createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1718957124929 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2130.00 emd 170000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 03-07-2024 17:00:00 tenderQueryClose 01-07-2024 17:30:00 technicalBidOpen 05-07-2024 16:30:00 publishedDate 26-06-2024 16:30:17 publishedByPost PWD_EE_DIV_CKD publishedByUser KPE15950 - SUNILKUMAR N BALOL bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Shri.Sunilkumar N Balol EE PWD Division Chikodi splitEmdRequiredYn True emdBankGuarantee 120000.00 emdCash 50000.00 bgValidityPeriod 45 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8338273859 mobileNumber 8338273859 tenderSupplierList None
tenderSchedule	createdTs 1718957124959 version 12 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT11061 title Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba in Chikodi taluka of Belagavi Dist under 4059-PW-Works-2024-25 description Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba in Chikodi taluka of Belagavi Dist under 4059-PW-Works-2024-25 category WORKS categoryText Works ecv 8488135.65 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1686 locationName PWD Division Office Chikkodi provisionalAmount 9000000.0 groupOverheadTotal 0.0 fileNumber KPWD/RVP/EXAMBA/SCHOOL
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1718957125000 0 None None Buildings Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (GROUND FLOOR) 7800399.46 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3324996 116493 None codeVol-1 Page no 8 Item no 1.12) Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- including cost of all materials, labor ,HOM,l Cum 115.46 115.46 114.0 False None None False None False 13162.44 0 3324997 116493 None codeVol-1 Page no 8 Item no 1.14.1) Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m ---- including cost of all materials, labor ,HOM,l Cum 123.97 123.97 135.79 False None None False None False 16833.8863 0 3324998 116493 None codeVol-1 Page no 15 Item no 2.1.3) Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.3 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates " ---- including cost of all materials, labor ,HOM,l Cum 7279.03 7279.03 54.982 False None None False None False 400215.62746 0 3324999 116493 None Data Rate(MR) Providing two bulb underreemed pile foundaation upto maximum 3.5m depth including hire charges of machinearies digging the pile holes, labour charges and laying 20mm and down size RCC M 25 keeping the reinforcement edge cutting etc., complete as per (450 mm Dia Pile)Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded oarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcemen & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labor ,HOM,l Rmtr 3646.2 3646.2 168.0 False None None False None False 612561.6 0 3325000 116493 None codeVol-1 Page no 15 Item no 2.2.3 2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.2.2.1 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- including cost of all materials, labor ,HOM,l Cum 7700.77 7700.77 26.15 False None None False None False 201375.1355 0 3325001 116493 None code Page no 111 Item no Sl no 1a Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8% ---- including cost of all materials, labor ,HOM,l Cum 616.06 616.06 26.15 False None None False None False 16109.969 0 3325002 116493 None codeVol-1 Page no 16 Item no 2.4.3 2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.3 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- including cost of all materials, labor ,HOM,l Cum 7700.77 7700.77 15.33 False None None False None False 118052.8041 0 3325003 116493 None code Page no 111 Item no Sl no 9 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% ---- including cost of all materials, labor ,HOM,l Cum 5390.54 5390.54 2.65 False None None False None False 14284.931 0 3325004 116493 None code Page no 111 Item no Sl no 2 Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l Cum 3850.39 3850.39 12.68 False None None False None False 48822.9452 0 3325005 116493 None codeVol-1 Page no 16 Item no 2.5.2 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- including cost of all materials, labor ,HOM,l Cum 8316.98 8316.98 83.52 False None None False None False 694634.1696 0 3325006 116493 None code Page no 111 Item no Sl no 9 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% ---- including cost of all materials, labor ,HOM,l Cum 5821.89 5821.89 15.64 False None None False None False 91054.3596 0 3325007 116493 None code Page no 112 Item no Sl no 14 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% ---- including cost of all materials, labor ,HOM,l Cum 4990.19 4990.19 23.46 False None None False None False 117069.8574 0 3325008 116493 None code Page no 112 Item no Sl no 19 