| 1719566516000 | 0 | None | None | Buildings | Construction of Class room at Govt Higher Primary school (Upgraded High school) in Parvati village of Guledagudda Taluk Bagalkote District Work under Schome of RIDF NABARD-28 | 13289545.22 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3398102 | 119814 | None | AEEBDM001 | GROUND FLOOR Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3m. (PWD SR V-1, 2023-24, Item No-1.14.1, Page No-8) | Cum | 102.0 | 102.0 | 948.58 | False | None | None | False | None | False | 96755.16 | 0 | | 3398103 | 119814 | None | AEEBDM002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates. (PWD SR V-1, 2023-24, Item No-2.1.3, Page No-15) | Cum | 5989.0 | 5989.0 | 114.89 | False | None | None | False | None | False | 688076.21 | 0 | | 3398104 | 119814 | None | AEEBDM003 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD SR V-1,2023-24, Item No-2.2.1, Page No-15) Add shuttering @8% | Cum | 6789.96 | 6789.96 | 75.69 | False | None | None | False | None | False | 513932.0724 | 0 | | 3398105 | 119814 | None | AEEBDM004 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR V1 2023 24, Item No-2.4.2, Page No-16)(Columns from Footing to GL) | Cum | 10749.1 | 10749.1 | 12.88 | False | None | None | False | None | False | 138448.408 | 0 | | 3398106 | 119814 | None | AEEBDM005 | Ground Level beam and Plinth Level Beam | Cum | 9484.5 | 9484.5 | 26.27 | False | None | None | False | None | False | 249157.815 | 0 | | 3398107 | 119814 | None | AEEBDM006 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (PWD SR V-1, 2023-24, Item No-2.5.1, Page No-16) Columns from Footing to GF | Cum | 11271.0 | 11271.0 | 12.69 | False | None | None | False | None | False | 143028.99 | 0 | | 3398108 | 119814 | None | AEEBDM007 | RCC Lintel and Floor slab level beam | Cum | 10608.0 | 10608.0 | 16.87 | False | None | None | False | None | False | 178956.96 | 0 | | 3398109 | 119814 | None | AEEBDM008 | Floor slab | Cum | 9945.0 | 9945.0 | 47.17 | False | None | None | False | None | False | 469105.65 | 0 | | 3398110 | 119814 | None | AEEBDM009 | Staircase | Cum | 9945.0 | 9945.0 | 2.68 | False | None | None | False | None | False | 26652.6 | 0 | | 3398111 | 119814 | None | AEEBDM010 | Window Chajja | Cum | 9613.5 | 9613.5 | 0.12 | False | None | None | False | None | False | 1153.62 | 0 | | 3398112 | 119814 | None | AEEBDM011 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations
and other similar works etc. in layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming and watering, lead up to 50 m and lift upto
1.5 m. (PWD SR V-1, 2023-24, Item No-1.11, Page No-7) | Cum | 433.0 | 433.0 | 1131.23 | False | None | None | False | None | False | 489822.59 | 0 | | 3398113 | 119814 | None | AEEBDM012 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (PWD SR V-1, 2023-24, Item No-2.11.a, Page No-18) | Tonne | 89457.0 | 89457.0 | 15.656 | False | None | None | False | None | False | 1400538.792 | 0 | | 3398114 | 119814 | None | AEEBDM013 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
(PWD SR V-2, 2023-24, Item No-6.3, Page No-13) | Cum | 8874.0 | 8874.0 | 63.85 | False | None | None | False | None | False | 566604.9 | 0 | | 3398115 | 119814 | None | AEEBDM014 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR V-2, 2021-22, Item No-6.8, Page No-14) | Cum | 7969.0 | 7969.0 | 124.16 | False | None | None | False | None | False | 989431.04 | 0 | | 3398116 | 119814 | None | AEEBDM015 | Providing and fixing M.S. grills of required pattern in frames ofdows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR V-2 2023-24, Item No-11.34B, Page No-86) | Kg | 183.0 | 183.0 | 733.32 | False | None | None | False | None | False | 134197.56 | 0 | | 3398117 | 119814 | None | AEEBDM016 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(PWD SR V-2, 2023-24, Item No-11.26.1, Page No-84) | Kg | 138.0 | 138.0 | 810.75 | False | None | None | False | None | False | 111883.5 | 0 | | 3398118 | 119814 | None | AEEBDM017 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR V-2, 2023-24, Item No-12.86, Page No-109) | Sqm | 5930.0 | 5930.0 | 34.92 | False | None | None | False | None | False | 207075.6 | 0 | | 3398119 | 119814 | None | AEEBDM018 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications (PWD SR V-2, 20213-24, Item No-12.12, Page No-99) | Cum | 124202.0 | 124202.0 | 1.36 | False | None | None | False | None | False | 168914.72 | 0 | | 3398120 | 119814 | None | AEEBDM019 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications (PWD SR V-2, 20213-24, Item No-12.12, Page No-99) | Sqm | 6897.0 | 6897.0 | 29.61 | False | None | None | False | None | False | 204220.17 | 0 | | 3398121 | 119814 | None | AEEBDM020 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm (I No.12.73.1; Page No.107; PWD SR V-2, 2023-24) | Nos | 44.0 | 44.0 | 26.0 | False | None | None | False | None | False | 1144.0 | 0 | | 3398122 | 119814 | None | AEEBDM021 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (I No.12.72; Page No.107; PWD SR V-2, 2023-24) | Nos | 82.0 | 82.0 | 26.0 | False | None | None | False | None | False | 2132.0 | 0 | | 3398123 | 119814 | None | AEEBDM022 | Providing and fixing chromium plated brass 100 mm mortice latch andlock with 6 levers and a pair of lever handles of approved quality withnecessary screws etc. complete. (PWD SR V-2, 2023-24, Item No-12.60, Page No-105) | Nos | 1052.0 | 1052.0 | 26.0 | False | None | None | False | None | False | 27352.0 | 0 | | 3398124 | 119814 | None | AEEBDM023 | Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete 125x64x1.90mm (PWD SR V-2, 2023-24, Item No-12.74.1, Page No-107) | Nos | 102.0 | 102.0 | 39.0 | False | None | None | False | None | False | 3978.0 | 0 | | 3398125 | 119814 | None | AEEBDM024 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(PWD SR V-2, 2023-24, Item No-8.3.2, Page No-41) | Sqm | 333.0 | 333.0 | 1220.34 | False | None | None | False | None | False | 406373.22 | 0 | | 3398126 | 119814 | None | AEEBDM025 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(PWD SR V-2, 2023-24, Item No-8.33.2, Page No-46) | Sqm | 138.0 | 138.0 | 74.03 | False | None | None | False | None | False | 10216.14 | 0 | | 3398127 | 119814 | None | AEEBDM026 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.40, Page No-48) | Sqm | 115.0 | 115.0 | 117.32 | False | None | None | False | None | False | 13491.8 | 0 | | 3398128 | 119814 | None | AEEBDM027 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR V-2, 2023-24, Item No-8.51, Page No-50) | Sqm | 100.0 | 100.0 | 882.84 | False | None | None | False | None | False | 88284.0 | 0 | | 3398129 | 119814 | None | AEEBDM028 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR V-2, 2023-24, Item No-8.25, Page No-45) | Sqm | 137.0 | 137.0 | 882.84 | False | None | None | False | None | False | 120949.08 | 0 | | 3398130 | 119814 | None | AEEBDM029 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.27, Page No-45) | Sqm | 53.0 | 53.0 | 400.23 | False | None | None | False | None | False | 21212.19 | 0 | | 3398131 | 119814 | None | AEEBDM030 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.28, Page No-45) | Sqm | 89.0 | 89.0 | 400.23 | False | None | None | False | None | False | 35620.47 | 0 | | 3398132 | 119814 | None | AEEBDM031 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.