| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1719474596000 | 0 | None | None | Buildings | 1 Construction of Block level public health laboratory (BLPHL) at GH Tarikere in Chikkamagaluru District. (Civil Works) (Slice-1) | 4431379.42 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379670 | 119018 | None | V-1 P-8 I-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 115.46 | 115.46 | 125.4 | False | None | None | False | None | False | 14478.684 | 0 | | 3379671 | 119018 | None | V-1 P-8 I-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 123.97 | 123.97 | 178.2 | False | None | None | False | None | False | 22091.454 | 0 | | 3379672 | 119018 | None | V-1 P-7 I-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 323.3 | 323.3 | 160.38 | False | None | None | False | None | False | 51850.854 | 0 | | 3379673 | 119018 | None | V-2 P-5 I-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ---- etc., complete with all lead | Sqm | 143.42 | 143.42 | 200.06 | False | None | None | False | None | False | 28692.6052 | 0 | | 3379674 | 119018 | None | V-1 P-15 I-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 7279.03 | 7279.03 | 25.45 | False | None | None | False | None | False | 185251.3135 | 0 | | 3379675 | 119018 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Footings ---- etc., complete with all lead | Cum | 8252.25 | 8252.25 | 45.83 | False | None | None | False | None | False | 378200.6175 | 0 | | 3379676 | 119018 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Footings ---- etc., complete with all lead | Cum | 8252.25 | 8252.25 | 2.61 | False | None | None | False | None | False | 21538.3725 | 0 | | 3379677 | 119018 | None | V-1 P-16 I-2.3.2 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150 mm thickness, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Plinth Beam ---- etc., complete with all lead | Cum | 7875.79 | 7875.79 | 8.9 | False | None | None | False | None | False | 70094.531 | 0 | | 3379678 | 119018 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) Columns above plinth ---- etc., complete with all lead | Cum | 14138.87 | 14138.87 | 7.55 | False | None | None | False | None | False | 106748.4685 | 0 | | 3379679 | 119018 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Cills ---- etc., complete with all lead | Cum | 8316.98 | 8316.98 | 0.86 | False | None | None | False | None | False | 7152.6028 | 0 | | 3379680 | 119018 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Chajja ---- etc., complete with all lead | Cum | 12059.84 | 12059.84 | 1.84 | False | None | None | False | None | False | 22190.1056 | 0 | | 3379681 | 119018 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Plinth Beam, Roof Beam, Lintels ---- etc., complete with all lead | Cum | 13307.17 | 13307.17 | 23.16 | False | None | None | False | None | False | 308194.0572 | 0 | | 3379682 | 119018 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) RCC Slab ---- etc., complete with all lead | Cum | 12475.47 | 12475.47 | 29.18 | False | None | None | False | None | False | 364034.2146 | 0 | | 3379683 | 119018 | None | V-1 P-84 I-2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) ---- etc., complete with all lead | Tonne | 108726.04 | 108726.04 | 7.91 | False | None | None | False | None | False | 860022.9764 | 0 | | 3379684 | 119018 | None | V-2 P-17 I-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1592.17 | 1592.17 | 231.25 | False | None | None | False | None | False | 368189.3125 | 0 | | 3379685 | 119018 | None | V-2 P-17 I-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1341.8 | 1341.8 | 53.7 | False | None | None | False | None | False | 72054.66 | 0 | | 3379686 | 119018 | None | V-2 P-87 I-11.35.2.2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Kg | 693.99 | 693.99 | 25.2 | False | None | None | False | None | False | 17488.548 | 0 | | 3379687 | 119018 | None | V-2 P-88 I-11.37.2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications ---- etc., complete with all lead | Sqm | 1423.23 | 1423.23 | 1.2 | False | None | None | False | None | False | 1707.876 | 0 | | 3379688 | 119018 | None | V-2 P-88 I-11.36.2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on both the sids including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Sqm | 1194.74 | 1194.74 | 1.2 | False | None | None | False | None | False | 1433.688 | 0 | | 3379689 | 119018 | None | V-2 P-111 I-12.86 | Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6551.01 | 6551.01 | 36.45 | False | None | None | False | None | False | 238784.3145 | 0 | | 3379690 | 119018 | None | V-2 P-110 I-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6950.87 | 6950.87 | 1.62 | False | None | None | False | None | False | 11260.4094 | 0 | | 3379691 | 119018 | None | V-2 P-85 I-11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 575.91 | False | None | None | False | None | False | 128093.9022 | 0 | | 3379692 | 119018 | None | V-2 P-82 I-11.26.3 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes in cluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 82.5 | False | None | None | False | None | False | 18349.65 | 0 | | 3379693 | 119018 | None | V-2 P-100 I-12.13.1 | Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. ---- etc., complete with all lead | Cum | 120099.75 | 120099.75 | 0.2 | False | None | None | False | None | False | 24019.95 | 0 | | 3379694 | 119018 | None | V-2 P-106 I-12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. ---- etc., complete with all lead | Sqm | 4037.56 | 4037.56 | 12.2 | False | None | None | False | None | False | 49258.232 | 0 | | 3379695 | 119018 | None | V-2 P-111 I-12.93.2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately).Size 62 x 125mm ---- etc., complete with all lead | Sqm | 928.57 | 928.57 | 20.4 | False | None | None | False | None | False | 18942.828 | 0 | | 3379696 | 119018 | None | V-2 P-112 I-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete with all lead | Sqm | 4235.67 | 4235.67 | 7.5 | False | None | None | False | None | False | 31767.525 | 0 | | 3379697 | 119018 | None | V-2 P-105 I-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead | Nos | 1234.85 | 1234.85 | 4.0 | False | None | None | False | None | False | 4939.4 | 0 | | 3379698 | 119018 | None | V-2 P-69 I-10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead | Nos | 72.92 | 72.92 | 24.0 | False | None | None | False | None | False | 1750.08 | 0 | | 3379699 | 119018 | None | V-2 P-107 I-12.59 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead | Nos | 1353.96 | 1353.96 | 4.0 | False | None | None | False | None | False | 5415.84 | 0 | | 3379700 | 119018 | None | V-2 P-107 I-12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead | Nos | 1278.6 | 1278.6 | 4.0 | False | None | None | False | None | False | 5114.4 | 0 | | 3379701 | 119018 | None | V-2 P-107 I-12.61 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete ---- etc., complete with all lead | Nos | 1203.25 | 1203.25 | 4.0 | False | None | None | False | None | False | 4813.0 | 0 | | 3379702 | 119018 | None | V-2 P-107 I-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead | Nos | 288.05 | 288.05 | 8.0 | False | None | None | False | None | False | 2304.4 | 0 | | 3379703 | 119018 | None | V-2 P-107 I-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete ---- etc., complete with all lead | Nos | 158.0 | 158.0 | 8.0 | False | None | None | False | None | False | 1264.0 | 0 | | 3379704 | 119018 | None | V-2 P-107 I-12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- etc., complete with all lead | Nos | 66.85 | 66.85 | 4.0 | False | None | None | False | None | False | 267.4 | 0 | | 3379705 | 119018 | None | V-2 P-108 I-12.75 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- etc., complete with all lead | Nos | 334.24 | 334.24 | 12.0 | False | None | None | False | None | False | 4010.88 | 0 | | 3379706 | 119018 | None | PWD SR 18-19 P-117 I-15.37 | KSRB 15.9 Providing and fixing corner beads 45x45mm size manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along exposed corners of walls, coloumns, lintels including cost of materials, labour for fixing complete . (length of mesh be measured for payment) ---- etc., complete with all lead | Rmtr | 34.03 | 34.03 | 24.3 | False | None | None | False | None | False | 826.929 | 0 | | 3379707 | 119018 | None | V-2 P-60 I-9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 1391.63 | 1391.63 | 155.7 | False | None | None | False | None | False | 216676.791 | 0 | | 3379708 | 119018 | None | V-2 P-60 I-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- etc., complete with all lead | Sqm | 1080.49 | 1080.49 | 8.3 | False | None | None | False | None | False | 8968.067 | 0 | | 3379709 | 119018 | None | V-2 P-71 I-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete ---- etc., complete with all lead | Sqm | 1344.23 | 1344.23 | 71.4 | False | None | None | False | None | False | 95978.022 | 0 | | 3379710 | 119018 | None | V-2 P-64 I-9.30 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 6475.65 | 6475.65 | 2.7 | False | None | None | False | None | False | 17484.255 | 0 | | 3379711 | 119018 | None | V-2 P-63 I-9.28 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 5200.7 | 5200.7 | 2.5 | False | None | None | False | None | False | 13001.75 | 0 | | 3379712 | 119018 | None | V-2 P-41 I-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 144.6 | False | None | None | False | None | False | 49033.86 | 0 | | 3379713 | 119018 | None | V-2 P-41 I-8.8 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding ,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ( Inside) ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 646.6 | False | None | None | False | None | False | 219262.06 | 0 | | 3379714 | 119018 | None | V-2 P-41 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( outside) ---- etc., complete with all lead | Sqm | 467.93 | 467.93 | 323.1 | False | None | None | False | None | False | 151188.183 | 0 | | 3379715 | 119018 | None | V-2 P-47 I-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 64.42 | 64.42 | 29.2 | False | None | None | False | None | False | 1881.064 | 0 | | 3379716 | 119018 | None | V-2 P-48 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 139.77 | 139.77 | 65.0 | False | None | None | False | None | False | 9085.05 | 0 | | 3379717 | 119018 | None | V-2 P-48 I-8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 154.36 | 154.36 | 791.2 | False | None | None | False | None | False | 122129.632 | 0 | | 3379718 | 119018 | None | V-2 P-46 I-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 211.48 | 211.48 | 323.1 | False | None | None | False | None | False | 68329.188 | 0 | | 3379719 | 119018 | None | V-2 P-47 I-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 60.77 | 60.77 | 35.8 | False | None | None | False | None | False | 2175.566 | 0 | | 3379720 | 119018 | None | V-2 P-150 I-15.7 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead | Sqm | 747.47 | 747.47 | 4.8 | False | None | None | False | None | False | 3587.856 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 2 Construction of Block level public health laboratory (BLPHL) at GH Tarikere in Chikkamagaluru District. (Water Supply & Sanitary Works) (Slice-1) | 192999.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379721 | 119019 | None | P-122 I.No.13.32.3 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 25 mm Dia ---- etc., complete with all lead | m | 579.75 | 579.75 | 45.0 | False | None | None | False | None | False | 26088.75 | 0 | | 3379722 | 119019 | None | P-122 I.No.13.32.4 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 32 mm Dia ---- etc., complete with all lead | m | 676.98 | 676.98 | 35.0 | False | None | None | False | None | False | 23694.3 | 0 | | 3379723 | 119019 | None | P-119 I.No.13.12 of Vol.2 | Providing and fixing brass bib cock of approved quality ---- etc., complete with all lead | Nos | 771.78 | 771.78 | 8.0 | False | None | None | False | None | False | 6174.24 | 0 | | 3379724 | 119019 | None | P-117 I.No.13.4.1 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore ---- etc., complete with all lead | Nos | 667.25 | 667.25 | 4.0 | False | None | None | False | None | False | 2669.0 | 0 | | 3379725 | 119019 | None | P-117 I.No.13.4.2 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore ---- etc., complete with all lead | Nos | 726.81 | 726.81 | 4.0 | False | None | None | False | None | False | 2907.24 | 0 | | 3379726 | 119019 | None | P-131 I.No.14.1.1 of Vol.