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% ---- including cost of all materials, labor ,HOM,l Cum 3742.64 3742.64 2.38 False None None False None False 8907.4832 0 3325009 116493 None code Page no 112 Item no Sl no 15 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% ---- including cost of all materials, labor ,HOM,l Cum 4158.49 4158.49 42.04 False None None False None False 174822.9196 0 3325010 116493 None codeVol-2 Page no 9 Item no 5.1.1) 5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: 5.1.1 Cement mortar 1:6 (1 cement: 6 coarse sand) ---- including cost of all materials, labor ,HOM,l Cum 6819.61 6819.61 7.81 False None None False None False 53261.1541 0 3325011 116493 None codeVol-1 Page no 7 Item no 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- including cost of all materials, labor ,HOM,l Cum 526.27 526.27 196.08 False None None False None False 103191.0216 0 3325012 116493 None codeVol-2 Page no 14 Item no 6.8 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l Cum 9685.52 9685.52 83.08 False None None False None False 804673.0016 0 3325013 116493 None codeVol-1 Page no 18 Item no 2.11.a 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification." ---- including cost of all materials, labor ,HOM,l Tonne 108726.04 108726.04 18.215 False None None False None False 1980444.8186 0 3325014 116493 None Code Vol-2 Page no 99 Item no 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications." ---- including cost of all materials, labor ,HOM,l Cum 167815.14 167815.14 0.253 False None None False None False 42457.23042 0 3325015 116493 None code 2023-24Vol-2 Page no 105 Item no 12.57.8 12.57 Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 12.57.8 -do- 40 mm thick one side teak and one side commercial" ---- including cost of all materials, labor ,HOM,l Sqm 5226.22 5226.22 12.6 False None None False None False 65850.372 0 3325016 116493 None codeVol-2 Page no 104 Item no 12.51 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost of all materials, labor ,HOM,l Each 1234.85 1234.85 5.0 False None None False None False 6174.25 0 3325017 116493 None code 2023-24Vol-2 Page no 109 Item no 12.86 Providing & fixing of 2track 2panel sliding windows made out of multi chambered UPVC Matching to RAL9016 sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 50mm width 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made ---- including cost of all materials, labor ,HOM,l Sqm 6551.01 6551.01 28.8 False None None False None False 188669.088 0 3325018 116493 None codeVol-2 Page no 86 Item no 11.34B 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. ---- including cost of all materials, labor ,HOM,l Kg 222.42 222.42 712.8 False None None False None False 158540.976 0 3325019 116493 None codeVol-2 Page no 41 Item no 8.1.1 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- including cost of all materials, labor ,HOM,l Sqm 309.93 309.93 430.01 False None None False None False 133272.9993 0 3325020 116493 None codeVol-2 Page no 42 Item no 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- including cost of all materials, labor ,HOM,l Sqm 121.54 121.54 606.31 False None None False None False 73690.9174 0 3325021 116493 None codeVol-2 Page no 42 Item no 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 450.91 450.91 789.65 False None None False None False 356061.0815 0 3325022 116493 None codeVol-2 Page no 60 Item no 9.12.2 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm " ---- including cost of all materials, labor ,HOM,l Sqm 1391.63 1391.63 207.1 False None None False None False 288206.573 0 3325023 116493 None codeVol-2 Page no 63 Item no 9.23 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ---- including cost of all materials, labor ,HOM,l Sqm 2997.18 2997.18 132.711 False None None False None False 397758.75498 0 3325024 116493 None codeVol-2 Page no 46 Item no 8.33.2 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 167.73 167.73 32.76 False None None False None False 5494.8348 0 3325025 116493 None codeVol-2 Page no 47 Item no 8.33.3 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 168.94 168.94 39.6 False None None False None False 6690.024 0 3325026 116493 None code Vol-2 Page no 46 Item no 8.33.1 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)" ---- including cost of all materials, labor ,HOM,l Sqm 192.03 192.03 606.31 False None None False None False 116429.7093 0 3325027 116493 None codeVol-2 Page no 46 Item no 8.30 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 211.48 211.48 789.65 False None None False None False 166995.182 0 3325028 116493 None Code Vol-2 Page no 84 Item no 11.26.1 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge." ---- including cost of all materials, labor ,HOM,l Kg 167.73 167.73 237.6 False