createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719841727328 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 7500.00 emd 1500200.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 30-07-2024 16:00:00 tenderQueryClose 25-07-2024 13:30:00 technicalBidOpen 02-08-2024 11:00:00 publishedDate 01-07-2024 19:39:57 publishedByPost KLBUDA_COM_HOD publishedByUser KPE20214 - GANGADHAR S MALAGI bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 23-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Dileep Jadhav splitEmdRequiredYn True emdBankGuarantee 1400200.00 emdCash 100000.00 bgValidityPeriod 240 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9449172530 tenderSupplierList None
tenderSchedule	createdTs 1719841727363 version 4 createdDate None modifiedDate None tenderNumber KLBUDA/2024-25/EL/WORK_INDENT10 title Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. description Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. category WORKS categoryText Works ecv 150011194.49 deptName Kalaburagi Urban Development Authority status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1755 locationName KLBUDA Commissioner Office Kalaburagi provisionalAmount 153082000.0 groupOverheadTotal 22883064.0 fileNumber KUDA/DB/ABVP/SS/2024-25/891
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719841727000 0 None None Electrical Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. (PART A STATION WORK) 71406851.13 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3429862 121537 None code01 POWER TRANSFROMER: Supply of material cost: Power Transformer 10 MVA,110/11 kV Delta / Star, Dyn11, 3 Ph, 50 Hz, Core type winding with OLTC, RTCC panel, etc., complete filled with Transil oil with 10% spare oil with Terminal connectors suitable for Drake ACSR on 110 kV side and Drake ACSR/2 nos of 50 x 8 mm copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 nos of 50mm x8mm copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators.(Tesla Make PTR weight -40.975MT & oil -15850ltrs) No. 11719092.0 11719092.0 2.0 False None None False None False 23438184.0 0 3429863 121537 None code02 Errection charges : Power Transformer 10 MVA,110/11 kV Delta / Star, Dyn11, 3 Ph, 50 Hz, Core type winding with OLTC, RTCC panel, etc., complete filled with Transil oil with 10% spare oil with Terminal connectors suitable for Drake ACSR on 110 kV side and Drake ACSR/2 nos of 50 x 8 mm copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 nos of 50mm x8mm copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators.(Tesla Make PTR weight -40.975MT & oil -15850ltrs) No. 337381.43 337381.43 2.0 False None None False None False 674762.86 0 3429864 121537 None code03 Testing and Commissioning charges :Power Transformer 10 MVA,110/11 kV Delta / Star, Dyn11, 3 Ph, 50 Hz, Core type winding with OLTC, RTCC panel, etc., complete filled with Transil oil with 10% spare oil with Terminal connectors suitable for Drake ACSR on 110 kV side and Drake ACSR/2 nos of 50 x 8 mm copper flat for each phase from LV side of Transformer to cable at 11 kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 nos of 50mm x8mm copper flats from neutral terminal to earthmat through NCT along with necessary support pin insulators.(Tesla Make PTR weight -40.975MT & oil -15850ltrs) No. 50596.35 50596.35 2.0 False None None False None False 101192.7 0 3429865 121537 None code04 Nitrogen injection fire extinguishing system including civil Ewngineering works, soak pit etc. as per the recommendation of the supllier of the fire lighitng system for 110KV 10 MVA and above power transformer No. 1198716.75 1198716.75 2.0 False None None False None False 2397433.5 0 3429866 121537 None code05 CIRCUIT BREAKER: Material cost : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structure for 110/11 kV Transformer No. 738160.5 738160.5 2.0 False None None False None False 1476321.0 0 3429867 121537 None code06 Errection charges : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structure.for 110/11 kV Transformer No. 11355.75 11355.75 2.0 False None None False None False 22711.5 0 3429868 121537 None code07 Testing commission charges : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structure for 110/11 kV Transformer No. 48485.85 48485.85 2.0 False None None False None False 