createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719407529632 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 871000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 11-07-2024 16:00:00 tenderQueryClose 02-07-2024 11:30:00 technicalBidOpen 12-07-2024 16:30:00 publishedDate 26-06-2024 19:11:30 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 03-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Gnanesh Kumar V P splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843360 tenderSupplierList None
tenderSchedule	createdTs 1719407529662 version 8 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT486 title Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, 2)t Avaragolla in Davanagere Taluk, . 3) Hulikatte in Davanagere Taluk, 4)Hale Kundadavada in Davanagere Taluk, 5) Kukkawada in Davanagere Taluk, 6)Kabbala in Channigiri Taluk,. 7)Kodagikere in Channigiri Taluk,8) Kunkava in Honalli Taluk, . 9)Kadaji in Davanagere Taluk, Davanagere District. description Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, 2)t Avaragolla in Davanagere Taluk, . 3) Hulikatte in Davanagere Taluk, 4)Hale Kundadavada in Davanagere Taluk, 5) Kukkawada in Davanagere Taluk, 6)Kabbala in Channigiri Taluk,. 7)Kodagikere in Channigiri Taluk,8) Kunkava in Honalli Taluk, . 9)Kadaji in Davanagere Taluk, Davanagere District. category WORKS categoryText Works ecv 58038600.87 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 58500000.0 groupOverheadTotal 0.0 fileNumber PackageDVG
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davangere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369568 118550 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3369569 118550 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3369570 118550 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3369571 118550 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3369572 118550 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3369573 118550 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3369574 118550 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3369575 118550 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3369576 118550 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3369577 118550 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3369578 118550 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3369579 118550 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3369580 118550 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3369581 118550 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3369582 118550 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3369583 118550 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3369584 118550 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3369585 118550 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3369586 118550 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3369587 118550 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3369588 118550 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3369589 118550 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3369590 118550 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3369591 118550 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3369592 118550 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3369593 118550 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3369594 118550 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3369595 118550 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3369596 118550 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3369597 118550 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3369598 118550 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3369599 118550 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3369600 118550 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3369601 118550 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3369602 118550 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3369603 118550 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3369604 118550 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3369605 118550 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3369606 118550 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3369607 118550 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3369608 118550 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3369609 118550 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3369610 118550 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3369611 118550 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3369612 118550 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3369613 118550 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3369614 118550 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davangere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369615 118551 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3369616 118551 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3369617 118551 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3369618 118551 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3369619 118551 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3369620 118551 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3369621 118551 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3369622 118551 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3369623 118551 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3369624 118551 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3369625 118551 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3369626 118551 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3369627 118551 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3369628 118551 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3369629 118551 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3369630 118551 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3369631 118551 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3369632 118551 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3369633 118551 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3369634 118551 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3369635 118551 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3369636 118551 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3369637 118551 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3369638 118551 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3369639 118551 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3369640 118551 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3369641 118551 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3369642 118551 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3369643 118551 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3369644 118551 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3369645 118551 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3369646 118551 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3369647 118551 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3369648 118551 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3369649 118551 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3369650 118551 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3369651 118551 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3369652 118551 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davangere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369653 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3369654 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3369655 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3369656 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3369657 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3369658 118552 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3369659 118552 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3369660 118552 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3369661 118552 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3369662 118552 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3369663 118552 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3369664 118552 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3369665 118552 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3369666 118552 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3369667 118552 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3369668 118552 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3369669 118552 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3369670 118552 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3369671 118552 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davangere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369672 118553 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3369673 118553 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3369674 118553 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3369675 118553 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3369676 118553 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3369677 118553 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3369678 118553 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3369679 118553 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3369680 118553 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3369681 118553 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3369682 118553 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3369683 118553 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3369684 118553 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3369685 118553 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3369686 118553 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3369687 118553 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3369688 118553 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3369689 118553 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3369690 118553 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3369691 118553 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3369692 118553 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3369693 118553 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3369694 118553 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3369695 118553 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3369696 118553 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3369697 118553 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3369698 118553 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3369699 118553 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3369700 118553 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3369701 118553 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3369702 118553 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3369703 118553 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davanagere District. Water Supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369704 118554 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3369705 118554 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3369706 118554 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3369707 118554 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3369708 118554 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3369709 118554 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3369710 118554 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3369711 118554 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3369712 118554 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3369713 118554 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3369714 118554 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3369715 118554 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3369716 118554 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3369717 118554 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3369718 118554 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3369719 118554 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3369720 118554 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3369721 118554 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3369722 118554 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3369723 118554 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369724 118555 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3369725 118555 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3369726 118555 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3369727 118555 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3369728 118555 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3369729 118555 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3369730 118555 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3369731 118555 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3369732 118555 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3369733 118555 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3369734 118555 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3369735 118555 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3369736 118555 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3369737 118555 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3369738 118555 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3369739 118555 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3369740 118555 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3369741 118555 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3369742 118555 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3369743 118555 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3369744 118555 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3369745 118555 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3369746 118555 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3369747 118555 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3369748 118555 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3369749 118555 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3369750 118555 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3369751 118555 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3369752 118555 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3369753 118555 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3369754 118555 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3369755 118555 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3369756 118555 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3369757 118555 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3369758 118555 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3369759 118555 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3369760 118555 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3369761 118555 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3369762 118555 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3369763 118555 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3369764 118555 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3369765 118555 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3369766 118555 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3369767 118555 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3369768 118555 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3369769 118555 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3369770 118555 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3369771 118555 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3369772 118555 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3369773 118555 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3369774 118555 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3369775 118555 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3369776 118555 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3369777 118555 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3369778 118555 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3369779 118555 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3369780 118555 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3369781 118555 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3369782 118555 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3369783 118555 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3369784 118555 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3369785 118555 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3369786 118555 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Kandanakovi in Davanagere Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369787 118556 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3369788 118556 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3369789 118556 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3369790 118556 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3369791 118556 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369792 118557 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3369793 118557 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3369794 118557 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3369795 118557 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3369796 118557 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3369797 118557 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3369798 118557 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3369799 118557 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3369800 118557 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3369801 118557 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3369802 118557 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3369803 118557 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3369804 118557 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3369805 118557 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3369806 118557 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3369807 118557 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3369808 118557 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3369809 118557 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3369810 118557 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3369811 118557 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3369812 118557 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3369813 118557 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3369814 118557 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3369815 118557 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3369816 118557 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3369817 118557 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3369818 118557 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3369819 118557 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3369820 118557 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3369821 118557 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3369822 118557 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3369823 118557 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3369824 118557 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3369825 118557 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3369826 118557 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3369827 118557 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3369828 118557 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3369829 118557 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3369830 118557 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3369831 118557 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3369832 118557 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3369833 118557 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3369834 118557 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3369835 118557 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3369836 118557 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3369837 118557 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3369838 118557 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369839 118558 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3369840 118558 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3369841 118558 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3369842 118558 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3369843 118558 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3369844 118558 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3369845 118558 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3369846 118558 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3369847 118558 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3369848 118558 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3369849 118558 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3369850 118558 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3369851 118558 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3369852 