None None False None False 39852.648 0 3325029 116493 None codeVol-2 Page no 106 Item no 12.69.2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm" ---- including cost of all materials, labor ,HOM,l Each 295.34 295.34 15.0 False None None False None False 4430.1 0 3325030 116493 None codeVol-2 Page no 105 Item no 12.58 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- including cost of all materials, labor ,HOM,l Each 145.85 145.85 5.0 False None None False None False 729.25 0 3325031 116493 None codeVol-2 Page no 105 Item no 12.65 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l Each 71.71 71.71 5.0 False None None False None False 358.55 0 3325032 116493 None codeVol-2 Page no 105 Item no 12.61 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l Each 1203.25 1203.25 5.0 False None None False None False 6016.25 0 3325033 116493 None codeVol-2 Page no 105 Item no 12.63 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- including cost of all materials, labor ,HOM,l Each 158.0 158.0 5.0 False None None False None False 790.0 0 3325034 116493 None codeVol-2 Page no 107 Item no 12.73.1 12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 12.73.1 125mm " ---- including cost of all materials, labor ,HOM,l Each 53.48 53.48 10.0 False None None False None False 534.8 0 3325035 116493 None codeVol-2 Page no 105 Item no 12.60 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete ---- including cost of all materials, labor ,HOM,l Each 1278.6 1278.6 5.0 False None None False None False 6393.0 0 3325036 116493 None code Vol-2 Page no 5 Item no 4.1) 4.0 ANTI-TERMITE TREATMENT 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications." ---- including cost of all materials, labor ,HOM,l Sqm 143.42 143.42 322.46 False None None False None False 46247.2132 0 3325037 116493 None data rate Providing and fixing Green board for class room (Quotation rate) ---- including cost of all materials, labor ,HOM,l Each 9600.48 9600.48 5.0 False None None False None False 48002.4 0 3325038 116493 None code Vol-2 Page no 64 Item no 9.36 Providing flooring with 25mm thick polished Cuddapah slabs usingcement mortar 1:6, 25mm thick over existing cement concrete bed ortop of roof laid to line and level and jointed with cement slurry mixedwith pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications. ---- including cost of all materials, labor ,HOM,l Sqm 2005.41 2005.41 20.25 False None None False None False 40609.5525 0 3325039 116493 None Code Vol-2 Page no 125 Item no 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge." ---- including cost of all materials, labor ,HOM,l Mtr 353.68 353.68 21.0 False None None False None False 7427.28 0 3325040 116493 None SR 2023-24Vol-2 Page no A-24 Item no S.No. 3 A-19 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (Volume 2 Material component S.No.245, P.No. A-19) ---- including cost of all materials, labor ,HOM,l Sqm 330.4 330.4 10.8 False None None False None False 3568.32 0 3325041 116493 None P.No. 272 I.No. 37.63.2 Providing two bulb underreemed pile foundation upto maximum 5m depth including hire charges of machineries digging the pile holes, labour charges and laying 20mm and down size jelly RCC M 20 keeping the reinforcement edge cutting etc., complete as per specifications. - - 30 cm dia - including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. ---- including cost of all materials, labor ,HOM,l Rmtr 1809.73 1809.73 45.6 False None None False None False 82523.688 0 3325042 116493 None PWD SR 2023-24Vol-2 Page no S. No. 444 Item no A Hold fast ---- including cost of all materials, labor ,HOM,l Each 59.0 59.0 30.0 False None None False None False 1770.0 0 3325043 116493 None PWD SR 2023-24Vol-2 Page no 44 Item no 8 8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications ---- including cost of all materials, labor ,HOM,l Sqm 1504.67 1504.67 23.511 False None None False None False 35376.29637 0 1718957125000 0 None None Buildings Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (FIRST FLOOR) 312640.09 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3325044 116494 None codeVol-1 Page no 16 Item no 2.5.2 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates" ---- including cost of all materials, labor ,HOM,l Cum 8400.15 8400.15 1.84 False None None False None False 15456.276 0 3325045 116494 None code Page no 111 Item no Sl no 9 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% ---- including cost of all materials, labor ,HOM,l Cum 5880.11 5880.11 1.16 False None None False None False 6820.9276 0 3325046 116494 None code Page no 112 Item no Sl no 14 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% ---- including cost of all materials, labor ,HOM,l Cum 5040.09 5040.09 0.68 False None None False None False 3427.2612 