| 3363464 | 118289 | None | 2.6 | Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. | Sqm | 4.13 | 4.13 | 43.0 | False | None | None | False | None | False | 177.59 | 0 |
| 3363465 | 118289 | None | 1.5.1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour,tools, usage & other appurtenances required to complete the work. | Cum | 363.4 | 363.4 | 67.3 | False | None | None | False | None | False | 24456.82 | 0 |
| 3363466 | 118289 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 323.23 | 323.23 | 32.35 | False | None | None | False | None | False | 10456.4905 | 0 |
| 3363467 | 118289 | None | 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Sqm | 576.09 | 576.09 | 32.0 | False | None | None | False | None | False | 18434.88 | 0 |
| 3363468 | 118289 | None | 4.1 | Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top
surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20 percentage E.C. or Lindane 20percentage E.C. at 3.19 L per sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 143.37 | 143.37 | 13.5 | False | None | None | False | None | False | 1935.495 | 0 |
| 3363469 | 118289 | None | 2.1.2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6884.02 | 6884.02 | 11.39 | False | None | None | False | None | False | 78408.9878 | 0 |
| 3363470 | 118289 | None | 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Plinth & window sill | Cum | 7783.39 | 7783.39 | 0.84 | False | None | None | False | None | False | 6538.0476 | 0 |
| 3363471 | 118289 | None | 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 8316.84 | 8316.84 | 28.55 | False | None | None | False | None | False | 237445.782 | 0 |
| 3363472 | 118289 | None | 2.4.3 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11813.76 | 11813.76 | 29.6 | False | None | None | False | None | False | 349687.296 | 0 |
| 3363473 | 118289 | None | 2.11a | KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 (FE 500) | Tonne | 108726.04 | 108726.04 | 4.91 | False | None | None | False | None | False | 533844.8564 | 0 |
| 3363474 | 118289 | None | 5.4 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. in steps | Cum | 7836.89 | 7836.89 | 0.29 | False | None | None | False | None | False | 2272.6981 | 0 |
| 3363475 | 118289 | None | 6.5 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 13341.45 | 13341.45 | 36.1 | False | None | None | False | None | False | 481626.345 | 0 |
| 3363476 | 118289 | None | D R | KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung 2/3 openable 1/3 fixed as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 kg/m both for outer and inner frames and central mullion section of size 25x46x3mm, weighing 2.28kg/m all duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows, not more than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of approved size, section should be cut to length welded and grinded electrically subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corrosive paint and finishing two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour charges and HOM of machinery complete as per specifications. | Sqm | 3927.04 | 3927.04 | 1.62 | False | None | None | False | None | False | 6361.8048 | 0 |
| 3363477 | 118289 | None | D R | Providing and fixing factory made out of M.S angale of size 50mmx50mm x6mm on three sides 20x20x 3mm at bottom 20x20x 3mm old fast 0.23mtr length on both sides 2 nos each, 100mm ms hinges 3nos with nessary locking arragment including one coat anti corrosive red lead ready mix priming coat, all labour charges for cuuting, welding, grandining, loading & unloading, transportation to work spot etc. complete as per directions of PMC/EIC. FOR TOILET DOORS | Rmtr | 501.5 | 501.5 | 27.0 | False | None | None | False | None | False | 13540.5 | 0 |
| 3363478 | 118289 | None | D R | Providing and fixing factory made claded door shutters 29mm thick manufactured out of 25mm thick boiled water proof solid core single leaf composite commercial ply laminated with 2 mm thick pvc sheet bon back side &2mm thick pre laminated pvc sheet on front side 10mm thick pvc sheet batton lipping all round using pvc solvent cement etc complete icluding cost pf labour material , transportation including fixing powder coated handles 2 nos 150mm tower bolt 1nos MS aldrop 1 nos with necessary srews etc complete as per specification | Sqm | 3894.0 | 3894.0 | 9.45 | False | None | None | False | None | False | 36798.3 | 0 |
| 3363479 | 118289 | None | 8.5.2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 424.17 | 424.17 | 335.0 | False | None | None | False | None | False | 142096.95 | 0 |
| 3363480 | 118289 | None | 9.10 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1344.23 | 1344.23 | 71.5 | False | None | None | False | None | False | 96112.445 | 0 |
| 3363481 | 118289 | None | 8.16 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment | m | 41.32 | 41.32 | 12.0 | False | None | None | False | None | False | 495.84 | 0 |
| 3363482 | 118289 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life | Sqm | 192.03 | 192.03 | 340.0 | False | None | None | False | None | False | 65290.2 | 0 |
| 3363483 | 118289 | None | 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Enamel paint collapsible door | Sqm | 139.77 | 139.77 | 2.52 | False | None | None | False | None | False | 352.2204 | 0 |
| 3363484 | 118289 | None | 11.3 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 10058.65 | 10058.65 | 2.52 | False | None | None | False | None | False | 25347.798 | 0 |
| 3363485 | 118289 | None | 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.92 | 309.92 | 65.0 | False | None | None | False | None | False | 20144.8 | 0 |
| 3363486 | 118289 | None | 9.24 | roviding and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. | Sqm | 3466.32 | 3466.32 | 27.0 | False | None | None | False | None | False | 93590.64 | 0 |