118558 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3369853 118558 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3369854 118558 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3369855 118558 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3369856 118558 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3369857 118558 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3369858 118558 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3369859 118558 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3369860 118558 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3369861 118558 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3369862 118558 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3369863 118558 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3369864 118558 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3369865 118558 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3369866 118558 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3369867 118558 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3369868 118558 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3369869 118558 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3369870 118558 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3369871 118558 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3369872 118558 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3369873 118558 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3369874 118558 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3369875 118558 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3369876 118558 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369877 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3369878 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3369879 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3369880 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3369881 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3369882 118559 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3369883 118559 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3369884 118559 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3369885 118559 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3369886 118559 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3369887 118559 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3369888 118559 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3369889 118559 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3369890 118559 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3369891 118559 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3369892 118559 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3369893 118559 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3369894 118559 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3369895 118559 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369896 118560 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3369897 118560 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3369898 118560 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3369899 118560 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3369900 118560 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3369901 118560 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3369902 118560 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3369903 118560 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3369904 118560 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3369905 118560 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3369906 118560 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3369907 118560 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3369908 118560 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3369909 118560 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3369910 118560 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3369911 118560 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3369912 118560 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3369913 118560 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3369914 118560 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3369915 118560 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3369916 118560 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3369917 118560 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3369918 118560 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3369919 118560 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3369920 118560 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3369921 118560 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3369922 118560 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3369923 118560 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3369924 118560 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3369925 118560 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3369926 118560 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3369927 118560 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369928 118561 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3369929 118561 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3369930 118561 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3369931 118561 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3369932 118561 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3369933 118561 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3369934 118561 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3369935 118561 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3369936 118561 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3369937 118561 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3369938 118561 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3369939 118561 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3369940 118561 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3369941 118561 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3369942 118561 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3369943 118561 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3369944 118561 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3369945 118561 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3369946 118561 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3369947 118561 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3369948 118562 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3369949 118562 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3369950 118562 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3369951 118562 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3369952 118562 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3369953 118562 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3369954 118562 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3369955 118562 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3369956 118562 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3369957 118562 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3369958 118562 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3369959 118562 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3369960 118562 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3369961 118562 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3369962 118562 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3369963 118562 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3369964 118562 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3369965 118562 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3369966 118562 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3369967 118562 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3369968 118562 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3369969 118562 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3369970 118562 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3369971 118562 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3369972 118562 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3369973 118562 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3369974 118562 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3369975 118562 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3369976 118562 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3369977 118562 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3369978 118562 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3369979 118562 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3369980 118562 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3369981 118562 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3369982 118562 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3369983 118562 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3369984 118562 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3369985 118562 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3369986 118562 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3369987 118562 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3369988 118562 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3369989 118562 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3369990 118562 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3369991 118562 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3369992 118562 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3369993 118562 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3369994 118562 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3369995 118562 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3369996 118562 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3369997 118562 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3369998 118562 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3369999 118562 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3370000 118562 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3370001 118562 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3370002 118562 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3370003 118562 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3370004 118562 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3370005 118562 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3370006 118562 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3370007 118562 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3370008 118562 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3370009 118562 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3370010 118562 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Avaragolla in Davanagere Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370011 118563 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3370012 118563 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3370013 118563 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3370014 118563 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3370015 118563 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370016 118564 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3370017 118564 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3370018 118564 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3370019 118564 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3370020 118564 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3370021 118564 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3370022 118564 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3370023 118564 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3370024 118564 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3370025 118564 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3370026 118564 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3370027 118564 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3370028 118564 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3370029 118564 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3370030 118564 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3370031 118564 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3370032 118564 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3370033 118564 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3370034 118564 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3370035 118564 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3370036 118564 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3370037 118564 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3370038 118564 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3370039 118564 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3370040 118564 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3370041 118564 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3370042 118564 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3370043 118564 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3370044 118564 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3370045 118564 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3370046 118564 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3370047 118564 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3370048 118564 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3370049 118564 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3370050 118564 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3370051 118564 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3370052 118564 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3370053 118564 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3370054 118564 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3370055 118564 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3370056 118564 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3370057 118564 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3370058 118564 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3370059 118564 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3370060 118564 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3370061 118564 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3370062 118564 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370063 118565 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3370064 118565 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3370065 118565 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3370066 118565 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3370067 118565 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3370068 118565 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3370069 118565 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3370070 118565 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3370071 118565 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3370072 118565 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3370073 118565 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3370074 118565 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3370075 118565 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3370076 118565 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3370077 118565 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3370078 118565 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3370079 118565 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3370080 118565 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3370081 118565 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3370082 118565 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3370083 118565 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3370084 118565 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3370085 118565 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3370086 118565 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3370087 118565 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3370088 118565 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3370089 118565 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3370090 118565 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3370091 118565 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3370092 118565 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3370093 118565 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3370094 118565 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3370095 118565 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3370096 118565 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3370097 118565 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3370098 118565 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3370099 118565 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3370100 118565 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370101 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3370102 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3370103 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3370104 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3370105 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3370106 118566 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3370107 118566 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3370108 118566 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3370109 118566 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3370110 118566 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3370111 118566 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3370112 118566 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3370113 118566 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3370114 118566 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3370115 118566 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3370116 118566 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3370117 118566 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3370118 118566 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3370119 118566 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370120 118567 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370121 118567 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3370122 118567 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3370123 118567 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3370124 118567 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3370125 118567 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3370126 118567 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3370127 118567 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3370128 118567 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3370129 118567 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3370130 118567 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3370131 118567 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3370132 118567 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3370133 118567 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3370134 118567 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3370135 118567 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3370136 118567 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3370137 118567 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3370138 118567 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3370139 118567 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3370140 118567 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3370141 118567 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3370142 118567 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3370143 118567 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3370144 118567 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3370145 118567 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3370146 118567 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3370147 118567 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3370148 118567 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3370149 118567 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3370150 118567 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3370151 118567 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370152 118568 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370153 118568 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3370154 118568 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3370155 118568 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3370156 118568 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3370157 118568 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3370158 118568 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3370159 118568 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3370160 118568 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3370161 118568 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3370162 118568 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3370163 118568 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3370164 