0 3325047 116494 None codeVol-2 Page no 14 Item no 6.8 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost of all materials, labor ,HOM,l Cum 9782.38 9782.38 10.053 False None None False None False 98342.26614 0 3325048 116494 None codeVol-1 Page no 18 Item no 2.11.a 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification." ---- including cost of all materials, labor ,HOM,l Tonne 109813.3 109813.3 0.2549 False None None False None False 27991.41017 0 3325049 116494 None code Vol-2 Page no Item no 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications." ---- including cost of all materials, labor ,HOM,l Cum 169493.29 169493.29 0.0506 False None None False None False 8576.360474 0 3325050 116494 None code Vol-2 Page no Item no 12.57.8 12.57 Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 12.57.8 -do- 40 mm thick one side teak and one side commercial" ---- including cost of all materials, labor ,HOM,l Sqm 5278.48 5278.48 2.52 False None None False None False 13301.7696 0 3325051 116494 None codeVol-2 Page no 104 Item no 12.51 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost of all materials, labor ,HOM,l Each 1247.19 1247.19 1.0 False None None False None False 1247.19 0 3325052 116494 None codeVol-2 Page no 42 Item no 8.8 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 455.42 455.42 43.71 False None None False None False 19906.4082 0 3325053 116494 None codeVol-2 Page no 41 Item no 8.1.1 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. " ---- including cost of all materials, labor ,HOM,l Sqm 313.03 313.03 36.41 False None None False None False 11397.4223 0 3325054 116494 None codeVol-2 Page no 50 Item no 8.51 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- including cost of all materials, labor ,HOM,l Sqm 122.76 122.76 36.41 False None None False None False 4469.6916 0 3325055 116494 None codeVol-2 Page no 46 Item no 8.33.2 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 169.4 169.4 6.55 False None None False None False 1109.57 0 3325056 116494 None code Vol-2 Page no 46 Item no 8.33.1 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)" ---- including cost of all materials, labor ,HOM,l Sqm 193.95 193.95 36.41 False None None False None False 7061.7195 0 3325057 116494 None codeVol-2 Page no 46 Item no 8.30 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost of all materials, labor ,HOM,l Sqm 213.59 213.59 43.71 False None None False None False 9336.0189 0 3325058 116494 None codeVol-3 Page no 26 Item no 7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ---- including cost of all materials, labor ,HOM,l Sqm 697.25 697.25 25.11 False None None False None False 17507.9475 0 3325059 116494 None codeVol-3 Page no 82 Item no 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge." ---- including cost of all materials, labor ,HOM,l Kg 166.95 166.95 376.61 False None None False None False 62875.0395 0 3325060 116494 None codeVol-2 Page no 106 Item no 12.69.2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm" ---- including cost of all materials, labor ,HOM,l Each 298.3 298.3 3.0 False None None False None False 894.9 0 3325061 116494 None codeVol-2 Page no 105 Item no 12.58 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- including cost of all materials, labor ,HOM,l Each 147.31 147.31 1.0 False None None False None False 147.31 0 3325062 116494 None codeVol-2 Page no 105 Item no 12.65 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l Each 72.43 72.43 1.0 False None None False None False 72.43 0 3325063 116494 None codeVol-2 Page no 105 Item no 12.61 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- including cost of all materials, labor ,HOM,l Each 1215.28 1215.28 2.0 False None None False None False 2430.56 0 3325064 116494 None codeVol-2 Page no 105 Item no 12.63 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- including cost of all materials, labor ,HOM,l Each 159.58 159.58 1.0 False None None False None False 159.58 0 3325065 116494 None codeVol-2 Page no 107 Item no 12.73.1 12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 12.73.1 125mm " ---- including cost of all materials, labor ,HOM,l Each 54.01 54.01 2.0 False None None False None False 108.02 0 1718957125000 0 None None Buildings Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School at Examba (ELECTRICAL WORK) 177328.1 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3325066 116495 None 1.9.2 SupplyingPVCflexibleconduitpipe.mmdiafixingonsurfaceoverinvertedtaperedwoodenplugsorphillplugsorrawlplugsandclampedusingheavygaugesaddlesatanintervalof300mmusingNFscrews and on either end of the pipe terminated completely ---- including cost of all materials, labor ,HOM,l Mtr 25.96 25.96 400.0 False None None False None False 10384.0 0 3325067 116495 None 