createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719390550293 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3590.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-07-2024 16:00:00 tenderQueryClose 11-07-2024 16:00:00 technicalBidOpen 15-07-2024 11:00:00 publishedDate 28-06-2024 13:11:29 publishedByPost RDPR_EE_DIV_BID publishedByUser KPE12975 - RAJKUMAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 10-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9844686454 tenderSupplierList None
tenderSchedule	createdTs 1719390550335 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT6021 title Construction of Proposed MRF Centre (Material Recovery Facility) at Hanamanthwadi (R) village in Basvakalyan Taluka. description Construction of Proposed MRF Centre (Material Recovery Facility) at Hanamanthwadi (R) village in Basvakalyan Taluka. category WORKS categoryText Works ecv 14346703.07 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 793 locationName RDPR Division Office Bidar provisionalAmount 24800000.0 groupOverheadTotal 2188480.13 fileNumber AEE/BKN/MRF/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719390550000 0 None None Buildings MAIN BUILDING WITH KITCHEN 11255412.39 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3361238 118242 None Vol-IP.No.8 I.No.1.15.1 Rs.363.00 Cum Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of achinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 381.15 381.15 191.82 False None None False None False 73112.193 0 3361239 118242 None Vol-I P.No. 15 I.No.2.1.3 Rs.5989.00 Cum Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 6288.45 6288.45 153.28 False None None False None False 963893.616 0 3361240 118242 None Vol-I P.N.15 I.N.2.2.5 Rs6499 Cum Add 8 Per Cent Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. a) For Footing Cum 7369.87 7369.87 32.88 False None None False None False 242321.3256 0 3361241 118242 None Vol-I P.N.15 I.N.2.2.5 Rs.6499 Cum Add 10 Per Cent b) Column Cum 7506.35 7506.35 8.09 False None None False None False 60726.3715 0 3361242 118242 None Vol-I P.N.15 I.N.2.2.5 Rs.6499 Cum Add 50 Per Cent c) For Plinth Beam Cum 10235.93 10235.93 12.07 False None None False None False 123547.6751 0 3361243 118242 None Vol-I P.N.15 I.N.2.2.5 Rs.6499 Cum Add 60 Per Cent d) Lintels Cum 10918.32 10918.32 0.95 False None None False None False 10372.404 0 3361244 118242 None Vol-II P.No.18I.No.2.11 a Rs.89457.00 Ton Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Kgs 93.93 93.93 5621.4 False None None False None False 528018.102 0 3361245 118242 None Vol-2 IP.No.9 I.No.5.4 Rs.6389.00 Cum Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 6708.45 6708.45 90.52 False None None False None False 607248.894 0 3361246 118242 None Vol-I P.No.7 I.No.1.9 Rs.266.00 Cum Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 279.3 279.3 462.21 False None None False None False 129095.253 0 3361247 118242 None Vol-2 P.No.17 I.No.6.32 Rs.1310.00 Cum Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 1375.5 1375.5 67.55 False None None False None False 92915.025 0 3361248 118242 None Vol-2 P.No.41 I.No.8.3.1 Rs.354.00 Sqm Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 371.7 371.7 692.09 False None None False None False 257249.853 0 3361249 118242 None Vol-2 P.No.82 I.No.11.16.2 Rs.147.00 Kg Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 154.35 154.35 41120.3 False None None False None False 6346918.305 0 3361250 118242 None Vol-2 P.No.26 I.No.7.38 Rs.568.00 Sqm Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 596.4 596.4 2025.5 False None None False None False 1208008.2 0 3361251 118242 None Vol-2 P.No.44 I.No.8.21 Rs.26.00 Sqm Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 27.3 27.3 692.09 False None None False None False 18894.057 0 3361252 118242 None Vol-2 P.No.46 I.No.8.33.1 Rs.158.00 Sqm Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications.. (The gloss should be 50% @ 60 degree angle with 10 years life) including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 165.9 165.9 692.09 False None None False None False 114817.731 0 3361253 118242 None Vol-2 P.No.87 I.No.11.35.1.2 Rs.489.00 Kg Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Kgs 513.45 513.45 120.0 False None None False None False 61614.0 0 3361254 118242 None Vol-2 P.No.89 I.No.11.36.2 Rs.983.00 Sqm Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 1032.15 1032.15 10.64 False None None False None False 10982.076 0 3361255 118242 None Vol-2 P.No.89 I.No.11.37.1 Rs.988.00 Sqm Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 1037.4 1037.4 7.6 False None None False None False 7884.24 0 3361256 118242 None Vol-3 P.No.51 I.No.6.8.2 Rs.1161.00 Sqm Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete. including with all leads & Lift charges complete as directed by Engineer-incharge of the work.. (WMM/WBM Base to be paid separately as per relevant technical specification) Sqm 1219.05 1219.05 102.71 False None None False None False 125208.6255 0 3361257 118242 None Vol-2 P.No.78 I.No.11.6.1 Rs.2633.00 Sqm Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 2764.65 2764.65 50.0 False None None False None False 138232.5 0 3361258 118242 None Vol-2 P.No.79 I.No.11.8.4 Rs.24686.00 Each Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 25920.3 25920.3 2.0 False None None False None False 51840.6 0 3361259 118242 None Vol-2 P.No.77 I.No.11.5.1 Rs.4478.00 Sqm Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 4701.9 4701.9 10.08 False None None False None False 47395.152 0 3361260 118242 None Vol-2 P.No.87 I.No.11.35.1.2 Rs.489.00 