| 3396887 | 119726 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m CSR 2023-24 P.No 5 / I.No 1.4.1 Vol-1 | Cum | 254.1 | 254.1 | 31.51 | False | None | None | False | None | False | 8006.691 | 0 |
| 3396888 | 119726 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing,and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates.CSR 2023-24 P.No 15 / I.No 2.1.2 Vol-1. | Cum | 5947.2 | 5947.2 | 8.372 | False | None | None | False | None | False | 49789.9584 | 0 |
| 3396889 | 119726 | None | code03 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. For foundation CSR 2023-24 P.No 16 / I.No 2.3.1 Vol-1. | Cum | 6639.15 | 6639.15 | 23.3 | False | None | None | False | None | False | 154692.195 | 0 |
| 3396890 | 119726 | None | 4a. | Addendum I Percentage Additionalities for Formwork ,Centering Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5percentage) SI No. 4 P.No. 111 S.R 2023-24 Volume-I For footing ( 8 percentage for Concrete qty rate) | Cum | 531.13 | 531.13 | 3.887 | False | None | None | False | None | False | 2064.50231 | 0 |
| 3396891 | 119726 | None | 4b. | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) For Cloumn ( 70% for Concrete qty rate) | Cum | 4647.4 | 4647.4 | 2.228 | False | None | None | False | None | False | 10354.4072 | 0 |
| 3396892 | 119726 | None | 4c. | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) For Plinth Beam (50% for Concrete qty rate) | Cum | 3319.57 | 3319.57 | 2.962 | False | None | None | False | None | False | 9832.56634 | 0 |
| 3396893 | 119726 | None | 4d. | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) For lintel and roof beams (60% for Concrete qty rate) | Cum | 3983.49 | 3983.49 | 2.9621 | False | None | None | False | None | False | 11799.495729 | 0 |
| 3396894 | 119726 | None | 4e. | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) For chejja (45% for Concrete qty rate) | Cum | 2987.61 | 2987.61 | 0.486 | False | None | None | False | None | False | 1451.97846 | 0 |
| 3396895 | 119726 | None | 4f. | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) For roof slab (50% for Concrete qty rate) | Cum | 3319.57 | 3319.57 | 7.56 | False | None | None | False | None | False | 25095.9492 | 0 |
| 3396896 | 119726 | None | code05 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. It No. 2.11 H P.No. 18 C.S.R 2023-24 P.No. 19 / I.No. 2.11 a (Volume-I) | Kg | 93929.85 | 93929.85 | 2.0971 | False | None | None | False | None | False | 196980.288435 | 0 |
| 3396897 | 119726 | None | code06 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge ofwork. PWD CSR 2023-24 Page No 14 I No 6.8 (Volume-I) | Cum | 8367.45 | 8367.45 | 23.395 | False | None | None | False | None | False | 195756.49275 | 0 |
| 3396898 | 119726 | None | code07 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. CSR 2023-24 P.No 99 / I.No 12.12 Vol-2. | Cum | 130412.1 | 130412.1 | 0.198 | False | None | None | False | None | False | 25821.5958 | 0 |
| 3396899 | 119726 | None | code08 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. CSR 2023-24 P.No 104 / I.No 12.51 Vol-2. | Nos | 1066.8 | 1066.8 | 2.0 | False | None | None | False | None | False | 2133.6 | 0 |
| 3396900 | 119726 | None | code09 | Providing and fixing in position fully glazed shutters for ventilators side hung or central pivoted with Mathi/Nandi wood stiles and rails of 30mm thick 50mm wide and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden beading of size 10mm wide flushed to the thickness of the frame including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) CSR 2023-24 P.No 100 / I.No 12.18 Vol-2. | Sqm | 6904.8 | 6904.8 | 3.78 | False | None | None | False | None | False | 26100.144 | 0 |
| 3396901 | 119726 | None | code10 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. SR 2023-24 Page No104 I No 12.53(Volume-II) | Sqm | 1667.4 | 1667.4 | 6.93 | False | None | None | False | None | False | 11555.082 | 0 |
| 3396902 | 119726 | None | code11 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SR 2023-24 Page No 104 I No 12.54 Base Rate 318.00 Add 5% 15.90 =333.90 (Volume-II) | Mtr | 333.9 | 333.9 | 23.4 | False | None | None | False | None | False | 7813.26 | 0 |