1.6.6 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. ---- including cost of all materials, labor ,HOM,l Each 87.3 87.3 30.0 False None None False None False 2619.0 0 3325068 116495 None 2.1.2 Supplying and wiring adopting loop systeminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVCinsulatedcopperwire(confirmingtoIS694:andlatestamendments)witha6AmpsflushtypeSPcontrolswitchshallbefixedontheexistingplasticsheet/gangbox,theotherendofthewiresshallbeterminatedwithsufficientlooselengthinawood/PVCroundblock.completeforeach outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- including cost of all materials, labor ,HOM,l Point 464.92 464.92 15.0 False None None False None False 6973.8 0 3325069 116495 None 2.1.3 c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- including cost of all materials, labor ,HOM,l Point 672.6 672.6 15.0 False None None False None False 10089.0 0 3325070 116495 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 sqmm ---- including cost of all materials, labor ,HOM,l Mtr 30.68 30.68 400.0 False None None False None False 12272.0 0 3325071 116495 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5 sqmm ---- including cost of all materials, labor ,HOM,l Mtr 49.6 49.6 75.0 False None None False None False 3720.0 0 3325072 116495 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4 sqmm ---- including cost of all materials, labor ,HOM,l Mtr 74.34 74.34 200.0 False None None False None False 14868.0 0 3325073 116495 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall" 1-2Way ---- including cost of all materials, labor ,HOM,l Each 162.8 162.8 10.0 False None None False None False 1628.0 0 3325074 116495 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall" 8Way ---- including cost of all materials, labor ,HOM,l Each 308.0 308.0 5.0 False None None False None False 1540.0 0 3325075 116495 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall" 10-12Way ---- including cost of all materials, labor ,HOM,l Each 376.4 376.4 10.0 False None None False None False 3764.0 0 3325076 116495 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- including cost of all materials, labor ,HOM,l Each 161.7 161.7 10.0 False None None False None False 1617.0 0 3325077 116495 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8Moudule ---- including cost of all materials, labor ,HOM,l Each 335.1 335.1 5.0 False None None False None False 1675.5 0 3325078 116495 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 12Moudule ---- including cost of all materials, labor ,HOM,l Each 405.9 405.9 10.0 False None None False None False 4059.0 0 3325079 116495 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Using Group "A" materials 6Amps one way. ---- including cost of all materials, labor ,HOM,l Each 120.4 120.4 40.0 False None None False None False 4816.0 0 3325080 116495 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- including cost of all materials, labor ,HOM,l Each 421.26 421.26 10.0 False None None False None False 4212.6 0 3325081 116495 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- including cost of all materials, labor ,HOM,l Each 212.4 212.4 20.0 False None None False None False 4248.0 0 3325082 116495 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- including cost of all materials, labor ,HOM,l Each 384.68 384.68 10.0 False None None False None False 3846.8 0 3325083 116495 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- including cost of all materials, labor ,HOM,l Each 278.48 278.48 20.0 False None None False None False 5569.6 0 3325084 116495 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. ---- including cost of all materials, labor ,HOM,l Each 201.78 201.78 20.0 False None None False None False 4035.6 0 3325085 116495 None 11.3.2 Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0.9 along with CE approved. years Warranty against any manufacturing defect working under standard electrical condition.12.3.2 LED light fitting 1 x 4'- 20/22 w Each LED light fitting 1 x 4'- 20/22 w Each ---- including cost of all materials, labor ,HOM,l Each 814.2 814.2 15.0 False None None False None False 12213.0 0 3325086 116495 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32Amps ---- including cost of all materials, labor ,HOM,l Each 284.4 284.4 5.0 False None None False None False 1422.0 0 3325087 116495 None 5.18.1 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898GROUP A6-32AMPS SP ---- including cost of all materials, labor ,HOM,l Each 489.7 489.7 5.0 False None None False None False 2448.5 0 3325088 116495 None 5.18.4 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6-32 AMPS DP GROUP A ---- including cost of all materials, labor ,HOM,l Each 872.0 872.0 5.0 False None None False None False 4360.0 0 3325089 116495 None 5.19.11 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.III - Double Door 4WAY TP AND N ---- including cost of all materials, labor ,HOM,l Each 4764.8 4764.8 5.0 False None None False None False 23824.0 0 3325090 116495 None 12.56 Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmallroundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia ---- including cost of all materials, labor ,HOM,l No 4141.8 4141.8 1.0 False None None False None False 4141.8 0 3325091 116495 None 7.3.1.