| 1719403987000 | 0 | None | None | Buildings | Construction of Two Class Room to Govt Higher Primary School at Horamavu Agara, Bangalore East Taluk, Bangalore Urban. Under Viveka Yojane/2022-23 | 2772862.4 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3367575 | 118486 | None | Code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work.In all kinds of soils upto 300 mm depth with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 123.31 | 123.31 | 33.6 | False | None | None | False | None | False | 4143.216 | 0 | | 3367576 | 118486 | None | Code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 132.4 | 132.4 | 107.84 | False | None | None | False | None | False | 14278.016 | 0 | | 3367577 | 118486 | None | Code03 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 7351.87 | 7351.87 | 19.74 | False | None | None | False | None | False | 145125.9138 | 0 | | 3367578 | 118486 | None | Code04 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Column Footing with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 9083.92 | 9083.92 | 17.55 | False | None | None | False | None | False | 159422.796 | 0 | | 3367579 | 118486 | None | Code05 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Column Below Ground Level with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 14298.77 | 14298.77 | 1.36 | False | None | None | False | None | False | 19446.3272 | 0 | | 3367580 | 118486 | None | Code06 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Plinth Beam with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 12616.56 | 12616.56 | 5.26 | False | None | None | False | None | False | 66363.1056 | 0 | | 3367581 | 118486 | None | Code07 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 8069.67 | 8069.67 | 2.59 | False | None | None | False | None | False | 20900.4453 | 0 | | 3367582 | 118486 | None | Code08 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Columns with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 15099.76 | 15099.76 | 4.87 | False | None | None | False | None | False | 73535.8312 | 0 | | 3367583 | 118486 | None | Code09 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Lintels with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 14211.54 | 14211.54 | 6.23 | False | None | None | False | None | False | 88537.8942 | 0 | | 3367584 | 118486 | None | Code10 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Roof with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 13323.32 | 13323.32 | 16.06 | False | None | None | False | None | False | 213972.5192 | 0 | | 3367585 | 118486 | None | Code11 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Chejja with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 12879.22 | 12879.22 | 0.27 | False | None | None | False | None | False | 3477.3894 | 0 | | 3367586 | 118486 | None | Code12 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - Buildings with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | t | 116115.19 | 116115.19 | 5.42 | False | None | None | False | None | False | 629344.3298 | 0 | | 3367587 | 118486 | None | Code13 | Providing Size stone Masonry with hard stone in Foundation &Plinth with Cement mortor 1:6 (1 cement,:6 coarse sand) with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 8292.92 | 8292.92 | 39.26 | False | None | None | False | None | False | 325580.0392 | 0 | | 3367588 | 118486 | None | Code14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Cum | 345.27 | 345.27 | 53.92 | False | None | None | False | None | False | 18616.9584 | 0 | | 3367589 | 118486 | None | Code15 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1597.84 | 1597.84 | 137.13 | False | None | None | False | None | False | 219111.7992 | 0 | | 3367590 | 118486 | None | Code16 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 330.99 | 330.99 | 12.51 | False | None | None | False | None | False | 4140.6849 | 0 | | 3367591 | 118486 | None | Code17 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 330.99 | 330.99 | 94.25 | False | None | None | False | None | False | 31195.8075 | 0 | | 3367592 | 118486 | None | Code18 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 362.14 | 362.14 | 140.72 | False | None | None | False | None | False | 50960.3408 | 0 | | 3367593 | 118486 | None | Code19 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 481.56 | 481.56 | 249.66 | False | None | None | False | None | False | 120226.2696 | 0 | | 3367594 | 118486 | None | Code20 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 5812.44 | 5812.44 | 5.04 | False | None | None | False | None | False | 29294.6976 | 0 | | 3367595 | 118486 | None | Code21 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Kg | 192.1 | 192.1 | 129.6 | False | None | None | False | None | False | 24896.16 | 0 | | 3367596 | 118486 | None | Code22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Kg | 218.06 | 218.06 | 181.44 | False | None | None | False | None | False | 39564.8064 | 0 | | 3367597 | 118486 | None | Code23 | Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications | Sqm | 2005.41 | 2005.41 | 97.82 | False | None | None | False | None | False | 196169.2062 | 0 | | 3367598 | 118486 | None | Code24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 129.8 | 129.8 | 234.97 | False | None | None | False | None | False | 30499.106 | 0 | | 3367599 | 118486 | None | Code25 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa-terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa-terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 1060.47 | 1060.47 | 107.05 | False | None | None | False | None | False | 113523.3135 | 0 | | 3367600 | 118486 | None | Code26 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in-cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 177.83 | 177.83 | 234.97 | False | None | None | False | None | False | 41784.7151 | 0 | | 3367601 | 118486 | None | Code27 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 