| 3363487 | 118289 | None | 13.31.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall | m | 294.12 | 294.12 | 33.0 | False | None | None | False | None | False | 9705.96 | 0 |
| 3363488 | 118289 | None | 13.3.2 | Providing and fixing brass stop cock of approved quality 20 mm nominal bore | Nos | 370.69 | 370.69 | 10.0 | False | None | None | False | None | False | 3706.9 | 0 |
| 3363489 | 118289 | None | 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25mm Nominal bore | Nos | 667.25 | 667.25 | 2.0 | False | None | None | False | None | False | 1334.5 | 0 |
| 3363490 | 118289 | None | 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | m | 876.3 | 876.3 | 31.0 | False | None | None | False | None | False | 27165.3 | 0 |
| 3363491 | 118289 | None | 13.4.3 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40mm nominal bore | Nos | 853.21 | 853.21 | 2.0 | False | None | None | False | None | False | 1706.42 | 0 |
| 3363492 | 118289 | None | 13.4.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32mm Nominal bore | Nos | 726.8 | 726.8 | 1.0 | False | None | None | False | None | False | 726.8 | 0 |
| 3363493 | 118289 | None | 13.58 | Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | Nos | 420.52 | 420.52 | 3.0 | False | None | None | False | None | False | 1261.56 | 0 |
| 3363494 | 118289 | None | 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 10.93 | 10.93 | 1000.0 | False | None | None | False | None | False | 10930.0 | 0 |
| 3363495 | 118289 | None | D R | upply & installing of monoblock pumpset having CI impeller with adequate H.P motor capable of giving a discharge of 4.50 LPS against a total head of 20m to work on a 3 phase with necessary foot valve, gate valve, non return valve with priming arrangements, foundation bolts,PCC footingin CC 1:2:4 & suitable L & T starter etc complete. Market Rate | Nos | 20060.0 | 20060.0 | 1.0 | False | None | None | False | None | False | 20060.0 | 0 |
| 3363496 | 118289 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Nos | 5936.01 | 5936.01 | 6.0 | False | None | None | False | None | False | 35616.06 | 0 |
| 3363497 | 118289 | None | 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Nos | 3745.86 | 3745.86 | 4.0 | False | None | None | False | None | False | 14983.44 | 0 |
| 3363498 | 118289 | None | 14.40.2 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. | Nos | 602.83 | 602.83 | 6.0 | False | None | None | False | None | False | 3616.98 | 0 |
| 3363499 | 118289 | None | D R | KSRB 12-8.1 : Constructing brick masonry inspection chambers 455X610mm, and 450mm depth. (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 450X610mm internal dimensions. total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal, foundation concrete M15 (1:5:10) with 20mm and downsize granite metal, foundation concrete M15 with 40mm & down size granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS | Nos | 7733.72 | 7733.72 | 4.0 | False | None | None | False | None | False | 30934.88 | 0 |
| 3363500 | 118289 | None | 8.16a | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. | Sqm | 1504.66 | 1504.66 | 18.2 | False | None | None | False | None | False | 27384.812 | 0 |
| 3363501 | 118289 | None | D R | KSRB 11-18-1.1 : Providing & fixing sand cast iron soil waste & vent pipes 100mm dia with spun yarn soaked in cement slurry & cement mortar 1:2 including cost of materials, labour charges, testing as per Specification. Specification No.KBS 11-1.10, Sand CI vent pipe | m | 827.18 | 827.18 | 2.0 | False | None | None | False | None | False | 1654.36 | 0 |
| 3363502 | 118289 | None | D R | KSRB 12-1.1 : Providing and laying in position to required level or slope 100mm internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and joints, including cost of materials, labour complete as per specifications. do with 100mm dia Sw pipe | m | 264.32 | 264.32 | 2.0 | False | None | None | False | None | False | 528.64 | 0 |
| 3363503 | 118289 | None | 8.3.1 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 430.25 | 430.25 | 32.3 | False | None | None | False | None | False | 13897.075 | 0 |
| 3363504 | 118289 | None | 1.1.1 | Concealed Conduit System
SupplyingheavygaugePVCconduitpipe19/20 mmdia 2mm thick confirming to IS 2509 with suitable size bends,metal/PVC Junction boxes, adhesive paste etc.,and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18 SWG GI fish wire wherever necessary | Rmtr | 80.21 | 80.21 | 45.0 | False | None | None | False | None | False | 3609.45 | 0 |
| 3363505 | 118289 | None | 5.42.2 | Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. | Sq CM | 0.52 | 0.52 | 2000.0 | False | None | None | False | None | False | 1040.0 | 0 |
| 3363506 | 118289 | None | 5.41 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron .and M.S. Flat 50x50x6mm with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. | Rmtr | 480.08 | 480.08 | 1.0 | False | None | None | False | None | False | 480.08 | 0 |
| 3363507 | 118289 | None | 3.8 | upplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc,and fixing on existing wooden ormetal box using N.F. screws. | Sq CM | 0.49 | 0.49 | 1150.0 | False | None | None | False | None | False | 563.5 | 0 |
| 3363508 | 118289 | None | 2.3 | Wiring for lighting/power circuitusing one o FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5mm2 | Rmtr | 51.04 | 51.04 | 135.0 | False | None | None | False | None | False | 6890.4 | 0 |
| 3363509 | 118289 | None | 2.1 | Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5 Sqmm (Phase & Neutral) &1x1.0 sqmm (Earthwire) FRLS multi strand PVC insulated copper wire (confirming to IS-694:and latest amendments) with a 6 Amps flush type SP controls witch shall be fixed on the existing plastics heet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete fo reach outlet.
