createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719380393935 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4870.00 emd 292000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-07-2024 16:00:00 tenderQueryClose 02-07-2024 16:00:00 technicalBidOpen 11-07-2024 16:30:00 publishedDate 26-06-2024 12:50:36 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 03-07-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Assistant Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843375 tenderSupplierList None
tenderSchedule	createdTs 1719380393981 version 10 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT453 title Construction of Health and Wellness Centres at 1)Hitlamakki in Kumta Taluk, 2)Kanamaski in Sirsi Taluk and 3)Kolikere in Yallapur Taluk of Uttara Kannada District. description Construction of Health and Wellness Centres at 1)Hitlamakki in Kumta Taluk, 2)Kanamaski in Sirsi Taluk and 3)Kolikere in Yallapur Taluk of Uttara Kannada District. category WORKS categoryText Works ecv 19451590.34 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 19500000.0 groupOverheadTotal 0.0 fileNumber HFWE/AEE/HVR/HWC/15F/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719380394000 0 None None Buildings Civil works Hitlamakki Slice-1 3847835.71 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357469 118093 None V-1 Page No 8 Item No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 125.55 125.55 29.03 False None None False None False 3644.7165 0 3357470 118093 None V-1 Page No 8 Item No 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead Cum 134.8 134.8 292.71 False None None False None False 39457.308 0 3357471 118093 None V-1 Page No 8 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- etc., complete with all lead Cum 479.74 479.74 14.56 False None None False None False 6985.0144 0 3357472 118093 None V-3 Page No 5 Item No 1.1a Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete with all lead Cum 178.42 178.42 34.6 False None None False None False 6173.332 0 3357473 118093 None V-1 Page No 7 Item No 1.18 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 626.44 626.44 142.53 False None None False None False 89286.4932 0 3357474 118093 None V-1 Page No 15 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7915.06 7915.06 24.42 False None None False None False 193285.7652 0 3357475 118093 None V-1 Page No 15 Item No 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8558.17 8558.17 35.37 False None None False None False 302702.4729 0 3357476 118093 None V-1 Page No 15 Item No 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8558.17 8558.17 1.75 False None None False None False 14976.7975 0 3357477 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS ---- etc., complete with all lead Cum 14895.75 14895.75 6.35 False None None False None False 94588.0125 0 3357478 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM ---- etc., complete with all lead Cum 13143.31 13143.31 16.25 False None None False None False 213578.7875 0 3357479 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS ---- etc., complete with all lead Cum 14019.53 14019.53 8.24 False None None False None False 115520.9272 0 3357480 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB ---- etc., complete with all lead Cum 13143.31 13143.31 11.04 False None None False None False 145102.1424 0 3357481 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC STAIRCASE ---- etc., complete with all lead Cum 13143.31 13143.31 2.77 False None None False None False 36406.9687 0 3357482 118093 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTELS ---- etc., complete with all lead Cum 14019.53 14019.53 2.59 False None None False None False 36310.5827 0 3357483 118093 None V- 1 Page No 15 Item No 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8216.38 8216.38 1.59 False None None False None False 13064.0442 0 3357484 118093 None V- 1 Page No 15 Item No 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11913.76 11913.76 0.43 False None None False None False 5122.9168 0 3357485 118093 None V1 Page No 18 Item No 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- etc., complete with all lead Tonne 118226.37 118226.37 7.29 False None None False None False 861870.2373 0 3357486 118093 None Data Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead Rmtr 86.14 86.14 27.45 False None None False None False 2364.543 0 3357487 118093 None V-2 Page No 9 Item No 5.4 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. ---- etc., complete with all lead Cum 8423.88 8423.88 8.04 False None None False None False 67727.9952 0 3357488 118093 None V-2 Page No 17 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1731.3 1731.3 164.89 False None None False None False 285474.057 0 3357489 118093 None V-2 Page No 17 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1459.05 1459.05 35.01 False None None False None False 51081.3405 0 3357490 118093 None V-2 Page No 100 Item No 12.13.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) ---- etc., complete with all lead m 1009.7 1009.7 42.4 False None None False None False 42811.28 0 3357491 118093 None V-2 Page No 105 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1342.75 1342.75 6.0 False None None False None False 8056.5 0 3357492 118093 None V-2 Page No 107 Item No 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead Nos 1390.32 1390.32 6.0 False None None False None False 8341.92 0 3357493 118093 None V-2 Page No 107 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1308.38 1308.38 6.0 False None None False None False 7850.28 0 3357494 118093 None V-2 Page No 107 Item No 12.63 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 313.22 313.22 12.0 False None None False None False 3758.64 0 3357495 118093 None V-2 Page No 107 Item No 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- etc., complete with all lead Nos 171.81 171.81 12.0 False None None False None False 2061.72 0 3357496 118093 None V-2 Page No 107 Item No 12.75.1 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- etc., complete with all lead Nos 72.69 72.69 6.0 False None None False None False 436.14 0 3357497 118093 None V-2 Page No 108 Item No 12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- etc., complete with all lead Nos 363.44 363.44 12.0 False None None False None False 4361.28 0 3357498 118093 None V-2 Page No 69 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 79.3 79.3 36.0 False None None False None False 2854.8 0 3357499 118093 None V-1 Page No 205 Item No 20.80 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Rmtr 55.51 55.51 35.4 False None None False None False 1965.054 0 3357500 118093 None V-2 Page No 106 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak ---- etc., complete with all lead Sqm 5989.49 5989.49 14.88 False None None False None False 89123.6112 0 3357501 118093 None V-2 Page No 110 Item No 11.35.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. ---- etc., complete with all lead Sqm 754.64 754.64 62.1 False None None False None False 46863.144 0 3357502 118093 None V-2 Page No 110 Item No 11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- etc., complete with all lead Sqm 1305.74 1305.74 12.42 False None None False None False 16217.2908 0 3357503 118093 None V-2 Page No 110 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 222.03 222.03 260.82 False None None False None False 57909.8646 0 3357504 118093 None V-2 Page No 112 Item No 12.96 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. ---- etc., complete with all lead m 849.79 849.79 19.8 False None None False None False 16825.842 0 3357505 118093 None V-2 Page No 112 Item No 12.99.1 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames ---- etc., complete with all lead Sqm 4234.41 4234.41 6.3 False None None False None False 26676.783 0 3357506 118093 None V-2 Page No 112 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 278.86 278.86 104.03 False None None False None False 29009.8058 0 3357507 118093 None V-2 Page No 42 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) ---- etc., complete with all lead Sqm 461.24 461.24 337.83 False None None False None False 155820.7092 0 3357508 118093 None V-2 Page No 50 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 132.16 132.16 441.91 False None None False None False 58402.8256 0 3357509 118093 None V-2 Page No 42 Item No 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Outside) ---- etc., complete with all lead Sqm 508.82 508.82 196.14 False None None False None False 99799.9548 0 3357510 118093 None V-2 Page No 41 Item No 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 389.87 389.87 36.98 False None None False None False 14417.3926 0 3357511 118093 None V-2 Page No 42 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 461.24 461.24 16.63 False None None False None False 7670.4212 0 3357512 118093 None V2 Page No 43 Item No 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment 8.16.1 Plaster mesh 150mm wide ---- etc., complete with all lead Rmtr 44.83 44.83 535.2 False None None False None False 23993.016 0 3357513 118093 None V-2 Page No 134 Item No 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead Sqm 812.78 812.78 12.24 False None None False None False 9948.4272 0 3357514 118093 None V-2 Page No 54 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead Rmtr 68.72 68.72 238.64 False None None False None False 16399.3408 0 3357515 118093 None V-2 Page No 62 Item No 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. ---- etc., complete with all lead Sqm 1552.88 1552.88 89.09 False None None False None False 138346.0792 0 3357516 118093 None V-2 Page No 63 Item No 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 3259.07 3259.07 31.52 False None None False None False 102725.8864 0 3357517 118093 None V-2 Page No 60 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete with all lead Sqm 1174.9 1174.9 5.86 False None None False None False 6884.914 0 3357518 118093 None V-2 Page No 65 Item No 9.9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1914.95 1914.95 36.98 False None None False None False 70814.851 0 3357519 118093 None V-2 Page No 61 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 466.52 466.52 42.84 False None None False None False 19985.7168 0 3357520 118093 None V-2 Page No 82 Item No 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 179.74 179.74 259.2 False None None False None False 46588.608 0 3357521 118093 None V2 Page No 48 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 167.84 167.84 441.91 False None None False None False 74170.1744 0 3357522 118093 None V-2 Page No 45 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 206.17 206.17 196.14 False None None False None False 40438.1838 0 3357523 118093 None V-2 Page No 47 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 66.08 66.08 12.42 False None None False None False 820.7136 0 3357524 118093 None V-2 Page No 48 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.98 151.98 12.42 False None None False None False 1887.5916 0 3357525 118093 None V-2 Page No 47 Item No 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 70.04 70.04 35.71 False None None False None False 2501.1284 0 3357526 118093 None V-2 Page No 49 Item No 8.47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 178.42 178.42 35.71 False None None False None False 6371.3782 0 1719380394000 0 None None Buildings Civil works Hitlamakki FF Slice-2 1711487.39 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357527 118094 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS ---- etc., complete with all lead Cum 15044.71 15044.71 3.53 False None None False None False 53107.8263 0 3357528 118094 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB ---- etc., complete with all lead Cum 14159.72 14159.72 5.83 False None None False None False 82551.1676 0 3357529 118094 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates S1 ---- etc., complete with all lead Cum 13274.74 13274.74 8.55 False None None False None False 113499.027 0 3357530 118094 None V-1 Page No 17 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTELS ---- etc., complete with all lead Cum 14159.72 14159.72 1.91 False None None False None False 27045.0652 0 3357531 118094 None V-1 Page No 15 Item No 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8298.55 8298.55 1.21 False None None False None False 10041.2455 0 3357532 118094 None V-1 Page No 15 Item No 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 12032.89 12032.89 0.43 False None None False None False 5174.1427 0 3357533 118094 None V1 Page No 18 Item No 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- etc., complete with all lead Tonne 119408.63 119408.63 1.63 False None None False None False 194636.0669 0 3357534 118094 None Data Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead Rmtr 86.14 86.14 28.4 False None None False None False 2446.376 0 3357535 118094 None V-2 Page No 17 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1748.6 1748.6 166.57 False None None False None False 291264.302 0 3357536 118094 None V-2 Page No 17 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1473.63 1473.63 48.02 False None None False None False 70763.7126 0 3357537 118094 None V-2 Page No 100 Item No 12.93.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) ---- etc., complete with all lead Cum 1019.79 1019.79 26.2 False None None False None False 26718.498 0 3357538 118094 None V-2 Page No 105 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1356.17 1356.17 4.0 False None None False None False 5424.68 0 3357539 118094 None V-2 Page No 107 Item No 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead Nos 1404.22 1404.22 4.0 False None None False None False 5616.88 0 3357540 118094 None V-2 Page No 107 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1321.46 1321.46 4.0 False None None False None False 5285.84 0 3357541 118094 None V-2 Page No 107 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 316.35 316.35 8.0 False None None False None False 2530.8 0 3357542 118094 None V-2 Page No 107 Item No 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- etc., complete with all lead Nos 173.52 173.52 8.0 False None None False None False 1388.16 0 3357543 118094 None V-2 Page No 107 Item No 12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- etc., complete with all lead Nos 73.41 73.41 4.0 False None None False None False 293.64 0 3357544 118094 None V-2 Page No 108 Item No 12.75.1 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- etc., complete with all lead Nos 367.07 367.07 8.0 False None None False None False 2936.56 0 3357545 118094 None V-2 Page No 69 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 80.08 80.08 4.0 False None None False None False 320.32 0 3357546 118094 None V-1 Page No 205 Item No 20.8 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Rmtr 49.55 49.55 23.0 False None None False None False 1139.65 0 3357547 118094 None V-2 Page No 106 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak ---- etc., complete with all lead Sqm 6049.38 6049.38 9.12 False None None False None False 55170.3456 0 3357548 118094 None V-2 Page No 106 Item No 12.57.4 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. ---- etc., complete with all lead Sqm 762.17 762.17 55.35 False None None False None False 42186.1095 0 3357549 118094 None V-2 Page No 110 Item No 11.37.