| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1718772335000 | 0 | None | None | Buildings | CONSTRUCTION OF COMPOUND WALL & PROCUREMENT OF FURNITURES TO VVIP GUEST HOUSE IN MUDDEBIHAL. (HOA-4059) | 7045639.24 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3307298 | 115372 | None | V-1 1.2 | Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.
| Cum | 712.43 | 712.43 | 525.07 | False | None | None | False | None | False | 374075.6201 | 0 | | 3307299 | 115372 | None | V-1 2.1.6 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.
| Cum | 7735.08 | 7735.08 | 118.13 | False | None | None | False | None | False | 913745.0004 | 0 | | 3307300 | 115372 | None | V-2 5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth
level with "
| Cum | 6952.03 | 6952.03 | 52.85 | False | None | None | False | None | False | 367414.7855 | 0 | | 3307301 | 115372 | None | V-1 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 7850.3 | 7850.3 | 48.94 | False | None | None | False | None | False | 384193.682 | 0 | | 3307302 | 115372 | None | V-2 6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
| Sqm | 1623.09 | 1623.09 | 499.18 | False | None | None | False | None | False | 810214.0662 | 0 | | 3307303 | 115372 | None | V-2 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a
top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished rough with sponge to brick masonry including
rounding off corners wherever required smooth rendering, providing and
removing scaffolding, including cost of materials, labour, curing complete
as per specifications and as per directions of Engineer-in-charge"
| Sqm | 477.02 | 477.02 | 1334.4 | False | None | None | False | None | False | 636535.488 | 0 | | 3307304 | 115372 | None | V-2 8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge
| Sqm | 215.59 | 215.59 | 1334.4 | False | None | None | False | None | False | 287683.296 | 0 | | 3307305 | 115372 | None | V-2 8.29 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge
| Sqm | 350.64 | 350.64 | 1334.4 | False | None | None | False | None | False | 467894.016 | 0 | | 3307306 | 115372 | None | V-1 2.11h | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures
| Tonne | 97894.63 | 97894.63 | 7.57 | False | None | None | False | None | False | 741062.3491 | 0 | | 3307307 | 115372 | None | V-2 11.16.2 | Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge."
| Kg | 182.13 | 182.13 | 816.0 | False | None | None | False | None | False | 148618.08 | 0 | | 3307308 | 115372 | None | V-2 11.26.3 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge
| Kg | 226.74 | 226.74 | 816.0 | False | None | None | False | None | False | 185019.84 | 0 | | 3307309 | 115372 | None | V-1 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.
| Cum | 8478.48 | 8478.48 | 83.61 | False | None | None | False | None | False | 708885.7128 | 0 | | 3307310 | 115372 | None | V-3 6.8.1 | Providing and laying 60mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge(WMM/WBM Base to be paid separately if necessary as
per relevant technical specification)"
| Sqm | 1323.25 | 1323.25 | 300.0 | False | None | None | False | None | False | 396975.0 | 0 | | 3307311 | 115372 | None | V-3 8.42.3 | Supplying and fixing M15 grade precast cement concrete Kerb
stones for Roadway, Sidewalls and gutters fixed with CM 1:3
fixed and finsihed in line as per direction of Engineer in charge.
(The cost of PCC shall be paid extra)600 x 300 x 150 mm size"
| Rmtr | 573.66 | 573.66 | 120.0 | False | None | None | False | None | False | 68839.2 | 0 | | 3307312 | 115372 | None | V-2B 10.26 | Providing, fabricating and fixing of 10 mm thick Decorative Grooved Bamboo Wood Wall cladding with panel size 1220mmx2440mm, thermal insulation value 2.2 J/g oC & having density 1300kg/m3. The base material shall be of MDF and the surface of Bamboo shall be coated with Graphene based PU Coating. The material shall possess special properties such as Fire resistant, Thermal insulation, Sound absorbent and UV & Water resistant. The panel shall be fixed on walls using Mild steel screws or by using special adhesives as per direction of Engineer in charge.
