| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT HARAVI- CIVIL&WATER SUPPLY WORK(SLICE-01) | 5989407.85 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358283 | 118109 | None | 1.12, V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 29.03 | False | None | None | False | None | False | 3254.263 | 0 | | 3358284 | 118109 | None | 1.14.1, V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 172.94 | False | None | None | False | None | False | 20815.0584 | 0 | | 3358285 | 118109 | None | 1.15.1, V-1 | Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work
---- etc., complete with all lead | Cum | 428.34 | 428.34 | 14.56 | False | None | None | False | None | False | 6236.6304 | 0 | | 3358286 | 118109 | None | 1.1B, V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
---- etc., complete with all lead | Cum | 140.42 | 140.42 | 34.56 | False | None | None | False | None | False | 4852.9152 | 0 | | 3358287 | 118109 | None | 1.5.1, V-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
---- etc., complete with all lead | Cum | 352.82 | 352.82 | 34.0 | False | None | None | False | None | False | 11995.88 | 0 | | 3358288 | 118109 | None | 1.9, V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 42.0 | False | None | None | False | None | False | 13182.96 | 0 | | 3358289 | 118109 | None | 4.1, V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 110.22 | False | None | None | False | None | False | 15347.0328 | 0 | | 3358290 | 118109 | None | 1.8, V-1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
---- etc., complete with all lead | Cum | 559.32 | 559.32 | 142.53 | False | None | None | False | None | False | 79719.8796 | 0 | | 3358291 | 118109 | None | 2.1.3, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 25.92 | False | None | None | False | None | False | 183177.1584 | 0 | | 3358292 | 118109 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Concrete (Formwork,
Centering & Scaffolding Charges of 8%) ---- etc., complete with all lead | Cum | 8012.15 | 8012.15 | 37.67 | False | None | None | False | None | False | 301817.6905 | 0 | | 3358293 | 118109 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Pedestral Concrete (Formwork,
Centering & Scaffolding Charges of 10%)
---- etc., complete with all lead | Cum | 8160.53 | 8160.53 | 1.75 | False | None | None | False | None | False | 14280.9275 | 0 | | 3358294 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%) - GF
---- etc., complete with all lead | Cum | 13299.78 | 13299.78 | 6.35 | False | None | None | False | None | False | 84453.603 | 0 | | 3358295 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%)- FF ---- etc., complete with all lead | Cum | 13432.78 | 13432.78 | 3.19 | False | None | None | False | None | False | 42850.5682 | 0 | | 3358296 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam, RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%) - GF ---- etc., complete with all lead | Cum | 11735.1 | 11735.1 | 32.27 | False | None | None | False | None | False | 378691.677 | 0 | | 3358297 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%)- FF
---- etc., complete with all lead | Cum | 11852.45 | 11852.45 | 10.26 | False | None | None | False | None | False | 121606.137 | 0 | | 3358298 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam, Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- GF
---- etc., complete with all lead | Cum | 12517.44 | 12517.44 | 9.21 | False | None | None | False | None | False | 115285.6224 | 0 | | 3358299 | 118109 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam ,Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- FF
---- etc., complete with all lead | Cum | 12642.61 | 12642.61 | 6.71 | False | None | None | False | None | False | 84831.9131 | 0 | | 3358300 | 118109 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates- GF
---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 1.59 | False | None | None | False | None | False | 11664.3354 | 0 | | 3358301 | 118109 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF
---- etc., complete with all lead | Cum | 7409.42 | 7409.42 | 1.21 | False | None | None | False | None | False | 8965.3982 | 0 | | 3358302 | 118109 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - GF ---- etc., complete with all lead | Cum | 9014.65 | 9014.65 | 0.43 | False | None | None | False | None | False | 3876.2995 | 0 | | 3358303 | 118109 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF ---- etc., complete with all lead | Cum | 10743.66 | 10743.66 | 0.43 | False | None | None | False | None | False | 4619.7738 | 0 | | 3358304 | 118109 | None | Data rate -1 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). - GF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.63 | False | None | None | False | None | False | 1334.462 | 0 | | 3358305 | 118109 | None | Data Rate - 2 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).- FF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.56 | False | None | None | False | None | False | 1298.944 | 0 | | 3358306 | 118109 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.- GF
---- etc., complete with all lead | MT | 105559.26 | 105559.26 | 8.835 | False | None | None | False | None | False | 932616.0621 | 0 | | 3358307 | 118109 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- FF
---- etc., complete with all lead | MT | 106614.85 | 106614.85 | 2.02 | False | None | None | False | None | False | 215361.997 | 0 | | 3358308 | 118109 | None | Data Rate - 3 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. - GF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 27.45 | False | None | None | False | None | False | 2429.325 | 0 | | 3358309 | 118109 | None | Data Rate - 4 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge - FF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 28.4 | False | None | None | False | None | False | 2513.4 | 0 | | 3358310 | 118109 | None | 5.4, V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.04 | False | None | None | False | None | False | 60613.7208 | 0 | | 3358311 | 118109 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF
---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 141.17 | False | None | None | False | None | False | 218220.586 | 0 | | 3358312 | 118109 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 164.72 | False | None | None | False | None | False | 257170.7472 | 0 | | 3358313 | 118109 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 20.8 | False | None | None | False | None | False | 27096.576 | 0 | | 3358314 | 118109 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 36.3 | False | None | None | False | None | False | 47761.725 | 0 | | 3358315 | 118109 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.-GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.39 | False | None | None | False | None | False | 45474.663 | 0 | | 3358316 | 118109 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.- FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.16 | False | None | None | False | None | False | 18842.8352 | 0 | | 3358317 | 118109 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. - GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 6.0 | False | None | None | False | None | False | 7193.28 | 0 | | 3358318 | 118109 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.- FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3358319 | 118109 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1241.36 | 1241.36 | 6.0 | False | None | None | False | None | False | 7448.16 | 0 | | 3358320 | 118109 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-FF ---- etc., complete with all lead | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3358321 | 118109 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1168.2 | 1168.2 | 6.0 | False | None | None | False | None | False | 7009.2 | 0 | | 3358322 | 118109 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.- FF ---- etc., complete with all lead | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3358323 | 118109 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete - GF ---- etc., complete with all lead | Nos | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 | | 3358324 | 118109 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- FF ---- etc., complete with all lead | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3358325 | 118109 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -GF ---- etc., complete with all lead | Nos | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3358326 | 118109 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -FF ---- etc., complete with all lead | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3358327 | 118109 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms etc. complete - GF ---- etc., complete with all lead | Nos | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 | | 3358328 | 118109 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. etc complete - FF
---- etc., complete with all lead | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3358329 | 118109 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) -GF ---- etc., complete with all lead | Nos | 324.5 | 324.5 | 12.0 | False | None | None | False | None | False | 3894.0 | 0 | | 3358330 | 118109 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) - FF ---- etc., complete with all lead | Nos | 327.75 | 327.75 | 8.0 | False | None | None | False | None | False | 2622.0 | 0 | | 3358331 | 118109 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - GF ---- etc., complete with all lead | Nos | 70.8 | 70.8 | 36.0 | False | None | None | False | None | False | 2548.8 | 0 | | 3358332 | 118109 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - FF ---- etc., complete with all lead | Nos | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3358333 | 118109 | None | Data Rate-5 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-GF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 35.4 | False | None | None | False | None | False | 1044.3 | 0 | | 3358334 | 118109 | None | Data Rate-06 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-FF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 23.0 | False | None | None | False | None | False | 678.5 | 0 | | 3358335 | 118109 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial- GF ---- etc., complete with all lead | Sqm | 3545.9 | 3545.9 | 13.02 | False | None | None | False | None | False | 46167.618 | 0 | | 3358336 | 118109 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial-FF ---- etc., complete with all lead | Sqm | 3581.36 | 3581.36 | 7.98 | False | None | None | False | None | False | 28579.2528 | 0 | | 3358337 | 118109 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)-GF ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 11.25 | False | None | None | False | None | False | 86964.525 | 0 | | 3358338 | 118109 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 7807.48 | 7807.48 | 10.35 | False | None | None | False | None | False | 80807.418 | 0 | | 3358339 | 118109 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 0.72 | False | None | None | False | None | False | 4858.8624 | 0 | | 3358340 | 118109 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3358341 | 118109 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-GF ---- etc., complete with all lead | Kgs | 198.24 | 198.24 | 260.82 | False | None | None | False | None | False | 51704.9568 | 0 | | 3358342 | 118109 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FF ---- etc., complete with all lead | Kgs | 200.22 | 200.22 | 199.26 | False | None | None | False | None | False | 39895.8372 | 0 | | 3358343 | 118109 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-GF ---- etc., complete with all lead | Mtr | 758.74 | 758.74 | 19.8 | False | None | None | False | None | False | 15023.052 | 0 | | 3358344 | 118109 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-FF ---- etc., complete with all lead | Mtr | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3358345 | 118109 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames- GF ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 6.3 | False | None | None | False | None | False | 23818.536 | 0 | | 3358346 | 118109 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames -FF ---- etc., complete with all lead | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3358347 | 118109 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge-GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 104.03 | False | None | None | False | None | False | 25901.3894 | 0 | | 3358348 | 118109 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge-FF
---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 118.01 | False | None | None | False | None | False | 29675.9747 | 0 | | 3358349 | 118109 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 340.2 | False | None | None | False | None | False | 140101.164 | 0 | | 3358350 | 118109 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 238.84 | False | None | None | False | None | False | 99343.1096 | 0 | | 3358351 | 118109 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 441.91 | False | None | None | False | None | False | 52145.38 | 0 | | 3358352 | 118109 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 368.14 | False | None | None | False | None | False | 43874.9252 | 0 | | 3358353 | 118109 | None | 89, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-GF ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 212.74 | False | None | None | False | None | False | 96647.782 | 0 | | 3358354 | 118109 | None | 8.9, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-FF ---- etc., complete with all lead | Sqm | 458.84 | 458.84 | 215.75 | False | None | None | False | None | False | 98994.73 | 0 | | 3358355 | 118109 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 36.98 | False | None | None | False | None | False | 12872.738 | 0 | | 3358356 | 118109 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 27.87 | False | None | None | False | None | False | 9798.5346 | 0 | | 3358357 | 118109 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-GF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 535.2 | False | None | None | False | None | False | 23998.368 | 0 | | 3358358 | 118109 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-FF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 399.0 | False | None | None | False | None | False | 17891.16 | 0 | | 3358359 | 118109 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 12.24 | False | None | None | False | None | False | 8882.568 | 0 | | 3358360 | 118109 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 8.94 | False | None | None | False | None | False | 6552.6624 | 0 | | 3358361 | 118109 | None | 7.18, V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 1.2 | False | None | None | False | None | False | 2884.632 | 0 | | 3358362 | 118109 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-GF ---- etc., complete with all lead | Mtr | 61.36 | 61.36 | 238.64 | False | None | None | False | None | False | 14642.9504 | 0 | | 3358363 | 118109 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-FF ---- etc., complete with all lead | Mtr | 61.97 | 61.97 | 160.83 | False | None | None | False | None | False | 9966.6351 | 0 | | 3358364 | 118109 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 89.09 | False | None | None | False | None | False | 123523.285 | 0 | | 3358365 | 118109 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 54.78 | False | None | None | False | None | False | 76712.2686 | 0 | | 3358366 | 118109 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent-GF
---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 31.52 | False | None | None | False | None | False | 91719.4176 | 0 | | 3358367 | 118109 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FF ---- etc., complete with all lead | Sqm | 2938.98 | 2938.98 | 3.64 | False | None | None | False | None | False | 10697.8872 | 0 | | 3358368 | 118109 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 5.86 | False | None | None | False | None | False | 6147.2572 | 0 | | 3358369 | 118109 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 5.98 | False | None | None | False | None | False | 6335.8698 | 0 | | 3358370 | 118109 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-GF ---- etc., complete with all lead | Sqm | 1642.56 | 1642.56 | 36.98 | False | None | None | False | None | False | 60741.8688 | 0 | | 3358371 | 118109 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-FF ---- etc., complete with all lead | Sqm | 1658.99 | 1658.99 | 19.91 | False | None | None | False | None | False | 33030.4909 | 0 | | 3358372 | 118109 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-GF ---- etc., complete with all lead | Sqm | 416.54 | 416.54 | 26.42 | False | None | None | False | None | False | 11004.9868 | 0 | | 3358373 | 118109 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-FF ---- etc., complete with all lead | Sqm | 420.71 | 420.71 | 33.85 | False | None | None | False | None | False | 14241.0335 | 0 | | 3358374 | 118109 | None | 11.28, V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc., complete with all lead | Kgs | 666.7 | 666.7 | 172.8 | False | None | None | False | None | False | 115205.76 | 0 | | 3358375 | 118109 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 441.91 | False | None | None | False | None | False | 57359.918 | 0 | | 3358376 | 118109 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 131.1 | 131.1 | 250.13 | False | None | None | False | None | False | 32792.043 | 0 | | 3358377 | 118109 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 196.14 | False | None | None | False | None | False | 36105.4512 | 0 | | 3358378 | 118109 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 215.75 | False | None | None | False | None | False | 40112.24 | 0 | | 3358379 | 118109 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 12.42 | False | None | None | False | None | False | 732.78 | 0 | | 3358380 | 118109 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 11.07 | False | None | None | False | None | False | 659.6613 | 0 | | 3358381 | 118109 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 12.42 | False | None | None | False | None | False | 1685.394 | 0 | | 3358382 | 118109 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 11.07 | False | None | None | False | None | False | 1517.2542 | 0 | | 3358383 | 118109 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 35.71 | False | None | None | False | None | False | 2233.3034 | 0 | | 3358384 | 118109 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 21.89 | False | None | None | False | None | False | 1382.7913 | 0 | | 3358385 | 118109 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 159.3 | 159.3 | 35.71 | False | None | None | False | None | False | 5688.603 | 0 | | 3358386 | 118109 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 160.89 | 160.89 | 21.89 | False | None | None | False | None | False | 3521.8821 | 0 | | 3358387 | 118109 | None | 15.1, V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge- FF ---- etc., complete with all lead | Sqm | 973.7 | 973.7 | 99.0 | False | None | None | False | None | False | 96396.3 | 0 | | 3358388 | 118109 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-GF ---- etc., complete with all lead | Mtr | 343.38 | 343.38 | 25.0 | False | None | None | False | None | False | 8584.5 | 0 | | 3358389 | 118109 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-FF
---- etc., complete with all lead | Mtr | 346.81 | 346.81 | 30.0 | False | None | None | False | None | False | 10404.3 | 0 | | 3358390 | 118109 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 10.0 | False | None | None | False | None | False | 1085.6 | 0 | | 3358391 | 118109 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead | Mtr | 109.65 | 109.65 | 10.0 | False | None | None | False | None | False | 1096.5 | 0 | | 3358392 | 118109 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of a000000pproved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.62 | 164.62 | 10.0 | False | None | None | False | None | False | 1646.2 | 0 | | 3358393 | 118109 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358394 | 118109 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.02 | 164.02 | 10.0 | False | None | None | False | None | False | 1640.2 | 0 | | 3358395 | 118109 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358396 | 118109 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 259.6 | 259.6 | 55.0 | False | None | None | False | None | False | 14278.0 | 0 | | 3358397 | 118109 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 262.2 | 262.2 | 20.0 | False | None | None | False | None | False | 5244.0 | 0 | | 3358398 | 118109 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 484.98 | 484.98 | 47.0 | False | None | None | False | None | False | 22794.06 | 0 | | 3358399 | 118109 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 489.83 | 489.83 | 30.0 | False | None | None | False | None | False | 14694.9 | 0 | | 3358400 | 118109 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - GF ---- etc., complete with all lead | Nos | 1439.6 | 1439.6 | 3.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3358401 | 118109 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF ---- etc., complete with all lead | Nos | 1454.0 | 1454.0 | 2.0 | False | None | None | False | None | False | 2908.0 | 0 | | 3358402 | 118109 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 1.0 | False | None | None | False | None | False | 329.22 | 0 | | 3358403 | 118109 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 2.0 | False | None | None | False | None | False | 665.02 | 0 | | 3358404 | 118109 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - GF ---- etc., complete with all lead | Nos | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3358405 | 118109 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - FF ---- etc., complete with all lead | Nos | 6628.79 | 6628.79 | 2.0 | False | None | None | False | None | False | 13257.58 | 0 | | 3358406 | 118109 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. - GF ---- etc., complete with all lead | Nos | 585.28 | 585.28 | 3.0 | False | None | None | False | None | False | 1755.84 | 0 | | 3358407 | 118109 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- FF ---- etc., complete with all lead | Nos | 591.13 | 591.13 | 2.0 | False | None | None | False | None | False | 1182.26 | 0 | | 3358408 | 118109 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - GF ---- etc., complete with all lead | Nos | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3358409 | 118109 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF ---- etc., complete with all lead | Nos | 7123.39 | 7123.39 | 1.0 | False | None | None | False | None | False | 7123.39 | 0 | | 3358410 | 118109 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - GF ---- etc., complete with all lead | Each | 4185.46 | 4185.46 | 1.0 | False | None | None | False | None | False | 4185.46 | 0 | | 3358411 | 118109 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - FF ---- etc., complete with all lead | Each | 4227.31 | 4227.31 | 1.0 | False | None | None | False | None | False | 4227.31 | 0 | | 3358412 | 118109 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF ---- etc., complete with all lead | Nos | 5255.72 | 5255.72 | 1.0 | False | None | None | False | None | False | 5255.72 | 0 | | 3358413 | 118109 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - FF ---- etc., complete with all lead | Nos | 5308.28 | 5308.28 | 1.0 | False | None | None | False | None | False | 5308.28 | 0 | | 3358414 | 118109 | None | V-2 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm - GF ---- etc., complete with all lead | Nos | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3358415 | 118109 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - GF ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 2.0 | False | None | None | False | None | False | 705.64 | 0 | | 3358416 | 118109 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - FF ---- etc., complete with all lead | Nos | 356.24 | 356.24 | 2.0 | False | None | None | False | None | False | 712.48 | 0 | | 3358417 | 118109 | None | V-2 14.10.1.4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead | Nos | 5758.78 | 5758.78 | 1.0 | False | None | None | False | None | False | 5758.78 | 0 | | 3358418 | 118109 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF ---- etc., complete with all lead | Nos | 3636.76 | 3636.76 | 3.0 | False | None | None | False | None | False | 10910.28 | 0 | | 3358419 | 118109 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - FF ---- etc., complete with all lead | Nos | 3673.13 | 3673.13 | 2.0 | False | None | None | False | None | False | 7346.26 | 0 | | 3358420 | 118109 | None | V-2 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 | | 3358421 | 118109 | None | V-2 13.33.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 256.06 | 256.06 | 20.0 | False | None | None | False | None | False | 5121.2 | 0 | | 3358422 | 118109 | None | V-2 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 562.86 | 562.86 | 50.0 | False | None | None | False | None | False | 28143.0 | 0 | | 3358423 | 118109 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 364.62 | 364.62 | 10.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3358424 | 118109 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 368.27 | 368.27 | 15.0 | False | None | None | False | None | False | 5524.05 | 0 | | 3358425 | 118109 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 | | 3358426 | 118109 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 451.69 | 451.69 | 50.0 | False | None | None | False | None | False | 22584.5 | 0 | | 3358427 | 118109 | None | V-2 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 568.49 | 568.49 | 20.0 | False | None | None | False | None | False | 11369.8 | 0 | | 3358428 | 118109 | None | V-2 13.4.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - GF ---- etc., complete with all lead | Each | 337.48 | 337.48 | 3.0 | False | None | None | False | None | False | 1012.44 | 0 | | 3358429 | 118109 | None | V-2 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - FF ---- etc., complete with all lead | Each | 340.85 | 340.85 | 2.0 | False | None | None | False | None | False | 681.7 | 0 | | 3358430 | 118109 | None | V-2 739 | Providing and fixing 20mm thick grey granite,.For Urinals partition - GF ---- etc., complete with all lead | Sqm | 1121.0 | 1121.0 | 5.0 | False | None | None | False | None | False | 5605.0 | 0 | | 3358431 | 118109 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 10.