118568 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3370165 118568 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3370166 118568 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3370167 118568 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3370168 118568 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3370169 118568 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3370170 118568 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3370171 118568 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370172 118569 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3370173 118569 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3370174 118569 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3370175 118569 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3370176 118569 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3370177 118569 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3370178 118569 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3370179 118569 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3370180 118569 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3370181 118569 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3370182 118569 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3370183 118569 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3370184 118569 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3370185 118569 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3370186 118569 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3370187 118569 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3370188 118569 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3370189 118569 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3370190 118569 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3370191 118569 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3370192 118569 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3370193 118569 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3370194 118569 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3370195 118569 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3370196 118569 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3370197 118569 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3370198 118569 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3370199 118569 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3370200 118569 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3370201 118569 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3370202 118569 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3370203 118569 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3370204 118569 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3370205 118569 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3370206 118569 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3370207 118569 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3370208 118569 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3370209 118569 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3370210 118569 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3370211 118569 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3370212 118569 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3370213 118569 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3370214 118569 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3370215 118569 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3370216 118569 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3370217 118569 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3370218 118569 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3370219 118569 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3370220 118569 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3370221 118569 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3370222 118569 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3370223 118569 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3370224 118569 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3370225 118569 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3370226 118569 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3370227 118569 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3370228 118569 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3370229 118569 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3370230 118569 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3370231 118569 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3370232 118569 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3370233 118569 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3370234 118569 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hulikatte in Davanagere Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370235 118570 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3370236 118570 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3370237 118570 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3370238 118570 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3370239 118570 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370240 118571 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3370241 118571 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3370242 118571 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3370243 118571 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3370244 118571 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3370245 118571 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3370246 118571 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3370247 118571 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3370248 118571 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3370249 118571 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3370250 118571 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3370251 118571 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3370252 118571 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3370253 118571 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3370254 118571 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3370255 118571 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3370256 118571 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3370257 118571 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3370258 118571 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3370259 118571 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3370260 118571 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3370261 118571 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3370262 118571 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3370263 118571 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3370264 118571 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3370265 118571 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3370266 118571 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3370267 118571 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3370268 118571 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3370269 118571 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3370270 118571 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3370271 118571 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3370272 118571 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3370273 118571 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3370274 118571 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3370275 118571 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3370276 118571 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3370277 118571 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3370278 118571 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3370279 118571 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3370280 118571 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3370281 118571 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3370282 118571 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3370283 118571 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3370284 118571 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3370285 118571 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3370286 118571 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370287 118572 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3370288 118572 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3370289 118572 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3370290 118572 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3370291 118572 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3370292 118572 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3370293 118572 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3370294 118572 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3370295 118572 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3370296 118572 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3370297 118572 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3370298 118572 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3370299 118572 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3370300 118572 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3370301 118572 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3370302 118572 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3370303 118572 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3370304 118572 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3370305 118572 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3370306 118572 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3370307 118572 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3370308 118572 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3370309 118572 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3370310 118572 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3370311 118572 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3370312 118572 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3370313 118572 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3370314 118572 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3370315 118572 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3370316 118572 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3370317 118572 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3370318 118572 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3370319 118572 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3370320 118572 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3370321 118572 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3370322 118572 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3370323 118572 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3370324 118572 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370325 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3370326 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3370327 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3370328 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3370329 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3370330 118573 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3370331 118573 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3370332 118573 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3370333 118573 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3370334 118573 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3370335 118573 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3370336 118573 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3370337 118573 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3370338 118573 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3370339 118573 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3370340 118573 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3370341 118573 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3370342 118573 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3370343 118573 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370344 118574 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370345 118574 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3370346 118574 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3370347 118574 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3370348 118574 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3370349 118574 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3370350 118574 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3370351 118574 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3370352 118574 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3370353 118574 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3370354 118574 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3370355 118574 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3370356 118574 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3370357 118574 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3370358 118574 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3370359 118574 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3370360 118574 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3370361 118574 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3370362 118574 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3370363 118574 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3370364 118574 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3370365 118574 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3370366 118574 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3370367 118574 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3370368 118574 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3370369 118574 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3370370 118574 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3370371 118574 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3370372 118574 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3370373 118574 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3370374 118574 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3370375 118574 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407530000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370376 118575 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370377 118575 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3370378 118575 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3370379 118575 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3370380 118575 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3370381 118575 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3370382 118575 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3370383 118575 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3370384 118575 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3370385 118575 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3370386 118575 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3370387 118575 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3370388 118575 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3370389 118575 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3370390 118575 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3370391 118575 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3370392 118575 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3370393 118575 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3370394 118575 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3370395 118575 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370396 118576 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3370397 118576 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3370398 118576 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3370399 118576 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3370400 118576 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3370401 118576 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3370402 118576 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3370403 118576 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3370404 118576 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3370405 118576 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3370406 118576 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3370407 118576 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3370408 118576 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3370409 118576 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3370410 118576 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3370411 118576 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3370412 118576 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3370413 118576 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3370414 118576 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3370415 118576 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3370416 118576 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3370417 118576 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3370418 118576 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3370419 118576 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3370420 118576 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3370421 118576 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3370422 118576 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3370423 118576 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3370424 118576 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3370425 118576 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3370426 118576 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3370427 118576 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3370428 118576 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3370429 118576 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3370430 118576 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3370431 118576 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3370432 118576 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3370433 118576 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3370434 118576 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3370435 118576 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3370436 118576 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3370437 118576 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3370438 118576 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3370439 118576 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3370440 118576 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3370441 118576 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3370442 118576 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3370443 118576 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3370444 118576 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3370445 118576 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3370446 118576 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3370447 118576 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3370448 118576 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3370449 118576 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3370450 118576 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3370451 118576 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3370452 118576 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3370453 118576 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3370454 118576 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3370455 118576 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3370456 118576 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3370457 118576 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3370458 118576 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Hale Kundadavada in Davanagere Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370459 118577 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3370460 118577 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3370461 118577 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3370462 118577 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3370463 118577 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370464 118578 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3370465 118578 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3370466 118578 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3370467 118578 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3370468 118578 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3370469 118578 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3370470 118578 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3370471 118578 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3370472 118578 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3370473 118578 