createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719378297680 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1016624.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 31-07-2024 16:00:00 tenderQueryClose 10-07-2024 16:00:00 technicalBidOpen 02-08-2024 16:00:00 publishedDate 27-06-2024 15:47:01 publishedByPost UHS_EE_BGK publishedByUser KPE13659 - VIJAYBHASKAR M BHAJANTRI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 15-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Vijayabhaskar Bhajantri splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9480696398 tenderSupplierList None
tenderSchedule	createdTs 1719378297760 version 9 createdDate None modifiedDate None tenderNumber UHS/2024-25/BD/WORK_INDENT8 title Construction of PG Girls Hostel (Ground Floor & First Floor) at KRCCH, Arabhavi, Tq. Gokak, Dist. Belagavi description Construction of PG Girls Hostel (Ground Floor & First Floor) at KRCCH, Arabhavi, Tq. Gokak, Dist. Belagavi category WORKS categoryText Works ecv 67774949.95 deptName University of Horticultural Sciences status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 6400 locationName University of Horticultural Sciences Bagalkote provisionalAmount 67774950.0 groupOverheadTotal 0.0 fileNumber UHSB/WORK/08/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719378298000 1 None None Buildings Construction of PG Girls Hostel (Ground Floor & First Floor) at KRCCH, Arabhavi, Tq. Gokak, Dist. Belagavi 67774949.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3354186 118017 None 001 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By manual means. In area of loght jungle ha 176715.0 176715.0 0.2 False None None False None False 35343.0 0 3354187 118017 None 002 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 76.65 76.65 2512.0 False None None False None False 192544.8 0 3354188 118017 None 003 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 214.2 214.2 2034.0 False None None False None False 435682.8 0 3354189 118017 None 004 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.If the height of embankment construction is more than 1.50 m add 5% per m3 for every 1.50 m height or part there off Deduct 5% per m3 if rollers are not used and tamping is done manuallyAdd 8% per m3 for works under foul & sullage situation. Cum 422.1 422.1 1442.0 False None None False None False 608668.2 0 3354190 118017 None 005 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 99.75 99.75 1439.0 False None None False None False 143540.25 0 3354191 118017 None 006 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5466.3 5466.3 263.0 False None None False None False 1437636.9 0 3354192 118017 None 007 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates a) Ground Floor Cum 6014.4 6014.4 38.0 False None None False None False 228547.2 0 3354193 118017 None 008 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates b) First Floor Cum 6074.54 6074.54 2.0 False None None False None False 12149.08 0 3354194 118017 None 009 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates c) terrace floor Cum 6134.68 6134.68 4.0 False None None False None False 24538.72 0 3354195 118017 None 010 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6277.95 6277.95 545.0 False None None False None False 3421482.75 0 3354196 118017 None 011 Addtionalities for Form Work for Isolated Footing @8% Cum 502.23 502.23 340.0 False None None False None False 170758.2 0 3354197 118017 None 012 Addtionalities for Form Work for Combined Footing @3% Cum 188.33 188.33 51.23 False None None False None False 9648.1459 0 3354198 118017 None 013 Addtionalities for Form Work for Columns Upto Plinth Beam @70% Cum 4394.56 4394.56 37.0 False None None False None False 162598.72 0 3354199 118017 None 014 Addtionalities for Form Work for Wall@ 10% Cum 627.79 627.79 57.0 False None None False None False 35784.03 0 3354200 118017 None 015 Addtionalities for Form Work for Plinth Beam @50% Cum 3138.97 3138.97 59.0 False None None False None False 185199.23 0 3354201 118017 None 016 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates a) Ground Floor Cum 6495.3 6495.3 317.6 False None None False None False 2062907.28 0 3354202 118017 None 017 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates b) First Floor Cum 6560.25 6560.25 309.5 False None None False None False 2030397.375 0 3354203 118017 None 018 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates c) Terrace Floor Cum 6625.2 6625.2 31.3 False None None False None False 207368.76 0 3354204 118017 None 019 Additionalities of Formwork for Columns @ 70%- Ground Floor Cum 4546.71 4546.71 42.0 False None None False None False 190961.82 0 3354205 118017 None 020 Additionalities of Formwork for Columns @ 70%- First Floor Cum 4592.17 4592.17 41.0 False None None False None False 188278.97 0 3354206 118017 None 021 Additionalities of Formwork for Columns @ 70%- Terrace Floor Cum 4637.64 4637.64 17.0 False None None False None False 78839.88 0 3354207 118017 None 022 Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%-Ground Floor Cum 3897.18 3897.18 78.0 False None None False None False 303980.04 0 3354208 118017 None 023 Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%- First Floor Cum 3936.15 3936.15 76.0 False None None False None False 299147.4 0 3354209 118017 None 024 Additionalities of Formwork for Roof Beam, Lintel Beam @ 60%- Terrace Floor Cum 3975.12 3975.12 4.0 False None None False None False 15900.48 0 3354210 118017 None 025 Additionalities of Formwork for Roof Slab @ 50%- Ground Floor Cum 3247.65 3247.65 181.1 False None None False None False 588149.415 0 3354211 118017 None 026 Additionalities of Formwork for Roof Slab @ 50%- First Floor Cum 3280.12 3280.12 177.0 False None None False None False 580581.24 0 3354212 118017 None 027 Additionalities of Formwork for Roof Slab @ 50%- Terrace Floor Cum 3312.6 3312.6 10.0 False None None False None False 33126.0 0 3354213 118017 None 028 Additionalities of Formwork for Chajja @ 45% Ground Floor Cum 2922.88 2922.88 10.0 False None None False None False 29228.8 0 3354214 118017 None 029 Additionalities of Formwork for Chajja @ 45% First Floor Cum 2952.11 2952.11 9.94 False None None False None False 29343.9734 0 3354215 118017 None 030 Additionalities of Formwork for Chajja @ 45% Second Floor Cum 2981.34 2981.34 0.4 False None None False None False 1192.536 0 3354216 118017 None 031 Additionalities of Formwork for Staircase @ 45% Ground Floor Cum 2922.88 2922.88 7.0 False None None False None False 20460.16 0 3354217 118017 None 032 Additionalities of Formwork for Staircase @ 45% First Floor Cum 2952.11 2952.11 6.77 False None None False None False 19985.7847 0 3354218 118017 None 033 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) a) Ground floor Kg 96.6 96.6 95015.0 False None None False None False 9178449.0 0 3354219 118017 None 034 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) b) First floor Kg 97.56 97.56 45256.0 False None None False None False 4415175.36 0 3354220 118017 None 035 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) c) terrace floor Kg 98.53 98.53 6576.0 False None None False None False 647933.28 0 3354221 118017 None 036 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 4987.5 4987.5 83.0 False None None False None False 413962.5 0 3354222 118017 None 037 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. a) Ground Floor Sqm 1255.8 1255.8 1158.44 False None None False None False 1454768.952 0 3354223 118017 None 038 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. b) First Floor Sqm 1268.35 1268.35 936.0 False None None False None False 1187175.6 0 3354224 118017 None 039 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. c) terrace floor Sqm 1280.91 1280.91 366.0 False None None False None False 468813.06 0 3354225 118017 None 040 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. a) Ground floor Sqm 987.0 987.0 417.0 False None None False None False 411579.0 0 3354226 118017 None 041 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. b) First floor Sqm 996.87 996.87 379.0 False None None False None False 377813.73 0 3354227 118017 None 042 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. a) Ground Floor Kg 164.85 164.85 4591.0 False None None False None False 756826.35 0 3354228 118017 None 043 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. b) First Floor Kg 166.49 166.49 3919.0 False None None False None False 652474.31 0 3354229 118017 None 044 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. c) Terrace Floor Kg 168.14 168.14 63.0 False None None False None False 10592.82 0 3354230 118017 None 045 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 7058.1 7058.1 121.83 False None None False None False 859888.323 0 3354231 118017 None 046 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) b) First Floor Sqm 7128.68 7128.68 118.85 False None None False None False 847243.618 0 3354232 118017 None 047 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) c) Terrace Floor Sqm 7199.26 7199.26 3.0 False None None False None False 21597.78 0 3354233 118017 None 048 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5113.5 5113.5 49.0 False None None False None False 250561.5 0 3354234 118017 None 049 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) b) First Floor Sqm 5164.63 5164.63 35.0 False None None False None False 180762.05 0 3354235 118017 None 050 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. a) Ground Floor Kg 525.0 525.0 379.0 False None None False None False 198975.0 0 3354236 118017 None 051 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. b) First Floor Kg 530.25 530.25 441.0 False None None False None False 233840.25 0 3354237 118017 None 052 Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x 1.33 mm of 0.759 kg/Mtr, as outer frame with Electro Anodized Paint coated block finishing, using 6mm thick imported glass reflective hard coatedocean blue raw glass with all necessary accesories like ultra glass Silicon sealant of Space tape, Masking tape, Galvanized Anchaor bolt, machine screws, 6mm thick M.S. angle 50mm x 150mm x 6mm M.S. Galvanized L Brackets, structural sealent setting clocks, fasteners, wall connection etc., complete. Sqm 6985.65 6985.65 23.0 False None None False None False 160669.95 0 3354238 118017 None 053 Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x 1.33 mm of 0.759 kg/Mtr, as outer frame with Electro Anodized Paint coated block finishing, using 6mm thick imported glass reflective hard coatedocean blue raw glass with all necessary accesories like ultra glass Silicon sealant of Space tape, Masking tape, Galvanized Anchaor bolt, machine screws, 6mm thick M.S. angle 50mm x 150mm x 6mm M.S. Galvanized L Brackets, structural sealent setting clocks, fasteners, wall connection etc., complete. b) First Floor Sqm 6991.95 6991.95 51.0 False None None False None False 356589.45 0 3354239 118017 None 054 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 115.5 115.5 573.0 False None None False None False 66181.5 0 3354240 118017 None 055 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. b) First Floor Kg 117.81 117.81 763.0 False None None False None False 89889.03 0 3354241 118017 None 056 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 3843.0 3843.0 3.0 False None None False None False 11529.0 0 3354242 118017 None 057 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.. Cum 94912.65 94912.65 5.8 False None None False None False 550493.37 0 3354243 118017 None 058 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 5327.7 5327.7 5.0 False None None False None False 26638.5 0 3354244 118017 None 059 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial Sqm 3617.25 3617.25 97.0 False None None False None False 350873.25 0 3354245 118017 None 060 Providing and fixing flush door shutter made out of solid core block board type, well seasoned,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial b) First Floor Sqm 3653.42 3653.42 74.0 False None None False None False 270353.08 0 3354246 118017 None 061 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial c) Terrace Floor Sqm 3689.59 3689.59 6.0 False None None False None False 22137.54 0 3354247 118017 None 062 Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window, clerestory windows & frames /chowkhat of frame size 65 x 150mm m 840.0 840.0 110.0 False None None False None False 92400.0 0 3354248 118017 None 063 Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window, clerestory windows & frames /chowkhat of frame size 65 x 150mm b) First Floor m 848.4 848.4 104.0 False None None False None False 88233.6 0 3354249 118017 None 064 Providing & fixing Factory made 100% carpenter friendly ready to use Single Solid Plain Wood Polymer Composite (WPC) flush shutter of 35mm thickness which is anti termite and having high water absorption property. The cost includes cost of materials, transportation, labour and fixing charges. Sqm 4235.7 4235.7 36.0 False None None False None False 152485.2 0 3354250 118017 None 065 Providing & fixing Factory made 100% carpenter friendly ready to use Single Solid Plain Wood Polymer Composite (WPC) flush shutter of 35mm thickness which is anti termite and having high water absorption property. The cost includes cost of materials, transportation, labour and fixing charges. b) First Floor Sqm 4278.05 4278.05 34.0 False None None False None False 145453.7 0 3354251 118017 None 066 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1555.05 1555.05 37.0 False None None False None False 57536.85 0 3354252 118017 None 067 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. b) First Floor Nos 1570.6 1570.6 26.0 False None None False None False 40835.6 0 3354253 118017 None 068 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. c) Terrace Floor Nos 1586.15 1586.15 2.0 False None None False None False 3172.3 0 3354254 118017 None 069 Wardrobe shutter providing and fixing 18 mm thick openable shutters for wardrobe fixed with frame of size of 125mm x 19mm ,using 19mm thick BWP grade ply wood with 25mm x6mm thick plain teak wood beading,1.5mm thick lipping, finished with approved 1.5mm lamination sheet of approved clour ,shade and quality on all exposed sufaces and internal surface, including cost of brass fittings, parliametary hinges ,C handles, tower bolts, approved brand lock, adhesives ,synthetic resins, nails, screws etc, including cost of all materials ,labour charges ,complete as per specification. a) Ground Floor Sqm 6565.0 6565.0 255.0 False None None False None False 1674075.0 0 3354255 118017 None 070 Providing and fixing bright finished brass door latch/aldrop with necessary screws etc., complete Nos 873.6 873.6 36.0 False None None False None False 31449.6 0 3354256 118017 None 071 Providing and fixing bright finished brass door latch/aldrop with necessary