96971.7 0 3429869 121537 None code08 Material cost of CIRCUIT BREAKER: SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structureFor 110 kV Trans.Line No. 738160.5 738160.5 2.0 False None None False None False 1476321.0 0 3429870 121537 None code09 Errection charges of CIRCUIT BREAKER: SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structure. For 110 kV Trans.Line No. 11355.75 11355.75 2.0 False None None False None False 22711.5 0 3429871 121537 None code10 Testing commission charges of CIRCUIT BREAKER: SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-meta11ic terminal connector suitable for Drake ACSR and mounting structure For 110 kV Trans.Line No. 48485.85 48485.85 2.0 False None None False None False 96971.7 0 3429872 121537 None code11 ISOLATORS: Mateial cost of Isolators including marshalling box and suitable terminal connectors ,as required as per technical specification with solid core cylindrical post insulators ISOLATORS :110 kV, 1250 A, 31.5 KA class double break manually operated isolator with terminal connectors suitable for Drake ACSR/63mm A1.pipe. Upright mounting type with Earth switch LPH 4600mm terminal connectors suitable for Drake ACSR Set 400207.5 400207.5 2.0 False None None False None False 800415.0 0 3429873 121537 None code12 Errection charges :Upright mounting type with Earth switch LPH 4600mm terminal connectors suitable for Drake ACSR Set 9136.05 9136.05 2.0 False None None False None False 18272.1 0 3429874 121537 None code13 Testing and commisionig charges:Upright mounting type with Earth switch LPH 4600mm terminal connectors suitable for Drake ACSR Set 1366.05 1366.05 2.0 False None None False None False 2732.1 0 3429875 121537 None code14 ISOLATORS Material cost : Upright mounting type without Earth switch LPH 4600m for terminal connectors with 75mm Al.Pipe/Drake ACSR. Set 337953.0 337953.0 1.0 False None None False None False 337953.0 0 3429876 121537 None code15 Errection charges :Upright mounting type without Earth switch LPH 4600m for terminal connectors with 75mm Al.Pipe/Drake ACSR. Set 9136.05 9136.05 1.0 False None None False None False 9136.05 0 3429877 121537 None code16 Testing and commisionig charges : Upright mounting type without Earth switch LPH 4600m for terminal connectors with 75mm Al.Pipe/Drake ACSR. Set 1366.05 1366.05 1.0 False None None False None False 1366.05 0 3429878 121537 None code17 ISOLATORS Material cost :Upright mounting type without Earth switch LPH 6350m without earth switch terminal connectors with 63mm A1.Pipe/Drake ACSR. Set 345576.0 345576.0 4.0 False None None False None False 1382304.0 0 3429879 121537 None code18 Errection charges: Upright mounting type without Earth switch LPH 6350m without earth switch terminal connectors with 63mm A1.Pipe/Drake ACSR. Set 9136.05 9136.05 4.0 False None None False None False 36544.2 0 3429880 121537 None code19 Testing and commisionig charges: Upright mounting type without Earth switch LPH 6350m without earth switch terminal connectors with 63mm A1.Pipe/Drake ACSR. Set 1366.05 1366.05 4.0 False None None False None False 5464.2 0 3429881 121537 None code20 Material cost: 11 kV isolator, double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for feeders/Capacitor Bank No 22323.0 22323.0 2.0 False None None False None False 44646.0 0 3429882 121537 None code21 Errection charges: 11 kV isolator, double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for feeders/Capacitor Bank No 1274.7 1274.7 2.0 False None None False None False 2549.4 0 3429883 121537 None code22 Material cost: 110 KV isolator, single break 400A, 25KVA capacity with Roaster switch with rigid bimetallic terminal connector suitable for coyote ACSR Set 15703.8 15703.8 11.0 False None None False None False 172741.8 0 3429884 121537 None code23 Errection charges: 110 KV isolator, single break 400A, 25KVA capacity with Roaster switch with rigid bimetallic terminal connector suitable for coyote ACSR Set 1274.7 1274.7 11.0 False None None False None False 14021.7 0 3429885 121537 None code24 Material cost: CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor: 110 kV class, 31.5 KA, CT of ratio 200-100/ 1-1-1lA for Transformers Core - 1 :Vk-400 V, Rct 2 ohm at 200/1A, Accuracy class Ps-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 