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system and as per technical data approved.48" Sweep 1200mm Regular model ---- including cost of all materials, labor ,HOM,l Each 3521.1 3521.1 5.0 False None None False None False 17605.5 0 3325092 116495 None 5.6.1 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.8"x6"1.5" ---- including cost of all materials, labor ,HOM,l Each 102.7 102.7 5.0 False None None False None False 513.5 0 3325093 116495 None 5.6.4 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12"x12"2" ---- including cost of all materials, labor ,HOM,l Each 213.6 213.6 5.0 False None None False None False 1068.0 0 3325094 116495 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall / ceiling / Rafter / Girders ---- including cost of all materials, labor ,HOM,l Each 144.0 144.0 5.0 False None None False None False 720.0 0 3325095 116495 None 13.1 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- including cost of all materials, labor ,HOM,l Each 201.78 201.78 5.0 False None None False None False 1008.9 0 3325096 116495 None 1.9.1 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely 20mm ---- including cost of all materials, labor ,HOM,l Mtr 22.4 22.4 10.0 False None None False None False 224.0 0 3325097 116495 None 1.2.1 Supplying heav gauge PVC conduit pipe mm dia.mm thick confirming to IS 2509 with suitable size bends,metal/PVC Junction boxes, adhesive paste etc. and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary Part - ichapter - i,Page No - 119/20 mm dia 2 mm thick ---- including cost of all materials, labor ,HOM,l m 77.88 77.88 75.0 False None None False None False 5841.0 0 1718957125000 0 None None Buildings Construction of Additional Five classrooms to Govt Boys Kannada Higher Primary School Examba (Furnitures) 197768.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3325098 116496 None KSFIC DWD 052 Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H - Shape patti. Table shall be neatly finished and polished. ---- including cost of all materials, labor ,HOM,l Each 27777.2 27777.2 5.0 False None None False None False 138886.0 0 3325099 116496 None KSFIC DWD 069 Teak wood Chair (Heavy model): Seat with taek wood planks or cushion. Made out of teak wood chair 3''x1.25'' back legs 2.25''x2.25'' front legs chair side side bars 3''x1.25'' back with 8 reapers. Chair size standard size. Chair shall be neatly finished and polished. ---- including cost of all materials, labor ,HOM,l Each 11776.4 11776.4 5.0 False None None False None False 58882.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1718957126000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1718957126000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1718957126000 1 None None ELIGIBILITY Tender invited only for eligible contractors registered under Karnataka Public Works Dept None 1718957126000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1718957126000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1718962081000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date and time of bid submission. None 1718962087000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1718962093000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in Multiple Transactions are liable for rejection. None 1718962100000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1718962106000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders None 1718962113000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1718962120000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid. None 1718962126000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thiry first day of March of succeeding year(both days inclusive None 1718962133000 0 None None ELIGIBILITY The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire committement Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification. None 1718962139000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder None 1718962145000 0 None None ELIGIBILITY The Employer reserves the right to Reject any or all Tenders without assigning any reason None 1718962152000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing KP-procurement portal None 1718962160000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1718962166000 0 None None ELIGIBILITY