115.52 | 115.52 | 249.66 | False | None | None | False | None | False | 28840.7232 | 0 | | 3367602 | 118486 | None | Code28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 216.77 | 216.77 | 20.16 | False | None | None | False | None | False | 4370.0832 | 0 | | 3367603 | 118486 | None | Code29 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: - 3m29410.1.7PVC pipes 110mm dia., 6 kg/sqcm & class 3 with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | m | 533.48 | 533.48 | 6.0 | False | None | None | False | None | False | 3200.88 | 0 | | 3367604 | 118486 | None | Code30 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) withoutcontrol switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient looselength in a wood/PVC round block. complete for each outlet - Short point upto 3Mtr from tapping point to out let via switch box with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Point | 317.42 | 317.42 | 3.0 | False | None | None | False | None | False | 952.26 | 0 | | 3367605 | 118486 | None | Code31 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) withoutcontrol switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient looselength in a wood/PVC round block. complete for each outlet - Medium point above 3Mtr upto 6Mtr from tapping point to out let viaswitch box with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Point | 447.22 | 447.22 | 8.0 | False | None | None | False | None | False | 3577.76 | 0 | | 3367606 | 118486 | None | Code32 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) withoutcontrol switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient looselength in a wood/PVC round block. complete for each outlet - Long point above 6Mtr upto 10Mtr from tapping point to out let viaswitch box with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Point | 654.9 | 654.9 | 8.0 | False | None | None | False | None | False | 5239.2 | 0 | | 3367607 | 118486 | None | Code33 | Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate with requirednos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box - 1 to 2 Module with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 161.66 | 161.66 | 2.0 | False | None | None | False | None | False | 323.32 | 0 | | 3367608 | 118486 | None | Code34 | Supplying 6A flush type socket and 6 A flush type SP switch eithersurface/flush mounting in existing gang box or in 4mm thick plasticsheet and fixing over a flush mounted wooden box and wiring usingnecessary capacity wires as required as per IS 1293 and IS 3854 - 6A 2 Way with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 151.04 | 151.04 | 3.0 | False | None | None | False | None | False | 453.12 | 0 | | 3367609 | 118486 | None | Code35 | Supplying and flush mounting powder coated / galvanized metal boxsuitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall - 10-12 Way with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 376.42 | 376.42 | 2.0 | False | None | None | False | None | False | 752.84 | 0 | | 3367610 | 118486 | None | Code36 | Supplying 4mm thick plastic sheet with necessary nitches forfixing switches, regulators etc, and fixing on existing wooden ormetal box using N.F. screws with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Sqm | 0.48 | 0.48 | 750.0 | False | None | None | False | None | False | 360.0 | 0 | | 3367611 | 118486 | None | Code37 | Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thickconfirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case ofRCC ceiling and RCC wall/ stone structure or rawl plugs in case ofbrick walls and cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws - 19/20 mm dia 2 mm thick with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | m | 81.42 | 81.42 | 96.0 | False | None | None | False | None | False | 7816.32 | 0 | | 3367612 | 118486 | None | Code38 | Supplying & fixing miniature circuit breakers on existing MCBdistribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breakingcapacity of 10K and complete wiring as required confirming to IEC60898 - 6-32 A SP with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 489.7 | 489.7 | 1.0 | False | None | None | False | None | False | 489.7 | 0 | | 3367613 | 118486 | None | Code39 | Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS-694:2010 - 2.5 mm2 with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | m | 49.56 | 49.56 | 150.0 | False | None | None | False | None | False | 7434.0 | 0 | | 3367614 | 118486 | None | Code40 | Supplying and fixing PVC/metal conduit Deep junction box - 32 mm deep Junction box with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 71.98 | 71.98 | 14.0 | False | None | None | False | None | False | 1007.72 | 0 | | 3367615 | 118486 | None | Code41 | Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI 80. Power Input: 220-240V@50/60Hz & Power factor 0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standardelectrical condition - LED light fitting 1 x 4' - 36/40 W with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 1497.42 | 1497.42 | 6.0 | False | None | None | False | None | False | 8984.52 | 0 | | 3367616 | 118486 | None | Code42 | Fixing all types and all capacities of fluorescent /false ceiling / spotlight / CFL / LED fittings indoor on the wall/ ceiling / rafters / girdersusing 23/0.0076" twin twisted PVC insulated wires, required Nos ofround blocks and clamps - On wall/ ceiling / Rafter / Girders with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 143.96 | 143.96 | 6.0 | False | None | None | False | None | False | 863.76 | 0 | | 3367617 | 118486 | None | Code43 | Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bearingsystem - 48" Sweep (1200 mm) Regular model with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed specifications etc., complete and as per directions of the Engineer in charge of the work. | Each | 3521.12 | 3521.12 | 4.0 | False | None | None | False | None | False | 14084.48 | 0 |
|