141025.5 141025.5 6.0 False None None False None False 846153.0 0 3429886 121537 None code25 Errection charges: 110 kV class, 31.5 KA, CT of ratio 200-100/ 1-1-1lA for Transformers Core - 1 :Vk-400 V, Rct 2 ohm at 200/1A, Accuracy class Ps-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 2237.55 2237.55 6.0 False None None False None False 13425.3 0 3429887 121537 None code26 Testing and commissionig charges: 110 kV class, 31.5 KA, CT of ratio 200-100/ 1-1-1lA for Transformers Core - 1 :Vk-400 V, Rct 2 ohm at 200/1A, Accuracy class Ps-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 4935.0 4935.0 6.0 False None None False None False 29610.0 0 3429888 121537 None code27 Material cost: 110 kV class, 31.5 KA, CT of ratio 400 -200/ 1-1-1lA for Tr.Lines Core - 1 : For differential/ distance protection: PS class.Vk-800V Rct 4 ohm at 400/1A Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 142296.0 142296.0 6.0 False None None False None False 853776.0 0 3429889 121537 None code28 Errection charges: 110 kV class, 31.5 KA, CT of ratio 400 - 200/ 1-1-1lA for Tr.Lines Core - 1 : For differential/ distance protection: PS class.Vk-800V Rct 4 ohm at 400/1A Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 2237.55 2237.55 6.0 False None None False None False 13425.3 0 3429890 121537 None code29 Testing and commissionig charges: 110 kV class, 31.5 KA, CT of ratio 400 - 200/ 1-1-1lA for Tr.Lines Core - 1 : For differential/ distance protection: PS class.Vk-800V Rct 4 ohm at 400/1A Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No. 4935.0 4935.0 6.0 False None None False None False 29610.0 0 3429891 121537 None code30 Material cost: 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection (similar rating and ratio as that of incomer of 11 kV Switchgear) with terminal connector suitable for 2 no's of 50 X8 mm Copper flats No. 59713.5 59713.5 2.0 False None None False None False 119427.0 0 3429892 121537 None code31 Errection charges: 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection (similar rating and ratio as that of incomer of 11 kV Switchgear) with terminal connector suitable for 2 no's of 50 X8 mm Copper flats No. 769.65 769.65 2.0 False None None False None False 1539.3 0 3429893 121537 None code32 Testing and commissionig charges: 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection (similar rating and ratio as that of incomer of 11 kV Switchgear) with terminal connector suitable for 2 no's of 50 X8 mm Copper flats No. 4772.25 4772.25 2.0 False None None False None False 9544.5 0 3429894 121537 None code33 VOLTAGE TRANSFORMER : Material cost : Single phase, oil filled outdoor type including Marshaling KIOSK with rigid bimetallic terminal connectors suitable for drake ACSR.110 kV class 110kV/RT3/110V/RT3/ 110V/RT3/110V/RT3 Core -1 : 300 VA, Accuracy class 3P. Protection Core - 2 : 200 VA, Accuracy class 0.2s. Metering Core - 3 : 50 VA, Accuracy class 3P. Open delta Protection No. 157542.0 157542.0 3.0 False None None False None False 472626.0 0 3429895 121537 None code34 Errection charges: 110 kV class 110kV/RT3/110V/RT3/ 110V/RT3/110V/RT3 Core -1 : 300 VA, Accuracy class 3P. Protection Core - 2 : 200 VA, Accuracy class 0.2s. Metering Core - 3 : 50 VA, Accuracy class 3P. Open delta Protection No. 2237.55 2237.55 3.0 False None None False None False 6712.65 0 3429896 121537 None code35 Testing & Commissioning charges : 110 kV class 110kV/RT3/110V/RT3/ 110V/RT3/110V/RT3 Core -1 : 300 VA, Accuracy class 3P. Protection Core - 2 : 200 VA, Accuracy class 0.2s. Metering Core - 3 : 50 VA, Accuracy class 3P. Open delta Protection No. 4968.6 4968.6 3.0 False None None False None False 14905.8 0 3429897 121537 None code36 a) Material cost:Surge Arrestors: (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR 96 kV, 10 KA, class - II, Normal duty Metal oxide type No. 43197.0 43197.0 12.0 False None None False None False 518364.0 0 3429898 121537 None code37 Errection charges: 96 kV, 10 KA, class - II, Normal duty Metal oxide type No. 466.2 466.2 12.0 False None None False None False 5594.4 0 3429899 121537 None code38 Material cost: kV, 10 KA with connector and clamp No. 966.0 966.0 33.0 False None None False None False 31878.0 0 3429900 121537 None code39 Errection charges: 9 kV, 10 KA with connector and clamp No. 