All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work. None 1718962171000 0 None None ELIGIBILITY Physical quantities requirement to qualify the Tenderer is 80% of the estimated quantity as per Govt Order No. .PW/630/CRM/2014 Bangalore Dated: 17-11-2014 None 1718962176000 0 None None ELIGIBILITY Department will not supply any materials None 1718962181000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable. None 1718962186000 0 None None ELIGIBILITY Epayment Challan should be Scanned None 1718962191000 0 None None ELIGIBILITY The Tenderer must be present during opening of tender and submit uploaded documents duly attested by Gazzeted Officer not below the rank of Executive Engineer and also produce original documents for confirmation at the time of opening. None 1718962196000 0 None None ELIGIBILITY As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund. None 1718962201000 0 None None ELIGIBILITY THE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA.ANY JUNK ,SUPERFLUOS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTED None 1718962224000 0 None None ELIGIBILITY The Project Completion period is 6 months and the Tenderer should maintain work during the defect liability period, which is (1) One year after successful completion of the work. None 1718962236000 0 None None ELIGIBILITY Work Completion/Execution Period : 6 Months Including Mansoon. None 1718962244000 0 None None ELIGIBILITY Financial turover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section None 1718962250000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Chikkodi during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned. None 1718962255000 0 None None ELIGIBILITY The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion. None 1718962289000 0 None None ELIGIBILITY The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion. None 1718962296000 0 None None ELIGIBILITY The contractor should employ only registered labours Govt Circular No PWD198BMS2009 Dated 24 06 2009 As per EPF and MP act 1952 in respect of of the employees angaged by or through contractors agencies and contractors shall have provident fund code number all the contract employees deployed by them are enrolled as members of provident fund None 1718962301000 0 None None ELIGIBILITY Unique Document Identification Number (UDIN) form practicing Chartered Account is preferred None 1718962307000 0 None None ELIGIBILITY Appeal as per the Government Ltr No. 572/CRM/2020/PWD-COMM-1-PWD-SEC, Dtated: 09-10-2020 the appeal received in KPPP Portal as per KTTP act/rules within the stipulated time will only the considered. Any written appeal received shall not be considered. None 1718962314000 0 None None ELIGIBILITY The items quoted shall include cost of Royalty charges on constructive materials and other taxes (including GST)as per the rates prevailing Govt Orders at the time of execution and including all the cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machinary and equipments, etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work. None 1718962320000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in completed manner (Section 3 & 4 of the bid document) and shall be uploaded properly signed by the tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1718962326000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Government orders None 1718962332000 0 None None ELIGIBILITY If no bid received auto extension will be done by KPPP itself for 2 days None 1718962342000 0 None None ELIGIBILITY The cost of steel reinforcement & formwork shall be paid separately for concrete items only None 1718962350000 0 None None ELIGIBILITY The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time None 1718962378000 0 None None ELIGIBILITY The EMD of Rs.1,70,000.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs.50,000.00 br e payment Part (2) Rs.1,20,000.00 EMD shall be in the form Bank Guarantee in the prescribed format obtained from any Nationalised / Scheduled Bank in favour of Executive Engineer, PWD Division, Chikodi payable at Chikodi. None 1718965602000 0 None None ELIGIBILITY The items Rates are inclusive of GST None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work of value not less than Rs.42.44 Lakhs, in previous five years Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20,2020-21,2021-22,2022-23,2023-24 (c) executed in any one year, the following minimum quantities of work: 1)Excavation-200.00 CUM,2)BBM/SSM-81.00 CUM,3)Plastering-1059.00 SQM,4)Concrete(PCC/RCC)-145.00 CUM,5)Steel-15,536.00 KG,6)Flooring-288.00 SQM. