| 3298424 | 114951 | None | code01 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar | Cum | 1090.74 | 1090.74 | 1.39 | False | None | None | False | None | False | 1516.1286 | 0 |
| 3298425 | 114951 | None | code02 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 8447.14 | 8447.14 | 13.32 | False | None | None | False | None | False | 112515.9048 | 0 |
| 3298426 | 114951 | None | code03 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7027.8 | 7027.8 | 14.45 | False | None | None | False | None | False | 101551.71 | 0 |
| 3298427 | 114951 | None | code04 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic ith elongation greater than 400% and tensile strength greater than MPa as per ASTM D412. The waterproofing membrane to be pplied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the aterproofing membrane. The finished cost to include surface reparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 ears warranty on product & work from certified manufacturers as per the direction of the Engineer In charge | Sqm | 866.02 | 866.02 | 62.79 | False | None | None | False | None | False | 54377.3958 | 0 |
| 3298428 | 114951 | None | code05 | Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 94824.42 | 94824.42 | 1.32 | False | None | None | False | None | False | 125168.2344 | 0 |
| 3298429 | 114951 | None | code06 | Form work, centering and scaffolding for Columns & Piers | Cum | 4919.46 | 4919.46 | 1.58 | False | None | None | False | None | False | 7772.7468 | 0 |
| 3298430 | 114951 | None | code07 | Form work, centering and scaffolding for Chejja, Canopy and other Architectural projections of minor sections. | Cum | 3162.51 | 3162.51 | 0.14 | False | None | None | False | None | False | 442.7514 | 0 |
| 3298431 | 114951 | None | code08 | Form work, centering and scaffolding for Beams & Lintels of Building | Cum | 4216.68 | 4216.68 | 3.31 | False | None | None | False | None | False | 13957.2108 | 0 |
| 3298432 | 114951 | None | code09 | Form work, centering and scaffolding for Roof (Straight & Arched) of Building | Cum | 3513.9 | 3513.9 | 9.42 | False | None | None | False | None | False | 33100.938 | 0 |
| 3298433 | 114951 | None | code10 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 312.7 | 312.7 | 73.35 | False | None | None | False | None | False | 22936.545 | 0 |
| 3298434 | 114951 | None | code11 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 408.1 | 408.1 | 115.48 | False | None | None | False | None | False | 47127.388 | 0 |
| 3298435 | 114951 | None | code12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 106.0 | 106.0 | 58.31 | False | None | None | False | None | False | 6180.86 | 0 |
| 3298436 | 114951 | None | code13 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 4746.68 | 4746.68 | 2.52 | False | None | None | False | None | False | 11961.6336 | 0 |
| 3298437 | 114951 | None | code14 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 156.88 | 156.88 | 172.8 | False | None | None | False | None | False | 27108.864 | 0 |
| 3298438 | 114951 | None | code15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 178.08 | 178.08 | 253.26 | False | None | None | False | None | False | 45100.5408 | 0 |
| 3298439 | 114951 | None | code16 | Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1637.7 | 1637.7 | 62.76 | False | None | None | False | None | False | 102782.052 | 0 |
| 3298440 | 114951 | None | code17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.22 | 145.22 | 131.66 | False | None | None | False | None | False | 19119.6652 | 0 |
| 3298441 | 114951 | None | code18 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 188.68 | 188.68 | 115.48 | False | None | None | False | None | False | 21788.7664 | 0 |
| 3298442 | 114951 | None | code19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 121.9 | 121.9 | 24.51 | False | None | None | False | None | False | 2987.769 | 0 |
| 3298443 | 114951 | None | code20 | Cement Board | Sqm | 311.64 | 311.64 | 9.0 | False | None | None | False | None | False | 2804.76 | 0 |
| 3298444 | 114951 | None | code21 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 | Nos | 9540.0 | 9540.0 | 1.0 | False | None | None | False | None | False | 9540.0 | 0 |
| 3298445 | 114951 | None | code22 | Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary | Mtr | 78.78 | 78.78 | 40.0 | False | None | None | False | None | False | 3151.2 | 0 |
| 3298446 | 114951 | None | code23 | Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. | Mtr | 79.79 | 79.79 | 50.0 | False | None | None | False | None | False | 3989.5 | 0 |
| 3298447 | 114951 | None | code24 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc..- 180x90x65mm | Nos | 162.61 | 162.61 | 1.0 | False | None | None | False | None | False | 162.61 | 0 |
| 3298448 | 114951 | None | code25 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.(300x300x76mm) | Mtr | 121.2 | 121.2 | 1.0 | False | None | None | False | None | False | 121.2 | 0 |
| 3298449 | 114951 | None | code26 | Supplying of .....feet -PVC Batten with integrated LED tube ....
