 317.42 317.42 20.0 False None None False None False 6348.4 0 3328254 116591 None CSR 2023-24 It.No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Pack 447.22 447.22 15.0 False None None False None False 6708.3 0 3328255 116591 None CSR 2023-24 It.No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Above 6Mtr up to 10Mtr from tapping Point to out let via switch Pack 654.9 654.9 10.0 False None None False None False 6549.0 0 3328256 116591 None CSR 2023-24 It.No 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328257 116591 None CSR 2023-24 It.No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 208.86 208.86 2.0 False None None False None False 417.72 0 3328258 116591 None CSR 2023-24 It.No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3328259 116591 None CSR 2023-24 It.No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way Each 307.98 307.98 5.0 False None None False None False 1539.9 0 3328260 116591 None CSR 2023-24 It.No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 376.42 376.42 10.0 False None None False None False 3764.2 0 3328261 116591 None CSR 2023-24 It.No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 189.98 189.98 4.0 False None None False None False 759.92 0 3328262 116591 None CSR 2023-24 It.No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3328263 116591 None CSR 2023-24, It.No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 335.12 335.12 5.0 False None None False None False 1675.6 0 3328264 116591 None CSR 2023-24 It.No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 405.92 405.92 10.0 False None None False None False 4059.2 0 3328265 116591 None CSR 2023-24 It.No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Each 120.36 120.36 120.0 False None None False None False 14443.2 0 3328266 116591 None CSR 2023-24 It.No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. Each 201.78 201.78 20.0 False None None False None False 4035.6 0 3328267 116591 None CSR 2023-24, It.No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3328268 116591 None CSR 2023-24, It.No 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 212.4 212.4 20.0 False None None False None False 4248.0 0 3328269 116591 None CSR 2023-24 It.No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 4.0 False None None False None False 1538.72 0 3328270 116591 None CSR 2023-24 It.no 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 278.48 278.48 10.0 False None None False None False 2784.8 0 3328271 116591 None CSR 2023-24 It.No 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3328272 116591 None CSR 2023-24 It.No 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. No 138.06 138.06 10.0 False None None False None False 1380.6 0 3328273 116591 None CSR 2023-24 P.No 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick Rmtr 77.88 77.88 90.0 False None None False None False 7009.2 0 3328274 116591 None CSR 2023-24 It.No 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick Rmtr 92.04 92.04 150.0 False None None False None False 13806.0 0 3328275 116591 None CSR 2023-24 It.No 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2mm thick Rmtr 121.54 121.54 30.0 False None None False None False 3646.2 0 3328276 116591 None CSR 2023-24 It.No 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete Rmtr 34.22 34.22 60.0 False None None False None False 2053.2 0 3328277 116591 None CSR 2023-24 It.No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm Rmtr 30.68 30.68 180.0 False None None False None False 5522.4 0 3328278 116591 None CSR 2023-24 It.No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm Rmtr 49.56 49.56 1080.0 False None None False None False 53524.8 0 3328279 116591 None CSR 2023-24 It.No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm Rmtr 74.34 74.34 360.0 False None None False None False 26762.4 0 3328280 116591 None CSR 2023-24 It.No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure( Double Door) 12 Way SP & N Each 2198.34 2198.34 2.0 False None None False None False 4396.68 0 3328281 116591 None CSR 2023-24 It.No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3328282 116591 None CSR 2023-24 It.No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898" 6-32 A DP Each 872.02 872.02 2.0 False None None False None False 1744.04 0 3328283 116591 None 19-20SR P.No 6.4.4 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm Km 167373.56 167373.56 0.25 False None None False None False 41843.39 0 3328284 116591 None CSR 2023-24 P.No 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 814.2 814.2 20.0 False None None False None False 16284.0 0 3328285 116591 None CSR 2023-24 It.No 11.4.1 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 5-6 W, Each 949.9 949.9 6.0 False None None False None False 5699.4 0 3328286 116591 None CSR 2023-24 It.No 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 6.0 False None None False None False 10563.36 0 3328287 116591 None CSR 2023-24 It.No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 3521.12 3521.12 10.0 False None None False None False 35211.2 0 3328288 116591 None CSR 2023-24 P.No 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 143.96 143.96 20.0 False None None False None False 2879.2 0 3328289 116591 None CSR 2023-24 It.No13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3328290 116591 None CSR 2023-34 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 6.0 False None None False None False 5005.56 0 3328291 116591 None CSR 2023-34 It.No 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3328292 116591 None CSR 2023-24 IT.No 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3328293 116591 None CSR 2023-24 It.No 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 1.0 False None None False None False 191.16 0 3328294 116591 None CSR 2023-24 It.No 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG Sq CM 0.51 0.51 36000.0 False None None False None False 18360.0 0 3328295 116591 None CSR 2023-24 It.No 5.40.1 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips Rmtr 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3328296 116591 None CSR 2023-24 It.No 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm Rmtr 359.9 359.9 6.0 False None None False None False 2159.4 0 3328297 116591 None CSR 2023-24 It.No 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA Each 7181.48 7181.48 1.0 False None None False None False 7181.48 0 3328298 116591 None CSR 2023-24 It.No 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN Each 3691.92 3691.92 2.0 False None None False None False 7383.84 0 3328299 116591 None CSR 2023-24 It.N0 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3328300 116591 None CSR 2023-24 It.No 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 607.7 607.7 2.0 False None None False None False 1215.4 0 3328301 116591 None CSR 2023-24 It.No 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 663.26 663.26 3.0 False None None False None False 1989.78 0 3328302 116591 None CSR 2023-24 It.No 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10991.7 10991.7 2.0 False None None False None False 21983.4 0 3328303 116591 None LUMPSUM Electrical Deposite for Power Sanction Lump Sum for Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0 1718963478000 0 None None Buildings 2 Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District (Civil work - GF) 4113889.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328304 116592 None Vol - III, P. no. 9, it. No. 2.5.ii.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. Sq 4.86 4.86 750.0 False None None False None False 3645.0 0 3328305 116592 None Vol - I, P. no. 8, It. No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 75.0 False None None False None False 8828.25 0 3328306 116592 None Vol - I, P. no. 8, It. No. 