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3370474 118578 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3370475 118578 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3370476 118578 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3370477 118578 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3370478 118578 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3370479 118578 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3370480 118578 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3370481 118578 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3370482 118578 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3370483 118578 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3370484 118578 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3370485 118578 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3370486 118578 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3370487 118578 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3370488 118578 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3370489 118578 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3370490 118578 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3370491 118578 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3370492 118578 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3370493 118578 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3370494 118578 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3370495 118578 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3370496 118578 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3370497 118578 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3370498 118578 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3370499 118578 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3370500 118578 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3370501 118578 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3370502 118578 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3370503 118578 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3370504 118578 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3370505 118578 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3370506 118578 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3370507 118578 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3370508 118578 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3370509 118578 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3370510 118578 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370511 118579 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3370512 118579 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3370513 118579 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3370514 118579 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3370515 118579 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3370516 118579 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3370517 118579 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3370518 118579 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3370519 118579 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3370520 118579 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3370521 118579 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3370522 118579 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3370523 118579 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3370524 118579 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3370525 118579 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3370526 118579 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3370527 118579 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3370528 118579 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3370529 118579 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3370530 118579 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3370531 118579 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3370532 118579 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3370533 118579 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3370534 118579 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3370535 118579 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3370536 118579 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3370537 118579 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3370538 118579 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3370539 118579 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3370540 118579 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3370541 118579 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3370542 118579 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3370543 118579 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3370544 118579 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3370545 118579 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3370546 118579 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3370547 118579 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3370548 118579 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370549 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3370550 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3370551 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3370552 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3370553 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3370554 118580 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3370555 118580 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3370556 118580 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3370557 118580 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3370558 118580 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3370559 118580 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3370560 118580 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3370561 118580 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3370562 118580 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3370563 118580 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3370564 118580 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3370565 118580 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3370566 118580 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3370567 118580 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District.Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370568 118581 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370569 118581 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3370570 118581 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3370571 118581 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3370572 118581 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3370573 118581 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3370574 118581 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3370575 118581 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3370576 118581 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3370577 118581 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3370578 118581 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3370579 118581 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3370580 118581 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3370581 118581 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3370582 118581 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3370583 118581 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3370584 118581 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3370585 118581 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3370586 118581 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3370587 118581 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3370588 118581 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3370589 118581 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3370590 118581 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3370591 118581 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3370592 118581 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3370593 118581 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3370594 118581 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3370595 118581 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3370596 118581 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3370597 118581 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3370598 118581 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3370599 118581 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District.Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370600 118582 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370601 118582 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3370602 118582 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3370603 118582 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3370604 118582 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3370605 118582 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3370606 118582 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3370607 118582 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3370608 118582 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3370609 118582 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3370610 118582 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3370611 118582 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3370612 118582 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3370613 118582 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3370614 118582 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3370615 118582 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3370616 118582 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3370617 118582 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3370618 118582 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3370619 118582 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings CConstruction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District . Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370620 118583 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3370621 118583 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3370622 118583 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3370623 118583 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3370624 118583 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3370625 118583 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3370626 118583 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3370627 118583 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3370628 118583 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3370629 118583 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3370630 118583 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3370631 118583 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3370632 118583 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3370633 118583 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3370634 118583 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3370635 118583 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3370636 118583 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3370637 118583 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3370638 118583 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3370639 118583 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3370640 118583 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3370641 118583 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3370642 118583 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3370643 118583 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3370644 118583 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3370645 118583 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3370646 118583 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3370647 118583 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3370648 118583 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3370649 118583 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3370650 118583 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3370651 118583 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3370652 118583 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3370653 118583 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3370654 118583 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3370655 118583 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3370656 118583 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3370657 118583 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3370658 118583 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3370659 118583 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3370660 118583 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3370661 118583 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3370662 118583 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3370663 118583 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3370664 118583 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3370665 118583 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3370666 118583 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3370667 118583 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3370668 118583 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3370669 118583 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3370670 118583 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3370671 118583 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3370672 118583 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3370673 118583 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3370674 118583 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3370675 118583 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3370676 118583 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3370677 118583 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3370678 118583 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3370679 118583 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3370680 118583 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3370681 118583 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3370682 118583 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings CConstruction of Health wellness centre at Kukkawada in Davanagere Taluk, Davanagere District . Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370683 118584 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3370684 118584 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3370685 118584 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3370686 118584 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3370687 118584 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370688 118585 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3370689 118585 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3370690 118585 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3370691 118585 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3370692 118585 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3370693 118585 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3370694 118585 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3370695 118585 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3370696 118585 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3370697 118585 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3370698 118585 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3370699 118585 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3370700 118585 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3370701 118585 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3370702 118585 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3370703 118585 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3370704 118585 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3370705 118585 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3370706 118585 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3370707 118585 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3370708 118585 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3370709 118585 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3370710 118585 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3370711 118585 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3370712 118585 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3370713 118585 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3370714 118585 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3370715 118585 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3370716 118585 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3370717 118585 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3370718 118585 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3370719 118585 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3370720 118585 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3370721 118585 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3370722 118585 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3370723 118585 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3370724 118585 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3370725 118585 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3370726 118585 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3370727 118585 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3370728 118585 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3370729 118585 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3370730 118585 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3370731 118585 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3370732 118585 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3370733 118585 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3370734 118585 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370735 118586 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3370736 118586 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3370737 118586 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3370738 118586 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3370739 118586 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3370740 118586 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3370741 118586 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3370742 118586 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3370743 118586 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3370744 118586 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3370745 118586 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3370746 118586 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3370747 118586 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3370748 118586 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3370749 118586 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3370750 118586 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3370751 118586 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3370752 118586 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3370753 118586 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3370754 118586 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3370755 118586 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3370756 118586 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3370757 118586 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3370758 118586 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3370759 118586 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3370760 118586 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3370761 118586 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3370762 118586 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3370763 118586 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3370764 118586 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3370765 118586 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3370766 118586 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3370767 118586 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3370768 118586 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3370769 118586 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3370770 118586 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3370771 118586 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3370772 118586 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370773 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3370774 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3370775 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3370776 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3370777 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3370778 118587 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3370779 118587 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3370780 118587 