W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manmanufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W | Nos | 696.9 | 696.9 | 4.0 | False | None | None | False | None | False | 2787.6 | 0 |
| 3298450 | 114951 | None | code27 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system - 48" Sweep (1200mm) Regular model | Nos | 3013.84 | 3013.84 | 2.0 | False | None | None | False | None | False | 6027.68 | 0 |
| 3298451 | 114951 | None | code28 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch | Point | 287.85 | 287.85 | 2.0 | False | None | None | False | None | False | 575.7 | 0 |
| 3298452 | 114951 | None | code29 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch | Point | 397.94 | 397.94 | 2.0 | False | None | None | False | None | False | 795.88 | 0 |
| 3298453 | 114951 | None | code30 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch | Point | 575.7 | 575.7 | 2.0 | False | None | None | False | None | False | 1151.4 | 0 |
| 3298454 | 114951 | None | code31 | Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way | Nos | 148.87 | 148.87 | 3.0 | False | None | None | False | None | False | 446.61 | 0 |
| 3298455 | 114951 | None | code32 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. | Nos | 746.39 | 746.39 | 1.0 | False | None | None | False | None | False | 746.39 | 0 |
| 3298456 | 114951 | None | code33 | Supply, delivery and assembling Bench & desk unit of size 1800 mm as shown in the drawing with the following specifications: The overall dimensions should be of size 1800 mm X 895mm X 750 mm. The plywood panel for desk (1800 x 378 x 18 mm), seat (1800 x 335 x 25 mm) and back (1800 x 265 x 18 mm) should be made of both side 0.8 mm thick Pre- Laminated sheet confirming to IS 10701: 2012, The edges should be rounded duly sealed with 2mm thick 18 mm & 25 mm wide hot pressed PVC (Poly Vinyl Chloride) beading. And fixed to the understructure supporting the ply wood sheet with power driven 16 mm screws to the square tubes. The understructure should be made of 25.0 mm square tube 1.6 mm thick powder coated ERW (Electrical Resistance welded) frames at base which should be welded to the desk and seat supports that are made of 1.0 mm thick powder coated 27.5 mm x 25.4 mm C channel frame sections. (3) Vertical frames at base and back of seat made of 25.0 mm sq tube x 1.6 mm thick powder coated ERW tubes should be provided with 25 mm sq tubes stiffeners between them fixed with threaded screws. These frames, legs and open ends should be closed with PVC caps. The storage shelf closed on three sides should be made from 0.8 mm thick powder coated MS Sheet affixed with self threaded screws below the desktop and the frame supporting to the desk top. Hooks made from 6.0 mm dia MS rods should be provided on either side of the vertical frame of the desk, for hanging bags/ bottles. All wooden panels shall be half rounded at corners. Steel used should confirm to IS 513. The legs shall be provided with PVC bushes steel used should undergo pre treatment process as per IS 3618- 1996. All structural steel fabricate components requiring welding are spot welded and finished with epoxy polyester powder coating DFT(Dry Film Thickness) of 45 microns as per IS101. The total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, including all statutory taxes & cess etc., complete for finished item of work. The item shall carry a warranty period of 1 year (12 months) from the date of supply. | Each | 6745.0 | 6745.0 | 15.0 | False | None | None | False | None | False | 101175.0 | 0 |
| 3298457 | 114951 | None | code34 | Smart Class Room Integrated Digital Teaching Device/ Integrated Computer Projector in a single box and portable unit with inbuilt Device Management Solution. External Keyboard and mouse. (As Per GEM Rate) GEM ID 5116877-71970696054 | Nos | 169915.0 | 169915.0 | 1.0 | False | None | None | False | None | False | 169915.0 | 0 |
| 3298458 | 114951 | None | code35 | Multimedia content in English. (As Per GEM Rate) | Nos | 25400.0 | 25400.0 | 1.0 | False | None | None | False | None | False | 25400.0 | 0 |
| 3298459 | 114951 | None | code36 | Multimedia content in Urdu/Kannada. (As Per GEM Rate) | Nos | 25400.0 | 25400.0 | 1.0 | False | None | None | False | None | False | 25400.0 | 0 |
| 3298460 | 114951 | None | code37 | Learning Units and videos for Science and Virtual Experiments. (As Per GEM Rate) | Nos | 12400.0 | 12400.0 | 1.0 | False | None | None | False | None | False | 12400.0 | 0 |
| 3298461 | 114951 | None | code38 | Supplying, Erecting, testing, and commissioning of ON-LINE UPS system suitable for operation on 230V, 50hz, A/C supply, with osolation transformer all accessories complete and Execluding batteries and wiring complete. Vol.6 of Common SR 2023-24 (I.No 9.3.3. pg.no 38) | Nos | 23648.0 | 23648.0 | 1.0 | False | None | None | False | None | False | 23648.0 | 0 |
| 3298462 | 114951 | None | code39 | Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S sealed maintenance free batteries. Vol.6 of Common SR 2023-24 (I.No 9.3.3. pg.no 38)7 AH capacity | Nos | 3261.0 | 3261.0 | 1.0 | False | None | None | False | None | False | 3261.0 | 0 |
| 3298463 | 114951 | None | code40 | 18 AH capacity | Nos | 5210.0 | 5210.0 | 1.0 | False | None | None | False | None | False | 5210.0 | 0 |