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Each | 5936.01 | 5936.01 | 2.0 | False | None | None | False | None | False | 11872.02 | 0 | | 3379727 | 119019 | None | P-124 I.No.13.41 of Vol.2 | Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729. ---- etc., complete with all lead | Each | 1629.85 | 1629.85 | 8.0 | False | None | None | False | None | False | 13038.8 | 0 | | 3379728 | 119019 | None | P-125 I.No.13.48 of Vol.2 | Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter ---- etc., complete with all lead | Rmtr | 353.68 | 353.68 | 55.0 | False | None | None | False | None | False | 19452.4 | 0 | | 3379729 | 119019 | None | P.No.6 I.No.1.6.1 of Vol.1 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m ---- etc., complete with all lead | Cum | 588.25 | 588.25 | 15.0 | False | None | None | False | None | False | 8823.75 | 0 | | 3379730 | 119019 | None | P.No.191 I.No.16.10 of Vol.5 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead | Nos | 5148.43 | 5148.43 | 5.0 | False | None | None | False | None | False | 25742.15 | 0 | | 3379731 | 119019 | None | P-160, I-1.10 of Vol 1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications ---- etc., complete with all lead | Cum | 194.46 | 194.46 | 8.0 | False | None | None | False | None | False | 1555.68 | 0 | | 3379732 | 119019 | None | P-123, I-13.36 of Vol 2 | Cutting holes upto 30X30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks. ---- etc., complete with all lead | Each | 392.57 | 392.57 | 20.0 | False | None | None | False | None | False | 7851.4 | 0 | | 3379733 | 119019 | None | P-123, I-13.37 of Vol 2 | Cutting holes upto 15X15cm in RCC floors and roofs for passing drain pipe etc.,and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including finishing complete so as to make it leak proof. ---- etc., complete with all lead | Each | 380.42 | 380.42 | 10.0 | False | None | None | False | None | False | 3804.2 | 0 | | 3379734 | 119019 | None | P-120 I-13.22.2 of Vol 2 | Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid ---- etc., complete with all lead | Each | 245.51 | 245.51 | 10.0 | False | None | None | False | None | False | 2455.1 | 0 | | 3379735 | 119019 | None | P-20 I-13.23.2of Vol 2 | Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 20 mm nominal bore, 120 mm long, weighing not less than 198 g ---- etc., complete with all lead | Nos | 300.2 | 300.2 | 1.0 | False | None | None | False | None | False | 300.2 | 0 | | 3379736 | 119019 | None | P-119 I-13.15 of Vol 2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ---- etc., complete with all lead | Nos | 881.17 | 881.17 | 1.0 | False | None | None | False | None | False | 881.17 | 0 | | 3379737 | 119019 | None | P-119 I-13.16 of Vol 2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete with all lead | Nos | 753.55 | 753.55 | 10.0 | False | None | None | False | None | False | 7535.5 | 0 | | 3379738 | 119019 | None | P-123 I-13.34 of Vol 2 | Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank ---- etc., complete with all lead | l | 10.94 | 10.94 | 2000.0 | False | None | None | False | None | False | 21880.0 | 0 | | 3379739 | 119019 | None | P-123 I-13.39 of Vol 2 | Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design ---- etc., complete with all lead | Each | 3136.95 | 3136.95 | 2.0 | False | None | None | False | None | False | 6273.9 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 1 Construction of Block level public health laboratory (BLPHL) at GH Tarikere in Chikkamagaluru District. (Electrical Works) (Slice-1) | 366737.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379740 | 119020 | None | 2.2.1 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch ---- etc., complete with all lead | Point | 326.94 | 326.94 | 22.0 | False | None | None | False | None | False | 7192.68 | 0 | | 3379741 | 119020 | None | 2.2.2 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 460.64 | 460.64 | 16.0 | False | None | None | False | None | False | 7370.24 | 0 | | 3379742 | 119020 | None | 2.2.3 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 674.55 | 674.55 | 15.0 | False | None | None | False | None | False | 10118.25 | 0 | | 3379743 | 119020 | None | 3.4.2 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 3 way ---- etc., complete with all lead | Each | 193.25 | 193.25 | 13.0 | False | None | None | False | None | False | 2512.25 | 0 | | 3379744 | 119020 | None | 3.4.3 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4 - 5 way ---- etc., complete with all lead | Each | 215.13 | 215.13 | 12.0 | False | None | None | False | None | False | 2581.56 | 0 | | 3379745 | 119020 | None | 3.4.4 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 6 way ---- etc., complete with all lead | Each | 267.39 | 267.39 | 6.0 | False | None | None | False | None | False | 1604.34 | 0 | | 3379746 | 119020 | None | 3.4.5 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 8 way ---- etc., complete with all lead | Each | 317.22 | 317.22 | 19.0 | False | None | None | False | None | False | 6027.18 | 0 | | 3379747 | 119020 | None | 3.4.7 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 16 way ---- etc., complete with all lead | Each | 441.19 | 441.19 | 7.0 | False | None | None | False | None | False | 3088.33 | 0 | | 3379748 | 119020 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 3 module ---- etc., complete with all lead | Each | 195.68 | 195.68 | 13.0 | False | None | None | False | None | False | 2543.84 | 0 | | 3379749 | 119020 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 4 module ---- etc., complete with all lead | Each | 212.7 | 212.7 | 12.0 | False | None | None | False | None | False | 2552.4 | 0 | | 3379750 | 119020 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 6 module ---- etc., complete with all lead | Each | 284.4 | 284.4 | 6.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379751 | 119020 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 8 module ---- etc., complete with all lead | Each | 345.17 | 345.17 | 19.0 | False | None | None | False | None | False | 6558.23 | 0 | | 3379752 | 119020 | None | 3.5.7 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 16 module ---- etc., complete with all lead | Each | 482.51 | 482.51 | 7.0 | False | None | None | False | None | False | 3377.57 | 0 | | 3379753 | 119020 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps one way switch ---- etc., complete with all lead | Each | 123.97 | 123.97 | 84.0 | False | None | None | False | None | False | 10413.48 | 0 | | 3379754 | 119020 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way sockets ---- etc., complete with all lead | Each | 207.83 | 207.83 | 16.0 | False | None | None | False | None | False | 3325.28 | 0 | | 3379755 | 119020 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 stepped fan Regulator's ---- etc., complete with all lead | Each | 433.9 | 433.9 | 12.0 | False | None | None | False | None | False | 5206.8 | 0 | | 3379756 | 119020 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 129316 amps one way switch ---- etc., complete with all lead | Each | 218.77 | 218.77 | 34.0 | False | None | None | False | None | False | 7438.18 | 0 | | 3379757 | 119020 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps universal sockets ---- etc., complete with all lead | Each | 286.83 | 286.83 | 34.0 | False | None | None | False | None | False | 9752.22 | 0 | | 3379758 | 119020 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch ---- etc., complete with all lead | Each | 396.22 | 396.22 | 3.0 | False | None | None | False | None | False | 1188.66 | 0 | | 3379759 | 119020 | None | I-1.13 | Supply and fixing one metal Fan box with round hook ---- etc., complete with all lead | Each | 142.2 | 142.2 | 12.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379760 | 119020 | None | 1.2.1 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
19/20 mm dia 2 mm thick ---- etc., complete with all lead | Mtr | 80.22 | 80.22 | 130.0 | False | None | None | False | None | False | 10428.6 | 0 | | 3379761 | 119020 | None | 1.3.1 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2mm thick ---- etc., complete with all lead | Mtr | 82.65 | 82.65 | 250.0 | False | None | None | False | None | False | 20662.5 | 0 | | 3379762 | 119020 | None | 1.3.2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 25 mm dia ---- etc., complete with all lead | Mtr | 96.02 | 96.02 | 220.0 | False | None | None | False | None | False | 21124.4 | 0 | | 3379763 | 119020 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 1.5 Sq.mm ---- etc., complete with all lead | Mtr | 31.6 | 31.6 | 650.0 | False | None | None | False | None | False | 20540.0 | 0 | | 3379764 | 119020 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 2.5 sq.mm ---- etc., complete with all lead | Mtr | 51.05 | 51.05 | 450.0 | False | None | None | False | None | False | 22972.5 | 0 | | 3379765 | 119020 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 4 sq.mm ---- etc., complete with all lead | Mtr | 76.57 | 76.57 | 100.0 | False | None | None | False | None | False | 7657.0 | 0 | | 3379766 | 119020 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 6 sq.mm ---- etc., complete with all lead | Mtr | 111.82 | 111.82 | 50.0 | False | None | None | False | None | False | 5591.0 | 0 | | 3379767 | 119020 | None | 2.3.6 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.10 sq.mm ---- etc., complete with all lead | Mtr | 202.97 | 202.97 | 60.0 | False | None | None | False | None | False | 12178.2 | 0 | | 3379768 | 119020 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser.12 Way SP & N ---- etc., complete with all lead | Each | 2830.67 | 2830.67 | 2.0 | False | None | None | False | None | False | 5661.34 | 0 | | 3379769 | 119020 | None | 5.18.1 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 Amps SP ---- etc., complete with all lead | Each | 504.39 | 504.39 | 18.0 | False | None | None | False | None | False | 9079.02 | 0 | | 3379770 | 119020 | None | 5.18.4 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 A DP ---- etc., complete with all lead | Each | 898.18 | 898.18 | 6.0 | False | None | None | False | None | False | 5389.08 | 0 | | 3379771 | 119020 | None | 5.20.1 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole ---- etc., complete with all lead | Each | 5198.27 | 5198.27 | 2.0 | False | None | None | False | None | False | 10396.54 | 0 | | 3379772 | 119020 | None | 32.08 V-6 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- etc., complete with all lead | Km | 218582.4 | 218582.4 | 0.1 | False | None | None | False | None | False | 21858.24 | 0 | | 3379773 | 119020 | None | 21.05 V-6 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff ---- etc., complete with all lead | Km | 25384.84 | 25384.84 | 0.1 | False | None | None | False | None | False | 2538.484 | 0 | | 3379774 | 119020 | None | 48.05( V-6)2021-22 | GI Pipe B - Class as per IS-1239 GI Pipe - 50 mm Dia ---- etc., complete with all lead | Mtr | 393.79 | 393.79 | 5.0 | False | None | None | False | None | False | 1968.95 | 0 | | 3379775 | 119020 | None | I-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead | No | 4266.05 | 4266.05 | 2.0 | False | None | None | False | None | False | 8532.1 | 0 | | 3379776 | 119020 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip ---- etc., complete with all lead | Mtr | 99.66 | 99.66 | 18.0 | False | None | None | False | None | False | 1793.88 | 0 | | 3379777 | 119020 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead | Mtr | 46.19 | 46.19 | 45.0 | False | None | None | False | None | False | 2078.55 | 0 | | 3379778 | 119020 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG ---- etc., complete with all lead | Sq CM | 0.52 | 0.52 | 42000.0 | False | None | None | False | None | False | 21840.0 | 0 | | 3379779 | 119020 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2995.96 | 2995.96 | 3.0 | False | None | None | False | None | False | 8987.88 | 0 | | 3379780 | 119020 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead | Mtr | 370.7 | 370.7 | 3.0 | False | None | None | False | None | False | 1112.1 | 0 | | 3379781 | 119020 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 3379782 | 119020 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead | Each | 3753.16 | 3753.16 | 6.0 | False | None | None | False | None | False | 22518.96 | 0 | | 3379783 | 119020 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead | Each | 11321.45 | 11321.45 | 1.0 | False | None | None | False | None | False | 11321.45 | 0 | | 3379784 | 119020 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead | Each | 625.93 | 625.93 | 3.0 | False | None | None | False | None | False | 1877.79 | 0 | | 3379785 | 119020 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead | Each | 683.05 | 683.05 | 3.0 | False | None | None | False | None | False | 2049.15 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 2 Construction of Block level public health laboratory (BLPHL) at GH Kadur in Chikkamagaluru District. (Civil Works) (Slice-2) | 4431379.42 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379786 | 119021 | None | V-1 P-8 I-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 115.46 | 115.46 | 125.4 | False | None | None | False | None | False | 14478.684 | 0 | | 3379787 | 119021 | None | V-1 P-8 I-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 123.97 | 123.97 | 178.2 | False | None | None | False | None | False | 22091.454 | 0 | | 3379788 | 119021 | None | V-1 P-7 I-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 323.3 | 323.3 | 160.38 | False | None | None | False | None | False | 51850.854 | 0 | | 3379789 | 119021 | None | V-2 P-5 I-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ---- etc., complete with all lead | Sqm | 143.42 | 143.42 | 200.06 | False | None | None | False | None | False | 28692.6052 | 0 | | 3379790 | 119021 | None | V-1 P-15 I-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 7279.03 | 7279.03 | 25.45 | False | None | None | False | None | False | 185251.3135 | 0 | | 3379791 | 119021 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Footings ---- etc., complete with all lead | Cum | 8252.25 | 8252.25 | 45.83 | False | None | None | False | None | False | 378200.6175 | 0 | | 3379792 | 119021 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Footings ---- etc., complete with all lead | Cum | 8252.25 | 8252.25 | 2.61 | False | None | None | False | None | False | 21538.3725 | 0 | | 3379793 | 119021 | None | V-1 P-16 I-2.3.2 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150 mm thickness, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Plinth Beam ---- etc., complete with all lead | Cum | 7875.79 | 7875.79 | 8.9 | False | None | None | False | None | False | 70094.531 | 0 | | 3379794 | 119021 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) Columns above plinth ---- etc., complete with all lead | Cum | 14138.87 | 14138.87 | 7.55 | False | None | None | False | None | False | 106748.4685 | 0 | | 3379795 | 119021 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Cills ---- etc., complete with all lead | Cum | 8316.98 | 8316.98 | 0.86 | False | None | None | False | None | False | 7152.6028 | 0 | | 3379796 | 119021 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Chajja ---- etc., complete with all lead | Cum | 12059.84 | 12059.84 | 1.84 | False | None | None | False | None | False | 22190.1056 | 0 | | 3379797 | 119021 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Plinth Beam, Roof Beam, Lintels ---- etc., complete with all lead | Cum | 13307.17 | 13307.17 | 23.16 | False | None | None | False | None | False | 308194.0572 | 0 | | 3379798 | 119021 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) RCC Slab ---- etc., complete with all lead | Cum | 12475.47 | 12475.47 | 29.18 | False | None | None | False | None | False | 364034.2146 | 0 | | 3379799 | 119021 | None | V-1 P-84 I-2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) ---- etc., complete with all lead | Tonne | 108726.04 | 108726.04 | 7.91 | False | None | None | False | None | False | 860022.9764 | 0 | | 3379800 | 119021 | None | V-2 P-17 I-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1592.17 | 1592.17 | 231.25 | False | None | None | False | None | False | 368189.3125 | 0 | | 3379801 | 119021 | None | V-2 P-17 I-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1341.8 | 1341.8 | 53.7 | False | None | None | False | None | False | 72054.66 | 0 | | 3379802 | 119021 | None | V-2 P-87 I-11.35.2.2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Kg | 693.99 | 693.99 | 25.2 | False | None | None | False | None | False | 17488.548 | 0 | | 3379803 | 119021 | None | V-2 P-88 I-11.37.2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications ---- etc., complete with all lead | Sqm | 1423.23 | 1423.23 | 1.2 | False | None | None | False | None | False | 1707.876 | 0 | | 3379804 | 119021 | None | V-2 P-88 I-11.36.2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on both the sids including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Sqm | 1194.74 | 1194.74 | 1.2 | False | None | None | False | None | False | 1433.688 | 0 | | 3379805 | 119021 | None | V-2 P-111 I-12.86 | Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6551.01 | 6551.01 | 36.45 | False | None | None | False | None | False | 238784.3145 | 0 | | 3379806 | 119021 | None | V-2 P-110 I-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6950.87 | 6950.87 | 1.62 | False | None | None | False | None | False | 11260.4094 | 0 | | 3379807 | 119021 | None | V-2 P-85 I-11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 575.91 | False | None | None | False | None | False | 128093.9022 | 0 | | 3379808 | 119021 | None | V-2 P-82 I-11.26.3 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes in cluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 82.5 | False | None | None | False | None | False | 18349.65 | 0 | | 3379809 | 119021 | None | V-2 P-100 I-12.13.1 | Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. ---- etc., complete with all lead | Cum | 120099.75 | 120099.75 | 0.2 | False | None | None | False | None | False | 24019.95 | 0 | | 3379810 | 119021 | None | V-2 P-106 I-12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. ---- etc., complete with all lead | Sqm | 4037.56 | 4037.56 | 12.2 | False | None | None | False | None | False | 49258.232 | 0 | | 3379811 | 119021 | None | V-2 P-111 I-12.93.2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately).Size 62 x 125mm ---- etc., complete with all lead | Sqm | 928.57 | 928.57 | 20.4 | False | None | None | False | None | False | 18942.828 | 0 | | 3379812 | 119021 | None | V-2 P-112 I-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete with all lead | Sqm | 4235.67 | 4235.67 | 7.5 | False | None | None | False | None | False | 31767.525 | 0 | | 3379813 | 119021 | None | V-2 P-105 I-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead | Nos | 1234.85 | 1234.85 | 4.0 | False | None | None | False | None | False | 4939.4 | 0 | | 3379814 | 119021 | None | V-2 P-69 I-10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead | Nos | 72.92 | 72.92 | 24.0 | False | None | None | False | None | False | 1750.08 | 0 | | 3379815 | 119021 | None | V-2 P-107 I-12.59 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead | Nos | 1353.96 | 1353.96 | 4.0 | False | None | None | False | None | False | 5415.84 | 0 | | 3379816 | 119021 | None | V-2 P-107 I-12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead | Nos | 1278.6 | 1278.6 | 4.0 | False | None | None | False | None | False | 5114.4 | 0 | | 3379817 | 119021 | None | V-2 P-107 I-12.61 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete ---- etc., complete with all lead | Nos | 1203.25 | 1203.25 | 4.0 | False | None | None | False | None | False | 4813.0 | 0 | | 3379818 | 119021 | None | V-2 P-107 I-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead | Nos | 288.05 | 288.05 | 8.0 | False | None | None | False | None | False | 2304.4 | 0 | | 3379819 | 119021 | None | V-2 P-107 I-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete ---- etc., complete with all lead | Nos | 158.0 | 158.0 | 8.0 | False | None | None | False | None | False | 1264.0 | 0 | | 3379820 | 119021 | None | V-2 P-107 I-12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- etc., complete with all lead | Nos | 66.85 | 66.85 | 4.0 | False | None | None | False | None | False | 267.4 | 0 | | 3379821 | 119021 | None | V-2 P-108 I-12.75 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- etc., complete with all lead | Nos | 334.24 | 334.24 | 12.0 | False | None | None | False | None | False | 4010.88 | 0 | | 3379822 | 119021 | None | PWD SR 18-19 P-117 I-15.37 | KSRB 15.9 Providing and fixing corner beads 45x45mm size manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along exposed corners of walls, coloumns, lintels including cost of materials, labour for fixing complete . (length of mesh be measured for payment) ---- etc., complete with all lead | Rmtr | 34.03 | 34.03 | 24.3 | False | None | None | False | None | False | 826.929 | 0 | | 3379823 | 119021 | None | V-2 P-60 I-9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 1391.63 | 1391.63 | 155.7 | False | None | None | False | None | False | 216676.791 | 0 | | 3379824 | 119021 | None | V-2 P-60 I-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- etc., complete with all lead | Sqm | 1080.49 | 1080.49 | 8.3 | False | None | None | False | None | False | 8968.067 | 0 | | 3379825 | 119021 | None | V-2 P-71 I-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete ---- etc., complete with all lead | Sqm | 1344.23 | 1344.23 | 71.4 | False | None | None | False | None | False | 95978.022 | 0 | | 3379826 | 119021 | None | V-2 P-64 I-9.30 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 6475.65 | 6475.65 | 2.7 | False | None | None | False | None | False | 17484.255 | 0 | | 3379827 | 119021 | None | V-2 P-63 I-9.28 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 5200.7 | 5200.7 | 2.5 | False | None | None | False | None | False | 13001.75 | 0 | | 3379828 | 119021 | None | V-2 P-41 I-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 144.6 | False | None | None | False | None | False | 49033.86 | 0 | | 3379829 | 119021 | None | V-2 P-41 I-8.8 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding ,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ( Inside) ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 646.6 | False | None | None | False | None | False | 219262.06 | 0 | | 3379830 | 119021 | None | V-2 P-41 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( outside) ---- etc., complete with all lead | Sqm | 467.93 | 467.93 | 323.1 | False | None | None | False | None | False | 151188.183 | 0 | | 3379831 | 119021 | None | V-2 P-47 I-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 64.42 | 64.42 | 29.2 | False | None | None | False | None | False | 1881.064 | 0 | | 3379832 | 119021 | None | V-2 P-48 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 139.77 | 139.77 | 65.0 | False | None | None | False | None | False | 9085.05 | 0 | | 3379833 | 119021 | None | V-2 P-48 I-8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 154.36 | 154.36 | 791.2 | False | None | None | False | None | False | 122129.632 | 0 | | 3379834 | 119021 | None | V-2 P-46 I-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 211.48 | 211.48 | 323.1 | False | None | None | False | None | False | 68329.188 | 0 | | 3379835 | 119021 | None | V-2 P-47 I-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 60.77 | 60.77 | 35.8 | False | None | None | False | None | False | 2175.566 | 0 | | 3379836 | 119021 | None | V-2 P-150 I-15.7 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead | Sqm | 747.47 | 747.47 | 4.8 | False | None | None | False | None | False | 3587.856 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 2 Construction of Block level public health laboratory (BLPHL) at GH Kadur in Chikkamagaluru District. (Water Supply & Sanitary Works) (Slice-2) | 192999.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379837 | 119022 | None | P-122 I.No.13.32.3 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 25 mm Dia ---- etc., complete with all lead | m | 579.75 | 579.75 | 45.0 | False | None | None | False | None | False | 26088.75 | 0 | | 3379838 | 119022 | None | P-122 I.No.13.32.4 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 32 mm Dia ---- etc., complete with all lead | m | 676.98 | 676.98 | 35.0 | False | None | None | False | None | False | 23694.3 | 0 | | 3379839 | 119022 | None | P-119 I.No.13.12 of Vol.2 | Providing and fixing brass bib cock of approved quality ---- etc., complete with all lead | Nos | 771.78 | 771.78 | 8.0 | False | None | None | False | None | False | 6174.24 | 0 | | 3379840 | 119022 | None | P-117 I.No.13.4.1 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore ---- etc., complete with all lead | Nos | 667.25 | 667.25 | 4.0 | False | None | None | False | None | False | 2669.0 | 0 | | 3379841 | 119022 | None | P-117 I.No.13.4.2 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore ---- etc., complete with all lead | Nos | 726.81 | 726.81 | 4.0 | False | None | None | False | None | False | 2907.24 | 0 | | 3379842 | 119022 | None | P.No.131 I.No.14.1.1 of Vol.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Each | 5936.01 | 5936.01 | 2.0 | False | None | None | False | None | False | 11872.02 | 0 | | 3379843 | 119022 | None | P-124 I.No.13.41 of Vol.2 | Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729. ---- etc., complete with all lead | Each | 1629.85 | 1629.85 | 8.0 | False | None | None | False | None | False | 13038.8 | 0 | | 3379844 | 119022 | None | P-125 I.No.13.48 of Vol.2 | Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter ---- etc., complete with all lead | Rmtr | 353.68 | 353.68 | 55.0 | False | None | None | False | None | False | 19452.4 | 0 | | 3379845 | 119022 | None | P.No.6 I.No.1.6.1 of Vol.1 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m ---- etc., complete with all lead | Cum | 588.25 | 588.25 | 15.0 | False | None | None | False | None | False | 8823.75 | 0 | | 3379846 | 119022 | None | P.No.191 I.No.16.10 of Vol.5 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead | Nos | 5148.43 | 5148.43 | 5.0 | False | None | None | False | None | False | 25742.15 | 0 | | 3379847 | 119022 | None | P-160, I-1.10 of Vol 1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications ---- etc., complete with all lead | Cum | 194.46 | 194.46 | 8.0 | False | None | None | False | None | False | 1555.68 | 0 | | 3379848 | 119022 | None | P-123, I-13.36 of Vol 2 | Cutting holes upto 30X30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks. ---- etc., complete with all lead | Each | 392.57 | 392.57 | 20.0 | False | None | None | False | None | False | 7851.4 | 0 | | 3379849 | 119022 | None | P-123, I-13.37 of Vol 2 | Cutting holes upto 15X15cm in RCC floors and roofs for passing drain pipe etc.,and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including finishing complete so as to make it leak proof. ---- etc., complete with all lead | Each | 380.42 | 380.42 | 10.0 | False | None | None | False | None | False | 3804.2 | 0 | | 3379850 | 119022 | None | P-120 I-13.22.2 of Vol 2 | Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid ---- etc., complete with all lead | Each | 245.51 | 245.51 | 10.0 | False | None | None | False | None | False | 2455.1 | 0 | | 3379851 | 119022 | None | P-20 I-13.23 .2of Vol 2 | Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 20 mm nominal bore, 120 mm long, weighing not less than 198 g ---- etc., complete with all lead | Nos | 300.2 | 300.2 | 1.0 | False | None | None | False | None | False | 300.2 | 0 | | 3379852 | 119022 | None | P-119 I-13.15 of Vol 2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ---- etc., complete with all lead | Nos | 881.17 | 881.17 | 1.0 | False | None | None | False | None | False | 881.17 | 0 | | 3379853 | 119022 | None | P-119 I-13.16 of Vol 2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete with all lead | Nos | 753.55 | 753.55 | 10.0 | False | None | None | False | None | False | 7535.5 | 0 | | 3379854 | 119022 | None | P-123 I-13.34 of Vol 2 | Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank ---- etc., complete with all lead | l | 10.94 | 10.94 | 2000.0 | False | None | None | False | None | False | 21880.0 | 0 | | 3379855 | 119022 | None | P-123 I-13.39 of Vol 2 | Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design ---- etc., complete with all lead | Each | 3136.95 | 3136.95 | 2.0 | False | None | None | False | None | False | 6273.9 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 2 Construction of Block level public health laboratory (BLPHL) at GH Kadur in Chikkamagaluru District. (Electrical Works) (Slice-2) | 366737.