screws etc., complete b) First Floor Nos 882.33 882.33 26.0 False None None False None False 22940.58 0 3354257 118017 None 072 Providing and fixing bright finished brass door latch/aldrop with necessary screws etc., complete c) Terrace Floor Nos 891.07 891.07 2.0 False None None False None False 1782.14 0 3354258 118017 None 073 Providing supply and fixing SS 304 Aldrop - 200mm x 16mm for door shutters including SS screws cost of materials, labour etc., complete as per specifications. Make: GODREJ / 8539 Nos 2099.0 2099.0 1.0 False None None False None False 2099.0 0 3354259 118017 None 074 Providing supply and fixing Cylindrical Lock-SS-Key less with 5 years warranty suitable for Flush door shutters including cost of materials, labour etc., complete as per specifications. Make: GODREJ / 9843 Nos 1348.0 1348.0 65.0 False None None False None False 87620.0 0 3354260 118017 None 075 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 183.75 183.75 82.0 False None None False None False 15067.5 0 3354261 118017 None 076 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete b) First Floor Nos 185.58 185.58 58.0 False None None False None False 10763.64 0 3354262 118017 None 077 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete c) Terrace Floor Nos 187.42 187.42 4.0 False None None False None False 749.68 0 3354263 118017 None 078 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 114.45 114.45 41.0 False None None False None False 4692.45 0 3354264 118017 None 079 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. B) First Floor Nos 115.59 115.59 29.0 False None None False None False 3352.11 0 3354265 118017 None 080 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. C) Terrace Floor Nos 116.73 116.73 2.0 False None None False None False 233.46 0 3354266 118017 None 081 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm Nos 86.1 86.1 123.0 False None None False None False 10590.3 0 3354267 118017 None 082 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm b) First Floor Nos 86.96 86.96 87.0 False None None False None False 7565.52 0 3354268 118017 None 083 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm c) Terrace Floor Nos 87.82 87.82 6.0 False None None False None False 526.92 0 3354269 118017 None 084 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 116.55 116.55 82.0 False None None False None False 9557.1 0 3354270 118017 None 085 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete b) First Floor Nos 117.71 117.71 58.0 False None None False None False 6827.18 0 3354271 118017 None 086 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete c) Terrace Floor Nos 118.88 118.88 4.0 False None None False None False 475.52 0 3354272 118017 None 087 Providing supply and fixing MS Holdfast of size 260mm x 25mm x 5mm thk for fixing door frame to walls including cost of materials, cutting masonry pockets for receiving MS Holdfast, one coat of shop primer , concrete filling of pockets, disposal of debris,keeping the area clean,curing, labour etc., complete as per specifications of vendor and as per architects details. Nos 45.0 45.0 390.0 False None None False None False 17550.0 0 3354273 118017 None 088 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. b) First Floor Sqm 790.07 790.07 19.0 False None None False None False 15011.33 0 3354274 118017 None 089 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. c) Terrace Floor Sqm 797.89 797.89 1247.0 False None None False None False 994968.83 0 3354275 118017 None 090 Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface /Chajjas /Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. b) First Floor Sqm 609.78 609.78 219.0 False None None False None False 133541.82 0 3354276 118017 None 091 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2117.85 2117.85 32.0 False None None False None False 67771.2 0 3354277 118017 None 092 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates b) First Floor Cum 6074.54 6074.54 13.0 False None None False None False 78969.02 0 3354278 118017 None 093 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates c) Terrace Floor Cum 6134.68 6134.68 123.0 False None None False None False 754565.64 0 3354279 118017 None 094 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. * Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3013.5 3013.5 608.0 False None None False None False 1832208.0 0 3354280 118017 None 095 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. * Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. b) First Floor Sqm 3043.63 3043.63 379.0 False None None False None False 1153535.77 0 3354281 118017 None 096 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 282.45 282.45 92.0 False None None False None False 25985.4 0 3354282 118017 None 097 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. B) First Floor m 285.27 285.27 75.0 False None None False None False 21395.25 0 3354283 118017 None 098 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of tiles 800x800 Sqm 1457.4 1457.4 427.0 False None None False None False 622309.8 0 3354284 118017 None 099 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of tiles 800x800 b) First Floor Sqm 1471.97 1471.97 578.0 False None None False None False 850798.66 0 3354285 118017 None 100 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Sqm 635.25 635.25 170.0 False None None False None False 107992.5 0 3354286 118017 None 101 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. b) First Floor Sqm 641.6 641.6 157.0 False None None False None False 100731.2 0 3354287 118017 None 102 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1088.85 1088.85 465.0 False None None False None False 506315.25 0 3354288 118017 None 103 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. b) First Floor Sqm 1099.73 1099.73 415.0 False None None False None False 456387.95 0 3354289 118017 None 104 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. Sqm 2502.15 2502.15 16.0 False None None False None False 40034.4 0 3354290 118017 None 105 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. b) First Floor Sqm 2527.17 2527.17 5.0 False None None False None False 12635.85 0 3354291 118017 None 106 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1295.7 1295.7 135.0 False None None False None False 174919.5 0 3354292 118017 None 107 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. b) First Floor Sqm 1308.65 1308.65 107.0 False None None False None False 140025.55 0 3354293 118017 None 108 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Sqm 1940.4 1940.4 45.0 False None None False None False 87318.0 0 3354294 118017 None 109 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. b) First Floor Sqm 1959.8 1959.8 48.0 False None None False None False 94070.4 0 3354295 118017 None 110 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. c) Terrace Floor Sqm 1979.2 1979.2 19.0 False None None False None False 37604.8 0 3354296 118017 None 111 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. c) Terrace Floor Sqm 1202.25 1202.25 30.0 False None None False None False 36067.5 0 3354297 118017 None 112 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Internal wall plastering Sqm 260.4 260.4 2618.0 False None None False None False 681727.2 0 3354298 118017 None 113 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Internal wall plastering b) First Floor Sqm 263.0 263.0 2293.0 False None None False None False 603059.0 0 3354299 118017 None 114 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Internal wall plastering c) Terrace Floor Sqm 265.6 265.6 57.0 False None None False None False 15139.2 0 3354300 118017 None 115 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Rough Plastering Sqm 308.7 308.7 465.0 False None None False None False 143545.5 0 3354301 118017 None 116 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Rough Plastering b) First Floor Sqm 311.78 311.78 415.0 False None None False None False 129388.7 0 3354302 118017 None 117 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External wall plastering Sqm 322.35 322.35 1341.0 False None None False None False 432271.35 0 3354303 118017 None 118 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External wall plastering b) First Floor Sqm 325.57 325.57 1279.0 False None None False None False 416404.03 0 3354304 118017 None 119 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External wall plastering c) Terrace Floor Sqm 328.79 328.79 877.0 False None None False None False 288348.83 0 3354305 118017 None 120 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 181.65 181.65 1256.0 False None None False None False 228152.4 0 3354306 118017 None 121 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. b) First Floor Sqm 183.46 183.46 1234.0 False None None False None False 226389.64 0 3354307 118017 None 122 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. c) Terrace Floor Sqm 185.28 185.28 66.0 False None None False None False 12228.48 0 3354308 118017 None 123 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) m 40.0 40.0 2352.56 False None None False None False 94102.4 0 3354309 118017 None 124 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) b) First Floor m 40.0 40.0 2341.72 False None None False None False 93668.8 0 3354310 118017 None 125 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) c) Terrace Floor m 40.0 40.0 609.0 False None None False None False 24360.0 0 3354311 118017 None 126 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (a) Ground Floor Sqm 87.15 87.15 3874.0 False None None False None False 337619.1 0 3354312 118017 None 127 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. b) First Floor Sqm 88.02 88.02 3527.0 False None None False None False 310446.54 0 3354313 118017 None 128 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. c) Terrace Floor Sqm 88.89 88.89 122.0 False None None False None False 10844.58 0 3354314 118017 None 129 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. & Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Internal Wall Paint Sqm 141.75 141.75 3874.0 False None None False None False 549139.5 0 3354315 118017 None 130 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. & Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Internal Wall Paint b) First Floor Sqm 143.16 143.16 3527.0 False None None False None False 504925.32 0 3354316 118017 None 131 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. & Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Internal Wall Paint c) Terrace Floor Sqm 144.58 144.58 122.0 False None None False None False 17638.76 0 3354317 118017 None 132 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. & Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge External Wall Paint Sqm 111.3 111.3 1296.0 False None None False None False 144244.8 0 3354318 118017 None 133 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. & Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge External Wall Paint b) First Floor Sqm 112.41 112.41 1231.0 False None None False None False 138376.71 0 3354319 118017 None 134 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. & Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge External Wall Paint c) Terrace Floor Sqm 113.52 113.52 877.0 False None None False None False 99557.04 0 3354320 118017 None 135 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. Sqm 149.1 149.1 847.0 False None None False None False 126287.7 0 3354321 118017 None 136 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Wood Paint Sqm 110.25 110.25 108.0 False None None False None False 11907.0 0 3354322 118017 None 137 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Wood Paint b) First Floor Sqm 111.35 111.35 72.0 False None None False None False 8017.2 0 3354323 118017 None 138 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Wood Paint c) Terrace Floor Sqm 112.45 112.45 5.0 False None None False None False 562.25 0 3354324 118017 None 139 Providing drip moulding with plastering of 25mmx 100mm in cement plaster 1:4 with rendering for projected surface ,provding and removing the cost of scaffolding inculding cost of material , labours curing as per specifications m 25.0 25.0 358.0 False None None False None False 8950.0 0 3354325 118017 None 140 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 76.65 76.65 92.0 False None None False None False 7051.8 0 3354326 118017 None 141 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 214.2 214.2 48.0 False None None False None False 10281.6 0 3354327 118017 None 142 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5466.3 5466.3 3.52 False None None False None False 19241.376 0 3354328 118017 None 143 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates a) Ground Floor Cum 6014.4 6014.4 0.59 False None None False None False 3548.496 0 3354329 118017 None 144 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6277.95 6277.95 16.89 False None None False None False 106034.5755 0 3354330 118017 None 145 Addtionalities for Form Work for Combined Footing @3% Cum 188.33 188.33 5.27 False None None False None False 992.4991 0 3354331 118017 None 146 Addtionalities for Form Work for Wall@ 10% Cum 627.79 627.79 8.03 False None None False None False 5041.1537 0 3354332 118017 None 147 Addtionalities for Form Work for Roof Beam, Lintel Beam @ 60% Cum 3766.77 3766.77 0.42 False None None False None False 1582.0434 0 3354333 118017 None 148 Addtionalities for Form Work for Roof Slab @ 50% Cum 3138.97 3138.97 3.17 False None None False None False 9950.5349 0 3354334 118017 None 149 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) a) Ground floor Kg 96.6 96.6 1959.43 False None None False None False 189280.938 0 3354335 118017 None 150 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1255.8 1255.8 6.41 False None None False None False 8049.678 0 3354336 118017 None 151 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work.If the height of embankment construction is more than 1.50 m add 5% per m3 for every 1.50 m height or part there off Deduct 5% per m3 if rollers are not used and tamping is done manuallyAdd 8% per m3 for works under foul & sullage situation. Cum 422.1 422.1 29.89 False None None False None False 12616.569 0 3354337 118017 None 152 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 275.1 275.1 11.84 False None None False None False 3257.184 0 3354338 118017 None 153 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 308.7 308.7 100.29 False None None False None False 30959.523 0 3354339 118017 None 154 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 477.75 477.75 100.29 False None None False None False 47913.5475 0 3354340 118017 None 155 Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour, curing etc., complete as per specifications. Nos 300.0 300.0 8.0 False None None False None False 2400.0 0 3354341 