| 1719413448000 | 0 | None | None | Buildings | Construction of toilet in Town Panchayat office for Specialy challenged persons of Kadakola TP limits | 196872.41 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3371980 | 118670 | None | ITEM1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost
of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. (Page No- 6, Item No-1.5.1, Vol-1, SR-2023-24) | Cum | 307.97 | 307.97 | 3.55 | False | None | None | False | None | False | 1093.2935 | 0 | | 3371981 | 118670 | None | ITEM2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates.(Page No- 15, Item No-2.1.5, Vol-1, SR-2023-24) | Cum | 6340.68 | 6340.68 | 1.13 | False | None | None | False | None | False | 7164.9684 | 0 | | 3371982 | 118670 | None | ITEM3 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6.(Page No-9, Item No-5.5, Vol-2, SR-2023-24) | Cum | 6565.22 | 6565.22 | 1.97 | False | None | None | False | None | False | 12933.4834 | 0 | | 3371983 | 118670 | None | ITEM4 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6.(Page No-9, Item No-5.6, Vol-2, SR-2023-24) | Cum | 6641.44 | 6641.44 | 0.74 | False | None | None | False | None | False | 4914.6656 | 0 | | 3371984 | 118670 | None | ITEM5 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the
work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates.(Page No- 15, Item No-2.1.6, Vol-1, SR-2023-24) | Cum | 8359.38 | 8359.38 | 0.66 | False | None | None | False | None | False | 5517.1908 | 0 | | 3371985 | 118670 | None | ITEM6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Page No- 7, Item No-1.9, Vol-1, SR-2023-24) | Cum | 273.98 | 273.98 | 1.15 | False | None | None | False | None | False | 315.077 | 0 | | 3371986 | 118670 | None | ITEM7 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No- 17, Item No-6.33, Vol-2, SR-2023-24) | Sqm | 1267.93 | 1267.93 | 24.26 | False | None | None | False | None | False | 30759.9818 | 0 | | 3371987 | 118670 | None | ITEM8 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (Page No- 16, Item No-2.5.1, Vol-1, SR-2023-24) | Cum | 10243.35 | 10243.35 | 1.08 | False | None | None | False | None | False | 11062.818 | 0 | | 3371988 | 118670 | None | ITEM9 | Steel Fabrication--Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (Page No-18 , Item No-2.11a, Vol-1, SR-2023-24) | Tonne | 92140.71 | 92140.71 | 0.129 | False | None | None | False | None | False | 11886.15159 | 0 | | 3371989 | 118670 | None | ITEM10 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal
braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.(Page No- 77, Item No-11.5.1, Vol-2, SR-2023-24) | Sqm | 4612.34 | 4612.34 | 1.58 | False | None | None | False | None | False | 7287.4972 | 0 | | 3371990 | 118670 | None | ITEM11 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No- 41, Item No-8.4.1, Vol-2, SR-2023-24) | Sqm | 332.69 | 332.69 | 2.88 | False | None | None | False | None | False | 958.1472 | 0 | | 3371991 | 118670 | None | ITEM12 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No- 42, Item No-8.5.1, Vol-2, SR-2023-24) | Sqm | 376.98 | 376.98 | 26.87 | False | None | None | False | None | False | 10129.4526 | 0 | | 3371992 | 118670 | None | ITEM13 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No- 42, Item No-8.9, Vol-2, SR-2023-24) | Sqm | 396.55 | 396.55 | 30.33 | False | None | None | False | None | False | 12027.3615 | 0 | | 3371993 | 118670 | None | ITEM14 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge.(Page No- 59, Item No-9.2, Vol-2, SR-2023-24) | Sqm | 824.0 | 824.0 | 2.97 | False | None | None | False | None | False | 2447.28 | 0 | | 3371994 | 118670 | None | ITEM15 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge.(Page No- 59, Item No-9.4, Vol-2, SR-2023-24) | Cum | 6865.98 | 6865.98 | 0.11 | False | None | None | False | None | False | 755.2578 | 0 | | 3371995 | 118670 | None | ITEM16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.(Page No-60, Item No-9.10, Vol-2, SR-2023-24) | Sqm | 1139.18 | 1139.18 | 2.88 | False | None | None | False | None | False | 3280.8384 | 0 | | 3371996 | 118670 | None | ITEM17 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(Page No- 65, Item No-9.38, Vol-2, SR-2023-24) | Sqm | 1433.76 | 1433.76 | 5.31 | False | None | None | False | None | False | 7613.2656 | 0 | | 3371997 | 118670 | None | ITEM18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.(Page No- 86, Item No-11.34A, Vol-2, SR-2023-24) | Kg | 173.04 | 173.04 | 15.12 | False | None | None | False | None | False | 2616.3648 | 0 | | 3371998 | 118670 | None | ITEM19 | Providing White washing with lime to give an even shade New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Page No- 44, Item No-8.21, Vol-2, SR-2023-24) | Sqm | 26.79 | 26.79 | 24.44 | False | None | None | False | None | False | 654.7476 | 0 | | 3371999 | 118670 | None | ITEM20 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life).