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- etc., complete with all lead Sqm 1318.79 1318.79 11.07 False None None False None False 14599.0053 0 3357550 118094 None V-2 Page No 110 Item No 11.34.A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 224.24 224.24 199.26 False None None False None False 44682.0624 0 3357551 118094 None V-2 Page No 112 Item No 12.96 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. ---- etc., complete with all lead Rmtr 858.28 858.28 9.9 False None None False None False 8496.972 0 3357552 118094 None V-2 Page No 112 Item No 12.99.1 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames ---- etc., complete with all lead Sqm 4276.75 4276.75 3.15 False None None False None False 13471.7625 0 3357553 118094 None V-2 Page No 112 Item No 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 281.64 281.64 118.01 False None None False None False 33236.3364 0 3357554 118094 None V-2 Page No 42Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) ---- etc., complete with all lead Sqm 465.85 465.85 250.13 False None None False None False 116523.0605 0 3357555 118094 None V-2 Page No 50 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 133.48 133.48 368.14 False None None False None False 49139.3272 0 3357556 118094 None V-2 Page No 42 Item No 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Outside) ---- etc., complete with all lead Sqm 513.9 513.9 215.75 False None None False None False 110873.925 0 3357557 118094 None V-2 Page No 41 Item No 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 393.77 393.77 27.87 False None None False None False 10974.3699 0 3357558 118094 None V-2 Page No 43 Item No 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment 8.16.1 Plaster mesh 150mm wide ---- etc., complete with all lead Rmtr 44.83 44.83 399.0 False None None False None False 17887.17 0 3357559 118094 None V-2 Page No 23 Item No 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. ---- etc., complete with all lead Cum 2692.32 2692.32 1.2 False None None False None False 3230.784 0 3357560 118094 None V-2 Page No 134 Item No 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead Sqm 820.91 820.91 8.94 False None None False None False 7338.9354 0 3357561 118094 None V-2 Page No 54 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead Rmtr 69.41 69.41 160.83 False None None False None False 11163.2103 0 3357562 118094 None V-2 Page No 62Item No 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. ---- etc., complete with all lead Sqm 1568.4 1568.4 54.78 False None None False None False 85916.952 0 3357563 118094 None V-2 Page No 60 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- etc., complete with all lead Sqm 1186.65 1186.65 5.98 False None None False None False 7096.167 0 3357564 118094 None V-2 Page No 65 Item No 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1934.14 1934.14 27.87 False None None False None False 53904.4818 0 3357565 118094 None V-2 Page No 61 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 471.19 471.19 33.85 False None None False None False 15949.7815 0 3357566 118094 None V-2 Page No 63 Item No 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 3291.65 3291.65 3.64 False None None False None False 11981.606 0 3357567 118094 None V-2 Page No 48 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 169.52 169.52 250.13 False None None False None False 42402.0376 0 3357568 118094 None V-2 Page No 45 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 208.23 208.23 215.75 False None None False None False 44925.6225 0 3357569 118094 None V-2 Page No 47Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 66.74 66.74 14.4 False None None False None False 961.056 0 3357570 118094 None V-2 Page No 48 Item No 8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 153.5 153.5 11.07 False None None False None False 1699.245 0 3357571 118094 None V-2 Page No 47 Item No 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 70.74 70.74 21.89 False None None False None False 1548.4986 0 3357572 118094 None V-2 Page No 49 Item No 8.47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 180.2 180.2 21.89 False None None False None False 3944.578 0 1719380394000 0 None None Buildings PHE Works Hitlamakki GF Slice -3 157737.63 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357573 118095 None V-2 P No 28 Item No 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.- 40mm dia pipes, From wash basin waste lines - 40mm dia pipes, From wash basin waste lines -GF ---- etc., complete with all lead Each 121.58 121.58 10.0 False None None False None False 1215.8 0 3357574 118095 None V-5 P No 191 Item No 16.7.4 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:- 50mm nominal bore pipes, From Sink & Urinal lines- GF ---- etc., complete with all lead m 183.7 183.7 10.0 False None None False None False 1837.0 0 3357575 118095 None V-5 P No A-44 Item No 657 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines- GF ---- etc., complete with all lead m 162.55 162.55 80.0 False None None False None False 13004.0 0 3357576 118095 None V-5 P No A-44 Item No 647 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines- GF ---- etc., complete with all lead m 337.0 337.0 50.0 False None None False None False 16850.0 0 3357577 118095 None V-2 P No 125 Item No 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 260.35 260.35 20.0 False None None False None False 5207.0 0 3357578 118095 None V-2 P No 125 Item No 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 384.58 384.58 25.0 False None None False None False 9614.5 0 3357579 118095 None V-2 P No 128 Item No 14.31 Sanitary and CP fixtures Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. GF Toilet ---- etc., complete with all lead Nos. 1612.35 1612.35 3.0 False None None False None False 4837.05 0 3357580 118095 None V-2 P No 118 Item No 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter- GF ---- etc., complete with all lead Nos. 368.72 368.72 1.0 False None None False None False 368.72 0 3357581 118095 None V-2 P No 127 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.- GF ---- etc., complete with all lead Nos. 7350.73 7350.73 1.0 False None None False None False 7350.73 0 3357582 118095 None V-2 P No 130 Item No 14.40.2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.- GF ---- etc., complete with all lead Nos. 655.51 655.51 3.0 False None None False None False 1966.53 0 3357583 118095 None V-2 P No 131 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid- GF Toilet ---- etc., complete with all lead Nos. 7899.2 7899.2 1.0 False None None False None False 7899.2 0 3357584 118095 None V-2 P No 178 Item No 20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4687.71 4687.71 1.0 False None None False None False 4687.71 0 3357585 118095 None V-2 P No 124 Item No 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern - GF Toilet ---- etc., complete with all lead Nos. 5886.4 5886.4 1.0 False None None False None False 5886.4 0 3357586 118095 None V-2 P No 126 Item No 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm- GF Toilet ---- etc., complete with all lead Nos. 6716.37 6716.37 1.0 False None None False None False 6716.37 0 3357587 118095 None V-2 P No A-16 5 Item No 166 Providing and fixing C.P. Brass stop cock (concealed) 15 mm GF Toilet ---- etc., complete with all lead Nos. 693.83 693.83 2.0 False None None False None False 1387.66 0 3357588 118095 None V-2 P No 124 Item No 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps - GF Toilet ---- etc., complete with all lead Nos. 4073.17 4073.17 3.0 False None None False None False 12219.51 0 3357589 118095 None V-2 P No 120 Item No 13.32.1 WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.- 15 mm nominal dia Pipes, - 15 mm nominal dia Pipes ---- etc., complete with all lead m 408.37 408.37 10.0 False None None False None False 4083.7 0 3357590 118095 None V-2 P No 120 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.- 15 mm nominal dia Pipes, - 20 mm nominal dia Pipes ---- etc., complete with all lead m 500.88 500.88 25.0 False None None False None False 12522.0 0 3357591 118095 None V-2 P No 120 Item No 13.33.1 External & Shafts & Terrace Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) -15 mm nominal dia Pipes ---- etc., complete with all lead m 219.38 219.38 10.0 False None None False None False 2193.8 0 3357592 118095 None V-2 P No 120 Item No 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) -20 mm nominal dia Pipes ---- etc., complete with all lead m 286.78 286.78 20.0 False None None False None False 5735.6 0 3357593 118095 None V-2 P No 120 Item No 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) - 40 mm nominal dia Pipes ---- etc., complete with all lead m 630.4 630.4 50.0 False None None False None False 31520.0 0 3357594 118095 None V-2 P No A-14 Item No 86 Providing and fixing Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 211.45 211.45 3.0 False None None False None False 634.35 0 1719380394000 0 None None Buildings PHE Works FF Hitlamakki FF Slice -4 116131.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357595 118096 None V-2 P No 28 Item No 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. -40mm dia pipes, From wash basin waste lines - FF ---- etc., complete with all lead m 122.8 122.8 10.0 False None None False None False 1228.0 0 3357596 118096 None V-5 P No 191 Item No 16.7.4 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, From Sink & Urinal lines - FF ---- etc., complete with all lead m 185.53 185.53 10.0 False None None False None False 1855.3 0 3357597 118096 None V-5 P No A-44 Item No 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines -FF ---- etc., complete with all lead m 164.18 164.18 20.0 False None None False None False 3283.6 0 3357598 118096 None V-5 P No A-44 Item No 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 340.37 340.37 30.0 False None None False None False 10211.1 0 3357599 118096 None V-2 P No 128 Item No 14.31 Sanitary and CP fixtures - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. - FF Toilet ---- etc., complete with all lead Nos. 1628.47 1628.47 2.0 False None None False None False 3256.94 0 3357600 118096 None V-2 P No 116 Item No 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter -FF ---- etc., complete with all lead Nos. 372.41 372.41 2.0 False None None False None False 744.82 0 3357601 118096 None V-2 P No 127 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. -FF ---- etc., complete with all lead Nos. 7424.24 7424.24 2.0 False None None False None False 14848.48 0 3357602 118096 None V-2 P No 130 Item No 14.40.2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. -FF ---- etc., complete with all lead Nos. 662.06 662.06 2.0 False None None False None False 1324.12 0 3357603 118096 None V-2 P No 123 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid - FF Toilet ---- etc., complete with all lead Nos. 7978.19 7978.19 1.0 False None None False None False 7978.19 0 3357604 118096 None V-2 P No 178 Item No 20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4734.59 4734.59 1.0 False None None False None False 4734.59 0 3357605 118096 None V-2 P No 124 Item No14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead Nos. 5945.27 5945.27 1.0 False None None False None False 5945.27 0 3357606 118096 None V-2 P No 126 Item No 14.10.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead Nos. 6449.83 6449.83 1.0 False None None False None False 6449.83 0 3357607 118096 None V-2 P No A-16 Item No 166 Providing and fixing C.P. Brass stop cock (concealed) 15 mm ---- etc., complete with all lead Nos. 700.77 700.77 2.0 False None None False None False 1401.54 0 3357608 118096 None V-2 P No 124 Item No 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead Nos. 4113.9 4113.9 2.0 False None None False None False 8227.8 0 3357609 118096 None V-2 P No 120 Item No 13.32.1 WATER SUPPLY - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. -15 mm nominal dia Pipes ---- etc., complete with all lead m 412.45 412.45 15.0 False None None False None False 6186.75 0 3357610 118096 None V-2 P No 120 Item No 13.32.2 WATER SUPPLY - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes ---- etc., complete with all lead m 505.89 505.89 50.0 False None None False None False 25294.5 0 3357611 118096 None V-2 P No 120 Item No 13.32.3 WATER SUPPLY - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes ---- etc., complete with all lead m 636.7 636.7 20.0 False None None False None False 12734.0 0 3357612 118096 None V-2 P No A-14 Item No 86 Providing and fixing Brass bib-cock 15 mm dia - FF ---- etc., complete with all lead Each 213.57 213.57 2.0 False None None False None False 427.14 0 1719380394000 0 None None Buildings PHE External works Hitlamakki Slice-5 99949.43 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357613 118097 None V-1 P No 6 Item No 1.5.1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. -In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 302.64 302.64 34.0 False None None False None False 10289.76 0 3357614 118097 None V-1 P No 7 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 351.54 351.54 34.0 False None None False None False 11952.36 0 3357615 118097 None V-5 P No 113 Item No 10.2.4 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Sanitary Work ).- Pipes of SN4, 160mm dia. ---- etc., complete with all lead m 761.24 761.24 50.0 False None None False None False 38062.0 0 3357616 118097 None V-5 P No 191 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(INSPECTION CHAMBER) ---- etc., complete with all lead Nos. 7208.0 7208.0 5.0 False None None False None False 36040.0 0 3357617 118097 None V2 P No 127 Item No 13.58 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead Nos. 457.27 457.27 4.0 False None None False None False 1829.08 0 3357618 118097 None V-2 P No 191 Item No 13.23.5 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead Nos. 1776.23 1776.23 1.0 False None None False None False 1776.23 0 1719380394000 0 None None Buildings Sump tank works Hitlamakki Slice -6 103360.