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 126.38 126.38 221.3 False None None False None False 27967.894 0 3328307 116592 None Vol - I, P. no. 15, It. No. 2.1.3, Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 7420.37 7420.37 24.52 False None None False None False 181947.4724 0 3328308 116592 None Vol - I, P. no. 15, It. No. 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footings,Pedestal,Screed concrete over slab Cum 7789.59 7789.59 37.57 False None None False None False 292654.8963 0 3328309 116592 None Vol - I, P. no. 7, It. No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 329.57 329.57 177.04 False None None False None False 58347.0728 0 3328310 116592 None Vol - I, P. no. 7, It. No. 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 587.29 587.29 198.61 False None None False None False 116641.6669 0 3328311 116592 None Vol - II, P. no. 9, It. No. 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6952.03 6952.03 7.2 False None None False None False 50054.616 0 3328312 116592 None Vol - II, P. no. 9, It. No. 5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7688.0 7688.0 5.4 False None None False None False 41515.2 0 3328313 116592 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8478.48 8478.48 44.67 False None None False None False 378733.7016 0 3328314 116592 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Footings Pedestal Cum 623.17 623.17 29.44 False None None False None False 18346.1248 0 3328315 116592 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. COLUMNS Cum 5934.93 5934.93 9.18 False None None False None False 54482.6574 0 3328316 116592 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. PLINTH BEAM,Columns embedded in Plinth Beam Cum 4239.24 4239.24 8.86 False None None False None False 37559.6664 0 3328317 116592 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. LINTELS ROOF BEAM CONCRETE Cum 5087.09 5087.09 12.29 False None None False None False 62520.3361 0 3328318 116592 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4239.24 4239.24 14.08 False None None False None False 59688.4992 0 3328319 116592 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3815.31 3815.31 1.03 False None None False None False 3929.7693 0 3328320 116592 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cill Concrete Cum 7735.08 7735.08 1.69 False None None False None False 13072.2852 0 3328321 116592 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 110837.22 110837.22 8.55 False None None False None False 947658.231 0 3328322 116592 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor Wall - Upto Slab Beam Bottom Cum 9873.59 9873.59 37.38 False None None False None False 369074.7942 0 3328323 116592 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1209.26 1209.26 35.55 False None None False None False 42989.193 0 3328324 116592 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 122431.79 122431.79 0.45 False None None False None False 55094.3055 0 3328325 116592 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1258.82 1258.82 4.0 False None None False None False 5035.28 0 3328326 116592 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 464.63 464.63 4.0 False None None False None False 1858.52 0 3328327 116592 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 557.55 557.55 8.0 False None None False None False 4460.4 0 3328328 116592 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 185.85 185.85 4.0 False None None False None False 743.4 0 3328329 116592 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 61.95 61.95 16.0 False None None False None False 991.2 0 3328330 116592 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.15 68.15 12.0 False None None False None False 817.8 0 3328331 116592 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Each 64.43 64.43 24.0 False None None False None False 1546.32 0 3328332 116592 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Each 4115.96 4115.96 15.36 False None None False None False 63221.1456 0 3328333 116592 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8116.69 8116.69 9.84 False None None False None False 79868.2296 0 3328334 116592 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7085.84 7085.84 0.72 False None None False None False 5101.8048 0 3328335 116592 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 208.15 208.15 206.64 False None None False None False 43012.116 0 3328336 116592 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 869.78 869.78 9.8 False None None False None False 8523.844 0 3328337 116592 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4317.92 4317.92 3.15 False None None False None False 13601.448 0 3328338 116592 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 432.41 432.41 241.84 False None None False None False 104574.0344 0 3328339 116592 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 261.43 261.43 93.2 False None None False None False 24365.276 0 3328340 116592 None Vol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 123.9 123.9 335.04 False None None False None False 41511.456 0 3328341 116592 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 459.67 459.67 163.75 False None None False None False 75270.9625 0 3328342 116592 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.13 42.13 676.2 False None None False None False 28488.306 0 3328343 116592 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 64.43 64.43 271.01 False None None False None False 17461.1743 0 3328344 116592 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1418.66 1418.66 56.4 False None None False None False 80012.424 0 3328345 116592 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 345.68 345.68 67.22 False None None False None False 23236.6096 0 3328346 116592 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1101.47 1101.47 5.98 False None None False None False 6586.7906 0 3328347 116592 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1795.31 1795.31 67.22 False None None False None False 120680.7382 0 3328348 116592 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 157.35 157.35 335.04 False None None False None False 52718.544 0 3328349 116592 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 220.54 220.54 163.75 False None None False None False 36113.425 0 3328350 116592 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 62.22 False None None False None False 8865.7278 0 3328351 116592 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 49.56 49.56 25.2 False None None False None False 1248.912 0 3328352 116592 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3533.63 3533.63 51.69 False None None False None False 182653.3347 0 3328353 116592 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 700.04 700.04 234.0 False None None False None False 163809.36 0 3328354 116592 None Vol - II, P. No. 87, It. No. 11.35.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 560.03 560.03 88.2 False None None False None False 49394.646 0 3328355 116592 None LUMPSUM The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration and providing consultancy for Architectural designs & drawings, elevation, 3D view, Internal and External Electrical services including electrical infrastructure , Lifts, CCTV/Net working system interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project (This item is included in schedule B as a item) and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - - - - etc., complete with all lead and lift as per detailed specification and directions of the Engineer incharge Lump Sum for Each 43365.0 43365.0 1.0 False None None False None False 43365.0 0 1718963478000 0 None None Buildings 2 Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District (Civil work - FF) 1723935.