createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719228232733 version 12 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 4180.00 emd 195500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-07-2024 17:00:00 tenderQueryClose 02-07-2024 11:00:00 technicalBidOpen 06-07-2024 17:30:00 publishedDate 28-06-2024 16:30:32 publishedByPost PWD_EE_SPLDIV_SMG publishedByUser KPE11177 - VIJAYAKUMAR Y N bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate 04-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Vijayakumar Y N splitEmdRequiredYn True emdBankGuarantee 95500.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08182222942 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1719228232735 version 19 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT10013/CALL-2 title CONSTRUCTION OF CHIEF ENGINEERS RESIDENCE IN SHIVAMOGGA description CONSTRUCTION OF CHIEF ENGINEERS RESIDENCE IN SHIVAMOGGA. category WORKS categoryText Works ecv 16683014.28 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1701 locationName PWD Special Division Office Shivamogga provisionalAmount 20000000.0 groupOverheadTotal None fileNumber CE-Residence-shivamogga
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719228233000 1 None None Buildings Ground Floor 7427776.02 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337580 117160 None VOL 3, P.No-9, I.No.2.5(ii)a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (SR 2023-24/ Vol -3 Sl No- 2.5(ii)a /P.No.9). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead 100 Sqm 412.65 412.65 12.4 False None None False None False 5116.86 0 3337581 117160 None VOL 1, P.No-8, I.No.1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (SR 2023-24/ Vol -1 Sl No- 1.12 /P.No.8). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 99.75 99.75 372.0 False None None False None False 37107.0 0 3337582 117160 None VOL 1, P.No-8, I.No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (SR 2023-24/ Vol -1 Sl No-1.14.1 /P.No.8). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 107.1 107.1 333.51 False None None False None False 35718.921 0 3337583 117160 None VOL 2, P.No-5, I.No.4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications (SR 2023-24/ Vol -2 Sl No- 4.1 /P.No.5). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 123.9 123.9 234.62 False None None False None False 29069.418 0 3337584 117160 None VOL 1, P.No-15, I.No.2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.1.3 /P.No.15). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6288.45 6288.45 64.08 False None None False None False 402963.876 0 3337585 117160 None VOL 1, P.No-15, I.No.2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.2.3 /P.No.15). including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6852.38 6852.38 72.52 False None None False None False 496934.5976 0 3337586 117160 None VOL 1, P.No-16, I.No.2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.4.3 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 11309.76 11309.76 4.58 False None None False None False 51798.7008 0 3337587 117160 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 12214.76 12214.76 7.43 False None None False None False 90755.6668 0 3337588 117160 None VOL 2, P.No-9, I.No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 (1 cement : 6 coarse sand)(SR 2023-24/ Vol -2 Sl No-5.4 /P.No.9).: ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6708.45 6708.45 29.32 False None None False None False 196691.754 0 3337589 117160 None VOL 1, P.No-16, I.No.2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.4.3 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 9979.2 9979.2 18.44 False None None False None False 184016.448 0 3337590 117160 None VOL1, P.No-7, I.No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(SR 2023-24/ Vol -1 Sl No- 1.9 /P.No.07). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 279.3 279.3 333.51 False None None False None False 93149.343 0 3337591 117160 None VOL2, P.No-14, I.No.6.8 Providing Brick work with common burnt clay Non modular bricks of class designation 3.5 in Superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SR Volume -2 ,2023-24/P.No 14 /I No 6.8) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 8367.45 8367.45 70.89 False None None False None False 593168.5305 0 3337592 117160 None VOL 2, P.No-14, I.No.6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(SR 2023-24/ Vol -2 Sl No- 6.15 /P.No.14). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1084.65 1084.65 70.8 False None None False None False 76793.22 0 3337593 117160 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 11496.24 11496.24 20.59 False None None False None False 236707.5816 0 3337594 117160 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 10777.73 10777.73 44.58 False None None False None False 480471.2034 0 3337595 117160 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 10777.73 10777.73 4.85 False None None False None False 52271.9905 0 3337596 117160 None VOL 1, P.No-18, I.No.2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (a) for Buildings (SR 2023-24/ Vol -1 Sl No-2.11a /P.No.18). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead MT 93929.85 93929.85 20.95 False None None False None False 1967830.3575 0 3337597 117160 None VOL 2, P.No-41, I.No.8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(SR 2023-24/ Vol -2 Sl No- 8.1.2 /P.No.41). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 253.05 253.05 676.59 False None None False None False 171211.0995 0 3337598 117160 None VOL 2, P.No-50, I.No.8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge(SR 2023-24/ Vol -2 Sl No- 8.51 /P.No.50). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 105.0 105.0 899.5 False None None False None False 94447.5 0 3337599 117160 None VOL 2, P.No-41, I.No.8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix -1:6 (1 cement : 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(SR 2023-24/ Vol -2 Sl No- 8.2.2 /P.No.41). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 292.95 292.95 334.28 False None None False None False 97927.326 0 3337600 117160 None VOL 2, P.No-86, I.No.11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(SR 2023-24/ Vol -2 Sl No- 11.34A /P.No.85). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Kg 176.4 176.4 576.14 False None None False None False 101631.096 0 3337601 117160 None VOL 2, P.No-77, I.No.11.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge(SR 2023-24/ Vol -2 Sl No- 11.3 /P.No.75). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 8689.8 8689.8 3.78 False None None False None False 32847.444 0 3337602 117160 None VOL 2, P.No-100, I.No.12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(SR 2023-24/ Vol -2 Sl No- 12.13.2 /P.No100). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 104580.0 104580.0 0.71 False None None False None False 74251.8 0 3337603 117160 None VOL 2, P.No-99, I.No.12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (SR2021-22/ Vol -2 Sl No- 12.11 /P.No 99). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 144977.7 144977.7 0.23 False None None False None False 33344.871 0 3337604 117160 None VOL 2, P.No-105, I.No.12.57.7 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification-do- 40 mm thick both side Teak.(SR 2023-24/ Vol -2 Sl No- 12.57.7 /P.No106). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 5208.0 5208.0 12.71 False None None False None False 66193.68 0 3337605 117160 None VOL 2, P.No-100, I.No.12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) (SR 2023-24/ Vol -2 Sl No- 12.14 /P.No100). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 7816.2 7816.2 4.92 False None None False None False 38455.704 0 3337606 117160 None VOL 2, P.No-63, I.No.9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent(SR 2023-24/ Vol -2 Sl No- 9.24/P.No63). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 2994.6 2994.6 82.9 False None None False None False 248252.34 0 3337607 117160 None VOL 2, P.No-62, I.No.9.21.5 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS-15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS - 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x1200 mm (SR 2023-24/ Vol -2 Sl No- 9.21.5/P.No62). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1892.1 1892.1 190.94 False None None False None False 361277.574 0 3337608 117160 None VOL 2, P.No-46, I.No.8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls @ 1.25 ltr/10 Sqm over and including one coat of Special primer applied @ 0.75 ltr /10 Sqm with paint of approved quality to give an even shade,after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) (SR 2023-24/ Vol -2 Sl No- 8.33.1 /P.No.46). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 165.9 165.9 899.5 False None None False None False 149227.05 0 3337609 117160 None VOL 2, P.No-46, I.No.8.3 Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost ofmaterials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.30 /P.No.46). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 182.7 182.7 334.28 False None None False None False 61072.956 0 3337610 117160 None VOL 2, P.No-47, I.No.8.34.2 Applying priming coat- With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.34.2 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 60.9 60.9 41.15 False None None False None False 2506.035 0 3337611 117160 None VOL 2, P.No-47, I.No.8.36.1 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.36.1 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 184.8 184.8 41.15 False None None False None False 7604.52 0 3337612 117160 None VOL 2, P.No-48, I.No.8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24/ Vol -2 Sl No- 8.41 /P.No.48). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 175.35 175.35 46.88 False None None False None False 8220.408 0 3337613 117160 None VOL 2, P.No-110, I.No.12.9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets - grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).(SR 2023-24/ Vol -2 Sl No- 12.9 /P.No.112). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 7070.7 7070.7 25.52 False None None False None False 180444.264 0 3337614 117160 None VOL 2, P.No-109, I.No.12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(SR2021-22/ Vol -2 Chapter-12 Sl No- 12.85 /P.No.110). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 6004.95 6004.95 3.0 False None None False None False 18014.85 0 3337615 117160 None VOL 2, P.No-60, I.No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.(SR 2023-24/ Vol -2 Sl No- 9.11 /P.No.60). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 933.45 933.45 10.8 False None None False None False 10081.26 0 3337616 117160 None VOL 2, P.No-65, I.No.9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(SR2021-22/ Vol -2 Sl No- 9.38 /P.No.65). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1461.6 1461.6 96.72 False None None False None False 141365.952 0 3337617 117160 None VOL 2, P.No-104, I.No.12.51 Fixing of door frame in an existing opening including embedding frame infloor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite metal paintingtwo coats of coal tar to sides of frame, making good the damages towalls and floor as required and disposal of the debris with leadupto 50 m. including cost of materials, labour charges, complete as per specifications.(SR 2023-24/ Vol -2 Sl No- 12.51 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 1066.8 1066.8 10.0 False None None False None False 10668.0 0 3337618 117160 None VOL 2, P.No-104, I.No.12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(SR 2023-24/Vol -2 Sl No.12.52 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 811.65 811.65 16.0 False None None False None False 12986.4 0 3337619 117160 None VOL 2, P.No-104, I.No.12.54 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The doorframe to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge (SR 2023-24/ Vol -2 Sl No- 12.54 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 333.9 333.9 17.4 False None None False None False 5809.86 0 3337620 117160 None VOL 2, P.No-104, I.No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hingesdo- with both side prelam.(SR 2023-24/ Vol -2 Sl No- 12.55.1 /P.No.106). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 2484.3 2484.3 4.72 False None None False None False 11725.896 0 3337621 117160 None VOL 2, P.No-85, I.No.11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR 2023-24/ Vol -2 Chapter-11 Sl No- 11.28 /P.No.83). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Kg 593.25 593.25 300.89 False None None False None False 178502.9925 0 3337622 117160 None Approved Data Rate1 Supplying and fixing Brass Hinges of size 6 inch x 1 inch x 5 mm of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work (Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 220.0 220.0 51.0 False None None False None False 11220.0 0 3337623 117160 None Approved Data Rate2 Supplying and fixing Rose Mortic Handels 6 inch of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work (Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 680.0 680.0 22.0 False None None False None False 14960.0 0 3337624 117160 None Approved Data Rate3 Supplying and fixing Mortic Door Locks of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 6270.0 6270.0 2.0 False None None False None False 12540.0 0 3337625 117160 None Approved Data Rate4 Supplying and fixing Door Closer of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 2540.0 2540.0 11.0 False None None False None False 27940.0 0 3337626 117160 None Approved Data Rate5 Supplying and fixing Door Cylender Lock of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work.(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1720.0 1720.0 7.0 False None None False None False 12040.0 0 3337627 117160 None VOL 2, P.No-219, I.No.22.22 Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge. (SR 2023-24/ Vol -2 Sl No- 22.22 /P.No.219). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1890.0 1890.0 37.62 False None None False None False 71101.8 0 3337628 117160 None Approved Data Rate6 Providing and fixing wooden storage unit one side laminate with 18mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9mm PLY with edge bound for rear portion with hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolts etc., complete a sper specifications, drawing and as directed by the Engineer-in-charge of the work. (Files Storage unit 1200x450x1500mm).(Aproved Date Rate) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 24300.0 24300.0 4.0 False None None False None False 97200.0 0 3337629 117160 None Vol -2, Sl No-8.16a, P.No.44 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. (SR 2023-24/ Vol -2 Sl No- 8.16a /P.No.44). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1299.9 1299.9 11.25 False None None False None False 14623.875 0 3337630 117160 None Vol -2, Sl No-8.16.2, P.No.43 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment - Plaster mesh 150mm wide (SR 2023-24/ Vol -2 Sl No- 8.16.2 /P.No.43). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Rmtr 39.9 39.9 180.0 False None None False None False 7182.0 0 3337631 117160 None Vol -2, Sl No-10.2, P.No.69 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (SR 2023-24/ Vol -2 Sl No- 10.2 /P.No.69). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Rmtr 344.4 344.4 30.0 False None None False None False 10332.0 0 1719228233000 1 None None Buildings First Floor 3975773.94 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337632 117161 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 12336.9 12336.9 6.06 False None None False None False 74761.614 0 3337633 117161 None VOL2, P.No-14, I.No.6.8 Providing Brick work with common burnt clay Non modular bricks of class designation 3.5 in Superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SR Volume -2 ,2023-24/P.No 14 /I No 6.8) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 8451.12 8451.12 70.52 False None None False None False 595972.9824 0 3337634 117161 None VOL 2, P.No-14, I.No.6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(SR 2023-24/ Vol -2 Sl No- 6.15 /P.No.14). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1095.5 1095.5 41.39 False None None False None False 45342.745 0 3337635 117161 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 11611.2 11611.2 7.36 False None None False None False 85458.432 0 3337636 117161 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 10885.5 10885.5 30.3 False None None False None False 329830.65 0 3337637 117161 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 10885.5 10885.5 4.85 False None None False None False 52794.675 0 3337638 117161 None VOL 1, P.No-18, I.No.2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (a) for Buildings (SR 2023-24/ Vol -1 Sl No-2.11a /P.No.18). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead t 94869.15 94869.15 6.32 False None None False None False 599573.028 0 3337639 117161 None VOL 2, P.No-41, I.No.8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(SR 2023-24/ Vol -2 Sl No- 8.1.2 /P.No.41). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 255.58 255.58 396.63 False None None False None False 101370.6954 0 3337640 117161 None VOL 2, P.No-50, I.No.8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge(SR 2023-24/ Vol -2 Sl No- 8.51 /P.No.50). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 106.05 106.05 607.13 False None None False None False 64386.1365 0 3337641 117161 None VOL 2, P.No-41, I.No.8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix -1:6 (1 cement : 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(SR 2023-24/ Vol -2 Sl No- 8.2.2 /P.No.41). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 295.88 295.88 630.74 False None None False None False 186623.3512 0 3337642 117161 None VOL 2, P.No-86, I.No.11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(SR 2023-24/ Vol -2 Sl No- 11.34A /P.No.85). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Kg 178.16 178.16 311.54 False None None False None False 55503.9664 0 3337643 117161 None VOL 2, P.No-100, I.No.12.13.2 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(SR 2023-24/ Vol -2 Sl No- 12.13.2 /P.No100). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 105625.8 105625.8 0.31 False None None False None False 32743.998 0 3337644 117161 None VOL 2, P.No-105, I.No.12.57.7 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification-do- 40 mm thick both side Teak.(SR 2023-24/ Vol -2 Sl No- 12.57.7 /P.No106). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 5260.08 5260.08 7.79 False None None False None False 40976.0232 0 3337645 117161 None VOL 2, P.No-99, I.No.12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (SR2021-22/ Vol -2 Sl No- 12.11 /P.No 99). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 146427.48 146427.48 0.1 False None None False None False 14642.748 0 3337646 117161 None VOL 2, P.No-100, I.No.12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) (SR 2023-24/ Vol -2 Sl No- 12.14 /P.No100). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 7894.36 7894.36 2.46 False None None False None False 19420.1256 0 3337647 117161 None VOL 2, P.No-63, I.No.9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. * Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent(SR 2023-24/ Vol -2 Sl No- 9.24/P.No63). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 3024.55 3024.55 28.03 False None None False None False 84778.1365 0 3337648 117161 None VOL 2, P.No-62, I.No.9.21.5 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS-15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS - 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x1200 mm (SR 2023-24/ Vol -2 Sl No- 9.21.5/P.No62). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1911.02 1911.02 100.46 False None None False None False 191981.0692 0 3337649 117161 None VOL 2, P.No-46, I.No.8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade,after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) (SR 2023-24/ Vol -2 Sl No- 8.33.1 /P.No.46). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 167.56 167.56 607.13 False None None False None False 101730.7028 0 3337650 117161 None VOL 2, P.No-46, I.No.8.3 Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost ofmaterials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.30 /P.No.46). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 184.53 184.53 630.74 False None None False None False 116390.4522 0 3337651 117161 None VOL 2, P.No-47, I.No.8.34.2 Applying priming coat- With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.34.2 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 61.51 61.51 20.1 False None None False None False 1236.351 0 3337652 117161 None VOL 2, P.No-47, I.No.8.36.1 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.36.1 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 186.65 186.65 20.1 False None None False None False 3751.665 0 3337653 117161 None VOL 2, P.No-48, I.No.8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR 2023-24/ Vol -2 Sl No- 8.41 /P.No.48). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 177.1 177.1 40.824 False None None False None False 7229.9304 0 3337654 117161 None VOL 2, P.No-110, I.No.12.9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).(SR 2023-24/ Vol -2 Sl No- 12.9 /P.No.112). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 7141.41 7141.41 18.9 False None None False None False 134972.649 0 3337655 117161 None VOL 2, P.No-109, I.No.12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(SR2021-22/ Vol -2 Chapter-12 Sl No- 12.85 /P.No.110). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 6065.0 6065.0 3.0 False None None False None False 18195.0 0 3337656 117161 None VOL 2, P.No-60, I.No.9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.(SR 2023-24/ Vol -2 Sl No- 9.11 /P.No.60). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 942.78 942.78 7.2 False None None False None False 6788.016 0 3337657 117161 None VOL 2, P.No-65, I.No.9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(SR2021-22/ Vol -2 Sl No- 9.38 /P.No.65). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1476.22 1476.22 37.44 False None None False None False 55269.6768 0 3337658 117161 None VOL 2, P.No-104, I.No.12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding hold fastin cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages towalls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(SR 2023-24/ Vol -2 Sl No- 12.51 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 1077.47 1077.47 9.0 False None None False None False 9697.23 0 3337659 117161 None VOL 2, P.No-104, I.No.12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(SR 2023-24/Vol -2 Sl No.12.52 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 819.77 819.77 14.0 False None None False None False 11476.78 0 3337660 117161 None VOL 2, P.No-104, I.No.12.54 Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The doorframe to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge (SR 2023-24/ Vol -2 Sl No- 12.54 /P.No.105). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 337.24 337.24 11.6 False None None False None False 3911.984 0 3337661 117161 None VOL 2, P.No-104, I.No.12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hingesdo- with both side prelam.(SR 2023-24/ Vol -2 Sl No- 12.55.1 /P.No.106). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 2509.14 2509.14 3.15 False None None False None False 7903.791 0 3337662 117161 None VOL 2, P.No-83, I.No.11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR 2023-24/ Vol -2 Chapter-11 Sl No- 11.28 /P.No.83). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Kg 599.18 599.18 521.2 False None None False None False 312292.616 0 3337663 117161 None VOL 2, P.No-29, I.No.7.46 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mmx 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1cement : 4 coarse sand)and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of in charge.( SR 2023-24/ Vol -2 Sl No- 7.46 /P.No.29). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1490.0 1490.0 262.23 False None None False None False 390722.7 0 3337664 117161 None Approved Data Rate1 Supplying and fixing Brass Hinges of size 6 inch x 1 inch x 5 mm of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 220.0 220.0 28.0 False None None False None False 6160.0 0 3337665 117161 None Approved Data Rate2 Supplying and fixing Rose Mortic Handels 6 inch of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 680.0 680.0 12.0 False None None False None False 8160.0 0 3337666 117161 None Approved Data Rate3 Supplying and fixing Mortic Door Locks of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 6270.0 6270.0 2.0 False None None False None False 12540.0 0 3337667 117161 None Approved Data Rate4 Supplying and fixing Door Closer of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 2540.0 2540.0 6.0 False None None False None False 15240.0 0 3337668 117161 None Approved Data Rate5 Supplying and fixing Door Cylender Lock of approved brand and make including cost and conveyance of all materials, labours, complete as per standard specifications and as directed by the Engineer-in-charge of work(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1720.0 1720.0 3.0 False None None False None False 5160.0 0 3337669 117161 None VOL 2, P.No-219, I.No.22.22 Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge. (SR 2023-24/ Vol -2 Sl No- 22.22 /P.No.219). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1908.9 1908.9 28.98 False None None False None False 55319.922 0 3337670 117161 None Approved Data Rate6 Providing and fixing wooden storage unit one side laminate with 18mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9mm PLY with edge bound for rear portion with hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolts etc., complete a sper specifications, drawing and as directed by the Engineer-in-charge of the work. (Files Storage unit 1200x450x1500mm)(Aproved Date Rate). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 24300.0 24300.0 4.0 False None None False None False 97200.0 0 3337671 117161 None Vol -2, Sl No- 8.16a, P.No.44 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. (SR 2023-24/ Vol -2 Sl No- 8.16a /P.No.44). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1312.9 1312.9 9.0 False None None False None False 11816.1 0 3337672 117161 None Vol -2, Sl No- 8.16.2, P.No.43 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment - Plaster mesh 150mm wide (SR 2023-24/ Vol -2 Sl No- 8.16.2 /P.No.43). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Rmtr 40.3 40.3 160.0 False None None False None False 6448.0 0 1719228233000 1 None None Buildings Compound & Road Work 2434850.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337673 117162 None VOL 1, P.No-8, I.No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (SR 2023-24/ Vol -1 Sl No-1.14.1 /P.No.8). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 107.1 107.1 181.95 False None None False None False 19486.845 0 3337674 117162 None VOL 1, P.No-15, I.No.2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.1.3 /P.No.15). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6288.45 6288.45 15.26 False None None False None False 95961.747 0 3337675 117162 None VOL 1, P.No-15, I.No.2.2.1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.2.1 /P.No.15). including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6799.39 6799.39 19.08 False None None False None False 129732.3612 0 3337676 117162 None VOL 1, P.No-16, I.No.2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (SR 2023-24/ Vol -1 Sl No- 2.4.3 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 9979.2 9979.2 12.74 False None None False None False 127135.008 0 3337677 117162 None VOL 1, P.No-16, I.No.2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.5.2 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 12214.76 12214.76 8.12 False None None False None False 99183.8512 0 3337678 117162 None VOL 2, P.No-9, I.No.5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement - 6 coarse sand)(SR 2023-24/ Vol -2 Sl No-5.4 /P.No.9). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6708.45 6708.45 24.3 False None None False None False 163015.335 0 3337679 117162 None VOL1, P.No-7, I.No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(SR 2023-24/ Vol -1 Sl No- 1.9 /P.No.07). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 279.3 279.3 181.95 False None None False None False 50818.635 0 3337680 117162 None VOL2, P.No-14, I.No.6.8 Providing Brick work with common burnt clay Non modular bricks of class designation 3.5 in Superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (SR Volume -2 ,2023-24/P.No 14 /I No 6.8) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 8367.45 8367.45 31.05 False None None False None False 259809.3225 0 3337681 117162 None VOL 1, P.No-18, I.No.2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (a) for Buildings (SR 2023-24/ Vol -1 Sl No-2.11a /P.No.18). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead t 93929.85 93929.85 3.48 False None None False None False 326875.878 0 3337682 117162 None VOL 2, P.No-41, I.No.8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix -1:6 (1 cement : 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(SR 2023-24/ Vol -2 Sl No- 8.2.2 /P.No.41). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 292.95 292.95 593.45 False None None False None False 173851.1775 0 3337683 117162 None VOL 2, P.No-46, I.No.8.3 Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost ofmaterials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.30 /P.No.46). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 182.7 182.7 593.45 False None None False None False 108423.315 0 3337684 117162 None VOL 2, P.No-84, I.No.11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (SR 2023-24/ Vol 2 P.No 82, I.no-11.25.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Kg 142.8 142.8 2752.5 False None None False None False 393057.0 0 3337685 117162 None VOL 2, P.No-47, I.No.8.34.2 Applying priming coat- With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.34.2 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 60.9 60.9 105.0 False None None False None False 6394.5 0 3337686 117162 None VOL 2, P.No-47, I.No.8.36.1 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge.(SR 2023-24/ Vol -2 Sl No- 8.36.1 /P.No.47). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 184.8 184.8 105.0 False None None False None False 19404.0 0 3337687 117162 None VOL3, P.No-17, I.No.3.6 Construction of Subgrade and Earthen ShouldersConstruction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2( SR Volume -3 , 2023-24/P.No15 /I No 3.6) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 517.65 517.65 39.0 False None None False None False 20188.35 0 3337688 117162 None VOL3, P.No-26, I.No.4.17 Wet Mix Macadam (Plant mix method)Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density( SR Volume -3 ,2023-24/P.No26 /I No 4.17) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 2686.95 2686.95 39.0 False None None False None False 104791.05 0 3337689 117162 None VOL3, P.No-149, I.No.16.28 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS-383-2016-, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 7091.7 7091.7 32.0 False None None False None False 226934.4 0 3337690 117162 None VOL3, P.No-51, I.No.6.8.1 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63-2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification.( SR Volume -3 ,2023-24/P.No 51 /I No 6.8.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 1121.4 1121.4 80.0 False None None False None False 89712.0 0 3337691 117162 None VOL3, P.No-63, I.No.8.1a Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1-3 fixed and finsihed in line as per direction of Engineer in charge.600 x 300 x 150 mm Kerb Stone (SR Volume -3 ,2023-24/P.No 63 /I No 8.1a) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 250.95 250.95 80.0 False None None False None False 20076.0 0 1719228233000 0 None None Buildings Water Supply & Sanitary Work 900093.38 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337692 117163 None VOL 1, P.No-8, I.No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (SR 2023-24/ Vol -1 Sl No-1.14.1 /P.No.8). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 107.1 107.1 70.95 False None None False None False 7598.745 0 3337693 117163 None VOL 1, P.No-15, I.No.2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.1.3 /P.No.15). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 6288.45 6288.45 1.63 False None None False None False 10250.1735 0 3337694 117163 None VOL 1, P.No-16, I.No.2.4.3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR 2023-24/ Vol -1 Sl No- 2.4.3 /P.No.16). Including the rate of form work & Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 7983.36 7983.36 8.35 False None None False None False 66661.056 0 3337695 117163 None VOL 1, P.No-18, I.No.2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (a) for Buildings (SR 2023-24/ Vol -1 Sl No-2.11a /P.No.18). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead t 93929.85 93929.85 1.04 False None None False None False 97687.044 0 3337696 117163 None VOL 2, P.No-41, I.No.8.3.1 Providing 20 mm cement plaster of mix -1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge( SR 2023-24/ Vol -1 Sl No- 8.3.1 /P.No.41). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 371.7 371.7 28.78 False None None False None False 10697.526 0 3337697 117163 None BWSSB, P.No-157, I.No.13.40.1 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM (BWSSB S.R,2023-2024, I.No-13.40.1,Page No.157,) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 16390.5 16390.5 1.0 False None None False None False 16390.5 0 3337698 117163 None VOL 2, P.No-122, I.No.13.31.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 20mm nominal OD pipes (S.R 2023-24, I.No-13.31.2 ,Page No.122) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 254.1 254.1 145.0 False None None False None False 36844.5 0 3337699 117163 None VOL 2, P.No-122, I.No.13.31.5 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 40mm nominal OD pipes (S.R 2023-24, I.No-13.31.5 ,Page No.122) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 562.8 562.8 135.0 False None None False None False 75978.0 0 3337700 117163 None VOL 2, P.No-122, I.No.13.31.