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357619 118098 None V-1,It no 1.14.1 SR 2021-22 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m all materials, labour, HOM of machinery, curing complete as per specifications (V-1,It no 1.14.1 SR 2021-22) - Sump tank ---- etc., complete with all lead Cum 134.8 134.8 15.75 False None None False None False 2123.1 0 3357620 118098 None V-1,It no 2.1.3 SR2021-22 Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @ 180kgs with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and the aggregtes @ 0.57cum machine mixed, machine mixed concrete laid in layers not exceeding 15cms thick well compacted in foundation and plinth including cost of all materials, labour, HOM of machinery, curing complete as per specifications. (V-1,It no 2.1.3 SR2021-22) ---- etc., complete with all lead Cum 6707.68 6707.68 1.0 False None None False None False 6707.68 0 3357621 118098 None V-1,It no 2.2.1 SR2021-22 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesall materials, labour, HOM of machinery, curing complete as per specifications (V-1,It no 2.2.1 SR2021-22) - Bottom slab ---- etc., complete with all lead Cum 7252.68 7252.68 1.26 False None None False None False 9138.3768 0 3357622 118098 None V-1,It no 2.3.2 SR2021-22 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (V-1,It no 2.3.2 SR2021-22) ---- etc., complete with all lead Cum 7983.36 7983.36 4.58 False None None False None False 36563.7888 0 3357623 118098 None V-2 It no 11.32 SR2023-24 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- etc., complete with all lead Kgs 100191.84 100191.84 0.46 False None None False None False 46088.2464 0 3357624 118098 None V-2,It no 8.8 SR2021-22 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V-2,It no 8.8 SR2021-22)- Above G.L. Out side ---- etc., complete with all lead Sqm 415.52 415.52 3.5 False None None False None False 1454.32 0 3357625 118098 None It. No. 15.24, Page No. 113 DWD SR 2018 - 19 KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification(It. No. 15.24, Page No. 113 DWD SR 2018 - 19) ---- etc., complete with all lead Cum 5.6 5.6 3.5 False None None False None False 19.6 0 3357626 118098 None V-1,It no 1.9 SR2021-22 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (V-1,It no 1.9 SR2021-22) ---- etc., complete with all lead Cum 351.55 351.55 3.6 False None None False None False 1265.58 0 1719380394000 0 None None Buildings Electrical works Hitlamakki Slice -7 461725.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357627 118099 None 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 317.42 317.42 25.0 False None None False None False 7935.5 0 3357628 118099 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 447.22 447.22 20.0 False None None False None False 8944.4 0 3357629 118099 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 15.0 False None None False None False 9823.5 0 3357630 118099 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead Each 187.62 187.62 21.0 False None None False None False 3940.02 0 3357631 118099 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead Each 208.86 208.86 6.0 False None None False None False 1253.16 0 3357632 118099 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead Each 259.6 259.6 2.0 False None None False None False 519.2 0 3357633 118099 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 307.98 307.98 13.0 False None None False None False 4003.74 0 3357634 118099 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead Each 376.42 376.42 4.0 False None None False None False 1505.68 0 3357635 118099 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3Module ---- etc., complete with all lead Each 189.98 189.98 21.0 False None None False None False 3989.58 0 3357636 118099 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4-5Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3357637 118099 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3357638 118099 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3357639 118099 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3357640 118099 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3357641 118099 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3357642 118099 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 37.0 False None None False None False 7465.86 0 3357643 118099 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3357644 118099 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3357645 118099 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead Each 384.68 384.68 11.0 False None None False None False 4231.48 0 3357646 118099 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3357647 118099 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3357648 118099 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3357649 118099 None I-1.13 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3357650 118099 None 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 300.0 False None None False None False 23364.0 0 3357651 118099 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 300.0 False None None False None False 27612.0 0 3357652 118099 None 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 110.0 False None None False None False 8826.4 0 3357653 118099 None 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 95.0 False None None False None False 8855.9 0 3357654 118099 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead m 30.68 30.68 125.0 False None None False None False 3835.0 0 3357655 118099 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead m 49.56 49.56 450.0 False None None False None False 22302.0 0 3357656 118099 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead m 74.34 74.34 380.0 False None None False None False 28249.2 0 3357657 118099 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II- Double Door 12 Way SP & N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3357658 118099 None 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3357659 118099 None 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead Each 2992.48 2992.48 2.0 False None None False None False 5984.96 0 3357660 118099 None I-32.03 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 10 sqmm ---- etc., complete with all lead Km 175362.16 175362.16 0.1 False None None False None False 17536.216 0 3357661 118099 None I-31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead Km 19067.62 19067.62 0.1 False None None False None False 1906.762 0 3357662 118099 None SR 19-20 - 6.6.2 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard) ---- etc., complete with all lead m 120.36 120.36 20.0 False None None False None False 2407.2 0 3357663 118099 None SR 19-20- 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm ---- etc., complete with all lead m 395.3 395.3 5.0 False None None False None False 1976.5 0 3357664 118099 None I-12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3357665 118099 None SR 19-20- 6.18 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG-GI Wire ---- etc., complete with all lead m 22.42 22.42 5.0 False None None False None False 112.1 0 3357666 118099 None 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 96.76 96.76 50.0 False None None False None False 4838.0 0 3357667 118099 None 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead Each 814.2 814.2 25.0 False None None False None False 20355.0 0 3357668 118099 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ---- etc., complete with all lead Each 1044.3 1044.3 2.0 False None None False None False 2088.6 0 3357669 118099 None 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3357670 118099 None 11.11.7 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete with all lead Each 502.68 502.68 10.0 False None None False None False 5026.8 0 3357671 118099 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete with all lead No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3357672 118099 None I-12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead No 61.36 61.36 2.0 False None None False None False 122.72 0 3357673 118099 None I-6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3357674 118099 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3357675 118099 None I-12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead Each 74.34 74.34 19.0 False None None False None False 1412.46 0 3357676 118099 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3357677 118099 None I-13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete with all lead Each 371.7 371.7 12.0 False None None False None False 4460.4 0 3357678 118099 None I-13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3357679 118099 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3357680 118099 None I-13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3357681 118099 None 7.1.3 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 25Litres ---- etc., complete with all lead Each 12085.56 12085.56 1.0 False None None False None False 12085.56 0 3357682 118099 None 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.51 0.51 48000.0 False None None False None False 24480.0 0 3357683 118099 None 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3357684 118099 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead m 359.9 359.9 3.0 False None None False None False 1079.7 0 3357685 118099 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 892.08 892.08 3.0 False None None False None False 2676.24 0 3357686 118099 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 100Amps 25kA ---- etc., complete with all lead Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3357687 118099 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3357688 118099 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3357689 118099 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3357690 118099 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3357691 118099 None 5.12.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3357692 118099 None I-5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3357693 118099 None I-5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3357694 118099 None I-5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3357695 118099 None I-5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3357696 118099 None I-5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3357697 118099 None I-5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719380394000 0 None None Buildings Civil Works Kolikere Slice -8 5648537.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357698 118100 None I-1.12 P-8 V-1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 125.55 125.55 29.03 False None None False None False 3644.7165 0 3357699 118100 None I-1.14.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead Cum 134.8 134.8 308.46 False None None False None False 41580.408 0 3357700 118100 None I-1.15.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- etc., complete with all lead Cum 479.74 479.74 14.56 False None None False None False 6985.0144 0 3357701 118100 None I-1.1 a P-5 V-3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete with all lead Cum 178.42 178.42 34.6 False None None False None False 6173.332 0 3357702 118100 None I-1.8 P-7 V-1 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 626.44 626.44 142.53 False None None False None False 89286.4932 0 3357703 118100 None I-2.1.3 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7915.06 7915.06 25.42 False None None False None False 201200.8252 0 3357704 118100 None I-2.2.1 P-15 V-1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8558.17 8558.17 38.38 False None None False None False 328462.5646 0 3357705 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS GF ---- etc., complete with all lead Cum 14895.75 14895.75 6.35 False None None False None False 94588.0125 0 3357706 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS FF ---- etc., complete with all lead Cum 15044.71 15044.71 3.53 False None None False None False 53107.8263 0 3357707 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM, RCC SLAB, RCC STAIRCASE GROUND FLOOR ---- etc., complete with all lead Cum 13143.31 13143.31 30.06 False None None False None False 395087.8986 0 3357708 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB, RCC STAIRCASE FF ---- etc., complete with all lead Cum 13274.75 13274.75 8.55 False None None False None False 113499.1125 0 3357709 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS, LINTELS GF ---- etc., complete with all lead Cum 14019.53 14019.53 10.83 False None None False None False 151831.5099 0 3357710 118100 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS FF ---- etc., complete with all lead Cum 14159.73 14159.73 7.74 False None None False None False 109596.3102 0 3357711 118100 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates GF ---- etc., complete with all lead Cum 8216.39 8216.39 1.59 False None None False None False 13064.0601 0 3357712 118100 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates FF ---- etc., complete with all lead Cum 8298.55 8298.55 1.21 False None None False None False 10041.2455 0 3357713 118100 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CHEJJA GF ---- etc., complete with all lead Cum 11913.76 11913.76 0.43 False None None False None False 5122.9168 0 3357714 118100 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CHEJJA FF ---- etc., complete with all lead Cum 12032.9 12032.9 0.43 False None None False None False 5174.147 0 3357715 118100 None I-2.11 a P-18 V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification- GF ---- etc., complete with all lead Tonne 118226.37 118226.37 7.47 False None None False None False 883150.9839 0 3357716 118100 None I-2.11 a P-18 V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification FF ---- etc., complete with all lead Tonne 119408.63 119408.63 1.64 False None None False None False 195830.1532 0 3357717 118100 None A.R Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead Rmtr 86.14 86.14 55.85 False None None False None False 4810.919 0 3357718 118100 None I-5.5 P-9 V-2 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. ---- etc., complete with all lead Cum 8423.88 8423.88 8.04 False None None False None False 67727.9952 0 3357719 118100 None I-6.32 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead Sqm 1731.3 1731.3 164.9 False None None False None False 285491.37 0 3357720 118100 None I-6.32 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead Sqm 1748.61 1748.61 166.57 False None None False None False 291265.9677 0 3357721 118100 None I-6.34 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead Sqm 1459.05 1459.05 35.01 False None None False None False 51081.3405 0 3357722 118100 None I-6.34 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead Sqm 1473.64 1473.64 48.02 False None None False None False 70764.1928 0 3357723 118100 None I-12.93.2 P-100 V-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) GF ---- etc., complete with all lead m 1009.7 1009.7 42.4 False None None False None False 42811.28 0 3357724 118100 None I-12.93.2 P-100 V-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) FF ---- etc., complete with all lead m 1019.8 1019.8 26.2 False None None False None False 26718.76 0 3357725 118100 None I-12.51 P-105 V-2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GF ---- etc., complete with all lead Nos 1342.75 1342.75 6.0 False None None False None False 8056.5 0 3357726 118100 None I-12.51 P-105 V-2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF ---- etc., complete with all lead Nos 1356.17 1356.17 4.0 False None None False None False 5424.68 0 3357727 118100 None I-12.60 P-107 V-2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. GF ---- etc., complete with all lead Nos 1390.32 1390.32 6.0 False None None False None False 8341.92 0 3357728 118100 None I-12.60 P-107 V-2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FF ---- etc., complete with all lead Nos 1404.23 1404.23 4.0 False None None False None False 5616.92 0 3357729 118100 None I-12.61 P-107 V-2 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. GF ---- etc., complete with all lead Nos 1308.38 1308.38 6.0 False None None False None False 7850.28 0 3357730 118100 None I-12.61 P-107 V-2 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. FF ---- etc., complete with all lead Nos 1321.47 1321.47 4.0 False None None False None False 5285.88 0 3357731 118100 None I-12.62 P-107 V-2 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete GF ---- etc., complete with all lead Nos 313.22 313.22 12.0 False None None False None False 3758.64 0 3357732 118100 None I-12.62 P-107 V-2 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete FF ---- etc., complete with all lead Nos 316.35 316.35 8.0 False None None False None False 2530.8 0 3357733 118100 None I-12.63 P-107 V-2 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete GF ---- etc., complete with all lead Nos 171.81 171.81 12.0 False None None False None False 2061.72 0 3357734 118100 None I-12.63 P-107 V-2 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete FF ---- etc., complete with all lead Nos 173.53 173.53 8.0 False None None False None False 1388.24 0 3357735 118100 None I-12.64 P-107 V-2 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms GF ---- etc., complete with all lead Nos 72.69 72.69 6.0 False None None False None False 436.14 0 3357736 118100 None I-12.64 P-107 V-2 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms FF ---- etc., complete with all lead Nos 73.41 73.41 4.0 False None None False None False 293.64 0 3357737 118100 None I-12.75.1 P-108 V-2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) GF ---- etc., complete with all lead Nos 363.44 363.44 12.0 False None None False None False 4361.28 0 3357738 118100 None I-12.75.1 P-108 V-2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FF ---- etc., complete with all lead Nos 367.07 367.07 8.0 False None None False None False 2936.56 0 3357739 118100 None I-10.6.3 P-69 V-2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF ---- etc., complete with all lead Nos 79.3 79.3 36.0 False None None False None False 2854.8 0 3357740 118100 None I-10.6.3 P-69 V-2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF ---- etc., complete with all lead Nos 80.09 80.09 4.0 False None None False None False 320.36 0 3357741 118100 None I-20.80 P-205 V-2 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead Rmtr 55.51 55.51 35.4 False None None False None False 1965.054 0 3357742 118100 None I-20.80 P-205 V-2 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead Rmtr 56.06 56.06 23.0 False None None False None False 1289.38 0 3357743 118100 None I-12.57.4 P-106 V-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak GF ---- etc., complete with all lead Sqm 5989.49 5989.49 14.88 False None None False None False 89123.6112 0 3357744 118100 None I-12.57.4 P-106 V-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak FF ---- etc., complete with all lead Sqm 6049.39 6049.39 9.12 False None None False None False 55170.4368 0 3357745 118100 None I-11.35.2.2 P-110 V-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. GF ---- etc., complete with all lead Sqm 754.63 754.63 62.1 False None None False None False 46862.523 0 3357746 118100 None I-11.35.2.2 P-110 V-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. FF ---- etc., complete with all lead Sqm 762.18 762.18 55.35 False None None False None False 42186.663 0 3357747 118100 None I-11.37.1 P-110 V-2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge GF ---- etc., complete with all lead Sqm 1305.74 1305.74 12.42 False None None False None False 16217.2908 0 3357748 118100 None I-11.37.1 P-110 V-2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge FF ---- etc., complete with all lead Sqm 1318.8 1318.8 11.07 False None None False None False 14599.116 0 3357749 118100 None I-11.34A P-110 V-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF ---- etc., complete with all lead Kg 222.03 222.03 260.82 False None None False None False 57909.8646 0 3357750 118100 None I-11.34A P-110 V-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF ---- etc., complete with all lead Kg 224.25 224.25 199.26 False None None False None False 44684.055 0 3357751 118100 None I-12.96 P-112 V-2 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. GF ---- etc., complete with all lead m 849.79 849.79 19.8 False None None False None False 16825.842 0 3357752 118100 None I-12.96 P-112 V-2 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. FF ---- etc., complete with all lead m 858.29 858.29 9.9 False None None False None False 8497.071 0 3357753 118100 None I-12.99.1 P-112 V-2 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames GF ---- etc., complete with all lead Sqm 4234.41 4234.41 6.3 False None None False None False 26676.783 0 3357754 118100 None I-12.99.1 P-112 V-2 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames FF ---- etc., complete with all lead Sqm 4276.75 4276.75 3.15 False None None False None False 13471.7625 0 3357755 118100 None I-8.10 P-112 V-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 278.86 278.86 104.03 False None None False None False 29009.8058 0 3357756 118100 None I-8.10 P-112 V-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 281.65 281.65 118.01 False None None False None False 33237.5165 0 3357757 118100 None I-8.5.2 P-42 V-2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) GF ---- etc., complete with all lead Sqm 461.24 461.24 354.46 False None None False None False 163491.1304 0 3357758 118100 None I-8.5.2 P-42 V-2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) FF ---- etc., complete with all lead Sqm 465.85 465.85 250.13 False None None False None False 116523.0605 0 3357759 118100 None I-8.51 P-50 V-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GF ---- etc., complete with all lead Sqm 132.16 132.16 441.91 False None None False None False 58402.8256 0 3357760 118100 None I-8.51 P-50 V-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF ---- etc., complete with all lead Sqm 133.48 133.48 368.14 False None None False None False 49139.3272 0 3357761 118100 None I-8.9 P-42 V-2 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Outside) GF ---- etc., complete with all lead Sqm 508.82 508.82 196.14 False None None False None False 99799.9548 0 3357762 118100 None I-8.9 P-42 V-2 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Outside) FF ---- etc., complete with all lead Sqm 513.9 513.9 215.75 False None None False None False 110873.925 0 3357763 118100 None I-8.2.1 P-41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 389.87 389.87 36.98 False None None False None False 14417.3926 0 3357764 118100 None I-8.2.1 P-41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 393.77 393.77 27.87 False None None False None False 10974.3699 0 3357765 118100 None I-8.16.2 P-43 V-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide GF ---- etc., complete with all lead Rmtr 50.22 50.22 830.62 False None None False None False 41713.7364 0 3357766 118100 None I-15.7 P-134 V-2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) GF ---- etc., complete with all lead Sqm 812.78 812.78 12.24 False None None False None False 9948.4272 0 3357767 118100 None I-15.7 P-134 V-2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) FF ---- etc., complete with all lead Sqm 820.91 820.91 8.94 False None None False None False 7338.9354 0 3357768 118100 None I-8.79 P-54 V-2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete with all lead Rmtr 68.72 68.72 238.64 False None None False None False 16399.3408 0 3357769 118100 None I-8.79 P-54 V-2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete with all lead Rmtr 69.41 69.41 160.83 False None None False None False 11163.2103 0 3357770 118100 None I-9.17.2 P-62 V-2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. GF ---- etc., complete with all lead Sqm 1552.88 1552.88 89.09 False None None False None False 138346.0792 0 3357771 118100 None I-9.17.2 P-62 V-2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. FF ---- etc., complete with all lead Sqm 1568.41 1568.41 54.78 False None None False None False 85917.4998 0 3357772 118100 None I-9.23 P-63 V-2 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. GF ---- etc., complete with all lead Sqm 3259.07 3259.07 31.52 False None None False None False 102725.8864 0 3357773 118100 None I-9.23 P-63 V-2 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. FF ---- etc., complete with all lead Sqm 3291.66 3291.66 3.64 False None None False None False 11981.6424 0 3357774 118100 None I-9.11 P-60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. GF ---- etc., complete with all lead Sqm 1174.9 1174.9 5.86 False None None False None False 6884.914 0 3357775 118100 None I-9.11 P-60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF ---- etc., complete with all lead Sqm 1186.65 1186.65 5.98 False None None False None False 7096.167 0 3357776 118100 None I-9.39 P-65 V-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead Sqm 1915.0 1915.0 36.98 False None None False None False 70816.7 0 3357777 118100 None I-9.39 P-65 V-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead Sqm 1934.15 1934.15 27.87 False None None False None False 53904.7605 0 3357778 118100 None I-9.14 P-61 V-2 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. GF ---- etc., complete with all lead Sqm 466.52 466.52 42.84 False None None False None False 19985.7168 0 3357779 118100 None I-9.14 P-61 V-2 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. FF ---- etc., complete with all lead Sqm 471.19 471.19 33.85 False None None False None False 15949.7815 0 3357780 118100 None I-11.16.1 P-82 V-2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GF ---- etc., complete with all lead Kg 179.74 179.74 259.2 False None None False None False 46588.608 0 3357781 118100 None I-8.39 P-48 V-2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 167.84 167.84 441.91 False None None False None False 74170.1744 0 3357782 118100 None I-8.39 P-48 V-2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 169.52 169.52 250.13 False None None False None False 42402.0376 0 3357783 118100 None I-8.32 P-45 V-2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 206.17 206.17 196.14 False None None False None False 40438.1838 0 3357784 118100 None I-8.32 P-45 V-2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 208.23 208.23 215.75 False None None False None False 44925.6225 0 3357785 118100 None I-8.34.3 P-47 V-2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 66.74 66.74 12.42 False None None False None False 828.9108 0 3357786 118100 None I-8.34.3 P-47 V-2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 49.39 49.39 14.4 False None None False None False 711.216 0 3357787 118100 None I-8.40 P-48 V-2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 151.98 151.98 12.42 False None None False None False 1887.5916 0 3357788 118100 None I-8.40 P-48 V-2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 153.5 153.5 11.07 False None None False None False 1699.245 0 3357789 118100 None I-8.34.1 P-47 V-2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 70.04 70.04 35.71 False None None False None False 2501.1284 0 3357790 118100 None I-8.34.1 P-47 V-2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 70.75 70.75 21.89 False None None False None False 1548.7175 0 3357791 118100 None I-8.47 P-49 V-2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 178.42 178.42 35.71 False None None False None False 6371.3782 0 3357792 118100 None I-8.47 P-49 V-2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 180.2 180.2 21.89 False None None False None False 3944.578 0 3357793 118100 None I-7.18 P-23 V-2 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. FF ---- etc., complete with all lead Cum 2692.32 2692.32 1.2 False None None False None False 3230.784 0 3357794 118100 None V-1,It no 2.3.2 SR2021-22 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9420.36 9420.36 4.58 False None None False None False 43145.2488 0 3357795 118100 None V-2,It no 8.8 SR2021-22 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 490.31 490.31 3.5 False None None False None False 1716.085 0 3357796 118100 None I No. 15.24, Page No. 113 DWD SR 2018 - 19 KSRB 15-4.2: Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers for cmement mortar 1:4, 12mm thick cost of materials complete as per specification ---- etc., complete with all lead Sqm 6.61 6.61 3.5 False None None False None False 23.135 0 3357797 118100 None V-1,It no 1.9 SR2023-24 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 351.55 351.55 3.6 False None None False None False 1265.58 0 1719380394000 0 None None Buildings Water Supply Works Kolikere Slice -9 373823.59 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357798 118101 None I-14.28.2.2 P-28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines GF ---- etc., complete with all lead Each 121.59 121.59 10.0 False None None False None False 1215.9 0 3357799 118101 None I-14.28.2.2 P-28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines FF ---- etc., complete with all lead Each 122.8 122.8 10.0 False None None False None False 1228.0 0 3357800 118101 None I-16.7.4 P-191 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, GF ---- etc., complete with all lead m 183.7 183.7 10.0 False None None False None False 1837.0 0 3357801 118101 None I-16.7.4 P-191 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, FF ---- etc., complete with all lead m 185.54 185.54 10.0 False None None False None False 1855.4 0 3357802 118101 None I-657 P-A44 V-5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines GF ---- etc., complete with all lead m 162.56 162.56 80.0 False None None False None False 13004.8 0 3357803 118101 None I-657 P-A44 V-5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines FF ---- etc., complete with all lead m 164.18 164.18 20.0 False None None False None False 3283.6 0 3357804 118101 None I-647 P-A44 V-5 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines GF ---- etc., complete with all lead m 337.01 337.01 50.0 False None None False None False 16850.5 0 3357805 118101 None I-647 P-A44 V-5 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines FF ---- etc., complete with all lead m 340.38 340.38 30.0 False None None False None False 10211.4 0 3357806 118101 None I-13.47 P-125 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter GF ---- etc., complete with all lead m 260.36 260.36 20.0 False None None False None False 5207.2 0 3357807 118101 None I-13.48 P-125 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter GF ---- etc., complete with all lead m 384.59 384.59 25.0 False None None False None False 9614.75 0 3357808 118101 None I-14.31 P-128 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. GF ---- etc., complete with all lead No 1612.35 1612.35 3.0 False None None False None False 4837.05 0 3357809 118101 None I-14.31 P-128 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. FF ---- etc., complete with all lead No 1628.48 1628.48 2.0 False None None False None False 3256.96 0 3357810 118101 None I-13.9.2 P-118 V-2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter GF ---- etc., complete with all lead No 368.73 368.73 1.0 False None None False None False 368.73 0 3357811 118101 None I-13.9.2 P-118 V-2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter FF ---- etc., complete with all lead No 372.41 372.41 2.0 False None None False None False 744.82 0 3357812 118101 None I-14.22B P-127 V-2 Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. GF ---- etc., complete with all lead No 7350.74 7350.74 1.0 False None None False None False 7350.74 0 3357813 118101 None I-14.22B P-127 V-2 Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. FF ---- etc., complete with all lead No 7424.25 7424.25 2.0 False None None False None False 14848.5 0 3357814 118101 None I-14.40.2 P-130 V-2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. GF ---- etc., complete with all lead No 655.51 655.51 3.0 False None None False None False 1966.53 0 3357815 118101 None I-14.40.2 P-130 V-2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. FF ---- etc., complete with all lead No 662.07 662.07 2.0 False None None False None False 1324.14 0 3357816 118101 None I-14.3.1 P-131 V-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid GF ---- etc., complete with all lead No 7899.2 7899.2 1.0 False None None False None False 7899.2 0 3357817 118101 None I-14.3.1 P-131 V-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid FF ---- etc., complete with all lead No 7978.2 7978.2 1.0 False None None False None False 7978.2 0 3357818 118101 None I-20.44.2 P-178 V-2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm GF ---- etc., complete with all lead Each 4687.72 4687.72 1.0 False None None False None False 4687.72 0 3357819 118101 None I-20.44.2 P-178 V-2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm FF ---- etc., complete with all lead Each 4734.59 4734.59 1.0 False None None False None False 4734.59 0 3357820 118101 None I-14.4.1 P-124 V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern GF ---- etc., complete with all lead No 5886.41 5886.41 1.0 False None None False None False 5886.41 0 3357821 118101 None I-14.4.1 P-124 V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern FF ---- etc., complete with all lead No 5945.27 5945.27 1.0 False None None False None False 5945.27 0 3357822 118101 None I-14.11.2 P-126 V-2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm GF ---- etc., complete with all lead No 6716.37 6716.37 1.0 False None None False None False 6716.37 0 3357823 118101 None I-166 P-A16 V-2 Providing and fixing C.P. Brass stop cock (concealed) 15 mm GF ---- etc., complete with all lead No 693.84 693.84 2.0 False None None False None False 1387.68 0 3357824 118101 None I-166 P-A16 V-2 Providing and fixing C.P. Brass stop cock (concealed) 15 mm FF ---- etc., complete with all lead No 700.78 700.78 2.0 False None None False None False 1401.56 0 3357825 118101 None I-14.7.1 P-124 V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps GF ---- etc., complete with all lead No 4073.17 4073.17 3.0 False None None False None False 12219.51 0 3357826 118101 None I-14.7.1 P-124 V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps FF ---- etc., complete with all lead No 4113.9 4113.9 2.0 False None None False None False 8227.8 0 3357827 118101 None I-13.32.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes GF ---- etc., complete with all lead m 408.37 408.37 10.0 False None None False None False 4083.7 0 3357828 118101 None I-13.32.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes FF ---- etc., complete with all lead m 412.46 412.46 15.0 False None None False None False 6186.9 0 3357829 118101 None I-13.32.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes GF ---- etc., complete with all lead m 500.89 500.89 25.0 False None None False None False 12522.25 0 3357830 118101 None I-13.32.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes FF ---- etc., complete with all lead m 505.9 505.9 50.0 False None None False None False 25295.0 0 3357831 118101 None I-13.32.3 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes FF ---- etc., complete with all lead m 636.71 636.71 20.0 False None None False None False 12734.2 0 3357832 118101 None I-13.33.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 15 mm nominal dia Pipes GF ---- etc., complete with all lead m 219.39 219.39 10.0 False None None False None False 2193.9 0 3357833 118101 None I-13.33.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes GF ---- etc., complete with all lead m 286.79 286.79 20.0 False None None False None False 5735.8 0 3357834 118101 None I-13.33.5 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes GF ---- etc., complete with all lead m 630.4 630.4 50.0 False None None False None False 31520.0 0 3357835 118101 None I-86 P-A14 V-2 Providing and fixing Brass bib-cock 15 mm dia GF ---- etc., complete with all lead Each 211.46 211.46 3.0 False None None False None False 634.38 0 3357836 118101 None I-86 P-A14 V-2 Providing and fixing Brass bib-cock 15 mm dia FF ---- etc., complete with all lead Each 213.57 213.57 2.0 False None None False None False 427.14 0 3357837 118101 None I-14.10.1.4 P-126 V-2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead Nos 6449.83 6449.83 1.0 False None None False None False 6449.83 0 3357838 118101 None I-1.5.1 P-6 V-1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 302.65 302.65 34.0 False None None False None False 10290.1 0 3357839 118101 None I-1.9 P-7 V-1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 351.55 351.55 34.0 False None None False None False 11952.7 0 3357840 118101 None I-10.2.4 P-113 V-5 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead m 761.24 761.24 50.0 False None None False None False 38062.0 0 3357841 118101 None I-16.9 P-191 V-5 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(INSPECTION CHAMBER) ---- etc., complete with all lead No 7208.01 7208.01 5.0 False None None False None False 36040.05 0 3357842 118101 None I-13.58 P-127 V-2 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead No 457.27 457.27 4.0 False None None False None False 1829.08 0 3357843 118101 None I-13.23.5 P-121 V-2 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead No 1776.23 1776.23 1.0 False None None False None False 1776.23 0 1719380394000 0 None None Buildings Electrical works Kolikere Slice -10 461725.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357844 118102 None 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 317.42 317.42 25.0 False None None False None False 7935.5 0 3357845 118102 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 447.22 447.22 20.0 False None None False None False 8944.4 0 3357846 118102 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 15.0 False None None False None False 9823.5 0 3357847 118102 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead Each 187.62 187.62 21.0 False None None False None False 3940.02 0 3357848 118102 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead Each 208.86 208.86 6.0 False None None False None False 1253.16 0 3357849 118102 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead Each 259.6 259.6 2.0 False None None False None False 519.2 0 3357850 118102 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 307.98 307.98 13.0 False None None False None False 4003.74 0 3357851 118102 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead Each 376.42 376.42 4.0 False None None False None False 1505.68 0 3357852 118102 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3Module ---- etc., complete with all lead Each 189.98 189.98 21.0 False None None False None False 3989.58 0 3357853 118102 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4-5Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3357854 118102 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3357855 118102 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3357856 118102 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3357857 118102 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3357858 118102 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3357859 118102 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 37.0 False None None False None False 7465.86 0 3357860 118102 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3357861 118102 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3357862 118102 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead Each 384.68 384.68 11.0 False None None False None False 4231.48 0 3357863 118102 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3357864 118102 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3357865 118102 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3357866 118102 None I-1.13 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3357867 118102 None 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 300.0 False None None False None False 23364.0 0 3357868 118102 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 300.0 False None None False None False 27612.0 0 3357869 118102 None 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 110.0 False None None False None False 8826.4 0 3357870 118102 None 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 95.0 False None None False None False 8855.9 0 3357871 118102 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead m 30.68 30.68 125.0 False None None False None False 3835.0 0 3357872 118102 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead m 49.56 49.56 450.0 False None None False None False 22302.0 0 3357873 118102 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead m 74.34 74.34 380.0 False None None False None False 28249.2 0 3357874 118102 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II- Double Door 12 Way SP & N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3357875 118102 None 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3357876 118102 None 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead Each 2992.48 2992.48 2.0 False None None False None False 5984.96 0 3357877 118102 None I-32.03 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 10 sqmm ---- etc., complete with all lead Km 175362.16 175362.16 0.1 False None None False None False 17536.216 0 3357878 118102 None I-31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead Km 19067.62 19067.62 0.1 False None None False None False 1906.762 0 3357879 118102 None SR 19-20 - 6.6.2 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard) ---- etc., complete with all lead m 120.36 120.36 20.0 False None None False None False 2407.2 0 3357880 118102 None SR 19-20- 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm ---- etc., complete with all lead m 395.3 395.3 5.0 False None None False None False 1976.5 0 3357881 118102 None I-12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3357882 118102 None SR 19-20- 6.18 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG-GI Wire ---- etc., complete with all lead m 22.42 22.42 5.0 False None None False None False 112.1 0 3357883 118102 None 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 96.76 96.76 50.0 False None None False None False 4838.0 0 3357884 118102 None 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead Each 814.2 814.2 25.0 False None None False None False 20355.0 0 3357885 118102 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ---- etc., complete with all lead Each 1044.3 1044.3 2.0 False None None False None False 2088.6 0 3357886 118102 None 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3357887 118102 None 11.11.7 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete with all lead Each 502.68 502.68 10.0 False None None False None False 5026.8 0 3357888 118102 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete with all lead No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3357889 118102 None I-12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead No 61.36 61.36 2.0 False None None False None False 122.72 0 3357890 118102 None I-6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3357891 118102 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3357892 118102 None I-12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead Each 74.34 74.34 19.0 False None None False None False 1412.46 0 3357893 118102 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3357894 118102 None I-13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete with all lead Each 371.7 371.7 12.0 False None None False None False 4460.4 0 3357895 118102 None I-13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3357896 118102 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3357897 118102 None I-13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3357898 118102 None 7.1.3 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 25Litres ---- etc., complete with all lead Each 12085.56 12085.56 1.0 False None None False None False 12085.56 0 3357899 118102 None 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.51 0.51 48000.0 False None None False None False 24480.0 0 3357900 118102 None 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3357901 118102 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead m 359.9 359.9 3.0 False None None False None False 1079.7 0 3357902 118102 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 892.08 892.08 3.0 False None None False None False 2676.24 0 3357903 118102 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 100Amps 25kA ---- etc., complete with all lead Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3357904 118102 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3357905 118102 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3357906 118102 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3357907 118102 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3357908 118102 None 5.12.