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328356 116593 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8559.22 8559.22 20.89 False None None False None False 178802.1058 0 3328357 116593 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work FIRST FLOOR COLUMNS PARAPET COLUMNS Cum 5991.46 5991.46 3.47 False None None False None False 20790.3662 0 3328358 116593 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Lintel Concrete FIRST FLOOR ROOF BEAM CONCRETE Cum 5135.53 5135.53 5.85 False None None False None False 30042.8505 0 3328359 116593 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4279.61 4279.61 18.49 False None None False None False 79129.9889 0 3328360 116593 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3851.65 3851.65 0.26 False None None False None False 1001.429 0 3328361 116593 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 7808.74 7808.74 1.69 False None None False None False 13196.7706 0 3328362 116593 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 111892.82 111892.82 2.56 False None None False None False 286445.6192 0 3328363 116593 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9967.63 9967.63 22.8 False None None False None False 227261.964 0 3328364 116593 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1220.78 1220.78 45.11 False None None False None False 55069.3858 0 3328365 116593 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 123597.8 123597.8 0.45 False None None False None False 55619.01 0 3328366 116593 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1270.81 1270.81 4.0 False None None False None False 5083.24 0 3328367 116593 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 469.05 469.05 4.0 False None None False None False 1876.2 0 3328368 116593 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 562.86 562.86 8.0 False None None False None False 4502.88 0 3328369 116593 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328370 116593 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 62.54 62.54 16.0 False None None False None False 1000.64 0 3328371 116593 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.79 68.79 12.0 False None None False None False 825.48 0 3328372 116593 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. No 65.04 65.04 24.0 False None None False None False 1560.96 0 3328373 116593 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 4155.16 4155.16 15.36 False None None False None False 63823.2576 0 3328374 116593 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8193.99 8193.99 9.6 False None None False None False 78662.304 0 3328375 116593 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7153.33 7153.33 0.72 False None None False None False 5150.3976 0 3328376 116593 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 210.13 210.13 206.64 False None None False None False 43421.2632 0 3328377 116593 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 878.06 878.06 9.8 False None None False None False 8604.988 0 3328378 116593 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4359.04 4359.04 3.15 False None None False None False 13730.976 0 3328379 116593 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 436.53 436.53 141.19 False None None False None False 61633.6707 0 3328380 116593 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 263.92 263.92 72.81 False None None False None False 19216.0152 0 3328381 116593 None ol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 125.08 125.08 214.0 False None None False None False 26767.12 0 3328382 116593 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 464.05 464.05 146.23 False None None False None False 67858.0315 0 3328383 116593 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.53 42.53 676.2 False None None False None False 28758.786 0 3328384 116593 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 65.04 65.04 271.01 False None None False None False 17626.4904 0 3328385 116593 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1432.17 1432.17 52.46 False None None False None False 75131.6382 0 3328386 116593 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 348.97 348.97 67.22 False None None False None False 23457.7634 0 3328387 116593 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1111.96 1111.96 5.98 False None None False None False 6649.5208 0 3328388 116593 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1812.41 1812.41 6.3 False None None False None False 11418.183 0 3328389 116593 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 158.85 158.85 214.0 False None None False None False 33993.9 0 3328390 116593 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 222.64 222.64 146.23 False None None False None False 32556.6472 0 3328391 116593 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.84 143.84 62.22 False None None False None False 8949.7248 0 3328392 116593 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 50.03 50.03 25.2 False None None False None False 1260.756 0 3328393 116593 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3567.28 3567.28 13.5 False None None False None False 48158.28 0 3328394 116593 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 706.7 706.7 119.07 False None None False None False 84146.769 0 1718963478000 0 None None Buildings 2 Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District (WS & Sanitary works) 196185.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328395 116594 None V-II, P. No. 28, It. No. 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines Rmtr 113.99 113.99 4.0 False None None False None False 455.96 0 3328396 116594 None Vol - V, P. no. 120, It. No. 10.14.9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC pipe - 75mm(weight of pipe -0.917 kg) Rmtr 237.89 237.89 20.0 False None None False None False 4757.8 0 3328397 116594 None Vol - V, P. no. 120, It. No. 10.14.11 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines Rmtr 443.56 443.56 50.0 False None None False None False 22178.0 0 3328398 116594 None Vol - II, P. no. 136, It. No. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1511.58 1511.58 4.0 False None None False None False 6046.32 0 3328399 116594 None Vol - II, P. no. 123, It. No. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 7405.5 7405.5 4.0 False None None False None False 29622.0 0 3328400 116594 None Vol - II, P. no. 117, It. No. 13.3.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore Each 370.46 370.46 4.0 False None None False None False 1481.84 0 3328401 116594 None Vol - II, P. no. 132, It. No. 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3818.6 3818.6 4.0 False None None False None False 15274.4 0 3328402 116594 None Vol - II, P. No. 122, it. No. 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Rmtr 469.58 469.58 60.0 False None None False None False 28174.8 0 3328403 116594 None Vol - II, P. No. 122, It. No. 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 20 mm nominal dia Pipes Rmtr 268.86 268.86 20.0 False None None False None False 5377.2 0 3328404 116594 None Vol - II, P. No. 122, It. No. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 25 mm nominal dia Pipes Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3328405 116594 None Vol - V, P. No. 191, It. No. 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) No 6757.51 6757.51 6.0 False None None False None False 40545.06 0 3328406 116594 None Vol - II, P. no. 123, It. No. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. Ltr 11.15 11.15 2000.0 False None None False None False 22300.0 0 3328407 116594 None Vol - II, P. no. 127, It. No. 