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379856 | 119023 | None | 2.2.1 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch ---- etc., complete with all lead | Point | 326.94 | 326.94 | 22.0 | False | None | None | False | None | False | 7192.68 | 0 | | 3379857 | 119023 | None | 2.2.2 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 460.64 | 460.64 | 16.0 | False | None | None | False | None | False | 7370.24 | 0 | | 3379858 | 119023 | None | 2.2.3 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 674.55 | 674.55 | 15.0 | False | None | None | False | None | False | 10118.25 | 0 | | 3379859 | 119023 | None | 3.4.2 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 3 way ---- etc., complete with all lead | Each | 193.25 | 193.25 | 13.0 | False | None | None | False | None | False | 2512.25 | 0 | | 3379860 | 119023 | None | 3.4.3 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4 - 5 way ---- etc., complete with all lead | Each | 215.13 | 215.13 | 12.0 | False | None | None | False | None | False | 2581.56 | 0 | | 3379861 | 119023 | None | 3.4.4 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 6 way ---- etc., complete with all lead | Each | 267.39 | 267.39 | 6.0 | False | None | None | False | None | False | 1604.34 | 0 | | 3379862 | 119023 | None | 3.4.5 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 8 way ---- etc., complete with all lead | Each | 317.22 | 317.22 | 19.0 | False | None | None | False | None | False | 6027.18 | 0 | | 3379863 | 119023 | None | 3.4.7 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 16 way ---- etc., complete with all lead | Each | 441.19 | 441.19 | 7.0 | False | None | None | False | None | False | 3088.33 | 0 | | 3379864 | 119023 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 3 module ---- etc., complete with all lead | Each | 195.68 | 195.68 | 13.0 | False | None | None | False | None | False | 2543.84 | 0 | | 3379865 | 119023 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 4 module ---- etc., complete with all lead | Each | 212.7 | 212.7 | 12.0 | False | None | None | False | None | False | 2552.4 | 0 | | 3379866 | 119023 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 6 module ---- etc., complete with all lead | Each | 284.4 | 284.4 | 6.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379867 | 119023 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 8 module ---- etc., complete with all lead | Each | 345.17 | 345.17 | 19.0 | False | None | None | False | None | False | 6558.23 | 0 | | 3379868 | 119023 | None | 3.5.7 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 16 module ---- etc., complete with all lead | Each | 482.51 | 482.51 | 7.0 | False | None | None | False | None | False | 3377.57 | 0 | | 3379869 | 119023 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps one way switch ---- etc., complete with all lead | Each | 123.97 | 123.97 | 84.0 | False | None | None | False | None | False | 10413.48 | 0 | | 3379870 | 119023 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way sockets ---- etc., complete with all lead | Each | 207.83 | 207.83 | 16.0 | False | None | None | False | None | False | 3325.28 | 0 | | 3379871 | 119023 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 stepped fan Regulator's ---- etc., complete with all lead | Each | 433.9 | 433.9 | 12.0 | False | None | None | False | None | False | 5206.8 | 0 | | 3379872 | 119023 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 129316 amps one way switch ---- etc., complete with all lead | Each | 218.77 | 218.77 | 34.0 | False | None | None | False | None | False | 7438.18 | 0 | | 3379873 | 119023 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps universal sockets ---- etc., complete with all lead | Each | 286.83 | 286.83 | 34.0 | False | None | None | False | None | False | 9752.22 | 0 | | 3379874 | 119023 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch ---- etc., complete with all lead | Each | 396.22 | 396.22 | 3.0 | False | None | None | False | None | False | 1188.66 | 0 | | 3379875 | 119023 | None | I-1.13 | Supply and fixing one metal Fan box with round hook ---- etc., complete with all lead | Each | 142.2 | 142.2 | 12.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379876 | 119023 | None | 1.2.1 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
19/20 mm dia 2 mm thick ---- etc., complete with all lead | Mtr | 80.22 | 80.22 | 130.0 | False | None | None | False | None | False | 10428.6 | 0 | | 3379877 | 119023 | None | 1.3.1 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2mm thick ---- etc., complete with all lead | Mtr | 82.65 | 82.65 | 250.0 | False | None | None | False | None | False | 20662.5 | 0 | | 3379878 | 119023 | None | 1.3.2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 25 mm dia ---- etc., complete with all lead | Mtr | 96.02 | 96.02 | 220.0 | False | None | None | False | None | False | 21124.4 | 0 | | 3379879 | 119023 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 1.5 Sq.mm ---- etc., complete with all lead | Mtr | 31.6 | 31.6 | 650.0 | False | None | None | False | None | False | 20540.0 | 0 | | 3379880 | 119023 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 2.5 sq.mm ---- etc., complete with all lead | Mtr | 51.05 | 51.05 | 450.0 | False | None | None | False | None | False | 22972.5 | 0 | | 3379881 | 119023 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 4 sq.mm ---- etc., complete with all lead | Mtr | 76.57 | 76.57 | 100.0 | False | None | None | False | None | False | 7657.0 | 0 | | 3379882 | 119023 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 6 sq.mm ---- etc., complete with all lead | Mtr | 111.82 | 111.82 | 50.0 | False | None | None | False | None | False | 5591.0 | 0 | | 3379883 | 119023 | None | 2.3.6 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.10 sq.mm ---- etc., complete with all lead | Mtr | 202.97 | 202.97 | 60.0 | False | None | None | False | None | False | 12178.2 | 0 | | 3379884 | 119023 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser.12 Way SP & N ---- etc., complete with all lead | Each | 2830.67 | 2830.67 | 2.0 | False | None | None | False | None | False | 5661.34 | 0 | | 3379885 | 119023 | None | 5.18.1 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 Amps SP ---- etc., complete with all lead | Each | 504.39 | 504.39 | 18.0 | False | None | None | False | None | False | 9079.02 | 0 | | 3379886 | 119023 | None | 5.18.4 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 A DP ---- etc., complete with all lead | Each | 898.18 | 898.18 | 6.0 | False | None | None | False | None | False | 5389.08 | 0 | | 3379887 | 119023 | None | 5.20.1 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole ---- etc., complete with all lead | Each | 5198.27 | 5198.27 | 2.0 | False | None | None | False | None | False | 10396.54 | 0 | | 3379888 | 119023 | None | 32.08 V-6 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- etc., complete with all lead | Km | 218582.4 | 218582.4 | 0.1 | False | None | None | False | None | False | 21858.24 | 0 | | 3379889 | 119023 | None | 21.05 V-6 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff ---- etc., complete with all lead | Km | 25384.84 | 25384.84 | 0.1 | False | None | None | False | None | False | 2538.484 | 0 | | 3379890 | 119023 | None | 48.05( V-6)2021-22 | GI Pipe B - Class as per IS-1239 GI Pipe - 50 mm Dia ---- etc., complete with all lead | Mtr | 393.79 | 393.79 | 5.0 | False | None | None | False | None | False | 1968.95 | 0 | | 3379891 | 119023 | None | I-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead | No | 4266.05 | 4266.05 | 2.0 | False | None | None | False | None | False | 8532.1 | 0 | | 3379892 | 119023 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip ---- etc., complete with all lead | Mtr | 99.66 | 99.66 | 18.0 | False | None | None | False | None | False | 1793.88 | 0 | | 3379893 | 119023 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead | Mtr | 46.19 | 46.19 | 45.0 | False | None | None | False | None | False | 2078.55 | 0 | | 3379894 | 119023 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG ---- etc., complete with all lead | Sq CM | 0.52 | 0.52 | 42000.0 | False | None | None | False | None | False | 21840.0 | 0 | | 3379895 | 119023 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2995.96 | 2995.96 | 3.0 | False | None | None | False | None | False | 8987.88 | 0 | | 3379896 | 119023 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead | Mtr | 370.7 | 370.7 | 3.0 | False | None | None | False | None | False | 1112.1 | 0 | | 3379897 | 119023 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 3379898 | 119023 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead | Each | 3753.16 | 3753.16 | 6.0 | False | None | None | False | None | False | 22518.96 | 0 | | 3379899 | 119023 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead | Each | 11321.45 | 11321.45 | 1.0 | False | None | None | False | None | False | 11321.45 | 0 | | 3379900 | 119023 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead | Each | 625.93 | 625.93 | 3.0 | False | None | None | False | None | False | 1877.79 | 0 | | 3379901 | 119023 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead | Each | 683.05 | 683.05 | 3.0 | False | None | None | False | None | False | 2049.15 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 3 Construction of Block level public health laboratory (BLPHL) at GH Sakleshpura in Hassan District. (Civil Works) (Slice-3) | 4431379.42 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379902 | 119024 | None | V-1 P-8 I-1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 115.46 | 115.46 | 125.4 | False | None | None | False | None | False | 14478.684 | 0 | | 3379903 | 119024 | None | V-1 P-8 I-1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 123.97 | 123.97 | 178.2 | False | None | None | False | None | False | 22091.454 | 0 | | 3379904 | 119024 | None | V-1 P-7 I-1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceed ing 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead | Cum | 323.3 | 323.3 | 160.38 | False | None | None | False | None | False | 51850.854 | 0 | | 3379905 | 119024 | None | V-2 P-5 I-4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ---- etc., complete with all lead | Sqm | 143.42 | 143.42 | 200.06 | False | None | None | False | None | False | 28692.6052 | 0 | | 3379906 | 119024 | None | V-1 P-15 I-2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead | Cum | 7279.03 | 7279.03 | 25.45 | False | None | None | False | None | False | 185251.3135 | 0 | | 3379907 | 119024 | None | V-1 P-15 I-2.2.1 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Footings ---- etc., complete with all lead | Cum | 8252.25 | 8252.25 | 48.44 | False | None | None | False | None | False | 399738.99 | 0 | | 3379908 | 119024 | None | V-1 P-16 I-2.3.2 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers not exceeding 150 mm thickness, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & formwork are included) Plinth Beam ---- etc., complete with all lead | Cum | 7875.79 | 7875.79 | 8.9 | False | None | None | False | None | False | 70094.531 | 0 | | 3379909 | 119024 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Reinforced cement concrete for all S" Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) Columns above plinth ---- etc., complete with all lead | Cum | 14138.87 | 14138.87 | 7.55 | False | None | None | False | None | False | 106748.4685 | 0 | | 3379910 | 119024 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Cills ---- etc., complete with all lead | Cum | 8316.98 | 8316.98 | 0.86 | False | None | None | False | None | False | 7152.6028 | 0 | | 3379911 | 119024 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Chajja ---- etc., complete with all lead | Cum | 12059.84 | 12059.84 | 1.84 | False | None | None | False | None | False | 22190.1056 | 0 | | 3379912 | 119024 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) Plinth Beam, Roof Beam, Lintels ---- etc., complete with all lead | Cum | 13307.17 | 13307.17 | 23.16 | False | None | None | False | None | False | 308194.0572 | 0 | | 3379913 | 119024 | None | V-1 P-17 I-2.5.2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Formwork & centering included) (Centering & formwork are included) RCC Slab ---- etc., complete with all lead | Cum | 12475.47 | 12475.47 | 29.18 | False | None | None | False | None | False | 364034.2146 | 0 | | 3379914 | 119024 | None | V-1 P-84 I-2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) ---- etc., complete with all lead | Tonne | 108726.04 | 108726.04 | 7.91 | False | None | None | False | None | False | 860022.9764 | 0 | | 3379915 | 119024 | None | V-2 P-17 I-6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1592.17 | 1592.17 | 231.25 | False | None | None | False | None | False | 368189.3125 | 0 | | 3379916 | 119024 | None | V-2 P-17 I-6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead | Sqm | 1341.8 | 1341.8 | 53.7 | False | None | None | False | None | False | 72054.66 | 0 | | 3379917 | 119024 | None | V-2 P-87 I-11.35.2.2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Kg | 693.99 | 693.99 | 25.2 | False | None | None | False | None | False | 17488.548 | 0 | | 3379918 | 119024 | None | V-2 P-88 I-11.37.2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications ---- etc., complete with all lead | Sqm | 1423.23 | 1423.23 | 1.2 | False | None | None | False | None | False | 1707.876 | 0 | | 3379919 | 119024 | None | V-2 P-88 I-11.36.2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on both the sids including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead | Sqm | 1194.74 | 1194.74 | 1.2 | False | None | None | False | None | False | 1433.688 | 0 | | 3379920 | 119024 | None | V-2 P-111 I-12.86 | Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6551.01 | 6551.01 | 36.45 | False | None | None | False | None | False | 238784.3145 | 0 | | 3379921 | 119024 | None | V-2 P-110 I-12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead | Sqm | 6950.87 | 6950.87 | 1.62 | False | None | None | False | None | False | 11260.4094 | 0 | | 3379922 | 119024 | None | V-2 P-85 I-11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 575.91 | False | None | None | False | None | False | 128093.9022 | 0 | | 3379923 | 119024 | None | V-2 P-82 I-11.26.3 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes in cluding cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- etc., complete with all lead | Kgs | 222.42 | 222.42 | 82.5 | False | None | None | False | None | False | 18349.65 | 0 | | 3379924 | 119024 | None | V-2 P-100 I-12.13.1 | Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as specifications. ---- etc., complete with all lead | Cum | 120099.75 | 120099.75 | 0.2 | False | None | None | False | None | False | 24019.95 | 0 | | 3379925 | 119024 | None | V-2 P-106 I-12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick Both side commercial. ---- etc., complete with all lead | Sqm | 4037.56 | 4037.56 | 12.2 | False | None | None | False | None | False | 49258.232 | 0 | | 3379926 | 119024 | None | V-2 P-111 I-12.93.2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately).Size 62 x 125mm ---- etc., complete with all lead | Sqm | 928.57 | 928.57 | 20.4 | False | None | None | False | None | False | 18942.828 | 0 | | 3379927 | 119024 | None | V-2 P-112 I-12.94.1 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete with all lead | Sqm | 4235.67 | 4235.67 | 7.5 | False | None | None | False | None | False | 31767.525 | 0 | | 3379928 | 119024 | None | V-2 P-105 I-12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead | Nos | 1234.85 | 1234.85 | 4.0 | False | None | None | False | None | False | 4939.4 | 0 | | 3379929 | 119024 | None | V-2 P-69 I-10.6.3 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead | Nos | 72.92 | 72.92 | 24.0 | False | None | None | False | None | False | 1750.08 | 0 | | 3379930 | 119024 | None | V-2 P-107 I-12.59 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead | Nos | 1353.96 | 1353.96 | 4.0 | False | None | None | False | None | False | 5415.84 | 0 | | 3379931 | 119024 | None | V-2 P-107 I-12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead | Nos | 1278.6 | 1278.6 | 4.0 | False | None | None | False | None | False | 5114.4 | 0 | | 3379932 | 119024 | None | V-2 P-107 I-12.61 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete ---- etc., complete with all lead | Nos | 1203.25 | 1203.25 | 4.0 | False | None | None | False | None | False | 4813.0 | 0 | | 3379933 | 119024 | None | V-2 P-107 I-12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead | Nos | 288.05 | 288.05 | 8.0 | False | None | None | False | None | False | 2304.4 | 0 | | 3379934 | 119024 | None | V-2 P-107 I-12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete ---- etc., complete with all lead | Nos | 158.0 | 158.0 | 8.0 | False | None | None | False | None | False | 1264.0 | 0 | | 3379935 | 119024 | None | V-2 P-107 I-12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- etc., complete with all lead | Nos | 66.85 | 66.85 | 4.0 | False | None | None | False | None | False | 267.4 | 0 | | 3379936 | 119024 | None | V-2 P-108 I-12.75 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) ---- etc., complete with all lead | Nos | 334.24 | 334.24 | 12.0 | False | None | None | False | None | False | 4010.88 | 0 | | 3379937 | 119024 | None | PWD SR 18-19 P-117 I-15.37 | KSRB 15.9 Providing and fixing corner beads 45x45mm size manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along exposed corners of walls, coloumns, lintels including cost of materials, labour for fixing complete . (length of mesh be measured for payment) ---- etc., complete with all lead | Rmtr | 34.03 | 34.03 | 24.3 | False | None | None | False | None | False | 826.929 | 0 | | 3379938 | 119024 | None | V-2 P-60 I-9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 1391.63 | 1391.63 | 155.7 | False | None | None | False | None | False | 216676.791 | 0 | | 3379939 | 119024 | None | V-2 P-60 I-9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- etc., complete with all lead | Sqm | 1080.49 | 1080.49 | 8.3 | False | None | None | False | None | False | 8968.067 | 0 | | 3379940 | 119024 | None | V-2 P-71 I-10.14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete ---- etc., complete with all lead | Sqm | 1344.23 | 1344.23 | 71.4 | False | None | None | False | None | False | 95978.022 | 0 | | 3379941 | 119024 | None | V-2 P-64 I-9.30 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 6475.65 | 6475.65 | 2.7 | False | None | None | False | None | False | 17484.255 | 0 | | 3379942 | 119024 | None | V-2 P-63 I-9.28 | Providing and laying flooring and steps machine cut granite slabs 40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications ---- etc., complete with all lead | Sqm | 5200.7 | 5200.7 | 2.5 | False | None | None | False | None | False | 13001.75 | 0 | | 3379943 | 119024 | None | V-2 P-41 I-8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 144.6 | False | None | None | False | None | False | 49033.86 | 0 | | 3379944 | 119024 | None | V-2 P-41 I-8.8 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding ,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ( Inside) ---- etc., complete with all lead | Sqm | 339.1 | 339.1 | 646.6 | False | None | None | False | None | False | 219262.06 | 0 | | 3379945 | 119024 | None | V-2 P-41 I-8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) finished rough to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( outside) ---- etc., complete with all lead | Sqm | 467.93 | 467.93 | 323.1 | False | None | None | False | None | False | 151188.183 | 0 | | 3379946 | 119024 | None | V-2 P-47 I-8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 64.42 | 64.42 | 29.2 | False | None | None | False | None | False | 1881.064 | 0 | | 3379947 | 119024 | None | V-2 P-48 I-8.40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead | Sqm | 139.77 | 139.77 | 65.0 | False | None | None | False | None | False | 9085.05 | 0 | | 3379948 | 119024 | None | V-2 P-48 I-8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 154.36 | 154.36 | 791.2 | False | None | None | False | None | False | 122129.632 | 0 | | 3379949 | 119024 | None | V-2 P-46 I-8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 211.48 | 211.48 | 323.1 | False | None | None | False | None | False | 68329.188 | 0 | | 3379950 | 119024 | None | V-2 P-47 I-8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 60.77 | 60.77 | 35.8 | False | None | None | False | None | False | 2175.566 | 0 | | 3379951 | 119024 | None | V-2 P-150 I-15.7 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead | Sqm | 747.47 | 747.47 | 4.8 | False | None | None | False | None | False | 3587.856 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 3 Construction of Block level public health laboratory (BLPHL) at GH Sakleshpura in Hassan District. (Water Supply & Sanitary Works) (Slice-3) | 192999.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379952 | 119025 | None | P-122 I.No.13.32.3 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 25 mm Dia ---- etc., complete with all lead | m | 579.75 | 579.75 | 45.0 | False | None | None | False | None | False | 26088.75 | 0 | | 3379953 | 119025 | None | P-122 I.No.13.32.4 of Vol.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per directions of Engineer in charge.Concealed work,including cutting chases and making good the walls etc 32 mm Dia ---- etc., complete with all lead | m | 676.98 | 676.98 | 35.0 | False | None | None | False | None | False | 23694.3 | 0 | | 3379954 | 119025 | None | P-119 I.No.13.12 of Vol.2 | Providing and fixing brass bib cock of approved quality ---- etc., complete with all lead | Nos | 771.78 | 771.78 | 8.0 | False | None | None | False | None | False | 6174.24 | 0 | | 3379955 | 119025 | None | P-117 I.No.13.4.1 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore ---- etc., complete with all lead | Nos | 667.25 | 667.25 | 4.0 | False | None | None | False | None | False | 2669.0 | 0 | | 3379956 | 119025 | None | P-117 I.No.13.4.2 of Vol.2 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore ---- etc., complete with all lead | Nos | 726.81 | 726.81 | 4.0 | False | None | None | False | None | False | 2907.24 | 0 | | 3379957 | 119025 | None | P.No.131 I.No.14.1.1 of Vol.2 | Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Each | 5936.01 | 5936.01 | 2.0 | False | None | None | False | None | False | 11872.02 | 0 | | 3379958 | 119025 | None | P-124 I.No.13.41 of Vol.2 | Providing and fixing trap of self ceansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors:*100mm inlet and 100mm outlet.* Sand cast iron S&S as per IS:1729. ---- etc., complete with all lead | Each | 1629.85 | 1629.85 | 8.0 | False | None | None | False | None | False | 13038.8 | 0 | | 3379959 | 119025 | None | P-125 I.No.13.48 of Vol.2 | Providing and fixingon wall face unplasticised Rigid PVC rain water pipes confirming to IS:13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for the thermal expansion,(i) Single socketed pipes 100mm diameter ---- etc., complete with all lead | Rmtr | 353.68 | 353.68 | 55.0 | False | None | None | False | None | False | 19452.4 | 0 | | 3379960 | 119025 | None | P.No.6 I.No.1.6.1 of Vol.1 | Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m ---- etc., complete with all lead | Cum | 588.25 | 588.25 | 15.0 | False | None | None | False | None | False | 8823.75 | 0 | | 3379961 | 119025 | None | P.No.191 I.No.16.10 of Vol.5 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead | Nos | 5148.43 | 5148.43 | 5.0 | False | None | None | False | None | False | 25742.15 | 0 | | 3379962 | 119025 | None | P-160, I-1.10 of Vol 1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications ---- etc., complete with all lead | Cum | 194.46 | 194.46 | 8.0 | False | None | None | False | None | False | 1555.68 | 0 | | 3379963 | 119025 | None | P-123, I-13.36 of Vol 2 | Cutting holes upto 30X30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks. ---- etc., complete with all lead | Each | 392.57 | 392.57 | 20.0 | False | None | None | False | None | False | 7851.4 | 0 | | 3379964 | 119025 | None | P-123, I-13.37 of Vol 2 | Cutting holes upto 15X15cm in RCC floors and roofs for passing drain pipe etc.,and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including finishing complete so as to make it leak proof. ---- etc., complete with all lead | Each | 380.42 | 380.42 | 10.0 | False | None | None | False | None | False | 3804.2 | 0 | | 3379965 | 119025 | None | P-120 I-13.22.2 of Vol 2 | Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid ---- etc., complete with all lead | Each | 245.51 | 245.51 | 10.0 | False | None | None | False | None | False | 2455.1 | 0 | | 3379966 | 119025 | None | P-20 I-13.23 .2of Vol 2 | Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 20 mm nominal bore, 120 mm long, weighing not less than 198 g ---- etc., complete with all lead | Nos | 300.2 | 300.2 | 1.0 | False | None | None | False | None | False | 300.2 | 0 | | 3379967 | 119025 | None | P-119 I-13.15 of Vol 2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ---- etc., complete with all lead | Nos | 881.17 | 881.17 | 1.0 | False | None | None | False | None | False | 881.17 | 0 | | 3379968 | 119025 | None | P-119 I-13.16 of Vol 2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete with all lead | Nos | 753.55 | 753.55 | 10.0 | False | None | None | False | None | False | 7535.5 | 0 | | 3379969 | 119025 | None | P-123 I-13.34 of Vol 2 | Providing and placing on terrace(at all floor levels), polyethylene water storage tank,IS:120701 marked,with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank ---- etc., complete with all lead | l | 10.94 | 10.94 | 2000.0 | False | None | None | False | None | False | 21880.0 | 0 | | 3379970 | 119025 | None | P-123 I-13.39 of Vol 2 | Providing and fixing square mouth S.W.gully trap class SP-1 complete with C.I.grating,brick masonry camber 150X 100 mm size P type with non modular bcommon burnt clay bricks of designation 3.5 & with water tight.C.I cover with frame of 300X300 mm size (inside)the weight of the cover to be not less than 4.50kg and frame to be not less than 2.70kg as per standard design ---- etc., complete with all lead | Each | 3136.95 | 3136.95 | 2.0 | False | None | None | False | None | False | 6273.9 | 0 |