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3358432 | 118109 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - FF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 3358433 | 118109 | None | Data Rate-07 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 6.0 | False | None | None | False | None | False | 927.48 | 0 | | 3358434 | 118109 | None | Data Rate-08 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 6.0 | False | None | None | False | None | False | 1111.56 | 0 | | 3358435 | 118109 | None | Data Rate-09 | Air Vent Cowel 75mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 10.0 | False | None | None | False | None | False | 4130.0 | 0 | | 3358436 | 118109 | None | Data Rate-10 | Air Vent Cowel 110mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 10.0 | False | None | None | False | None | False | 5900.0 | 0 | | 3358437 | 118109 | None | Data Rate-11 | Supplying and fixing Counter basin consisting of s GF Toilet & FF Toilet. complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 5664.0 | 5664.0 | 5.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3358438 | 118109 | None | Data Rate-12 | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 | | 3358439 | 118109 | None | Data Rate-13 | Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confiMing to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 1996.56 | 1996.56 | 2.0 | False | None | None | False | None | False | 3993.12 | 0 | | 3358440 | 118109 | None | Data Rate-14 | Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick confoMed to IS 1239 etc., complete as directed by the engineer Incharge. ---- etc., complete with all lead | Nos | 767.0 | 767.0 | 10.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3358441 | 118109 | None | Data Rate-15 | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 3540.0 | 3540.0 | 2.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358442 | 118109 | None | V-5 10.2.4 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead | Mtr | 679.68 | 679.68 | 50.0 | False | None | None | False | None | False | 33984.0 | 0 | | 3358443 | 118109 | None | V-5 10.2.5 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 200mm dia. ---- etc., complete with all lead | Mtr | 980.58 | 980.58 | 10.0 | False | None | None | False | None | False | 9805.8 | 0 | | 3358444 | 118109 | None | V-5 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete with all lead | Nos | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 3358445 | 118109 | None | V-2 13.58 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).10cms x 10cms ---- etc., complete with all lead | Nos | 408.28 | 408.28 | 4.0 | False | None | None | False | None | False | 1633.12 | 0 | | 3358446 | 118109 | None | V-2 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead | Nos | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3358447 | 118109 | None | V-2 6.3 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- etc., complete with all lead | Cum | 10471.32 | 10471.32 | 5.3 | False | None | None | False | None | False | 55497.996 | 0 | | 3358448 | 118109 | None | V-2 2.3.1 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid Seperately) ---- etc., complete with all lead | Cum | 8207.25 | 8207.25 | 11.75 | False | None | None | False | None | False | 96435.1875 | 0 | | 3358449 | 118109 | None | 15.24 2018-19 | KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead | Sqm | 5.9 | 5.9 | 16.6 | False | None | None | False | None | False | 97.94 | 0 | | 3358450 | 118109 | None | Data Rate-16 | Providing and fixing M.S.steel cover for tank opening including materials, labour etc., complete. ---- etc., complete with all lead | Nos | 1770.0 | 1770.0 | 4.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358451 | 118109 | None | V-2 137 | Providing and Filling of Brick bats 25 to 100 mm Soak Pit etc. complete as per directions of the Engineer-in charge ---- etc., complete with all lead | Cum | 944.0 | 944.0 | 3.5 | False | None | None | False | None | False | 3304.0 | 0 | | 3358452 | 118109 | None | V-2 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 13.5 | False | None | None | False | None | False | 38646.18 | 0 | | 3358453 | 118109 | None | V-2 19.7.1 | Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 47.27 | False | None | None | False | None | False | 26885.2852 | 0 | | 3358454 | 118109 | None | V-2 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 26.64 | False | None | None | False | None | False | 7544.448 | 0 | | 3358455 | 118109 | None | V-2 19.51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Unit | 647.82 | 647.82 | 5.0 | False | None | None | False | None | False | 3239.1 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT HARAVI- ELECTRICAL WORK (SLICE-02) | 446049.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358456 | 118110 | None | 2.2.1, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point upto 3 Mtr from tapping point to out let via switch ---- etc., complete with all lead | Each | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3358457 | 118110 | None | 2.2.2, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3 Mtr upto 6Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3358458 | 118110 | None | 2.2.3, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.c) Long point above 6mtr upto 10Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 654.9 | 654.9 | 15.0 | False | None | None | False | None | False | 9823.5 | 0 | | 3358459 | 118110 | None | 3.4.2, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3 Way
---- etc., complete with all lead | Each | 187.62 | 187.62 | 21.0 | False | None | None | False | None | False | 3940.02 | 0 | | 3358460 | 118110 | None | 3.4.3, V-2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 4-5Way
---- etc., complete with all lead | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3358461 | 118110 | None | 3.4.4, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6Way
---- etc., complete with all lead | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3358462 | 118110 | None | 3.4.5, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3358463 | 118110 | None | 3.4.6, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3358464 | 118110 | None | 3.5.2, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module
---- etc., complete with all lead | Each | 189.98 | 189.98 | 21.0 | False | None | None | False | None | False | 3989.58 | 0 | | 3358465 | 118110 | None | 3.5.3, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4-5 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3358466 | 118110 | None | 3.5.4, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358467 | 118110 | None | 3.5.5, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3358468 | 118110 | None | 3.5.6, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3358469 | 118110 | None | 3.6.1, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps one way. ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 3358470 | 118110 | None | 3.6.2, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3358471 | 118110 | None | 3.6.3, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps 3way socket. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3358472 | 118110 | None | 3.6.9, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Bell push ---- etc., complete with all lead | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3358473 | 118110 | None | 3.6.4, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3358474 | 118110 | None | 3.6.10, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3358475 | 118110 | None | 3.6.11, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3358476 | 118110 | None | 3.6.12, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358477 | 118110 | None | 12.2.1, V-6 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.-Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3358478 | 118110 | None | 1.13, V-6 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | Nos | 192.34 | 192.34 | 12.0 | False | None | None | False | None | False | 2308.08 | 0 | | 3358479 | 118110 | None | 1.2.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 320.0 | False | None | None | False | None | False | 24921.6 | 0 | | 3358480 | 118110 | None | 1.2.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3358481 | 118110 | None | 1.3.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-19/20mm dia 2mm thick
---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 110.0 | False | None | None | False | None | False | 8826.4 | 0 | | 3358482 | 118110 | None | 1.3.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-25mm dia 2mm thick
---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 95.0 | False | None | None | False | None | False | 8855.9 | 0 | | 3358483 | 118110 | None | 2.3.2, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-1.5 sqmm ---- etc., complete with all lead | Mtr | 30.68 | 30.68 | 125.0 | False | None | None | False | None | False | 3835.0 | 0 | | 3358484 | 118110 | None | 2.3.3, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-2.5 sqmm ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3358485 | 118110 | None | 2.3.4, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-4 sqmm ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 380.0 | False | None | None | False | None | False | 28249.2 | 0 | | 3358486 | 118110 | None | 5.19.9, V-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure- II- Double Door-12 Way SP & N
---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3358487 | 118110 | None | 5.18.1, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 etc.-6-32Amps SP
---- etc., complete with all lead | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3358488 | 118110 | None | 5.20.1, V-6 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3358489 | 118110 | None | 32.03, BSR-32 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 4 core 10 sqmm ---- etc., complete with all lead | Km | 175362.16 | 175362.16 | 0.1 | False | None | None | False | None | False | 17536.216 | 0 | | 3358490 | 118110 | None | 31.05, BSR -31 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 19067.62 | 19067.62 | 0.1 | False | None | None | False | None | False | 1906.762 | 0 | | 3358491 | 118110 | None | 6.6.2, Ele SR-2019-20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.-In soil (hard)
---- etc., complete with all lead | Mtr | 120.36 | 120.36 | 20.0 | False | None | None | False | None | False | 2407.2 | 0 | | 3358492 | 118110 | None | 6.9.1- V-6 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.-40mm
---- etc., complete with all lead | Mtr | 395.3 | 395.3 | 5.0 | False | None | None | False | None | False | 1976.5 | 0 | | 3358493 | 118110 | None | 12.56, V-6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.
---- etc., complete with all lead | Nos | 4141.8 | 4141.8 | 2.0 | False | None | None | False | None | False | 8283.6 | 0 | | 3358494 | 118110 | None | 12.58.1, V-6 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 45.0 | False | None | None | False | None | False | 4354.2 | 0 | | 3358495 | 118110 | None | 11.3.1, V-6 | Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition- LED light fighting 1 x4- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3358496 | 118110 | None | 11.5.2, V-6 | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED square or round down light 10-12W
---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3358497 | 118110 | None | 11.11.3, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3358498 | 118110 | None | 11.11.7, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- etc., complete with all lead | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3358499 | 118110 | None | 11.8.2, V-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 40watts
---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3358500 | 118110 | None | 12.27, V-6 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Nos | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3358501 | 118110 | None | 6.1, V-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3358502 | 118110 | None | 6.3.1, V-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.-48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3358503 | 118110 | None | 12.46, V-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin. ---- etc., complete with all lead | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3358504 | 118110 | None | 13.7.1, V-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3358505 | 118110 | None | 13.11, V-6 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- etc., complete with all lead | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3358506 | 118110 | None | 13.13, V-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3358507 | 118110 | None | 13.4.1, V-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.-Single bracket 1.5 Mtr. Length
---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3358508 | 118110 | None | 13.5, V-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc., complete with all lead | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3358509 | 118110 | None | 5.42.2, V-6 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete-16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 3358510 | 118110 | None | 5.40.1, V-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.-100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3358511 | 118110 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -40x40x6mm ---- etc., complete with all lead | Mtr | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3358512 | 118110 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -50x100x50x6mm C channel ---- etc., complete with all lead | Mtr | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3358513 | 118110 | None | 5.15.9, V-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR POLE-100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3358514 | 118110 | None | 5.18.4, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898- 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3358515 | 118110 | None | 5.18.9, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-50-63Amps TPN ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3358516 | 118110 | None | 5.7.2, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-32Amps
---- etc., complete with all lead | Each | 185.26 | 185.26 | 3.0 | False | None | None | False | None | False | 555.78 | 0 | | 3358517 | 118110 | None | 5.7.3, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-63Amps
---- etc., complete with all lead | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3358518 | 118110 | None | 5.12.1, V-6 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-63Amps ---- etc., complete with all lead | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3358519 | 118110 | None | 5.27, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- etc., complete with all lead | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3358520 | 118110 | None | 5.28, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- etc., complete with all lead | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3358521 | 118110 | None | 5.29, V-6 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
---- etc., complete with all lead | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3358522 | 118110 | None | 5.38, V-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 12/24v D.C
---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3358523 | 118110 | None | 5.34, V-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3358524 | 118110 | None | 5.30, V-6 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 2.0 | False | None | None | False | None | False | 3256.8 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT MAREMBIDA - CIVIL & WATER SUPPLY WORK (SLICE-03) | 5988352.26 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358525 | 118111 | None | 1.12, V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 29.03 | False | None | None | False | None | False | 3254.263 | 0 | | 3358526 | 118111 | None | 1.14.1, V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 172.94 | False | None | None | False | None | False | 20815.0584 | 0 | | 3358527 | 118111 | None | 1.15.1, V-1 | Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work
---- etc., complete with all lead | Cum | 428.34 | 428.34 | 14.56 | False | None | None | False | None | False | 6236.6304 | 0 | | 3358528 | 118111 | None | 1.1B, V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
---- etc., complete with all lead | Cum | 140.42 | 140.42 | 34.56 | False | None | None | False | None | False | 4852.9152 | 0 | | 3358529 | 118111 | None | 1.5.1, V-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
---- etc., complete with all lead | Cum | 352.82 | 352.82 | 34.0 | False | None | None | False | None | False | 11995.88 | 0 | | 3358530 | 118111 | None | 1.9, V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 42.0 | False | None | None | False | None | False | 13182.96 | 0 | | 3358531 | 118111 | None | 4.1, V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 110.22 | False | None | None | False | None | False | 15347.0328 | 0 | | 3358532 | 118111 | None | 1.8, V-1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
---- etc., complete with all lead | Cum | 559.32 | 559.32 | 142.53 | False | None | None | False | None | False | 79719.8796 | 0 | | 3358533 | 118111 | None | 2.1.3, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 25.92 | False | None | None | False | None | False | 183177.1584 | 0 | | 3358534 | 118111 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Concrete (Formwork,
Centering & Scaffolding Charges of 8%) ---- etc., complete with all lead | Cum | 8012.15 | 8012.15 | 37.67 | False | None | None | False | None | False | 301817.6905 | 0 | | 3358535 | 118111 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Pedestral Concrete (Formwork,
Centering & Scaffolding Charges of 10%)
---- etc., complete with all lead | Cum | 8160.53 | 8160.53 | 1.75 | False | None | None | False | None | False | 14280.9275 | 0 | | 3358536 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%) - GF
---- etc., complete with all lead | Cum | 13299.78 | 13299.78 | 6.35 | False | None | None | False | None | False | 84453.603 | 0 | | 3358537 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%)- FF ---- etc., complete with all lead | Cum | 13432.78 | 13432.78 | 3.19 | False | None | None | False | None | False | 42850.5682 | 0 | | 3358538 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam, RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%) - GF ---- etc., complete with all lead | Cum | 11735.1 | 11735.1 | 32.27 | False | None | None | False | None | False | 378691.677 | 0 | | 3358539 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%)- FF
---- etc., complete with all lead | Cum | 11852.45 | 11852.45 | 10.26 | False | None | None | False | None | False | 121606.137 | 0 | | 3358540 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam, Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- GF
---- etc., complete with all lead | Cum | 12517.44 | 12517.44 | 9.21 | False | None | None | False | None | False | 115285.6224 | 0 | | 3358541 | 118111 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam ,Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- FF
---- etc., complete with all lead | Cum | 12642.61 | 12642.61 | 6.71 | False | None | None | False | None | False | 84831.9131 | 0 | | 3358542 | 118111 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates- GF
---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 1.59 | False | None | None | False | None | False | 11664.3354 | 0 | | 3358543 | 118111 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF
---- etc., complete with all lead | Cum | 7409.42 | 7409.42 | 1.21 | False | None | None | False | None | False | 8965.3982 | 0 | | 3358544 | 118111 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - GF ---- etc., complete with all lead | Cum | 9014.65 | 9014.65 | 0.43 | False | None | None | False | None | False | 3876.2995 | 0 | | 3358545 | 118111 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF ---- etc., complete with all lead | Cum | 10743.66 | 10743.66 | 0.43 | False | None | None | False | None | False | 4619.7738 | 0 | | 3358546 | 118111 | None | Data rate -1 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). - GF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.63 | False | None | None | False | None | False | 1334.462 | 0 | | 3358547 | 118111 | None | Data Rate - 2 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).- FF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.56 | False | None | None | False | None | False | 1298.944 | 0 | | 3358548 | 118111 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.- GF
---- etc., complete with all lead | MT | 105559.26 | 105559.26 | 8.825 | False | None | None | False | None | False | 931560.4695 | 0 | | 3358549 | 118111 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- FF
---- etc., complete with all lead | MT | 106614.85 | 106614.85 | 2.02 | False | None | None | False | None | False | 215361.997 | 0 | | 3358550 | 118111 | None | Data Rate - 3 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. - GF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 27.45 | False | None | None | False | None | False | 2429.325 | 0 | | 3358551 | 118111 | None | Data Rate - 4 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge - FF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 28.4 | False | None | None | False | None | False | 2513.4 | 0 | | 3358552 | 118111 | None | 5.4, V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.04 | False | None | None | False | None | False | 60613.7208 | 0 | | 3358553 | 118111 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF
---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 141.17 | False | None | None | False | None | False | 218220.586 | 0 | | 3358554 | 118111 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 164.72 | False | None | None | False | None | False | 257170.7472 | 0 | | 3358555 | 118111 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 20.8 | False | None | None | False | None | False | 27096.576 | 0 | | 3358556 | 118111 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 36.3 | False | None | None | False | None | False | 47761.725 | 0 | | 3358557 | 118111 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.-GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.39 | False | None | None | False | None | False | 45474.663 | 0 | | 3358558 | 118111 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.- FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.16 | False | None | None | False | None | False | 18842.8352 | 0 | | 3358559 | 118111 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. - GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 6.0 | False | None | None | False | None | False | 7193.28 | 0 | | 3358560 | 118111 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.- FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3358561 | 118111 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1241.36 | 1241.36 | 6.0 | False | None | None | False | None | False | 7448.16 | 0 | | 3358562 | 118111 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-FF ---- etc., complete with all lead | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3358563 | 118111 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1168.2 | 1168.2 | 6.0 | False | None | None | False | None | False | 7009.2 | 0 | | 3358564 | 118111 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.- FF ---- etc., complete with all lead | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3358565 | 118111 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete - GF ---- etc., complete with all lead | Nos | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 | | 3358566 | 118111 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- FF ---- etc., complete with all lead | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3358567 | 118111 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -GF ---- etc., complete with all lead | Nos | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3358568 | 118111 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -FF ---- etc., complete with all lead | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3358569 | 118111 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms etc. complete - GF ---- etc., complete with all lead | Nos | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 | | 3358570 | 118111 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. etc complete - FF
---- etc., complete with all lead | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3358571 | 118111 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) -GF ---- etc., complete with all lead | Nos | 324.5 | 324.5 | 12.0 | False | None | None | False | None | False | 3894.0 | 0 | | 3358572 | 118111 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) - FF ---- etc., complete with all lead | Nos | 327.75 | 327.75 | 8.0 | False | None | None | False | None | False | 2622.0 | 0 | | 3358573 | 118111 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - GF ---- etc., complete with all lead | Nos | 70.8 | 70.8 | 36.0 | False | None | None | False | None | False | 2548.8 | 0 | | 3358574 | 118111 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - FF ---- etc., complete with all lead | Nos | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3358575 | 118111 | None | Data Rate-5 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-GF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 35.4 | False | None | None | False | None | False | 1044.3 | 0 | | 3358576 | 118111 | None | Data Rate-06 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-FF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 23.0 | False | None | None | False | None | False | 678.5 | 0 | | 3358577 | 118111 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial- GF ---- etc., complete with all lead | Sqm | 3545.9 | 3545.9 | 13.02 | False | None | None | False | None | False | 46167.618 | 0 | | 3358578 | 118111 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial-FF ---- etc., complete with all lead | Sqm | 3581.36 | 3581.36 | 7.98 | False | None | None | False | None | False | 28579.2528 | 0 | | 3358579 | 118111 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)-GF ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 11.25 | False | None | None | False | None | False | 86964.525 | 0 | | 3358580 | 118111 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 7807.48 | 7807.48 | 10.35 | False | None | None | False | None | False | 80807.418 | 0 | | 3358581 | 118111 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 0.72 | False | None | None | False | None | False | 4858.8624 | 0 | | 3358582 | 118111 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3358583 | 118111 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-GF ---- etc., complete with all lead | Kgs | 198.24 | 198.24 | 260.82 | False | None | None | False | None | False | 51704.9568 | 0 | | 3358584 | 118111 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FF ---- etc., complete with all lead | Kgs | 200.22 | 200.22 | 199.26 | False | None | None | False | None | False | 39895.8372 | 0 | | 3358585 | 118111 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-GF ---- etc., complete with all lead | Mtr | 758.74 | 758.74 | 19.8 | False | None | None | False | None | False | 15023.052 | 0 | | 3358586 | 118111 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-FF ---- etc., complete with all lead | Mtr | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3358587 | 118111 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames- GF ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 6.3 | False | None | None | False | None | False | 23818.536 | 0 | | 3358588 | 118111 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames -FF ---- etc., complete with all lead | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3358589 | 118111 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge-GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 104.03 | False | None | None | False | None | False | 25901.3894 | 0 | | 3358590 | 118111 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge-FF