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Ground Toilet 10Cms X 7.5Cms No 272.58 272.58 6.0 False None None False None False 1635.48 0 1718963478000 0 None None Buildings 2 Construction of Health and Wellness centre at Ladmugali in Aland Taluka Kalaburagi District (Electrical works) 438163.01 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328408 116595 None CSR 2023-24 It.No 2.02.01 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Pack 317.42 317.42 20.0 False None None False None False 6348.4 0 3328409 116595 None CSR 2023-24 It.No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Pack 447.22 447.22 15.0 False None None False None False 6708.3 0 3328410 116595 None CSR 2023-24 It.No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Above 6Mtr up to 10Mtr from tapping Point to out let via switch Pack 654.9 654.9 10.0 False None None False None False 6549.0 0 3328411 116595 None CSR 2023-24 It.No 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328412 116595 None CSR 2023-24 It.No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 208.86 208.86 2.0 False None None False None False 417.72 0 3328413 116595 None CSR 2023-24 It.No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3328414 116595 None CSR 2023-24 It.No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way Each 307.98 307.98 5.0 False None None False None False 1539.9 0 3328415 116595 None CSR 2023-24 It.No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 376.42 376.42 10.0 False None None False None False 3764.2 0 3328416 116595 None CSR 2023-24 It.No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 189.98 189.98 4.0 False None None False None False 759.92 0 3328417 116595 None CSR 2023-24 It.No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3328418 116595 None CSR 2023-24, It.No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 335.12 335.12 5.0 False None None False None False 1675.6 0 3328419 116595 None CSR 2023-24 It.No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 405.92 405.92 10.0 False None None False None False 4059.2 0 3328420 116595 None CSR 2023-24 It.No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Each 120.36 120.36 120.0 False None None False None False 14443.2 0 3328421 116595 None CSR 2023-24 It.No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. Each 201.78 201.78 20.0 False None None False None False 4035.6 0 3328422 116595 None CSR 2023-24, It.No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3328423 116595 None CSR 2023-24, It.No 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 212.4 212.4 20.0 False None None False None False 4248.0 0 3328424 116595 None CSR 2023-24 It.No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 4.0 False None None False None False 1538.72 0 3328425 116595 None CSR 2023-24 It.no 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 278.48 278.48 10.0 False None None False None False 2784.8 0 3328426 116595 None CSR 2023-24 It.No 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3328427 116595 None CSR 2023-24 It.No 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. No 138.06 138.06 10.0 False None None False None False 1380.6 0 3328428 116595 None CSR 2023-24 P.No 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick Rmtr 77.88 77.88 90.0 False None None False None False 7009.2 0 3328429 116595 None CSR 2023-24 It.No 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick Rmtr 92.04 92.04 150.0 False None None False None False 13806.0 0 3328430 116595 None CSR 2023-24 It.No 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2mm thick Rmtr 121.54 121.54 30.0 False None None False None False 3646.2 0 3328431 116595 None CSR 2023-24 It.No 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete Rmtr 34.22 34.22 60.0 False None None False None False 2053.2 0 3328432 116595 None CSR 2023-24 It.No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm Rmtr 30.68 30.68 180.0 False None None False None False 5522.4 0 3328433 116595 None CSR 2023-24 It.No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm Rmtr 49.56 49.56 1080.0 False None None False None False 53524.8 0 3328434 116595 None CSR 2023-24 It.No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm Rmtr 74.34 74.34 360.0 False None None False None False 26762.4 0 3328435 116595 None CSR 2023-24 It.No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure( Double Door) 12 Way SP & N Each 2198.34 2198.34 2.0 False None None False None False 4396.68 0 3328436 116595 None CSR 2023-24 It.No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3328437 116595 None CSR 2023-24 It.No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898" 6-32 A DP Each 872.02 872.02 2.0 False None None False None False 1744.04 0 3328438 116595 None 19-20SR P.No 6.4.4 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm Km 167373.56 167373.56 0.25 False None None False None False 41843.39 0 3328439 116595 None CSR 2023-24 P.No 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 814.2 814.2 20.0 False None None False None False 16284.0 0 3328440 116595 None CSR 2023-24 It.No 11.4.1 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 5-6 W, Each 949.9 949.9 6.0 False None None False None False 5699.4 0 3328441 116595 None CSR 2023-24 It.No 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 6.0 False None None False None False 10563.36 0 3328442 116595 None CSR 2023-24 It.No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 3521.12 3521.12 10.0 False None None False None False 35211.2 0 3328443 116595 None CSR 2023-24 P.No 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 143.96 143.96 20.0 False None None False None False 2879.2 0 3328444 116595 None CSR 2023-24 It.No13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3328445 116595 None CSR 2023-34 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 6.0 False None None False None False 5005.56 0 3328446 116595 None CSR 2023-34 It.No 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3328447 116595 None CSR 2023-24 IT.No 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3328448 116595 None CSR 2023-24 It.No 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 1.0 False None None False None False 191.16 0 3328449 116595 None CSR 2023-24 It.No 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG Sq CM 0.51 0.51 36000.0 False None None False None False 18360.0 0 3328450 116595 None CSR 2023-24 It.No 5.40.1 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips Rmtr 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3328451 116595 None CSR 2023-24 It.No 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm Rmtr 359.9 359.9 6.0 False None None False None False 2159.4 0 3328452 116595 None CSR 2023-24 It.No 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA Each 7181.48 7181.48 1.0 False None None False None False 7181.48 0 3328453 116595 None CSR 2023-24 It.No 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN Each 3691.92 3691.92 2.0 False None None False None False 7383.84 0 3328454 116595 None CSR 2023-24 It.N0 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3328455 116595 None CSR 2023-24 It.No 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 607.7 607.7 2.0 False None None False None False 1215.4 0 3328456 116595 None CSR 2023-24 It.No 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 663.26 663.26 3.0 False None None False None False 1989.78 0 3328457 116595 None CSR 2023-24 It.No 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10991.7 10991.7 2.0 False None None False None False 21983.4 0 3328458 116595 None LUMPSUM Electrical Deposite for Power Sanction Lump Sum for Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0 1718963478000 0 None None Buildings 3 Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. (Civil work - GF) 4113889.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328459 116596 None Vol - III, P. no. 9, it. No. 2.5.ii.a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. Sq 4.86 4.86 750.0 False None None False None False 3645.0 0 3328460 116596 None Vol - I, P. no. 8, It. No. 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 117.71 117.71 75.0 False None None False None False 8828.25 0 3328461 116596 None Vol - I, P. no. 8, It. No. 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 126.38 126.38 221.3 False None None False None False 27967.894 0 3328462 116596 None Vol - I, P. no. 15, It. No. 2.1.3, Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 7420.37 7420.37 24.52 False None None False None False 181947.4724 0 3328463 116596 None Vol - I, P. no. 15, It. No. 