| 3396903 | 119726 | None | code12 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In charge including cost of materials, labour, usage charges of machinery complete as per specifications.. CSR 2023-24 P No. 86 /I No.11.31 Vol-2 | Kg | 120.75 | 120.75 | 486.0 | False | None | None | False | None | False | 58684.5 | 0 |
| 3396904 | 119726 | None | code13 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. CSR 2023-24 P No. 89/I No.11.37.2 Vol-2 | Sqm | 1229.55 | 1229.55 | 14.8499 | False | None | None | False | None | False | 18258.694545 | 0 |
| 3396905 | 119726 | None | code14 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.CSR 2023-24 P No. 41/I No.8.3.1 Vol-2 | Sqm | 371.7 | 371.7 | 272.922 | False | None | None | False | None | False | 101445.1074 | 0 |
| 3396906 | 119726 | None | code15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm. CSR 2023-24 P No. 60/I No.9.12.2 Vol-2 | Sqm | 1202.25 | 1202.25 | 30.6916 | False | None | None | False | None | False | 36898.9761 | 0 |
| 3396907 | 119726 | None | code16 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. SR 2023-24 Page No 60 I No 9.10 (Volume-III) | Sqm | 1161.3 | 1161.3 | 2.16 | False | None | None | False | None | False | 2508.408 | 0 |
| 3396908 | 119726 | None | code17 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SR 2023-24 Page No 65 I No 9.39 (Volume-II) | Sqm | 1521.45 | 1521.45 | 1.725 | False | None | None | False | None | False | 2624.50125 | 0 |
| 3396909 | 119726 | None | code18 | Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.SR 2023-24 Page No 65 I No9.40 (Volume-II) | Sqm | 978.6 | 978.6 | 12.48 | False | None | None | False | None | False | 12212.928 | 0 |
| 3396910 | 119726 | None | code19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm. SR 2023-24 Page No 60 I No 9.12.2 (Volume-II) | Sqm | 5128.2 | 5128.2 | 19.61 | False | None | None | False | None | False | 100564.002 | 0 |
| 3396911 | 119726 | None | code20 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests SR 2023-24 Page No 131 I No 14.1.1 (Volume-II) | Each | 5128.2 | 5128.2 | 1.0 | False | None | None | False | None | False | 5128.2 | 0 |
| 3396912 | 119726 | None | code21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 SR 2023-24 Page No 119 I No 13.12 (Volume-III) | Nos | 666.75 | 666.75 | 4.0 | False | None | None | False | None | False | 2667.0 | 0 |
| 3396913 | 119726 | None | code22 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore SR 2023-24 Page No 117 I No 13.4.1 Base Rate 549 Add 5% 27.45=576.45 (Volume-III) | Nos | 576.45 | 576.45 | 2.0 | False | None | None | False | None | False | 1152.9 | 0 |
| 3396914 | 119726 | None | code23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.CSR 2023-24 P No. 45/I No.8.25 Vol-2 | Sqm | 143.85 | 143.85 | 109.692 | False | None | None | False | None | False | 15779.1942 | 0 |
| 3396915 | 119726 | None | code24 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.CSR 2023-24 P No. 46/I No.8.30 Vol-2 | Sqm | 182.7 | 182.7 | 114.2699 | False | None | None | False | None | False | 20877.11073 | 0 |
| 3396916 | 119726 | None | code25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.CSR 2023-24 P No. 48/I No.8.41 Vol-2 | Sqm | 189.37 | 189.37 | 22.4099 | False | None | None | False | None | False | 4243.762763 | 0 |
| 3396917 | 119726 | None | code26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SR 2023-24 Page No123 I No 13.34 (Volume-II) | Nos | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 |
| 3396918 | 119726 | None | code27 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20mm nominal bore SR 2023-24 Page No.119 I No 13.102 (Volume-II) | No | 255.15 | 255.15 | 2.0 | False | None | None | False | None | False | 510.3 | 0 |
| 3396919 | 119726 | None | code28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes SR 2023-24 Page No.122 I No 13.31.2 (Volume-II) | No | 254.1 | 254.1 | 24.0 | False | None | None | False | None | False | 6098.4 | 0 |
| 3396920 | 119726 | None | code29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes SR 2023-24 Page No.122 I No 13.31.3 (Volume-II) | Mtr | 333.9 | 333.9 | 10.0 | False | None | None | False | None | False | 3339.0 | 0 |
| 3396921 | 119726 | None | code30 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc 100x58x1.9mm. CSR 2023-24 P No. 106/I No.12.68.2 Vol-2 | Nos | 45.15 | 45.15 | 6.0 | False | None | None | False | None | False | 270.9 | 0 |