---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 118.01 | False | None | None | False | None | False | 29675.9747 | 0 | | 3358591 | 118111 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 340.2 | False | None | None | False | None | False | 140101.164 | 0 | | 3358592 | 118111 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 238.84 | False | None | None | False | None | False | 99343.1096 | 0 | | 3358593 | 118111 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 441.91 | False | None | None | False | None | False | 52145.38 | 0 | | 3358594 | 118111 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 368.14 | False | None | None | False | None | False | 43874.9252 | 0 | | 3358595 | 118111 | None | 89, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-GF ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 212.74 | False | None | None | False | None | False | 96647.782 | 0 | | 3358596 | 118111 | None | 8.9, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-FF ---- etc., complete with all lead | Sqm | 458.84 | 458.84 | 215.75 | False | None | None | False | None | False | 98994.73 | 0 | | 3358597 | 118111 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 36.98 | False | None | None | False | None | False | 12872.738 | 0 | | 3358598 | 118111 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 27.87 | False | None | None | False | None | False | 9798.5346 | 0 | | 3358599 | 118111 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-GF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 535.2 | False | None | None | False | None | False | 23998.368 | 0 | | 3358600 | 118111 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-FF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 399.0 | False | None | None | False | None | False | 17891.16 | 0 | | 3358601 | 118111 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 12.24 | False | None | None | False | None | False | 8882.568 | 0 | | 3358602 | 118111 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 8.94 | False | None | None | False | None | False | 6552.6624 | 0 | | 3358603 | 118111 | None | 7.18, V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 1.2 | False | None | None | False | None | False | 2884.632 | 0 | | 3358604 | 118111 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-GF ---- etc., complete with all lead | Mtr | 61.36 | 61.36 | 238.64 | False | None | None | False | None | False | 14642.9504 | 0 | | 3358605 | 118111 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-FF ---- etc., complete with all lead | Mtr | 61.97 | 61.97 | 160.83 | False | None | None | False | None | False | 9966.6351 | 0 | | 3358606 | 118111 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 89.09 | False | None | None | False | None | False | 123523.285 | 0 | | 3358607 | 118111 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 54.78 | False | None | None | False | None | False | 76712.2686 | 0 | | 3358608 | 118111 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent-GF
---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 31.52 | False | None | None | False | None | False | 91719.4176 | 0 | | 3358609 | 118111 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FF ---- etc., complete with all lead | Sqm | 2938.98 | 2938.98 | 3.64 | False | None | None | False | None | False | 10697.8872 | 0 | | 3358610 | 118111 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 5.86 | False | None | None | False | None | False | 6147.2572 | 0 | | 3358611 | 118111 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 5.98 | False | None | None | False | None | False | 6335.8698 | 0 | | 3358612 | 118111 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-GF ---- etc., complete with all lead | Sqm | 1642.56 | 1642.56 | 36.98 | False | None | None | False | None | False | 60741.8688 | 0 | | 3358613 | 118111 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-FF ---- etc., complete with all lead | Sqm | 1658.99 | 1658.99 | 19.91 | False | None | None | False | None | False | 33030.4909 | 0 | | 3358614 | 118111 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-GF ---- etc., complete with all lead | Sqm | 416.54 | 416.54 | 26.42 | False | None | None | False | None | False | 11004.9868 | 0 | | 3358615 | 118111 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-FF ---- etc., complete with all lead | Sqm | 420.71 | 420.71 | 33.85 | False | None | None | False | None | False | 14241.0335 | 0 | | 3358616 | 118111 | None | 11.28, V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc., complete with all lead | Kgs | 666.7 | 666.7 | 172.8 | False | None | None | False | None | False | 115205.76 | 0 | | 3358617 | 118111 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 441.91 | False | None | None | False | None | False | 57359.918 | 0 | | 3358618 | 118111 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 131.1 | 131.1 | 250.13 | False | None | None | False | None | False | 32792.043 | 0 | | 3358619 | 118111 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 196.14 | False | None | None | False | None | False | 36105.4512 | 0 | | 3358620 | 118111 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 215.75 | False | None | None | False | None | False | 40112.24 | 0 | | 3358621 | 118111 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 12.42 | False | None | None | False | None | False | 732.78 | 0 | | 3358622 | 118111 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 11.07 | False | None | None | False | None | False | 659.6613 | 0 | | 3358623 | 118111 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 12.42 | False | None | None | False | None | False | 1685.394 | 0 | | 3358624 | 118111 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 11.07 | False | None | None | False | None | False | 1517.2542 | 0 | | 3358625 | 118111 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 35.71 | False | None | None | False | None | False | 2233.3034 | 0 | | 3358626 | 118111 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 21.89 | False | None | None | False | None | False | 1382.7913 | 0 | | 3358627 | 118111 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 159.3 | 159.3 | 35.71 | False | None | None | False | None | False | 5688.603 | 0 | | 3358628 | 118111 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 160.89 | 160.89 | 21.89 | False | None | None | False | None | False | 3521.8821 | 0 | | 3358629 | 118111 | None | 15.1, V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge- FF ---- etc., complete with all lead | Sqm | 973.7 | 973.7 | 99.0 | False | None | None | False | None | False | 96396.3 | 0 | | 3358630 | 118111 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-GF ---- etc., complete with all lead | Mtr | 343.38 | 343.38 | 25.0 | False | None | None | False | None | False | 8584.5 | 0 | | 3358631 | 118111 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-FF
---- etc., complete with all lead | Mtr | 346.81 | 346.81 | 30.0 | False | None | None | False | None | False | 10404.3 | 0 | | 3358632 | 118111 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 10.0 | False | None | None | False | None | False | 1085.6 | 0 | | 3358633 | 118111 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead | Mtr | 109.65 | 109.65 | 10.0 | False | None | None | False | None | False | 1096.5 | 0 | | 3358634 | 118111 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of a000000pproved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.62 | 164.62 | 10.0 | False | None | None | False | None | False | 1646.2 | 0 | | 3358635 | 118111 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358636 | 118111 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.02 | 164.02 | 10.0 | False | None | None | False | None | False | 1640.2 | 0 | | 3358637 | 118111 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358638 | 118111 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 259.6 | 259.6 | 55.0 | False | None | None | False | None | False | 14278.0 | 0 | | 3358639 | 118111 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 262.2 | 262.2 | 20.0 | False | None | None | False | None | False | 5244.0 | 0 | | 3358640 | 118111 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 484.98 | 484.98 | 47.0 | False | None | None | False | None | False | 22794.06 | 0 | | 3358641 | 118111 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 489.83 | 489.83 | 30.0 | False | None | None | False | None | False | 14694.9 | 0 | | 3358642 | 118111 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - GF ---- etc., complete with all lead | Nos | 1439.6 | 1439.6 | 3.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3358643 | 118111 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF ---- etc., complete with all lead | Nos | 1454.0 | 1454.0 | 2.0 | False | None | None | False | None | False | 2908.0 | 0 | | 3358644 | 118111 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 1.0 | False | None | None | False | None | False | 329.22 | 0 | | 3358645 | 118111 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 2.0 | False | None | None | False | None | False | 665.02 | 0 | | 3358646 | 118111 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - GF ---- etc., complete with all lead | Nos | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3358647 | 118111 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - FF ---- etc., complete with all lead | Nos | 6628.79 | 6628.79 | 2.0 | False | None | None | False | None | False | 13257.58 | 0 | | 3358648 | 118111 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. - GF ---- etc., complete with all lead | Nos | 585.28 | 585.28 | 3.0 | False | None | None | False | None | False | 1755.84 | 0 | | 3358649 | 118111 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- FF ---- etc., complete with all lead | Nos | 591.13 | 591.13 | 2.0 | False | None | None | False | None | False | 1182.26 | 0 | | 3358650 | 118111 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - GF ---- etc., complete with all lead | Nos | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3358651 | 118111 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF ---- etc., complete with all lead | Nos | 7123.39 | 7123.39 | 1.0 | False | None | None | False | None | False | 7123.39 | 0 | | 3358652 | 118111 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - GF ---- etc., complete with all lead | Each | 4185.46 | 4185.46 | 1.0 | False | None | None | False | None | False | 4185.46 | 0 | | 3358653 | 118111 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - FF ---- etc., complete with all lead | Each | 4227.31 | 4227.31 | 1.0 | False | None | None | False | None | False | 4227.31 | 0 | | 3358654 | 118111 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF ---- etc., complete with all lead | Nos | 5255.72 | 5255.72 | 1.0 | False | None | None | False | None | False | 5255.72 | 0 | | 3358655 | 118111 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - FF ---- etc., complete with all lead | Nos | 5308.28 | 5308.28 | 1.0 | False | None | None | False | None | False | 5308.28 | 0 | | 3358656 | 118111 | None | V-2 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm - GF ---- etc., complete with all lead | Nos | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3358657 | 118111 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - GF ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 2.0 | False | None | None | False | None | False | 705.64 | 0 | | 3358658 | 118111 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - FF ---- etc., complete with all lead | Nos | 356.24 | 356.24 | 2.0 | False | None | None | False | None | False | 712.48 | 0 | | 3358659 | 118111 | None | V-2 14.10.1.4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead | Nos | 5758.78 | 5758.78 | 1.0 | False | None | None | False | None | False | 5758.78 | 0 | | 3358660 | 118111 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF ---- etc., complete with all lead | Nos | 3636.76 | 3636.76 | 3.0 | False | None | None | False | None | False | 10910.28 | 0 | | 3358661 | 118111 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - FF ---- etc., complete with all lead | Nos | 3673.13 | 3673.13 | 2.0 | False | None | None | False | None | False | 7346.26 | 0 | | 3358662 | 118111 | None | V-2 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 | | 3358663 | 118111 | None | V-2 13.33.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 256.06 | 256.06 | 20.0 | False | None | None | False | None | False | 5121.2 | 0 | | 3358664 | 118111 | None | V-2 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 562.86 | 562.86 | 50.0 | False | None | None | False | None | False | 28143.0 | 0 | | 3358665 | 118111 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 364.62 | 364.62 | 10.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3358666 | 118111 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 368.27 | 368.27 | 15.0 | False | None | None | False | None | False | 5524.05 | 0 | | 3358667 | 118111 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 | | 3358668 | 118111 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 451.69 | 451.69 | 50.0 | False | None | None | False | None | False | 22584.5 | 0 | | 3358669 | 118111 | None | V-2 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 568.49 | 568.49 | 20.0 | False | None | None | False | None | False | 11369.8 | 0 | | 3358670 | 118111 | None | V-2 13.4.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - GF ---- etc., complete with all lead | Each | 337.48 | 337.48 | 3.0 | False | None | None | False | None | False | 1012.44 | 0 | | 3358671 | 118111 | None | V-2 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - FF ---- etc., complete with all lead | Each | 340.85 | 340.85 | 2.0 | False | None | None | False | None | False | 681.7 | 0 | | 3358672 | 118111 | None | V-2 739 | Providing and fixing 20mm thick grey granite,.For Urinals partition - GF ---- etc., complete with all lead | Sqm | 1121.0 | 1121.0 | 5.0 | False | None | None | False | None | False | 5605.0 | 0 | | 3358673 | 118111 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 10.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3358674 | 118111 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - FF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 3358675 | 118111 | None | Data Rate-07 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 6.0 | False | None | None | False | None | False | 927.48 | 0 | | 3358676 | 118111 | None | Data Rate-08 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 6.0 | False | None | None | False | None | False | 1111.56 | 0 | | 3358677 | 118111 | None | Data Rate-09 | Air Vent Cowel 75mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 10.0 | False | None | None | False | None | False | 4130.0 | 0 | | 3358678 | 118111 | None | Data Rate-10 | Air Vent Cowel 110mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 10.0 | False | None | None | False | None | False | 5900.0 | 0 | | 3358679 | 118111 | None | Data Rate-11 | Supplying and fixing Counter basin consisting of s GF Toilet & FF Toilet. complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 5664.0 | 5664.0 | 5.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3358680 | 118111 | None | Data Rate-12 | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 | | 3358681 | 118111 | None | Data Rate-13 | Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confiMing to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 1996.56 | 1996.56 | 2.0 | False | None | None | False | None | False | 3993.12 | 0 | | 3358682 | 118111 | None | Data Rate-14 | Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick confoMed to IS 1239 etc., complete as directed by the engineer Incharge. ---- etc., complete with all lead | Nos | 767.0 | 767.0 | 10.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3358683 | 118111 | None | Data Rate-15 | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 3540.0 | 3540.0 | 2.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358684 | 118111 | None | V-5 10.2.4 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead | Mtr | 679.68 | 679.68 | 50.0 | False | None | None | False | None | False | 33984.0 | 0 | | 3358685 | 118111 | None | V-5 10.2.5 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 200mm dia. ---- etc., complete with all lead | Mtr | 980.58 | 980.58 | 10.0 | False | None | None | False | None | False | 9805.8 | 0 | | 3358686 | 118111 | None | V-5 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete with all lead | Nos | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 3358687 | 118111 | None | V-2 13.58 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).10cms x 10cms ---- etc., complete with all lead | Nos | 408.28 | 408.28 | 4.0 | False | None | None | False | None | False | 1633.12 | 0 | | 3358688 | 118111 | None | V-2 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead | Nos | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3358689 | 118111 | None | V-2 6.3 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- etc., complete with all lead | Cum | 10471.32 | 10471.32 | 5.3 | False | None | None | False | None | False | 55497.996 | 0 | | 3358690 | 118111 | None | V-2 2.3.1 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid Seperately) ---- etc., complete with all lead | Cum | 8207.25 | 8207.25 | 11.75 | False | None | None | False | None | False | 96435.1875 | 0 | | 3358691 | 118111 | None | 15.24 2018-19 | KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead | Sqm | 5.9 | 5.9 | 16.6 | False | None | None | False | None | False | 97.94 | 0 | | 3358692 | 118111 | None | Data Rate-16 | Providing and fixing M.S.steel cover for tank opening including materials, labour etc., complete. ---- etc., complete with all lead | Nos | 1770.0 | 1770.0 | 4.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358693 | 118111 | None | V-2 137 | Providing and Filling of Brick bats 25 to 100 mm Soak Pit etc. complete as per directions of the Engineer-in charge ---- etc., complete with all lead | Cum | 944.0 | 944.0 | 3.5 | False | None | None | False | None | False | 3304.0 | 0 | | 3358694 | 118111 | None | V-2 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 13.5 | False | None | None | False | None | False | 38646.18 | 0 | | 3358695 | 118111 | None | V-2 19.7.1 | Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 47.27 | False | None | None | False | None | False | 26885.2852 | 0 | | 3358696 | 118111 | None | V-2 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 26.64 | False | None | None | False | None | False | 7544.448 | 0 | | 3358697 | 118111 | None | V-2 19.51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Unit | 647.82 | 647.82 | 5.0 | False | None | None | False | None | False | 3239.1 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT MAREMBIDA - ELECTRICAL WORK (SLICE-04) | 446049.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358698 | 118112 | None | 2.2.1, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point upto 3 Mtr from tapping point to out let via switch ---- etc., complete with all lead | Each | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3358699 | 118112 | None | 2.2.2, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3 Mtr upto 6Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3358700 | 118112 | None | 2.2.3, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.c) Long point above 6mtr upto 10Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 654.9 | 654.9 | 15.0 | False | None | None | False | None | False | 9823.5 | 0 | | 3358701 | 118112 | None | 3.4.2, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3 Way
---- etc., complete with all lead | Each | 187.62 | 187.62 | 21.0 | False | None | None | False | None | False | 3940.02 | 0 | | 3358702 | 118112 | None | 3.4.3, V-2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 4-5Way
---- etc., complete with all lead | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3358703 | 118112 | None | 3.4.4, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6Way
---- etc., complete with all lead | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3358704 | 118112 | None | 3.4.5, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3358705 | 118112 | None | 3.4.6, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3358706 | 118112 | None | 3.5.2, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module
---- etc., complete with all lead | Each | 189.98 | 189.98 | 21.0 | False | None | None | False | None | False | 3989.58 | 0 | | 3358707 | 118112 | None | 3.5.3, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4-5 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3358708 | 118112 | None | 3.5.4, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358709 | 118112 | None | 3.5.5, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3358710 | 118112 | None | 3.5.6, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3358711 | 118112 | None | 3.6.1, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps one way. ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 3358712 | 118112 | None | 3.6.2, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3358713 | 118112 | None | 3.6.3, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps 3way socket. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3358714 | 118112 | None | 3.6.9, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Bell push ---- etc., complete with all lead | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3358715 | 118112 | None | 3.6.4, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3358716 | 118112 | None | 3.6.10, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3358717 | 118112 | None | 3.6.11, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3358718 | 118112 | None | 3.6.12, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358719 | 118112 | None | 12.2.1, V-6 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.-Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3358720 | 118112 | None | 1.13, V-6 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | Nos | 192.34 | 192.34 | 12.0 | False | None | None | False | None | False | 2308.08 | 0 | | 3358721 | 118112 | None | 1.2.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 320.0 | False | None | None | False | None | False | 24921.6 | 0 | | 3358722 | 118112 | None | 1.2.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3358723 | 118112 | None | 1.3.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-19/20mm dia 2mm thick
---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 110.0 | False | None | None | False | None | False | 8826.4 | 0 | | 3358724 | 118112 | None | 1.3.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-25mm dia 2mm thick
---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 95.0 | False | None | None | False | None | False | 8855.9 | 0 | | 3358725 | 118112 | None | 2.3.2, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-1.5 sqmm ---- etc., complete with all lead | Mtr | 30.68 | 30.68 | 125.0 | False | None | None | False | None | False | 3835.0 | 0 | | 3358726 | 118112 | None | 2.3.3, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-2.5 sqmm ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3358727 | 118112 | None | 2.3.4, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-4 sqmm ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 380.0 | False | None | None | False | None | False | 28249.2 | 0 | | 3358728 | 118112 | None | 5.19.9, V-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure- II- Double Door-12 Way SP & N
---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3358729 | 118112 | None | 5.18.1, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 etc.-6-32Amps SP
---- etc., complete with all lead | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3358730 | 118112 | None | 5.20.1, V-6 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3358731 | 118112 | None | 32.03, BSR-32 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 4 core 10 sqmm ---- etc., complete with all lead | Km | 175362.16 | 175362.16 | 0.1 | False | None | None | False | None | False | 17536.216 | 0 | | 3358732 | 118112 | None | 31.05, BSR -31 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 19067.62 | 19067.62 | 0.1 | False | None | None | False | None | False | 1906.762 | 0 | | 3358733 | 118112 | None | 6.6.2, Ele SR-2019-20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.-In soil (hard)
---- etc., complete with all lead | Mtr | 120.36 | 120.36 | 20.0 | False | None | None | False | None | False | 2407.2 | 0 | | 3358734 | 118112 | None | 6.9.1- V-6 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.-40mm
---- etc., complete with all lead | Mtr | 395.3 | 395.3 | 5.0 | False | None | None | False | None | False | 1976.5 | 0 | | 3358735 | 118112 | None | 12.56, V-6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.