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footings,Pedestal,Screed concrete over slab Cum 7789.59 7789.59 37.57 False None None False None False 292654.8963 0 3328464 116596 None Vol - I, P. no. 7, It. No. 1.9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 329.57 329.57 177.04 False None None False None False 58347.0728 0 3328465 116596 None Vol - I, P. no. 7, It. No. 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 587.29 587.29 198.61 False None None False None False 116641.6669 0 3328466 116596 None Vol - II, P. no. 9, It. No. 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6952.03 6952.03 7.2 False None None False None False 50054.616 0 3328467 116596 None Vol - II, P. no. 9, It. No. 5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7688.0 7688.0 5.4 False None None False None False 41515.2 0 3328468 116596 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8478.48 8478.48 44.67 False None None False None False 378733.7016 0 3328469 116596 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Footings Pedestal Cum 623.17 623.17 29.44 False None None False None False 18346.1248 0 3328470 116596 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. COLUMNS Cum 5934.93 5934.93 9.18 False None None False None False 54482.6574 0 3328471 116596 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. PLINTH BEAM,Columns embedded in Plinth Beam Cum 4239.24 4239.24 8.86 False None None False None False 37559.6664 0 3328472 116596 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. LINTELS ROOF BEAM CONCRETE Cum 5087.09 5087.09 12.29 False None None False None False 62520.3361 0 3328473 116596 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4239.24 4239.24 14.08 False None None False None False 59688.4992 0 3328474 116596 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3815.31 3815.31 1.03 False None None False None False 3929.7693 0 3328475 116596 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cill Concrete Cum 7735.08 7735.08 1.69 False None None False None False 13072.2852 0 3328476 116596 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 110837.22 110837.22 8.55 False None None False None False 947658.231 0 3328477 116596 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Ground Floor Wall - Upto Slab Beam Bottom Cum 9873.59 9873.59 37.38 False None None False None False 369074.7942 0 3328478 116596 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1209.26 1209.26 35.55 False None None False None False 42989.193 0 3328479 116596 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 122431.79 122431.79 0.45 False None None False None False 55094.3055 0 3328480 116596 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1258.82 1258.82 4.0 False None None False None False 5035.28 0 3328481 116596 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 464.63 464.63 4.0 False None None False None False 1858.52 0 3328482 116596 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 557.55 557.55 8.0 False None None False None False 4460.4 0 3328483 116596 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 185.85 185.85 4.0 False None None False None False 743.4 0 3328484 116596 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 61.95 61.95 16.0 False None None False None False 991.2 0 3328485 116596 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.15 68.15 12.0 False None None False None False 817.8 0 3328486 116596 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. Each 64.43 64.43 24.0 False None None False None False 1546.32 0 3328487 116596 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Each 4115.96 4115.96 15.36 False None None False None False 63221.1456 0 3328488 116596 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8116.69 8116.69 9.84 False None None False None False 79868.2296 0 3328489 116596 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7085.84 7085.84 0.72 False None None False None False 5101.8048 0 3328490 116596 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 208.15 208.15 206.64 False None None False None False 43012.116 0 3328491 116596 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 869.78 869.78 9.8 False None None False None False 8523.844 0 3328492 116596 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4317.92 4317.92 3.15 False None None False None False 13601.448 0 3328493 116596 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 432.41 432.41 241.84 False None None False None False 104574.0344 0 3328494 116596 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 261.43 261.43 93.2 False None None False None False 24365.276 0 3328495 116596 None Vol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 123.9 123.9 335.04 False None None False None False 41511.456 0 3328496 116596 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 459.67 459.67 163.75 False None None False None False 75270.9625 0 3328497 116596 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.13 42.13 676.2 False None None False None False 28488.306 0 3328498 116596 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 64.43 64.43 271.01 False None None False None False 17461.1743 0 3328499 116596 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1418.66 1418.66 56.4 False None None False None False 80012.424 0 3328500 116596 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 345.68 345.68 67.22 False None None False None False 23236.6096 0 3328501 116596 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1101.47 1101.47 5.98 False None None False None False 6586.7906 0 3328502 116596 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1795.31 1795.31 67.22 False None None False None False 120680.7382 0 3328503 116596 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 157.35 157.35 335.04 False None None False None False 52718.544 0 3328504 116596 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 220.54 220.54 163.75 False None None False None False 36113.425 0 3328505 116596 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 142.49 142.49 62.22 False None None False None False 8865.7278 0 3328506 116596 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 49.56 49.56 25.2 False None None False None False 1248.912 0 3328507 116596 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3533.63 3533.63 51.69 False None None False None False 182653.3347 0 3328508 116596 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 700.04 700.04 234.0 False None None False None False 163809.36 0 3328509 116596 None Vol - II, P. No. 87, It. No. 11.35.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 560.03 560.03 88.2 False None None False None False 49394.646 0 3328510 116596 None LUMPSUM The Tenderer (agency) should arrange to obtain (get), detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration and providing consultancy for Architectural designs & drawings, elevation, 3D view, Internal and External Electrical services including electrical infrastructure , Lifts, CCTV/Net working system interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project (This item is included in schedule B as a item) and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - - - - etc., complete with all lead and lift as per detailed specification and directions of the Engineer incharge Lump Sum for Each 43365.0 43365.0 1.0 False None None False None False 43365.0 0 1718963478000 0 None None Buildings 3 Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. (Civil work - FF) 1723935.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328511 116597 None Vol - I, P. no. 16, It. No. 