118017 None 156 Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank. Nos 5500.0 5500.0 4.0 False None None False None False 22000.0 0 3354342 118017 None 157 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 76.65 76.65 150.98 False None None False None False 11572.617 0 3354343 118017 None 158 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 214.2 214.2 57.0 False None None False None False 12209.4 0 3354344 118017 None 159 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5466.3 5466.3 6.13 False None None False None False 33508.419 0 3354345 118017 None 160 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6277.95 6277.95 37.5 False None None False None False 235423.125 0 3354346 118017 None 161 Addtionalities for Form Work for Combined Footing @3% Cum 188.33 188.33 12.0 False None None False None False 2259.96 0 3354347 118017 None 162 Addtionalities for Form Work for Wall@ 10% Cum 627.79 627.79 20.0 False None None False None False 12555.8 0 3354348 118017 None 163 Addtionalities for Form Work for Roof Beam, Lintel Beam @ 60% Cum 3766.77 3766.77 0.77 False None None False None False 2900.4129 0 3354349 118017 None 164 Addtionalities for Form Work for Roof Slab @ 50% Cum 3138.97 3138.97 4.69 False None None False None False 14721.7693 0 3354350 118017 None 165 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) a) Ground floor Kg 96.6 96.6 4478.0 False None None False None False 432574.8 0 3354351 118017 None 166 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 181.65 181.65 32.0 False None None False None False 5812.8 0 3354352 118017 None 167 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 308.7 308.7 157.88 False None None False None False 48737.556 0 3354353 118017 None 168 Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank Nos 5500.0 5500.0 2.0 False None None False None False 11000.0 0 3354354 118017 None 169 Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour, curing etc., complete as per specifications. Nos 300.0 300.0 5.0 False None None False None False 1500.0 0 3354355 118017 None 170 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates a) Ground Floor Cum 6014.4 6014.4 2.4 False None None False None False 14434.56 0 3354356 118017 None 171 Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 477.75 477.75 157.88 False None None False None False 75427.17 0 3354357 118017 None 172 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.9 144.9 157.88 False None None False None False 22876.812 0 3354358 118017 None 173 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 76.65 76.65 315.32 False None None False None False 24169.278 0 3354359 118017 None 174 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 214.2 214.2 243.0 False None None False None False 52050.6 0 3354360 118017 None 175 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 99.75 99.75 268.0 False None None False None False 26733.0 0 3354361 118017 None 176 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5466.3 5466.3 26.0 False None None False None False 142123.8 0 3354362 118017 None 177 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates a) Ground Floor Cum 6014.4 6014.4 6.5 False None None False None False 39093.6 0 3354363 118017 None 178 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6277.95 6277.95 29.0 False None None False None False 182060.55 0 3354364 118017 None 179 Addtionalities for Form Work for Isolated Footing @8% Cum 502.23 502.23 22.0 False None None False None False 11049.06 0 3354365 118017 None 180 Addtionalities for Form Work for Columns @ 70% Cum 4394.56 4394.56 7.0 False None None False None False 30761.92 0 3354366 118017 None 181 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6495.3 6495.3 22.0 False None None False None False 142896.6 0 3354367 118017 None 182 Addtionalities for Form Work for Plinth Beam @ 50% Cum 3247.65 3247.65 10.0 False None None False None False 32476.5 0 3354368 118017 None 183 Addtionalities for Form Work for Columns @ 70% Cum 4394.56 4394.56 12.0 False None None False None False 52734.72 0 3354369 118017 None 184 Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting. bending. placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) a) Ground floor Kg 96.6 96.6 5280.0 False None None False None False 510048.0 0 3354370 118017 None 185 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5619.6 5619.6 73.0 False None None False None False 410230.8 0 3354371 118017 None 186 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 208.95 208.95 139.0 False None None False None False 29044.05 0 3354372 118017 None 187 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1255.8 1255.8 340.2 False None None False None False 427223.16 0 3354373 118017 None 188 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 113.4 113.4 901.0 False None None False None False 102173.4 0 3354374 118017 None 189 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External wall plastering Sqm 241.5 241.5 864.0 False None None False None False 208656.0 0 3354375 118017 None 190 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. & Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge External Wall Paint Sqm 111.3 111.3 864.0 False None None False None False 96163.2 0 3354376 118017 None 191 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 149.1 149.1 18.02 False None None False None False 2686.782 0 3354377 118017 None 192 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. 19.27.1 G.S. Sheet Sqm 87.15 87.15 423.16 False None None False None False 36878.394 0 3354378 118017 None 193 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. 19.14.1 Of sectional area 40 square centimeters and above Cum 2341.5 2341.5 8.0 False None None False None False 18732.0 0 3354379 118017 None 194 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge. In cement mortor Cum 1354.5 1354.5 42.0 False None None False None False 56889.0 0 3354380 118017 None 195 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 804.3 804.3 143.0 False None None False None False 115014.9 0 3354381 118017 None 196 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar Cum 828.45 828.45 30.0 False None None False None False 24853.5 0 3354382 118017 None 197 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Sqm 40.95 40.95 72.45 False None None False None False 2966.8275 0 3354383 118017 None 198 SANITARY FIXTURES: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Unit 2655.45 2655.45 24.0 False None None False None False 63730.8 0 3354384 118017 None 199 Providing and fixing white vitreous china clay,water closet european type(pedestal ,type P trap )with black solid plastic seat and lid,CP brass hinges,rubber buffer,10ltrs white glazed/vitreous china clay low level,flushing cistern(all are approved make) with fittings,CI/MS brackets,40mmdiameter flush bend with fittings and clamps,overflow arrangement with specials and 25mm mosquito proof coupling of approved design,painting of fittings and brackets,cutting and making good the wall and floor wherever required, including cost of materials,labour complete as per specifications. Unit 12000.0 12000.0 9.0 False None None False None False 108000.0 0 3354385 118017 None 200 Providing and fixing CP. Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete.Make : Hindware Nos 2664.0 2664.0 23.0 False None None False None False 61272.0 0 3354386 118017 None 201 Providing and fixing in posiion brass bib cock of approved quality 20mm normal bore including cost of materials, labour and HOM of Equipments with all leads complete as per specifications. Each 362.25 362.25 28.0 False None None False None False 10143.0 0 3354387 118017 None 202 Providing and fixing in position brass stop cock of approved quality 20mm nominal bore inlcuding cost of all materials, labour, HOM of equipments with all leads complete as per specifications. Each 379.5 379.5 74.0 False None None False None False 28083.0 0 3354388 118017 None 203 Providing and fixing 600x450mm bevelled edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, including cost of materials, labour complete as per specifications. Unit 1019.55 1019.55 24.0 False None None False None False 24469.2 0 3354389 118017 None 204 Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good the wall. Make : JAQUAR Model No- ACN -1131N Nos 678.0 678.0 44.0 False None None False None False 29832.0 0 3354390 118017 None 205 Providing and fixing 2 in 1 Wall Mixer with complete fitting comprising of with provision for with long bend spout for bucket with wall flange complete. Nos 5100.0 5100.0 24.0 False None None False None False 122400.0 0 3354391 118017 None 206 Providing and fixing shower head Arm with rose long bend free flow with fitting wall flange complete, including teflon with fixing. Nos 2316.0 2316.0 24.0 False None None False None False 55584.0 0 3354392 118017 None 207 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Nos 399.0 399.0 24.0 False None None False None False 9576.0 0 3354393 118017 None 208 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm Nos 5218.5 5218.5 2.0 False None None False None False 10437.0 0 3354394 118017 None 209 Supplying & fixing of CP sink cock with swivel spout with wall flange etc complete. Nos 2556.0 2556.0 2.0 False None None False None False 5112.0 0 3354395 118017 None 210 Supplying, Installing in position C P grab bar with pair of fixing screws and fixing material complete. Make : Jaquar Model No- AHS-1507 Nos 1975.0 1975.0 1.0 False None None False None False 1975.0 0 3354396 118017 None 211 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Unit 5784.45 5784.45 14.0 False None None False None False 80982.3 0 3354397 118017 None 212 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/sqcm & class 5 m 100.8 100.8 60.0 False None None False None False 6048.0 0 3354398 118017 None 213 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 5 m 160.65 160.65 4.6 False None None False None False 738.99 0 3354399 118017 None 214 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 5 m 220.5 220.5 203.0 False None None False None False 44761.5 0 3354400 118017 None 215 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 5 m 441.0 441.0 174.0 False None None False None False 76734.0 0 3354401 118017 None 216 Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete.. Nos 420.0 420.0 66.0 False None None False None False 27720.0 0 3354402 118017 None 217 Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors. Nos 612.0 612.0 2.0 False None None False None False 1224.0 0 3354403 118017 None 218 Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete. Nos 282.0 282.0 68.0 False None None False None False 19176.0 0 3354404 118017 None 219 Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all leads and lifts complete Size : 150 mm dia Nos 720.0 720.0 30.0 False None None False None False 21600.0 0 3354405 118017 None 220 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 20 mm dia pipe nominal OD pipes m 391.65 391.65 246.0 False None None False None False 96345.9 0 3354406 118017 None 221 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 25 mm dia pipe nominal OD pipes m 499.8 499.8 120.0 False None None False None False 59976.0 0 3354407 118017 None 222 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 32 mm dia pipe nominal OD pipes m 583.8 583.8 60.0 False None None False None False 35028.0 0 3354408 118017 None 223 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 362.25 362.25 5.0 False None None False None False 1811.25 0 3354409 118017 None 224 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 554.4 554.4 6.0 False None None False None False 3326.4 0 3354410 118017 None 225 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 605.85 605.85 6.0 False None None False None False 3635.1 0 3354411 118017 None 226 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work) 20 mm dia pipe nominal OD pipes m 225.75 225.75 136.0 False None None False None False 30702.0 0 3354412 118017 None 227 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work) 25 mm dia pipe nominal OD pipes m 313.95 313.95 175.0 False None None False None False 54941.25 0 3354413 118017 None 228 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work) 32mm dia pipe nominal OD pipes m 375.9 375.9 263.0 False None None False None False 98861.7 0 3354414 118017 None 229 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work) 40mm dia pipe nominal OD pipes m 492.45 492.45 139.0 False None None False None False 68450.55 0 3354415 118017 None 230 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work) 50 mm dia pipe nominal OD pipes m 737.1 737.1 120.0 False None None False None False 88452.0 0 3354416 118017 None 231 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 378.0 378.0 12.0 False None None False None False 4536.0 0 3354417 118017 None 232 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 362.25 362.25 6.0 False None None False None False 2173.5 0 3354418 118017 None 233 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 554.4 554.4 8.0 False None None False None False 4435.2 0 3354419 118017 None 234 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 40mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications Each 715.05 715.05 6.0 False None None False None False 4290.3 0 3354420 118017 None 235 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 50mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Make: Zoloto Each 875.7 875.7 4.0 False None None False None False 3502.8 0 3354421 118017 None 236 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. l 8.65 8.65 10000.0 False None None False None False 86500.0 0 3354422 118017 None 237 Supplying & fixing suction Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia Nos 4344.0 4344.0 2.0 False None None False None False 8688.0 0 3354423 118017 None 238 Supplying , fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats (Round or Square) as per approved design The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified. 