| Sqm | 2508.98 | 2508.98 | 29.1 | False | None | None | False | None | False | 73011.318 | 0 | | 3307313 | 115372 | None | V-2 7.37.1 | Providing and fixing Mangalore tile roofing using first class tiles with
necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters including cost of materials, labour, curing complete as per specifications Nandi wood reepers of size 50x25mm"
| Sqm | 998.63 | 998.63 | 15.0 | False | None | None | False | None | False | 14979.45 | 0 | | 3307314 | 115372 | None | V-2 9.31 | Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and
as directed by the Engineer-in-Charge."
| Sqm | 2583.32 | 2583.32 | 22.75 | False | None | None | False | None | False | 58770.53 | 0 | | 3307315 | 115372 | None | V-1 111 1a | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Foundation upto Plinth a. Isolated Formwork 8% | Cum | 628.02 | 628.02 | 38.41 | False | None | None | False | None | False | 24122.2482 | 0 | | 3307316 | 115372 | None | V-1 111 2 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Foundation upto Plinth Beams of Buildings
| Cum | 3925.15 | 3925.15 | 22.57 | False | None | None | False | None | False | 88590.6355 | 0 | | 3307317 | 115372 | None | V-1 111 9 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Foundation upto Plinth Beams of Buildings RCC Columns / Shaft (Slip Centering)
| Cum | 5495.21 | 5495.21 | 31.15 | False | None | None | False | None | False | 171175.7915 | 0 | | 3307318 | 115372 | None | V-1 111 3 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Foundation upto Plinth Beams of Buildings RCC Columns / Shaft (Slip Centering)Foundation, Sub structure of Cross drainages
| Cum | 392.52 | 392.52 | 14.66 | False | None | None | False | None | False | 5754.3432 | 0 | | 3307319 | 115372 | None | V-1 111 4 | Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Foundation upto Plinth Beams of Buildings RCC Columns / Shaft (Slip Centering) Cement Concrete Drain Walls
| Cum | 2747.61 | 2747.61 | 25.76 | False | None | None | False | None | False | 70778.4336 | 0 | | 3307320 | 115372 | None | V-1 1.8 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
| Cum | 587.29 | 587.29 | 80.54 | False | None | None | False | None | False | 47300.3366 | 0 |
| | 1718772335000 | 0 | None | None | Buildings | PROCUREMENT OF FURNITURES TO VVIP GUEST HOUSE IN MUDDEBIHAL. (HOA-4059) | 2476084.9 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3307321 | 115373 | None | AR- | kurlon Not applicable for items other than Rubberised Coir Cushions bedclothes rubberised coir mattress cushions and pillows hospital mattresses and pillows Dimensions of Rubberised Coir Bed Mattresses (Length X Width X Thickness (cm) 190.5 X 91.4 X 10.2 Bed Mattresses conforming to IS:13489/2000 Latest, Type 2. Inner Cushioning Material Rubberized Coir Sheets Medium Grade conforming to specification No.IS:8391-87 Latest. The Inner Cushioning Material to be pasted with Inner Protective Blanket. The outer cover shall be of Floral Jacquard Tapestry cloth in dark Green or Blue or Pink shade
| Each | 4200.0 | 4200.0 | 4.0 | False | None | None | False | None | False | 16800.0 | 0 | | 3307322 | 115373 | None | AR- | Pillow - Synthetic
DIMENSIONS Length 700 millimeter Width 400 millimeter
Height of pillow at center 170 millimeter BODY FABRIC
Cloth plain weave Polyester cotton (67:33) white
Ends per cm 40 Picks per cm 30
Body fabric mass (g/ square mtr) 110 gram"
| Each | 1000.0 | 1000.0 | 8.0 | False | None | None | False | None | False | 8000.0 | 0 | | 3307323 | 115373 | None | AR- | Unbranded Cotton Double (1 bedsheet and 2 pillow covers) Bed Sheets-Handicraft
Specifications Material Cotton Patter Bordered Work Type Double (1 bedsheet and 2 pillow covers) Bedding Size Double Style Traditional