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8559.22 8559.22 20.89 False None None False None False 178802.1058 0 3328512 116597 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work FIRST FLOOR COLUMNS PARAPET COLUMNS Cum 5991.46 5991.46 3.47 False None None False None False 20790.3662 0 3328513 116597 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Lintel Concrete FIRST FLOOR ROOF BEAM CONCRETE Cum 5135.53 5135.53 5.85 False None None False None False 30042.8505 0 3328514 116597 None Vol - I, P. no. 111, Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. ROOF SLAB Cum 4279.61 4279.61 18.49 False None None False None False 79129.9889 0 3328515 116597 None Vol - I, P. no. 111 Appendix I-Additionalities for Formwork, Centering & Scaffolding - Including cost of all materials, labours, HOM, I & UL, Curing with all lead and lifts etc. complete as per specifications and as directed by engineer-in-charge of the work. Chajja Cum 3851.65 3851.65 0.26 False None None False None False 1001.429 0 3328516 116597 None Vol - I, P. no. 15, It. No. 2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 7808.74 7808.74 1.69 False None None False None False 13196.7706 0 3328517 116597 None Vol - 1, P. no.18, It. No. 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 111892.82 111892.82 2.56 False None None False None False 286445.6192 0 3328518 116597 None Vol - II, P. No. 14, It. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 9967.63 9967.63 22.8 False None None False None False 227261.964 0 3328519 116597 None Vol - II, P. No. 14, It. No. 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1220.78 1220.78 45.11 False None None False None False 55069.3858 0 3328520 116597 None Vol - II, P. No. 100, It. No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 123597.8 123597.8 0.45 False None None False None False 55619.01 0 3328521 116597 None Vol - II, P. No. 104, It. No. 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Each 1270.81 1270.81 4.0 False None None False None False 5083.24 0 3328522 116597 None Vol - II, P. No. 219, It. No. 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Aldrop 16mm dia, 300mm Each 469.05 469.05 4.0 False None None False None False 1876.2 0 3328523 116597 None Vol - II, P. No. 219, It. No. 22.15.1 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Handles 200mm Each 562.86 562.86 8.0 False None None False None False 4502.88 0 3328524 116597 None Vol - II, P. No. 219, It. No. 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS Tower Bolts 200x10mm Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328525 116597 None Vol - II, P. No. 219, It. No. 22.15.8 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - SS hinges 125 mm Each 62.54 62.54 16.0 False None None False None False 1000.64 0 3328526 116597 None Vol - II, P. No. 69, It. No. 10.6.2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 68.79 68.79 12.0 False None None False None False 825.48 0 3328527 116597 None Vol - II, P. No. 205, It. No. 20.79 Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. No 65.04 65.04 24.0 False None None False None False 1560.96 0 3328528 116597 None Vol - II, P. No. 105, It. No. 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial Sqm 4155.16 4155.16 15.36 False None None False None False 63823.2576 0 3328529 116597 None Vol - II, P. No. 110, It. No. 12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 8193.99 8193.99 9.6 False None None False None False 78662.304 0 3328530 116597 None Vol - II, P. No. 109, It. No. 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7153.33 7153.33 0.72 False None None False None False 5150.3976 0 3328531 116597 None Vol - II, P. No. 85, It. No. 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 210.13 210.13 206.64 False None None False None False 43421.2632 0 3328532 116597 None Vol - II, P. No. 111, It. No. 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) - Size 62 x 100mm Rmtr 878.06 878.06 9.8 False None None False None False 8604.988 0 3328533 116597 None Vol - II, P. No. 112, It. No. 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) - 30 mm thickness Cum 4359.04 4359.04 3.15 False None None False None False 13730.976 0 3328534 116597 None Vol - II, P. No. 42, It. No. 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 436.53 436.53 141.19 False None None False None False 61633.6707 0 3328535 116597 None Vol - II, P. No. 43, It. No. 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 263.92 263.92 72.81 False None None False None False 19216.0152 0 3328536 116597 None ol - II, P. No. 50, It. No. 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 125.08 125.08 214.0 False None None False None False 26767.12 0 3328537 116597 None Vol - II, P. No. 42, It. No. 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (outside) Sqm 464.05 464.05 146.23 False None None False None False 67858.0315 0 3328538 116597 None Vol - II, P. No. 43, It. No. 8.16.1 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Sqm 42.53 42.53 676.2 False None None False None False 28758.786 0 3328539 116597 None Vol - II, P. No. 54, It. No. 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. Rmtr 65.04 65.04 271.01 False None None False None False 17626.4904 0 3328540 116597 None Vol - II, P. No. 60, It. No. 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Sqm 1432.17 1432.17 52.46 False None None False None False 75131.6382 0 3328541 116597 None Vol - II, P. No. 40, It. No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 348.97 348.97 67.22 False None None False None False 23457.7634 0 3328542 116597 None Vol - II, P. No. 60, It. No. 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1111.96 1111.96 5.98 False None None False None False 6649.5208 0 3328543 116597 None Vol - II, P. No. 64, It. No. 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1812.41 1812.41 6.3 False None None False None False 11418.183 0 3328544 116597 None Vol - II, P. No. 48, It. No. 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 158.85 158.85 214.0 False None None False None False 33993.9 0 3328545 116597 None Vol - II, P. No. 46, It. No. 8.31 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 222.64 222.64 146.23 False None None False None False 32556.6472 0 3328546 116597 None Vol - II, P. No. 48, It. No. 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.84 143.84 62.22 False None None False None False 8949.7248 0 3328547 116597 None Vol - II, P. No. 48, It. No. 8.38 Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 50.03 50.03 25.2 False None None False None False 1260.756 0 3328548 116597 None Vol - II, P. No. 48, It. No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. Sqm 3567.28 3567.28 13.5 False None None False None False 48158.28 0 3328549 116597 None Vol - II, P. No. 48, It. No. 9.24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 706.7 706.7 119.07 False None None False None False 84146.769 0 1718963478000 0 None None Buildings 3 Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. (WS & Sanitary works) 196185.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328550 116598 None V-II, P. No. 28, It. No. 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines Rmtr 113.99 113.99 4.0 False None None False None False 455.96 0 3328551 116598 None Vol - V, P. no. 120, It. No. 10.14.9 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. PVC pipe - 75mm(weight of pipe -0.917 kg) Rmtr 237.89 237.89 20.0 False None None False None False 4757.8 0 3328552 116598 None Vol - V, P. no. 120, It. No. 10.14.11 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines Rmtr 443.56 443.56 50.0 False None None False None False 22178.0 0 3328553 116598 None Vol - II, P. no. 136, It. No. 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. No 1511.58 1511.58 4.0 False None None False None False 6046.32 0 3328554 116598 None Vol - II, P. no. 123, It. No. 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 7405.5 7405.5 4.0 False None None False None False 29622.0 0 3328555 116598 None Vol - II, P. no. 117, It. No. 13.3.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore Each 370.46 370.46 4.0 False None None False None False 1481.84 0 3328556 116598 None Vol - II, P. no. 132, It. No. 