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3357909 118102 None I-5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3357910 118102 None I-5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3357911 118102 None I-5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3357912 118102 None I-5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3357913 118102 None I-5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3357914 118102 None I-5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719380394000 0 None None Buildings Civil works Kanamaski Slice -11 5631163.13 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3357915 118103 None I-1.12 P-8 V-1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 125.55 125.55 29.03 False None None False None False 3644.7165 0 3357916 118103 None I-1.14.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead Cum 134.8 134.8 502.86 False None None False None False 67785.528 0 3357917 118103 None I-1.15.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for the work In ordinary/soft rock without blasting upto 1.5 m depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- etc., complete with all lead Cum 479.74 479.74 14.56 False None None False None False 6985.0144 0 3357918 118103 None I-1.1 a P-5 V-3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km) ---- etc., complete with all lead Cum 178.42 178.42 34.6 False None None False None False 6173.332 0 3357919 118103 None I-1.8 P-7 V-1 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 626.44 626.44 142.53 False None None False None False 89286.4932 0 3357920 118103 None I-2.1.3 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7915.06 7915.06 25.52 False None None False None False 201992.3312 0 3357921 118103 None I-2.2.1 P-15 V-1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8558.17 8558.17 35.37 False None None False None False 302702.4729 0 3357922 118103 None I-2.2.1 P-15 V-1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PEDESTALS ---- etc., complete with all lead Cum 8558.17 8558.17 1.75 False None None False None False 14976.7975 0 3357923 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS GF ---- etc., complete with all lead Cum 14895.75 14895.75 6.35 False None None False None False 94588.0125 0 3357924 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS FF ---- etc., complete with all lead Cum 15044.71 15044.71 3.53 False None None False None False 53107.8263 0 3357925 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM, RCC SLAB, RCC STAIRCASE GROUND FLOOR ---- etc., complete with all lead Cum 13143.31 13143.31 30.06 False None None False None False 395087.8986 0 3357926 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC SLAB, RCC STAIRCASE FF ---- etc., complete with all lead Cum 13274.75 13274.75 8.55 False None None False None False 113499.1125 0 3357927 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS, LINTELS GF ---- etc., complete with all lead Cum 14019.53 14019.53 10.83 False None None False None False 151831.5099 0 3357928 118103 None I-2.5.1 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS FF ---- etc., complete with all lead Cum 14159.73 14159.73 7.74 False None None False None False 109596.3102 0 3357929 118103 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates GF ---- etc., complete with all lead Cum 8216.39 8216.39 1.59 False None None False None False 13064.0601 0 3357930 118103 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates FF ---- etc., complete with all lead Cum 8298.55 8298.55 1.21 False None None False None False 10041.2455 0 3357931 118103 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CHEJJA GF ---- etc., complete with all lead Cum 11913.76 11913.76 0.43 False None None False None False 5122.9168 0 3357932 118103 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CHEJJA FF ---- etc., complete with all lead Cum 12032.9 12032.9 0.43 False None None False None False 5174.147 0 3357933 118103 None I-2.11 a P-18 V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- etc., complete with all lead Tonne 118226.37 118226.37 7.03 False None None False None False 831131.3811 0 3357934 118103 None I-2.11 a P-18 V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- etc., complete with all lead Tonne 119408.63 119408.63 1.64 False None None False None False 195830.1532 0 3357935 118103 None A.R Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead Rmtr 86.14 86.14 55.85 False None None False None False 4810.919 0 3357936 118103 None I-5.5 P-9 V-2 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. ---- etc., complete with all lead Cum 8423.88 8423.88 8.04 False None None False None False 67727.9952 0 3357937 118103 None I-6.32 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead Sqm 1731.3 1731.3 164.9 False None None False None False 285491.37 0 3357938 118103 None I-6.32 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead Sqm 1748.61 1748.61 166.57 False None None False None False 291265.9677 0 3357939 118103 None I-6.34 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete with all lead Sqm 1459.05 1459.05 35.01 False None None False None False 51081.3405 0 3357940 118103 None I-6.34 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead Sqm 1473.64 1473.64 48.02 False None None False None False 70764.1928 0 3357941 118103 None I-12.93.2 P-100 V-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) GF ---- etc., complete with all lead m 1009.7 1009.7 42.4 False None None False None False 42811.28 0 3357942 118103 None I-12.93.2 P-100 V-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) FF ---- etc., complete with all lead m 1019.8 1019.8 26.2 False None None False None False 26718.76 0 3357943 118103 None I-12.51 P-105 V-2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GF ---- etc., complete with all lead Nos 1342.75 1342.75 6.0 False None None False None False 8056.5 0 3357944 118103 None I-12.51 P-105 V-2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF ---- etc., complete with all lead Nos 1356.17 1356.17 4.0 False None None False None False 5424.68 0 3357945 118103 None I-12.60 P-107 V-2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. GF ---- etc., complete with all lead Nos 1390.32 1390.32 6.0 False None None False None False 8341.92 0 3357946 118103 None I-12.60 P-107 V-2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. FF ---- etc., complete with all lead Nos 1404.23 1404.23 4.0 False None None False None False 5616.92 0 3357947 118103 None I-12.61 P-107 V-2 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. GF ---- etc., complete with all lead Nos 1308.38 1308.38 6.0 False None None False None False 7850.28 0 3357948 118103 None I-12.61 P-107 V-2 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. FF ---- etc., complete with all lead Nos 1321.47 1321.47 4.0 False None None False None False 5285.88 0 3357949 118103 None I-12.62 P-107 V-2 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete GF ---- etc., complete with all lead Nos 313.22 313.22 12.0 False None None False None False 3758.64 0 3357950 118103 None I-12.62 P-107 V-2 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete FF ---- etc., complete with all lead Nos 316.35 316.35 8.0 False None None False None False 2530.8 0 3357951 118103 None I-12.63 P-107 V-2 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete GF ---- etc., complete with all lead Nos 171.81 171.81 12.0 False None None False None False 2061.72 0 3357952 118103 None I-12.63 P-107 V-2 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete FF ---- etc., complete with all lead Nos 173.53 173.53 8.0 False None None False None False 1388.24 0 3357953 118103 None I-12.64 P-107 V-2 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms GF ---- etc., complete with all lead Nos 72.69 72.69 6.0 False None None False None False 436.14 0 3357954 118103 None I-12.64 P-107 V-2 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms FF ---- etc., complete with all lead Nos 73.41 73.41 4.0 False None None False None False 293.64 0 3357955 118103 None I-12.75.1 P-108 V-2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) GF ---- etc., complete with all lead Nos 363.44 363.44 12.0 False None None False None False 4361.28 0 3357956 118103 None I-12.75.1 P-108 V-2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) FF ---- etc., complete with all lead Nos 367.07 367.07 8.0 False None None False None False 2936.56 0 3357957 118103 None I-10.6.3 P-69 V-2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF ---- etc., complete with all lead Nos 79.3 79.3 36.0 False None None False None False 2854.8 0 3357958 118103 None I-10.6.3 P-69 V-2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF ---- etc., complete with all lead Nos 80.09 80.09 4.0 False None None False None False 320.36 0 3357959 118103 None I-20.80 P-205 V-2 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead Rmtr 55.51 55.51 49.56 False None None False None False 2751.0756 0 3357960 118103 None I-20.80 P-205 V-2 Supplying and fixing new Honne wood beads wherever necessary including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead Rmtr 56.06 56.06 23.0 False None None False None False 1289.38 0 3357961 118103 None I-12.57.4 P-106 V-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak GF ---- etc., complete with all lead Sqm 5989.49 5989.49 14.88 False None None False None False 89123.6112 0 3357962 118103 None I-12.57.4 P-106 V-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak FF ---- etc., complete with all lead Sqm 6049.39 6049.39 9.12 False None None False None False 55170.4368 0 3357963 118103 None I-11.35.2.2 P-110 V-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. GF ---- etc., complete with all lead Sqm 754.63 754.63 62.1 False None None False None False 46862.523 0 3357964 118103 None I-11.35.2.2 P-110 V-2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Note : Double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. FF ---- etc., complete with all lead Sqm 762.18 762.18 55.35 False None None False None False 42186.663 0 3357965 118103 None I-11.37.1 P-110 V-2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge GF ---- etc., complete with all lead Sqm 1305.74 1305.74 12.42 False None None False None False 16217.2908 0 3357966 118103 None I-11.37.1 P-110 V-2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge FF ---- etc., complete with all lead Sqm 1318.8 1318.8 11.07 False None None False None False 14599.116 0 3357967 118103 None I-11.34A P-110 V-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF ---- etc., complete with all lead Kg 222.03 222.03 260.82 False None None False None False 57909.8646 0 3357968 118103 None I-11.34A P-110 V-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF ---- etc., complete with all lead Kg 224.25 224.25 199.26 False None None False None False 44684.055 0 3357969 118103 None I-12.96 P-112 V-2 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. GF ---- etc., complete with all lead m 849.79 849.79 19.8 False None None False None False 16825.842 0 3357970 118103 None I-12.96 P-112 V-2 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass form all sides. MS stay shall be provided at the bottom to steady the frame. FF ---- etc., complete with all lead m 858.29 858.29 9.9 False None None False None False 8497.071 0 3357971 118103 None I-12.97.1 P-112 V-2 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames GF ---- etc., complete with all lead Sqm 4234.41 4234.41 6.3 False None None False None False 26676.783 0 3357972 118103 None I-12.97.1 P-112 V-2 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for forming hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels conforming to IS 14856 Including fixing to frames FF ---- etc., complete with all lead Sqm 4276.75 4276.75 3.15 False None None False None False 13471.7625 0 3357973 118103 None I-8.10 P-112 V-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 278.86 278.86 104.03 False None None False None False 29009.8058 0 3357974 118103 None I-8.10 P-112 V-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 281.65 281.65 118.01 False None None False None False 33237.5165 0 3357975 118103 None I-8.5.2 P-42 V-2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) GF ---- etc., complete with all lead Sqm 461.24 461.24 354.46 False None None False None False 163491.1304 0 3357976 118103 None I-8.5.2 P-42 V-2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (Inside) FF ---- etc., complete with all lead Sqm 465.85 465.85 250.13 False None None False None False 116523.0605 0 3357977 118103 None I-8.51 P-50 V-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GF ---- etc., complete with all lead Sqm 132.16 132.16 441.91 False None None False None False 58402.8256 0 3357978 118103 None I-8.51 P-50 V-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF ---- etc., complete with all lead Sqm 133.48 133.48 368.14 False None None False None False 49139.3272 0 3357979 118103 None I-8.9 P-42 V-2 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Outside) GF ---- etc., complete with all lead Sqm 508.82 508.82 196.14 False None None False None False 99799.9548 