150 x 150mm PVC Grating Nos 830.0 830.0 10.0 False None None False None False 8300.0 0 3354424 118017 None 239 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN 4, 75mm dia. m 214.2 214.2 258.0 False None None False None False 55263.6 0 3354425 118017 None 240 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN 8, 110mm dia. m 284.55 284.55 340.0 False None None False None False 96747.0 0 3354426 118017 None 241 Pipes of Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:SN 8, 160mm dia. m 583.8 583.8 200.0 False None None False None False 116760.0 0 3354427 118017 None 242 SW Gully trap, P Type, 100mm x 150 mm Each 162.75 162.75 12.0 False None None False None False 1953.0 0 3354428 118017 None 243 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Nos 9043.65 9043.65 14.0 False None None False None False 126611.1 0 3354429 118017 None 244 Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 m 5922.78 5922.78 10.0 False None None False None False 59227.8 0 3354430 118017 None 245 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. Cum 203.7 203.7 253.28 False None None False None False 51593.136 0 3354431 118017 None 246 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 127.05 127.05 253.28 False None None False None False 32179.224 0 3354432 118017 None 247 DOMESTIC WATER TRANSFAR PUMP Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set . (1 working & standby) domestic water pumps for pumping domestic water from U.G. sump to over head water tank, with all necessary arrangements to operate on 3HP 50 HZ, 440V AC supply fitted on a common base frame accessories to lift the pump during maintenance , necessary power connections, the supplier shall include the control panel and wiring from TPN switch to control panel and wiring upto pumps, the control panel comprising of O/L relays, single phase preventor,separate overload trip and relayset, ON/OFF/TRIP indicating lamps,start/stop push buttons, With liquid level controlers, etc., complete as complete. Duty of the Pump 4 cum per hour at 20 TO 25 m head Make : Kirloskar/ suguna/texmo/CRI two set industrial type electronic automatic liquid level controllers, with stainless steel probes / sensors. Nos 19807.2 19807.2 2.0 False None None False None False 39614.4 0 3354433 118017 None 248 Providing and fixing in position 32 mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Nos 676.2 676.2 2.0 False None None False None False 1352.4 0 3354434 118017 None 249 Providing and fixing in position 40 mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Nos 803.25 803.25 2.0 False None None False None False 1606.5 0 3354435 118017 None 250 Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including Supplying precast RCC perforated top slab in 1:2:4 Mix (1 cement: 2 coarse coarse sand: 8 graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM 1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement & making benching and channelling in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications.Inside size of 600 x 600mm & depth not exceeding 600 x 600mm including Supplying 450 x 450mm RCC cover with MS L angle frame. Nos 6920.4 6920.4 10.0 False None None False None False 69204.0 0 3354436 118017 None 251 Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs etc. The quoted rate shall include earth work excavation, back filling, removing excess earth and making good the floor. The percolation well harvest pit shall be constructed as per the detail drawings and specification shall consists of: Allernate layers of brick bats, activated charcoal, gravel, pebbles and toped with fine sand for good infiltration. 3 Nos. bore holes of 160 mm dia from the bottom of percolation pit for a depth of 6m, drilled by using auger manually.Bore hole to be filled with medium sized pebbles to provide mechanical strength to the holes and enhance infiltration. Rate quoted shall be inclusive of earth work excavation, back filling, removing of excess earth as per the instructions of engineer - in charge. Nos 27883.0 27883.0 4.0 False None None False None False 111532.0 0 3354437 118017 None 252 Supply and fixing 600mm long puddle flange consisting of 6mm thick welded MS plate, flanges of sutible size property fixed in walls of water tanks as per specifications and approved drawings of following diameters. A) 32 mm dia Nos 696.0 696.0 2.0 False None None False None False 1392.0 0 3354438 118017 None 253 40 mm dia Nos 828.0 828.0 2.0 False None None False None False 1656.0 0 3354439 118017 None 254 50 mm dia Nos 1044.0 1044.0 2.0 False None None False None False 2088.0 0 3354440 118017 None 255 65 mm dia Nos 1398.0 1398.0 2.0 False None None False None False 2796.0 0 3354441 118017 None 256 Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Material Stainless steel 304-L Grade with Aluminium Stucco cladding made of High quality PUF insulation to minimizes heat loss and hold water Temperature upto 72 Hrs...with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. Fitted with Sacrificial Anode 500 L - 34 nos Tubes (Supreme solar/solarhitech/suntech/Sudarshan Saur/Tata BP Solar/or equivalent) cafacity 500 Leters Nos 75000.0 75000.0 6.0 False None None False None False 450000.0 0 3354442 118017 None 257 LT ELECTRICAL WORKS PVC CONDUITS & ITS ACCESSORIES Open conduit System Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. a) 19/20 mm dia 2mm thick (plasto/A One Plast/Supreme/ or Equivalent) Mtr 68.0 68.0 450.0 False None None False None False 30600.0 0 3354443 118017 None 258 Open conduit System Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. b) 25mm dia 2mm thick (plasto/A One Plast/Supreme/ or Equivalent) Mtr 80.0 80.0 1500.0 False None None False None False 120000.0 0 3354444 118017 None 259 Open conduit System Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. c) 32mm dia 2.5mm thick (plasto/A One Plast/Supreme/ or Equivalent) Mtr 110.0 110.0 50.0 False None None False None False 5500.0 0 3354445 118017 None 260 Concealed conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running before concreting the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. a) 19/20 mm dia 2mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 61.0 61.0 700.0 False None None False None False 42700.0 0 3354446 118017 None 261 Concealed conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running before concreting the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. b) 25mm dia 2mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 70.0 70.0 5200.0 False None None False None False 364000.0 0 3354447 118017 None 262 Concealed conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and running before concreting the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. c) 32mm dia 2.5mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 93.0 93.0 400.0 False None None False None False 37200.0 0 3354448 118017 None 263 Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary a) 19/20 mm dia 2mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 75.0 75.0 125.0 False None None False None False 9375.0 0 3354449 118017 None 264 Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary b) 25mm dia 2mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 80.0 80.0 1450.0 False None None False None False 116000.0 0 3354450 118017 None 265 Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary c) 32mm dia 2.5mm thick (Bajaj/A One Plast/Supreme/ or Equivalent) Mtr 105.0 105.0 60.0 False None None False None False 6300.0 0 3354451 118017 None 266 Supplying and fixing PVC/metal conduit deep junction box. a) 19/20mm deep junction box Each 49.0 49.0 60.0 False None None False None False 2940.0 0 3354452 118017 None 267 Supplying and fixing PVC/metal conduit deep junction box. b) 25mm deep junction box Each 51.0 51.0 300.0 False None None False None False 15300.0 0 3354453 118017 None 268 Supplying and fixing PVC/metal conduit deep junction box. c) 32mm deep junction box Each 69.0 69.0 30.0 False None None False None False 2070.0 0 3354454 118017 None 269 Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete. a) upto 50mm conduit in CC Floor Mtr 62.0 62.0 75.0 False None None False None False 4650.0 0 3354455 118017 None 270 Supplying and fixing Metal fan box with round hook. Nos 163.0 163.0 125.0 False None None False None False 20375.0 0 3354456 118017 None 271 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.5Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box Point 251.0 251.0 400.0 False None None False None False 100400.0 0 3354457 118017 None 272 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.5Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. b) Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch box Point 361.0 361.0 160.0 False None None False None False 57760.0 0 3354458 118017 None 273 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.5Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 375.0 375.0 75.0 False None None False None False 28125.0 0 3354459 118017 None 274 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.5Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 542.0 542.0 60.0 False None None False None False 32520.0 0 3354460 118017 None 275 Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.5Sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS 694: and latest amendments) with out control switch shall be fixed on the existing plastic sheet / gland box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. e) Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches box Point 979.0 979.0 20.0 False None None False None False 19580.0 0 3354461 118017 None 276 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. a) 1.5 sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 26.0 26.0 2800.0 False None None False None False 72800.0 0 3354462 118017 None 277 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. b) 2.5 sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 40.0 40.0 7000.0 False None None False None False 280000.0 0 3354463 118017 None 278 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. c) 4 sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 59.0 59.0 3600.0 False None None False None False 212400.0 0 3354464 118017 None 279 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. d) 6 sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 87.0 87.0 1000.0 False None None False None False 87000.0 0 3354465 118017 None 280 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-694: confirming to latest amendments. e) 10 sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 157.0 157.0 600.0 False None None False None False 94200.0 0 3354466 118017 None 281 Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and sheathed suitable for working voltage upto 1100volts as per IS-694:1990. a) 4Cx2.5Sqmm (Havells/Anchor/V-Guard/ or Equivalent) Mtr 141.0 141.0 250.0 False None None False None False 35250.0 0 3354467 118017 None 282 SWITCHES, SOCKETS & ACCESSORIES Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall a) 1-3 Way (Legrand/Anchor/ABB/ or Equivalent) Each 123.0 123.0 250.0 False None None False None False 30750.0 0 3354468 118017 None 283 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall b) 4 Way (Legrand/Anchor/ABB/ or Equivalent) Each 138.0 138.0 230.0 False None None False None False 31740.0 0 3354469 118017 None 284 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall c) 6 Way (Legrand/Anchor/ABB/ or Equivalent) Each 212.0 212.0 30.0 False None None False None False 6360.0 0 3354470 118017 None 285 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall d) 8 Way (Legrand/Anchor/ABB/ or Equivalent) Each 250.0 250.0 20.0 False None None False None False 5000.0 0 3354471 118017 None 286 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall e) 10-12 Way (Legrand/Anchor/ABB/ or Equivalent) Each 325.0 325.0 10.0 False None None False None False 3250.0 0 3354472 118017 None 287 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall f) 16-18 Way (Legrand/Anchor/ABB/ or Equivalent) Each 354.0 354.0 10.0 False None None False None False 3540.0 0 3354473 118017 None 288 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. a) 1 to 3 Module (Legrand/Anchor/ABB/ or Equivalent) Each 152.0 152.0 250.0 False None None False None False 38000.0 0 3354474 118017 None 289 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. b) 4 Module (Legrand/Anchor/ABB/ or Equivalent) Each 175.0 175.0 230.0 False None None False None False 40250.0 0 3354475 118017 None 290 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. c) 6 Module (Legrand/Anchor/ABB/ or Equivalent) Each 244.0 244.0 30.0 False None None False None False 7320.0 0 3354476 118017 None 291 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. d) 8 Module (Legrand/Anchor/ABB/ or Equivalent) Each 302.0 302.0 20.0 False None None False None False 6040.0 0 3354477 118017 None 292 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. e) 10-12 Module (Legrand/Anchor/ABB/ or Equivalent) Each 363.0 363.0 10.0 False None None False None False 3630.0 0 3354478 118017 None 293 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ metal PVC box. f) 16-18 Module (Legrand/Anchor/ABB/ or Equivalent) Each 403.0 403.0 10.0 False None None False None False 4030.0 0 3354479 118017 None 294 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 a) 6 Amps one way (Legrand/Anchor/ABB/ or Equivalent) Each 88.0 88.0 900.0 False None None False None False 79200.0 0 3354480 118017 None 295 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 b) 6 Amps Two way (Legrand/Anchor/ABB/ or Equivalent) Each 152.0 152.0 20.0 False None None False None False 3040.0 0 3354481 118017 None 296 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 c) 6Amps 3way socket. (Legrand/Anchor/ABB/ or Equivalent) Each 162.0 162.0 200.0 False None None False None False 32400.0 0 3354482 118017 None 297 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 d) Stepped fan regulator (Legrand/Anchor/ABB/ or Equivalent) Each 313.0 313.0 125.0 False None None False None False 39125.0 0 3354483 118017 None 298 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 e) 32A,DP,Switch (Legrand/Anchor/ABB/ or Equivalent) Each 375.0 375.0 10.0 False None None False None False 3750.0 0 3354484 118017 None 299 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 f) 16Amps one way switch (Legrand/Anchor/ABB/ or Equivalent) Each 249.0 249.0 50.0 False None None False None False 12450.0 0 3354485 118017 None 300 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293 g) 6/16Amps universal socket (Legrand/Anchor/ABB/ or Equivalent) Each 249.0 249.0 55.0 False None None False None False 13695.0 0 3354486 118017 None 301 CONTROL SWITCH GEARS & ACCESSORIES Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/single phase motor upto 5 HP. (ABB/L&T/siemens/or Equivalent) Each 1490.0 1490.0 3.0 False None None False None False 4470.0 0 3354487 118017 None 302 Supplying and fixing regular MCB distribution panel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suitable type capacity ELMCB / MCb's as an incomer for 3 phase double door with necessary bus bar completely wired to use on 440volts 3 phase 4 wired powder coated painting etc.. complete with provision for fixing of single/three phase suitable capacity ELMCB/MCb's as outgoings confirming to IS8828 . 