Height 85 inch Length 105 inch Width 0.1 micrometer
Material Cotton"
| Each | 1295.0 | 1295.0 | 5.0 | False | None | None | False | None | False | 6475.0 | 0 | | 3307324 | 115373 | None | AR- | JAI HIND Blanket Navy and Blanket Hospital as per Indian Navy Specification No DCV/PROV/BLANKET/2007 available at Director of Clothing and Victualling D-II , Brown
"
| Each | 2500.0 | 2500.0 | 5.0 | False | None | None | False | None | False | 12500.0 | 0 | | 3307325 | 115373 | None | AR- | UPICA Cotton Towelling And Towels as per IS 7056
UPICAR (UPICA TOWEL 155 X 80) Technical Specification of the Product Cotton Towelling And Towels as per IS 7056 Sizes (Length X Width) (CM) 155x80
Colour Bleached White Type towel Cotton Terry (Turkish)"
| Each | 790.0 | 790.0 | 10.0 | False | None | None | False | None | False | 7900.0 | 0 | | 3307326 | 115373 | None | AR- | Unbranded Double Plain weave Synthetic Knotted Carpeting ( Length X Width 150 X 210 )
Length X Width (cm) 150 X 210 Warp yarn Cotton Weft yarn Synthetic Type of knots Double Number of Knots (knots/ sq.cm) 51 Mass (g/sq.m) 81 Traverse end finish
Plain weave"
| Each | 9000.0 | 9000.0 | 4.0 | False | None | None | False | None | False | 36000.0 | 0 | | 3307327 | 115373 | None | AR- | FLOOR MAT Madhur Grass Floor Mats, Size L cm 60-70 X W 30-40 TRIBESINDIAR (TRIBAL MADHUR GRASS HANDMADE MULTICOLOUR STANDARD SIZE STRIPE 3 FOLD MAT)
Specifications Height 3 centimeter Width, cm 30-40
Length, cm 60-70 Weight 326 gram"
| Each | 1250.0 | 1250.0 | 5.0 | False | None | None | False | None | False | 6250.0 | 0 | | 3307328 | 115373 | None | AR- | Napkins and Table Cloth Cotton Khadi- as per IS: 3773
Technical Specification of the Product BIS specification No IS 3773- 1994"
| Each | 300.0 | 300.0 | 10.0 | False | None | None | False | None | False | 3000.0 | 0 | | 3307329 | 115373 | None | AR- | Unbranded Other Natural Fibers Traditional Curtains-Handicraft
Weight 6 kilogram Features Hand Embroidery Print Pattern
Floral Pieces 1 Material Other Natural Fibers Dimenssion(LXH),feet 7 x3.5 Packaging Type Polypack"
| Sq.Ft | 1250.0 | 1250.0 | 100.0 | False | None | None | False | None | False | 125000.0 | 0 | | 3307330 | 115373 | None | KSFIC.DWD - 001 | Teak Wood European Model Sofa set : 1+3+1 with teapoy and cushion. Made out of Teak Wood legs 4.5"x4.5" with curve. Front handle support patti 8"x1.5" with curve cutting. Sofa head rest patti 6"x1.5", Sofa side bars 5"x1.25". Sofa handles 4"x2" with curve. Sofa set shall be neatly finished and polished.
| Nos | 112100.0 | 112100.0 | 2.0 | False | None | None | False | None | False | 224200.0 | 0 | | 3307331 | 115373 | None | KSFIC.DWD - 015 | Teak Wood Nagin Model 2 Seater Sofa : Made out of Teak wood (Heavy Model) Back legs of size - 2.3/4'x7"x1.5"-2 Nos. , Front Legs of size -6"x5"x5"-02 Nos., 1.1/4'x5"x2"-02 Nos., with Side patti2'x4"x1.5". & Handle of - 2.1/4'x4"x2"-02 Nos.Base patti of -2.1/4'x3"x1.25" - 02 Nos., base length of 4'x3"x1.25"-01 No. & 4'x4"x1.5"-01 No., 4'x3"x1.5"-02 Nos. Seat & back pattis 2'x3"x3/4"-18/20 Nos. Teak wood reapers. Two Seater Sofa shall be neatly finished and polished.
| Nos | 44250.0 | 44250.0 | 1.0 | False | None | None | False | None | False | 44250.0 | 0 | | 3307332 | 115373 | None | KSFIC.DWD - 074 | Wardrobe : Made out of 18mm OSR PLPB ( Actiontesa or Century brand) /Ply with lamination. (One side raw Prelaminated particle board) on three sides and back of 12mm PLPB. Inner design should have drawers in the center with lock. Top 3 ft should be open with 1 hanger rod . Bottom portion should have 1 shelf or innerside or 3 or 4 Selves. Exterior to be finished with laminate.