0 3357980 118103 None I-8.9 P-42 V-2 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1cement :3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Outside) FF ---- etc., complete with all lead Sqm 513.9 513.9 215.75 False None None False None False 110873.925 0 3357981 118103 None I-8.2.1 P-41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 389.87 389.87 36.98 False None None False None False 14417.3926 0 3357982 118103 None I-8.2.1 P-41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 393.77 393.77 27.87 False None None False None False 10974.3699 0 3357983 118103 None I-8.16.2 P-43 V-2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 150mm wide GF ---- etc., complete with all lead Rmtr 50.22 50.22 830.62 False None None False None False 41713.7364 0 3357984 118103 None I-15.7 P-134 V-2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) GF ---- etc., complete with all lead Sqm 812.78 812.78 12.24 False None None False None False 9948.4272 0 3357985 118103 None I-15.7 P-134 V-2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) FF ---- etc., complete with all lead Sqm 820.91 820.91 8.94 False None None False None False 7338.9354 0 3357986 118103 None I-8.79 P-54 V-2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete with all lead Rmtr 68.72 68.72 238.64 False None None False None False 16399.3408 0 3357987 118103 None I-8.79 P-54 V-2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete with all lead Rmtr 69.41 69.41 160.83 False None None False None False 11163.2103 0 3357988 118103 None I-9.17.2 P-62 V-2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. GF ---- etc., complete with all lead Sqm 1552.88 1552.88 89.09 False None None False None False 138346.0792 0 3357989 118103 None I-9.17.2 P-62 V-2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. FF ---- etc., complete with all lead Sqm 1568.41 1568.41 54.78 False None None False None False 85917.4998 0 3357990 118103 None I-9.23 P-63 V-2 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. GF ---- etc., complete with all lead Sqm 3259.07 3259.07 31.52 False None None False None False 102725.8864 0 3357991 118103 None I-9.23 P-63 V-2 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. FF ---- etc., complete with all lead Sqm 3291.66 3291.66 3.64 False None None False None False 11981.6424 0 3357992 118103 None I-9.11 P-60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. GF ---- etc., complete with all lead Sqm 1174.9 1174.9 5.86 False None None False None False 6884.914 0 3357993 118103 None I-9.11 P-60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF ---- etc., complete with all lead Sqm 1186.65 1186.65 5.98 False None None False None False 7096.167 0 3357994 118103 None I-9.39 P-65 V-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. GF ---- etc., complete with all lead Sqm 1915.0 1915.0 36.98 False None None False None False 70816.7 0 3357995 118103 None I-9.39 P-65 V-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead Sqm 1934.15 1934.15 27.87 False None None False None False 53904.7605 0 3357996 118103 None I-9.14 P-61 V-2 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. GF ---- etc., complete with all lead Sqm 466.52 466.52 42.84 False None None False None False 19985.7168 0 3357997 118103 None I-9.14 P-61 V-2 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. FF ---- etc., complete with all lead Sqm 471.19 471.19 33.85 False None None False None False 15949.7815 0 3357998 118103 None I-11.16.1 P-82 V-2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GF ---- etc., complete with all lead Kg 179.74 179.74 259.2 False None None False None False 46588.608 0 3357999 118103 None I-8.39 P-48 V-2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 167.84 167.84 441.91 False None None False None False 74170.1744 0 3358000 118103 None I-8.39 P-48 V-2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 169.52 169.52 250.13 False None None False None False 42402.0376 0 3358001 118103 None I-8.32 P-45 V-2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 206.17 206.17 196.14 False None None False None False 40438.1838 0 3358002 118103 None I-8.32 P-45 V-2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 208.23 208.23 215.75 False None None False None False 44925.6225 0 3358003 118103 None I-8.34.3 P-47 V-2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 66.08 66.08 12.42 False None None False None False 820.7136 0 3358004 118103 None I-8.34.3 P-47 V-2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 66.74 66.74 11.07 False None None False None False 738.8118 0 3358005 118103 None I-8.40 P-48 V-2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 151.98 151.98 12.42 False None None False None False 1887.5916 0 3358006 118103 None I-8.40 P-48 V-2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 153.5 153.5 11.07 False None None False None False 1699.245 0 3358007 118103 None I-8.34.1 P-47 V-2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 70.04 70.04 35.71 False None None False None False 2501.1284 0 3358008 118103 None I-8.34.1 P-47 V-2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 70.75 70.75 21.89 False None None False None False 1548.7175 0 3358009 118103 None I-8.47 P-49 V-2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete with all lead Sqm 178.42 178.42 35.71 False None None False None False 6371.3782 0 3358010 118103 None I-8.47 P-49 V-2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead Sqm 180.2 180.2 21.89 False None None False None False 3944.578 0 3358011 118103 None I-7.18 P-23 V-2 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. FF ---- etc., complete with all lead Cum 2692.32 2692.32 1.2 False None None False None False 3230.784 0 3358012 118103 None V-1,It no 2.2.1 SR2023-24 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesall materials, labour, HOM of machinery, curing complete as per specifications ---- etc., complete with all lead Cum 8558.17 8558.17 1.6 False None None False None False 13693.072 0 3358013 118103 None V-1,It no 2.3.2 SR2023-24 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9420.36 9420.36 5.0 False None None False None False 47101.8 0 3358014 118103 None V-2,It no 8.8 SR2023-24 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 490.31 490.31 3.5 False None None False None False 1716.085 0 3358015 118103 None V-1,It no 1.9 SR 2023-24 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 0cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 351.55 351.55 3.6 False None None False None False 1265.58 0 1719380394000 0 None None Buildings Water Supply Works Kanamaski Slice-12 373823.59 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3358016 118104 None I-14.28.2.2 P-28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines GF ---- etc., complete with all lead Each 121.59 121.59 10.0 False None None False None False 1215.9 0 3358017 118104 None I-14.28.2.2 P-28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines FF ---- etc., complete with all lead Each 122.8 122.8 10.0 False None None False None False 1228.0 0 3358018 118104 None I-16.7.4 P-191 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, GF ---- etc., complete with all lead m 183.7 183.7 10.0 False None None False None False 1837.0 0 3358019 118104 None I-16.7.3 P-191 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes, FF ---- etc., complete with all lead m 185.54 185.54 10.0 False None None False None False 1855.4 0 3358020 118104 None I-657 P-A44 V-5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines GF ---- etc., complete with all lead m 162.56 162.56 80.0 False None None False None False 13004.8 0 3358021 118104 None I-657 P-A44 V-5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines FF ---- etc., complete with all lead m 164.18 164.18 20.0 False None None False None False 3283.6 0 3358022 118104 None I-647 P-A44 V-5 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines GF ---- etc., complete with all lead m 337.01 337.01 50.0 False None None False None False 16850.5 0 3358023 118104 None I-647 P-A44 V-5 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines FF ---- etc., complete with all lead m 340.38 340.38 30.0 False None None False None False 10211.4 0 3358024 118104 None I-13.47 P-125 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter GF ---- etc., complete with all lead m 260.36 260.36 20.0 False None None False None False 5207.2 0 3358025 118104 None I-13.48 P-125 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter GF ---- etc., complete with all lead m 384.59 384.59 25.0 False None None False None False 9614.75 0 3358026 118104 None I-14.31 P-128 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. GF ---- etc., complete with all lead No 1612.35 1612.35 3.0 False None None False None False 4837.05 0 3358027 118104 None I-14.31 P-128 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. FF ---- etc., complete with all lead No 1628.48 1628.48 2.0 False None None False None False 3256.96 0 3358028 118104 None I-13.9.2 P-118 V-2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter GF ---- etc., complete with all lead No 368.73 368.73 1.0 False None None False None False 368.73 0 3358029 118104 None I-13.9.2 P-118 V-2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter FF ---- etc., complete with all lead No 372.41 372.41 2.0 False None None False None False 744.82 0 3358030 118104 None I-14.22B P-127 V-2 Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. GF ---- etc., complete with all lead No 7350.74 7350.74 1.0 False None None False None False 7350.74 0 3358031 118104 None I-14.22B P-127 V-2 Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. FF ---- etc., complete with all lead No 7424.25 7424.25 2.0 False None None False None False 14848.5 0 3358032 118104 None I-14.40.2 P-130 V-2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. GF ---- etc., complete with all lead No 655.51 655.51 3.0 False None None False None False 1966.53 0 3358033 118104 None I-14.40.2 P-130 V-2 Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. FF ---- etc., complete with all lead No 662.07 662.07 2.0 False None None False None False 1324.14 0 3358034 118104 None I-14.3.1 P-131 V-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid GF ---- etc., complete with all lead No 7899.2 7899.2 1.0 False None None False None False 7899.2 0 3358035 118104 None I-14.3.1 P-131 V-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinamflushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid FF ---- etc., complete with all lead No 7978.2 7978.2 1.0 False None None False None False 7978.2 0 3358036 118104 None I-20.44.2 P-178 V-2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm GF ---- etc., complete with all lead Each 4687.72 4687.72 1.0 False None None False None False 4687.72 0 3358037 118104 None I-20.44.2 P-178 V-2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm FF ---- etc., complete with all lead Each 4734.59 4734.59 1.0 False None None False None False 4734.59 0 3358038 118104 None I-14.4.1 P-124 V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern GF ---- etc., complete with all lead No 5886.41 5886.41 1.0 False None None False None False 5886.41 0 3358039 118104 None I-14.4.1 P-124 V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern FF ---- etc., complete with all lead No 5945.27 5945.27 1.0 False None None False None False 5945.27 0 3358040 118104 None I-14.11.2 P-126 V-2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm GF ---- etc., complete with all lead No 6716.37 6716.37 1.0 False None None False None False 6716.37 0 3358041 118104 None I-166 P-A16 V-2 Providing and fixing C.P. Brass stop cock (concealed) 15 mm GF ---- etc., complete with all lead No 693.84 693.84 2.0 False None None False None False 1387.68 0 3358042 118104 None I-166 P-A16 V-2 Providing and fixing C.P. Brass stop cock (concealed) 15 mm FF ---- etc., complete with all lead No 700.78 700.78 2.0 False None None False None False 1401.56 0 3358043 118104 None I-14.7.1 P-124 V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps GF ---- etc., complete with all lead No 4073.17 4073.17 3.0 False None None False None False 12219.51 0 3358044 118104 None I-14.7.1 P-124 V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps FF ---- etc., complete with all lead No 4113.9 4113.9 2.0 False None None False None False 8227.8 0 3358045 118104 None I-13.32.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes GF ---- etc., complete with all lead m 408.37 408.37 10.0 False None None False None False 4083.7 0 3358046 118104 None I-13.32.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes FF ---- etc., complete with all lead m 412.46 412.46 15.0 False None None False None False 6186.9 0 3358047 118104 None I-13.32.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes GF ---- etc., complete with all lead m 500.89 500.89 25.0 False None None False None False 12522.25 0 3358048 118104 None I-13.32.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes FF ---- etc., complete with all lead m 505.9 505.9 50.0 False None None False None False 25295.0 0 3358049 118104 None I-13.32.3 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes FF ---- etc., complete with all lead m 636.71 636.71 20.0 False None None False None False 12734.2 0 3358050 118104 None I-13.33.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 15 mm nominal dia Pipes GF ---- etc., complete with all lead m 219.39 219.39 10.0 False None None False None False 2193.9 0 3358051 118104 None I-13.33.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes GF ---- etc., complete with all lead m 286.79 286.79 20.0 False None None False None False 5735.8 0 3358052 118104 None I-13.33.5 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes GF ---- etc., complete with all lead m 630.4 630.4 50.0 False None None False None False 31520.0 0 3358053 118104 None I-86 P-A14 V-2 Providing and fixing Brass bib-cock 15 mm dia GF ---- etc., complete with all lead Each 211.46 211.46 3.0 False None None False None False 634.38 0 3358054 118104 None I-86 P-A14 V-2 Providing and fixing Brass bib-cock 15 mm dia FF ---- etc., complete with all lead Each 213.57 213.57 2.0 False None None False None False 427.14 0 3358055 118104 None I-14.10.1.4 P-126 V-2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead Nos 6449.83 6449.83 1.0 False None None False None False 6449.83 0 3358056 118104 None I-1.5.1 P-6 V-1 Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 302.65 302.65 34.0 False None None False None False 10290.1 0 3358057 118104 None I-1.9 P-7 V-1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 351.55 351.55 34.0 False None None False None False 11952.7 0 3358058 118104 None I-10.2.4 P-113 V-5 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:( For external Sanitary Work ). Pipes of SN4, 160mm dia. ---- etc., complete with all lead m 761.24 761.24 50.0 False None None False None False 38062.0 0 3358059 118104 None I-16.9 P-191 V-5 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(INSPECTION CHAMBER) ---- etc., complete with all lead No 7208.01 7208.01 5.0 False None None False None False 36040.05 0 3358060 118104 None I-13.58 P-127 V-2 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead No 457.27 457.27 4.0 False None None False None False 1829.08 0 3358061 118104 None I-13.23.5 P-121 V-2 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead No 1776.23 1776.23 1.0 False None None False None False 1776.23 0 1719380394000 0 None None Buildings Electrical works Kanamaski Slice -13 464288.