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3370781 118587 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3370782 118587 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3370783 118587 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3370784 118587 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3370785 118587 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3370786 118587 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3370787 118587 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3370788 118587 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3370789 118587 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3370790 118587 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3370791 118587 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370792 118588 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370793 118588 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3370794 118588 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3370795 118588 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3370796 118588 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3370797 118588 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3370798 118588 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3370799 118588 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3370800 118588 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3370801 118588 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3370802 118588 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3370803 118588 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3370804 118588 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3370805 118588 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3370806 118588 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3370807 118588 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3370808 118588 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3370809 118588 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3370810 118588 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3370811 118588 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3370812 118588 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3370813 118588 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3370814 118588 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3370815 118588 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3370816 118588 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3370817 118588 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3370818 118588 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3370819 118588 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3370820 118588 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3370821 118588 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3370822 118588 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3370823 118588 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407531000 0 None None Buildings CConstruction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370824 118589 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3370825 118589 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3370826 118589 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3370827 118589 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3370828 118589 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3370829 118589 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3370830 118589 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3370831 118589 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3370832 118589 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3370833 118589 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3370834 118589 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3370835 118589 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3370836 118589 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3370837 118589 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3370838 118589 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3370839 118589 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3370840 118589 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3370841 118589 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3370842 118589 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3370843 118589 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370844 118590 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3370845 118590 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3370846 118590 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3370847 118590 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3370848 118590 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3370849 118590 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3370850 118590 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3370851 118590 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3370852 118590 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3370853 118590 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3370854 118590 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3370855 118590 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3370856 118590 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3370857 118590 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3370858 118590 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3370859 118590 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3370860 118590 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3370861 118590 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3370862 118590 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3370863 118590 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3370864 118590 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3370865 118590 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3370866 118590 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3370867 118590 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3370868 118590 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3370869 118590 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3370870 118590 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3370871 118590 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3370872 118590 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3370873 118590 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3370874 118590 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3370875 118590 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3370876 118590 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3370877 118590 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3370878 118590 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3370879 118590 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3370880 118590 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3370881 118590 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3370882 118590 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3370883 118590 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3370884 118590 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3370885 118590 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3370886 118590 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3370887 118590 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3370888 118590 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3370889 118590 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3370890 118590 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3370891 118590 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3370892 118590 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3370893 118590 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3370894 118590 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3370895 118590 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3370896 118590 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3370897 118590 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3370898 118590 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3370899 118590 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3370900 118590 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3370901 118590 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3370902 118590 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3370903 118590 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3370904 118590 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3370905 118590 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3370906 118590 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kabbala in Channigiri Taluk, Davanagere District. dismantlingl 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370907 118591 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3370908 118591 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3370909 118591 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3370910 118591 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3370911 118591 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District.Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370912 118592 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3370913 118592 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3370914 118592 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3370915 118592 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3370916 118592 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3370917 118592 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3370918 118592 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3370919 118592 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3370920 118592 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3370921 118592 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3370922 118592 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3370923 118592 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3370924 118592 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3370925 118592 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3370926 118592 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3370927 118592 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3370928 118592 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3370929 118592 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3370930 118592 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3370931 118592 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3370932 118592 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3370933 118592 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3370934 118592 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3370935 118592 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3370936 118592 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3370937 118592 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3370938 118592 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3370939 118592 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3370940 118592 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3370941 118592 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3370942 118592 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3370943 118592 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3370944 118592 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3370945 118592 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3370946 118592 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3370947 118592 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3370948 118592 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3370949 118592 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3370950 118592 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3370951 118592 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3370952 118592 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3370953 118592 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3370954 118592 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3370955 118592 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3370956 118592 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3370957 118592 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3370958 118592 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District.Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370959 118593 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3370960 118593 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3370961 118593 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3370962 118593 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3370963 118593 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3370964 118593 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3370965 118593 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3370966 118593 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3370967 118593 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3370968 118593 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3370969 118593 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3370970 118593 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3370971 118593 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3370972 118593 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3370973 118593 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3370974 118593 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3370975 118593 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3370976 118593 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3370977 118593 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3370978 118593 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3370979 118593 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3370980 118593 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3370981 118593 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3370982 118593 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3370983 118593 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3370984 118593 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3370985 118593 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3370986 118593 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3370987 118593 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3370988 118593 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3370989 118593 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3370990 118593 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3370991 118593 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3370992 118593 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3370993 118593 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3370994 118593 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3370995 118593 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3370996 118593 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District.Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3370997 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3370998 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3370999 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3371000 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3371001 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3371002 118594 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3371003 118594 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3371004 118594 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3371005 118594 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3371006 118594 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3371007 118594 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3371008 118594 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3371009 118594 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3371010 118594 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3371011 118594 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3371012 118594 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3371013 118594 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3371014 118594 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3371015 118594 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District. water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371016 118595 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371017 118595 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3371018 118595 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3371019 118595 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3371020 118595 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3371021 118595 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3371022 118595 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3371023 118595 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3371024 118595 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3371025 118595 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3371026 118595 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3371027 118595 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3371028 118595 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3371029 118595 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3371030 118595 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3371031 118595 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3371032 118595 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3371033 118595 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3371034 118595 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3371035 118595 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3371036 118595 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3371037 118595 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3371038 118595 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3371039 118595 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3371040 118595 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3371041 118595 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3371042 118595 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3371043 118595 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3371044 118595 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3371045 118595 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3371046 118595 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3371047 118595 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District. water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371048 118596 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371049 118596 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3371050 118596 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3371051 118596 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3371052 118596 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3371053 118596 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3371054 118596 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3371055 118596 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3371056 118596 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3371057 118596 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3371058 118596 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3371059 118596 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3371060 118596 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3371061 118596 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3371062 118596 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3371063 118596 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3371064 118596 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3371065 118596 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3371066 118596 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3371067 118596 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371068 118597 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3371069 118597 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3371070 118597 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3371071 118597 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3371072 118597 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3371073 118597 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3371074 118597 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3371075 118597 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3371076 118597 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3371077 118597 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3371078 118597 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3371079 118597 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3371080 118597 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3371081 118597 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3371082 118597 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3371083 118597 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3371084 118597 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3371085 118597 