4 way (Legrand/ABB/Havells or Equivalent) Each 9169.0 9169.0 2.0 False None None False None False 18338.0 0 3354488 118017 None 303 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) 6-32Amps SP (Legrand/ABB/ Havells/or Equivalent) Each 523.0 523.0 110.0 False None None False None False 57530.0 0 3354489 118017 None 304 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. b) 6-32Amps DP (Legrand/ABB/Havells/ or Equivalent) Each 1103.0 1103.0 12.0 False None None False None False 13236.0 0 3354490 118017 None 305 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. c) 6-32Amps TPN (Legrand/ABB/Havells/ or Equivalent) Each 1777.0 1777.0 10.0 False None None False None False 17770.0 0 3354491 118017 None 306 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. d) 40Amps TPN (Legrand/ABB/Havells/ or Equivalent) Each 2393.0 2393.0 5.0 False None None False None False 11965.0 0 3354492 118017 None 307 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. e) 63Amps TPN (Legrand/ABB/Havells/ or Equivalent) Each 2399.0 2399.0 2.0 False None None False None False 4798.0 0 3354493 118017 None 308 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure a) Double Door 4 Way SP & N (Legrand/ABB/Havells or Equivalent) Each 1368.0 1368.0 2.0 False None None False None False 2736.0 0 3354494 118017 None 309 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure b) Double Door 8 Way SP & N (Legrand/ABB/Havells/or Equivalent) Each 1695.0 1695.0 4.0 False None None False None False 6780.0 0 3354495 118017 None 310 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure c) Double Door 4 Way TP & N (Legrand/ABB/Havells/or Equivalent) Each 3053.0 3053.0 4.0 False None None False None False 12212.0 0 3354496 118017 None 311 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure d) Double Door 6 Way TP & N (Legrand/ABB/Havells/or Equivalent) Each 3735.0 3735.0 2.0 False None None False None False 7470.0 0 3354497 118017 None 312 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/ panel board. a) 32-40Amps 4 pole (ABB/L&T/Havells/or Equivalent) Each 2826.0 2826.0 10.0 False None None False None False 28260.0 0 3354498 118017 None 313 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/ panel board.b) 63Amps 4 pole (ABB/L&T/Havells/or Equivalent) Each 3058.0 3058.0 2.0 False None None False None False 6116.0 0 3354499 118017 None 314 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6 Mtr 275.0 275.0 25.0 False None None False None False 6875.0 0 3354500 118017 None 315 Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coated metal box & wired completely. SP & N 20Amps (ABB/L&T/Havells/or Equivalent) Each 873.0 873.0 2.0 False None None False None False 1746.0 0 3354501 118017 None 316 Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coated metal box & wired completely. TP & N 30Amps (ABB/L&T/Havells/or Equivalent) Each 1534.0 1534.0 2.0 False None None False None False 3068.0 0 3354502 118017 None 317 L.T. U.G. CABLES AND EARTHING Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Nos 4150.0 4150.0 8.0 False None None False None False 33200.0 0 3354503 118017 None 318 Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. a) GI strip 25x3mm Mtr 75.0 75.0 100.0 False None None False None False 7500.0 0 3354504 118017 None 319 Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. b) GI strip 25x6mm Mtr 115.0 115.0 120.0 False None None False None False 13800.0 0 3354505 118017 None 320 Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. c) 600x600x3mm GI Plate Mtr 760.0 760.0 4.0 False None None False None False 3040.0 0 3354506 118017 None 321 Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. d) 600x600x3mm CU Plate Mtr 6900.0 6900.0 2.0 False None None False None False 13800.0 0 3354507 118017 None 322 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.. 8 SWG Copper wire. Mtr 105.0 105.0 100.0 False None None False None False 10500.0 0 3354508 118017 None 323 Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armoured UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. a) 2 core 10 sq.mm (Havells/polycab/KEI/ or Equivalent) Km 101113.0 101113.0 0.1 False None None False None False 10111.3 0 3354509 118017 None 324 Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. b) 4 core 10 sq.mm (Havells/polycab/KEI/ or Equivalent) Km 148612.0 148612.0 0.2 False None None False None False 29722.4 0 3354510 118017 None 325 Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. c) 4 core 16 sq.mm (Havells/polycab/KEI/ or Equivalent) Km 183442.0 183442.0 0.1 False None None False None False 18344.2 0 3354511 118017 None 326 Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. d) 3.5 core 50 sq.mm (Havells/polycab/KEI/ or Equivalent) Km 242411.0 242411.0 0.1 False None None False None False 24241.1 0 3354512 118017 None 327 Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. e) 3.5 core70 sq.mm (Havells/polycab/KEI/ or Equivalent) Km 423672.0 423672.0 0.1 False None None False None False 42367.2 0 3354513 118017 None 328 Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. a) 6 sqmm to 16 sqmm Mtr 30.0 30.0 400.0 False None None False None False 12000.0 0 3354514 118017 None 329 Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure. b) 25 sqmm to 75 sqmm Mtr 35.0 35.0 200.0 False None None False None False 7000.0 0 3354515 118017 None 330 Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only) a) 19/20 mm Each 68.0 68.0 40.0 False None None False None False 2720.0 0 3354516 118017 None 331 Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only) b) 32mm Each 117.0 117.0 6.0 False None None False None False 702.0 0 3354517 118017 None 332 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. a) 150x50mm Mtr 425.0 425.0 20.0 False None None False None False 8500.0 0 3354518 118017 None 333 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. b) 300x50mm Mtr 530.0 530.0 20.0 False None None False None False 10600.0 0 3354519 118017 None 334 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. a) 1.5 sq.mm Each 3.0 3.0 550.0 False None None False None False 1650.0 0 3354520 118017 None 335 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. b) 2.5 sq.mm Each 4.0 4.0 270.0 False None None False None False 1080.0 0 3354521 118017 None 336 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. c) 4 sq.mm Each 7.0 7.0 220.0 False None None False None False 1540.0 0 3354522 118017 None 337 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. d) 6 sq.mm Each 7.0 7.0 50.0 False None None False None False 350.0 0 3354523 118017 None 338 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. e) 10 sq.mm Each 8.0 8.0 100.0 False None None False None False 800.0 0 3354524 118017 None 339 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. f) 16 sq.mm Each 12.44 12.44 20.0 False None None False None False 248.8 0 3354525 118017 None 340 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. g) 50 sq.mm Long barrel Each 60.0 60.0 20.0 False None None False None False 1200.0 0 3354526 118017 None 341 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.h) 70 sq.mm Long barrel Each 95.0 95.0 10.0 False None None False None False 950.0 0 3354527 118017 None 342 FANS Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm) (Crompton/ORIENT ELECTRIC/BAJAJ or Equivalent) Each 2997.0 2997.0 20.0 False None None False None False 59940.0 0 3354528 118017 None 343 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value greater than or equal to 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.. 5 STAR 48" Sweep 5 Star (1200mm) (Crompton/ORIENT ELECTRIC/BAJAJ or Equivalent) Each 2949.0 2949.0 125.0 False None None False None False 368625.0 0 3354529 118017 None 344 Supplying wall mounting fan suitable to operate at single phase 230v AC supply. 400mm Sweep (Crompton/ORIENT ELECTRIC/BAJAJ or Equivalent) Each 2838.0 2838.0 5.0 False None None False None False 14190.0 0 3354530 118017 None 345 Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, required nos of round blocks and clamps. On wall / ceiling / Rafters / Girders Each 119.0 119.0 475.0 False None None False None False 56525.0 0 3354531 118017 None 346 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 162.0 162.0 125.0 False None None False None False 20250.0 0 3354532 118017 None 347 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 432.0 432.0 20.0 False None None False None False 8640.0 0 3354533 118017 None 348 LED LUMINAIRS / LIGHT FIXTURES & ACCESSORIES Supply of 15W LED bulk head fitting with guard, Acrylic glass and suitable driver. (Philips/Havells/Bajaj or Equivalent) Each 1500.0 1500.0 20.0 False None None False None False 30000.0 0 3354534 118017 None 349 Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8. Power Input : 220-240V @ 50 Hz & power factor . 0.9 along with CE approved drivers. 2 years warranty against any manufacturing defect working under standard electrical condition. a) Led light fitting 2' - 9 / 10 watts (Philips/Havells/Bajaj or Equivalent) Each 496.0 496.0 260.0 False None None False None False 128960.0 0 3354535 118017 None 350 Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8. Power Input : 220-240V @ 50 Hz & power factor . 0.9 along with CE approved drivers. 2 years warranty against any manufacturing defect working under standard electrical condition. b) Led light fitting 4' - 20 / 22 watts (Philips/Havells/Bajaj or Equivalent) Each 740.0 740.0 195.0 False None None False None False 144300.0 0 3354536 118017 None 351 Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8. Power Input : 220-240V @ 50 Hz & power factor . 0.9 along with CE approved drivers. 2 years warranty against any manufacturing defect working under standard electrical condition. c) Led light fitting 2 X 4' - 36 / 40 watts (Philips/Havells/Bajaj or Equivalent) Each 1197.0 1197.0 5.0 False None None False None False 5985.0 0 3354537 118017 None 352 Supplying of Surface / recess mounting non integrated type LED down light …W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power / COB with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 100 lumen per watt, 120degree beam spread, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit THD Less then 20%, Life as per LM 79, The operating input voltage should be between 130 to 275 volts, BIS Approved and tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 10-12W (Philips/Havells/Bajaj or Equivalent) Each 835.0 835.0 10.0 False None None False None False 8350.0 0 3354538 118017 None 353 Supply of LED Flood / Hi bay light with ......W system power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1 200-270v voltage with electronic driver, PF greater than 0.9, should meet ANSI 2G vibration test, compliance to UL/CE with class 1. System rating shall be 50K hr. @ lumen maintenance of 70%. system efficiency greater than 80ml/w. Overload & short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .........W system power consumption. LEd efficiency greater than 130ml/w at 1w and fixture efficiency greater than 75ml/w with CRI greater than 75. luminaire Manufacturer should have in-house facility accredited by NABL/CPRI & any government certified agency & design & development facility certified by ISO 9001:2008. Housing with supplier word mark/name shall be engraved / embossing on the die cast housing / body part. 2 years warranty against any manufacturing defect working under standard electrical condition as mentioned above should be given by LED manufacturer. 70-80W FLOOD LED LIGHT (Philips/Havells/Bajaj or Equivalent) Each 7390.0 7390.0 4.0 False None None False None False 29560.0 0 3354539 118017 None 354 LT PANEL WORKS Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14/16G, suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement and shall be interlocked to avoid paralleling, adequate size cable alley, painting, earthing, numbering, danger plate etc. as required as per specifications and drawings. The panels should be with all items as per SLD and Specification. Fabricating supplying and mounting MS box made out … SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint and Powder coating. etc., complete. 14SWG (ABB/L&T/Havells or Equivalent) Sq CM 0.43 0.43 45000.0 False None None False None False 19350.0 0 3354540 118017 None 355 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x6mm Rmtr 497.0 497.0 4.0 False None None False None False 1988.0 0 3354541 118017 None 356 Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M S flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips. Mtr 3078.0 3078.0 4.0 False None None False None False 12312.0 0 3354542 118017 None 357 Supplying and running of Aluminium / Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm, Aluminium Strip Mtr 115.0 115.0 4.0 False None None False None False 460.0 0 3354543 118017 None 358 Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required wit communication Port and class 0.5s accuracy. Each 8370.0 8370.0 1.0 False None None False None False 8370.0 0 3354544 118017 None 359 Supplying, fixing and wiring 50/5A to 630/5A 5VA burden class - 1 current transformer. Each 505.0 505.0 2.0 False None None False None False 1010.0 0 3354545 118017 None 360 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC. Each 464.0 464.0 9.0 False None None False None False 4176.0 0 3354546 118017 None 361 Supplying, fixing and wiring 3 Digit Digital Ammeter/Voltmeter Each 1280.0 1280.0 1.0 False None None False None False 1280.0 0 3354547 118017 None 362 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail / flush mounting panel board. Each 8316.0 8316.0 1.0 False None None False None False 8316.0 0 3354548 118017 None 363 Supply and fixing of fully enclosed Automatic Transfer Switch (ATS) Pre-wired with flexible settings and seamless transfer between twom power sources. The enclosure made of MS Power coated of necessary size. The switch comprising of EB/DG-Priority Source Selection, Adjustable Time Delay (0.1 sec to 3 hours). Double Break Contact System offering High Short-time Withstand (lcw) with necessary Terminal Shrouds, Phase Barriers & Source Separator, Protections for UV/OV phase sequence, single phasing, Frequency variation. There should be sufficient space for cable termination. Three Phase 415 volts. 125Amps Each 74520.0 74520.0 1.0 False None None False None False 74520.0 0 3354549 118017 None 364 Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal magnetic/micro processor releases and earth fault as per IS-13947. (Icu=Ics) FOUR POLE 125Amps 25kA (ABB/L&T/Havells/or Equivalent) Each 10072.0 10072.0 1.0 False None None False None False 10072.0 0 3354550 118017 None 365 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 5-32 Amps SP (ABB/L&T/Havells/or Equivalent) Each 523.0 523.0 4.0 False None None False None False 2092.0 0 3354551 118017 None 366 Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal magnetic/micro processor releases and earth fault as per IS-13947. (Icu=Ics) THREE POLE 63Amps 25kA (ABB/L&T/Havells/or Equivalent) Each 5641.0 5641.0 3.0 False None None False None False 16923.0 0 3354552 118017 None 367 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 5-32 Amps TPN (ABB/L&T/Havells/or Equivalent) Each 1777.0 1777.0 8.0 False None None False None False 14216.0 0 3354553 118017 None 368 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 40 Amps TPN (ABB/L&T/Havells/or Equivalent) Each 2393.0 2393.0 4.0 False None None False None False 9572.0 0 3354554 118017 None 369 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 63 Amps TPN (ABB/L&T/Havells/or Equivalent) Each 2399.0 2399.0 4.0 False None None False None False 9596.0 0 3354555 118017 None 370 Supplying and fixing of ON, OFF Push buttons, with all necessary accessories. (ABB/L&T/Havells/or Equivalent) Each 550.0 550.0 4.0 False None None False None False 2200.0 0 3354556 118017 None 371 Supply and fixing of 4 pole contactor with No/NC contacts on existing wood/ panel board using necessary bolts, nitsm washers and wiring etc, complete with AC-3 rating and as per IS- 13947 25Amps (ABB/L&T/Havells/or Equivalent) Each 1187.0 1187.0 3.0 False None None False None False 3561.0 0 3354557 118017 None 372 Supplying, fixing and wiring heavy duty low voltage capacitors confirming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery.(ABB/L&T/Havells/or Equivalent) Kvar 432.0 432.0 25.0 False None None False None False 10800.0 0 3354558 118017 None 373 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controilled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, comprehensive displays with large, three place LED display, long term memory for settings, protection for over voltage, power facor correction fault and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs. (ABB/L&T/Havells/or Equivalent) Each 19440.0 19440.0 1.0 False None None False None False 19440.0 0 3354559 118017 None 374 UPS, BATTERIES. Supplying, erecting, testing and commissioning of OFF-LINE UPS System suitable for operation on 230V Input and 230V, Output, 50Hz, A/C supply with all accessories complete and excluding batteries and wiring complete. 5 KVA OFFLINE UPS (Techser/power one/APC/ or Equivalent) Each 38661.0 38661.0 1.0 False None None False None False 38661.0 0 3354560 118017 None 375 Supplying, erecting, testing & commissioning of ONLINE UPS System suitable for operation on 230V, 50Hz, A/C supply with isolation transformer all accessories complete and Excluding batteries and wiring complete 3 KVA ONLINE UPS (Techser/power one/APC/ or Equivalent) Each 47973.0 47973.0 1.0 False None None False None False 47973.0 0 3354561 118017 None 376 Supplying, installation, testing & commissioning of 12volts DC AH Batteries in poly propylene container for UPS Low maintenance Tubular/smf batteries. 12V, 75-80 AH Capacity. Acid battery. (For 30min. Backup for each ups) (Exide EL series/Amron/luminous/ or Equivalent) Each 10748.0 10748.0 6.0 False None None False None False 64488.0 0 3354562 118017 None 377 CAMERAS & ACCESSORIES Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, 4.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WDR (Wide Dynamic Range), 3D DNR (Digital Noise Reduction), PoE (Power over Ethernet/1 RJ45 10M/100M self-adaptive Ethernet port), IP67, Motion detection, Alarms (Video tampering, network disconnected, IP address conflicted), Protocols (TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv6, Bonjour), Standard (ONVIF(PROFILE S,PROFILE G),PSIA,CGI,ISAPI), General Function (Anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark), with base box, other necessary accessories. The cost shall includes end terminations. (Hikvision/Dahua/samsung/ or Equivalent) Nos 6500.0 6500.0 14.0 False None None False None False 91000.0 0 3354563 118017 None 378 Supply, Installation, Testing & Commissioning of16port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories. (Hikvision/D link/CP Plus/TP link/ or Equivalent) Nos 18500.0 18500.0 1.0 False None None False None False 18500.0 0 3354564 118017 None 379 Supply, Installation, Testing & Commissioning of NVR (Networkable Video Recorder) - 16Channel NVR, Up to 16ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up to 1920x1080P resolution, HDD quota and group management 4 SATA, 3 USB, interface, 1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface, 4TB HDD/30Days recording storage, whichever is higher, support 10TB external HDD connected through SATA Ports DVR should have 2 external SATA Port, Alarm in (16) Alarm out (16), 100 240VAC, 6.3A, 50 60Hz, rack mountable, Password protection, Upto 16 simultaneous views from different DVRS on same LAN on single screen, etc. with all necessary Accessories. (Hikvision/D link/CP Plus/TP link/ or Equivalent) Nos 40000.0 40000.0 1.0 False None None False None False 40000.0 0 3354565 118017 None 380 Supply, Installation, Testing & Commissioning of HDMI, Display Monitor 32" high resolution, Monitor with all mounting bracket accessories. (Acer/Lenovo/samsung/or equivalent) Nos 25000.0 25000.0 1.0 False None None False None False 25000.0 0 3354566 118017 None 381 Supplying and drawing UTP-CAT 6 LAN cable. (Dlink/CP PLUS/Havells/or equivalent) Rmtr 34.0 34.0 590.0 False None None False None False 20060.0 0 3354567 118017 None 382 NETWORKING AND COMMUNICATION : Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. a) TV/ Telephone socket (Dlink/legrand/Havells/or equivalent) Each 147.0 147.0 15.0 False None None False None False 2205.0 0 3354568 118017 None 383 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. b) RJ45/I.O. outlet Cat -6 (Dlink/legrand/Havells/or equivalent) Each 211.0 211.0 115.0 False None None False None False 24265.0 0 3354569 118017 None 384 Supplying and drawing UTP-CAT 6 LAN cable.(Dlink/CP PLUS/Havells/or equivalent) Rmtr 34.0 34.0 2800.0 False None None False None False 95200.0 0 3354570 118017 None 385 Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. a) 2 Pair (Dlink/CP PLUS/Havells/or equivalent) Rmtr 19.0 19.0 400.0 False None None False None False 7600.0 0 3354571 118017 None 386 Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. b) 5 Pair (Dlink/CP PLUS/Havells/or equivalent) Rmtr 58.0 58.0 100.0 False None None False None False 5800.0 0 3354572 118017 None 387 Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. c) 20 Pair (Dlink/CP PLUS/Havells/or equivalent) Rmtr 181.0 181.0 20.0 False None None False None False 3620.0 0 3354573 118017 None 388 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable. RG-6. (Dlink/CP PLUS/Havells/or equivalent) Rmtr 42.0 42.0 200.0 False None None False None False 8400.0 0 3354574 118017 None 389 Supplying and fixing of switch mounting rack with power manager & cable manager. 6U with 450mm depth (Dlink/CP PLUS/Havells/or equivalent) Each 4657.0 4657.0 4.0 False None None False None False 18628.0 0 3354575 118017 None 390 Supplying and fixing of power strip. Each 1233.0 1233.0 4.0 False None None False None False 4932.0 0 3354576 118017 None 391 Supplying and fixing of fan. Each 931.0 931.0 4.0 False None None False None False 3724.0 0 3354577 118017 None 392 Supplying fixing of Network Switches. 24 Port Gigabyte (mageable) (Dlink/CP PLUS/Havells/or equivalent) Each 46053.0 46053.0 5.0 False None None False None False 230265.0 0 3354578 118017 None 393 Supplying & fixing of ….mtrs Cat6 Patch Cable - a) 1 mtr (Dlink/CP PLUS/Havells/or equivalent) Each 190.0 190.0 115.0 False None None False None False 21850.0 0 3354579 118017 None 394 Supplying & fixing of ….mtrs Cat6 Patch Cable - b) 2 mtr (Dlink/CP PLUS/Havells/or equivalent) Each 286.0 286.0 115.0 False None None False None False 32890.0 0 3354580 118017 None 395 Supplying & fixing of Patch Panel for LAN cabling. 24 Port 10/100/1000 Patch Panel (Dlink/CP PLUS/Havells/or equivalent) Each 8260.0 8260.0 5.0 False None None False None False 41300.0 0 3354581 118017 None 396 Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination. 20 pair (Dlink/CP PLUS/Havells/or equivalent) Each 362.0 362.0 2.0 False None None False None False 724.0 0 3354582 118017 None 397 Supply and laying 6 Core Multimode OM3 outdoor Fiber Cable.(Dlink/CP PLUS/Havells/or equivalent) Mtr 250.0 250.0 100.0 False None None False None False 25000.0 0 3354583 118017 None 398 Supply and providing 12F, 1U, LC MM OM3, Loaded with Pigtails, Splice tray, adapter & splice protectors (Dlink/CP PLUS/Havells/or equivalent) Each 12500.0 12500.0 2.0 False None None False None False 25000.0 0 3354584 118017 None 399 DG SET WORKS Supplying, erection, testing and commissioning of .....KVA Diesel Generating Set on existing CC platform Comprising of Diesel Engine Developing ..... BHP @ 1500 RPM confirming to BS 5514.The engine should be turbocharged, Air/water cooled with 10 % over load for 1hour in every 12 hours of operation coupled to suitable capacity alternator rated at 415V, 0.8 PF(lag) 50 Hz, 3 phase, 4 wire system, confirming to BS 5000/IS 4722. The alternator shall be of brushless type ,Screen protected, revolving field, Mounted on suitable Channel Iron Base Frame, Complete with suitable capacity Fuel Tank, required nos. of Batteries of 12/24V as per requirement, Acoustic enclosure as per CPCB Approved Norms.62.5KVA (cummins/Mahindra/kirloskar/or equivalent) Each 618585.0 618585.0 1.0 False None None False None False 618585.0 0 3354585 118017 None 400 Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminum Bus Bar with the accommodation for .....amps 4 pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube OIL pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over /under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. Each 75900.0 75900.0 1.0 False None None False None False 75900.0 0 3354586 118017 None 401 PART-A PROVIDING 2 POLE STRICTURE AT TAPPING POINT RCC D.P structure using 9 mtrs RCC Pole with WL 145 kg Set 21369.0 21369.0 1.0 False None None False None False 21369.0 0 3354587 118017 None 402 11 kV, 45 KN Polymeric Insulator Nos 202.0 202.0 6.0 False None None False None False 1212.0 0 3354588 118017 None 403 Guy Set complete with NO 15 strain insulator and concreting materials Set 1209.0 1209.0 2.0 False None None False None False 2418.0 0 3354589 118017 None 404 Caution danger board No. 146.0 146.0 1.0 False None None False None False 146.0 0 3354590 118017 None 405 Anti - Climbing Device (12mtrs / 1 kg G.I. Barbed Wire) Each 93.0 93.0 2.0 False None None False None False 186.0 0 3354591 118017 None 406 11 kV 400 A Double Break GOS Set 20528.0 20528.0 1.0 False None None False None False 20528.0 0 3354592 118017 None 407 H Frame for mounting GOS No. 4134.0 4134.0 1.0 False None None False None False 4134.0 0 3354593 118017 None 408 Spiral earth electrode Nos 248.0 248.0 2.0 False None None False None False 496.0 0 3354594 118017 None 409 DOLO Cut Out Set 5672.0 5672.0 1.0 False None None False None False 5672.0 0 3354595 118017 None 410 LABOUR CHARGES Errection of 9Mtrs Long RCC DP Structure Per Structure 4114.0 4114.0 1.0 False None None False None False 4114.0 0 3354596 118017 None 411 Fixing of Guy set with Break insulators, turn buckle and anchor rod Set 896.0 896.0 2.0 False None None False None False 1792.0 0 3354597 118017 None 412 Caution danger board No. 61.0 61.0 1.0 False None None False None False 61.0 0 3354598 118017 None 413 Fixing Anti - Climbing Device. Each 64.0 64.0 2.0 False None None False None False 128.0 0 3354599 118017 None 414 Errection of 400A D/B GOS Set 894.0 894.0 1.0 False None None False None False 894.0 0 3354600 118017 None 415 Errection of H Frame for mounting GOS Nos 242.0 242.0 1.0 False None None False None False 242.0 0 3354601 118017 None 416 Fixing of Spiral earth electrode Nos 140.0 140.0 2.0 False None None False None False 280.0 0 3354602 118017 None 417 Fixing of earth electrode Nos 631.0 631.0 1.0 False None None False None False 631.0 0 3354603 118017 None 418 Fixing of DOLO Cutouts Each 178.0 178.0 1.0 False None None False None False 178.0 0 3354604 118017 None 419 Providing concrete cement to poles with materials and labour cost including curing etc. a) Base concreting 1:4:8, 500x650x150mm. Supply & installation: Nos 273.0 273.0 2.0 False None None False None False 546.0 0 3354605 118017 None 420 Providing concrete cement to poles with materials and labour cost including curing etc. b) Pole conctreting 1:2:4, 650x500x1700mm Supply & installation: Nos 3158.0 3158.0 2.0 False None None False None False 6316.0 0 3354606 118017 None 421 Providing concrete cement to poles with materials and labour cost including curing etc. c) Providing coping for poles with 1:2:4 and as per actuals, 150mm around pole for an height of 300mm Supply & installation: Nos 542.0 542.0 2.0 False None None False None False 1084.0 0 3354607 118017 None 422 Supplying & Fixing Chemical earthing for grounding, conduits, IC cut outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm. Using 6 ft copper bonded rod with backfill compound 1 Kit 5857.0 5857.0 6.0 False None None False None False 35142.0 0 3354608 118017 None 423 Digging of Pit for providing GI/ Chemicle Pipe type Earthing Per Pit 578.0 578.0 6.0 False None None False None False 3468.0 0 3354609 118017 None 424 LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/GPRS Modem (as per technical specification) upto 100 kVA Distribution Transformer. No. 17529.0 17529.0 1.0 False None None False None False 17529.0 0 3354610 118017 None 425 Supply, testing and commissioning of Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 technical spcification & BESCOM approved. B. CABLE ENTRY TYPE, 100 kVA, Aluminium Wdg, Star 1 (4 Star) (HESCOM Approved makes) Each 207820.0 207820.0 1.0 False None None False None False 207820.0 0 3354611 118017 None 426 Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing Per Structure 4249.0 4249.0 1.0 False None None False None False 4249.0 0 3354612 118017 None 427 Construction of platform with size stone, cement concrete for errection of Transformer / HT panels /Heavy Equipment. Construction of platform (1.5x1.5x1.2) mtr in size stone, for errection of transformers/Heavy Equipment including all materials, labour, excavation of (1.5x1.5x1) mt pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 1cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1:6 cutting complete providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely. (For Trasnformer) Per Structure 26401.0 26401.0 1.0 False None None False None False 26401.0 0 3354613 118017 None 428 PART-E 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx95Sqmm Set 9992.0 9992.0 6.0 False None None False None False 59952.0 0 3354614 118017 None 429 PART-E 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx95 Sqmm Set 3651.0 3651.0 2.0 False None None False None False 7302.0 0 3354615 118017 None 430 HT Cable 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 3Cx95 Sqmm Mtr 782.6 782.6 200.0 False None None False None False 156520.0 0 3354616 118017 None 431 CIVIL WORKS RELATED TO ELECTRICAL WORKS Digging of trench of 0.6m to 1.0m deep x 0.50 to 1 mtr wide refilling the trench to the required ground level and consolidating etc…complete. (As per civil SR KSRB I-2, P-7) In Hard soil Cum 102.0 102.0 200.0 False None None False None False 