(PWD SR V-2, 2023-24, Item No-9.36, Page No-64) | Sqm | 1650.0 | 1650.0 | 464.66 | False | None | None | False | None | False | 766689.0 | 0 | | 3398133 | 119814 | None | AEEBDM032 | Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (PWD SR ELE-Part 1, 2023-24, Item No-1.2.1, Page No-2) | Mtr | 66.0 | 66.0 | 290.0 | False | None | None | False | None | False | 19140.0 | 0 | | 3398134 | 119814 | None | AEEBDM033 | Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (PWD SR ELE-Part 1,2023-24, Item No-1.3.1, Page No-2) | Mtr | 68.0 | 68.0 | 320.0 | False | None | None | False | None | False | 21760.0 | 0 | | 3398135 | 119814 | None | AEEBDM034 | Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. (PWD SR ELE-Part 1, 2023-24, Item No-5.16.1, Page No-17) | Each | 10329.0 | 10329.0 | 3.0 | False | None | None | False | None | False | 30987.0 | 0 | | 3398136 | 119814 | None | AEEBDM035 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.. (PWD SR ELE-Part 1, 2023-24, Item No-5.17.1, Page No-13) | Each | 415.0 | 415.0 | 12.0 | False | None | None | False | None | False | 4980.0 | 0 | | 3398137 | 119814 | None | AEEBDM036 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.1, Page No-5) | Point | 285.0 | 285.0 | 35.0 | False | None | None | False | None | False | 9975.0 | 0 | | 3398138 | 119814 | None | AEEBDM037 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.2, Page No-5) | Point | 570.0 | 570.0 | 18.0 | False | None | None | False | None | False | 10260.0 | 0 | | 3398139 | 119814 | None | AEEBDM038 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.3, Page No-5) | Point | 394.0 | 394.0 | 28.0 | False | None | None | False | None | False | 11032.0 | 0 | | 3398140 | 119814 | None | AEEBDM039 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Way (PWD SR ELE-Part 1, 2023-24, Item No-3.4.6, Page No-8) | Each | 319.0 | 319.0 | 8.0 | False | None | None | False | None | False | 2552.0 | 0 | | 3398141 | 119814 | None | AEEBDM040 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16-18 Way (PWD SR ELE-Part 1, 2023-24, Item No-3.5.6, Page No-8) | Each | 344.0 | 344.0 | 8.0 | False | None | None | False | None | False | 2752.0 | 0 | | 3398142 | 119814 | None | AEEBDM041 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.1 Page No-9) | Each | 102.0 | 102.0 | 81.0 | False | None | None | False | None | False | 8262.0 | 0 | | 3398143 | 119814 | None | AEEBDM042 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.3 Page No-9) | Each | 171.0 | 171.0 | 24.0 | False | None | None | False | None | False | 4104.0 | 0 | | 3398144 | 119814 | None | AEEBDM043 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.4 Page No-9) | Each | 357.0 | 357.0 | 5.0 | False | None | None | False | None | False | 1785.0 | 0 | | 3398145 | 119814 | None | AEEBDM044 | Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder(PWD SR ELE-Part 1, 2023-24, Item No-12.45, Page No-52) | Each | 33.0 | 33.0 | 20.0 | False | None | None | False | None | False | 660.0 | 0 | | 3398146 | 119814 | None | AEEBDM045 | Supplying of .....feet -PVC Batten with integrated LED tube 20W with high quality diffuser with Life of 25000 burnin hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 4' - 20/22 W (PWD SR ELE-Part 1, 2023-24, Item No-11.3.2, Page No-43) | Each | 690.0 | 690.0 | 10.0 | False | None | None | False | None | False | 6900.0 | 0 | | 3398147 | 119814 | None | AEEBDM046 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopiesetc, for operation on 230V, 50cycles. Single phase Acs upply conforming to ISS-374-1979 and with double ball bearing system. 