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3371086 118597 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3371087 118597 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3371088 118597 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3371089 118597 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3371090 118597 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3371091 118597 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3371092 118597 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3371093 118597 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3371094 118597 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3371095 118597 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3371096 118597 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3371097 118597 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3371098 118597 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3371099 118597 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3371100 118597 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3371101 118597 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3371102 118597 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3371103 118597 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3371104 118597 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3371105 118597 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3371106 118597 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3371107 118597 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3371108 118597 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3371109 118597 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3371110 118597 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3371111 118597 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3371112 118597 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3371113 118597 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3371114 118597 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3371115 118597 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3371116 118597 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3371117 118597 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3371118 118597 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3371119 118597 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3371120 118597 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3371121 118597 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3371122 118597 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3371123 118597 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3371124 118597 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3371125 118597 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3371126 118597 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3371127 118597 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3371128 118597 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3371129 118597 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3371130 118597 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kodagikere in Channigiri Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371131 118598 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3371132 118598 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3371133 118598 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3371134 118598 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3371135 118598 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371136 118599 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3371137 118599 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3371138 118599 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3371139 118599 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3371140 118599 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3371141 118599 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3371142 118599 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3371143 118599 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3371144 118599 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3371145 118599 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3371146 118599 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3371147 118599 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3371148 118599 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3371149 118599 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3371150 118599 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3371151 118599 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3371152 118599 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3371153 118599 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3371154 118599 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3371155 118599 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3371156 118599 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3371157 118599 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3371158 118599 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3371159 118599 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3371160 118599 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3371161 118599 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3371162 118599 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3371163 118599 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3371164 118599 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3371165 118599 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3371166 118599 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3371167 118599 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3371168 118599 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3371169 118599 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3371170 118599 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3371171 118599 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3371172 118599 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3371173 118599 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3371174 118599 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3371175 118599 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3371176 118599 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3371177 118599 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3371178 118599 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3371179 118599 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3371180 118599 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3371181 118599 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3371182 118599 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371183 118600 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3371184 118600 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3371185 118600 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3371186 118600 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3371187 118600 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3371188 118600 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3371189 118600 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3371190 118600 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3371191 118600 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3371192 118600 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3371193 118600 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3371194 118600 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3371195 118600 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3371196 118600 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3371197 118600 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3371198 118600 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3371199 118600 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3371200 118600 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3371201 118600 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3371202 118600 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3371203 118600 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3371204 118600 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3371205 118600 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3371206 118600 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3371207 118600 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3371208 118600 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3371209 118600 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3371210 118600 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3371211 118600 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3371212 118600 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3371213 118600 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3371214 118600 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3371215 118600 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3371216 118600 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3371217 118600 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3371218 118600 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3371219 118600 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3371220 118600 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371221 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3371222 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3371223 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3371224 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3371225 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3371226 118601 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3371227 118601 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3371228 118601 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3371229 118601 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3371230 118601 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3371231 118601 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3371232 118601 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3371233 118601 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3371234 118601 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3371235 118601 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3371236 118601 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3371237 118601 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3371238 118601 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3371239 118601 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371240 118602 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371241 118602 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3371242 118602 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3371243 118602 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3371244 118602 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3371245 118602 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3371246 118602 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3371247 118602 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3371248 118602 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3371249 118602 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3371250 118602 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3371251 118602 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3371252 118602 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3371253 118602 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3371254 118602 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3371255 118602 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3371256 118602 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3371257 118602 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3371258 118602 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3371259 118602 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3371260 118602 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3371261 118602 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3371262 118602 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3371263 118602 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3371264 118602 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3371265 118602 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3371266 118602 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3371267 118602 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3371268 118602 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3371269 118602 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3371270 118602 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3371271 118602 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371272 118603 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371273 118603 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3371274 118603 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3371275 118603 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3371276 118603 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3371277 118603 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3371278 118603 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3371279 118603 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3371280 118603 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3371281 118603 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3371282 118603 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3371283 118603 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3371284 118603 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3371285 118603 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3371286 118603 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3371287 118603 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3371288 118603 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3371289 118603 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3371290 118603 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3371291 118603 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371292 118604 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3371293 118604 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3371294 118604 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3371295 118604 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3371296 118604 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3371297 118604 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3371298 118604 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3371299 118604 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3371300 118604 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3371301 118604 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3371302 118604 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3371303 118604 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3371304 118604 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3371305 118604 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3371306 118604 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3371307 118604 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3371308 118604 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3371309 118604 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3371310 118604 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3371311 118604 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3371312 118604 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3371313 118604 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3371314 118604 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3371315 118604 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3371316 118604 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3371317 118604 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3371318 118604 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3371319 118604 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3371320 118604 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3371321 118604 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3371322 118604 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3371323 118604 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3371324 118604 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3371325 118604 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3371326 118604 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3371327 118604 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3371328 118604 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3371329 118604 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3371330 118604 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3371331 118604 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3371332 118604 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3371333 118604 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3371334 118604 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3371335 118604 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3371336 118604 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3371337 118604 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3371338 118604 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3371339 118604 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3371340 118604 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3371341 118604 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3371342 118604 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3371343 118604 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3371344 118604 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3371345 118604 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3371346 118604 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3371347 118604 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3371348 118604 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3371349 118604 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3371350 118604 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3371351 118604 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3371352 118604 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3371353 118604 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3371354 118604 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kadaji in Davanagere Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371355 118605 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3371356 118605 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3371357 118605 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3371358 118605 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3371359 118605 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Civil GF 3120263.54 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371360 118606 None V3 Item No 2.5(ii)A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle A.In area of light jungle ---- etc., complete with all lead Sqm 463.74 463.74 1.0415 False None None False None False 482.98521 0 3371361 118606 None V1 Item No 1.13 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In Ordinary/Soft rock upto 300 mm depth ---- etc., complete with all lead Cum 427.16 427.16 31.25 False None None False None False 13348.75 0 3371362 118606 None V1 Item No 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work, In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 428.34 428.34 62.88 False None None False None False 26934.0192 0 3371363 118606 None V1 Item No 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7067.02 7067.02 22.12 False None None False None False 156322.4824 0 3371364 118606 None V2 Item No 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Cum 139.24 139.24 104.15 False None None False None False 14501.846 0 3371365 118606 None V1 Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M25 formwork charges included Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8074.59 8074.59 13.76 False None None False None False 111106.3584 0 3371366 118606 None V1 Item No 2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7700.77 7700.77 16.75 False None None False None False 128987.8975 0 3371367 118606 None V1 Item No 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 313.88 313.88 42.63 False None None False None False 13380.7044 0 3371368 118606 None V1 Item No 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 559.32 559.32 78.11 False None None False None False 43688.4852 0 3371369 118606 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 105559.26 105559.26 6.02 False None None False None False 635466.7452 0 3371370 118606 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13727.05 13727.05 4.49 False None None False None False 61634.4545 0 3371371 118606 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12919.58 12919.58 6.67 False None None False None False 86173.5986 0 3371372 118606 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11708.37 11708.37 1.08 False None None False None False 12645.0396 0 3371373 118606 None V1 Item No 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12112.11 12112.11 23.67 False None None False None False 286693.6437 0 3371374 118606 