(Page No- 46, Item No-8.33.1, Vol-2, SR-2023-24) | Sqm | 162.74 | 162.74 | 24.44 | False | None | None | False | None | False | 3977.3656 | 0 | | 3372000 | 118670 | None | ITEM21 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No- 46, Item No-8.31, Vol-2, SR-2023-24) | Sqm | 183.34 | 183.34 | 30.33 | False | None | None | False | None | False | 5560.7022 | 0 | | 3372001 | 118670 | None | ITEM22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No- 48, Item No-8.41, Vol-2, SR-2023-24) | Sqm | 172.01 | 172.01 | 8.17 | False | None | None | False | None | False | 1405.3217 | 0 | | 3372002 | 118670 | None | ITEM23 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.(Page No- 131, Item No-14.1.1, Vol-2, SR-2023-24) | Each | 5030.52 | 5030.52 | 2.0 | False | None | None | False | None | False | 10061.04 | 0 | | 3372003 | 118670 | None | ITEM24 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5(Page No- 126, Item No-13.53,Vol-2, SR-2023-24) | Each | 5811.26 | 5811.26 | 1.0 | False | None | None | False | None | False | 5811.26 | 0 | | 3372004 | 118670 | None | ITEM25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia pipes.(Page No- 122, Item No-13.32.3,Vol-2, SR-2023-24) | Mtr | 491.31 | 491.31 | 15.0 | False | None | None | False | None | False | 7369.65 | 0 | | 3372005 | 118670 | None | ITEM26 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.100 mm nominal dia Pipes.(Page No- 125, Item No-13.50.9,Vol-2, SR-2023-24) | Mtr | 957.9 | 957.9 | 10.0 | False | None | None | False | None | False | 9579.0 | 0 | | 3372006 | 118670 | None | ITEM27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Page No- 123, Item No-13.34,Vol-2, SR-2023-24) | Ltr | 9.45 | 9.45 | 500.0 | False | None | None | False | None | False | 4725.0 | 0 | | 3372007 | 118670 | None | ITEM28 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.(Page No- 117, Item No-13.4.1, Vol-2, SR-2023-24) | No | 594.31 | 594.31 | 2.0 | False | None | None | False | None | False | 1188.62 | 0 | | 3372008 | 118670 | None | ITEM29 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore.(Page No- 117, Item No-13.2.2, Vol-2, SR-2023-24) | No | 314.15 | 314.15 | 2.0 | False | None | None | False | None | False | 628.3 | 0 | | 3372009 | 118670 | None | ITEM30 | Providing and fixing brass stop cock of approved quality:20 mm nominal bore .(Page No- 117, Item No-13.3.2, Vol-2, SR-2023-24) | No | 314.15 | 314.15 | 2.0 | False | None | None | False | None | False | 628.3 | 0 | | 3372010 | 118670 | None | ITEM31 | Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary | Mtr | 103.0 | 103.0 | 15.0 | False | None | None | False | None | False | 1545.0 | 0 | | 3372011 | 118670 | None | ITEM32 | Supplying and fixing PVC/metal conduit accessories.deep junction box | Each | 56.0 | 56.0 | 4.0 | False | None | None | False | None | False | 224.0 | 0 | | 3372012 | 118670 | None | ITEM33 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. | Each | 261.0 | 261.0 | 1.0 | False | None | None | False | None | False | 261.0 | 0 | | 3372013 | 118670 | None | ITEM34 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall | Each | 344.0 | 344.0 | 1.0 | False | None | None | False | None | False | 344.0 | 0 | | 3372014 | 118670 | None | ITEM35 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | Each | 102.0 | 102.0 | 4.0 | False | None | None | False | None | False | 408.0 | 0 | | 3372015 | 118670 | None | ITEM36 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch | Each | 326.0 | 326.0 | 1.0 | False | None | None | False | None | False | 326.0 | 0 | | 3372016 | 118670 | None | ITEM37 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universaal Socket | Each | 236.0 | 236.0 | 2.0 | False | None | None | False | None | False | 472.0 | 0 | | 3372017 | 118670 | None | ITEM38 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point | Point | 269.0 | 269.0 | 4.0 | False | None | None | False | None | False | 1076.0 | 0 | | 3372018 | 118670 | None | ITEM39 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium Point | Point | 379.0 | 379.0 | 4.0 | False | None | None | False | None | False | 1516.0 | 0 | | 3372019 | 118670 | None | ITEM40 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point | Point | 555.0 | 555.0 | 4.0 | False | None | None | False | None | False | 2220.0 | 0 | | 3372020 | 118670 | None | ITEM41 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 mm 2 | Mtr | 19.0 | 19.0 | 20.0 | False | None | None | False | None | False | 380.0 | 0 | | 3372021 | 118670 | None | ITEM42 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm 2 | Mtr | 26.0 | 26.0 | 20.0 | False | None | None | False | None | False | 520.0 | 0 | | 3372022 | 118670 | None | ITEM43 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm 2 | Mtr | 42.0 | 42.0 | 15.0 | False | None | None | False | None | False | 630.0 | 0 | | 3372023 | 118670 | None | ITEM44 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4.0 mm 2 | Mtr | 63.0 | 63.0 | 15.0 | False | None | None | False | None | False | 945.0 | 0 | | 3372024 | 118670 | None | ITEM45 | Supplying of .feet -PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. | Each | 551.0 | 551.0 | 3.0 | False | None | None | False | None | False | 1653.0 | 0 |
|