---- etc., complete with all lead | Nos | 4141.8 | 4141.8 | 2.0 | False | None | None | False | None | False | 8283.6 | 0 | | 3358736 | 118112 | None | 12.58.1, V-6 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 45.0 | False | None | None | False | None | False | 4354.2 | 0 | | 3358737 | 118112 | None | 11.3.1, V-6 | Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition- LED light fighting 1 x4- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3358738 | 118112 | None | 11.5.2, V-6 | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED square or round down light 10-12W
---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3358739 | 118112 | None | 11.11.3, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3358740 | 118112 | None | 11.11.7, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- etc., complete with all lead | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3358741 | 118112 | None | 11.8.2, V-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 40watts
---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3358742 | 118112 | None | 12.27, V-6 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Nos | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3358743 | 118112 | None | 6.1, V-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3358744 | 118112 | None | 6.3.1, V-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.-48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3358745 | 118112 | None | 12.46, V-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin. ---- etc., complete with all lead | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3358746 | 118112 | None | 13.7.1, V-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3358747 | 118112 | None | 13.11, V-6 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- etc., complete with all lead | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3358748 | 118112 | None | 13.13, V-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3358749 | 118112 | None | 13.4.1, V-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.-Single bracket 1.5 Mtr. Length
---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3358750 | 118112 | None | 13.5, V-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc., complete with all lead | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3358751 | 118112 | None | 5.42.2, V-6 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete-16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 3358752 | 118112 | None | 5.40.1, V-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.-100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3358753 | 118112 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -40x40x6mm ---- etc., complete with all lead | Mtr | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3358754 | 118112 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -50x100x50x6mm C channel ---- etc., complete with all lead | Mtr | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3358755 | 118112 | None | 5.15.9, V-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR POLE-100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3358756 | 118112 | None | 5.18.4, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898- 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3358757 | 118112 | None | 5.18.9, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-50-63Amps TPN ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3358758 | 118112 | None | 5.7.2, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-32Amps
---- etc., complete with all lead | Each | 185.26 | 185.26 | 3.0 | False | None | None | False | None | False | 555.78 | 0 | | 3358759 | 118112 | None | 5.7.3, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-63Amps
---- etc., complete with all lead | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3358760 | 118112 | None | 5.12.1, V-6 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-63Amps ---- etc., complete with all lead | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3358761 | 118112 | None | 5.27, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- etc., complete with all lead | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3358762 | 118112 | None | 5.28, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- etc., complete with all lead | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3358763 | 118112 | None | 5.29, V-6 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
---- etc., complete with all lead | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3358764 | 118112 | None | 5.38, V-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 12/24v D.C
---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3358765 | 118112 | None | 5.34, V-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3358766 | 118112 | None | 5.30, V-6 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 2.0 | False | None | None | False | None | False | 3256.8 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT KIRAVADI - CIVIL & WATER SUPPLY WORK (SLICE-05) | 5988668.94 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358767 | 118113 | None | 1.12, V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 29.03 | False | None | None | False | None | False | 3254.263 | 0 | | 3358768 | 118113 | None | 1.14.1, V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 172.94 | False | None | None | False | None | False | 20815.0584 | 0 | | 3358769 | 118113 | None | 1.15.1, V-1 | Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work
---- etc., complete with all lead | Cum | 428.34 | 428.34 | 14.56 | False | None | None | False | None | False | 6236.6304 | 0 | | 3358770 | 118113 | None | 1.1B, V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
---- etc., complete with all lead | Cum | 140.42 | 140.42 | 34.56 | False | None | None | False | None | False | 4852.9152 | 0 | | 3358771 | 118113 | None | 1.5.1, V-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
---- etc., complete with all lead | Cum | 352.82 | 352.82 | 34.0 | False | None | None | False | None | False | 11995.88 | 0 | | 3358772 | 118113 | None | 1.9, V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 42.0 | False | None | None | False | None | False | 13182.96 | 0 | | 3358773 | 118113 | None | 4.1, V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 110.22 | False | None | None | False | None | False | 15347.0328 | 0 | | 3358774 | 118113 | None | 1.8, V-1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
---- etc., complete with all lead | Cum | 559.32 | 559.32 | 142.53 | False | None | None | False | None | False | 79719.8796 | 0 | | 3358775 | 118113 | None | 2.1.3, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 25.92 | False | None | None | False | None | False | 183177.1584 | 0 | | 3358776 | 118113 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Concrete (Formwork,
Centering & Scaffolding Charges of 8%) ---- etc., complete with all lead | Cum | 8012.15 | 8012.15 | 37.67 | False | None | None | False | None | False | 301817.6905 | 0 | | 3358777 | 118113 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Pedestral Concrete (Formwork,
Centering & Scaffolding Charges of 10%)
---- etc., complete with all lead | Cum | 8160.53 | 8160.53 | 1.75 | False | None | None | False | None | False | 14280.9275 | 0 | | 3358778 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%) - GF
---- etc., complete with all lead | Cum | 13299.78 | 13299.78 | 6.35 | False | None | None | False | None | False | 84453.603 | 0 | | 3358779 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%)- FF ---- etc., complete with all lead | Cum | 13432.78 | 13432.78 | 3.19 | False | None | None | False | None | False | 42850.5682 | 0 | | 3358780 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam, RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%) - GF ---- etc., complete with all lead | Cum | 11735.1 | 11735.1 | 32.27 | False | None | None | False | None | False | 378691.677 | 0 | | 3358781 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%)- FF
---- etc., complete with all lead | Cum | 11852.45 | 11852.45 | 10.26 | False | None | None | False | None | False | 121606.137 | 0 | | 3358782 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam, Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- GF
---- etc., complete with all lead | Cum | 12517.44 | 12517.44 | 9.21 | False | None | None | False | None | False | 115285.6224 | 0 | | 3358783 | 118113 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam ,Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- FF
---- etc., complete with all lead | Cum | 12642.61 | 12642.61 | 6.71 | False | None | None | False | None | False | 84831.9131 | 0 | | 3358784 | 118113 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates- GF
---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 1.59 | False | None | None | False | None | False | 11664.3354 | 0 | | 3358785 | 118113 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF
---- etc., complete with all lead | Cum | 7409.42 | 7409.42 | 1.21 | False | None | None | False | None | False | 8965.3982 | 0 | | 3358786 | 118113 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - GF ---- etc., complete with all lead | Cum | 9014.65 | 9014.65 | 0.43 | False | None | None | False | None | False | 3876.2995 | 0 | | 3358787 | 118113 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF ---- etc., complete with all lead | Cum | 10743.66 | 10743.66 | 0.43 | False | None | None | False | None | False | 4619.7738 | 0 | | 3358788 | 118113 | None | Data rate -1 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). - GF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.63 | False | None | None | False | None | False | 1334.462 | 0 | | 3358789 | 118113 | None | Data Rate - 2 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).- FF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.56 | False | None | None | False | None | False | 1298.944 | 0 | | 3358790 | 118113 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.- GF
---- etc., complete with all lead | MT | 105559.26 | 105559.26 | 8.828 | False | None | None | False | None | False | 931877.14728 | 0 | | 3358791 | 118113 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- FF
---- etc., complete with all lead | MT | 106614.85 | 106614.85 | 2.02 | False | None | None | False | None | False | 215361.997 | 0 | | 3358792 | 118113 | None | Data Rate - 3 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. - GF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 27.45 | False | None | None | False | None | False | 2429.325 | 0 | | 3358793 | 118113 | None | Data Rate - 4 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge - FF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 28.4 | False | None | None | False | None | False | 2513.4 | 0 | | 3358794 | 118113 | None | 5.4, V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.04 | False | None | None | False | None | False | 60613.7208 | 0 | | 3358795 | 118113 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF
---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 141.17 | False | None | None | False | None | False | 218220.586 | 0 | | 3358796 | 118113 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 164.72 | False | None | None | False | None | False | 257170.7472 | 0 | | 3358797 | 118113 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 20.8 | False | None | None | False | None | False | 27096.576 | 0 | | 3358798 | 118113 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 36.3 | False | None | None | False | None | False | 47761.725 | 0 | | 3358799 | 118113 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.-GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.39 | False | None | None | False | None | False | 45474.663 | 0 | | 3358800 | 118113 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.- FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.16 | False | None | None | False | None | False | 18842.8352 | 0 | | 3358801 | 118113 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. - GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 6.0 | False | None | None | False | None | False | 7193.28 | 0 | | 3358802 | 118113 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.- FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3358803 | 118113 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1241.36 | 1241.36 | 6.0 | False | None | None | False | None | False | 7448.16 | 0 | | 3358804 | 118113 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-FF ---- etc., complete with all lead | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3358805 | 118113 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1168.2 | 1168.2 | 6.0 | False | None | None | False | None | False | 7009.2 | 0 | | 3358806 | 118113 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.- FF ---- etc., complete with all lead | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3358807 | 118113 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete - GF ---- etc., complete with all lead | Nos | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 | | 3358808 | 118113 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- FF ---- etc., complete with all lead | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3358809 | 118113 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -GF ---- etc., complete with all lead | Nos | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3358810 | 118113 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -FF ---- etc., complete with all lead | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3358811 | 118113 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms etc. complete - GF ---- etc., complete with all lead | Nos | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 | | 3358812 | 118113 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. etc complete - FF
---- etc., complete with all lead | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3358813 | 118113 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) -GF ---- etc., complete with all lead | Nos | 324.5 | 324.5 | 12.0 | False | None | None | False | None | False | 3894.0 | 0 | | 3358814 | 118113 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) - FF ---- etc., complete with all lead | Nos | 327.75 | 327.75 | 8.0 | False | None | None | False | None | False | 2622.0 | 0 | | 3358815 | 118113 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - GF ---- etc., complete with all lead | Nos | 70.8 | 70.8 | 36.0 | False | None | None | False | None | False | 2548.8 | 0 | | 3358816 | 118113 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - FF ---- etc., complete with all lead | Nos | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3358817 | 118113 | None | Data Rate-5 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-GF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 35.4 | False | None | None | False | None | False | 1044.3 | 0 | | 3358818 | 118113 | None | Data Rate-06 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-FF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 23.0 | False | None | None | False | None | False | 678.5 | 0 | | 3358819 | 118113 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial- GF ---- etc., complete with all lead | Sqm | 3545.9 | 3545.9 | 13.02 | False | None | None | False | None | False | 46167.618 | 0 | | 3358820 | 118113 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial-FF ---- etc., complete with all lead | Sqm | 3581.36 | 3581.36 | 7.98 | False | None | None | False | None | False | 28579.2528 | 0 | | 3358821 | 118113 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)-GF ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 11.25 | False | None | None | False | None | False | 86964.525 | 0 | | 3358822 | 118113 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 7807.48 | 7807.48 | 10.35 | False | None | None | False | None | False | 80807.418 | 0 | | 3358823 | 118113 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 0.72 | False | None | None | False | None | False | 4858.8624 | 0 | | 3358824 | 118113 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3358825 | 118113 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-GF ---- etc., complete with all lead | Kgs | 198.24 | 198.24 | 260.82 | False | None | None | False | None | False | 51704.9568 | 0 | | 3358826 | 118113 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FF ---- etc., complete with all lead | Kgs | 200.22 | 200.22 | 199.26 | False | None | None | False | None | False | 39895.8372 | 0 | | 3358827 | 118113 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-GF ---- etc., complete with all lead | Mtr | 758.74 | 758.74 | 19.8 | False | None | None | False | None | False | 15023.052 | 0 | | 3358828 | 118113 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-FF ---- etc., complete with all lead | Mtr | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3358829 | 118113 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames- GF ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 6.3 | False | None | None | False | None | False | 23818.536 | 0 | | 3358830 | 118113 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames -FF ---- etc., complete with all lead | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3358831 | 118113 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge-GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 104.03 | False | None | None | False | None | False | 25901.3894 | 0 | | 3358832 | 118113 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge-FF
---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 118.01 | False | None | None | False | None | False | 29675.9747 | 0 | | 3358833 | 118113 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 340.2 | False | None | None | False | None | False | 140101.164 | 0 | | 3358834 | 118113 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 238.84 | False | None | None | False | None | False | 99343.1096 | 0 | | 3358835 | 118113 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 441.91 | False | None | None | False | None | False | 52145.38 | 0 | | 3358836 | 118113 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 368.14 | False | None | None | False | None | False | 43874.9252 | 0 | | 3358837 | 118113 | None | 89, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-GF ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 212.74 | False | None | None | False | None | False | 96647.782 | 0 | | 3358838 | 118113 | None | 8.9, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-FF ---- etc., complete with all lead | Sqm | 458.84 | 458.84 | 215.75 | False | None | None | False | None | False | 98994.73 | 0 | | 3358839 | 118113 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 36.98 | False | None | None | False | None | False | 12872.738 | 0 | | 3358840 | 118113 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 27.87 | False | None | None | False | None | False | 9798.5346 | 0 | | 3358841 | 118113 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-GF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 535.2 | False | None | None | False | None | False | 23998.368 | 0 | | 3358842 | 118113 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-FF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 399.0 | False | None | None | False | None | False | 17891.16 | 0 | | 3358843 | 118113 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 12.24 | False | None | None | False | None | False | 8882.568 | 0 | | 3358844 | 118113 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 8.94 | False | None | None | False | None | False | 6552.6624 | 0 | | 3358845 | 118113 | None | 7.18, V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 1.2 | False | None | None | False | None | False | 2884.632 | 0 | | 3358846 | 118113 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-GF ---- etc., complete with all lead | Mtr | 61.36 | 61.36 | 238.64 | False | None | None | False | None | False | 14642.9504 | 0 | | 3358847 | 118113 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-FF ---- etc., complete with all lead | Mtr | 61.97 | 61.97 | 160.83 | False | None | None | False | None | False | 9966.6351 | 0 | | 3358848 | 118113 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 89.09 | False | None | None | False | None | False | 123523.285 | 0 | | 3358849 | 118113 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 54.78 | False | None | None | False | None | False | 76712.2686 | 0 | | 3358850 | 118113 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent-GF
---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 31.52 | False | None | None | False | None | False | 91719.4176 | 0 | | 3358851 | 118113 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FF ---- etc., complete with all lead | Sqm | 2938.98 | 2938.98 | 3.64 | False | None | None | False | None | False | 10697.8872 | 0 | | 3358852 | 118113 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 5.86 | False | None | None | False | None | False | 6147.2572 | 0 | | 3358853 | 118113 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 5.98 | False | None | None | False | None | False | 6335.8698 | 0 | | 3358854 | 118113 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-GF ---- etc., complete with all lead | Sqm | 1642.56 | 1642.56 | 36.98 | False | None | None | False | None | False | 60741.8688 | 0 | | 3358855 | 118113 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-FF ---- etc., complete with all lead | Sqm | 1658.99 | 1658.99 | 19.91 | False | None | None | False | None | False | 33030.4909 | 0 | | 3358856 | 118113 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-GF ---- etc., complete with all lead | Sqm | 416.54 | 416.54 | 26.42 | False | None | None | False | None | False | 11004.9868 | 0 | | 3358857 | 118113 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-FF ---- etc., complete with all lead | Sqm | 420.71 | 420.71 | 33.85 | False | None | None | False | None | False | 14241.0335 | 0 | | 3358858 | 118113 | None | 11.28, V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc., complete with all lead | Kgs | 666.7 | 666.7 | 172.8 | False | None | None | False | None | False | 115205.76 | 0 | | 3358859 | 118113 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 441.91 | False | None | None | False | None | False | 57359.918 | 0 | | 3358860 | 118113 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 131.1 | 131.1 | 250.13 | False | None | None | False | None | False | 32792.043 | 0 | | 3358861 | 118113 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 196.14 | False | None | None | False | None | False | 36105.4512 | 0 | | 3358862 | 118113 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 215.75 | False | None | None | False | None | False | 40112.24 | 0 | | 3358863 | 118113 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 12.42 | False | None | None | False | None | False | 732.78 | 0 | | 3358864 | 118113 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 11.07 | False | None | None | False | None | False | 659.6613 | 0 | | 3358865 | 118113 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 12.42 | False | None | None | False | None | False | 1685.394 | 0 | | 3358866 | 118113 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 11.07 | False | None | None | False | None | False | 1517.2542 | 0 | | 3358867 | 118113 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 35.71 | False | None | None | False | None | False | 2233.3034 | 0 | | 3358868 | 118113 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 21.89 | False | None | None | False | None | False | 1382.7913 | 0 | | 3358869 | 118113 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 159.3 | 159.3 | 35.71 | False | None | None | False | None | False | 5688.603 | 0 | | 3358870 | 118113 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 160.89 | 160.89 | 21.89 | False | None | None | False | None | False | 3521.8821 | 0 | | 3358871 | 118113 | None | 15.1, V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge- FF ---- etc., complete with all lead | Sqm | 973.7 | 973.7 | 99.0 | False | None | None | False | None | False | 96396.3 | 0 | | 3358872 | 118113 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-GF ---- etc., complete with all lead | Mtr | 343.38 | 343.38 | 25.0 | False | None | None | False | None | False | 8584.5 | 0 | | 3358873 | 118113 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-FF
---- etc., complete with all lead | Mtr | 346.81 | 346.81 | 30.0 | False | None | None | False | None | False | 10404.3 | 0 | | 3358874 | 118113 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 10.0 | False | None | None | False | None | False | 1085.6 | 0 | | 3358875 | 118113 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead | Mtr | 109.65 | 109.65 | 10.0 | False | None | None | False | None | False | 1096.5 | 0 | | 3358876 | 118113 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of a000000pproved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.62 | 164.62 | 10.0 | False | None | None | False | None | False | 1646.2 | 0 | | 3358877 | 118113 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358878 | 118113 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.02 | 164.02 | 10.0 | False | None | None | False | None | False | 1640.2 | 0 | | 3358879 | 118113 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3358880 | 118113 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 259.6 | 259.6 | 55.0 | False | None | None | False | None | False | 14278.0 | 0 | | 3358881 | 118113 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 262.2 | 262.2 | 20.0 | False | None | None | False | None | False | 5244.0 | 0 | | 3358882 | 118113 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 484.98 | 484.98 | 47.0 | False | None | None | False | None | False | 22794.06 | 0 | | 3358883 | 118113 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 489.83 | 489.83 | 30.0 | False | None | None | False | None | False | 14694.9 | 0 | | 3358884 | 118113 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - GF ---- etc., complete with all lead | Nos | 1439.6 | 1439.6 | 3.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3358885 | 118113 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF ---- etc., complete with all lead | Nos | 1454.0 | 1454.0 | 2.0 | False | None | None | False | None | False | 2908.0 | 0 | | 3358886 | 118113 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 1.0 | False | None | None | False | None | False | 329.22 | 0 | | 3358887 | 118113 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 2.0 | False | None | None | False | None | False | 665.02 | 0 | | 3358888 | 118113 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - GF ---- etc., complete with all lead | Nos | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3358889 | 118113 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - FF ---- etc., complete with all lead | Nos | 6628.79 | 6628.79 | 2.0 | False | None | None | False | None | False | 13257.58 | 0 | | 3358890 | 118113 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. - GF ---- etc., complete with all lead | Nos | 585.28 | 585.28 | 3.0 | False | None | None | False | None | False | 1755.84 | 0 | | 3358891 | 118113 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- FF ---- etc., complete with all lead | Nos | 591.13 | 591.13 | 2.0 | False | None | None | False | None | False | 1182.26 | 0 | | 3358892 | 118113 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - GF ---- etc., complete with all lead | Nos | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3358893 | 118113 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF ---- etc., complete with all lead | Nos | 7123.39 | 7123.39 | 1.0 | False | None | None | False | None | False | 7123.39 | 0 | | 3358894 | 118113 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - GF ---- etc., complete with all lead | Each | 4185.46 | 4185.46 | 1.0 | False | None | None | False | None | False | 4185.46 | 0 | | 3358895 | 118113 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - FF ---- etc., complete with all lead | Each | 4227.31 | 4227.31 | 1.0 | False | None | None | False | None | False | 4227.31 | 0 | | 3358896 | 118113 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF ---- etc., complete with all lead | Nos | 5255.72 | 5255.72 | 1.0 | False | None | None | False | None | False | 5255.72 | 0 | | 3358897 | 118113 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - FF ---- etc., complete with all lead | Nos | 5308.28 | 5308.28 | 1.0 | False | None | None | False | None | False | 5308.28 | 0 | | 3358898 | 118113 | None | V-2 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm - GF ---- etc., complete with all lead | Nos | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3358899 | 118113 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - GF ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 2.0 | False | None | None | False | None | False | 705.64 | 0 | | 3358900 | 118113 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - FF ---- etc., complete with all lead | Nos | 356.24 | 356.24 | 2.0 | False | None | None | False | None | False | 712.48 | 0 | | 3358901 | 118113 | None | V-2 14.10.1.4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead | Nos | 5758.78 | 5758.78 | 1.0 | False | None | None | False | None | False | 5758.78 | 0 | | 3358902 | 118113 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF ---- etc., complete with all lead | Nos | 3636.76 | 3636.76 | 3.0 | False | None | None | False | None | False | 10910.28 | 0 | | 3358903 | 118113 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - FF ---- etc., complete with all lead | Nos | 3673.13 | 3673.13 | 2.0 | False | None | None | False | None | False | 7346.26 | 0 | | 3358904 | 118113 | None | V-2 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 | | 3358905 | 118113 | None | V-2 13.33.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 256.06 | 256.06 | 20.0 | False | None | None | False | None | False | 5121.2 | 0 | | 3358906 | 118113 | None | V-2 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 562.86 | 562.86 | 50.0 | False | None | None | False | None | False | 28143.0 | 0 | | 3358907 | 118113 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 364.62 | 364.62 | 10.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3358908 | 118113 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 368.27 | 368.27 | 15.0 | False | None | None | False | None | False | 5524.05 | 0 | | 3358909 | 118113 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 | | 3358910 | 118113 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 451.69 | 451.69 | 50.0 | False | None | None | False | None | False | 22584.5 | 0 | | 3358911 | 118113 | None | V-2 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 568.49 | 568.49 | 20.0 | False | None | None | False | None | False | 11369.8 | 0 | | 3358912 | 118113 | None | V-2 13.4.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - GF ---- etc., complete with all lead | Each | 337.48 | 337.48 | 3.0 | False | None | None | False | None | False | 1012.44 | 0 | | 3358913 | 118113 | None | V-2 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - FF ---- etc., complete with all lead | Each | 340.85 | 340.85 | 2.0 | False | None | None | False | None | False | 681.7 | 0 | | 3358914 | 118113 | None | V-2 739 | Providing and fixing 20mm thick grey granite,.For Urinals partition - GF ---- etc., complete with all lead | Sqm | 1121.0 | 1121.0 | 5.0 | False | None | None | False | None | False | 5605.0 | 0 | | 3358915 | 118113 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 10.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3358916 | 118113 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - FF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 3358917 | 118113 | None | Data Rate-07 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 6.0 | False | None | None | False | None | False | 927.48 | 0 | | 3358918 | 118113 | None | Data Rate-08 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 6.0 | False | None | None | False | None | False | 1111.56 | 0 | | 3358919 | 118113 | None | Data Rate-09 | Air Vent Cowel 75mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 10.0 | False | None | None | False | None | False | 4130.0 | 0 | | 3358920 | 118113 | None | Data Rate-10 | Air Vent Cowel 110mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 10.0 | False | None | None | False | None | False | 5900.0 | 0 | | 3358921 | 118113 | None | Data Rate-11 | Supplying and fixing Counter basin consisting of s GF Toilet & FF Toilet. complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 5664.0 | 5664.0 | 5.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3358922 | 118113 | None | Data Rate-12 | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 | | 3358923 | 118113 | None | Data Rate-13 | Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confiMing to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 1996.56 | 1996.56 | 2.0 | False | None | None | False | None | False | 3993.12 | 0 | | 3358924 | 118113 | None | Data Rate-14 | Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick confoMed to IS 1239 etc., complete as directed by the engineer Incharge. ---- etc., complete with all lead | Nos | 767.0 | 767.0 | 10.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3358925 | 118113 | None | Data Rate-15 | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 3540.0 | 3540.0 | 2.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358926 | 118113 | None | V-5 10.2.4 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead | Mtr | 679.68 | 679.68 | 50.0 | False | None | None | False | None | False | 33984.0 | 0 | | 3358927 | 118113 | None | V-5 10.2.5 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 200mm dia. ---- etc., complete with all lead | Mtr | 980.58 | 980.58 | 10.0 | False | None | None | False | None | False | 9805.8 | 0 | | 3358928 | 118113 | None | V-5 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete with all lead | Nos | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 3358929 | 118113 | None | V-2 13.58 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).10cms x 10cms ---- etc., complete with all lead | Nos | 408.28 | 408.28 | 4.0 | False | None | None | False | None | False | 1633.12 | 0 | | 3358930 | 118113 | None | V-2 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead | Nos | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3358931 | 118113 | None | V-2 6.3 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- etc., complete with all lead | Cum | 10471.32 | 10471.32 | 5.3 | False | None | None | False | None | False | 55497.996 | 0 | | 3358932 | 118113 | None | V-2 2.3.1 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid Seperately) ---- etc., complete with all lead | Cum | 8207.25 | 8207.25 | 11.75 | False | None | None | False | None | False | 96435.1875 | 0 | | 3358933 | 118113 | None | 15.24 2018-19 | KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead | Sqm | 5.9 | 5.9 | 16.6 | False | None | None | False | None | False | 97.94 | 0 | | 3358934 | 118113 | None | Data Rate-16 | Providing and fixing M.S.steel cover for tank opening including materials, labour etc., complete. ---- etc., complete with all lead | Nos | 1770.0 | 1770.0 | 4.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3358935 | 118113 | None | V-2 137 | Providing and Filling of Brick bats 25 to 100 mm Soak Pit etc. complete as per directions of the Engineer-in charge ---- etc., complete with all lead | Cum | 944.0 | 944.0 | 3.5 | False | None | None | False | None | False | 3304.0 | 0 | | 3358936 | 118113 | None | V-2 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 13.5 | False | None | None | False | None | False | 38646.18 | 0 | | 3358937 | 118113 | None | V-2 19.7.1 | Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 47.27 | False | None | None | False | None | False | 26885.2852 | 0 | | 3358938 | 118113 | None | V-2 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 26.64 | False | None | None | False | None | False | 7544.448 | 0 | | 3358939 | 118113 | None | V-2 19.51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Unit | 647.82 | 647.82 | 5.0 | False | None | None | False | None | False | 3239.1 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT KIRAVADI - ELECTRICAL WORK (SLICE-06) | 446049.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3358940 | 118114 | None | 2.2.1, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point upto 3 Mtr from tapping point to out let via switch ---- etc., complete with all lead | Each | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3358941 | 118114 | None | 2.2.2, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3 Mtr upto 6Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3358942 | 118114 | None | 2.2.3, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.c) Long point above 6mtr upto 10Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 654.9 | 654.9 | 15.0 | False | None | None | False | None | False | 9823.5 | 0 | | 3358943 | 118114 | None | 3.4.2, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3 Way
---- etc., complete with all lead | Each | 187.62 | 187.62 | 21.0 | False | None | None | False | None | False | 3940.02 | 0 | | 3358944 | 118114 | None | 3.4.3, V-2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 4-5Way
---- etc., complete with all lead | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3358945 | 118114 | None | 3.4.4, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6Way
---- etc., complete with all lead | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3358946 | 118114 | None | 3.4.5, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3358947 | 118114 | None | 3.4.6, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3358948 | 118114 | None | 3.5.2, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module
---- etc., complete with all lead | Each | 189.98 | 189.98 | 21.0 | False | None | None | False | None | False | 3989.58 | 0 | | 3358949 | 118114 | None | 3.5.3, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4-5 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3358950 | 118114 | None | 3.5.4, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358951 | 118114 | None | 3.5.5, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3358952 | 118114 | None | 3.5.6, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3358953 | 118114 | None | 3.6.1, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps one way. ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 3358954 | 118114 | None | 3.6.2, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3358955 | 118114 | None | 3.6.3, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps 3way socket. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3358956 | 118114 | None | 3.6.9, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Bell push ---- etc., complete with all lead | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3358957 | 118114 | None | 3.6.4, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3358958 | 118114 | None | 3.6.10, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3358959 | 118114 | None | 3.6.11, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3358960 | 118114 | None | 3.6.12, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3358961 | 118114 | None | 12.2.1, V-6 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.-Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3358962 | 118114 | None | 1.13, V-6 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | Nos | 192.34 | 192.34 | 12.0 | False | None | None | False | None | False | 2308.08 | 0 | | 3358963 | 118114 | None | 1.2.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 320.0 | False | None | None | False | None | False | 24921.6 | 0 | | 3358964 | 118114 | None | 1.2.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3358965 | 118114 | None | 1.3.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-19/20mm dia 2mm thick
---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 110.0 | False | None | None | False | None | False | 8826.4 | 0 | | 3358966 | 118114 | None | 1.3.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-25mm dia 2mm thick
---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 95.0 | False | None | None | False | None | False | 8855.9 | 0 | | 3358967 | 118114 | None | 2.3.2, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-1.5 sqmm ---- etc., complete with all lead | Mtr | 30.68 | 30.68 | 125.0 | False | None | None | False | None | False | 3835.0 | 0 | | 3358968 | 118114 | None | 2.3.3, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-2.5 sqmm ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3358969 | 118114 | None | 2.3.4, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-4 sqmm ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 380.0 | False | None | None | False | None | False | 28249.2 | 0 | | 3358970 | 118114 | None | 5.19.9, V-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure- II- Double Door-12 Way SP & N
---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3358971 | 118114 | None | 5.18.1, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 etc.-6-32Amps SP
---- etc., complete with all lead | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3358972 | 118114 | None | 5.20.1, V-6 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3358973 | 118114 | None | 32.03, BSR-32 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 4 core 10 sqmm ---- etc., complete with all lead | Km | 175362.16 | 175362.16 | 0.1 | False | None | None | False | None | False | 17536.216 | 0 | | 3358974 | 118114 | None | 31.05, BSR -31 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 19067.62 | 19067.62 | 0.1 | False | None | None | False | None | False | 1906.762 | 0 | | 3358975 | 118114 | None | 6.6.2, Ele SR-2019-20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.-In soil (hard)
---- etc., complete with all lead | Mtr | 120.36 | 120.36 | 20.0 | False | None | None | False | None | False | 2407.2 | 0 | | 3358976 | 118114 | None | 6.9.1- V-6 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.-40mm
---- etc., complete with all lead | Mtr | 395.3 | 395.3 | 5.0 | False | None | None | False | None | False | 1976.5 | 0 | | 3358977 | 118114 | None | 12.56, V-6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.
