| 3361043 | 118226 | None | code01 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. & with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 7978.0 | 7978.0 | 6.04 | False | None | None | False | None | False | 48187.12 | 0 |
| 3361044 | 118226 | None | code02 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete andside clamps ), but including cost of materials, labour, usage charges complete as per specifications. & with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 124202.0 | 124202.0 | 0.25 | False | None | None | False | None | False | 31050.5 | 0 |
| 3361045 | 118226 | None | code03 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding & with all lead & lifts and as per direction of the Engineer in charge of work. | Kg | 168.0 | 168.0 | 231.53 | False | None | None | False | None | False | 38897.04 | 0 |
| 3361046 | 118226 | None | code04 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 7444.0 | 7444.0 | 5.25 | False | None | None | False | None | False | 39081.0 | 0 |
| 3361047 | 118226 | None | code05 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, aneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and aking provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. & with all lead & lifts and as per direction of the Engineer in charge of work. | Kg | 582.0 | 582.0 | 51.44 | False | None | None | False | None | False | 29938.08 | 0 |
| 3361048 | 118226 | None | code06 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 1171.0 | 1171.0 | 6.08 | False | None | None | False | None | False | 7119.68 | 0 |
| 3361049 | 118226 | None | code07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarseaggregates & with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 6630.0 | 6630.0 | 17.82 | False | None | None | False | None | False | 118146.6 | 0 |
| 3361050 | 118226 | None | code08 | Centering charges for lintel & beam& with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 3978.0 | 3978.0 | 4.87 | False | None | None | False | None | False | 19372.86 | 0 |
| 3361051 | 118226 | None | code09 | Centering charges for Roof& with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 3315.0 | 3315.0 | 4.82 | False | None | None | False | None | False | 15978.3 | 0 |
| 3361052 | 118226 | None | code10 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings & with all lead & lifts and as per direction of the Engineer in charge of work. | t | 89457.0 | 89457.0 | 1.46 | False | None | None | False | None | False | 130607.22 | 0 |
| 3361053 | 118226 | None | code11 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates & with all lead & lifts and as per direction of the Engineer in charge of work. | Cum | 6217.0 | 6217.0 | 5.77 | False | None | None | False | None | False | 35872.09 | 0 |
| 3361054 | 118226 | None | code12 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge& with all lead & lifts and as per direction of the Engineer in charge of work. | Kg | 565.0 | 565.0 | 60.0 | False | None | None | False | None | False | 33900.0 | 0 |
| 3361055 | 118226 | None | code13 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 366.0 | 366.0 | 158.09 | False | None | None | False | None | False | 57860.94 | 0 |
| 3361056 | 118226 | None | code14 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 323.0 | 323.0 | 73.48 | False | None | None | False | None | False | 23734.04 | 0 |
| 3361057 | 118226 | None | code15 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 371.0 | 371.0 | 277.89 | False | None | None | False | None | False | 103097.19 | 0 |
| 3361058 | 118226 | None | code16 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 354.0 | 354.0 | 82.32 | False | None | None | False | None | False | 29141.28 | 0 |
| 3361059 | 118226 | None | code17 | Providing RCC rings& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 650.0 | 650.0 | 4.0 | False | None | None | False | None | False | 2600.0 | 0 |
| 3361060 | 118226 | None | code18 | Providing granite slabs of selected quality roughly dressed and fixed
in cement mortar (1:6) including fixing curing etc., complete.0 cms thick & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 912.0 | 912.0 | 2.25 | False | None | None | False | None | False | 2052.0 | 0 |
| 3361061 | 118226 | None | code19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 1145.0 | 1145.0 | 55.1 | False | None | None | False | None | False | 63089.5 | 0 |
| 3361062 | 118226 | None | code20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 889.0 | 889.0 | 6.2 | False | None | None | False | None | False | 5511.8 | 0 |
| 3361063 | 118226 | None | code21 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 1392.0 | 1392.0 | 27.75 | False | None | None | False | None | False | 38628.0 | 0 |
| 3361064 | 118226 | None | code22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 53.0 | 53.0 | 231.57 | False | None | None | False | None | False | 12273.21 | 0 |
| 3361065 | 118226 | None | code23 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 89.0 | 89.0 | 82.32 | False | None | None | False | None | False | 7326.48 | 0 |
| 3361066 | 118226 | None | code24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. & with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 167.0 | 167.0 | 15.68 | False | None | None | False | None | False | 2618.56 | 0 |