| | 1719474596000 | 0 | None | None | Buildings | 3 Construction of Block level public health laboratory (BLPHL) at GH Sakleshpura in Hassan District. (Electrical Works) (Slice-3) | 366737.1 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3379971 | 119026 | None | 2.2.1 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch ---- etc., complete with all lead | Point | 326.94 | 326.94 | 22.0 | False | None | None | False | None | False | 7192.68 | 0 | | 3379972 | 119026 | None | 2.2.2 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 460.64 | 460.64 | 16.0 | False | None | None | False | None | False | 7370.24 | 0 | | 3379973 | 119026 | None | 2.2.3 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shallbe terminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch ---- etc., complete with all lead | Point | 674.55 | 674.55 | 15.0 | False | None | None | False | None | False | 10118.25 | 0 | | 3379974 | 119026 | None | 3.4.2 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 3 way ---- etc., complete with all lead | Each | 193.25 | 193.25 | 13.0 | False | None | None | False | None | False | 2512.25 | 0 | | 3379975 | 119026 | None | 3.4.3 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4 - 5 way ---- etc., complete with all lead | Each | 215.13 | 215.13 | 12.0 | False | None | None | False | None | False | 2581.56 | 0 | | 3379976 | 119026 | None | 3.4.4 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 6 way ---- etc., complete with all lead | Each | 267.39 | 267.39 | 6.0 | False | None | None | False | None | False | 1604.34 | 0 | | 3379977 | 119026 | None | 3.4.5 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 8 way ---- etc., complete with all lead | Each | 317.22 | 317.22 | 19.0 | False | None | None | False | None | False | 6027.18 | 0 | | 3379978 | 119026 | None | 3.4.7 | Supplying and flush mounting powder coated/ Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 16 way ---- etc., complete with all lead | Each | 441.19 | 441.19 | 7.0 | False | None | None | False | None | False | 3088.33 | 0 | | 3379979 | 119026 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 3 module ---- etc., complete with all lead | Each | 195.68 | 195.68 | 13.0 | False | None | None | False | None | False | 2543.84 | 0 | | 3379980 | 119026 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 4 module ---- etc., complete with all lead | Each | 212.7 | 212.7 | 12.0 | False | None | None | False | None | False | 2552.4 | 0 | | 3379981 | 119026 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 6 module ---- etc., complete with all lead | Each | 284.4 | 284.4 | 6.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379982 | 119026 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 8 module ---- etc., complete with all lead | Each | 345.17 | 345.17 | 19.0 | False | None | None | False | None | False | 6558.23 | 0 | | 3379983 | 119026 | None | 3.5.7 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box 16 module ---- etc., complete with all lead | Each | 482.51 | 482.51 | 7.0 | False | None | None | False | None | False | 3377.57 | 0 | | 3379984 | 119026 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps one way switch ---- etc., complete with all lead | Each | 123.97 | 123.97 | 84.0 | False | None | None | False | None | False | 10413.48 | 0 | | 3379985 | 119026 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way sockets ---- etc., complete with all lead | Each | 207.83 | 207.83 | 16.0 | False | None | None | False | None | False | 3325.28 | 0 | | 3379986 | 119026 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 stepped fan Regulator's ---- etc., complete with all lead | Each | 433.9 | 433.9 | 12.0 | False | None | None | False | None | False | 5206.8 | 0 | | 3379987 | 119026 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 129316 amps one way switch ---- etc., complete with all lead | Each | 218.77 | 218.77 | 34.0 | False | None | None | False | None | False | 7438.18 | 0 | | 3379988 | 119026 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps universal sockets ---- etc., complete with all lead | Each | 286.83 | 286.83 | 34.0 | False | None | None | False | None | False | 9752.22 | 0 | | 3379989 | 119026 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch ---- etc., complete with all lead | Each | 396.22 | 396.22 | 3.0 | False | None | None | False | None | False | 1188.66 | 0 | | 3379990 | 119026 | None | I-1.13 | Supply and fixing one metal Fan box with round hook ---- etc., complete with all lead | Each | 142.2 | 142.2 | 12.0 | False | None | None | False | None | False | 1706.4 | 0 | | 3379991 | 119026 | None | 1.2.1 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
19/20 mm dia 2 mm thick ---- etc., complete with all lead | Mtr | 80.22 | 80.22 | 130.0 | False | None | None | False | None | False | 10428.6 | 0 | | 3379992 | 119026 | None | 1.3.1 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2mm thick ---- etc., complete with all lead | Mtr | 82.65 | 82.65 | 250.0 | False | None | None | False | None | False | 20662.5 | 0 | | 3379993 | 119026 | None | 1.3.2 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 25 mm dia ---- etc., complete with all lead | Mtr | 96.02 | 96.02 | 220.0 | False | None | None | False | None | False | 21124.4 | 0 | | 3379994 | 119026 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 1.5 Sq.mm ---- etc., complete with all lead | Mtr | 31.6 | 31.6 | 650.0 | False | None | None | False | None | False | 20540.0 | 0 | | 3379995 | 119026 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 2.5 sq.mm ---- etc., complete with all lead | Mtr | 51.05 | 51.05 | 450.0 | False | None | None | False | None | False | 22972.5 | 0 | | 3379996 | 119026 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 4 sq.mm ---- etc., complete with all lead | Mtr | 76.57 | 76.57 | 100.0 | False | None | None | False | None | False | 7657.0 | 0 | | 3379997 | 119026 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments. 6 sq.mm ---- etc., complete with all lead | Mtr | 111.82 | 111.82 | 50.0 | False | None | None | False | None | False | 5591.0 | 0 | | 3379998 | 119026 | None | 2.3.6 | Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments.10 sq.mm ---- etc., complete with all lead | Mtr | 202.97 | 202.97 | 60.0 | False | None | None | False | None | False | 12178.2 | 0 | | 3379999 | 119026 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting. Made out of 14SWG MS enclouser.12 Way SP & N ---- etc., complete with all lead | Each | 2830.67 | 2830.67 | 2.0 | False | None | None | False | None | False | 5661.34 | 0 | | 3380000 | 119026 | None | 5.18.1 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 Amps SP ---- etc., complete with all lead | Each | 504.39 | 504.39 | 18.0 | False | None | None | False | None | False | 9079.02 | 0 | | 3380001 | 119026 | None | 5.18.4 | Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K & complete wiring as required conforming to IEC 60898. 6-32 A DP ---- etc., complete with all lead | Each | 898.18 | 898.18 | 6.0 | False | None | None | False | None | False | 5389.08 | 0 | | 3380002 | 119026 | None | 5.20.1 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole ---- etc., complete with all lead | Each | 5198.27 | 5198.27 | 2.0 | False | None | None | False | None | False | 10396.54 | 0 | | 3380003 | 119026 | None | 32.08 V-6 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- etc., complete with all lead | Km | 218582.4 | 218582.4 | 0.1 | False | None | None | False | None | False | 21858.24 | 0 | | 3380004 | 119026 | None | 21.05 V-6 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff ---- etc., complete with all lead | Km | 25384.84 | 25384.84 | 0.1 | False | None | None | False | None | False | 2538.484 | 0 | | 3380005 | 119026 | None | 48.05( V-6)2021-22 | GI Pipe B - Class as per IS-1239 GI Pipe - 50 mm Dia ---- etc., complete with all lead | Mtr | 393.79 | 393.79 | 5.0 | False | None | None | False | None | False | 1968.95 | 0 | | 3380006 | 119026 | None | I-12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead | No | 4266.05 | 4266.05 | 2.0 | False | None | None | False | None | False | 8532.1 | 0 | | 3380007 | 119026 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip ---- etc., complete with all lead | Mtr | 99.66 | 99.66 | 18.0 | False | None | None | False | None | False | 1793.88 | 0 | | 3380008 | 119026 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead | Mtr | 46.19 | 46.19 | 45.0 | False | None | None | False | None | False | 2078.55 | 0 | | 3380009 | 119026 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG ---- etc., complete with all lead | Sq CM | 0.52 | 0.52 | 42000.0 | False | None | None | False | None | False | 21840.0 | 0 | | 3380010 | 119026 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolici FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | Mtr | 2995.96 | 2995.96 | 3.0 | False | None | None | False | None | False | 8987.88 | 0 | | 3380011 | 119026 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead | Mtr | 370.7 | 370.7 | 3.0 | False | None | None | False | None | False | 1112.1 | 0 | | 3380012 | 119026 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 3380013 | 119026 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead | Each | 3753.16 | 3753.16 | 6.0 | False | None | None | False | None | False | 22518.96 | 0 | | 3380014 | 119026 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead | Each | 11321.45 | 11321.45 | 1.0 | False | None | None | False | None | False | 11321.45 | 0 | | 3380015 | 119026 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead | Each | 625.93 | 625.93 | 3.0 | False | None | None | False | None | False | 1877.79 | 0 | | 3380016 | 119026 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead | Each | 683.05 | 683.05 | 3.0 | False | None | None | False | None | False | 2049.15 | 0 |
| | 1719474597000 | 0 | None | None | Buildings | 4 Construction of Block level public health laboratory (BLPHL) at GH Alur in Hassan District. (Civil Works) (Slice-4) | 4092404.22 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3380017 | 119027 | None | I-19.7.1 P-163 V-2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- etc., complete with all lead | Cum | 585.82 | 585.82 | 8.63 | False | None | None | False | None | False | 5055.6266 | 0 | | 3380018 | 119027 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inclusive) COLUMNS FF ---- etc., complete with all lead | Cum | 14280.25 | 14280.25 | 7.82 | False | None | None | False | None | False | 111671.555 | 0 | | 3380019 | 119027 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inclusive) RCC BEAMS, LINTELS FF ---- etc., complete with all lead | Cum | 13440.24 | 13440.24 | 23.57 | False | None | None | False | None | False | 316786.4568 | 0 | | 3380020 | 119027 | None | I-2.5.2 P-17 V-1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Centering & Formwork are inclusive) RCC SLAB, STAIRCASE FF ---- etc., complete with all lead | Cum | 12600.23 | 12600.23 | 21.36 | False | None | None | False | None | False | 269140.9128 | 0 | | 3380021 | 119027 | None | I-2.1.4 P-15 V-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates FF ---- etc., complete with all lead | Cum | 7631.7 | 7631.7 | 20.35 | False | None | None | False | None | False | 155305.095 | 0 | | 3380022 | 119027 | None | I-15.4 P-135 V-3 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy FF ---- etc., complete with all lead | No. | 250.42 | 250.42 | 30.0 | False | None | None | False | None | False | 7512.6 | 0 | | 3380023 | 119027 | None | I-2.11a P-18 V-1 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) FF ---- etc., complete with all lead | Tonne | 109813.3 | 109813.3 | 6.49 | False | None | None | False | None | False | 712688.317 | 0 | | 3380024 | 119027 | None | I-4.21 P-15 S.R 2018-19 | KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS FF ---- etc., complete with all lead | Rmtr | 40.51 | 40.51 | 40.32 | False | None | None | False | None | False | 1633.3632 | 0 | | 3380025 | 119027 | None | A.R | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. FF ---- etc., complete with all lead | Rmtr | 86.14 | 86.14 | 50.0 | False | None | None | False | None | False | 4307.0 | 0 | | 3380026 | 119027 | None | I-6.32 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1608.1 | 1608.1 | 307.98 | False | None | None | False | None | False | 495262.638 | 0 | | 3380027 | 119027 | None | I-6.34 P-17 V-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1355.22 | 1355.22 | 27.09 | False | None | None | False | None | False | 36712.9098 | 0 | | 3380028 | 119027 | None | I-12.13.1 P-100 V-2 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. FF ---- etc., complete with all lead | Cum | 121300.75 | 121300.75 | 0.82 | False | None | None | False | None | False | 99466.615 | 0 | | 3380029 | 119027 | None | I-12.51 P-105 V-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF ---- etc., complete with all lead | Nos | 1247.19 | 1247.19 | 12.0 | False | None | None | False | None | False | 14966.28 | 0 | | 3380030 | 119027 | None | A.R | Providing and fixing Aluminium fixtures like Aldrops of size 300 x 16 mm, Tower bolts of size 200 x 12 mm, Latches of size 250 x12 mm, 100 mm length oxidized Iron Hinges, Handles of size 150 mm, Door Stopper & Door Bush of approved make and quality including cost and conveyance of all materials and as per the direction of EIC of work with all lead and lift and as directed by the Engineer in charge of works. Single Shutter. (Locking Arrangements) FF ---- etc., complete with all lead | Nos | 2360.0 | 2360.0 | 12.0 | False | None | None | False | None | False | 28320.0 | 0 | | 3380031 | 119027 | None | I-10.6.3 P-69 V-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF ---- etc., complete with all lead | Nos | 73.65 | 73.65 | 72.0 | False | None | None | False | None | False | 5302.8 | 0 | | 3380032 | 119027 | None | I-313 (0115) P-XI S.R 2018-19 | Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. FF ---- etc., complete with all lead | Rmtr | 15.6 | 15.6 | 72.6 | False | None | None | False | None | False | 1132.56 | 0 | | 3380033 | 119027 | None | I-12.57.6 P-106 V-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial FF ---- etc., complete with all lead | Sqm | 4077.93 | 4077.93 | 36.0 | False | None | None | False | None | False | 146805.48 | 0 | | 3380034 | 119027 | None | I-12.90 P-112 V-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc., complete with all lead | Sqm | 8266.35 | 8266.35 | 27.0 | False | None | None | False | None | False | 223191.45 | 0 | | 3380035 | 119027 | None | I-12.85 P-110 V-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc., complete with all lead | Sqm | 7020.38 | 7020.38 | 1.62 | False | None | None | False | None | False | 11373.0156 | 0 | | 3380036 | 119027 | None | I-11.34A P-110 V-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF ---- etc., complete with all lead | Kg | 206.23 | 206.23 | 601.02 | False | None | None | False | None | False | 123948.3546 | 0 | | 3380037 | 119027 | None | I-12.54 P-105 V-2 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. FF ---- etc., complete with all lead | m | 390.36 | 390.36 | 3.15 | False | None | None | False | None | False | 1229.634 | 0 | | 3380038 | 119027 | None | I-12.55.2 P-106 V-2 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. FF ---- etc., complete with all lead | Sqm | 2504.21 | 2504.21 | 3.15 | False | None | None | False | None | False | 7888.2615 | 0 | | 3380039 | 119027 | None | I-12.59 P-107 V-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF ---- etc., complete with all lead | Nos | 1367.5 | 1367.5 | 12.0 | False | None | None | False | None | False | 16410.0 | 0 | | 3380040 | 119027 | None | I-11.35.2.1 P-77 V-2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to re- quired shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials,labour,usage charges of machinery complete as per specifications. FF ---- etc., complete with all lead | Kg | 655.51 | 655.51 | 28.8 | False | None | None | False | None | False | 18878.688 | 0 | | 3380041 | 119027 | None | I-11.36.1 P-77 V-2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1101.12 | 1101.12 | 1.44 | False | None | None | False | None | False | 1585.6128 | 0 | | 3380042 | 119027 | None | I-11.37.1 P-77 V-2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF ---- etc., complete with all lead | Sqm | 1212.82 | 1212.82 | 1.44 | False | None | None | False | None | False | 1746.4608 | 0 | | 3380043 | 119027 | None | I-8.5.2 P-41 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Inside) FF ---- etc., complete with all lead | Sqm | 428.42 | 428.42 | 289.41 | False | None | None | False | None | False | 123989.0322 | 0 | | 3380044 | 119027 | None | I-8.10 P-43 V-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 259.01 | 259.01 | 126.96 | False | None | None | False | None | False | 32883.9096 | 0 | | 3380045 | 119027 | None | I-8.51 P-50 V-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF ---- etc., complete with all lead | Sqm | 122.76 | 122.76 | 512.65 | False | None | None | False | None | False | 62932.914 | 0 | | 3380046 | 119027 | None | I-8.8 P-42 V-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. . (outside) FF ---- etc., complete with all lead | Sqm | 455.42 | 455.42 | 221.68 | False | None | None | False | None | False | 100957.5056 | 0 | | 3380047 | 119027 | None | I-8.3.1 P-42 V-2 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 434.55 | 434.55 | 18.32 | False | None | None | False | None | False | 7960.956 | 0 | | 3380048 | 119027 | None | I-8.16.3 P-43 V-2 | Providing and fixing suitable plaster mesh 100mm wide manufactured
out of hot dipped galvanised iron of nominal thickness 0.35mm with a
zinc coating of 120g/m2
width, along route of walls chipped for services,
junction between RCC and brick walls including cost of materials, labour
for fixing complete as per specifications. ( length of mesh only be measured
for payment Plaster mesh 100mm wide FF ---- etc., complete with all lead | Rmtr | 54.01 | 54.01 | 294.4 | False | None | None | False | None | False | 15900.544 | 0 | | 3380049 | 119027 | None | I-6.12 P-14 V-2 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. FF ---- etc., complete with all lead | Sqm | 1231.24 | 1231.24 | 7.2 | False | None | None | False | None | False | 8864.928 | 0 | | 3380050 | 119027 | None | I-7.18 P-23 V-2 | Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. FF ---- etc., complete with all lead | Cum | 2475.98 | 2475.98 | 1.95 | False | None | None | False | None | False | 4828.161 | 0 | | 3380051 | 119027 | None | I-15.7 P-134 V-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead | Sqm | 754.95 | 754.95 | 37.55 | False | None | None | False | None | False | 28348.3725 | 0 | | 3380052 | 119027 | None | I-10.5.2 P-70 S.R 2018-19 | Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete with all lead | Sqm | 265.15 | 265.15 | 25.0 | False | None | None | False | None | False | 6628.75 | 0 | | 3380053 | 119027 | None | I-8.79 P-54 V-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. FF ---- etc., complete with all lead | Rmtr | 63.83 | 63.83 | 216.67 | False | None | None | False | None | False | 13830.0461 | 0 | | 3380054 | 119027 | None | I-9.21.2 P-62 V-2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).). Size of Tile 600x600 mm FF ---- etc., complete with all lead | Sqm | 1519.71 | 1519.71 | 142.52 | False | None | None | False | None | False | 216589.0692 | 0 | | 3380055 | 119027 | None | I-8.2.1 P-41 V-2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 362.13 | 362.13 | 217.95 | False | None | None | False | None | False | 78926.2335 | 0 | | 3380056 | 119027 | None | I-9.9 P-60 V-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF ---- etc., complete with all lead | Sqm | 1320.85 | 1320.85 | 6.5 | False | None | None | False | None | False | 8585.525 | 0 | | 3380057 | 119027 | None | I-9.39 P-65 V-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF ---- etc., complete with all lead | Sqm | 1778.73 | 1778.73 | 217.95 | False | None | None | False | None | False | 387674.2035 | 0 | | 3380058 | 119027 | None | I-8.39 P-48 V-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 155.9 | 155.9 | 512.65 | False | None | None | False | None | False | 79922.135 | 0 | | 3380059 | 119027 | None | I-8.30 P-46 V-2 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 213.59 | 213.59 | 221.68 | False | None | None | False | None | False | 47348.6312 | 0 | | 3380060 | 119027 | None | I-8.40 P-48 V-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 141.17 | 141.17 | 28.62 | False | None | None | False | None | False | 4040.2854 | 0 | | 3380061 | 119027 | None | I-8.34.1 P-47 V-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc., complete with all lead | Sqm | 65.06 | 65.06 | 79.49 | False | None | None | False | None | False | 5171.6194 | 0 | | 3380062 | 119027 | None | I-8.38 P-48 V-2 | Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 49.1 | 49.1 | 79.49 | False | None | None | False | None | False | 3902.959 | 0 | | 3380063 | 119027 | None | I-10.1.2 P-65 V-2 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 m2 GF ---- etc., complete with all lead | Sqm | 4832.88 | 4832.88 | 7.2 | False | None | None | False | None | False | 34796.736 | 0 |
| | 1719474597000 | 0 | None | None | Buildings | 4 Construction of Block level public health laboratory (BLPHL) at GH Alur in Hassan District. (Water Supply & Sanitary Works) (Slice-4) | 273210.38 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3380064 | 119028 | None | V-2 P-122 I- 13.31.2 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes JOinting of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) 20 mm Dia ---- etc., complete with all lead | Rmtr | 294.13 | 294.13 | 60.0 | False | None | None | False | None | False | 17647.8 | 0 | | 3380065 | 119028 | None | V-2 P-122 I- 13.31.3 | Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes JOinting of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) 25 mm Dia ---- etc., complete with all lead | Rmtr | 386.5 | 386.5 | 40.0 | False | None | None | False | None | False | 15460.0 | 0 | | 3380066 | 119028 | None | V-2 P-117 I- 13.2.1 | Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. ---- etc., complete with all lead | Nos | 347.6 | 347.6 | 4.0 | False | None | None | False | None | False | 1390.4 | 0 | | 3380067 | 119028 | None | V-2 P-117 I- 13.4.1 | Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. 25 mm Dia ---- etc., complete with all lead | Nos | 667.25 | 667.25 | 4.0 | False | None | None | False | None | False | 2669.0 | 0 | | 3380068 | 119028 | None | V-2 P-117 I- 13.4.2 | Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. 32 mm Dia ---- etc., complete with all lead | Nos | 726.81 | 726.81 | 4.0 | False | None | None | False | None | False | 2907.24 | 0 | | 3380069 | 119028 | None | V-2 P-132 I-14.7.1 | KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 ---- etc., complete with all lead | Nos | 3745.86 | 3745.86 | 3.0 | False | None | None | False | None | False | 11237.58 | 0 | | 3380070 | 119028 | None | V-2 P-137 I-14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement
of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead | Nos | 602.84 | 602.84 | 3.0 | False | None | None | False | None | False | 1808.52 | 0 | | 3380071 | 119028 | None | V-2 P-136 I-14.32.2 | Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm ---- etc., complete with all lead | Nos | 1237.28 | 1237.28 | 3.0 | False | None | None | False | None | False | 3711.84 | 0 | | 3380072 | 119028 | None | V-2 P-138 I-14.47 | Providing and fixing floor mounted, white vitreous china single piece,
double traps syphonic water closet of approved brand/make, shape,
size and pattern including integrated white vitreous china cistern of
capacity 10 litres with dual flushing system, including all fittings and
fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc in cluding making connection with the existing P/S trap, complete in all
respect as per directions of Engineer-in-Charge ---- etc., complete with all lead | Nos | 17273.26 | 17273.26 | 2.0 | False | None | None | False | None | False | 34546.52 | 0 | | 3380073 | 119028 | None | P-90 I-12.113.1 S.R 2018-19 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). For 10cms x 7.5cms ---- etc., complete with all lead | Nos | 303.85 | 303.85 | 7.0 | False | None | None | False | None | False | 2126.95 | 0 | | 3380074 | 119028 | None | V-2 P-125 I-13.48 | Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)
Single socketed pipes 100 mm diameter ---- etc., complete with all lead | Rmtr | 353.68 | 353.68 | 80.0 | False | None | None | False | None | False | 28294.4 | 0 | | 3380075 | 119028 | None | V-2 P-128 I-13.64.1 | Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. 75MM DIA ---- etc., complete with all lead | Rmtr | 351.25 | 351.25 | 30.0 | False | None | None | False | None | False | 10537.5 | 0 | | 3380076 | 119028 | None | V-2 P-128 I-13.64.2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direction of
Engineer in Charge. 110MM DIA ---- etc., complete with all lead | Rmtr | 467.93 | 467.93 | 40.0 | False | None | None | False | None | False | 18717.2 | 0 | | 3380077 | 119028 | None | V-2 P-126 I-13.53 | KSRB 12-8.1 : Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M15 with 20mm and downsize granite metal, foundation concrete M5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. ---- etc., complete with all lead | Nos | 6857.29 | 6857.29 | 2.0 | False | None | None | False | None | False | 13714.58 | 0 | | 3380078 | 119028 | None | V-2 P-126 I-13.54 | KSRB 12-8.2 : Constructing brick masonry inspection chamber 500x700mm, and 450mm depth, ( clear inside dimension ) for pipeline with one or two inlets, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 500x700mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with cement concrete M15 with 20mm and downsize granite metal , foundation concrete M5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. ---- etc., complete with all lead | Nos | 7630.28 | 7630.28 | 2.0 | False | None | None | False | None | False | 15260.56 | 0 | | 3380079 | 119028 | None | P-6 V-1 I-1.6.1 | KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5 Add Extra Rate of 50 percent for EWE for Width lesser than 600mm ---- etc., complete with all lead | Cum | 588.25 | 588.25 | 22.0 | False | None | None | False | None | False | 12941.5 | 0 | | 3380080 | 119028 | None | V-1 I-1.10 P-7 | KSRB 2-4 : Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications allow 60% of rate considered under item KSRB 2.3 ---- etc., complete with all lead | Cum | 194.46 | 194.46 | 22.0 | False | None | None | False | None | False | 4278.12 | 0 | | 3380081 | 119028 | None | I-270 I.No.37.35 S.R 2018-19 | Making Wall bores in Brick masonry upto 45 cm thick width for soil / water pipes including redoing with C.M ( 1:4 ) with all lead and lift as directed by Engineer-in-charge. ---- etc., complete with all lead | Nos | 153.14 | 153.14 | 15.0 | False | None | None | False | None | False | 2297.1 | 0 | | 3380082 | 119028 | None | P.No.273 I.No.37.28.2 S.R 2018-19 | Drilling holes of2.50 cms dia (roof/chaJja/stone). including cost of materials, labour, HOM complete as per specifications. in slabs upto 10 cms thick ---- etc., complete with all lead | Nos | 190.82 | 190.82 | 6.0 | False | None | None | False | None | False | 1144.92 | 0 | | 3380083 | 119028 | None | P.No.90 I.No.12.111 S.R 2018-19 | Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100mm dia. ---- etc., complete with all lead | Nos | 182.31 | 182.31 | 7.0 | False | None | None | False | None | False | 1276.17 | 0 | | 3380084 | 119028 | None | V-2 P-117 I-13.5.1 | KSRB13-6.4-1 : Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. ---- etc., complete with all lead | Nos | 359.76 | 359.76 | 2.0 | False | None | None | False | None | False | 719.52 | 0 | | 3380085 | 119028 | None | V-2 P-123 I-13.34 | Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank ---- etc., complete with all lead | Each | 10.94 | 10.94 | 1000.0 | False | None | None | False | None | False | 10940.0 | 0 | | 3380086 | 119028 | None | A.R | Providing & fixing approved quality aquaguard water purifier, etc complete as per specification ---- etc., complete with all lead | Each | 25960.0 | 25960.0 | 1.0 | False | None | None | False | None | False | 25960.0 | 0 | | 3380087 | 119028 | None | A.R | Providing & fixing 1 HP Mono block pump of approved make with all accessories etc.., complete including cost of materials, labour as per specifications.& as per the direction of the Engineer - in - charge ---- etc., complete with all lead | Each | 8260.0 | 8260.0 | 1.0 | False | None | None | False | None | False | 8260.0 | 0 | | 3380088 | 119028 | None | Page no 126 ,item no 14.11.2 SR 2021-22 V-2 | Providing and fixing white vitreous china laboratory sink with C.I.
brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste
and 40mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good the
wall wherever required Size 600x450x200 mm ---- etc., complete with all lead | Each | 6176.66 | 6176.66 | 4.0 | False | None | None | False | None | False | 24706.64 | 0 | | 3380089 | 119028 | None | Page no 128 ,item no 14.28.1.2 SR 2021-22 V-2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete 40 mm dia ---- etc., complete with all lead | Each | 106.96 | 106.96 | 4.0 | False | None | None | False | None | False | 427.84 | 0 | | 3380090 | 119028 | None | Page no 128 ,item no 14.29 SR 2021-22 V-2 | Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead | Each | 57.12 | 57.12 | 4.0 | False | None | None | False | None | False | 228.48 | 0 |
| | 1719474597000 | 0 | None | None | Buildings | 4 Construction of Block level public health laboratory (BLPHL) at GH Alur in Hassan District. (Electrical Works) (Slice-4) | 517789.34 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3380091 | 119029 | None | 2.2.2 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 460.64 | 460.64 | 9.0 | False | None | None | False | None | False | 4145.76 | 0 | | 3380092 | 119029 | None | 2.2.3 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead | Point | 674.55 | 674.55 | 15.0 | False | None | None | False | None | False | 10118.25 | 0 | | 3380093 | 119029 | None | 2.2.4 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete with all lead | Point | 822.83 | 822.83 | 20.0 | False | None | None | False | None | False | 16456.6 | 0 | | 3380094 | 119029 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way ---- etc., complete with all lead | Each | 167.73 | 167.73 | 20.0 | False | None | None | False | None | False | 3354.6 | 0 | | 3380095 | 119029 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead | Each | 193.25 | 193.25 | 5.0 | False | None | None | False | None | False | 966.25 | 0 | | 3380096 | 119029 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead | Each | 215.13 | 215.13 | 5.0 | False | None | None | False | None | False | 1075.65 | 0 | | 3380097 | 119029 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead | Each | 267.39 | 267.39 | 10.0 | False | None | None | False | None | False | 2673.9 | 0 | | 3380098 | 119029 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead | Each | 317.22 | 317.22 | 12.0 | False | None | None | False | None | False | 3806.64 | 0 | | 3380099 | 119029 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete with all lead | Each | 166.51 | 166.51 | 20.0 | False | None | None | False | None | False | 3330.2 | 0 | | 3380100 | 119029 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete with all lead | Each | 212.7 | 212.7 | 5.0 | False | None | None | False | None | False | 1063.5 | 0 | | 3380101 | 119029 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete with all lead | Each | 284.4 | 284.4 | 5.0 | False | None | None | False | None | False | 1422.0 | 0 | | 3380102 | 119029 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead | Each | 345.17 | 345.17 | 10.0 | False | None | None | False | None | False | 3451.7 | 0 | | 3380103 | 119029 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete with all lead | Each | 418.1 | 418.1 | 12.0 | False | None | None | False | None | False | 5017.2 | 0 | | 3380104 | 119029 | None | 3.6.1 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) 6Amps one way Switch ---- etc., complete with all lead | Each | 123.97 | 123.97 | 84.0 | False | None | None | False | None | False | 10413.48 | 0 | | 3380105 | 119029 | None | 3.6.3 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) 6Amps 3way socket ---- etc., complete with all lead | Each | 207.83 | 207.83 | 40.0 | False | None | None | False | None | False | 8313.2 | 0 | | 3380106 | 119029 | None | 3.6.4 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Stepped Fan Regulator. ---- etc., complete with all lead | Each | 433.9 | 433.9 | 9.0 | False | None | None | False | None | False | 3905.1 | 0 | | 3380107 | 119029 | None | 3.6.7 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) 16Amps one way switch ---- etc., complete with all lead | Each | 215.13 | 215.13 | 4.0 | False | None | None | False | None | False | 860.52 | 0 | | 3380108 | 119029 | None | 3.6.10 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) 32Amps DP switch ---- etc., complete with all lead | Each | 286.83 | 286.83 | 6.0 | False | None | None | False | None | False | 1720.98 | 0 | | 3380109 | 119029 | None | 3.6.11 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) 6/16Amps universal socket ---- etc., complete with all lead | Each | 189.6 | 189.6 | 10.0 | False | None | None | False | None | False | 1896.0 | 0 | | 3380110 | 119029 | None | 3.6.12 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) RJ45/ I.O. outlet ---- etc., complete with all lead | Each | 409.59 | 409.59 | 4.0 | False | None | None | False | None | False | 1638.36 | 0 | | 3380111 | 119029 | None | 3.6.11 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7) Telephone socket ---- etc., complete with all lead | Each | 189.6 | 189.6 | 4.0 | False | None | None | False | None | False | 758.4 | 0 | | 3380112 | 119029 | None | I-1.12 | Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead | No | 194.46 | 194.46 | 9.0 | False | None | None | False | None | False | 1750.14 | 0 | | 3380113 | 119029 | None | 1.1.1 | Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1) 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 83.86 | 83.86 | 400.0 | False | None | None | False | None | False | 33544.0 | 0 | | 3380114 | 119029 | None | 1.1.2 | Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1) 25mm dia 2mm thick ---- etc., complete with all lead | m | 98.45 | 98.45 | 250.0 | False | None | None | False | None | False | 24612.5 | 0 | | 3380115 | 119029 | None | 1.1.3 | Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(2/1.1) 32mm dia 2.5mm thick ---- etc., complete with all lead | m | 128.83 | 128.83 | 100.0 | False | None | None | False | None | False | 12883.0 | 0 | | 3380116 | 119029 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.(2/1.3) 19/20mm dia 2mm thick ---- etc., complete with all lead | m | 82.65 | 82.65 | 180.0 | False | None | None | False | None | False | 14877.0 | 0 | | 3380117 | 119029 | None | 1.3.2 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.(2/1.3) 25mm dia 2mm thick ---- etc., complete with all lead | m | 96.02 | 96.02 | 220.0 | False | None | None | False | None | False | 21124.4 | 0 | | 3380118 | 119029 | None | 1.3.3 | Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.(2/1.3) 32mm dia 2.5mm thick ---- etc., complete with all lead | m | 120.32 | 120.32 | 40.0 | False | None | None | False | None | False | 4812.8 | 0 | | 3380119 | 119029 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead | m | 31.6 | 31.6 | 200.0 | False | None | None | False | None | False | 6320.0 | 0 | | 3380120 | 119029 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead | m | 51.05 | 51.05 | 500.0 | False | None | None | False | None | False | 25525.0 | 0 | | 3380121 | 119029 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead | m | 76.57 | 76.57 | 300.0 | False | None | None | False | None | False | 22971.0 | 0 | | 3380122 | 119029 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete with all lead | m | 111.82 | 111.82 | 200.0 | False | None | None | False | None | False | 22364.0 | 0 | | 3380123 | 119029 | None | I-8.1 | Supplying and drawing UTP-CAT 6E LAN cable. ---- etc., complete with all lead | m | 46.19 | 46.19 | 100.0 | False | None | None | False | None | False | 4619.0 | 0 | | 3380124 | 119029 | None | 8.2.2 | Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- etc., complete with all lead | m | 25.52 | 25.52 | 100.0 | False | None | None | False | None | False | 2552.0 | 0 | | 3380125 | 119029 | None | 11.3.2 | Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete with all lead | Each | 838.63 | 838.63 | 21.0 | False | None | None | False | None | False | 17611.23 | 0 | | 3380126 | 119029 | None | 11.5.3 | Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W ---- etc., complete with all lead | Each | 1609.19 | 1609.19 | 6.0 | False | None | None | False | None | False | 9655.14 | 0 | | 3380127 | 119029 | None | 11.11.3 | Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should lesser than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead | Each | 181.09 | 181.09 | 4.0 | False | None | None | False | None | False | 724.36 | 0 | | 3380128 | 119029 | None | I-6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead | Each | 1813.38 | 1813.38 | 4.0 | False | None | None | False | None | False | 7253.52 | 0 | | 3380129 | 119029 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod
blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete with all lead | Each | 3626.75 | 3626.75 | 9.0 | False | None | None | False | None | False | 32640.75 | 0 | | 3380130 | 119029 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead | Each | 148.28 | 148.28 | 27.0 | False | None | None | False | None | False | 4003.56 | 0 | | 3380131 | 119029 | None | I-13.10 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated
twin twisted copper wire and wiring. ---- etc., complete with all lead | Each | 207.83 | 207.83 | 9.0 | False | None | None | False | None | False | 1870.47 | 0 | | 3380132 | 119029 | None | I-13.11 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead | Each | 382.85 | 382.85 | 4.0 | False | None | None | False | None | False | 1531.4 | 0 | | 3380133 | 119029 | None | 5.19.11 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure Double Door 4 Way TPN DB ---- etc., complete with all lead | Each | 4907.79 | 4907.79 | 2.0 | False | None | None | False | None | False | 9815.58 | 0 | | 3380134 | 119029 | None | 5.18.1 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead | Each | 504.39 | 504.39 | 24.0 | False | None | None | False | None | False | 12105.36 | 0 | | 3380135 | 119029 | None | 5.18.8 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead | Each | 3699.68 | 3699.68 | 2.0 | False | None | None | False | None | False | 7399.36 | 0 | | 3380136 | 119029 | None | 5.20.4 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole ---- etc., complete with all lead | Each | 5541.01 | 5541.01 | 2.0 | False | None | None | False | None | False | 11082.02 | 0 | | 3380137 | 119029 | None | 5.42.2 | Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead | Sq CM | 0.52 | 0.52 | 60000.0 | False | None | None | False | None | False | 31200.0 | 0 | | 3380138 | 119029 | None | 5.40.1 | Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead | m | 2995.96 | 2995.96 | 3.0 | False | None | None | False | None | False | 8987.88 | 0 | | 3380139 | 119029 | None | 5.41.1 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead | m | 370.7 | 370.7 | 6.0 | False | None | None | False | None | False | 2224.2 | 0 | | 3380140 | 119029 | None | 5.41.4 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead | m | 918.84 | 918.84 | 6.0 | False | None | None | False | None | False | 5513.04 | 0 | | 3380141 | 119029 | None | 5.15.9 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the
existing wood/panel board using necessary screws, bolts, nuts,
necessary phase separators, handle and wiring complete. Protection of
Overload and Short circuitwith adjustable thermal magnetic release,
Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .
(Icu=100% lcs). In 4P MCCB, all Poles should have protection for
Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for
segregating Priority and Non-Priority loads must be available in the
MCCB. MCCB shall be provided with double insulation (insulation
between front cover and internal power circuits to avoid any accidental
contact with live current carrying path with the front cover open).
Multi-pole breakers shall be designed to break all the poles
simultaneously and they shall have a single mechanism FOUR POLE 100Amps 25kA ---- etc., complete with all lead | Each | 10315.1 | 10315.1 | 1.0 | False | None | None | False | None | False | 10315.1 | 0 | | 3380142 | 119029 | None | 5.18.8 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead | Each | 3699.68 | 3699.68 | 4.0 | False | None | None | False | None | False | 14798.72 | 0 | | 3380143 | 119029 | None | I-5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead | Each | 625.93 | 625.93 | 3.0 | False | None | None | False | None | False | 1877.79 | 0 | | 3380144 | 119029 | None | I-5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead | Each | 683.05 | 683.05 | 3.0 | False | None | None | False | None | False | 2049.15 | 0 | | 3380145 | 119029 | None | I-5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead | Each | 11321.45 | 11321.45 | 1.0 | False | None | None | False | None | False | 11321.45 | 0 | | 3380146 | 119029 | None | I-32.09 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 core 35 sqmm ---- etc., complete with all lead | Km | 187246.95 | 187246.95 | 0.05 | False | None | None | False | None | False | 9362.3475 | 0 | | 3380147 | 119029 | None | I-21.06 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using
Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm ---- etc., complete with all lead | Km | 37846.34 | 37846.34 | 0.05 | False | None | None | False | None | False | 1892.317 | 0 | | 3380148 | 119029 | None | Ele 6.11.4 S.R 2019-2020 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 45mm dia ---- etc., complete with all lead | Each | 235.79 | 235.79 | 4.0 | False | None | None | False | None | False | 943.16 | 0 | | 3380149 | 119029 | None | Ele 6.9.2 S.R 2019-2020 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 50mm ---- etc., complete with all lead | m | 461.85 | 461.85 | 10.0 | False | None | None | False | None | False | 4618.5 | 0 | | 3380150 | 119029 | None | Ele 6.17.8 S.R 2019-2020 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead | Each | 38.89 | 38.89 | 8.0 | False | None | None | False | None | False | 311.12 | 0 | | 3380151 | 119029 | None | I-12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead | No | 5172.74 | 5172.74 | 2.0 | False | None | None | False | None | False | 10345.48 | 0 | | 3380152 | 119029 | None | 12.58.2 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead | m | 99.66 | 99.66 | 20.0 | False | None | None | False | None | False | 1993.2 | 0 |
|
|
|---|