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7556.72 7556.72 1.28 False None None False None False 9672.6016 0 3371375 118606 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 215.39 False None None False None False 332949.862 0 3371376 118606 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1302.72 1302.72 29.31 False None None False None False 38182.7232 0 3371377 118606 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 116601.7 116601.7 0.47 False None None False None False 54802.799 0 3371378 118606 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1198.88 1198.88 8.0 False None None False None False 9591.04 0 3371379 118606 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 198.24 198.24 277.89 False None None False None False 55088.9136 0 3371380 118606 None V2 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Sqm 5284.04 5284.04 7.2 False None None False None False 38045.088 0 3371381 118606 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5347.76 5347.76 15.12 False None None False None False 80858.1312 0 3371382 118606 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 413.0 413.0 16.0 False None None False None False 6608.0 0 3371383 118606 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 279.66 279.66 16.0 False None None False None False 4474.56 0 3371384 118606 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1168.2 1168.2 8.0 False None None False None False 9345.6 0 3371385 118606 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 141.6 141.6 8.0 False None None False None False 1132.8 0 3371386 118606 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 70.8 70.8 32.0 False None None False None False 2265.6 0 3371387 118606 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 7946.12 7946.12 11.25 False None None False None False 89393.85 0 3371388 118606 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 1.08 False None None False None False 7288.2936 0 3371389 118606 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 248.98 248.98 97.14 False None None False None False 24185.9172 0 3371390 118606 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 369.84 False None None False None False 159726.4992 0 3371391 118606 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 411.82 411.82 303.52 False None None False None False 124995.6064 0 3371392 118606 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 118.0 118.0 466.98 False None None False None False 55103.64 0 3371393 118606 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.36 61.36 86.13 False None None False None False 5284.9368 0 3371394 118606 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1460.84 1460.84 122.18 False None None False None False 178485.4312 0 3371395 118606 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1049.02 1049.02 7.2 False None None False None False 7552.944 0 3371396 118606 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 416.54 416.54 129.38 False None None False None False 53891.9452 0 3371397 118606 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 944.0 944.0 36.0 False None None False None False 33984.0 0 3371398 118606 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 149.86 149.86 466.98 False None None False None False 69981.6228 0 3371399 118606 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 184.08 184.08 226.01 False None None False None False 41603.9208 0 3371400 118606 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 18.81 False None None False None False 1109.79 0 3371401 118606 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 110.92 110.92 18.81 False None None False None False 2086.4052 0 3371402 118606 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 666.7 666.7 27.05 False None None False None False 18034.235 0 3371403 118606 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 135.7 135.7 20.07 False None None False None False 2723.499 0 3371404 118606 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 24.0 False None None False None False 2888.64 0 3371405 118606 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 506.22 506.22 12.45 False None None False None False 6302.439 0 3371406 118606 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 62.54 62.54 20.07 False None None False None False 1255.1778 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Civil FF 1852293.72 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371407 118607 None V2 Item No 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 106614.9 106614.9 2.76 False None None False None False 294257.124 0 3371408 118607 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13864.33 13864.33 3.08 False None None False None False 42702.1364 0 3371409 118607 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 13048.78 13048.78 7.61 False None None False None False 99301.2158 0 3371410 118607 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 11825.45 11825.45 0.7 False None None False None False 8277.815 0 3371411 118607 None V1 Item No 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & including formwork charges ---- etc., complete with all lead Cum 12233.24 12233.24 18.2 False None None False None False 222644.968 0 3371412 118607 None V1 Item No 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7632.28 7632.28 1.91 False None None False None False 14577.6548 0 3371413 118607 None V2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 188.57 False None None False None False 294404.9125 0 3371414 118607 None V2 Item No 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1315.74 1315.74 35.97 False None None False None False 47327.1678 0 3371415 118607 None V2 Item No 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 117767.7 117767.7 0.38 False None None False None False 44751.726 0 3371416 118607 None V2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1210.85 1210.85 6.0 False None None False None False 7265.1 0 3371417 118607 None V2 Item No 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 200.22 200.22 266.54 False None None False None False 53366.6388 0 3371418 118607 None V2 Item No 12.57.4 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.35 mm thick both side Teak ---- etc., complete with all lead Sqm 5401.23 5401.23 11.97 False None None False None False 64652.7231 0 3371419 118607 None V2 Item No 12.76.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- etc., complete with all lead Nos 417.13 417.13 12.0 False None None False None False 5005.56 0 3371420 118607 None V2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead Nos 282.45 282.45 12.0 False None None False None False 3389.4 0 3371421 118607 None V2 Item No 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- etc., complete with all lead Nos 1179.88 1179.88 6.0 False None None False None False 7079.28 0 3371422 118607 None V2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead Nos 143.01 143.01 4.0 False None None False None False 572.04 0 3371423 118607 None V2 Item No 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 71.5 71.5 24.0 False None None False None False 1716.0 0 3371424 118607 None V2 Item No 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8025.58 8025.58 9.0 False None None False None False 72230.22 0 3371425 118607 None V2 Item No 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6748.42 6748.42 0.72 False None None False None False 4858.8624 0 3371426 118607 None V2 Item No 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 251.46 251.46 55.47 False None None False None False 13948.4862 0 3371427 118607 None V2 Item No 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 436.19 436.19 292.14 False None None False None False 127428.5466 0 3371428 118607 None V2 Item No 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 185.92 False None None False None False 77329.7056 0 3371429 118607 None V2 Item No 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 119.18 119.18 354.03 False None None False None False 42193.2954 0 3371430 118607 None V2 Item No 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 61.97 61.97 181.32 False None None False None False 11236.4004 0 3371431 118607 None V2 Item No 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1475.44 1475.44 74.95 False None None False None False 110584.228 0 3371432 118607 None V2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1059.51 1059.51 5.95 False None None False None False 6304.0845 0 3371433 118607 None V2 Item No 9.14 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- etc., complete with all lead Sqm 420.7 420.7 68.28 False None None False None False 28725.396 0 3371434 118607 None V2 Item No 9.2 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ---- etc., complete with all lead Sqm 953.44 953.44 17.36 False None None False None False 16551.7184 0 3371435 118607 None V2 Item No 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 151.35 151.35 354.03 False None None False None False 53582.4405 0 3371436 118607 None V2 Item No 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 185.92 185.92 141.49 False None None False None False 26305.8208 0 3371437 118607 None V2 Item No 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 59.0 59.0 9.72 False None None False None False 573.48 0 3371438 118607 None V2 Item No 8.43 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 112.02 112.02 9.72 False None None False None False 1088.8344 0 3371439 118607 None V2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kgs 673.36 673.36 18.51 False None None False None False 12463.8936 0 3371440 118607 None V2 Item No 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 137.05 137.05 15.3 False None None False None False 2096.865 0 3371441 118607 None Item Code 12.74.1 Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- etc., complete with all lead No 120.36 120.36 18.0 False None None False None False 2166.48 0 3371442 118607 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 511.28 511.28 12.45 False None None False None False 6365.436 0 3371443 118607 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.16 63.16 15.3 False None None False None False 966.348 0 3371444 118607 None PWD SR 2023-24, Vol-2, Page No-149, Item No- 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 973.7 973.7 24.65 False None None False None False 24001.705 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Civil TF 554197.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371445 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Columns ---- etc., complete with all lead Cum 14001.59 14001.59 3.08 False None None False None False 43124.8972 0 3371446 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam and roof beam ---- etc., complete with all lead Cum 13177.98 13177.98 1.16 False None None False None False 15286.4568 0 3371447 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- etc., complete with all lead Cum 11942.54 11942.54 0.12 False None None False None False 1433.1048 0 3371448 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Slab and Staircase ---- etc., complete with all lead Cum 12354.35 12354.35 6.89 False None None False None False 85121.4715 0 3371449 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.11a Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- etc., complete with all lead Tonne 107670.44 107670.44 1.28 False None None False None False 137818.1632 0 3371450 118608 None PWD SR 2023-24, Vol-1, Page No-15, Item No- 2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7707.85 7707.85 1.07 False None None False None False 8247.3995 0 3371451 118608 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1561.25 1561.25 7.73 False None None False None False 12068.4625 0 3371452 118608 None Item Code 8.10 Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 253.95 253.95 17.29 False None None False None False 4390.7955 0 3371453 118608 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 440.51 440.51 61.39 False None None False None False 27042.9089 0 3371454 118608 None Item Code 8.6.2 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 516.34 516.34 12.45 False None None False None False 6428.433 0 3371455 118608 None Item Code 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 120.36 120.36 78.68 False None None False None False 9469.9248 0 3371456 118608 None Item Code 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 415.93 415.93 95.5 False None None False None False 39721.315 0 3371457 118608 None Item Code 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 62.58 62.58 30.45 False None None False None False 1905.561 0 3371458 118608 None Item Code 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 187.76 187.76 80.2 False None None False None False 15058.352 0 3371459 118608 None Item Code 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 63.79 63.79 1.89 False None None False None False 120.5631 0 3371460 118608 None Item Code 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 138.41 138.41 1.89 False None None False None False 261.5949 0 3371461 118608 None Item Code 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 680.03 680.03 6.05 False None None False None False 4114.1815 0 3371462 118608 None Item Code 15.1 Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 983.34 983.34 132.77 False None None False None False 130558.0518 0 3371463 118608 None Item Code 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 152.85 152.85 78.68 False None None False None False 12026.238 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Water supply GF 195086.34 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371464 118609 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371465 118609 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 164.02 164.02 5.0 False None None False None False 820.1 0 3371466 118609 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 145.14 145.14 30.0 False None None False None False 4354.2 0 3371467 118609 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 300.9 300.9 28.0 False None None False None False 8425.2 0 3371468 118609 None Item Code 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete with all lead m 232.46 232.46 20.0 False None None False None False 4649.2 0 3371469 118609 None Item Code 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete with all lead m 343.38 343.38 20.0 False None None False None False 6867.6 0 3371470 118609 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 371.7 371.7 6.0 False None None False None False 2230.2 0 3371471 118609 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6645.76 6645.76 2.0 False None None False None False 13291.52 0 3371472 118609 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1201.24 1201.24 1.0 False None None False None False 1201.24 0 3371473 118609 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 329.22 329.22 1.0 False None None False None False 329.22 0 3371474 118609 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6563.16 6563.16 1.0 False None None False None False 6563.16 0 3371475 118609 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 585.28 585.28 1.0 False None None False None False 585.28 0 3371476 118609 None Item Code 14.44 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead No 13244.32 13244.32 1.0 False None None False None False 13244.32 0 3371477 118609 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7052.86 7052.86 1.0 False None None False None False 7052.86 0 3371478 118609 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2183.0 2183.0 1.0 False None None False None False 2183.0 0 3371479 118609 None Item Code20.44.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm ---- etc., complete with all lead Each 4185.46 4185.46 2.0 False None None False None False 8370.92 0 3371480 118609 None Item Code14.4.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead No 15422.6 15422.6 1.0 False None None False None False 15422.6 0 3371481 118609 None Item Code14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead No 5996.76 5996.76 1.0 False None None False None False 5996.76 0 3371482 118609 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1146.96 1146.96 1.0 False None None False None False 1146.96 0 3371483 118609 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1025.91 1025.91 2.0 False None None False None False 2051.82 0 3371484 118609 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3636.76 3636.76 1.0 False None None False None False 3636.76 0 3371485 118609 None Rate approved Wellness center at Haronagalli in Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawing for supporting water supply pipes with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls / outer walls etc. The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08mm thick conformed to IS 1239 etc., complete as directed by the employer. (Market Rate) ---- etc., complete with all lead No 767.0 767.0 15.0 False None None False None False 11505.0 0 3371486 118609 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 364.62 364.62 10.0 False None None False None False 3646.2 0 3371487 118609 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 447.22 447.22 50.0 False None None False None False 22361.0 0 3371488 118609 None Item Code 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc., complete with all lead m 256.06 256.06 20.0 False None None False None False 5121.2 0 3371489 118609 None Item Code 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 40 mm nominal dia Pipes ---- etc., complete with all lead m 562.86 562.86 20.0 False None None False None False 11257.2 0 3371490 118609 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. a) 20mm dia (Market Rate) ---- etc., complete with all lead No 649.0 649.0 4.0 False None None False None False 2596.0 0 3371491 118609 None Rate approved Wellness center at Haronagalli in Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.b) 25mm dia (Market Rate) ---- etc., complete with all lead No 944.0 944.0 2.0 False None None False None False 1888.0 0 3371492 118609 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 3371493 118609 None Item Code 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1545.8 1545.8 2.25 False None None False None False 3478.05 0 3371494 118609 None Item Code 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 431.88 431.88 4.88 False None None False None False 2107.5744 0 3371495 118609 None Item Code 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.62 10.62 2000.0 False None None False None False 21240.0 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Water supply FF 91340.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371496 118610 None Item Code 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 108.56 108.56 10.0 False None None False None False 1085.6 0 3371497 118610 None Item Code 16.7.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 165.66 165.66 10.0 False None None False None False 1656.6 0 3371498 118610 None Sl.NO 657 PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines ---- etc., complete with all lead m 146.59 146.59 10.0 False None None False None False 1465.9 0 3371499 118610 None Sl.NO 647 PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines ---- etc., complete with all lead m 303.91 303.91 15.0 False None None False None False 4558.65 0 3371500 118610 None Rate approved Wellness center at Haronagalli in Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards (Market Rate) ---- etc., complete with all lead No 375.42 375.42 5.0 False None None False None False 1877.1 0 3371501 118610 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate) ---- etc., complete with all lead No 6712.22 6712.22 2.0 False None None False None False 13424.44 0 3371502 118610 None Item Code 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm ---- etc., complete with all lead Each 1213.25 1213.25 2.0 False None None False None False 2426.5 0 3371503 118610 None Item Code 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead No 332.51 332.51 2.0 False None None False None False 665.02 0 3371504 118610 None Item Code 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead No 6628.79 6628.79 2.0 False None None False None False 13257.58 0 3371505 118610 None Item Code 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead No 591.13 591.13 1.0 False None None False None False 591.13 0 3371506 118610 None Item Code 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead No 7123.39 7123.39 1.0 False None None False None False 7123.39 0 3371507 118610 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). (Market Rate) ---- etc., complete with all lead No 2204.83 2204.83 2.0 False None None False None False 4409.66 0 3371508 118610 None Item Code 14.40.