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 50mm nominal OD pipes (S.R 2023-24, I.No-13.31.6, Page No.122,) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 820.05 820.05 100.0 False None None False None False 82005.0 0 3337701 117163 None VOL 2, P.No-123, I.No.13.34 Providing and placing on terrace (at all floor levels)polyethylene water storage tanks IS-12701 marked with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, but without fitting and the base support for tank, (PWD S.R 2023-24, Vol-2, I.No-13.34, Page No.123,) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 9.45 9.45 2000.0 False None None False None False 18900.0 0 3337702 117163 None BWSSB, P.No-121, I.No.10.14.24 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. Kg/m2 90mm (BWSSB SR 2023-24/Vol 5 P.No 121, I.no- 10.14.24) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 374.85 374.85 125.0 False None None False None False 46856.25 0 3337703 117163 None BWSSB, P.No-121, I.No.10.14.25 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.10 Kg/m2 110mm (BWSSB SR 2023-24/Vol 5 P.No 121, I.no- 10.14.25) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 530.25 530.25 200.0 False None None False None False 106050.0 0 3337704 117163 None BWSSB, P.No-121, I.No.10.14.26 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.10 Kg/m2 140mm (BWSSB SR 2023-24/Vol 5 P.No 121, I.no- 10.14.26) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 799.05 799.05 125.0 False None None False None False 99881.25 0 3337705 117163 None BWSSB, P.No-191, I.No.16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thick for fixing CI cover & frame etc. excluding the cost of CI frame and cover (BWSSB 2023-24/Vol-2, P.No 119 I.no- 16.9) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 5726.7 5726.7 10.0 False None None False None False 57267.0 0 3337706 117163 None VOL 2, P.No-119, I.No.13.14 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g (SR 2023-24/Vol 2 P.No 119, I.no-13.14) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 888.3 888.3 52.0 False None None False None False 46191.6 0 3337707 117163 None VOL 2, P.No-119, I.No.13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931. (SR 2023-24/Vol 2 P.No 119, I.no-13.15) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 761.25 761.25 45.0 False None None False None False 34256.25 0 3337708 117163 None VOL 2, P.No-131, I.No.14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid (SR 2023-24/Vol 2 P.No 123, I.no-14.2.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 5079.9 5079.9 5.0 False None None False None False 25399.5 0 3337709 117163 None VOL 2, P.No-131, I.No.14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (SR 2023-24/Vol 2 P.No 123, I.no-14.1.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 5128.2 5128.2 1.0 False None None False None False 5128.2 0 3337710 117163 None VOL 2, P.No-132, I.No.14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required- using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (SR 2023-24/Vol 2 P.No 132, I.no-14.7.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 3236.1 3236.1 6.0 False None None False None False 19416.6 0 3337711 117163 None VOL 2, P.No-137, I.No.14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (SR 2023-24/Vol 2 P.No 137, I.no-14.36.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 97.65 97.65 6.0 False None None False None False 585.9 0 3337712 117163 None VOL 2, P.No-120, I.No.13.27.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length (SR 2023-24/Vol 2 P.No 121, I.no-13.27.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Nos 121.8 121.8 6.0 False None None False None False 730.8 0 3337713 117163 None VOL 2, P.No-136, I.No.14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm- (SR 2023-24/Vol 2 P.No 136, I.no-14.32.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1068.9 1068.9 6.0 False None None False None False 6413.4 0 3337714 117163 None VOL 2, P.No-137, I.No.14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (SR 2023-24/Vol 2 P.No 137, I.no-14.40.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 520.8 520.8 6.0 False None None False None False 3124.8 0 3337715 117163 None VOL 2, P.No-117, I.No.13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)50 mm nominal bore (SR 2023-24 Vol 2 P.No 117, I.no- 13.4.4 ) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 897.75 897.75 5.0 False None None False None False 4488.75 0 3337716 117163 None VOL 2, P.No-117, I.No.13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm nominal bore (SR 2023-24 Vol 2 P.No 117, I.no- 13.4.3 ) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 737.1 737.1 2.0 False None None False None False 1474.2 0 3337717 117163 None VOL 1, P.No-7, I.No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( SR 2023-24/ Vol -1 Chapter-1 Sl No-1.9 /P.No.34). ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 279.3 279.3 70.95 False None None False None False 19816.335 0 1719228233000 0 None None Buildings Dismantling of existing old Building 267614.3 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337718 117164 None Vol-2, P.No-187, I.No.19.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge..(PWD SR 2023-24/ Vol -2 SI.No. 19.3 /P.No. 187) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 2547.3 2547.3 49.79 False None None False None False 126830.067 0 3337719 117164 None Vol-2, P.No-187, I.No.19.7.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(PWD SR 2023-24/ Vol -2 SI.No. 19.7.1 /P.No. 187) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 506.1 506.1 127.01 False None None False None False 64279.761 0 3337720 117164 None Vol-2, P.No-190, I.No.19.29 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge..(PWD SR 2023-24/ Vol -2 SI.No. 19.29/P.No. 190) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 181.65 181.65 127.64 False None None False None False 23185.806 0 3337721 117164 None Vol-2, P.No-188, I.No.19.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking to te appropriate disposal area as per direction of Engineerin-charge..Of area 3 m² and below(PWD SR 2021-22/ Vol -2 SI.No. 19.12.1 /P.No. 188) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sqm 252.0 252.0 38.13 False None None False None False 9608.76 0 3337722 117164 None Vol-2, P.No-187, I.No.19.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineerin- charge.In cement mortar.(PWD SR 2021-22/ Vol -2 SI.No. 19.9.2 /P.No. 187) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Cum 1768.2 1768.2 24.72 False None None False None False 43709.904 0 1719228233000 0 None None Buildings Electrification Work 1676905.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3337723 117165 None Electrical SR I.No- 1.1.4 Open Conduit System -Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. --- 40 mm dia 2.5 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 156.45 156.45 4.0 False None None False None False 625.8 0 3337724 117165 None Electrical SR I.No- 1.2.1 Concealed Conduit System - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary -- 19/20 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 69.3 69.3 730.0 False None None False None False 50589.0 0 3337725 117165 None Electrical SR I.No- 1.2.2 Concealed Conduit System - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary -- 25 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 81.9 81.9 280.0 False None None False None False 22932.0 0 3337726 117165 None Electrical SR I.No- 1.3.1 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. --19/20 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 71.4 71.4 540.0 False None None False None False 38556.0 0 3337727 117165 None Electrical SR I.No- 1.3.2 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. -- 25 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 82.95 82.95 190.0 False None None False None False 15760.5 0 3337728 117165 None Electrical SR I.No- 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box -- 19/20 mm deep Junction box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 51.45 51.45 60.0 False None None False None False 3087.0 0 3337729 117165 None Electrical SR I.No- 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box -- 25 mm deep Junction box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 58.8 58.8 25.0 False None None False None False 1470.0 0 3337730 117165 None Electrical SR I.No- 1.6.2 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. -- 12" x 9" x 3" (300 x 228 x 76 mm) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 120.75 120.75 1.0 False None None False None False 120.75 0 3337731 117165 None Electrical SR I.No- 1.8.1 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. -- 20 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 29.4 29.4 16.0 False None None False None False 470.4 0 3337732 117165 None Electrical SR I.No- 1.8.2 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. -- 25 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 36.75 36.75 10.0 False None None False None False 367.5 0 3337733 117165 None Electrical SR I.No- 1.13 Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead No 122.85 122.85 14.0 False None None False None False 1719.9 0 3337734 117165 None Electrical SR I.No- 2.1.