20400.0 0 3354617 118017 None 432 Providing and filling sand in excavated trench to covering with brick protection, already laid UG cable to a depth of 150mm all-round the cable. Cum 215.0 215.0 200.0 False None None False None False 43000.0 0 3354618 118017 None 433 Providing, laying and fixing following dia RCC Hume Pipe, 2000 mm Long, 150 mm Dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required with collars. Each 351.0 351.0 10.0 False None None False None False 3510.0 0 3354619 118017 None 434 Supplying and fixing Route & Joint indicating slab with MS Anchor rod Each 130.0 130.0 50.0 False None None False None False 6500.0 0 3354620 118017 None 435 Chain link fencing - Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. Providing and laying in position plain cement concrete of mix 1:3:6 for poles. The rate shall included all rectangular poles, height 2.8 mtrs fixed at a distance of 2 mtrs welded together, etc. with chain link matching gate of 1.5 mtrs wide with hinged & locking arrangements. Sqm 987.0 987.0 90.0 False None None False None False 88830.0 0 3354621 118017 None 436 Spreading of Jelly - Supplying and spreading 20-40mm nominal size stone/jelly with all lead and lifts. Cum 1038.0 1038.0 9.0 False None None False None False 9342.0 0 3354622 118017 None 437 Supplying of two buckets standalong with buckets Each 630.0 630.0 2.0 False None None False None False 1260.0 0 3354623 118017 None 438 Supplying of HAND GLOVES Each 170.0 170.0 2.0 False None None False None False 340.0 0 3354624 118017 None 439 Supplying of first aid box Each 215.0 215.0 2.0 False None None False None False 430.0 0 3354625 118017 None 440 Supplying of SAFETY MASK Each 64.0 64.0 2.0 False None None False None False 128.0 0 3354626 118017 None 441 Supplying of FIRST AID CHART with lamination Each 225.0 225.0 2.0 False None None False None False 450.0 0 3354627 118017 None 442 Supplying and installation of RUBBER MAT 1mtx2mt-10mm Thick Each 1105.0 1105.0 5.0 False None None False None False 5525.0 0 3354628 118017 None 443 supply, erection, testing & commissioning of wall mounted 4/5.0 Kg, CO2, Fire Extinguishers etc., complete with all necessary accessories to fix the Extinguisher. Each 9723.0 9723.0 2.0 False None None False None False 19446.0 0 3354629 118017 None 444 Caution danger board No. 61.0 61.0 1.0 False None None False None False 61.0 0 3354630 118017 None 445 INSPECTION CHAMBER - Supply, laying and Constructing water tight brick masonry Inspection Chamber with first class bricks in cement mortar 1:6 (1 cement :6 coarse sand), R.C.C. top slab of 150 mm thick with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) with CI chamber cover for following size of trenches with frame. Foundation concrete 150 mm thick 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, M.S. foot rests including fixing in 20 x 20 x 10 cm cement conc. blocks neatly finished, complete as per standard design and approved drawings. (Price shall include the cost of excavation, back filling, disposal of surplus earth dewatering and water proofing of manholes as directed at site & other associated civil works). - 600MMx600MMX750MM Each 5500.0 5500.0 4.0 False None None False None False 22000.0 0 3354631 118017 None 446 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required. Each 350.0 350.0 20.0 False None None False None False 7000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719378299000 1 None None ELIGIBILITY Tenders from joint ventures are not acceptable. None 1719378299000 1 None None ELIGIBILITY In the case of the death of a contractor after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and willing, can execute and complete the work at the accepted tender rates irrespective of the cost of the work. None 1719378299000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka. None 1719378299000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719378299000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719395423000 0 None None ELIGIBILITY The bidder shall ensure credit of tender processing fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission None 1719395439000 0 None None ELIGIBILITY In the event of total amount quoted is below the estimated cost, the tenderer has to deposit the difference amount in the form of F.D.R, at the time of agreement as additional S.D for the un-balanced amount. None 1719395453000 0 None None ELIGIBILITY The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches. None 1719395462000 0 None None ELIGIBILITY EMD payments through e-payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719395475000 0 None None ELIGIBILITY The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents of applicable works manual and further orders there on. None 1719395491000 0 None None ELIGIBILITY GST and other taxes will be deducted as per prevailing Government orders. None 1719395509000 0 None None ELIGIBILITY The responsibility of safe custody of mechanical / electrical equipments / materials, etc., shall be with the contractor until they are finally handed over to be department. None 1719395521000 0 None None ELIGIBILITY The cable trench and laying shall be executed as per ISS No.1255-1967 duly taking all necessary precaution. None 1719395533000 0 None None ELIGIBILITY All necessary drawings, paper works, etc., and any other formalities required to be observed shall be the responsibility of contractor. None 1719395543000 0 None None ELIGIBILITY Whenever executing, authority insist proof of having purchased the materials (used during executing the work) for verification the contractor shall produce the purchase bills. None 1719395555000 0 None None ELIGIBILITY It is the responsibility of contractor to observe all necessary formalities of electricity companies for charging the lines and taking over the infrastructure like breaker lines TCs by electricity companies satisfactorily duly acknowledging the inventory of materials used in the work. None 1719395565000 0 None None ELIGIBILITY The contractor is responsible for safety and security of all materials. None 1719395572000 0 None None ELIGIBILITY GST will be paid separately None 1719395585000 0 None None ELIGIBILITY The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects, for a period of one year from the date of satisfactory completion and commissioning. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the cost and risk of the contractor None 1719395595000 0 None None ELIGIBILITY The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval of the competent authority. None 1719395607000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-4 of KPWD / if any amendments are issued by the GoK. None 1719395618000 0 None None ELIGIBILITY It is the responsibility of the contractor to pursue and obtain all necessary approvals. None 1719395629000 0 None None ELIGIBILITY After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications by the University, then such materials will be rejected. The contractor shall replace the rejected materials at his own cost. None 1719395639000 0 None None ELIGIBILITY The tenderer shall pass on to the department all the warranties, benefits etc., from the original equipment manufactures. None 1719395649000 0 None None ELIGIBILITY The Contractor shall be solely responsible, not withstanding any stipulation by Owner or Engineer, for initiating, maintaining and supervising all safety precautions and programs, in connection with the work, and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician. None 1719395662000 0 None None ELIGIBILITY The Contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the Contractor under this works contract will be paid to the contractor separately over and above the contractors bid amount. The increase if any in the GST shall not be paid in the extended period of contract for which the contactor alone is responsible for delay as determined by the Authority None 1719395676000 0 None None ELIGIBILITY The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works. None 1719395690000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. As per Karnataka state government order LD/300/LET/2006 bangalore dated: 01.01.2007 and government letter No. PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. None 1719395700000 0 None None ELIGIBILITY Conditional Tenders will not be accepted. None 1719395711000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1719395724000 0 None None ELIGIBILITY The bidders should submit the Bid capacity of his firm. The details of 1.5(A) & 1.5(B) as applicable should be submitted in the prescribed format & should be signed by the concerned by the competent authority. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection. None 1719395738000 0 None None ELIGIBILITY All the documents to be furnished are to be attested by the Gazetted officer or by Notary before uploading in the e- Procurement portal. None 1719395748000 0 None None ELIGIBILITY Third party inspection will be carried out as per KTPP Act. None 1719395763000 0 None None ELIGIBILITY Contractor shall pay minimum wages to labour working under him as per prevailing labour act and amended time to time. None 1719395774000 0 None None ELIGIBILITY All the tenderers shall get updated with corrigendum / addendum issued from time to time during the entire tender process. None 1719395787000 0 None None ELIGIBILITY Contractors are advised to contact the department about the documentation and for other information before uploading the tender. Insufficient documentation will result in rejection of tender. None 1719395808000 0 None None ELIGIBILITY Contractors should not sub contract the works awarded for them. None 1719395824000 0 None None ELIGIBILITY Tenders with sublet / sub contract work done certificates are not acceptable. None 1719395840000 0 None None ELIGIBILITY License from the labour department shall be produce before agreement and payment towards PF, EPF and other taxes shall be made by the agency only. None 1719395852000 0 None None ELIGIBILITY Periodical inspection of works shall be done by third party quality inspecting team. None 1719395861000 0 None None ELIGIBILITY Any other GST / taxes deductions will be deducted as per prevailing government orders. None 1719396038000 0 None None ELIGIBILITY The agency shall carry out the work in phases (wing wise) as per the priority of the users department with in stipulated time limit. None 1719396079000 0 None None ELIGIBILITY Contractor shall get the prior approval of the engineer in-charge before using following materials None 1719396125000 0 None None ELIGIBILITY Flooring items like ceramic tiles / vitrified tiles / granite slabs / cobble stones. Wood works, hardware fixtures, sanitary / water supply and electrical fixtures. None 1719396191000 0 None None ELIGIBILITY All hardware shall be of powder coated aluminum of heavy section or as per tender specifications. None 1719396210000 0 None None ELIGIBILITY The successful tenderer has to deposit 5% of contract price as security deposit before execution of agreement in the form FDR drawn from any scheduled / Nationalized bank drawn in favour of Comptroller, UHS Bagalkot. None 1719396274000 0 None None ELIGIBILITY The agency shall use only ACC / Ultratech / Birla Super / JK / Coramandal or equivalent cements of 43 / 53 grade OPC. None 1719396295000 0 None None ELIGIBILITY The agency shall use only primary approved TMT steel shall be used steel make like Tata / Jsw / Vizag / Sail or equivalent. None 1719396312000 0 None None ELIGIBILITY Monthly progress report as per bar chart shall be submitted. None 1719396327000 0 None None ELIGIBILITY The agency should establish the laboratory at site of work for periodical testing of materials. None 1719396338000 0 None None ELIGIBILITY Materials like steel, cement, bitumen etc., required for the work shall be procured by the contractors themselves & should be got tested by the quality control authority, before use on the work. None 1719396350000 0 None None ELIGIBILITY Department will not supply any material. None 1719396362000 0 None None ELIGIBILITY As per G.O. No. LD 300/LET/2006 Dt: 18/01/2007 1% will be deducted from each and every bill as per labour welfare tax act. None 1719396375000 0 None None ELIGIBILITY All the works are to be carried out as per the standard specifications issued from time to time by BIS & as per the relevant IS codes. None 1719396392000 0 None None ELIGIBILITY In the case of the death of a contractor after executing the agreement/ commencement of the work, his legal heir, if an eligible registered contractor and willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work. None 1719396405000 0 None None ELIGIBILITY The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. None 1719396491000 0 None None ELIGIBILITY Existing commitments work details (B-value) should be furnished duly a attested by the concerned Executive Engineer as per Standard Tender Documents. None 1719396524000 0 None None ELIGIBILITY The increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1719396541000 0 None None ELIGIBILITY All duties, taxes, and other levies payable by the contractor under the contract, or for any other cause, shall be included in the rates, prices and total Tender Price submitted by the Tenderer. None 1719396552000 0 None None ELIGIBILITY The Tenderer shall fill in rates and prices and line item total (both in figures and words) for all items of the Works described in the Bill of Quantities along with total tender price (both in figures and words). Items for which no rate or price is entered by the Tenderer will not be paid for by the Employer when executed and shall be deemed covered by the other rates and prices in the Bill of Quantities. Corrections, if any, shall be made by crossing out, initialing, dating and rewriting. None 1719396564000 0 None None ELIGIBILITY Tenders shall remain valid for a period not less than ninety days after the deadline date for tender submission specified in Clause 16. A tender valid for a shorter period shall be rejected by the Employer as non-responsive. None 1719396648000 0 None None ELIGIBILITY In exceptional circumstances, prior to expiry of the original time limit, the Employer may request that the Tenderers may extend the period of validity for a specified additional period. The request and the Tenderers responses shall be made in writing or by cable. A Tenderer may refuse the request without forfeiting his earnest money deposit. A Tenderer agreeing to the request will not be required or permitted to modify his tender, but will be required to extend the validity of his earnest money deposit for a period of the extension, and in compliance with Clause 13 in all respects. None 1719396757000 0 None None ELIGIBILITY Instruments having fixed validity issued as earnest money deposit for the tender shall be valid for 45 days beyond the validity of the tender. None 1719396779000 0 None None ELIGIBILITY Any deposits/fees required to be paid to KEB and / or local inspectorate in connection with the electrical works, would be reimbursed to the contractor on furnishing of relevant receipts towards the above. None 1719396820000 0 None None ELIGIBILITY On completion of the work, the contractor shall obtain and deliver to the employer a certificate of final inspection and approval as given by the local ESCOMs & local Electrical Inspectorate office. None 1719396847000 0 None None ELIGIBILITY The contractor shall also be responsible for submission and follow up of applications for power sanction. None 1719396940000 0 None None ELIGIBILITY The contractors scope drawings/schemes as required by the local inspectorate and getting the same approved by the electrical inspectorate. None 1719396955000 0 None None ELIGIBILITY On completion of work, the contractor shall obtain approval from the electrical inspector for the installation itself. None 1719396979000 0 None None ELIGIBILITY The defect liability period shall be 3 Years from the date of completion of work. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for Award of this contract, (i) Each Tenderer in its name should have in the last five years i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24. (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 13,55,49,900.00 (b) Satisfactory completed (at least 50% of contract value) as prime contractor at least one similar nature work of (single building work only with water supply / sanitary and electrification works) in State Government /Central Government / Public Sector Undertaking / Municipal Corporations of State Government /Central Government shall be with RCC framed structure including Excavation, PCC works, RCC footings, RCC roof, RCC columns and Beam works, value not less than Rs. 3,38,87,475.00. This has to be supported by the certificate issued by the officer not below the rank of an Executive Engineer. (c) Executed in any one year during 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 following minimum quantities of works. Sl. No Description Unit Qty Required (1) Earthwork Excavation Cum 3053.26 (2) Cement concrete RCC / PCC Cum 1434.98 (3) Solid block masonry / Bricks masonry Sqm / Cum 2662.28 (4) UCR masonry /SSM Cum 158.40 (5) Steel reinforcement Kg 120506.50 (6) Flooring with Granite / vitrified / glazed tile / ceramic / kota (qty inclusive of all) Sqm 2665.60 (7) Plastering Sqm10453.61 (8) Providing and applying painting Sqm 9707.92 (9) Door Shutters Sqm 204.00 (10) Aluminum/UPVC/Steel/WPC/Wooden Windows and ventilators Sqm 262.14 Past Experience None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None The tenderer or his identified sub-contractor should possess required valid PWD / Electrical Inspectorate electrical license for executing building electrification works and should have executed similar electrical works totaling amount (not less than 50% of the electrical works) in any one year for the last five years. 50% Amount Rs. 30,68,067.00 Past Experience None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None Enclose the list of work performed as prime contractor (In the same name) on works of similar nature during the last 5 years i.e. for 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 as per sub clause table 1.3 of section 3 of standard bid document (as per relevant table). Project Name, Name of Employer, Description of work, Contract number, Value of contract Rs. Lakhs, Date of issue of work order, Specified period of completion, Actual date of completion, Remarks explaining reasons for delay in completion of work Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer / agency in its name should have in the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 achieved in at least two financial years, turnover equal to Rs. 13,55,49,900.00 for each individual work (In all classes of civil engineering construction works). In support of this claim, he has to provide year wise turnover certificate of duly certified by the Chartered Accountant with chartered accountant UDIN number as per sub clause 3.2. (a) of section 2 of standard bid document. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The agency shall submit Statement indicating I.Existing commitments and ongoing works The above statements should be furnished as per clauses 1.5 (A) of Section 3 of Qualification information of Standard Bid document (as per the table). These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer. A) Existing Commitments and on-going works Description of work, Place and state, Contract No. Date, Name and address of employer, Value of contract (Rs. Lakhs) Stipulated period of completion, Value of works remaining to be completed (Rs. Lakhs), Anticipated date of completion Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose Existing Commitments and on-going works None None None None The agency shall submit Statement indicating II. Works for which tenders are already submitted The above statements should be furnished as per clauses 1.5(B) of Section 3 of Qualification information of Standard Bid document (as per the table). These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer. A) Works for which tenders already submitted: Description of work, Place & State, Name and address of employer, Estimated value of works (Rs. Lakhs), Stipulated period of completion, Date when decision is expected, Remarks if any Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose Works for which tenders already submitted None None None None The quantities of work executed as prime contractor (in the same name) during the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 as per sub clause 1.4 of section 3 of standard bid document, as per relevant table. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Current certificate of the Registration in KPWD/CPWD Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose certificate of the registration in KPWD/CPWD None None None None Each tenderer should further demonstrate liquid assets and / or availability of Credit facilities of Rs. 1,84,84,077.00 amount put to tender (Credit lines / letter of credit / certificates from banks) for meeting the fund requirement etc, shall be enclosed as per the format under KW manual section 1.10 of section-3 of standard bid document. The format / information shall be as per certificate mentioned in the standard bid document. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose demonstrate liquid assets and / or availability of Credit facilities None None None None The tenderer has to furnish the details of Technical Personnel working/Associated with him Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose details of Technical Personnel working/Associated None None None None The tenderer shall furnish the signed information on litigations (if any) in which the tenderer is involved. Other party (ies), Employer, Details of dispute, Amount involved, Remarks showing present status Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose signed information on litigations (if any) in which the tenderer is involved None None None None Each Tenderer should further demonstrate: Availability by owning/hiring of the required/specified key and critical equipments for this work as per the table appended here with by giving information about brief specification of the equipment as per 1.6 of clause 3.3 (a) in respect of this agreement copy should be enclosed for hiring. Sl. No., Description of the Equipment, Total No.s, Owned, Total No.s, Hired, (1) Tipper / Lorry, 2,2, (2) Transit Mixture,1,0, (3) Concrete Mixture,1, 1, (4) Pin Vibrator, 1, 1,(5) Water tanker,1,1, (6) MS plate centering material (with supports), 1200 Sqm, 1200 Sqm Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose Availability by owning/hiring of the required/specified key and critical equipments None None None None Bid capacity the bidder shall necessarily enclose duly filled and completed tender capacity in enclosed format. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose Bid capacity None None None None GST Registration Certificate. Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The agency shall submit the total value of Civil Engineering Construction works executed and payments received in the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 as per sub clause 1.2 of section 3 of standard bid document (as per relevant table). Enclose the certificate from chartered accountant with chartered accountant UDIN number. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None PAN Card (Enclose PAN Card) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose PAN Card None None None None Income tax returns of preceding last three years i.e., 2021-22, 2022-23 and 2023-24 Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. Others Methodology createdTs version createdDate modifiedDate documentName None None None None Others -- Enclose proposed methodology
tenderCriterionDocumentList	documentName optional documentTypeText To qualify for Award of this contract, Each Tenderer in its name should have in the last 5 years 2019-20 to 2023-24. a. Achieved in at least 2 financial years a minimum financial turnover in all classes of civil eng. construction works only of Rs. 13,55,49,900.00 True Technical Bid Satisfactory completed at least 50 percent of contract value as prime contractor at least 1 similar nature work of single building work with water supply/sanitary & electrification works, in State Govt/Central Govt/Public Sector Undertaking/Municipal Corporations of State Govt/Central Govt shall be with RCC framed structure value not less than Rs. 3,38,87,475. This has to be supported by the certificate issued by the officer not below the rank of an Exe.Eng. True Technical Bid Executed in any 1 year during 2019-20 to 2023-24 following minimum qty. of works, Earthwork Excavation 3053.26 Cum, Cement concrete RCC/PCC 1434.98 Cum, Solid block masonry/bricks masonry 2662.28 Sqm/Cum, UCR masonry/SSM 158.40 Cum, Steel reinforcement 120506.50 Kg, Flooring with Granite /vitrified/glazed tile/ceramic/ kota qty inclusive of all 2665.60 Sqm, Plastering 10453.61 Sqm, Painting 9707.92 Sqm, Door Shutters 204.00 Sqm, Aluminum/UPVC/Steel/WPC/Wooden Windows & ventilators, 262.14 Sqm True Technical Bid The tenderer or his identified sub-contractor should possess required valid PWD / Electrical Inspectorate electrical license for executing building electrification works and should have executed similar electrical works totaling amount not less than 50 per cent of the electrical works in any one year for the last five years. i.e. 50 per cent Amount is Rs. 30,68,067.00 True Technical Bid Enclose the list of work performed as prime contractor In the same name on works of similar nature during the last 5 years i.e. for 2019-20 to 2023-24 as per sub clause table 1.3 of section 3 of standard bid document as per relevant table. Project Name, Name of Employer, Description of work, Contract number, Value of contract Rs. Lakhs, Date of issue of work order, Specified period of completion, Actual date of completion, Remarks explaining reasons for delay in completion of work True Technical Bid To qualify for award of this contract, each Tenderer/agency in its name should have in the last five years i.e. 2019-20 to 2023-24 achieved in at least 2 financial years, turnover equal to Rs. 13,55,49,900.00 for each individual work In all classes of civil engineering construction works. In support of this claim, he has to provide year wise turnover certificate of duly certified by the CA with UDIN number as per sub clause 3.2. a of section 2 of standard bid document. True Technical Bid The agency shall submit Statement indicating I. Existing commitments and ongoing works The above statements should be furnished as per clauses 1.5 A of Section 3 of Qualification information of Standard Bid document as per the table. These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer True Technical Bid The agency shall submit Statement indicating II. Works for which tenders are already submitted The above statements should be furnished as per clauses 1.5 B of Section 3 of Qualification information of Standard Bid document as per the table. These documents shall be countersigned by engineer in-charge not below the rank of Executive Engineer True Technical Bid The quantities of work executed as prime contractor in the same name during the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 as per sub clause 1.4 of section 3 of standard bid document, as per relevant table. True Technical Bid Current certificate of the Registration in KPWD/CPWD True Technical Bid Each tenderer should further demonstrate liquid assets and / or availability of Credit facilities of Rs. 1,84,84,077.00 amount put to tender Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc, shall be enclosed as per the format under KW manual section 1.10 of section-3 of standard bid document. The format / information shall be as per certificate mentioned in the standard bid document. True Technical Bid The tenderer has to furnish the details of Technical Personnel working/Associated with him True Technical Bid The tenderer shall furnish the signed information on litigations if any in which the tenderer is involved. Other party, Employer, Details of dispute, Amount involved, Remarks showing present status True Technical Bid Each Tenderer should further demonstrate Availability by owning/hiring of the required/specified key & critical equipments for this work as per the table appended in tender notification sl.no. 15 in technical conditions here with by giving information about brief specification of the equipment as per 1.6 of clause 3.3 a in respect of this agreement copy should be enclosed for hiring. True Technical Bid Bid capacity the bidder shall necessarily enclose duly filled and completed tender capacity in enclosed format. True Technical Bid GST Registration Certificate. True Technical Bid The agency shall submit the total value of Civil Engineering Construction works executed and payments received in the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 as per sub clause 1.2 of section 3 of standard bid document as per relevant table. Enclose the certificate from chartered accountant with chartered accountant UDIN number. True Technical Bid PAN Card enclose PAN Card True Technical Bid Income tax returns of preceding last three years i.e., 2021-22, 2022-23 and 2023-24 True Technical Bid The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719483127000 version 0 createdDate None modifiedDate None blockNumber Estate Office, No.119, 1st Floor, West Wing, Udyanagiri, Hubli Bypass Road, Near Simikeri, Navanagar, Bagalkot 587104 street None city Bagalkot state Karnataka pin 587104
tenderRecallDTO	None