---- etc., complete with all lead | Nos | 4141.8 | 4141.8 | 2.0 | False | None | None | False | None | False | 8283.6 | 0 | | 3358978 | 118114 | None | 12.58.1, V-6 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 45.0 | False | None | None | False | None | False | 4354.2 | 0 | | 3358979 | 118114 | None | 11.3.1, V-6 | Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition- LED light fighting 1 x4- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3358980 | 118114 | None | 11.5.2, V-6 | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED square or round down light 10-12W
---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3358981 | 118114 | None | 11.11.3, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3358982 | 118114 | None | 11.11.7, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- etc., complete with all lead | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3358983 | 118114 | None | 11.8.2, V-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 40watts
---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3358984 | 118114 | None | 12.27, V-6 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Nos | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3358985 | 118114 | None | 6.1, V-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3358986 | 118114 | None | 6.3.1, V-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.-48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3358987 | 118114 | None | 12.46, V-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin. ---- etc., complete with all lead | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3358988 | 118114 | None | 13.7.1, V-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3358989 | 118114 | None | 13.11, V-6 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- etc., complete with all lead | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3358990 | 118114 | None | 13.13, V-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3358991 | 118114 | None | 13.4.1, V-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.-Single bracket 1.5 Mtr. Length
---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3358992 | 118114 | None | 13.5, V-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc., complete with all lead | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3358993 | 118114 | None | 5.42.2, V-6 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete-16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 3358994 | 118114 | None | 5.40.1, V-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.-100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3358995 | 118114 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -40x40x6mm ---- etc., complete with all lead | Mtr | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3358996 | 118114 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -50x100x50x6mm C channel ---- etc., complete with all lead | Mtr | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3358997 | 118114 | None | 5.15.9, V-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR POLE-100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3358998 | 118114 | None | 5.18.4, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898- 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3358999 | 118114 | None | 5.18.9, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-50-63Amps TPN ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3359000 | 118114 | None | 5.7.2, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-32Amps
---- etc., complete with all lead | Each | 185.26 | 185.26 | 3.0 | False | None | None | False | None | False | 555.78 | 0 | | 3359001 | 118114 | None | 5.7.3, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-63Amps
---- etc., complete with all lead | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3359002 | 118114 | None | 5.12.1, V-6 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-63Amps ---- etc., complete with all lead | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3359003 | 118114 | None | 5.27, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- etc., complete with all lead | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3359004 | 118114 | None | 5.28, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- etc., complete with all lead | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3359005 | 118114 | None | 5.29, V-6 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
---- etc., complete with all lead | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3359006 | 118114 | None | 5.38, V-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 12/24v D.C
---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3359007 | 118114 | None | 5.34, V-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3359008 | 118114 | None | 5.30, V-6 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 2.0 | False | None | None | False | None | False | 3256.8 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT KURAGUNDA -CIVIL & WATER SUPPLY WORK (SLICE-07) | 5988880.06 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3359009 | 118115 | None | 1.12, V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 29.03 | False | None | None | False | None | False | 3254.263 | 0 | | 3359010 | 118115 | None | 1.14.1, V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 172.94 | False | None | None | False | None | False | 20815.0584 | 0 | | 3359011 | 118115 | None | 1.15.1, V-1 | Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work
---- etc., complete with all lead | Cum | 428.34 | 428.34 | 14.56 | False | None | None | False | None | False | 6236.6304 | 0 | | 3359012 | 118115 | None | 1.1B, V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
---- etc., complete with all lead | Cum | 140.42 | 140.42 | 34.56 | False | None | None | False | None | False | 4852.9152 | 0 | | 3359013 | 118115 | None | 1.5.1, V-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
---- etc., complete with all lead | Cum | 352.82 | 352.82 | 34.0 | False | None | None | False | None | False | 11995.88 | 0 | | 3359014 | 118115 | None | 1.9, V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 42.0 | False | None | None | False | None | False | 13182.96 | 0 | | 3359015 | 118115 | None | 4.1, V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 110.22 | False | None | None | False | None | False | 15347.0328 | 0 | | 3359016 | 118115 | None | 1.8, V-1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
---- etc., complete with all lead | Cum | 559.32 | 559.32 | 142.53 | False | None | None | False | None | False | 79719.8796 | 0 | | 3359017 | 118115 | None | 2.1.3, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 25.92 | False | None | None | False | None | False | 183177.1584 | 0 | | 3359018 | 118115 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Concrete (Formwork,
Centering & Scaffolding Charges of 8%) ---- etc., complete with all lead | Cum | 8012.15 | 8012.15 | 37.67 | False | None | None | False | None | False | 301817.6905 | 0 | | 3359019 | 118115 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Pedestral Concrete (Formwork,
Centering & Scaffolding Charges of 10%)
---- etc., complete with all lead | Cum | 8160.53 | 8160.53 | 1.75 | False | None | None | False | None | False | 14280.9275 | 0 | | 3359020 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%) - GF
---- etc., complete with all lead | Cum | 13299.78 | 13299.78 | 6.35 | False | None | None | False | None | False | 84453.603 | 0 | | 3359021 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%)- FF ---- etc., complete with all lead | Cum | 13432.78 | 13432.78 | 3.19 | False | None | None | False | None | False | 42850.5682 | 0 | | 3359022 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam, RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%) - GF ---- etc., complete with all lead | Cum | 11735.1 | 11735.1 | 32.27 | False | None | None | False | None | False | 378691.677 | 0 | | 3359023 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%)- FF
---- etc., complete with all lead | Cum | 11852.45 | 11852.45 | 10.26 | False | None | None | False | None | False | 121606.137 | 0 | | 3359024 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam, Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- GF
---- etc., complete with all lead | Cum | 12517.44 | 12517.44 | 9.21 | False | None | None | False | None | False | 115285.6224 | 0 | | 3359025 | 118115 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam ,Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- FF
---- etc., complete with all lead | Cum | 12642.61 | 12642.61 | 6.71 | False | None | None | False | None | False | 84831.9131 | 0 | | 3359026 | 118115 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates- GF
---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 1.59 | False | None | None | False | None | False | 11664.3354 | 0 | | 3359027 | 118115 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF
---- etc., complete with all lead | Cum | 7409.42 | 7409.42 | 1.21 | False | None | None | False | None | False | 8965.3982 | 0 | | 3359028 | 118115 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - GF ---- etc., complete with all lead | Cum | 9014.65 | 9014.65 | 0.43 | False | None | None | False | None | False | 3876.2995 | 0 | | 3359029 | 118115 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF ---- etc., complete with all lead | Cum | 10743.66 | 10743.66 | 0.43 | False | None | None | False | None | False | 4619.7738 | 0 | | 3359030 | 118115 | None | Data rate -1 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). - GF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.63 | False | None | None | False | None | False | 1334.462 | 0 | | 3359031 | 118115 | None | Data Rate - 2 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).- FF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.56 | False | None | None | False | None | False | 1298.944 | 0 | | 3359032 | 118115 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.- GF
---- etc., complete with all lead | MT | 105559.26 | 105559.26 | 8.83 | False | None | None | False | None | False | 932088.2658 | 0 | | 3359033 | 118115 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- FF
---- etc., complete with all lead | MT | 106614.85 | 106614.85 | 2.02 | False | None | None | False | None | False | 215361.997 | 0 | | 3359034 | 118115 | None | Data Rate - 3 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. - GF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 27.45 | False | None | None | False | None | False | 2429.325 | 0 | | 3359035 | 118115 | None | Data Rate - 4 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge - FF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 28.4 | False | None | None | False | None | False | 2513.4 | 0 | | 3359036 | 118115 | None | 5.4, V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.04 | False | None | None | False | None | False | 60613.7208 | 0 | | 3359037 | 118115 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF
---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 141.17 | False | None | None | False | None | False | 218220.586 | 0 | | 3359038 | 118115 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 164.72 | False | None | None | False | None | False | 257170.7472 | 0 | | 3359039 | 118115 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 20.8 | False | None | None | False | None | False | 27096.576 | 0 | | 3359040 | 118115 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 36.3 | False | None | None | False | None | False | 47761.725 | 0 | | 3359041 | 118115 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.-GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.39 | False | None | None | False | None | False | 45474.663 | 0 | | 3359042 | 118115 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.- FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.16 | False | None | None | False | None | False | 18842.8352 | 0 | | 3359043 | 118115 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. - GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 6.0 | False | None | None | False | None | False | 7193.28 | 0 | | 3359044 | 118115 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.- FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3359045 | 118115 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1241.36 | 1241.36 | 6.0 | False | None | None | False | None | False | 7448.16 | 0 | | 3359046 | 118115 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-FF ---- etc., complete with all lead | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3359047 | 118115 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1168.2 | 1168.2 | 6.0 | False | None | None | False | None | False | 7009.2 | 0 | | 3359048 | 118115 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.- FF ---- etc., complete with all lead | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3359049 | 118115 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete - GF ---- etc., complete with all lead | Nos | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 | | 3359050 | 118115 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- FF ---- etc., complete with all lead | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3359051 | 118115 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -GF ---- etc., complete with all lead | Nos | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3359052 | 118115 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -FF ---- etc., complete with all lead | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3359053 | 118115 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms etc. complete - GF ---- etc., complete with all lead | Nos | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 | | 3359054 | 118115 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. etc complete - FF
---- etc., complete with all lead | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3359055 | 118115 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) -GF ---- etc., complete with all lead | Nos | 324.5 | 324.5 | 12.0 | False | None | None | False | None | False | 3894.0 | 0 | | 3359056 | 118115 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) - FF ---- etc., complete with all lead | Nos | 327.75 | 327.75 | 8.0 | False | None | None | False | None | False | 2622.0 | 0 | | 3359057 | 118115 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - GF ---- etc., complete with all lead | Nos | 70.8 | 70.8 | 36.0 | False | None | None | False | None | False | 2548.8 | 0 | | 3359058 | 118115 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - FF ---- etc., complete with all lead | Nos | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3359059 | 118115 | None | Data Rate-5 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-GF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 35.4 | False | None | None | False | None | False | 1044.3 | 0 | | 3359060 | 118115 | None | Data Rate-06 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-FF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 23.0 | False | None | None | False | None | False | 678.5 | 0 | | 3359061 | 118115 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial- GF ---- etc., complete with all lead | Sqm | 3545.9 | 3545.9 | 13.02 | False | None | None | False | None | False | 46167.618 | 0 | | 3359062 | 118115 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial-FF ---- etc., complete with all lead | Sqm | 3581.36 | 3581.36 | 7.98 | False | None | None | False | None | False | 28579.2528 | 0 | | 3359063 | 118115 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)-GF ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 11.25 | False | None | None | False | None | False | 86964.525 | 0 | | 3359064 | 118115 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 7807.48 | 7807.48 | 10.35 | False | None | None | False | None | False | 80807.418 | 0 | | 3359065 | 118115 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 0.72 | False | None | None | False | None | False | 4858.8624 | 0 | | 3359066 | 118115 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3359067 | 118115 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-GF ---- etc., complete with all lead | Kgs | 198.24 | 198.24 | 260.82 | False | None | None | False | None | False | 51704.9568 | 0 | | 3359068 | 118115 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FF ---- etc., complete with all lead | Kgs | 200.22 | 200.22 | 199.26 | False | None | None | False | None | False | 39895.8372 | 0 | | 3359069 | 118115 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-GF ---- etc., complete with all lead | Mtr | 758.74 | 758.74 | 19.8 | False | None | None | False | None | False | 15023.052 | 0 | | 3359070 | 118115 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-FF ---- etc., complete with all lead | Mtr | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3359071 | 118115 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames- GF ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 6.3 | False | None | None | False | None | False | 23818.536 | 0 | | 3359072 | 118115 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames -FF ---- etc., complete with all lead | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3359073 | 118115 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge-GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 104.03 | False | None | None | False | None | False | 25901.3894 | 0 | | 3359074 | 118115 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge-FF
---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 118.01 | False | None | None | False | None | False | 29675.9747 | 0 | | 3359075 | 118115 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 340.2 | False | None | None | False | None | False | 140101.164 | 0 | | 3359076 | 118115 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 238.84 | False | None | None | False | None | False | 99343.1096 | 0 | | 3359077 | 118115 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 441.91 | False | None | None | False | None | False | 52145.38 | 0 | | 3359078 | 118115 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 368.14 | False | None | None | False | None | False | 43874.9252 | 0 | | 3359079 | 118115 | None | 89, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-GF ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 212.74 | False | None | None | False | None | False | 96647.782 | 0 | | 3359080 | 118115 | None | 8.9, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-FF ---- etc., complete with all lead | Sqm | 458.84 | 458.84 | 215.75 | False | None | None | False | None | False | 98994.73 | 0 | | 3359081 | 118115 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 36.98 | False | None | None | False | None | False | 12872.738 | 0 | | 3359082 | 118115 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 27.87 | False | None | None | False | None | False | 9798.5346 | 0 | | 3359083 | 118115 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-GF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 535.2 | False | None | None | False | None | False | 23998.368 | 0 | | 3359084 | 118115 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-FF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 399.0 | False | None | None | False | None | False | 17891.16 | 0 | | 3359085 | 118115 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 12.24 | False | None | None | False | None | False | 8882.568 | 0 | | 3359086 | 118115 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 8.94 | False | None | None | False | None | False | 6552.6624 | 0 | | 3359087 | 118115 | None | 7.18, V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 1.2 | False | None | None | False | None | False | 2884.632 | 0 | | 3359088 | 118115 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-GF ---- etc., complete with all lead | Mtr | 61.36 | 61.36 | 238.64 | False | None | None | False | None | False | 14642.9504 | 0 | | 3359089 | 118115 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-FF ---- etc., complete with all lead | Mtr | 61.97 | 61.97 | 160.83 | False | None | None | False | None | False | 9966.6351 | 0 | | 3359090 | 118115 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 89.09 | False | None | None | False | None | False | 123523.285 | 0 | | 3359091 | 118115 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 54.78 | False | None | None | False | None | False | 76712.2686 | 0 | | 3359092 | 118115 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent-GF