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. -- Short point upto 3Mtr from tapping point to out let via switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Point 299.25 299.25 34.0 False None None False None False 10174.5 0 3337735 117165 None Electrical SR I.No- 2.1.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. -- Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Point 413.7 413.7 42.0 False None None False None False 17375.4 0 3337736 117165 None Electrical SR I.No- 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. -- Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Point 582.75 582.75 18.0 False None None False None False 10489.5 0 3337737 117165 None Electrical SR I.No- 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -- 1.5 Sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 27.3 27.3 4000.0 False None None False None False 109200.0 0 3337738 117165 None Electrical SR I.No- 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -- 2.5 Sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 44.1 44.1 2820.0 False None None False None False 124362.0 0 3337739 117165 None Electrical SR I.No- 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -- 4 Sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 66.15 66.15 1320.0 False None None False None False 87318.0 0 3337740 117165 None Electrical SR I.No- 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 -- 6 Sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 96.6 96.6 160.0 False None None False None False 15456.0 0 3337741 117165 None Electrical SR I.No- 2.6.1 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. -- 3C x 2.5 Sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 122.85 122.85 20.0 False None None False None False 2457.0 0 3337742 117165 None Electrical SR I.No- 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -- 1-2 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 144.9 144.9 16.0 False None None False None False 2318.4 0 3337743 117165 None Electrical SR I.No- 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -- 3 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 166.95 166.95 34.0 False None None False None False 5676.3 0 3337744 117165 None Electrical SR I.No- 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -- 4-5 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 185.85 185.85 50.0 False None None False None False 9292.5 0 3337745 117165 None Electrical SR I.No- 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -- 8 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 274.05 274.05 35.0 False None None False None False 9591.75 0 3337746 117165 None Electrical SR I.No- 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -- 10-12 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 334.95 334.95 6.0 False None None False None False 2009.7 0 3337747 117165 None Electrical SR I.No- 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 1 to 2 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 143.85 143.85 16.0 False None None False None False 2301.6 0 3337748 117165 None Electrical SR I.No- 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 3 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 169.05 169.05 34.0 False None None False None False 5747.7 0 3337749 117165 None Electrical SR I.No- 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 4 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 183.75 183.75 50.0 False None None False None False 9187.5 0 3337750 117165 None Electrical SR I.No- 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 8 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 298.2 298.2 35.0 False None None False None False 10437.0 0 3337751 117165 None Electrical SR I.No- 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. -- 10-12 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 361.2 361.2 6.0 False None None False None False 2167.2 0 3337752 117165 None Electrical SR I.No- 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 6A One Way Switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 107.1 107.1 134.0 False None None False None False 14351.4 0 3337753 117165 None Electrical SR I.No- 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 6A Two Way Switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 174.3 174.3 7.0 False None None False None False 1220.1 0 3337754 117165 None Electrical SR I.No- 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 6A Three Way socket ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 179.55 179.55 40.0 False None None False None False 7182.0 0 3337755 117165 None Electrical SR I.No- 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- Stepped Fan Regulator Two Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 374.85 374.85 14.0 False None None False None False 5247.9 0 3337756 117165 None Electrical SR I.No- 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 16A One Way Switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 189.0 189.0 5.0 False None None False None False 945.0 0 3337757 117165 None Electrical SR I.No- 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 6A Bell Push ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 185.85 185.85 1.0 False None None False None False 185.85 0 3337758 117165 None Electrical SR I.No- 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 32A DP Switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 342.3 342.3 26.0 False None None False None False 8899.8 0 3337759 117165 None Electrical SR I.No- 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- 6/16A Universal Socket ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 247.8 247.8 26.0 False None None False None False 6442.8 0 3337760 117165 None Electrical SR I.No- 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- TV/Telephone Socket ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 163.8 163.8 1.0 False None None False None False 163.8 0 3337761 117165 None Electrical SR I.No- 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -- RJ45/I.O Outlet Cat-6 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 353.85 353.85 1.0 False None None False None False 353.85 0 3337762 117165 None Electrical SR I.No- 5.1 CONTROL SWITCH GEARS & ACCESSORIES - Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 5 HP. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 2023.35 2023.35 1.0 False None None False None False 2023.35 0 3337763 117165 None Electrical SR I.No- 5.7.4 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. -- 100 A ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 725.55 725.55 6.0 False None None False None False 4353.3 0 3337764 117165 None Electrical SR I.No- 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. -- 6-32 A DP ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 775.95 775.95 10.0 False None None False None False 7759.5 0 3337765 117165 None Electrical SR I.No- 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-- 40 A DP ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1113.0 1113.0 5.0 False None None False None False 5565.0 0 3337766 117165 None Electrical SR I.No- 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-- 6-32 A TPN ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1802.85 1802.85 2.0 False None None False None False 3605.7 0 3337767 117165 None Electrical SR I.No- 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-- 40 A TPN ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 3196.2 3196.2 1.0 False None None False None False 3196.2 0 3337768 117165 None Electrical SR I.No- 5.19.6 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II-Double Door -- 4 Way SP & N ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1600.2 1600.2 5.0 False None None False None False 8001.0 0 3337769 117165 None Electrical SR I.No- 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II-Double Door -- 12 Way SP & N ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 2445.45 2445.45 1.0 False None None False None False 2445.45 0 3337770 117165 None Electrical SR I.No- 5.19.11 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. III - Double Door -- 4 Way TP & N ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 4239.9 4239.9 1.0 False None None False None False 4239.9 0 3337771 117165 None Electrical SR I.No- 5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. -- 16A-25A 2 pole ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 4490.85 4490.85 5.0 False None None False None False 22454.25 0 3337772 117165 None Electrical SR I.No- 5.20.6 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. -- 16-25A 4 pole ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 5319.3 5319.3 1.0 False None None False None False 5319.3 0 3337773 117165 None Electrical SR I.No- 5.31 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 4609.5 4609.5 1.0 False None None False None False 4609.5 0 3337774 117165 None Electrical SR I.No- 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 540.75 540.75 3.0 False None None False None False 1622.25 0 3337775 117165 None Electrical SR I.No- 5.40.1 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete -- 100 A 4 x 30 x 6 mm Aluminium Strips ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 2588.25 2588.25 0.5 False None None False None False 1294.125 0 3337776 117165 None Electrical SR I.No- 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. -- 40 x 40 x 6 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 320.25 320.25 6.0 False None None False None False 1921.5 0 3337777 117165 None Electrical SR I.No- 5.42.1 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. -- 14 SWG ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Sq CM 0.53 0.53 12000.0 False None None False None False 6360.0 0 3337778 117165 None Electrical SR I.No- 6.1 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1566.6 1566.6 6.0 False None None False None False 9399.6 0 3337779 117165 None Electrical SR I.No- 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. -- 48" Sweep (1200 mm) Regular model ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 3133.2 3133.2 14.0 False None None False None False 43864.8 0 3337780 117165 None Electrical SR I.No- 6.7.3 Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit -- 2 Ton capacity ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 56750.4 56750.4 6.0 False None None False None False 340502.4 0 3337781 117165 None Electrical SR I.No- 7.2.1 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. - 5 Star With Fibre body -- 25 L ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 12525.45 12525.45 5.0 False None None False None False 62627.25 0 3337782 117165 None Electrical SR I.No- 7.3.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stainless steel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. SS Model with 100mm thick of 48Kg/M3density Rock wool insulation with 22SWG Aluminium cladding. -- 300 L ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 73485.3 73485.3 1.0 False None None False None False 73485.3 0 3337783 117165 None Electrical SR I.No- 8.3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 46.2 46.2 1.0 False None None False None False 46.2 0 3337784 117165 None Electrical SR I.No- 9.1.3 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. -- 5kVA Capacity ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 10149.3 10149.3 6.0 False None None False None False 60895.8 0 3337785 117165 None Electrical SR I.No- 9.3.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. -- 5 kVA ON LINE UPS ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 71802.15 71802.15 1.0 False None None False None False 71802.15 0 3337786 117165 None Electrical SR I.No- 9.5.8 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. -- 120 AH capacity ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 16289.7 16289.7 5.0 False None None False None False 81448.5 0 3337787 117165 None Electrical SR I.No- 11.3.3 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. -- LED light fitting 1 x 4' - 36/40 W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1332.45 1332.45 27.0 False None None False None False 35976.15 0 3337788 117165 None Electrical SR I.No- 11.6.2 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI Greater than 70%. efficacy Greater than 100 lumen per W, 120degree beam spread, life Greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF Greater than 0.95, power loss should Lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. -- LED modular down light 1'x1' 24W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 3876.6 3876.6 8.0 False None None False None False 31012.8 0 3337789 117165 None Electrical SR I.No- 11.7. 3 Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT Greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire Greater than IK08. Power Factor Greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency Greater than 1301m/w, nominal CRI Greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & -- LED Post Top Lantern with 35/40 W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 10103.1 10103.1 2.0 False None None False None False 20206.2 0 3337790 117165 None Electrical SR I.No- 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire Greater than IK08. Power Factor Greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency Greater than 1301m/w, nominal CRI Greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. -- LED Streetlight 70W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 6291.6 6291.6 5.0 False None None False None False 31458.0 0 3337791 117165 None Electrical SR I.No- 11.11.7 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI Greater than 70%. efficacy Greater than 80 lumen per W, life Greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF Greater than 0.95, power loss should Lesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. -- 18W, 6500K ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 447.3 447.3 21.0 False None None False None False 9393.3 0 3337792 117165 None Electrical SR I.No- 11.15 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 884.1 884.1 4.0 False None None False None False 3536.4 0 3337793 117165 None Electrical SR I.No- 12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. -- Ding Dong Bell ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 258.3 258.3 1.0 False None None False None False 258.3 0 3337794 117165 None Electrical SR I.No- 12.2.3 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. -- Remote ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1249.5 1249.5 1.0 False None None False None False 1249.5 0 3337795 117165 None Electrical SR I.No- 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead No 3685.5 3685.5 6.0 False None None False None False 22113.0 0 3337796 117165 None Electrical SR I.No- 12.60.1 Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm -- Using 4ft. Copper bonded rod with backfill compound ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead 1 Kit 4754.4 4754.4 1.0 False None None False None False 4754.4 0 3337797 117165 None Electrical SR I.No- 13.1.2 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. -- Using 32mm dia G.I.Pipe ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 1097.25 1097.25 5.0 False None None False None False 5486.25 0 3337798 117165 None Electrical SR I.No- 13.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 207.9 207.9 2.0 False None None False None False 415.8 0 3337799 117165 None Electrical SR I.No- 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. -- On wall/ ceiling / Rafter / Girders ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 128.1 128.1 35.0 False None None False None False 4483.5 0 3337800 117165 None Electrical SR I.No- 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 179.55 179.55 14.0 False None None False None False 2513.7 0 3337801 117165 None Electrical SR I.No- 13.12 Extra length of GI pipe of class B 19mm dia for down rod. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 206.85 206.85 14.0 False None None False None False 2895.9 0 3337802 117165 None Electrical SR I.No- 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 516.6 516.6 6.0 False None None False None False 3099.6 0 3337803 117165 None Electrical SR I.No- 13.15.1 Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top. -- upto 30 Litres ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 697.2 697.2 5.0 False None None False None False 3486.0 0 3337804 117165 None Electrical SR I.No- 3.10.3 Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. -- 110 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead No 22.05 22.05 55.0 False None None False None False 1212.75 0 3337805 117165 None Electrical SR I.No- 13.6.1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments -- 7 STG ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Each 13983.9 13983.9 1.0 False None None False None False 13983.9 0 3337806 117165 None Electrical SR I.No- 32.05 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 -- 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Km 161765.1 161765.1 0.1 False None None False None False 16176.51 0 3337807 117165 None Electrical SR I.No- 32.01 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 -- 6 Sqmm, 2 Core, (24 GI Wire - 1.4 mm) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead Km 66576.3 66576.3 0.06 False None None False None False 3994.578 0 3337808 117165 None Electrical SR I.No- 8.02 Guy Wire & GI Wire as per IS-214 -- G GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead MT 78792.0 78792.0 0.05 False None None False None False 3939.6 0 3337809 117165 None Electrical SR I.No- 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.(KPWD SR-Volume-1 I.No 16 Pg No 06) -- In all kinds of soils. Depth upto 1.50m ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead m 508.2 508.2 20.0 False None None False None False 10164.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719228233000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719228233000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government /Government of India -Union Territory None 1719228233000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719228233000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1719228233000 1 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719228233000 2 None None ELIGIBILITY The tenderer should be a KPWD registered Class-3 and above Contractor and also Contractors should have Registration of GST Employers Provident Fund and Tenderer should submit Registration Certificate along with Technical bid None 1719228233000 1 None None ELIGIBILITY As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should Follow strictly prevailing rules of labour act None 1719228233000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1719228233000 1 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work. None 1719228233000 1 None None ELIGIBILITY The bidder shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPP portal. None 1719228233000 1 None None ELIGIBILITY Only Original documents to be scanned and uploaded, Executive Engineer reserves the right verify the Original Documents before approval, original documents/Certificate for qualification shall be produced when called for during evaluation of tender. None 1719228233000 0 None None ELIGIBILITY All the Formats prescribed in the bid documents shall be filled in complete manner. None 1719228233000 1 None None ELIGIBILITY The Tenderer should maintain the Work during defective liability period of 1year. None 1719228233000 1 None None ELIGIBILITY Tender shall obtain the work done Certificate in the prescribed format from the Competent Authority no below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Tender. The Original Certificate shall be produced at the time of Opening of Technical Bids for Physical Verification, If sought. None 1719228233000 1 None None ELIGIBILITY As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount seperately. And Increase in GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1719228233000 1 None None ELIGIBILITY Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to Tender) amount is kept in form of Lump sum in sanctioned estimate accroding to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Seperately at stage of Draft Tender Schedule Process for Over ALL amount put to tender, tender has been inviting through an Option with INCLUSIVE. but the item wise rates do not include GST. Hence, GST will be paid seperately for the quoted amount accrodingly. Declaration Certificate must be attached mandatorily. None 1719228233000 1 None None ELIGIBILITY The employer reserves the rights to Reject one or all Tenders without assigning any reason None 1719228233000 1 None None ELIGIBILITY In case if the death of a Contractor, after executing the agreement/Commencement of the work, his legal heir is an eligible registered Contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work. None 1719228233000 1 None None ELIGIBILITY PERFORMANCE SECURITY-The successful Tenderer shall furnish Performance Security Deposite( Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of FDR/Bank Guarantee duly pledged in the nature of EXECUTIVE ENGINEER, PWD SPECIAL DIVISION, Shimoga. None 1719228233000 1 None None ELIGIBILITY All Safety precautions, warning sings, night illumination, reflectors, development of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity Contractor should indemnify the Client to that extent. None 1719228233000 1 None None ELIGIBILITY Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of Quantities. None 1719228233000 1 None None ELIGIBILITY Contractors has to upload the EPF Registration with MAY 2024 Challan copy. Contractor has to submit their Labour EPF details with every Running Bill. None 1719228761000 0 None None ELIGIBILITY THE CONTRACTOR SHALL SUBMIT THE DETAILS OF TECHNICAL STAFF EMPLOYED BY HIM. None 1719228769000 0 None None ELIGIBILITY THE WORK COMPLETION PERIOD IS 11 MONTHS ( INCLUDING MONSOON) None 1719228779000 0 None None ELIGIBILITY BIDDER SHOULD ESTABLISH A FIELD LABORATORY None 1719228808000 0 None None ELIGIBILITY Contractor must have 2 graduate engineers and also engineers must worked with firm atleast 5 years Supervision. Certificate should be enclosed. None 1719228819000 0 None None ELIGIBILITY The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got attested by the Quality Control Authority before use on the work. None 1719228848000 0 None None ELIGIBILITY The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labour, hire charges of machinery equipments etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work. None 1719229038000 0 None None ELIGIBILITY EMD FOR RS. 1,00,000/- SHALL BE PAID THROUGH KARNATAKA PUBLIC PROCUREMENT PORTAL (KPPP) AND THE BALANCE OF RS.1,95,500/- BY BANK GUARANTEE ISSUED BY NATIONALISED/SCHEDULED BANK. CONTRACTOR SHOULD UPLOAD THE SCANNED COPY OF ORIGINAL BANK GUARANTEE ISSUED BY NATIONALISED/SCHEDULED BANK IN KPPP. THE CONTRACTOR HAS TO SUBMIT THE ORIGINAL BANK GUARANTEE BEFORE ENTERING THE AGREEMENT, IF AWARDED None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None Banker Details for reference None None None None None None The Tenderer should have executed in any one year (in the last five years) the following minimum quantities of work 1.Earthwork excavation and embankment -1267 cum2. PCC/RCC -346 Cum3. TMT Steel- 25 M Tonne. 4. SSM/BBM -303 Cum5. Plastering- 2206 Sqm 6.Flooring Tiles -547 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer. None None None None To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20, 2020-21, 2021-22 ,2022-23 & 2023-24 satisfactorily completed as prime contractor, at least one similar nature of Construction of Buildings work of value not less than 98.42 lakhs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24(a) achieved in at least two financial years a minimum financial turnover of Rs. 393.71 Lakhs, (in all classes of Civil Engineering Construction works only) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Statement indicating the (A)Existig commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- details work listed in the Statement should be counter signed by the EE or Equivalent officer None None None None Each tenderer should further demonstrate: liquid assets and / or availability of Credit facilities of not less than Rs. 59.05 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e, 2019-20, 2020-21, 2021-22 ,2022-23 & 2023-24 Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The Tender should be a KPWD Registered Class-III and above contractor. Others Registration createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Registration Certificate True Technical Bid Similar nature of work True Technical Bid GST Declaration form True Technical Bid EPF Registration Certificate with May 2024 challan copy True Technical Bid liquid assets and or availability of Credit facilities of not less than Rs. 59.05 Lakhs in prescribed format in kw4lines / letter of credit / certificates from banks for meeting the fund requirement etc True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719552912000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer, PWD, Special Division, Shimoga balrajurs road street None city Shivamogga state Karnataka pin 577201
tenderRecallDTO	None