56" Sweep (1400 mm) Regular model (PWD SR ELE-Part 1, 2023-24, Item No-6.3.2, Page No-30) | Each | 3031.0 | 3031.0 | 5.0 | False | None | None | False | None | False | 15155.0 | 0 | | 3398148 | 119814 | None | AEEBDM047 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of apx0002proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the irection of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile(PWD SR V-2 2023-24, Item No-9.7.1, Page No-59) | Sqm | 1246.0 | 1246.0 | 24.0 | False | None | None | False | None | False | 29904.0 | 0 | | 3398149 | 119814 | None | AEEBDM048 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of apx0002proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the irection of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement 1: 4 coarse sand) with Acid and alkali resistant tile.(PWD SR V-2, 2023-24, Item No-9.7.2, Page No-60) | Sqm | 1260.0 | 1260.0 | 95.13 | False | None | None | False | None | False | 119863.8 | 0 | | 3398150 | 119814 | None | AEEBDM049 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (PWD SR V-2, 2023-24, Item No-9.36, Page No-64) | Sqm | 1650.0 | 1650.0 | 14.4 | False | None | None | False | None | False | 23760.0 | 0 | | 3398151 | 119814 | None | AEEBDM050 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Long pattern W.C Pan of size 580x440 mm (PWD SR V-2, 2023-24, Item No-20.44.1, Page No-202) | Nos | 2791.0 | 2791.0 | 3.0 | False | None | None | False | None | False | 8373.0 | 0 | | 3398152 | 119814 | None | AEEBDM051 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (PWD SR V-2, 2023-24, Item No-14.5.1, Page No-132) | Nos | 8642.0 | 8642.0 | 3.0 | False | None | None | False | None | False | 25926.0 | 0 | | 3398153 | 119814 | None | AEEBDM052 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps (PWD SR V-2, 2023-24, Item No-14.7.1, Page No-124) | Nos | 3082.0 | 3082.0 | 3.0 | False | None | None | False | None | False | 9246.0 | 0 | | 3398154 | 119814 | None | AEEBDM053 | Providing and fixing brass bib cock of approved quality :20 mm nominal bore (PWD SR V-2, 2023-24, Item No-13.2.2, Page No-124) | Nos | 305.0 | 305.0 | 10.0 | False | None | None | False | None | False | 3050.0 | 0 | | 3398155 | 119814 | None | AEEBDM054 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).12.5x7.5cm(PWD SR-2018-19, P.NO- 92, I.NO- 12.113.2) | Nos | 285.0 | 285.0 | 8.0 | False | None | None | False | None | False | 2280.0 | 0 | | 3398156 | 119814 | None | AEEBDM055 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 50mm dia,6kg/sqcm & class 5 (PWD SR , 2021-22,SOR Code-M010C,Page No-134) | Mtr | 96.0 | 96.0 | 175.0 | False | None | None | False | None | False | 16800.0 | 0 | | 3398157 | 119814 | None | AEEBDM056 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for:Pipes of SN4, 110mm dia. (PWD SR , 2021-22,SOR Code-M020B,Page No-134) | Mtr | 271.0 | 271.0 | 175.0 | False | None | None | False | None | False | 47425.0 | 0 | | 3398158 | 119814 | None | AEEBDM057 | KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements,making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22(PWD SR-2018-19, P.NO- 94, I.NO- 13.78) | Each | 6828.0 | 6828.0 | 2.0 | False | None | None | False | None | False | 13656.0 | 0 | | 3398159 | 119814 | None | AEEBDM058 | FIRST FLOOR Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) (PWD SR V-1, 2023-24, Item No-2.5.1, Page No-16) Columns from GF Slab to FF Slab | Cum | 11383.71 | 11383.71 | 15.33 | False | None | None | False | None | False | 174512.2743 | 0 | | 3398160 | 119814 | None | AEEBDM059 | RCC Lintel andFloor slab level beam | Cum | 10714.08 | 10714.08 | 16.6 | False | None | None | False | None | False | 177853.728 | 0 | | 3398161 | 119814 | None | AEEBDM060 | Floor slab | Cum | 10044.45 | 10044.45 | 49.61 | False | None | None | False | None | False | 498305.1645 | 0 | | 3398162 | 119814 | None | AEEBDM061 | Staircase | Cum | 10044.45 | 10044.45 | 2.68 | False | None | None | False | None | False | 26919.126 | 0 | | 3398163 | 119814 | None | AEEBDM062 | Window Chajja | Cum | 9709.64 | 9709.64 | 0.12 | False | None | None | False | None | False | 1165.1568 | 0 | | 3398164 | 119814 | None | AEEBDM063 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (PWD SR V-1, 2023-24, Item No-2.11.a, Page No-18) | Tonne | 90351.57 | 90351.57 | 8.9 | False | None | None | False | None | False | 804128.973 | 0 | | 3398165 | 119814 | None | AEEBDM064 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR V-2, 2021-22, Item No-6.8, Page No-14) | Cum | 8048.69 | 8048.69 | 144.7 | False | None | None | False | None | False | 1164645.443 | 0 | | 3398166 | 119814 | None | AEEBDM065 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications
(PWD SR V-2, 20213-24, Item No-12.12, Page No-99) | Cum | 125444.02 | 125444.02 | 0.8 | False | None | None | False | None | False | 100355.216 | 0 | | 3398167 | 119814 | None | AEEBDM066 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)
(PWD SR V-2, 2023-24, Item No-12.15, Page No-100) | Sqm | 6965.97 | 6965.97 | 20.16 | False | None | None | False | None | False | 140433.9552 | 0 | | 3398168 | 119814 | None | AEEBDM067 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm (I No.12.73.1; Page No.107; PWD SR V-2, 2023-24) | Nos | 44.44 | 44.44 | 14.0 | False | None | None | False | None | False | 622.16 | 0 | | 3398169 | 119814 | None | AEEBDM068 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (I No.12.72; Page No.107; PWD SR V-2, 2023-24) | Nos | 82.82 | 82.82 | 14.0 | False | None | None | False | None | False | 1159.48 | 0 | | 3398170 | 119814 | None | AEEBDM069 | Providing and fixing chromium plated brass 100 mm mortice latch andlock with 6 levers and a pair of lever handles of approved quality withnecessary screws etc. complete. (PWD SR V-2, 2023-24, Item No-12.60, Page No-105) | Nos | 1062.52 | 1062.52 | 14.0 | False | None | None | False | None | False | 14875.28 | 0 | | 3398171 | 119814 | None | AEEBDM070 | Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete 125x64x1.90mm (PWD SR V-2, 2023-24, Item No-12.74.1, Page No-107) | Nos | 103.02 | 103.02 | 21.0 | False | None | None | False | None | False | 2163.42 | 0 | | 3398172 | 119814 | None | AEEBDM071 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(PWD SR V-2, 2023-24, Item No-8.3.2, Page No-41) | Sqm | 336.33 | 336.33 | 1149.75 | False | None | None | False | None | False | 386695.4175 | 0 | | 3398173 | 119814 | None | AEEBDM072 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.33.2, Page No-46) | Sqm | 139.38 | 139.38 | 50.4 | False | None | None | False | None | False | 7024.752 | 0 | | 3398174 | 119814 | None | AEEBDM073 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR V-2, 2023-24, Item No-8.51, Page No-50) | Sqm | 101.0 | 101.0 | 659.76 | False | None | None | False | None | False | 66635.76 | 0 | | 3398175 | 119814 | None | AEEBDM074 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR V-2, 2023-24, Item No-8.25, Page No-45) | Sqm | 138.37 | 138.37 | 659.76 | False | None | None | False | None | False | 91290.9912 | 0 | | 3398176 | 119814 | None | AEEBDM075 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.27, Page No-45) | Sqm | 53.53 | 53.53 | 569.91 | False | None | None | False | None | False | 30507.2823 | 0 | | 3398177 | 119814 | None | AEEBDM076 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR V-2, 2023-24, Item No-8.28, Page No-45) | Sqm | 89.89 | 89.89 | 569.91 | False | None | None | False | None | False | 51229.2099 | 0 | | 3398178 | 119814 | None | AEEBDM077 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.