(Rate per Sqfeet)"
| Sq.Ft | 2478.0 | 2478.0 | 35.0 | False | None | None | False | None | False | 86730.0 | 0 | | 3307333 | 115373 | None | KSFIC.DWD - 045 | Teak Wood Table : Of size 5'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H - Shape patti. Table shall be neatly finished and polished.
| Nos | 23576.4 | 23576.4 | 2.0 | False | None | None | False | None | False | 47152.8 | 0 | | 3307334 | 115373 | None | KSFIC.DWD- 046 | Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H - Shape patti. Table shall be neatly finished and polished.
| Nos | 27777.2 | 27777.2 | 1.0 | False | None | None | False | None | False | 27777.2 | 0 | | 3307335 | 115373 | None | KSFIC.DWD- 050 | Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet with shelf. Table 3 side closed with OST pre laminated sheet 12mm thickness. Complete with all
accessories like 2 locks and handles with polish. Table shall be neatly finished and polished. For top 6mm Plain glass with Diamond polish."
| Nos | 52274.0 | 52274.0 | 1.0 | False | None | None | False | None | False | 52274.0 | 0 | | 3307336 | 115373 | None | KSFIC.DWD052 | Teak Wood Typist & Computer Table (Size 4'X2') : Size: 121.92 L x 60.9cm B x 76.2cm H, Legs 4.44cm x 4.44 cm 6 nos. Side cross bars 10.16 x 2.54 cm Bottom portion 5.08 x 2.54 cm with 3 drawers or one small drawer and one cupboard on right side with 12mm OST Coverage. Top shall be made out of 1.90cm OST locking arrangements shall be provided. With Key board.
| Nos | 29901.2 | 29901.2 | 1.0 | False | None | None | False | None | False | 29901.2 | 0 | | 3307337 | 115373 | None | KSFIC.DWD-063 | Teak Wood Chair (Heavy Model) : Seat with cushion back with teakwood patti. Made out of Teak wood Chair 31 back legs 2 2 front Legs Chair side bars 31 back with 8 reapers. Chair size standard size. Chair shall be neatly finished and polished | Nos | 11776.4 | 11776.4 | 2.0 | False | None | None | False | None | False | 23552.8 | 0 | | 3307338 | 115373 | None | KSFIC.DWD-067 | Teak Wood Revolving Chair : Chair upper construction seasoned teak wood with melomon polish, Stain less steel 5 caster wheel legs, Hydraulic height adjustment. The Chair shall be neatly finished and polished.
| Nos | 16850.4 | 16850.4 | 3.0 | False | None | None | False | None | False | 50551.2 | 0 | | 3307339 | 115373 | None | KSFIC.DWD - 085 | Dressing Table With Stool : Teak wood dressing Table height 6'and middle 2.5'. Table should be of 2' height with 3 drawers on one side and door with lock on right side made out of complete teak wood. Top tobe of 1" thickness. Mirror frame to be of 4' height with 18" width. Mirror should be in 3"x1.25" frame, with stool
| Nos | 35140.4 | 35140.4 | 3.0 | False | None | None | False | None | False | 105421.2 | 0 | | 3307340 | 115373 | None | KSFIC.DWD - 087 | Notice Board : Of size 5'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth.And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish.
| Nos | 23364.0 | 23364.0 | 2.0 | False | None | None | False | None | False | 46728.0 | 0 | | 3307341 | 115373 | None | KSFIC.DWD-021 | Teak Wood Alpha Cot : Of size 6.5'x5'. Made out of Teak wood Leg size - 3.5"x3.5", side rullers 4"x2". Head side center height 32" and Bits with curve of 4" height all along the head side, with middle one flower design. Leg side center height 18" and bits with curve of 4" height all along the leg side with one flower design. Head and Leg both side 1" thickness Teak wood planks.