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Each tenderer should demonstrate availability of few key equipments/machinery for execution of the work.However as per Govt circular No.GO FD/AE 263/EXP12-2022 dt 11-05-2022,this clause for owning key equipments for works costing upto Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per MORTH specification.Availability of Self loading mixer/Mechanical Cement Concrete Mixers with Weigh Batcher,Availability of Steel Centering plate of standard size ,Availability of Pin Vibrators ,Availability of Plate Vibrators,Availability by Tippers ,Availability by Water Tanker&Availability by Excavater. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Hire commitment Agreement ownership documents Lease Commitments Agreement Information in format-8 None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (AxNx2.5-B)Where A is Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress.N -Number of years prescribed for completion of the works for which tenders are invited-0.5 Year.B-Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.5 year (Period of completion of the works for which tenders are invited Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Calculation sheet on lettar head None None None None Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Auditors Report None None None None Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Information on the Letter Head of the tenderer None None None None Latest Income Tax Clearance Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned Copy of ITC Certificate None None None None Value at 2024-25 price level, of existing commitments and on-going works to be executed during the next 12 months(Financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25), (Monthwise commitment shall be furnished). Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Statement on the Letter head of the tenderer None None None None Liquid Assets and or availability of credit facilities of no less than Rs.25.46 Lakhs (Credit Lines or letter of credit or certificates from the banks for meeting the fund requirement etc., Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.,2019-20,2020-21,2021-22,2022-23 & 2023-24 (a) achieved in at least two financial years a minimum financial turnover of Rs.84.88 Lakhs (in all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The EMD of Rs.1,70,000.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs.50,000.00 br e payment Part (2) Rs.1,20,000.00 EMD shall be in the form Bank Guarantee in the prescribed format obtained from any Nationalised / Scheduled Bank in favour of Executive Engineer, PWD Division, Chikodi payable at Chikodi. Others EMD createdTs version createdDate modifiedDate documentName None None None None Others -- Epayment Challan and Part-II Scanned copy of EMD None None None None Assessed Tender Capacity shall be more than the Tendered Amount Others Tender Capacity createdTs version createdDate modifiedDate documentName None None None None Others -- Assessment on the Letter Head of the Tenderer None None None None Principal Place of Business Others Place of Business createdTs version createdDate modifiedDate documentName None None None None Others -- Declaration by the Bidder on the Letter Head None None None None Information on litigation in which the Tenderer is involved: Others Litigation createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 10 None None None None Information on works which are yet to be completed. Others Committed Works createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 5 and Certificates in Format 3 None None None None Information of the works for which Tender acceptance letters are received. Others New Works createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 6 and Letter of Acceptance None None None None Constitutional or Legal Status of the Tenderer Others Legal createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Name, Address, telephone No., Fax No., and email ID of the Tenderers Bankers Others Bankers Details createdTs version createdDate modifiedDate documentName None None None None Others -- Information on the Letter Head of the tenderer None None None None Information of the works for which Tenderer has submitted Tender Others Tendered Works createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Format 7
tenderCriterionDocumentList	documentName optional documentTypeText Contractors KPWD Civil Registration Certificate True Technical Bid Annual Turn Over Certificate from 2019-20 to 2023-24 True Technical Bid Financial work done certificate True Technical Bid Qtywise work done certificate True Technical Bid Machineries documents True Technical Bid Line of credit in prescribed format True Technical Bid GST Registratation True Technical Bid Ongoing work details True Technical Bid Any other related documents True Technical Bid UDIN form practicing Chartered Account is preferred True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None