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3358062 118105 None 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 317.42 317.42 25.0 False None None False None False 7935.5 0 3358063 118105 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 447.22 447.22 20.0 False None None False None False 8944.4 0 3358064 118105 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 15.0 False None None False None False 9823.5 0 3358065 118105 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead Each 187.62 187.62 21.0 False None None False None False 3940.02 0 3358066 118105 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead Each 208.86 208.86 6.0 False None None False None False 1253.16 0 3358067 118105 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead Each 259.6 259.6 2.0 False None None False None False 519.2 0 3358068 118105 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 307.98 307.98 13.0 False None None False None False 4003.74 0 3358069 118105 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead Each 376.42 376.42 4.0 False None None False None False 1505.68 0 3358070 118105 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3Module ---- etc., complete with all lead Each 189.98 189.98 21.0 False None None False None False 3989.58 0 3358071 118105 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4-5Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3358072 118105 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3358073 118105 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3358074 118105 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3358075 118105 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3358076 118105 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3358077 118105 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 37.0 False None None False None False 7465.86 0 3358078 118105 None 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3358079 118105 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3358080 118105 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead Each 384.68 384.68 11.0 False None None False None False 4231.48 0 3358081 118105 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3358082 118105 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3358083 118105 None 12.2.1 Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Dong Bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3358084 118105 None I-1.13 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3358085 118105 None 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 320.0 False None None False None False 24921.6 0 3358086 118105 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 300.0 False None None False None False 27612.0 0 3358087 118105 None 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 110.0 False None None False None False 8826.4 0 3358088 118105 None 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 95.0 False None None False None False 8855.9 0 3358089 118105 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead m 30.68 30.68 125.0 False None None False None False 3835.0 0 3358090 118105 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead m 49.56 49.56 450.0 False None None False None False 22302.0 0 3358091 118105 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead m 74.34 74.34 380.0 False None None False None False 28249.2 0 3358092 118105 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II- Double Door 12 Way SP & N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3358093 118105 None 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3358094 118105 None 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead Each 2992.48 2992.48 2.0 False None None False None False 5984.96 0 3358095 118105 None I-32.03 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 10 sqmm ---- etc., complete with all lead Km 175362.16 175362.16 0.1 False None None False None False 17536.216 0 3358096 118105 None I-31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead Km 19067.62 19067.62 0.1 False None None False None False 1906.762 0 3358097 118105 None SR 19-20 - 6.6.2 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard) ---- etc., complete with all lead m 120.36 120.36 20.0 False None None False None False 2407.2 0 3358098 118105 None SR 19-20- 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm ---- etc., complete with all lead m 395.3 395.3 5.0 False None None False None False 1976.5 0 3358099 118105 None I-12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3358100 118105 None SR 19-20- 6.18 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG-GI Wire ---- etc., complete with all lead m 22.42 22.42 5.0 False None None False None False 112.1 0 3358101 118105 None 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 96.76 96.76 50.0 False None None False None False 4838.0 0 3358102 118105 None 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead Each 814.2 814.2 25.0 False None None False None False 20355.0 0 3358103 118105 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ---- etc., complete with all lead Each 1044.3 1044.3 2.0 False None None False None False 2088.6 0 3358104 118105 None 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3358105 118105 None 11.11.7 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18 W, 6500K ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3358106 118105 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete with all lead No 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3358107 118105 None I-12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead No 61.36 61.36 2.0 False None None False None False 122.72 0 3358108 118105 None I-6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3358109 118105 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3358110 118105 None I-12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead Each 74.34 74.34 19.0 False None None False None False 1412.46 0 3358111 118105 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3358112 118105 None I-13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete with all lead Each 371.7 371.7 12.0 False None None False None False 4460.4 0 3358113 118105 None I-13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3358114 118105 None 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3358115 118105 None I-13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3358116 118105 None 7.1.3 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 25Litres ---- etc., complete with all lead Each 12085.56 12085.56 1.0 False None None False None False 12085.56 0 3358117 118105 None 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.51 0.51 48000.0 False None None False None False 24480.0 0 3358118 118105 None 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3358119 118105 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead m 359.9 359.9 3.0 False None None False None False 1079.7 0 3358120 118105 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 892.08 892.08 3.0 False None None False None False 2676.24 0 3358121 118105 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 100Amps 25kA ---- etc., complete with all lead Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3358122 118105 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3358123 118105 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3358124 118105 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3358125 118105 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3358126 118105 None 5.12.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3358127 118105 None I-5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3358128 118105 None I-5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3358129 118105 None I-5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3358130 118105 None I-5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3358131 118105 None I-5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3358132 118105 None I-5.30 Supplying, fixing and wiring electronic 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719380395000 1 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719380395000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719380395000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Karnataka public Procurement on or before the last date and time of bid submission. None 1719380395000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719380395000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719381474000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1719381490000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1719381503000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1719381586000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1719381597000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1719381606000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1719381614000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1719381622000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected None 1719381634000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender None 1719381644000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1719381653000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1719381663000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution None 1719381676000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time None 1719381685000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None 1719381695000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work None 1719381705000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1719381713000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST None 1719381722000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document None 1719381732000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work None 1719381744000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2023-24 & 2024-25 None 1719381756000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least one Similar work of value not less than Rs.97.30 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation -845.00 Cum,2)RCC and PCC-331.00 Cum 3)Steel Reinforcement for RCC work-23.00 Tonnes 4)Cement Concrete Block Masonry/Solid Block Masonry /Load Bearing Wall/Laterite/-1015.00 Sqm 5)Flooring/Dadooing (Vitrified/Granite/ Ceramic/Cement concrete/cladding/ dadooing)-614.00.00 Sqm,6)Plastering 3137.00 Sqm,7)Painting-2965.00 Sqm (8)MS grill- 1100.00 Kgs,9)WPC-25.00sqm.Note-TheWorkdonecertificateshouldbeissued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/autonomous bodies of Government will be considered for the clause 3.2 (c). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.7.00 Lakhs in any one year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the e-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.6.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the e-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity 1 Min 10 cft capacity Concrete Mixer-2 Nos.2. Centering sheets-300 sqmtr. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Tax Invoice/Agreements from the supplier None None None None KPWD Class-III & above Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Registration certificate issued by competent authority None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 One 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working inpermanent role of the organization for at least two years 1 One. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.389.00 Lakhs. Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.59.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 updated to 2024-25 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2024-25 price level of existing commitments and ongoing works to be completed during the next 6 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- existing commitments and ongoing works list
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate and balance sheet issued by charted accountant False Technical Bid Registration Certificate class III & above False Technical Bid GST certificate and latest paid receipt False Technical Bid ESI and PF certificate and latest paid receipt False Technical Bid Workdone certificate issued by the officer not below the rank of EE True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Uttara Kannada None None None Hitlamakki in kumta Taluk None None None None None None Buildings None None None None Hitlamakki in Kumta Taluk None None None None None None Buildings None None None None Hitlamakki in Kumta Taluk None None None None None None Buildings None None None None Hitlmakki in Kumta Taluk None None None None None None Buildings None None None None Hitlamakki in Kumta Taluk None None None None None None Buildings None None None None Hitlamakki in Kumta Taluk None None None None None None Buildings None None None None Hitlamakki in Kumta Taluk None None None None None None Buildings None None None None Koliokere in Yallapur Talul None None None None None None Buildings None None None None Koliokere in Yallapur Talul None None None None None None Buildings None None None None Koliokere in Yallapur Talul None None None None None None Buildings None None None None Kanamaski in Sirsi Taluk None None None None None None Buildings None None None None Kanamaski in Sirsi Taluk None None None None None None Buildings None None None None Kanamaski in Sirsi Taluk None None None None None None
tenderAddress	createdTs 1719385819000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, Arogya Soudha, 3rd floor, Leprosy Hospital premises, 1st cross, Magadi Road, Bengaluru-560023 street None city Bengalruu state Karnataka pin 560023
tenderRecallDTO	None