| Nos | 65543.1 | 65543.1 | 1.0 | False | None | None | False | None | False | 65543.1 | 0 | | 3307342 | 115373 | None | KSFIC.DWD-029 | Bed Side Table: (Small) Teak wood bed side table of size H-18" X D-15" X W-18". Made out of 2"X2" teak wood legs. The side table should have one drawer and one door, made out of 18mm ply on the front side and all other three side covered with 12 mm ply with veneer. The top and bottom should be made out of 18mm ply, top with veneer. Inside painted along with all necessary hardware.
| Nos | 9251.2 | 9251.2 | 2.0 | False | None | None | False | None | False | 18502.4 | 0 | | 3307343 | 115373 | None | KSFIC.DWD-034 | Teak Wood Dinning Table Size 8'X4' : Made out of Teak wood using 4" X 4" plain or turning leg, Table frame 4" X 1.25" Top 18mm plywood with sunmica with 3" Teak Wood Border. Table shall be neatly finished and polished.
| Nos | 44368.0 | 44368.0 | 2.0 | False | None | None | False | None | False | 88736.0 | 0 | | 3307344 | 115373 | None | KSFIC.DWD-040 | Teak Wood Dinning Chair Seat & Back Cushion : with curved legs - Front legs of size 3"x3" with curve. Rear legs of size 2.5"x1.5" with shape. Seat pattis of size 3"x1.25" with cushion. Back top pattis to be with turning of size -2"x2". Chair shall be neatly finished and polished.
| Nos | 12248.4 | 12248.4 | 16.0 | False | None | None | False | None | False | 195974.4 | 0 | | 3307345 | 115373 | None | KSFIC.DWD - 093 | Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provided suitable vertical support of 36mm Plywood. Table shall be provided with Footrest with suitable mm Plywood. Table Inner side shall be polish or paint. ( Rate per running ft.)
| Rmtr | 5711.2 | 5711.2 | 100.0 | False | None | None | False | None | False | 571120.0 | 0 | | 3307346 | 115373 | None | KSFIC.DWD - 121 | Single Cot: of size 75''X30''X18'' using 18mm ply with one side laminate / 16g sheet for the bed and the framework is made by using 1''X2'' rectangular of 16g and 1''X1'' Square pipe for necessory support with two cote enamel paint with curtain rod using 5/8'' 20g round pipe.
| Nos | 13924.0 | 13924.0 | 3.0 | False | None | None | False | None | False | 41772.0 | 0 | | 3307347 | 115373 | None | KSFIC.DWD - 071 | Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin.
| Nos | 5392.6 | 5392.6 | 51.0 | False | None | None | False | None | False | 275022.6 | 0 | | 3307348 | 115373 | None | KSFIC.DWD-023 | Teak Wood Carving Cot size 6'x7' : Made out of Teak wood cot Leg size 3" x 3", side bars (side runners) 5"x1.5" , Leg side height 18", head side height 33". Top to be 18mm ply/partical board. Bottom support patti 3"x2" jungle wood -4 Nos. Head and Leg side Teak wood patties with carving. Without Mosquito Frame. Cot shall be neatly finished and polished
| Nos | 86317.0 | 86317.0 | 3.0 | False | None | None | False | None | False | 258951.0 | 0 |
|
|
|---|
| technicalCriterionList | | createdTs | version | createdDate | modifiedDate | description | criterionCategoryText | criterionTypeOthersValue | tenderTechnicalCriterionDocumentList |
|---|
| None | None | None | None | Executed in any one year the following minimum quantities of work(2019-20 to 2023-24) 1) Earth work Excavation 484.48 cum 2) Providing and constructing Brick Masonry/Stone Masonry 42.28 Cum 3) Providing and laying Cement concrete (PCC/RCC) work 200.54 Cum 4) Steel work 6.056 MT 5) Plastering 1067.52 Sqm | Past Experience | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Work Done Certificate with Indent Number in formet 3 in support of formet 4 |
| | None | None | None | None | To qualify for the award of this contract each tenderer in his name should have in the last five years financial years. 2019-20 to 2023-24. (b) satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work of value not less than Rs. 47.60 Lakhs | Past Experience | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Work done certificate with Indent Number from Employer. Information in format 2 with indent number |
| | None | None | None | None | Each Tenderer should further demonstrate: a)Availability by owning, owning/Hire/Lease basis, Govt circular on GO-FD/AE 263/EXP12-2022, dated- 11-05-2022, this clause for owning key equipments for works costing upto Rs. 3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in constructions as per MORTH specification.(1) Self Loading Concrete Mixer.(2) Concrete Mixer with Hopper. (3) Water Tanker.(4) Shuttering materials. (5) Pin Vibrators.(6) Plate vibrators | Capabilities of Vendor | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Scanned copy of relevant documents to be furnished. Information in format 8 |