Using class A materials
Short point up to 3mtrs from tapping point to out let via switch | Each Point | 346.38 | 346.38 | 22.0 | False | None | None | False | None | False | 7620.36 | 0 |
| 3363510 | 118289 | None | 2.11 | Medium point a above 3mtr up to 6mtr from tapping point to out let via switch | Each Point | 480.08 | 480.08 | 4.0 | False | None | None | False | None | False | 1920.32 | 0 |
| 3363511 | 118289 | None | 2.12 | Long point a above 6mtr up to 10mtr from tapping point to out let via switch | Each Point | 692.77 | 692.77 | 3.0 | False | None | None | False | None | False | 2078.31 | 0 |
| 3363512 | 118289 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC
60898.
6-32 A DP | Nos | 898.18 | 898.18 | 1.0 | False | None | None | False | None | False | 898.18 | 0 |
| 3363513 | 118289 | None | D R | Supplying and fixing a drop light one PBBC/bakelite pendent holder,PVC insuleated twin twisted copper wire of 10/0.3mm length upto 1000 mm,one of 60/100 watts lamp of 230 volts grade and one of 5 amps bakelite ceiling rose fixed on the existing wooden block of the outlet Group- A | Nos | 142.78 | 142.78 | 4.0 | False | None | None | False | None | False | 571.12 | 0 |
| 3363514 | 118289 | None | D R | Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap rmoured cable with PVC outer sheathing 1.1 KV class.(68/4) - Class A’ PVC Cable 2 core 16 sqmm | Rmtr | 106.2 | 106.2 | 50.0 | False | None | None | False | None | False | 5310.0 | 0 |
| 3363515 | 118289 | None | D R | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. (As per Civil SR KSRB I-2, P-7).In soil(Ordinary) | Rmtr | 92.04 | 92.04 | 30.0 | False | None | None | False | None | False | 2761.2 | 0 |
| 3363516 | 118289 | None | D R | Labour charges for laying of 1.1 KV class UG cable w in existing trench GI pipe / on /wall /on pole as required. In existing trench / duct. 25 to 75 sqmm | Rmtr | 19.11 | 19.11 | 30.0 | False | None | None | False | None | False | 573.3 | 0 |
| 3363517 | 118289 | None | D R | Supplying and fixing of class A (medium duty)GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arraingements for UG cable of 1.1KV class.40mm | Rmtr | 407.1 | 407.1 | 1.0 | False | None | None | False | None | False | 407.1 | 0 |
| 3363518 | 118289 | None | 12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
| Nos | 4266.05 | 4266.05 | 1.0 | False | None | None | False | None | False | 4266.05 | 0 |
| 3363519 | 118289 | None | D R | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps,nails,guttas/spacers. GI Wire c) 8SWG | Rmtr | 23.01 | 23.01 | 10.0 | False | None | None | False | None | False | 230.1 | 0 |
| 3363520 | 118289 | None | D R | Supplying tinned copper lugs crimping and wiring to terminal point for wire of the following sizes.-35Sqmm Long Barrel | Nos | 42.15 | 42.15 | 2.0 | False | None | None | False | None | False | 84.3 | 0 |
| 3363521 | 118289 | None | D R | Supplying and fixing L.T cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts. | Nos | 427.16 | 427.16 | 3.0 | False | None | None | False | None | False | 1281.48 | 0 |
| 3363522 | 118289 | None | D R | Supplying of 2 pin /4 pi 18 CFL lamp | Nos | 141.6 | 141.6 | 25.0 | False | None | None | False | None | False | 3540.0 | 0 |