---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 31.52 | False | None | None | False | None | False | 91719.4176 | 0 | | 3359093 | 118115 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FF ---- etc., complete with all lead | Sqm | 2938.98 | 2938.98 | 3.64 | False | None | None | False | None | False | 10697.8872 | 0 | | 3359094 | 118115 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 5.86 | False | None | None | False | None | False | 6147.2572 | 0 | | 3359095 | 118115 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 5.98 | False | None | None | False | None | False | 6335.8698 | 0 | | 3359096 | 118115 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-GF ---- etc., complete with all lead | Sqm | 1642.56 | 1642.56 | 36.98 | False | None | None | False | None | False | 60741.8688 | 0 | | 3359097 | 118115 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-FF ---- etc., complete with all lead | Sqm | 1658.99 | 1658.99 | 19.91 | False | None | None | False | None | False | 33030.4909 | 0 | | 3359098 | 118115 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-GF ---- etc., complete with all lead | Sqm | 416.54 | 416.54 | 26.42 | False | None | None | False | None | False | 11004.9868 | 0 | | 3359099 | 118115 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-FF ---- etc., complete with all lead | Sqm | 420.71 | 420.71 | 33.85 | False | None | None | False | None | False | 14241.0335 | 0 | | 3359100 | 118115 | None | 11.28, V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc., complete with all lead | Kgs | 666.7 | 666.7 | 172.8 | False | None | None | False | None | False | 115205.76 | 0 | | 3359101 | 118115 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 441.91 | False | None | None | False | None | False | 57359.918 | 0 | | 3359102 | 118115 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 131.1 | 131.1 | 250.13 | False | None | None | False | None | False | 32792.043 | 0 | | 3359103 | 118115 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 196.14 | False | None | None | False | None | False | 36105.4512 | 0 | | 3359104 | 118115 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 215.75 | False | None | None | False | None | False | 40112.24 | 0 | | 3359105 | 118115 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 12.42 | False | None | None | False | None | False | 732.78 | 0 | | 3359106 | 118115 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 11.07 | False | None | None | False | None | False | 659.6613 | 0 | | 3359107 | 118115 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 12.42 | False | None | None | False | None | False | 1685.394 | 0 | | 3359108 | 118115 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 11.07 | False | None | None | False | None | False | 1517.2542 | 0 | | 3359109 | 118115 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 35.71 | False | None | None | False | None | False | 2233.3034 | 0 | | 3359110 | 118115 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 21.89 | False | None | None | False | None | False | 1382.7913 | 0 | | 3359111 | 118115 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 159.3 | 159.3 | 35.71 | False | None | None | False | None | False | 5688.603 | 0 | | 3359112 | 118115 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 160.89 | 160.89 | 21.89 | False | None | None | False | None | False | 3521.8821 | 0 | | 3359113 | 118115 | None | 15.1, V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge- FF ---- etc., complete with all lead | Sqm | 973.7 | 973.7 | 99.0 | False | None | None | False | None | False | 96396.3 | 0 | | 3359114 | 118115 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-GF ---- etc., complete with all lead | Mtr | 343.38 | 343.38 | 25.0 | False | None | None | False | None | False | 8584.5 | 0 | | 3359115 | 118115 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-FF
---- etc., complete with all lead | Mtr | 346.81 | 346.81 | 30.0 | False | None | None | False | None | False | 10404.3 | 0 | | 3359116 | 118115 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 10.0 | False | None | None | False | None | False | 1085.6 | 0 | | 3359117 | 118115 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead | Mtr | 109.65 | 109.65 | 10.0 | False | None | None | False | None | False | 1096.5 | 0 | | 3359118 | 118115 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of a000000pproved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.62 | 164.62 | 10.0 | False | None | None | False | None | False | 1646.2 | 0 | | 3359119 | 118115 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3359120 | 118115 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.02 | 164.02 | 10.0 | False | None | None | False | None | False | 1640.2 | 0 | | 3359121 | 118115 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3359122 | 118115 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 259.6 | 259.6 | 55.0 | False | None | None | False | None | False | 14278.0 | 0 | | 3359123 | 118115 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 262.2 | 262.2 | 20.0 | False | None | None | False | None | False | 5244.0 | 0 | | 3359124 | 118115 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 484.98 | 484.98 | 47.0 | False | None | None | False | None | False | 22794.06 | 0 | | 3359125 | 118115 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 489.83 | 489.83 | 30.0 | False | None | None | False | None | False | 14694.9 | 0 | | 3359126 | 118115 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - GF ---- etc., complete with all lead | Nos | 1439.6 | 1439.6 | 3.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3359127 | 118115 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF ---- etc., complete with all lead | Nos | 1454.0 | 1454.0 | 2.0 | False | None | None | False | None | False | 2908.0 | 0 | | 3359128 | 118115 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 1.0 | False | None | None | False | None | False | 329.22 | 0 | | 3359129 | 118115 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 2.0 | False | None | None | False | None | False | 665.02 | 0 | | 3359130 | 118115 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - GF ---- etc., complete with all lead | Nos | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3359131 | 118115 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - FF ---- etc., complete with all lead | Nos | 6628.79 | 6628.79 | 2.0 | False | None | None | False | None | False | 13257.58 | 0 | | 3359132 | 118115 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. - GF ---- etc., complete with all lead | Nos | 585.28 | 585.28 | 3.0 | False | None | None | False | None | False | 1755.84 | 0 | | 3359133 | 118115 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- FF ---- etc., complete with all lead | Nos | 591.13 | 591.13 | 2.0 | False | None | None | False | None | False | 1182.26 | 0 | | 3359134 | 118115 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - GF ---- etc., complete with all lead | Nos | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3359135 | 118115 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF ---- etc., complete with all lead | Nos | 7123.39 | 7123.39 | 1.0 | False | None | None | False | None | False | 7123.39 | 0 | | 3359136 | 118115 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - GF ---- etc., complete with all lead | Each | 4185.46 | 4185.46 | 1.0 | False | None | None | False | None | False | 4185.46 | 0 | | 3359137 | 118115 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - FF ---- etc., complete with all lead | Each | 4227.31 | 4227.31 | 1.0 | False | None | None | False | None | False | 4227.31 | 0 | | 3359138 | 118115 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF ---- etc., complete with all lead | Nos | 5255.72 | 5255.72 | 1.0 | False | None | None | False | None | False | 5255.72 | 0 | | 3359139 | 118115 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - FF ---- etc., complete with all lead | Nos | 5308.28 | 5308.28 | 1.0 | False | None | None | False | None | False | 5308.28 | 0 | | 3359140 | 118115 | None | V-2 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm - GF ---- etc., complete with all lead | Nos | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3359141 | 118115 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - GF ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 2.0 | False | None | None | False | None | False | 705.64 | 0 | | 3359142 | 118115 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - FF ---- etc., complete with all lead | Nos | 356.24 | 356.24 | 2.0 | False | None | None | False | None | False | 712.48 | 0 | | 3359143 | 118115 | None | V-2 14.10.1.4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead | Nos | 5758.78 | 5758.78 | 1.0 | False | None | None | False | None | False | 5758.78 | 0 | | 3359144 | 118115 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF ---- etc., complete with all lead | Nos | 3636.76 | 3636.76 | 3.0 | False | None | None | False | None | False | 10910.28 | 0 | | 3359145 | 118115 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - FF ---- etc., complete with all lead | Nos | 3673.13 | 3673.13 | 2.0 | False | None | None | False | None | False | 7346.26 | 0 | | 3359146 | 118115 | None | V-2 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 | | 3359147 | 118115 | None | V-2 13.33.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 256.06 | 256.06 | 20.0 | False | None | None | False | None | False | 5121.2 | 0 | | 3359148 | 118115 | None | V-2 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 562.86 | 562.86 | 50.0 | False | None | None | False | None | False | 28143.0 | 0 | | 3359149 | 118115 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 364.62 | 364.62 | 10.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3359150 | 118115 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 368.27 | 368.27 | 15.0 | False | None | None | False | None | False | 5524.05 | 0 | | 3359151 | 118115 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 | | 3359152 | 118115 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 451.69 | 451.69 | 50.0 | False | None | None | False | None | False | 22584.5 | 0 | | 3359153 | 118115 | None | V-2 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 568.49 | 568.49 | 20.0 | False | None | None | False | None | False | 11369.8 | 0 | | 3359154 | 118115 | None | V-2 13.4.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - GF ---- etc., complete with all lead | Each | 337.48 | 337.48 | 3.0 | False | None | None | False | None | False | 1012.44 | 0 | | 3359155 | 118115 | None | V-2 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - FF ---- etc., complete with all lead | Each | 340.85 | 340.85 | 2.0 | False | None | None | False | None | False | 681.7 | 0 | | 3359156 | 118115 | None | V-2 739 | Providing and fixing 20mm thick grey granite,.For Urinals partition - GF ---- etc., complete with all lead | Sqm | 1121.0 | 1121.0 | 5.0 | False | None | None | False | None | False | 5605.0 | 0 | | 3359157 | 118115 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 10.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3359158 | 118115 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - FF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 3359159 | 118115 | None | Data Rate-07 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 6.0 | False | None | None | False | None | False | 927.48 | 0 | | 3359160 | 118115 | None | Data Rate-08 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 6.0 | False | None | None | False | None | False | 1111.56 | 0 | | 3359161 | 118115 | None | Data Rate-09 | Air Vent Cowel 75mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 10.0 | False | None | None | False | None | False | 4130.0 | 0 | | 3359162 | 118115 | None | Data Rate-10 | Air Vent Cowel 110mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 10.0 | False | None | None | False | None | False | 5900.0 | 0 | | 3359163 | 118115 | None | Data Rate-11 | Supplying and fixing Counter basin consisting of s GF Toilet & FF Toilet. complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 5664.0 | 5664.0 | 5.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3359164 | 118115 | None | Data Rate-12 | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 | | 3359165 | 118115 | None | Data Rate-13 | Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confiMing to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 1996.56 | 1996.56 | 2.0 | False | None | None | False | None | False | 3993.12 | 0 | | 3359166 | 118115 | None | Data Rate-14 | Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick confoMed to IS 1239 etc., complete as directed by the engineer Incharge. ---- etc., complete with all lead | Nos | 767.0 | 767.0 | 10.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3359167 | 118115 | None | Data Rate-15 | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 3540.0 | 3540.0 | 2.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3359168 | 118115 | None | V-5 10.2.4 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead | Mtr | 679.68 | 679.68 | 50.0 | False | None | None | False | None | False | 33984.0 | 0 | | 3359169 | 118115 | None | V-5 10.2.5 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 200mm dia. ---- etc., complete with all lead | Mtr | 980.58 | 980.58 | 10.0 | False | None | None | False | None | False | 9805.8 | 0 | | 3359170 | 118115 | None | V-5 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete with all lead | Nos | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 3359171 | 118115 | None | V-2 13.58 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).10cms x 10cms ---- etc., complete with all lead | Nos | 408.28 | 408.28 | 4.0 | False | None | None | False | None | False | 1633.12 | 0 | | 3359172 | 118115 | None | V-2 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead | Nos | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3359173 | 118115 | None | V-2 6.3 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- etc., complete with all lead | Cum | 10471.32 | 10471.32 | 5.3 | False | None | None | False | None | False | 55497.996 | 0 | | 3359174 | 118115 | None | V-2 2.3.1 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid Seperately) ---- etc., complete with all lead | Cum | 8207.25 | 8207.25 | 11.75 | False | None | None | False | None | False | 96435.1875 | 0 | | 3359175 | 118115 | None | 15.24 2018-19 | KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead | Sqm | 5.9 | 5.9 | 16.6 | False | None | None | False | None | False | 97.94 | 0 | | 3359176 | 118115 | None | Data Rate-16 | Providing and fixing M.S.steel cover for tank opening including materials, labour etc., complete. ---- etc., complete with all lead | Nos | 1770.0 | 1770.0 | 4.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3359177 | 118115 | None | V-2 137 | Providing and Filling of Brick bats 25 to 100 mm Soak Pit etc. complete as per directions of the Engineer-in charge ---- etc., complete with all lead | Cum | 944.0 | 944.0 | 3.5 | False | None | None | False | None | False | 3304.0 | 0 | | 3359178 | 118115 | None | V-2 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 13.5 | False | None | None | False | None | False | 38646.18 | 0 | | 3359179 | 118115 | None | V-2 19.7.1 | Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 47.27 | False | None | None | False | None | False | 26885.2852 | 0 | | 3359180 | 118115 | None | V-2 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 26.64 | False | None | None | False | None | False | 7544.448 | 0 | | 3359181 | 118115 | None | V-2 19.51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Unit | 647.82 | 647.82 | 5.0 | False | None | None | False | None | False | 3239.1 | 0 |
| | 1719380946000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT KURAGUNDA - ELECTRICAL WORK (SLICE-08) | 446049.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3359182 | 118116 | None | 2.2.1, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point upto 3 Mtr from tapping point to out let via switch ---- etc., complete with all lead | Each | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3359183 | 118116 | None | 2.2.2, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3 Mtr upto 6Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3359184 | 118116 | None | 2.2.3, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.c) Long point above 6mtr upto 10Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 654.9 | 654.9 | 15.0 | False | None | None | False | None | False | 9823.5 | 0 | | 3359185 | 118116 | None | 3.4.2, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3 Way
---- etc., complete with all lead | Each | 187.62 | 187.62 | 21.0 | False | None | None | False | None | False | 3940.02 | 0 | | 3359186 | 118116 | None | 3.4.3, V-2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 4-5Way
---- etc., complete with all lead | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3359187 | 118116 | None | 3.4.4, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6Way
---- etc., complete with all lead | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3359188 | 118116 | None | 3.4.5, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3359189 | 118116 | None | 3.4.6, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3359190 | 118116 | None | 3.5.2, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module
---- etc., complete with all lead | Each | 189.98 | 189.98 | 21.0 | False | None | None | False | None | False | 3989.58 | 0 | | 3359191 | 118116 | None | 3.5.3, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4-5 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3359192 | 118116 | None | 3.5.4, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3359193 | 118116 | None | 3.5.5, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3359194 | 118116 | None | 3.5.6, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3359195 | 118116 | None | 3.6.1, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps one way. ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 3359196 | 118116 | None | 3.6.2, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3359197 | 118116 | None | 3.6.3, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps 3way socket. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3359198 | 118116 | None | 3.6.9, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Bell push ---- etc., complete with all lead | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3359199 | 118116 | None | 3.6.4, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3359200 | 118116 | None | 3.6.10, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3359201 | 118116 | None | 3.6.11, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3359202 | 118116 | None | 3.6.12, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3359203 | 118116 | None | 12.2.1, V-6 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.-Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3359204 | 118116 | None | 1.13, V-6 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | Nos | 192.34 | 192.34 | 12.0 | False | None | None | False | None | False | 2308.08 | 0 | | 3359205 | 118116 | None | 1.2.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 320.0 | False | None | None | False | None | False | 24921.6 | 0 | | 3359206 | 118116 | None | 1.2.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3359207 | 118116 | None | 1.3.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-19/20mm dia 2mm thick
---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 110.0 | False | None | None | False | None | False | 8826.4 | 0 | | 3359208 | 118116 | None | 1.3.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-25mm dia 2mm thick
---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 95.0 | False | None | None | False | None | False | 8855.9 | 0 | | 3359209 | 118116 | None | 2.3.2, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-1.5 sqmm ---- etc., complete with all lead | Mtr | 30.68 | 30.68 | 125.0 | False | None | None | False | None | False | 3835.0 | 0 | | 3359210 | 118116 | None | 2.3.3, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-2.5 sqmm ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3359211 | 118116 | None | 2.3.4, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-4 sqmm ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 380.0 | False | None | None | False | None | False | 28249.2 | 0 | | 3359212 | 118116 | None | 5.19.9, V-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure- II- Double Door-12 Way SP & N
---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3359213 | 118116 | None | 5.18.1, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 etc.-6-32Amps SP
---- etc., complete with all lead | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3359214 | 118116 | None | 5.20.1, V-6 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3359215 | 118116 | None | 32.03, BSR-32 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 4 core 10 sqmm ---- etc., complete with all lead | Km | 175362.16 | 175362.16 | 0.1 | False | None | None | False | None | False | 17536.216 | 0 | | 3359216 | 118116 | None | 31.05, BSR -31 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 19067.62 | 19067.62 | 0.1 | False | None | None | False | None | False | 1906.762 | 0 | | 3359217 | 118116 | None | 6.6.2, Ele SR-2019-20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.-In soil (hard)
---- etc., complete with all lead | Mtr | 120.36 | 120.36 | 20.0 | False | None | None | False | None | False | 2407.2 | 0 | | 3359218 | 118116 | None | 6.9.1- V-6 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.-40mm
---- etc., complete with all lead | Mtr | 395.3 | 395.3 | 5.0 | False | None | None | False | None | False | 1976.5 | 0 | | 3359219 | 118116 | None | 12.56, V-6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.