| | None | None | None | None | Asessed Tender capacity shall be more than the tendered amount | Capabilities of Vendor | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Asessment on the letter head of the tenderer |
| | None | None | None | None | Tenderers who meet the above specified minimum qualifying criteria,will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity-(AxNx1.5-B)Where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited -0.5Year(6 Month) B-Value at 2024-25 price level, of existing commitments and ongoing works to be completed during the next 0.5 year(6 month) form the probable date of Award of this contract | Capabilities of Vendor | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Statement on the Letter head of the tenderer |
| | None | None | None | None | Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. (Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25) | Financial Status | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Information on the Letter Head of the tenderer |
| | None | None | None | None | Value at 2024-25 price level, of existing commitments and on-going works to be executed during the next 6 months(Financial commitment of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25), (Morthwise commitment shall be furnished). | Financial Status | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Statement on the Letter head of the tenderer |
| | None | None | None | None | Latest income tax certificate | Financial Status | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Scanned copy of ITC certificate |
| | None | None | None | None | The tenderer shall furnish ,as part of his tender,EMD in the amount as shown in column 4 of the table of IFT for this particular work.The E.M.D. Rs. 1,91,000.00/- shall be paid in full through E-payment or in two parts part(1)Rs.50,000/- BY E-PAYMENT. Part (2) balance EMD of Rs. 1,41,000.00/- EMD shall be in favour of Executive Engineer, PWD Vijayapur Division Vijayapur. And should be in the form of Bank Guarantee in the Prescribed format obtained from any Nationalised / Scheduled Bank. The Part(2) of the EMD shall be delivered to the Executive Engineer before the prescribed date and time of opening of the Technical Bids. Earnest Money Deposit/ Bid security | Financial Status | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Scanned copy of FDR /Pledged small saving instrument / BG |
| | None | None | None | None | Each Tenderer should further demonstrate (b) liquid assets /or availability of credit facilities of not less than Rs. 28.56 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.as per 1.10 Section 3 Qualification Information | Financial Status | None | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Letter of Credit/Bankers Certifate from Scheduled Bank or Nationalized Bank |
| | None | None | None | None | Information on works are yet to be completed. | Others | Committed works | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Information in format 5 certificates in format 3 |
| | None | None | None | None | Information on works for which tender acceptance letters are received. | Others | New works | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Information in format 6 letter of acceptance |
| | None | None | None | None | Name, Address, Telephone No, Fax No, E-mail ID of the tenderers bankers. | Others | Bankers Details | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Information on the letter head of the tenderer |
| | None | None | None | None | Constistutional or legal status of the tenderer | Others | Legal status | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Copy of registration document |
| | None | None | None | None | The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion. | Others | CPM/PERT | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- CPM/PERT Chart |
| | None | None | None | None | Constistutional or legal status of the tenderer | Others | Legal status | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Copy of registration document |
| | None | None | None | None | Information on litigation in which the Tenderer is involved. | Others | Litigation | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Information in format 10 |
| | None | None | None | None | To qualify for the award of this contract each tenderer in his name should have in the last five year financial years. 2019-20 to 2023-24 (a) achieved in atleast two financial years a Average financial turnover (in all classes of civil engineering construction works only) of Rs.95.21 Lakhs. | Others | Financial Status | | createdTs | version | createdDate | modifiedDate | documentName |
|---|
| None | None | None | None | Others -- Certificate from Chartered Accountant yearwise from 2019-20 to 2023-24. Information in format 1 |
|
|
|---|