Kg Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Kgs 513.45 513.45 60.0 False None None False None False 30807.0 0 3361261 118242 None Vol-2 P.No.85 I.No.11.30.1 Rs.912.00 Sqm Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 957.6 957.6 4.5 False None None False None False 4309.2 0 1719390550000 0 None None Buildings TOILET BLOCK 902810.55 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3361262 118243 None Vol-IP.No.8 I.No.1.15.1 Rs.363.00 Cum Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of achinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 381.15 381.15 30.09 False None None False None False 11468.8035 0 3361263 118243 None Vol-I P.No. 15 I.No.2.1.3 Rs.5989.00 Cum Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formworkshall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 6288.45 6288.45 8.34 False None None False None False 52445.673 0 3361264 118243 None Vol-I P.N.15 I.N.2.2.5 Rs.6499 Cum Add 50 Per Cent Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. a) For Plinth Concrete. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 10235.93 10235.93 1.76 False None None False None False 18015.2368 0 3361265 118243 None Vol-I P.N.15 I.N.2.2.5 Rs.6499 Cum Add 60 Per Cent b) Lintel Cum 10918.32 10918.32 1.2 False None None False None False 13101.984 0 3361266 118243 None Vol-II P.No.18I.No.2.11 a Rs.89457.00 Ton Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Kgs 93.93 93.93 236.8 False None None False None False 22242.624 0 3361267 118243 None Vol-2 IP.No.9 I.No.5.4 Rs.6389.00 Cum Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 6708.45 6708.45 19.39 False None None False None False 130076.8455 0 3361268 118243 None Vol-I P.No.7 I.No.1.9 Rs.266.00 Cum Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 279.3 279.3 27.05 False None None False None False 7555.065 0 3361269 118243 None Vol-2 P.No.17 I.No.6.32 Rs.1310.00 Cum Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 1375.5 1375.5 15.12 False None None False None False 20797.56 0 3361270 118243 None Vol-2 P.No.17 I.No.6.34 Rs.1104.00 Cum Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Cum 1159.2 1159.2 22.11 False None None False None False 25629.912 0 3361271 118243 None Vol-2 P.No.41 I.No.8.3.1 Rs.354.00 Sqm Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 371.7 371.7 237.29 False None None False None False 88200.693 0 3361272 118243 None Vol-2 P.No.44 I.No.8.21 Rs.26.00 Sqm Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 27.3 27.3 237.29 False None None False None False 6478.017 0 3361273 118243 None Vol-2 P.No.46 I.No.8.33.1 Rs.158.00 Sqm Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications. (The gloss should be 50% @ 60 degree angle with 10 years life) including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 165.9 165.9 237.29 False None None False None False 39366.411 0 3361274 118243 None Vol-2 P.No.60 I.No.9.12.2 Rs.1145.00 Sqm Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 1202.25 1202.25 106.83 False None None False None False 128436.3675 0 3361275 118243 None Vol-2 P.No.131 I.No.14.3.1 Rs.5977.00 Each Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 6275.85 6275.85 4.0 False None None False None False 25103.4 0 3361276 118243 None Vol-2 P.No.132 I.No.14.7.1 Rs.3082.00 Each Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 3236.1 3236.1 3.0 False None None False None False 9708.3 0 3361277 118243 None Vol-2 P.No.133 I.No.14.9.1 Rs.2981.00 Each Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 3130.05 3130.05 1.0 False None None False None False 3130.05 0 3361278 118243 None Vol-2 P.No.130 I.No.14.1.1 Rs.4884.00 Each Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 5128.2 5128.2 2.0 False None None False None False 10256.4 0 3361279 118243 None Vol-2 P.No.69 I.No.10.8 Rs.2789.00 Sqm Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 2928.45 2928.45 2.4 False None None False None False 7028.28 0 3361280 118243 None Vol-2 P.No.64 I.No.9.36 Rs.1650.00 Sqm Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 1732.5 1732.5 2.78 False None None False None False 4816.35 0 3361281 118243 None Vol-2 P.No.128 I.No.14.31 Rs.1220.00 Each Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 1281.0 1281.0 3.0 False None None False None False 3843.0 0 3361282 118243 None Vol-2 P.No.137 I.No.14.40.1 Rs.478.00 Each Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Each 501.9 501.9 6.0 False None None False None False 3011.4 0 3361283 118243 None Vol-2 P.No.21 I.No.7.1.1 Rs.879.00 Sqm Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m². including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 922.95 922.95 69.2 False None None False None False 63868.14 0 3361284 118243 None Vol-2 P.No.108 I.No.12.83.1 Rs.198.00 Mtr Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer- in-charge 48x40 mm PVC Extruded section. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Mtr 207.9 207.9 48.93 False None None False None False 10172.547 0 3361285 118243 None Vol-2 P.No.111 I.No.12.92 Rs.6245.00 Sqm Providing & fixing of Openable door made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made). including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 6557.25 6557.25 19.74 False None None False None False 129440.115 0 3361286 118243 None Vol-2 P.No.112 I.No.12.92 Rs.6245.00 Sqm Providing & fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Sqm 6557.25 6557.25 4.73 False None None False None False 31015.7925 0 3361287 118243 None Vol-2 P.No.77 I.No.11.1 Rs.106.00 Kg Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications. including with all leads & Lift charges complete as directed by Engineer-incharge of the work. Kgs 111.3 111.3 337.84 False None None False None False 37601.592 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719390551000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719390551000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719390551000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1719390551000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719390551000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719390575000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund. None 1719390580000 0 None None ELIGIBILITY The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders. None 1719390584000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1719390588000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive). None 1719390596000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever. None 1719390606000 0 None None ELIGIBILITY The tenderer shall maintain the Road/Building during the defect liability period. None 1719390617000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing KPPP portal. None 1719390630000 1 None None ELIGIBILITY Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25 and Value at 2024-25 price level, of existing commitments and on-going works to be executed during the next 12 months (Financial commitment of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25) in the Technical Qualification Criteria mentioned in the next section. None 1719390685000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation. None 1719390697000 0 None None ELIGIBILITY The star rates in respect of specified materials (Cement, Steel and Bitumen) shall be payable as per GO No: FD/3/PCL/2008 Bangalore Dated 21.11.2008. None 1719390703000 0 None None ELIGIBILITY The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the e-procurement portal. The Original Formats/Documents shall be produced at the time of opening of Technical Bid for physical verification. None 1719390713000 0 None None ELIGIBILITY The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion. None 1719390722000 0 None None ELIGIBILITY The Agency shall comply with ISO14001 (Environmental Management System) requirement during execution of work. None 1719390727000 0 None None ELIGIBILITY The defect liability period for the work is 12 (Twelve) calendar months. None 1719390734000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. None 1719390742000 0 None None ELIGIBILITY Contractor should establish a fully functional laboratory at site at their own cost and risk in order to carry out all the required tests for the materials and work being used in the project for satisfactory completion. None 1719390751000 0 None None ELIGIBILITY The time stipulated for completion of work is 11 (Eleven) calendar months including rainy season. None 1719390763000 0 None None ELIGIBILITY The Tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the original Certificates and attach file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical bids for physical verification. None 1719390767000 0 None None ELIGIBILITY G.S.T. at the prevailing rates will be given separately. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactorily completed (at least 50%) as prime contractor at-least one such similar work of value not less than Rs. 60.08 Lakhs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work ((1) Earthwork in both excavation & Embankment: 569.00 cum, (2) PCC/RCC: 175.00 cum, (3) Steel work in built up tubular (round, square or rectangular hollow etc.,) Trusses / Steel: 37853.00 Kgs, (4) Plastering: 744.00 Sqm, (5) Flooring: 90.00 Sqm, (6) UCRS/SSM/BBM : 171.76 Cum) (80% of peak rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Constitutional or Legal Status of the Tenderer. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Banker Details for reference Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Banker Details for reference None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing works None None None None List of works for which tenders already submitted Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None List of Financial Resources with Certificates Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of Financial Resources with Certificates None None None None As per Govt. Order FD 263 EXP-12/2022 Dt. 11.05.2022 Machinery details Exempted for below Rs. 300.00 Lakhs Works. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Machinery Details None None None None Total value of civil engineering works executed and payments received in the last five years (year-wise) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 243.17 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 60.80 Lakhs (estimated cash flow for 3 months of peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None GST Registration Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList	documentName optional documentTypeText PWD Registration Certificate True Technical Bid Annual Turnover Certificate True Technical Bid Similar Nature of work Done Certificate as Prime Certificate from competent authority not below the rank of Executive Engineer or equivalent. True Technical Bid Details of machineries including ownership document for proof ownership True Technical Bid Line of credit True Technical Bid Other relevant documents. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719408772000 version 0 createdDate None modifiedDate None blockNumber Zilla Panchayat Office Building, Maniyar Taleem, Fort Road street None city Bidar state Karnataka pin 585401
tenderRecallDTO	None