| 3361067 | 118226 | None | code25 | Providing and laying platform using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing.& with all lead & lifts and as per direction of the Engineer in charge of work. | Sqm | 3525.0 | 3525.0 | 2.79 | False | None | None | False | None | False | 9834.75 | 0 |
| 3361068 | 118226 | None | code26 | Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior apex paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer-in-charge of the work. | Sqm | 439.0 | 439.0 | 69.82 | False | None | None | False | None | False | 30650.98 | 0 |
| 3361069 | 118226 | None | code27 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer s & with all lead & lifts and as per direction of the Engineer in charge of work. | No | 2866.0 | 2866.0 | 1.0 | False | None | None | False | None | False | 2866.0 | 0 |
| 3361070 | 118226 | None | code28 | Providing wall black boards in CM 1:3 with two coats of black paint including finishing etc., complete [P.No.267 Item No.37.30] PWD SR of 2018-19 | No | 781.0 | 781.0 | 1.0 | False | None | None | False | None | False | 781.0 | 0 |
| 3361071 | 118226 | None | code29 | Providing and fixing 60 cm x 60 cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50 x 50 x 6 mm and M.S. shutter of 31.5 mrn or B.G.10 thick with hinges on top and locking arrangement, painting et+B255c., complete(for R.C.C. overhead tanks andGLSR & with all lead & lifts and as per direction of the Engineer in charge of work. | No | 1871.0 | 1871.0 | 1.0 | False | None | None | False | None | False | 1871.0 | 0 |
| 3361072 | 118226 | None | code30 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests [P.No. 123 Item No.14.1.1] PWD Vol -2 SR of 2021-22 | No | 4884.0 | 4884.0 | 1.0 | False | None | None | False | None | False | 4884.0 | 0 |
| 3361073 | 118226 | None | code31 | Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work)25mm nominal OD pipes. & with all lead & lifts and as per direction of the Engineer in charge of work. | Mtr | 296.0 | 296.0 | 50.0 | False | None | None | False | None | False | 14800.0 | 0 |
| 3361074 | 118226 | None | code32 | Supplying and Fixing Monoblock Type-MB Series Pump Set& with all lead & lifts and as per direction of the Engineer in charge of work. | Nos | 6925.0 | 6925.0 | 1.0 | False | None | None | False | None | False | 6925.0 | 0 |
| 3361075 | 118226 | None | code33 | Providing and placing on terrace (at all floor levels ) polyethylene water storage tank IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and thebase support for tank & with all lead & lifts and as per direction of the Engineer in charge of work. | Ltr | 9.0 | 9.0 | 500.0 | False | None | None | False | None | False | 4500.0 | 0 |
| 3361076 | 118226 | None | code34 | KSRB 8.6-7 : Providing and fixing on wall face un plasticised rigid PVC rain water pipes confirming to IS :13592Type A including joiting with seal ring confirming to IS :5382, leaving 10mm gap thermal expansion [i] single socketed pipes 100mm diameter & with all lead & lifts and as per direction of the Engineer in charge of work. | Mtr | 291.0 | 291.0 | 8.0 | False | None | None | False | None | False | 2328.0 | 0 |
| 3361077 | 118226 | None | code35 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20 mm dia 2 mm thick19/20 mm dia 2 mm thick& with all lead & lifts and as per direction of the Engineer in charge of work. | Mtr | 75.0 | 75.0 | 40.0 | False | None | None | False | None | False | 3000.0 | 0 |
| 3361078 | 118226 | None | code36 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc135 x 75 x 65 mm& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 262.0 | 262.0 | 3.0 | False | None | None | False | None | False | 786.0 | 0 |
| 3361079 | 118226 | None | code37 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc200 x 200 x 65 mm& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 335.0 | 335.0 | 3.0 | False | None | None | False | None | False | 1005.0 | 0 |
| 3361080 | 118226 | None | code38 | Supplying and fixing PVC/metal conduit Deep junction box - 32 mm deep Junction box & with all lead & lifts and as per direction of the Engineer in charge of work. | No | 69.0 | 69.0 | 3.0 | False | None | None | False | None | False | 207.0 | 0 |
| 3361081 | 118226 | None | code39 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 276.0 | 276.0 | 20.0 | False | None | None | False | None | False | 5520.0 | 0 |
| 3361082 | 118226 | None | code40 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let
via switch& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 386.0 | 386.0 | 15.0 | False | None | None | False | None | False | 5790.0 | 0 |
| 3361083 | 118226 | None | code41 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via
switch& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 567.0 | 567.0 | 18.0 | False | None | None | False | None | False | 10206.0 | 0 |
| 3361084 | 118226 | None | code42 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model& with all lead & lifts and as per direction of the Engineer in charge of work. | No | 2090.0 | 2090.0 | 4.0 | False | None | None | False | None | False | 8360.0 | 0 |