(PWD SR V-2, 2023-24, Item No-9.36, Page No-64) | Sqm | 1666.5 | 1666.5 | 429.69 | False | None | None | False | None | False | 716078.385 | 0 | | 3398179 | 119814 | None | AEEBDM078 | Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (PWD SR ELE-Part 1, 2023-24, Item No-1.2.1, Page No-2) | Mtr | 66.66 | 66.66 | 310.0 | False | None | None | False | None | False | 20664.6 | 0 | | 3398180 | 119814 | None | AEEBDM079 | Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (PWD SR ELE-Part 1,2023-24, Item No-1.3.1, Page No-2) | Mtr | 68.68 | 68.68 | 350.0 | False | None | None | False | None | False | 24038.0 | 0 | | 3398181 | 119814 | None | AEEBDM080 | Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. (PWD SR ELE-Part 1, 2023-24, Item No-5.16.1, Page No-17) | Nos | 10432.29 | 10432.29 | 4.0 | False | None | None | False | None | False | 41729.16 | 0 | | 3398182 | 119814 | None | AEEBDM081 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.. (PWD SR ELE-Part 1, 2023-24, Item No-5.17.1, Page No-13) | Nos | 419.15 | 419.15 | 5.0 | False | None | None | False | None | False | 2095.75 | 0 | | 3398183 | 119814 | None | AEEBDM082 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.1, Page No-5) | Nos | 287.85 | 287.85 | 8.0 | False | None | None | False | None | False | 2302.8 | 0 | | 3398184 | 119814 | None | AEEBDM083 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.2, Page No-5) | Nos | 575.7 | 575.7 | 4.0 | False | None | None | False | None | False | 2302.8 | 0 | | 3398185 | 119814 | None | AEEBDM084 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch (PWD SR ELE-Part 1, 2023-24, Item No-2.1.3, Page No-5) | Nos | 397.94 | 397.94 | 3.0 | False | None | None | False | None | False | 1193.82 | 0 | | 3398186 | 119814 | None | AEEBDM085 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Way (PWD SR ELE-Part 1, 2023-24, Item No-3.4.6, Page No-8) | Nos | 322.19 | 322.19 | 2.0 | False | None | None | False | None | False | 644.38 | 0 | | 3398187 | 119814 | None | AEEBDM086 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16-18 Way (PWD SR ELE-Part 1, 2023-24, Item No-3.5.6, Page No-8) | Nos | 347.44 | 347.44 | 2.0 | False | None | None | False | None | False | 694.88 | 0 | | 3398188 | 119814 | None | AEEBDM087 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.1 Page No-9) | Nos | 103.02 | 103.02 | 16.0 | False | None | None | False | None | False | 1648.32 | 0 | | 3398189 | 119814 | None | AEEBDM088 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.3 Page No-9) | Nos | 172.71 | 172.71 | 6.0 | False | None | None | False | None | False | 1036.26 | 0 | | 3398190 | 119814 | None | AEEBDM089 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD SR ELE-Part 1, 2023-24, Item No-3.6.4 Page No-9) | Nos | 360.57 | 360.57 | 1.0 | False | None | None | False | None | False | 360.57 | 0 | | 3398191 | 119814 | None | AEEBDM090 | Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder(PWD SR ELE-Part 1, 2023-24, Item No-12.45, Page No-52) | Nos | 33.33 | 33.33 | 1.0 | False | None | None | False | None | False | 33.33 | 0 | | 3398192 | 119814 | None | AEEBDM091 | Supplying of .....feet PVC Batten with integrated LED tube 20W with high quality diffuser with Life of 25000 burnin hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' 20/22 W (PWD SR ELE-Part 1, 2023-24, Item No-11.3.2, Page No-43) | Nos | 696.9 | 696.9 | 3.0 | False | None | None | False | None | False | 2090.7 | 0 | | 3398193 | 119814 | None | AEEBDM092 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopiesetc, for operation on 230V, 50cycles. Single phase Acs upply conforming to ISS-374-1979 and with double ball bearing system. 56" Sweep (1400 mm) Regular model (PWD SR ELE-Part 1, 2023-24, Item No-6.3.2, Page No-30) | Nos | 3061.31 | 3061.31 | 2.0 | False | None | None | False | None | False | 6122.62 | 0 |
|