---- etc., complete with all lead | Nos | 4141.8 | 4141.8 | 2.0 | False | None | None | False | None | False | 8283.6 | 0 | | 3359220 | 118116 | None | 12.58.1, V-6 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 45.0 | False | None | None | False | None | False | 4354.2 | 0 | | 3359221 | 118116 | None | 11.3.1, V-6 | Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition- LED light fighting 1 x4- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3359222 | 118116 | None | 11.5.2, V-6 | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED square or round down light 10-12W
---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3359223 | 118116 | None | 11.11.3, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3359224 | 118116 | None | 11.11.7, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- etc., complete with all lead | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3359225 | 118116 | None | 11.8.2, V-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 40watts
---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3359226 | 118116 | None | 12.27, V-6 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Nos | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3359227 | 118116 | None | 6.1, V-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3359228 | 118116 | None | 6.3.1, V-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.-48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3359229 | 118116 | None | 12.46, V-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin. ---- etc., complete with all lead | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3359230 | 118116 | None | 13.7.1, V-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3359231 | 118116 | None | 13.11, V-6 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- etc., complete with all lead | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3359232 | 118116 | None | 13.13, V-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3359233 | 118116 | None | 13.4.1, V-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.-Single bracket 1.5 Mtr. Length
---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3359234 | 118116 | None | 13.5, V-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc., complete with all lead | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3359235 | 118116 | None | 5.42.2, V-6 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete-16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 3359236 | 118116 | None | 5.40.1, V-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.-100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3359237 | 118116 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -40x40x6mm ---- etc., complete with all lead | Mtr | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3359238 | 118116 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -50x100x50x6mm C channel ---- etc., complete with all lead | Mtr | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3359239 | 118116 | None | 5.15.9, V-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR POLE-100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3359240 | 118116 | None | 5.18.4, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898- 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3359241 | 118116 | None | 5.18.9, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-50-63Amps TPN ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3359242 | 118116 | None | 5.7.2, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-32Amps
---- etc., complete with all lead | Each | 185.26 | 185.26 | 3.0 | False | None | None | False | None | False | 555.78 | 0 | | 3359243 | 118116 | None | 5.7.3, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-63Amps
---- etc., complete with all lead | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3359244 | 118116 | None | 5.12.1, V-6 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-63Amps ---- etc., complete with all lead | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3359245 | 118116 | None | 5.27, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- etc., complete with all lead | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3359246 | 118116 | None | 5.28, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- etc., complete with all lead | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3359247 | 118116 | None | 5.29, V-6 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
---- etc., complete with all lead | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3359248 | 118116 | None | 5.38, V-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 12/24v D.C
---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3359249 | 118116 | None | 5.34, V-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3359250 | 118116 | None | 5.30, V-6 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 2.0 | False | None | None | False | None | False | 3256.8 | 0 |
| | 1719380947000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT DUDHIHALLI - CIVIL & WATER SUPPLY WORK ( SLICE-09) | 5988594.67 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3359251 | 118117 | None | 1.12, V-1 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 29.03 | False | None | None | False | None | False | 3254.263 | 0 | | 3359252 | 118117 | None | 1.14.1, V-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 172.94 | False | None | None | False | None | False | 20815.0584 | 0 | | 3359253 | 118117 | None | 1.15.1, V-1 | Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work
---- etc., complete with all lead | Cum | 428.34 | 428.34 | 14.56 | False | None | None | False | None | False | 6236.6304 | 0 | | 3359254 | 118117 | None | 1.1B, V-3 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)
---- etc., complete with all lead | Cum | 140.42 | 140.42 | 34.56 | False | None | None | False | None | False | 4852.9152 | 0 | | 3359255 | 118117 | None | 1.5.1, V-1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
---- etc., complete with all lead | Cum | 352.82 | 352.82 | 34.0 | False | None | None | False | None | False | 11995.88 | 0 | | 3359256 | 118117 | None | 1.9, V-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 313.88 | 313.88 | 42.0 | False | None | None | False | None | False | 13182.96 | 0 | | 3359257 | 118117 | None | 4.1, V-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 110.22 | False | None | None | False | None | False | 15347.0328 | 0 | | 3359258 | 118117 | None | 1.8, V-1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
---- etc., complete with all lead | Cum | 559.32 | 559.32 | 142.53 | False | None | None | False | None | False | 79719.8796 | 0 | | 3359259 | 118117 | None | 2.1.3, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 25.92 | False | None | None | False | None | False | 183177.1584 | 0 | | 3359260 | 118117 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Concrete (Formwork,
Centering & Scaffolding Charges of 8%) ---- etc., complete with all lead | Cum | 8012.15 | 8012.15 | 37.67 | False | None | None | False | None | False | 301817.6905 | 0 | | 3359261 | 118117 | None | 2.2.1, V-1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Pedestral Concrete (Formwork,
Centering & Scaffolding Charges of 10%)
---- etc., complete with all lead | Cum | 8160.53 | 8160.53 | 1.75 | False | None | None | False | None | False | 14280.9275 | 0 | | 3359262 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%) - GF
---- etc., complete with all lead | Cum | 13299.78 | 13299.78 | 6.35 | False | None | None | False | None | False | 84453.603 | 0 | | 3359263 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Concrete (Formwork,
Centering & Scaffolding Charges of 70%)- FF ---- etc., complete with all lead | Cum | 13432.78 | 13432.78 | 3.19 | False | None | None | False | None | False | 42850.5682 | 0 | | 3359264 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam, RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%) - GF ---- etc., complete with all lead | Cum | 11735.1 | 11735.1 | 32.27 | False | None | None | False | None | False | 378691.677 | 0 | | 3359265 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Slab, Stair Case Concrete (Formwork,Centering & Scaffolding Charges of 50%)- FF
---- etc., complete with all lead | Cum | 11852.45 | 11852.45 | 10.26 | False | None | None | False | None | False | 121606.137 | 0 | | 3359266 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam, Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- GF
---- etc., complete with all lead | Cum | 12517.44 | 12517.44 | 9.21 | False | None | None | False | None | False | 115285.6224 | 0 | | 3359267 | 118117 | None | 2.5.1, V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For RCC Roof Beam ,Lintel Concrete (Formwork,Centering & Scaffolding Charges of 60%)- FF
---- etc., complete with all lead | Cum | 12642.61 | 12642.61 | 6.71 | False | None | None | False | None | False | 84831.9131 | 0 | | 3359268 | 118117 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates- GF
---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 1.59 | False | None | None | False | None | False | 11664.3354 | 0 | | 3359269 | 118117 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF
---- etc., complete with all lead | Cum | 7409.42 | 7409.42 | 1.21 | False | None | None | False | None | False | 8965.3982 | 0 | | 3359270 | 118117 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - GF ---- etc., complete with all lead | Cum | 9014.65 | 9014.65 | 0.43 | False | None | None | False | None | False | 3876.2995 | 0 | | 3359271 | 118117 | None | 2.1.4, V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates - FF ---- etc., complete with all lead | Cum | 10743.66 | 10743.66 | 0.43 | False | None | None | False | None | False | 4619.7738 | 0 | | 3359272 | 118117 | None | Data rate -1 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges). - GF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.63 | False | None | None | False | None | False | 1334.462 | 0 | | 3359273 | 118117 | None | Data Rate - 2 | Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 using clean granite or trap jelly of 20mm and down size with necessary reinforcements at 20cms centre to centre as per design including form of work, centring, curing, etc., complete (exclusive of cost of steel and fabrication charges).- FF ---- etc., complete with all lead | Sqm | 507.4 | 507.4 | 2.56 | False | None | None | False | None | False | 1298.944 | 0 | | 3359274 | 118117 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.- GF
---- etc., complete with all lead | MT | 105559.26 | 105559.26 | 8.815 | False | None | None | False | None | False | 930504.8769 | 0 | | 3359275 | 118117 | None | 2.11a, V-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- FF
---- etc., complete with all lead | MT | 106614.85 | 106614.85 | 2.02 | False | None | None | False | None | False | 215361.997 | 0 | | 3359276 | 118117 | None | Data Rate - 3 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. - GF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 27.45 | False | None | None | False | None | False | 2429.325 | 0 | | 3359277 | 118117 | None | Data Rate - 4 | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge - FF ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 28.4 | False | None | None | False | None | False | 2513.4 | 0 | | 3359278 | 118117 | None | 5.4, V-2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 8.04 | False | None | None | False | None | False | 60613.7208 | 0 | | 3359279 | 118117 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF
---- etc., complete with all lead | Sqm | 1545.8 | 1545.8 | 141.17 | False | None | None | False | None | False | 218220.586 | 0 | | 3359280 | 118117 | None | 6.32, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1561.26 | 1561.26 | 164.72 | False | None | None | False | None | False | 257170.7472 | 0 | | 3359281 | 118117 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- GF ---- etc., complete with all lead | Sqm | 1302.72 | 1302.72 | 20.8 | False | None | None | False | None | False | 27096.576 | 0 | | 3359282 | 118117 | None | 6.34, V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.- FF ---- etc., complete with all lead | Sqm | 1315.75 | 1315.75 | 36.3 | False | None | None | False | None | False | 47761.725 | 0 | | 3359283 | 118117 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.-GF ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.39 | False | None | None | False | None | False | 45474.663 | 0 | | 3359284 | 118117 | None | 12.13.1, V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.- FF ---- etc., complete with all lead | Cum | 117767.72 | 117767.72 | 0.16 | False | None | None | False | None | False | 18842.8352 | 0 | | 3359285 | 118117 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. - GF ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 6.0 | False | None | None | False | None | False | 7193.28 | 0 | | 3359286 | 118117 | None | 12.51, V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.- FF ---- etc., complete with all lead | Nos | 1210.87 | 1210.87 | 4.0 | False | None | None | False | None | False | 4843.48 | 0 | | 3359287 | 118117 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1241.36 | 1241.36 | 6.0 | False | None | None | False | None | False | 7448.16 | 0 | | 3359288 | 118117 | None | 12.60, V-2 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.-FF ---- etc., complete with all lead | Nos | 1253.77 | 1253.77 | 4.0 | False | None | None | False | None | False | 5015.08 | 0 | | 3359289 | 118117 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.-GF ---- etc., complete with all lead | Nos | 1168.2 | 1168.2 | 6.0 | False | None | None | False | None | False | 7009.2 | 0 | | 3359290 | 118117 | None | 12.61, V-2 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.- FF ---- etc., complete with all lead | Nos | 1179.88 | 1179.88 | 4.0 | False | None | None | False | None | False | 4719.52 | 0 | | 3359291 | 118117 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete - GF ---- etc., complete with all lead | Nos | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 | | 3359292 | 118117 | None | 12.62, V-2 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- FF ---- etc., complete with all lead | Nos | 282.46 | 282.46 | 8.0 | False | None | None | False | None | False | 2259.68 | 0 | | 3359293 | 118117 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -GF ---- etc., complete with all lead | Nos | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 | | 3359294 | 118117 | None | 12.63, V-2 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete -FF ---- etc., complete with all lead | Nos | 154.93 | 154.93 | 8.0 | False | None | None | False | None | False | 1239.44 | 0 | | 3359295 | 118117 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms etc. complete - GF ---- etc., complete with all lead | Nos | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 | | 3359296 | 118117 | None | 12.64, V-2 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. etc complete - FF
---- etc., complete with all lead | Nos | 65.55 | 65.55 | 4.0 | False | None | None | False | None | False | 262.2 | 0 | | 3359297 | 118117 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) -GF ---- etc., complete with all lead | Nos | 324.5 | 324.5 | 12.0 | False | None | None | False | None | False | 3894.0 | 0 | | 3359298 | 118117 | None | 12.75.1, V-2 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) - FF ---- etc., complete with all lead | Nos | 327.75 | 327.75 | 8.0 | False | None | None | False | None | False | 2622.0 | 0 | | 3359299 | 118117 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - GF ---- etc., complete with all lead | Nos | 70.8 | 70.8 | 36.0 | False | None | None | False | None | False | 2548.8 | 0 | | 3359300 | 118117 | None | 10.6.3, V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm - FF ---- etc., complete with all lead | Nos | 71.51 | 71.51 | 4.0 | False | None | None | False | None | False | 286.04 | 0 | | 3359301 | 118117 | None | Data Rate-5 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-GF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 35.4 | False | None | None | False | None | False | 1044.3 | 0 | | 3359302 | 118117 | None | Data Rate-06 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications.-FF ---- etc., complete with all lead | Rmtr | 29.5 | 29.5 | 23.0 | False | None | None | False | None | False | 678.5 | 0 | | 3359303 | 118117 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial- GF ---- etc., complete with all lead | Sqm | 3545.9 | 3545.9 | 13.02 | False | None | None | False | None | False | 46167.618 | 0 | | 3359304 | 118117 | None | 12.57.3, V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial-FF ---- etc., complete with all lead | Sqm | 3581.36 | 3581.36 | 7.98 | False | None | None | False | None | False | 28579.2528 | 0 | | 3359305 | 118117 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)-GF ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 11.25 | False | None | None | False | None | False | 86964.525 | 0 | | 3359306 | 118117 | None | 12.89, V-2 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size -1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 7807.48 | 7807.48 | 10.35 | False | None | None | False | None | False | 80807.418 | 0 | | 3359307 | 118117 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) -GF ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 0.72 | False | None | None | False | None | False | 4858.8624 | 0 | | 3359308 | 118117 | None | 12.85, V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FF ---- etc., complete with all lead | Sqm | 6815.9 | 6815.9 | 0.72 | False | None | None | False | None | False | 4907.448 | 0 | | 3359309 | 118117 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-GF ---- etc., complete with all lead | Kgs | 198.24 | 198.24 | 260.82 | False | None | None | False | None | False | 51704.9568 | 0 | | 3359310 | 118117 | None | 11.34a, V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding-FF ---- etc., complete with all lead | Kgs | 200.22 | 200.22 | 199.26 | False | None | None | False | None | False | 39895.8372 | 0 | | 3359311 | 118117 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-GF ---- etc., complete with all lead | Mtr | 758.74 | 758.74 | 19.8 | False | None | None | False | None | False | 15023.052 | 0 | | 3359312 | 118117 | None | 12.96, V-2 | Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame.-FF ---- etc., complete with all lead | Mtr | 766.33 | 766.33 | 9.9 | False | None | None | False | None | False | 7586.667 | 0 | | 3359313 | 118117 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames- GF ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 6.3 | False | None | None | False | None | False | 23818.536 | 0 | | 3359314 | 118117 | None | 12.97.1, V-2 | Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames -FF ---- etc., complete with all lead | Sqm | 3818.53 | 3818.53 | 3.15 | False | None | None | False | None | False | 12028.3695 | 0 | | 3359315 | 118117 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge-GF ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 104.03 | False | None | None | False | None | False | 25901.3894 | 0 | | 3359316 | 118117 | None | 8.10, V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge-FF
---- etc., complete with all lead | Sqm | 251.47 | 251.47 | 118.01 | False | None | None | False | None | False | 29675.9747 | 0 | | 3359317 | 118117 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-GF ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 340.2 | False | None | None | False | None | False | 140101.164 | 0 | | 3359318 | 118117 | None | 8.5.2, V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Inside)-FF ---- etc., complete with all lead | Sqm | 415.94 | 415.94 | 238.84 | False | None | None | False | None | False | 99343.1096 | 0 | | 3359319 | 118117 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 441.91 | False | None | None | False | None | False | 52145.38 | 0 | | 3359320 | 118117 | None | 8.51, V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 119.18 | 119.18 | 368.14 | False | None | None | False | None | False | 43874.9252 | 0 | | 3359321 | 118117 | None | 89, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-GF ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 212.74 | False | None | None | False | None | False | 96647.782 | 0 | | 3359322 | 118117 | None | 8.9, V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside)-FF ---- etc., complete with all lead | Sqm | 458.84 | 458.84 | 215.75 | False | None | None | False | None | False | 98994.73 | 0 | | 3359323 | 118117 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 36.98 | False | None | None | False | None | False | 12872.738 | 0 | | 3359324 | 118117 | None | 8.2.1, V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 351.58 | 351.58 | 27.87 | False | None | None | False | None | False | 9798.5346 | 0 | | 3359325 | 118117 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-GF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 535.2 | False | None | None | False | None | False | 23998.368 | 0 | | 3359326 | 118117 | None | 8.16.2, V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment)-FF ---- etc., complete with all lead | Mtr | 44.84 | 44.84 | 399.0 | False | None | None | False | None | False | 17891.16 | 0 | | 3359327 | 118117 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-GF ---- etc., complete with all lead | Sqm | 725.7 | 725.7 | 12.24 | False | None | None | False | None | False | 8882.568 | 0 | | 3359328 | 118117 | None | 15.7, V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)-FF ---- etc., complete with all lead | Sqm | 732.96 | 732.96 | 8.94 | False | None | None | False | None | False | 6552.6624 | 0 | | 3359329 | 118117 | None | 7.18, V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FF ---- etc., complete with all lead | Cum | 2403.86 | 2403.86 | 1.2 | False | None | None | False | None | False | 2884.632 | 0 | | 3359330 | 118117 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-GF ---- etc., complete with all lead | Mtr | 61.36 | 61.36 | 238.64 | False | None | None | False | None | False | 14642.9504 | 0 | | 3359331 | 118117 | None | 8.79, V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.-FF ---- etc., complete with all lead | Mtr | 61.97 | 61.97 | 160.83 | False | None | None | False | None | False | 9966.6351 | 0 | | 3359332 | 118117 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-GF ---- etc., complete with all lead | Sqm | 1386.5 | 1386.5 | 89.09 | False | None | None | False | None | False | 123523.285 | 0 | | 3359333 | 118117 | None | 9.17.2, V-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.-FF ---- etc., complete with all lead | Sqm | 1400.37 | 1400.37 | 54.78 | False | None | None | False | None | False | 76712.2686 | 0 | | 3359334 | 118117 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent-GF
---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 31.52 | False | None | None | False | None | False | 91719.4176 | 0 | | 3359335 | 118117 | None | 9.23, V-2 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.-FF ---- etc., complete with all lead | Sqm | 2938.98 | 2938.98 | 3.64 | False | None | None | False | None | False | 10697.8872 | 0 | | 3359336 | 118117 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-GF ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 5.86 | False | None | None | False | None | False | 6147.2572 | 0 | | 3359337 | 118117 | None | 9.11, V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FF ---- etc., complete with all lead | Sqm | 1059.51 | 1059.51 | 5.98 | False | None | None | False | None | False | 6335.8698 | 0 | | 3359338 | 118117 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-GF ---- etc., complete with all lead | Sqm | 1642.56 | 1642.56 | 36.98 | False | None | None | False | None | False | 60741.8688 | 0 | | 3359339 | 118117 | None | 9.39, V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.-FF ---- etc., complete with all lead | Sqm | 1658.99 | 1658.99 | 19.91 | False | None | None | False | None | False | 33030.4909 | 0 | | 3359340 | 118117 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-GF ---- etc., complete with all lead | Sqm | 416.54 | 416.54 | 26.42 | False | None | None | False | None | False | 11004.9868 | 0 | | 3359341 | 118117 | None | 9.14, V-2 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.-FF ---- etc., complete with all lead | Sqm | 420.71 | 420.71 | 33.85 | False | None | None | False | None | False | 14241.0335 | 0 | | 3359342 | 118117 | None | 11.28, V-2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc., complete with all lead | Kgs | 666.7 | 666.7 | 172.8 | False | None | None | False | None | False | 115205.76 | 0 | | 3359343 | 118117 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-GF ---- etc., complete with all lead | Sqm | 129.8 | 129.8 | 441.91 | False | None | None | False | None | False | 57359.918 | 0 | | 3359344 | 118117 | None | 8.54.2, V-2 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.-FF ---- etc., complete with all lead | Sqm | 131.1 | 131.1 | 250.13 | False | None | None | False | None | False | 32792.043 | 0 | | 3359345 | 118117 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 196.14 | False | None | None | False | None | False | 36105.4512 | 0 | | 3359346 | 118117 | None | 8.32, V-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FF ---- etc., complete with all lead | Sqm | 185.92 | 185.92 | 215.75 | False | None | None | False | None | False | 40112.24 | 0 | | 3359347 | 118117 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 12.42 | False | None | None | False | None | False | 732.78 | 0 | | 3359348 | 118117 | None | 8.34.3, V-2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 59.59 | 59.59 | 11.07 | False | None | None | False | None | False | 659.6613 | 0 | | 3359349 | 118117 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 12.42 | False | None | None | False | None | False | 1685.394 | 0 | | 3359350 | 118117 | None | 8.40, V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 137.06 | 137.06 | 11.07 | False | None | None | False | None | False | 1517.2542 | 0 | | 3359351 | 118117 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- GF ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 35.71 | False | None | None | False | None | False | 2233.3034 | 0 | | 3359352 | 118117 | None | 8.34.1, V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 63.17 | 63.17 | 21.89 | False | None | None | False | None | False | 1382.7913 | 0 | | 3359353 | 118117 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GF ---- etc., complete with all lead | Sqm | 159.3 | 159.3 | 35.71 | False | None | None | False | None | False | 5688.603 | 0 | | 3359354 | 118117 | None | 8.47, V-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- FF ---- etc., complete with all lead | Sqm | 160.89 | 160.89 | 21.89 | False | None | None | False | None | False | 3521.8821 | 0 | | 3359355 | 118117 | None | 15.1, V-2 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge- FF ---- etc., complete with all lead | Sqm | 973.7 | 973.7 | 99.0 | False | None | None | False | None | False | 96396.3 | 0 | | 3359356 | 118117 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-GF ---- etc., complete with all lead | Mtr | 343.38 | 343.38 | 25.0 | False | None | None | False | None | False | 8584.5 | 0 | | 3359357 | 118117 | None | 13.48, V-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter-FF