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5758.78 5758.78 1.0 False None None False None False 5758.78 0 3371509 118610 None Rate approved Wellness center at Haronagalli in Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. ( Jaguar make or Equalent ) (Market Place) ---- etc., complete with all lead No 1158.43 1158.43 1.0 False None None False None False 1158.43 0 3371510 118610 None Rate approved Wellness center at Haronagalli in Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. (Market Place) ---- etc., complete with all lead No 1035.17 1035.17 2.0 False None None False None False 2070.34 0 3371511 118610 None Item Code 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead No 3673.13 3673.13 1.0 False None None False None False 3673.13 0 3371512 118610 None Item Code 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 368.27 368.27 10.0 False None None False None False 3682.7 0 3371513 118610 None Item Code 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal dia Pipes ---- etc., complete with all lead m 451.69 451.69 30.0 False None None False None False 13550.7 0 3371514 118610 None Item Code 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc., complete with all lead m 568.49 568.49 15.0 False None None False None False 8527.35 0 3371515 118610 None Sl.N086 Pg No A14 Brass bib-cock 15 mm dia ---- etc., complete with all lead Each 188.8 188.8 2.0 False None None False None False 377.6 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Electrical 434109.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371516 118611 None Item Code 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Short point up to 3M from tapping point to out let via switch ---- etc., complete with all lead Point 317.41 317.41 30.0 False None None False None False 9522.3 0 3371517 118611 None Item Code 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Medium point above 3M up to 6M from tapping point to out let via switch ---- etc., complete with all lead Point 447.21 447.21 22.0 False None None False None False 9838.62 0 3371518 118611 None Item Code 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS694 and latest amendments) without control switch shall be fixed on the existing plastic sheet gang box , the other end of the wires shall be terminated with sufficient loose length in a woodPVC round block. complete for each outlet. Long point above 6M up to 10M from tapping point to out let via switch ---- etc., complete with all lead Point 654.9 654.9 16.0 False None None False None False 10478.4 0 3371519 118611 None Item Code 3.4.1 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1 to 2 Way ---- etc., complete with all lead Each 162.84 162.84 21.0 False None None False None False 3419.64 0 3371520 118611 None Item Code 3.4.2 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 4 to 5Way ---- etc., complete with all lead Each 208.85 208.85 6.0 False None None False None False 1253.1 0 3371521 118611 None Item Code 3.4.3 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 6Way ---- etc., complete with all lead Each 259.59 259.59 2.0 False None None False None False 519.18 0 3371522 118611 None Item Code 3.4.4 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 8 Way ---- etc., complete with all lead Each 307.97 307.97 13.0 False None None False None False 4003.61 0 3371523 118611 None Item Code 3.4.5 Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 1012Way ---- etc., complete with all lead Each 376.41 376.41 4.0 False None None False None False 1505.64 0 3371524 118611 None Item Code 3.5.1 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1 to 2 Module ---- etc., complete with all lead Each 161.66 161.66 21.0 False None None False None False 3394.86 0 3371525 118611 None Item Code 3.5.2 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 4 Module ---- etc., complete with all lead Each 206.5 206.5 6.0 False None None False None False 1239.0 0 3371526 118611 None Item Code 3.5.3 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 6 Module ---- etc., complete with all lead Each 276.12 276.12 2.0 False None None False None False 552.24 0 3371527 118611 None Item Code 3.5.4 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 8 Module ---- etc., complete with all lead Each 335.12 335.12 13.0 False None None False None False 4356.56 0 3371528 118611 None Item Code 3.5.5 Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing metalPVC box 1012 Module ---- etc., complete with all lead Each 405.92 405.92 4.0 False None None False None False 1623.68 0 3371529 118611 None Item Code 3.6.1 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 120.36 120.36 102.0 False None None False None False 12276.72 0 3371530 118611 None Item Code 3.6.2 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- etc., complete with all lead Each 195.88 195.88 6.0 False None None False None False 1175.28 0 3371531 118611 None Item Code 3.6.3 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 201.78 201.78 35.0 False None None False None False 7062.3 0 3371532 118611 None Item Code 3.6.4 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 421.26 421.26 12.0 False None None False None False 5055.12 0 3371533 118611 None Item Code 3.6.8 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete with all lead Each 208.86 208.86 2.0 False None None False None False 417.72 0 3371534 118611 None Item Code 3.6.9 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- etc., complete with all lead Each 384.66 384.66 11.0 False None None False None False 4231.26 0 3371535 118611 None Item Code 3.6.10 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- etc., complete with all lead Each 278.48 278.48 11.0 False None None False None False 3063.28 0 3371536 118611 None Item Code 3.6.11 Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- etc., complete with all lead Each 184.08 184.08 3.0 False None None False None False 552.24 0 3371537 118611 None Item Code 12.2.1 Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- etc., complete with all lead Each 290.28 290.28 2.0 False None None False None False 580.56 0 3371538 118611 None Item Code 12.2.1 Supplying and fixing Metal Fan Box with round hook ---- etc., complete with all lead No 138.06 138.06 12.0 False None None False None False 1656.72 0 3371539 118611 None Item Code 1.2.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire whereng the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary (22) 1920mm dia 2mm thick ---- etc., complete with all lead m 77.88 77.88 350.0 False None None False None False 27258.0 0 3371540 118611 None Item Code 1.2.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction box es and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(22) 25mm dia 2mm thick ---- etc., complete with all lead m 92.04 92.04 320.0 False None None False None False 29452.8 0 3371541 118611 None Item Code 1.3.1 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.1920mm dia 2mm thick ---- etc., complete with all lead m 80.24 80.24 120.0 False None None False None False 9628.8 0 3371542 118611 None Item Code 1.3.2 Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 93.22 93.22 100.0 False None None False None False 9322.0 0 3371543 118611 None Item Code 2.3.1 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694 confirming to latest amendments 1.0sqmm ---- etc., complete with all lead m 22.42 22.42 125.0 False None None False None False 2802.5 0 3371544 118611 None Item Code 2.3.3 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 2.5 sqmm ---- etc., complete with all lead m 49.55 49.55 450.0 False None None False None False 22297.5 0 3371545 118611 None Item Code 2.3.4 Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694confirming to latest amendments 4 sqmm ---- etc., complete with all lead m 74.33 74.33 400.0 False None None False None False 29732.0 0 3371546 118611 None Item Code 5.18.9 Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II Single Door 12 Way SP and N ---- etc., complete with all lead Each 2748.22 2748.22 2.0 False None None False None False 5496.44 0 3371547 118611 None Item Code 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 to 32Amps SP ---- etc., complete with all lead Each 489.7 489.7 20.0 False None None False None False 9794.0 0 3371548 118611 None Item Code 5.20.1 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- etc., complete with all lead Each 5046.86 5046.86 2.0 False None None False None False 10093.72 0 3371549 118611 None Item Code 2.5.23 Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working voltage upto 1100 v as per IS 694 2010 ---- etc., complete with all lead m 387.04 387.04 30.0 False None None False None False 11611.2 0 3371550 118611 None Item Code 12.56 Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3371551 118611 None Item Code 11.3.2 Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit should be filled with a equal proportion of salt and charcoal 150 mm allround the pipe to complete depth. The connection from the pipe to the conduit etc is to be established through GI Wire of size as per ISI Specification 7.3.3 of IS 732 using 12mm dia bolts, nuts washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead Each 814.19 814.19 26.0 False None None False None False 21168.94 0 3371552 118611 None Item Code 11.4.2 Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB with CCT 6500 degree K CRI greater then 70percent . efficacy greater then100 lumen per W 120 degree beam spread lifegreater then 25000 burning hours and Compliance to IS10322 or IEC 60598 LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED s are driven by HF electronic driver integrated in a separate control gear assembly with PF greater then 0.95 power loss should less then 5 percent of lamp Wage short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. ---- etc., complete with all lead Each 1497.42 1497.42 2.0 False None None False None False 2994.84 0 3371553 118611 None Item Code 11.11.3 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 175.82 175.82 5.0 False None None False None False 879.1 0 3371554 118611 None Item Code 11.11.7 Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life greater then 25000 burning hours and Compliance to IS 10322 or IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integratedin the system,with PFgreater then 0.95 power loss should lesser then 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit THD less than 20percent Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL or CPRI accredited laboratorywith 2 years Warranty against any manufacturing defect working under standard electrical condition ---- etc., complete with all lead Each 502.68 502.68 12.0 False None None False None False 6032.16 0 3371555 118611 None Item Code 12.27 Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- etc., complete with all lead Each 61.36 61.36 2.0 False None None False None False 122.72 0 3371556 118611 None Item Code 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance ABLCPRI and any Government certified agency and Design and Development facility certified by ISO 90012008 . Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeNichia LumiledsOsram make LED Source. LED Streetlight 40W ---- etc., complete with all lead Each 4748.32 4748.32 2.0 False None None False None False 9496.64 0 3371557 118611 None Item Code 6.1 Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1760.56 1760.56 5.0 False None None False None False 8802.8 0 3371558 118611 None Item Code 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball bearing system. 48 PERCENT Sweep (1200mm) Regular model ---- etc., complete with all lead Each 3521.12 3521.12 12.0 False None None False None False 42253.44 0 3371559 118611 None Item Code 13.7.1 fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 143.96 143.96 28.0 False None None False None False 4030.88 0 3371560 118611 None Item Code 13.13 fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 834.26 834.26 5.0 False None None False None False 4171.3 0 3371561 118611 None Item Code 13.4.1 Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12ms. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5m. Length ---- etc., complete with all lead Each 1723.98 1723.98 2.0 False None None False None False 3447.96 0 3371562 118611 None Item Code 13.5 fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 191.16 191.16 2.0 False None None False None False 382.32 0 3371563 118611 None Item Code 5.42.1 Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red o x ide primer paint and finally finished with approved colour etc complete 16SWG ---- etc., complete with all lead Sqm 0.59 0.59 30000.0 False None None False None False 17700.0 0 3371564 118611 None Item Code 5.40.1 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator which are mounted on powder coated 40 x 6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete. 100Amps 4 x 30 x 6mm Aluminum Strips ---- etc., complete with all lead m 2908.7 2908.7 3.0 False None None False None False 8726.1 0 3371565 118611 None Item Code 5.41.1 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint 40 x 40 x 6mm ---- etc., complete with all lead m 359.9 359.9 1.0 False None None False None False 359.9 0 3371566 118611 None Item Code 5.41.4 Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 x 100 x 50 x 6mm C channel ---- etc., complete with all lead m 892.07 892.07 2.0 False None None False None False 1784.14 0 3371567 118611 None Item Code 5.15.9 Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit thermal Magnetic or Micro processor release and earth fault as per IS 13947 icu ir equal to ics ---- etc., complete with all lead m 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3371568 118611 None Item Code 5.18.4 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 ot 32Amps DP ---- etc., complete with all lead Each 872.02 872.02 3.0 False None None False None False 2616.06 0 3371569 118611 None Item Code 5.18.9 Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 to 63Amps TPN ---- etc., complete with all lead Each 3643.84 3643.84 1.0 False None None False None False 3643.84 0 3371570 118611 None Item Code 5.7.2 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- etc., complete with all lead Each 284.38 284.38 3.0 False None None False None False 853.14 0 3371571 118611 None Item Code 5.7.3 Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- etc., complete with all lead Each 473.18 473.18 1.0 False None None False None False 473.18 0 3371572 118611 None Item Code 5.12.1 Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- etc., complete with all lead Each 8119.58 8119.58 1.0 False None None False None False 8119.58 0 3371573 118611 None Item Code 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete with all lead Each 236.0 236.0 1.0 False None None False None False 236.0 0 3371574 118611 None Item Code 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete with all lead Each 188.8 188.8 1.0 False None None False None False 188.8 0 3371575 118611 None Item Code 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- etc., complete with all lead Each 1681.5 1681.5 2.0 False None None False None False 3363.0 0 3371576 118611 None Item Code 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC. 50 Hz 1224V D.C. ---- etc., complete with all lead Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3371577 118611 None Item Code 5.34 Supplying, fixing and wiring 505 to 4005A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead Each 663.16 663.16 3.0 False None None False None False 1989.48 0 3371578 118611 None Item Code 5.30 Supplying, fixing and wiring Electronic Trivector Meter ETV5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete with all lead Each 1628.4 1628.4 3.0 False None None False None False 4885.2 0 1719407531000 0 None None Buildings Construction of Health wellness centre at Kunkava in Honalli Taluk, Davanagere District. Dismantiling 201441.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3371579 118612 None PWD SR-2023-24Volume-2, Page No-163, Item no-19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR-2023-24Volume-2, Page No-163, Item no-19.3) ---- etc., complete with all lead Cum 2862.68 2862.68 26.56 False None None False None False 76032.7808 0 3371580 118612 None PWD SR-2023-24, Volume-2, Page No-163, Item no-19. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead Cum 568.76 568.76 144.29 False None None False None False 82066.3804 0 3371581 118612 None PWD SR-2023-24 Volume-2, Page No-192, Item no-19.5 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge. 120 x 120 cm (outside to outside) (PWD SR-2023-24 Volume-2, Page No-192, Item no-19.54.1 ---- etc., complete with all lead Cum 892.08 892.08 14.15 False None None False None False 12622.932 0 3371582 118612 None PWD SR-2023-24, Volume-2, Page No-188, Item no-19. Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engineerin-charge. ---- etc., complete with all lead Cum 283.2 283.2 4.41 False None None False None False 1248.912 0 3371583 118612 None PWD SR-2023-24 Volume-3, Page No-3, Item no-1.1A Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- etc., complete with all lead Cum 159.3 159.3 185.0 False None None False None False 29470.5 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719407533000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719407533000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719407533000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1719407533000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719407533000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719407599000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1719407621000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1719407692000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1719407721000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1719407761000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1719407782000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1719407791000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1719407801000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1719407825000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1719407836000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1719407848000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1719407868000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1719407877000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1719407938000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1719407949000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1719407961000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1719407972000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work None 1719407987000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1719408004000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs. 291.00 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1) Earthwork Excavation /Embankment 3310.00 Cum 2) RCC and PCC 1523.00 Cum 3) Steel Reinforcement for RCC work 67.00 Tonnes 4)Cement Concrete Block Masonry/Solid Block Masonry 3481.00 Sqm 5) Flooring / Dadooing (Vitrified/Granite/Ceramic/Cement concrete/cladding 2095.00 Sqm, 6)Plastering 9430.00 Sqm, 7)Painting 7802.00 Sqm Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.14.50 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.10.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.3(a)Each Tenderer should further demonstrate(a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required, specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease, hire basis for all works provided, the relevant documents (commitment agreements etc., for availability for this work are furnished. Sl.No Description of Equipment Total Quantity, Own, Hire 1) Min 10 cft capacity Concrete Mixer 4 Nos. 2) Steel Centering and shuttering sheets 600 Sqmtr, 3) Tipper 2 Nos. 4) Water tanker 2 Nos, 5) Bar Bending and cutting machine 2 Nos. Note All Machinery purchased during last five years only should be used and will be considered for evaluation Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Tax Invoice/Agreements from the supplier None None None None KPWD Class-I Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 updated to 2024-25 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2024-25 price level of existing commitments and ongoing works to be completed during the next 06 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Ongoing commitments and Bids submitted for the works certificate issued by the officer not less than the rank of Executive Engineer None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1) Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 One, 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 One. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates None None None None Clause ITT 3.2(a):The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs. 1161.00 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.175.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued by a Scheduled/ Nationalized Bank
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate issued by Chartered Accountant True Technical Bid Company Registration Certificate issued by KPWD True Technical Bid ESI & PF Registration certificates True Technical Bid Work done certificates True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719409079000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, HFWD, Arogya Soudha, 3rd Floor, 1st Cross Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None