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps Each 3818.6 3818.6 4.0 False None None False None False 15274.4 0 3328557 116598 None Vol - II, P. No. 122, it. No. 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Rmtr 469.58 469.58 60.0 False None None False None False 28174.8 0 3328558 116598 None Vol - II, P. No. 122, It. No. 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 20 mm nominal dia Pipes Rmtr 268.86 268.86 20.0 False None None False None False 5377.2 0 3328559 116598 None Vol - II, P. No. 122, It. No. 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 25 mm nominal dia Pipes Rmtr 366.74 366.74 50.0 False None None False None False 18337.0 0 3328560 116598 None Vol - V, P. No. 191, It. No. 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(CATCH BASIN) No 6757.51 6757.51 6.0 False None None False None False 40545.06 0 3328561 116598 None Vol - II, P. no. 123, It. No. 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. Ltr 11.15 11.15 2000.0 False None None False None False 22300.0 0 3328562 116598 None Vol - II, P. no. 127, It. No. 13.59 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Ground Toilet 10Cms X 7.5Cms No 272.58 272.58 6.0 False None None False None False 1635.48 0 1718963478000 0 None None Buildings 3 Construction of Health and Wellness centre at Road Kinni/Kinnisadak in Aland Taluka Kalaburagi District. (Electrical works) 438163.01 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3328563 116599 None CSR 2023-24 It.No 2.02.01 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch Pack 317.42 317.42 20.0 False None None False None False 6348.4 0 3328564 116599 None CSR 2023-24 It.No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Pack 447.22 447.22 15.0 False None None False None False 6708.3 0 3328565 116599 None CSR 2023-24 It.No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Above 6Mtr up to 10Mtr from tapping Point to out let via switch Pack 654.9 654.9 10.0 False None None False None False 6549.0 0 3328566 116599 None CSR 2023-24 It.No 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall Each 187.62 187.62 4.0 False None None False None False 750.48 0 3328567 116599 None CSR 2023-24 It.No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 208.86 208.86 2.0 False None None False None False 417.72 0 3328568 116599 None CSR 2023-24 It.No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 259.6 259.6 10.0 False None None False None False 2596.0 0 3328569 116599 None CSR 2023-24 It.No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way Each 307.98 307.98 5.0 False None None False None False 1539.9 0 3328570 116599 None CSR 2023-24 It.No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 376.42 376.42 10.0 False None None False None False 3764.2 0 3328571 116599 None CSR 2023-24 It.No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 189.98 189.98 4.0 False None None False None False 759.92 0 3328572 116599 None CSR 2023-24 It.No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 276.12 276.12 10.0 False None None False None False 2761.2 0 3328573 116599 None CSR 2023-24, It.No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 335.12 335.12 5.0 False None None False None False 1675.6 0 3328574 116599 None CSR 2023-24 It.No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 405.92 405.92 10.0 False None None False None False 4059.2 0 3328575 116599 None CSR 2023-24 It.No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Each 120.36 120.36 120.0 False None None False None False 14443.2 0 3328576 116599 None CSR 2023-24 It.No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. Each 201.78 201.78 20.0 False None None False None False 4035.6 0 3328577 116599 None CSR 2023-24, It.No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3328578 116599 None CSR 2023-24, It.No 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 212.4 212.4 20.0 False None None False None False 4248.0 0 3328579 116599 None CSR 2023-24 It.No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 384.68 384.68 4.0 False None None False None False 1538.72 0 3328580 116599 None CSR 2023-24 It.no 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 278.48 278.48 10.0 False None None False None False 2784.8 0 3328581 116599 None CSR 2023-24 It.No 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket Each 184.08 184.08 2.0 False None None False None False 368.16 0 3328582 116599 None CSR 2023-24 It.No 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. No 138.06 138.06 10.0 False None None False None False 1380.6 0 3328583 116599 None CSR 2023-24 P.No 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick Rmtr 77.88 77.88 90.0 False None None False None False 7009.2 0 3328584 116599 None CSR 2023-24 It.No 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick Rmtr 92.04 92.04 150.0 False None None False None False 13806.0 0 3328585 116599 None CSR 2023-24 It.No 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 32mm dia 2mm thick Rmtr 121.54 121.54 30.0 False None None False None False 3646.2 0 3328586 116599 None CSR 2023-24 It.No 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete Rmtr 34.22 34.22 60.0 False None None False None False 2053.2 0 3328587 116599 None CSR 2023-24 It.No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm Rmtr 30.68 30.68 180.0 False None None False None False 5522.4 0 3328588 116599 None CSR 2023-24 It.No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm Rmtr 49.56 49.56 1080.0 False None None False None False 53524.8 0 3328589 116599 None CSR 2023-24 It.No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm Rmtr 74.34 74.34 360.0 False None None False None False 26762.4 0 3328590 116599 None CSR 2023-24 It.No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure( Double Door) 12 Way SP & N Each 2198.34 2198.34 2.0 False None None False None False 4396.68 0 3328591 116599 None CSR 2023-24 It.No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3328592 116599 None CSR 2023-24 It.No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898" 6-32 A DP Each 872.02 872.02 2.0 False None None False None False 1744.04 0 3328593 116599 None 19-20SR P.No 6.4.4 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmm Km 167373.56 167373.56 0.25 False None None False None False 41843.39 0 3328594 116599 None CSR 2023-24 P.No 11.3.2 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. Each 814.2 814.2 20.0 False None None False None False 16284.0 0 3328595 116599 None CSR 2023-24 It.No 11.4.1 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 5-6 W, Each 949.9 949.9 6.0 False None None False None False 5699.4 0 3328596 116599 None CSR 2023-24 It.No 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Each 1760.56 1760.56 6.0 False None None False None False 10563.36 0 3328597 116599 None CSR 2023-24 It.No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 3521.12 3521.12 10.0 False None None False None False 35211.2 0 3328598 116599 None CSR 2023-24 P.No 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders Each 143.96 143.96 20.0 False None None False None False 2879.2 0 3328599 116599 None CSR 2023-24 It.No13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 201.78 201.78 10.0 False None None False None False 2017.8 0 3328600 116599 None CSR 2023-34 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 6.0 False None None False None False 5005.56 0 3328601 116599 None CSR 2023-34 It.No 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3328602 116599 None CSR 2023-24 IT.No 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3328603 116599 None CSR 2023-24 It.No 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 191.16 191.16 1.0 False None None False None False 191.16 0 3328604 116599 None CSR 2023-24 It.No 5.42.2 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG Sq CM 0.51 0.51 36000.0 False None None False None False 18360.0 0 3328605 116599 None CSR 2023-24 It.No 5.40.1 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips Rmtr 2908.7 2908.7 2.0 False None None False None False 5817.4 0 3328606 116599 None CSR 2023-24 It.No 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm Rmtr 359.9 359.9 6.0 False None None False None False 2159.4 0 3328607 116599 None CSR 2023-24 It.No 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA Each 7181.48 7181.48 1.0 False None None False None False 7181.48 0 3328608 116599 None CSR 2023-24 It.No 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN Each 3691.92 3691.92 2.0 False None None False None False 7383.84 0 3328609 116599 None CSR 2023-24 It.N0 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP Each 872.02 872.02 6.0 False None None False None False 5232.12 0 3328610 116599 None CSR 2023-24 It.No 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C Each 607.7 607.7 2.0 False None None False None False 1215.4 0 3328611 116599 None CSR 2023-24 It.No 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound Each 663.26 663.26 3.0 False None None False None False 1989.78 0 3328612 116599 None CSR 2023-24 It.No 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 10991.7 10991.7 2.0 False None None False None False 21983.4 0 3328613 116599 None LUMPSUM Electrical Deposite for Power Sanction Lump Sum for Each 35000.0 35000.0 1.0 False None None False None False 35000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718963479000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718963479000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1718963479000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1718963479000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1718963479000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718963495000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1718963507000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1718963513000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1718963520000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1718963525000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1718963530000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1718963536000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1718963541000 0 None None ELIGIBILITY All the formats prescribed in the bid documents shall be filled in complete manner. (section 2 & 3 of the bid document) and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1718963547000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1718963552000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1718963557000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract Help Desk for more assistance Phone: 080-25501216/ 25501227) None 1718963563000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoide damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1718963569000 0 None None ELIGIBILITY Materials like, steel(primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1718963574000 0 None None ELIGIBILITY Special Instructions to tenderers - asper bid document (F. Special Conditions of Contract Clause-6) None 1718963582000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1718963588000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24. None 1718963593000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within weeks time from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None 1718963604000 0 None None ELIGIBILITY Tenderer should have latest GST registration & upload latest GST/VAT clearance certificate in their name None 1718963612000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be Inclusive of GST None 1718963620000 0 None None ELIGIBILITY The contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2aTo qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.388.34 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause ITT 3.2bTo qualify for award of this contract,each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24)The tenderer should have been Satisfactorily completed at least one Similar work of value not less than Rs.97.10 Lakhs as prime contractor. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(c): To qualify for award of this contract,each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24).Executed in any one financial year,the following minimum quantities of work Sl.No Description of key items of works 1. Earthwork Excavation in all kinds of soil 1188.00 Cum 2.PCC & RCC 314.00 Cum 3. Steel Reinforcement for RCC work (TMT Steel) 26.66 Tonnes 4.BBM/Concrete Blocks 130.00 Cum. 5. Flooring (Vitrified/Granite/Ceramic) 592.00 Sqm 6. Plastering 2384.00 Sqm 7. Painting 2514.00 Sqm 8. MS Grill 992.00 Kgs Note:The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/ autonomous bodies of Government will be considered, for the clause 3.2 (c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2d The tenderer or his identified sub contractor should possess required valid electrical license issued by KPWD,Government electrical Inspectorate for executing building electrification works and should have executed similar Building electrical works totaling to Rs.6.58 Lakhs in any one year Note.The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government,Semi Government,Government undertaking,autonomous bodies of Government will be considered, for the clause 3.2d. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e):The Tenderer or his identified sub-contractor should possess valid license issued by BWSSB/KUWS&DB for executing water supply/sanitary engineering works and should have executed similar building water supply/sanitary engineering works totaling to Rs.2.95 Lakhs in any one year Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/ autonomous bodies of Government will be considered, for the clause 3.2 (e). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Class III & Above PWD Registered Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Clause ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria,will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity(AxNx1.5-B)where A Maximum value of civil engineering works executed in any one year during the last five years i.e (2019-20-2023-24)(updated to 2024-25 price level)taking into account the completed as well as works in progress .N Number of years prescribed for completion of the works for which tender are invited. B Value at 2024-25 price level, of existing commitments of and ongoing works to be Completed during the next 6 months .Note:(1)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent(2)Tenderer shall submit the list of Ongoing works duly certified by the Auditor/Chartered Accountant. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work 1) Site Engineer (Civil) B.E. Civil with minimum experience of 5 years in the Construction of buildings OR Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One) 2) Site Engineer (Electrical Engineer) B.E. Electrical with minimum experience of 5 years in the Construction of buildings Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One) Note: 1) The tenderer shall submit list and photo identity proof such as Aadhar Card/Voter ID/Employee ID/Pass port/Driving License etc., for the key personnel such as project manager/site engineer to be deployed at each of the worksite. 2) The key personnel deployed at the site for this work should be working for a minimum period of one year with the tenderers and experience certificate has to be furnished in this regard. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates None None None None Clause ITT 3.3(b):Liquid assets and/or availability of credit facilities of not less than Rs.58.30 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD Registration Certificate True Technical Bid GST Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719225454000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Health and Family Welfare Department, Engineering Wing, 3rd Floor Arogya Soudha 1st Cross Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None