| 3396922 | 119726 | None | code31 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100mm. CSR 2023-24 P No. 107/I No.12.3.2 Vol-2 | Nos | 38.85 | 38.85 | 4.0 | False | None | None | False | None | False | 155.4 | 0 |
| 3396923 | 119726 | None | code32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .CSR 2023-24 P No. 105/I No.12.63 Vol-2 | Nos | 136.5 | 136.5 | 4.0 | False | None | None | False | None | False | 546.0 | 0 |
| 3396924 | 119726 | None | code33 | Supplying heavy gauge PVC Conduit Pipe 20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. P No.2/I No. 1.3.1 CSR Ele SR 2023-24 Vol-6 | Mtr | 75.0 | 75.0 | 20.0 | False | None | None | False | None | False | 1500.0 | 0 |
| 3396925 | 119726 | None | code34 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch box . P No.5/I No. 2.2.1 CSR Ele SR 2023-24 Vol-6 | Nos | 269.0 | 269.0 | 8.0 | False | None | None | False | None | False | 2152.0 | 0 |
| 3396926 | 119726 | None | code35 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" (300 x 300 x 76 mm). P No.3/I No. 1.6.1 CSR Ele SR 2023-24 Vol-6 | Each | 120.0 | 120.0 | 1.0 | False | None | None | False | None | False | 120.0 | 0 |
| 3396927 | 119726 | None | code36 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Lamp Holder P No.10/I No. 3.14.6 CSR Ele SR 2023-24 Vol-6 | Each | 71.0 | 71.0 | 8.0 | False | None | None | False | None | False | 568.0 | 0 |
| 3396928 | 119726 | None | code37 | 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 2.5 Sqmm Weight per 100 Mtr Coil: 1.8 Kg P No.10/I No. 3.14.6 CSR Ele SR 2023-24 Vol-6 | Nos | 1791.0 | 1791.0 | 1.0 | False | None | None | False | None | False | 1791.0 | 0 |
| 3396929 | 119726 | None | code38 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16 Amps P No.14/I No. 5.7.1 CSR Ele SR 2023-24 Vol-6 | Nos | 157.0 | 157.0 | 1.0 | False | None | None | False | None | False | 157.0 | 0 |
| 3396930 | 119726 | None | code39 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch P No.09 /I No. 3.6.10 CSR Ele SR 2023-24 Vol-6 | Nos | 236.0 | 236.0 | 1.0 | False | None | None | False | None | False | 236.0 | 0 |
| 3396931 | 119726 | None | code40 | Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6k A.16 - 32 A SP. P No.21/I No. 5.46.1 CSR Ele SR 2023-24 Vol-6 | Nos | 210.0 | 210.0 | 1.0 | False | None | None | False | None | False | 210.0 | 0 |
| 3396932 | 119726 | None | code41 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.1 to 2 Way. P No.3/I No. 1.6.6 CSR Ele SR 2023-24 Vol-6 | Nos | 38.0 | 38.0 | 1.0 | False | None | None | False | None | False | 38.0 | 0 |
| 3396933 | 119726 | None | code42 | GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. P No.22/I No. 51.01 CSR Ele SR 2023-24 Vol-6 | Nos | 743.0 | 743.0 | 2.0 | False | None | None | False | None | False | 1486.0 | 0 |
| 3396934 | 119726 | None | code43 | Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. P No.22/I No. 51.02 CSR Ele SR 2023-24 Vol-6 | Nos | 676.0 | 676.0 | 2.0 | False | None | None | False | None | False | 1352.0 | 0 |
| 3396935 | 119726 | None | code44 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. P No.22/I No. 51.03 CSR Ele SR 2023-24 Vol-6 | Nos | 310.0 | 310.0 | 1.0 | False | None | None | False | None | False | 310.0 | 0 |
| 3396936 | 119726 | None | code45 | Digging of Pit for providing GI Pipe type Earthing LABOUR RATE Ordinary soil. P No.43/I No. 1.6.1 CSR Ele SR 2023-24 Vol-6 | Per Pit | 759.0 | 759.0 | 2.0 | False | None | None | False | None | False | 1518.0 | 0 |
| 3396937 | 119726 | None | code46 | 8 SWG GI Wire MT - PER KG (4.064 mm Dia), Std Wt: 125 Kg/KM. P No.3/I No.8.02 BESCOM PART 3 SR 2021-22 | Per Kg | 77850.0 | 77850.0 | 0.02 | False | None | None | False | None | False | 1557.0 | 0 |
| 3396938 | 119726 | None | code47 | Brass Cable Gland 25mm. P No.28/I No.68 CSR Ele SR 2023-24 Vol-6 | Nos | 79.0 | 79.0 | 2.0 | False | None | None | False | None | False | 158.0 | 0 |
| 3396939 | 119726 | None | code48 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010 2C x 6 mm2 P No.4/I No.2.5.21 PWD Ele SR 2021-22 | Mtr | 179.0 | 179.0 | 15.0 | False | None | None | False | None | False | 2685.0 | 0 |
| 3396940 | 119726 | None | code49 | For Electrical meter charges Hescom | Nos | 19500.0 | 19500.0 | 1.0 | False | None | None | False | None | False | 19500.0 | 0 |