---- etc., complete with all lead | Mtr | 346.81 | 346.81 | 30.0 | False | None | None | False | None | False | 10404.3 | 0 | | 3359358 | 118117 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 10.0 | False | None | None | False | None | False | 1085.6 | 0 | | 3359359 | 118117 | None | V-2 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead | Mtr | 109.65 | 109.65 | 10.0 | False | None | None | False | None | False | 1096.5 | 0 | | 3359360 | 118117 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of a000000pproved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.62 | 164.62 | 10.0 | False | None | None | False | None | False | 1646.2 | 0 | | 3359361 | 118117 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3359362 | 118117 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - GF ---- etc., complete with all lead | Mtr | 164.02 | 164.02 | 10.0 | False | None | None | False | None | False | 1640.2 | 0 | | 3359363 | 118117 | None | V-5 16.7.4 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead | Mtr | 165.66 | 165.66 | 10.0 | False | None | None | False | None | False | 1656.6 | 0 | | 3359364 | 118117 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 259.6 | 259.6 | 60.0 | False | None | None | False | None | False | 15576.0 | 0 | | 3359365 | 118117 | None | V-5 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Waste line PVC pipes 75mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 262.2 | 262.2 | 20.0 | False | None | None | False | None | False | 5244.0 | 0 | | 3359366 | 118117 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - GF ---- etc., complete with all lead | Mtr | 484.98 | 484.98 | 47.0 | False | None | None | False | None | False | 22794.06 | 0 | | 3359367 | 118117 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: Sanitary Line PVC pipes 110mm dia., 6 kg/sqcm & class 3 - FF ---- etc., complete with all lead | Mtr | 489.83 | 489.83 | 30.0 | False | None | None | False | None | False | 14694.9 | 0 | | 3359368 | 118117 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - GF ---- etc., complete with all lead | Nos | 1439.6 | 1439.6 | 3.0 | False | None | None | False | None | False | 4318.8 | 0 | | 3359369 | 118117 | None | V-2 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF ---- etc., complete with all lead | Nos | 1454.0 | 1454.0 | 2.0 | False | None | None | False | None | False | 2908.0 | 0 | | 3359370 | 118117 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - GF ---- etc., complete with all lead | Nos | 329.22 | 329.22 | 1.0 | False | None | None | False | None | False | 329.22 | 0 | | 3359371 | 118117 | None | V-2 13.9.2 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter - FF ---- etc., complete with all lead | Nos | 332.51 | 332.51 | 2.0 | False | None | None | False | None | False | 665.02 | 0 | | 3359372 | 118117 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - GF ---- etc., complete with all lead | Nos | 6563.16 | 6563.16 | 1.0 | False | None | None | False | None | False | 6563.16 | 0 | | 3359373 | 118117 | None | V-2 14.22B | Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. - FF ---- etc., complete with all lead | Nos | 6628.79 | 6628.79 | 2.0 | False | None | None | False | None | False | 13257.58 | 0 | | 3359374 | 118117 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. - GF ---- etc., complete with all lead | Nos | 585.28 | 585.28 | 3.0 | False | None | None | False | None | False | 1755.84 | 0 | | 3359375 | 118117 | None | V-2 14.40.2 | Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- FF ---- etc., complete with all lead | Nos | 591.13 | 591.13 | 2.0 | False | None | None | False | None | False | 1182.26 | 0 | | 3359376 | 118117 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - GF ---- etc., complete with all lead | Nos | 7052.86 | 7052.86 | 1.0 | False | None | None | False | None | False | 7052.86 | 0 | | 3359377 | 118117 | None | V-2 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF ---- etc., complete with all lead | Nos | 7123.39 | 7123.39 | 1.0 | False | None | None | False | None | False | 7123.39 | 0 | | 3359378 | 118117 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - GF ---- etc., complete with all lead | Each | 4185.46 | 4185.46 | 1.0 | False | None | None | False | None | False | 4185.46 | 0 | | 3359379 | 118117 | None | V-2 20.44.2 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm - FF ---- etc., complete with all lead | Each | 4227.31 | 4227.31 | 1.0 | False | None | None | False | None | False | 4227.31 | 0 | | 3359380 | 118117 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF ---- etc., complete with all lead | Nos | 5255.72 | 5255.72 | 1.0 | False | None | None | False | None | False | 5255.72 | 0 | | 3359381 | 118117 | None | V-2 14.4.1 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - FF ---- etc., complete with all lead | Nos | 5308.28 | 5308.28 | 1.0 | False | None | None | False | None | False | 5308.28 | 0 | | 3359382 | 118117 | None | V-2 14.11.2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm - GF ---- etc., complete with all lead | Nos | 5996.76 | 5996.76 | 1.0 | False | None | None | False | None | False | 5996.76 | 0 | | 3359383 | 118117 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - GF ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 2.0 | False | None | None | False | None | False | 705.64 | 0 | | 3359384 | 118117 | None | V-2 13.3.1 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore - FF ---- etc., complete with all lead | Nos | 356.24 | 356.24 | 2.0 | False | None | None | False | None | False | 712.48 | 0 | | 3359385 | 118117 | None | V-2 14.10.1.4 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead | Nos | 5758.78 | 5758.78 | 1.0 | False | None | None | False | None | False | 5758.78 | 0 | | 3359386 | 118117 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF ---- etc., complete with all lead | Nos | 3636.76 | 3636.76 | 3.0 | False | None | None | False | None | False | 10910.28 | 0 | | 3359387 | 118117 | None | V-2 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - FF ---- etc., complete with all lead | Nos | 3673.13 | 3673.13 | 2.0 | False | None | None | False | None | False | 7346.26 | 0 | | 3359388 | 118117 | None | V-2 13.33.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 | | 3359389 | 118117 | None | V-2 13.33.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 256.06 | 256.06 | 20.0 | False | None | None | False | None | False | 5121.2 | 0 | | 3359390 | 118117 | None | V-2 13.33.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 562.86 | 562.86 | 50.0 | False | None | None | False | None | False | 28143.0 | 0 | | 3359391 | 118117 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 364.62 | 364.62 | 10.0 | False | None | None | False | None | False | 3646.2 | 0 | | 3359392 | 118117 | None | V-2 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 368.27 | 368.27 | 15.0 | False | None | None | False | None | False | 5524.05 | 0 | | 3359393 | 118117 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia Pipes - GF ---- etc., complete with all lead | Mtr | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 | | 3359394 | 118117 | None | V-2 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 451.69 | 451.69 | 50.0 | False | None | None | False | None | False | 22584.5 | 0 | | 3359395 | 118117 | None | V-2 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes - FF ---- etc., complete with all lead | Mtr | 568.49 | 568.49 | 20.0 | False | None | None | False | None | False | 11369.8 | 0 | | 3359396 | 118117 | None | V-2 13.4.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - GF ---- etc., complete with all lead | Each | 337.48 | 337.48 | 3.0 | False | None | None | False | None | False | 1012.44 | 0 | | 3359397 | 118117 | None | V-2 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore - FF ---- etc., complete with all lead | Each | 340.85 | 340.85 | 2.0 | False | None | None | False | None | False | 681.7 | 0 | | 3359398 | 118117 | None | V-2 739 | Providing and fixing 20mm thick grey granite,.For Urinals partition - GF ---- etc., complete with all lead | Sqm | 1121.0 | 1121.0 | 5.0 | False | None | None | False | None | False | 5605.0 | 0 | | 3359399 | 118117 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - GF ---- etc., complete with all lead | Each | 287.92 | 287.92 | 10.0 | False | None | None | False | None | False | 2879.2 | 0 | | 3359400 | 118117 | None | V-2 13.36 | Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete - FF ---- etc., complete with all lead | Each | 296.56 | 296.56 | 10.0 | False | None | None | False | None | False | 2965.6 | 0 | | 3359401 | 118117 | None | Data Rate-07 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 7.50 cms thick ---- etc., complete with all lead | Nos | 154.58 | 154.58 | 6.0 | False | None | None | False | None | False | 927.48 | 0 | | 3359402 | 118117 | None | Data Rate-08 | Drilling holes of 2.50 cms dia (roof/chajja/stone). -do- in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 185.26 | 185.26 | 6.0 | False | None | None | False | None | False | 1111.56 | 0 | | 3359403 | 118117 | None | Data Rate-09 | Air Vent Cowel 75mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 413.0 | 413.0 | 10.0 | False | None | None | False | None | False | 4130.0 | 0 | | 3359404 | 118117 | None | Data Rate-10 | Air Vent Cowel 110mm dia .complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 590.0 | 590.0 | 10.0 | False | None | None | False | None | False | 5900.0 | 0 | | 3359405 | 118117 | None | Data Rate-11 | Supplying and fixing Counter basin consisting of s GF Toilet & FF Toilet. complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 5664.0 | 5664.0 | 5.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3359406 | 118117 | None | Data Rate-12 | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 | | 3359407 | 118117 | None | Data Rate-13 | Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confiMing to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. - GF Toilet & FF Toilet ---- etc., complete with all lead | Nos | 1996.56 | 1996.56 | 2.0 | False | None | None | False | None | False | 3993.12 | 0 | | 3359408 | 118117 | None | Data Rate-14 | Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick confoMed to IS 1239 etc., complete as directed by the engineer Incharge. ---- etc., complete with all lead | Nos | 767.0 | 767.0 | 10.0 | False | None | None | False | None | False | 7670.0 | 0 | | 3359409 | 118117 | None | Data Rate-15 | Supplying, installing, testing and commissioning approved make Submersible Pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller with cabling between hePumps, control panel, UGR & OHT etc.,. complete.approx. Length of cable = 80. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,.complete as per direction of engineer incharge. ---- etc., complete with all lead | Nos | 3540.0 | 3540.0 | 2.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3359410 | 118117 | None | V-5 10.2.4 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead | Mtr | 679.68 | 679.68 | 50.0 | False | None | None | False | None | False | 33984.0 | 0 | | 3359411 | 118117 | None | V-5 10.2.5 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing)for:( For external Sanitary Work ). Pipes of SN4, 200mm dia. ---- etc., complete with all lead | Mtr | 980.58 | 980.58 | 10.0 | False | None | None | False | None | False | 9805.8 | 0 | | 3359412 | 118117 | None | V-5 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.(INSPECTION CHAMBER) ---- etc., complete with all lead | Nos | 6435.72 | 6435.72 | 5.0 | False | None | None | False | None | False | 32178.6 | 0 | | 3359413 | 118117 | None | V-2 13.58 | Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).10cms x 10cms ---- etc., complete with all lead | Nos | 408.28 | 408.28 | 4.0 | False | None | None | False | None | False | 1633.12 | 0 | | 3359414 | 118117 | None | V-2 13.23.5 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead | Nos | 1585.92 | 1585.92 | 1.0 | False | None | None | False | None | False | 1585.92 | 0 | | 3359415 | 118117 | None | V-2 6.3 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- etc., complete with all lead | Cum | 10471.32 | 10471.32 | 5.3 | False | None | None | False | None | False | 55497.996 | 0 | | 3359416 | 118117 | None | V-2 2.3.1 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid Seperately) ---- etc., complete with all lead | Cum | 8207.25 | 8207.25 | 11.75 | False | None | None | False | None | False | 96435.1875 | 0 | | 3359417 | 118117 | None | 15.24 2018-19 | KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead | Sqm | 5.9 | 5.9 | 16.6 | False | None | None | False | None | False | 97.94 | 0 | | 3359418 | 118117 | None | Data Rate-16 | Providing and fixing M.S.steel cover for tank opening including materials, labour etc., complete. ---- etc., complete with all lead | Nos | 1770.0 | 1770.0 | 4.0 | False | None | None | False | None | False | 7080.0 | 0 | | 3359419 | 118117 | None | V-2 137 | Providing and Filling of Brick bats 25 to 100 mm Soak Pit etc. complete as per directions of the Engineer-in charge ---- etc., complete with all lead | Cum | 944.0 | 944.0 | 3.5 | False | None | None | False | None | False | 3304.0 | 0 | | 3359420 | 118117 | None | V-2 19.3 | Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 2862.68 | 2862.68 | 13.5 | False | None | None | False | None | False | 38646.18 | 0 | | 3359421 | 118117 | None | V-2 19.7.1 | Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 568.76 | 568.76 | 47.27 | False | None | None | False | None | False | 26885.2852 | 0 | | 3359422 | 118117 | None | V-2 19.12.1 | Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge ---- etc., complete with all lead | Sqm | 283.2 | 283.2 | 26.64 | False | None | None | False | None | False | 7544.448 | 0 | | 3359423 | 118117 | None | V-2 19.51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Unit | 647.82 | 647.82 | 5.0 | False | None | None | False | None | False | 3239.1 | 0 |
| | 1719380947000 | 0 | None | None | Buildings | CONSTRUCTION OF HEALTH & WELLNESS CENTRE AT DUDHIHALLI - ELECTRICAL WORK (SLICE-10) | 446049.72 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3359424 | 118118 | None | 2.2.1, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point upto 3 Mtr from tapping point to out let via switch ---- etc., complete with all lead | Each | 317.42 | 317.42 | 25.0 | False | None | None | False | None | False | 7935.5 | 0 | | 3359425 | 118118 | None | 2.2.2, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3 Mtr upto 6Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 447.22 | 447.22 | 20.0 | False | None | None | False | None | False | 8944.4 | 0 | | 3359426 | 118118 | None | 2.2.3, V-6 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.c) Long point above 6mtr upto 10Mtr from tapping point to out let via switch. ---- etc., complete with all lead | Each | 654.9 | 654.9 | 15.0 | False | None | None | False | None | False | 9823.5 | 0 | | 3359427 | 118118 | None | 3.4.2, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 3 Way
---- etc., complete with all lead | Each | 187.62 | 187.62 | 21.0 | False | None | None | False | None | False | 3940.02 | 0 | | 3359428 | 118118 | None | 3.4.3, V-2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall- 4-5Way
---- etc., complete with all lead | Each | 208.86 | 208.86 | 6.0 | False | None | None | False | None | False | 1253.16 | 0 | | 3359429 | 118118 | None | 3.4.4, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6Way
---- etc., complete with all lead | Each | 259.6 | 259.6 | 2.0 | False | None | None | False | None | False | 519.2 | 0 | | 3359430 | 118118 | None | 3.4.5, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way ---- etc., complete with all lead | Each | 307.98 | 307.98 | 13.0 | False | None | None | False | None | False | 4003.74 | 0 | | 3359431 | 118118 | None | 3.4.6, V-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-10-12 Way ---- etc., complete with all lead | Each | 376.42 | 376.42 | 4.0 | False | None | None | False | None | False | 1505.68 | 0 | | 3359432 | 118118 | None | 3.5.2, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-3 Module
---- etc., complete with all lead | Each | 189.98 | 189.98 | 21.0 | False | None | None | False | None | False | 3989.58 | 0 | | 3359433 | 118118 | None | 3.5.3, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4-5 Module ---- etc., complete with all lead | Each | 206.5 | 206.5 | 6.0 | False | None | None | False | None | False | 1239.0 | 0 | | 3359434 | 118118 | None | 3.5.4, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 6 Module ---- etc., complete with all lead | Each | 276.12 | 276.12 | 2.0 | False | None | None | False | None | False | 552.24 | 0 | | 3359435 | 118118 | None | 3.5.5, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-8 Module ---- etc., complete with all lead | Each | 335.12 | 335.12 | 13.0 | False | None | None | False | None | False | 4356.56 | 0 | | 3359436 | 118118 | None | 3.5.6, V-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-10-12 Module ---- etc., complete with all lead | Each | 405.92 | 405.92 | 4.0 | False | None | None | False | None | False | 1623.68 | 0 | | 3359437 | 118118 | None | 3.6.1, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps one way. ---- etc., complete with all lead | Each | 120.36 | 120.36 | 100.0 | False | None | None | False | None | False | 12036.0 | 0 | | 3359438 | 118118 | None | 3.6.2, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Two way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 6.0 | False | None | None | False | None | False | 1175.28 | 0 | | 3359439 | 118118 | None | 3.6.3, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6Amps 3way socket. ---- etc., complete with all lead | Each | 201.78 | 201.78 | 37.0 | False | None | None | False | None | False | 7465.86 | 0 | | 3359440 | 118118 | None | 3.6.9, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-6Amps Bell push ---- etc., complete with all lead | Each | 208.86 | 208.86 | 2.0 | False | None | None | False | None | False | 417.72 | 0 | | 3359441 | 118118 | None | 3.6.4, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- Stepped Fan Regulator. ---- etc., complete with all lead | Each | 421.26 | 421.26 | 12.0 | False | None | None | False | None | False | 5055.12 | 0 | | 3359442 | 118118 | None | 3.6.10, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead | Each | 384.68 | 384.68 | 11.0 | False | None | None | False | None | False | 4231.48 | 0 | | 3359443 | 118118 | None | 3.6.11, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.- 6/16Amps universal socket ---- etc., complete with all lead | Each | 278.48 | 278.48 | 11.0 | False | None | None | False | None | False | 3063.28 | 0 | | 3359444 | 118118 | None | 3.6.12, V-6 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.-TV/Telephone socket ---- etc., complete with all lead | Each | 184.08 | 184.08 | 3.0 | False | None | None | False | None | False | 552.24 | 0 | | 3359445 | 118118 | None | 12.2.1, V-6 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.-Ding Dong Bell ---- etc., complete with all lead | Each | 290.28 | 290.28 | 2.0 | False | None | None | False | None | False | 580.56 | 0 | | 3359446 | 118118 | None | 1.13, V-6 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | Nos | 192.34 | 192.34 | 12.0 | False | None | None | False | None | False | 2308.08 | 0 | | 3359447 | 118118 | None | 1.2.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 320.0 | False | None | None | False | None | False | 24921.6 | 0 | | 3359448 | 118118 | None | 1.2.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary-25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 300.0 | False | None | None | False | None | False | 27612.0 | 0 | | 3359449 | 118118 | None | 1.3.1, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-19/20mm dia 2mm thick
---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 110.0 | False | None | None | False | None | False | 8826.4 | 0 | | 3359450 | 118118 | None | 1.3.2, V-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.-25mm dia 2mm thick
---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 95.0 | False | None | None | False | None | False | 8855.9 | 0 | | 3359451 | 118118 | None | 2.3.2, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-1.5 sqmm ---- etc., complete with all lead | Mtr | 30.68 | 30.68 | 125.0 | False | None | None | False | None | False | 3835.0 | 0 | | 3359452 | 118118 | None | 2.3.3, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-2.5 sqmm ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 450.0 | False | None | None | False | None | False | 22302.0 | 0 | | 3359453 | 118118 | None | 2.3.4, V-6 | Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multis and copper conductor single core cable in open or consealed system of wiring.-4 sqmm ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 380.0 | False | None | None | False | None | False | 28249.2 | 0 | | 3359454 | 118118 | None | 5.19.9, V-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure- II- Double Door-12 Way SP & N
---- etc., complete with all lead | Each | 2748.22 | 2748.22 | 2.0 | False | None | None | False | None | False | 5496.44 | 0 | | 3359455 | 118118 | None | 5.18.1, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 etc.-6-32Amps SP
---- etc., complete with all lead | Each | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 | | 3359456 | 118118 | None | 5.20.1, V-6 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board-16-25 Amps 2 pole ---- etc., complete with all lead | Each | 5046.86 | 5046.86 | 2.0 | False | None | None | False | None | False | 10093.72 | 0 | | 3359457 | 118118 | None | 32.03, BSR-32 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 4 core 10 sqmm ---- etc., complete with all lead | Km | 175362.16 | 175362.16 | 0.1 | False | None | None | False | None | False | 17536.216 | 0 | | 3359458 | 118118 | None | 31.05, BSR -31 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-2.5 sqmm to 25 sqmm ---- etc., complete with all lead | Km | 19067.62 | 19067.62 | 0.1 | False | None | None | False | None | False | 1906.762 | 0 | | 3359459 | 118118 | None | 6.6.2, Ele SR-2019-20 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.-In soil (hard)
---- etc., complete with all lead | Mtr | 120.36 | 120.36 | 20.0 | False | None | None | False | None | False | 2407.2 | 0 | | 3359460 | 118118 | None | 6.9.1- V-6 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.-40mm
---- etc., complete with all lead | Mtr | 395.3 | 395.3 | 5.0 | False | None | None | False | None | False | 1976.5 | 0 | | 3359461 | 118118 | None | 12.56, V-6 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.
---- etc., complete with all lead | Nos | 4141.8 | 4141.8 | 2.0 | False | None | None | False | None | False | 8283.6 | 0 | | 3359462 | 118118 | None | 12.58.1, V-6 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
---- etc., complete with all lead | Mtr | 96.76 | 96.76 | 45.0 | False | None | None | False | None | False | 4354.2 | 0 | | 3359463 | 118118 | None | 11.3.1, V-6 | Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition- LED light fighting 1 x4- 20/22 w ---- etc., complete with all lead | Each | 814.2 | 814.2 | 20.0 | False | None | None | False | None | False | 16284.0 | 0 | | 3359464 | 118118 | None | 11.5.2, V-6 | Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED square or round down light 10-12W
---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 2.0 | False | None | None | False | None | False | 2088.6 | 0 | | 3359465 | 118118 | None | 11.11.3, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.-7 W, 6500K ---- etc., complete with all lead | Each | 175.82 | 175.82 | 5.0 | False | None | None | False | None | False | 879.1 | 0 | | 3359466 | 118118 | None | 11.11.7, V-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
---- etc., complete with all lead | Each | 502.68 | 502.68 | 12.0 | False | None | None | False | None | False | 6032.16 | 0 | | 3359467 | 118118 | None | 11.8.2, V-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001-2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 40watts
---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 2.0 | False | None | None | False | None | False | 9496.64 | 0 | | 3359468 | 118118 | None | 12.27, V-6 | Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead | Nos | 61.36 | 61.36 | 2.0 | False | None | None | False | None | False | 122.72 | 0 | | 3359469 | 118118 | None | 6.1, V-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 5.0 | False | None | None | False | None | False | 8802.8 | 0 | | 3359470 | 118118 | None | 6.3.1, V-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.-48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 | | 3359471 | 118118 | None | 12.46, V-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin. ---- etc., complete with all lead | Each | 74.34 | 74.34 | 19.0 | False | None | None | False | None | False | 1412.46 | 0 | | 3359472 | 118118 | None | 13.7.1, V-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 143.96 | 143.96 | 28.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3359473 | 118118 | None | 13.11, V-6 | Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.
---- etc., complete with all lead | Each | 371.7 | 371.7 | 12.0 | False | None | None | False | None | False | 4460.4 | 0 | | 3359474 | 118118 | None | 13.13, V-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 834.26 | 834.26 | 5.0 | False | None | None | False | None | False | 4171.3 | 0 | | 3359475 | 118118 | None | 13.4.1, V-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.-Single bracket 1.5 Mtr. Length
---- etc., complete with all lead | Each | 1723.98 | 1723.98 | 2.0 | False | None | None | False | None | False | 3447.96 | 0 | | 3359476 | 118118 | None | 13.5, V-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc., complete with all lead | Each | 191.16 | 191.16 | 2.0 | False | None | None | False | None | False | 382.32 | 0 | | 3359477 | 118118 | None | 5.42.2, V-6 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete-16SWG ---- etc., complete with all lead | Sq CM | 0.51 | 0.51 | 40000.0 | False | None | None | False | None | False | 20400.0 | 0 | | 3359478 | 118118 | None | 5.40.1, V-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.-100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 | | 3359479 | 118118 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -40x40x6mm ---- etc., complete with all lead | Mtr | 359.9 | 359.9 | 3.0 | False | None | None | False | None | False | 1079.7 | 0 | | 3359480 | 118118 | None | 5.41.1, V-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint -50x100x50x6mm C channel ---- etc., complete with all lead | Mtr | 892.08 | 892.08 | 3.0 | False | None | None | False | None | False | 2676.24 | 0 | | 3359481 | 118118 | None | 5.15.9, V-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR POLE-100Amps 25kA ---- etc., complete with all lead | Each | 10014.66 | 10014.66 | 1.0 | False | None | None | False | None | False | 10014.66 | 0 | | 3359482 | 118118 | None | 5.18.4, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898- 6-32Amps DP ---- etc., complete with all lead | Each | 872.02 | 872.02 | 3.0 | False | None | None | False | None | False | 2616.06 | 0 | | 3359483 | 118118 | None | 5.18.9, V-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898-50-63Amps TPN ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 1.0 | False | None | None | False | None | False | 3643.84 | 0 | | 3359484 | 118118 | None | 5.7.2, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-32Amps
---- etc., complete with all lead | Each | 185.26 | 185.26 | 3.0 | False | None | None | False | None | False | 555.78 | 0 | | 3359485 | 118118 | None | 5.7.3, V-6 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-63Amps
---- etc., complete with all lead | Each | 473.18 | 473.18 | 1.0 | False | None | None | False | None | False | 473.18 | 0 | | 3359486 | 118118 | None | 5.12.1, V-6 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution)-63Amps ---- etc., complete with all lead | Each | 8119.58 | 8119.58 | 1.0 | False | None | None | False | None | False | 8119.58 | 0 | | 3359487 | 118118 | None | 5.27, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Ammeter
---- etc., complete with all lead | Each | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 | | 3359488 | 118118 | None | 5.28, V-6 | Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
---- etc., complete with all lead | Each | 188.8 | 188.8 | 1.0 | False | None | None | False | None | False | 188.8 | 0 | | 3359489 | 118118 | None | 5.29, V-6 | Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
---- etc., complete with all lead | Each | 1681.5 | 1681.5 | 2.0 | False | None | None | False | None | False | 3363.0 | 0 | | 3359490 | 118118 | None | 5.38, V-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC50 Hz 12/24v D.C
---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 | | 3359491 | 118118 | None | 5.34, V-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound
---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 | | 3359492 | 118118 | None | 5.30, V-6 | Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
---- etc., complete with all lead | Each | 1628.4 | 1628.4 | 2.0 | False | None | None | False | None | False | 3256.8 | 0 |
|
|
|---|