40.95 40.95 33.0 False None None False None False 1351.35 0 3429901 121537 None code40 Material cost: Capacitor Bank : Design engineering, supply,erection (including civil works) Testing and commissioning of 12.1KV, 2.9MVAR capacitor Bank, star connected, doub1e bank with internal fuses, Terminal connectors, with suitable neutral CT and station class LA's, 0.2% series reactor on neutral side with mounting structure for NCT, capacitor Bank station class LA's series Reactor etc., complete as per specification (including testing commissioning) Note:11kv Switchgear and remote annunciation/control of the capacitor Bank is included in item No.A18 Set 565372.5 565372.5 2.0 False None None False None False 1130745.0 0 3429902 121537 None code41 Material cost of Control & Protection Panels Simplex type:110/11 kV Transformer panel Type No. 663201.0 663201.0 2.0 False None None False None False 1326402.0 0 3429903 121537 None code42 Errection charges of 110/11 kV Transformer panel Type No. 6256.95 6256.95 2.0 False None None False None False 12513.9 0 3429904 121537 None code43 Testing and commissionig charges of 110/11 kV Transformer panel Type No. 36385.65 36385.65 2.0 False None None False None False 72771.3 0 3429905 121537 None code44 Material cost of For 110KV Transmission line No. 478978.5 478978.5 2.0 False None None False None False 957957.0 0 3429906 121537 None code45 Errection charges of For 110KV Transmission line No. 6256.95 6256.95 2.0 False None None False None False 12513.9 0 3429907 121537 None code46 Testing and commissionig charges of For 110KV Transmission line No. 36385.65 36385.65 2.0 False None None False None False 72771.3 0 3429908 121537 None code47 Material cost : STATION STRUCTURES :110 kV Station Structure fabricated out of galvanised iron. Column type 21T1 with peak. (0.952 MT per tower) No 135801.2 135801.2 3.0 False None None False None False 407403.6 0 3429909 121537 None code48 Errection charges: 110 kV Station Structure fabricated out of galvanised iron. Column type 21T1 with peak. (0.952 MT per tower) No 6009.15 6009.15 3.0 False None None False None False 18027.45 0 3429910 121537 None code49 Material cost:110 kV Station structure fabricated out of galvanised iron. Beam type 21B1 without underhung isolator.(0.465, MT per tower) No 66442.07 66442.07 2.0 False None None False None False 132884.14 0 3429911 121537 None code50 Errection charges: 110 kV Station structure fabricated out of galvanised iron. Beam type 21B1 without underhung isolator.(0.465, MT per tower) No 6009.15 6009.15 2.0 False None None False None False 12018.3 0 3429912 121537 None code51 11 KV ODS and take off structure: Material cost : Supply and erection of D.P. Structure with all accessories using 9.0mtr long, 145 Kg WL suitable for mounting roaster GOS/Capacitor Bank Nos 27360.9 27360.9 13.0 False None None False None False 355691.7 0 3429913 121537 None code52 Errection charges: Supply and erection of D.P. Structure with all accessories using 9.0mtr long, 145 Kg WL suitable for mounting roaster GOS/Capacitor Bank Nos 3358.95 3358.95 13.0 False None None False None False 43666.35 0 3429914 121537 None code53 Material cost: Supply and erection of D.P. Structure with all accessories for Auxiliary transformer Nos 9306.15 9306.15 1.0 False None None False None False 9306.15 0 3429915 121537 None code54 Errection charges: Supply and erection of D.P. Structure with all accessories for Auxiliary transformer Nos 6261.15 6261.15 1.0 False None None False None False 6261.15 0 3429916 121537 None code55 MOUNTING STRUCTURES : Material cost: 110 kV Isolators. (0.741 MT er structure) LPH 4600mm No 105555.68 105555.68 3.0 False None None False None False 316667.04 0 3429917 121537 None code56 Errection charges :10 kV Isolators. (0.741 MT er structure) LPH 4600mm No 6009.15 6009.15 3.0 False None None False None False 18027.45 0 3429918 121537 None code57 Material cost:110 kV Isolators. (0.924 MT per structure) LPH 6350mm No 131710.19 131710.19 4.0 False None None False None False 526840.76 0 3429919 121537 None code58 Errection charges:110 kV Isolators. (0.924 MT per structure) LPH 6350mm No 6009.15 6009.15 4.0 False None None False None False 24036.6 0 3429920 121537 None code59 Material cost: Current transformer. 110 kV & 11KV NCT (0.152 MT per structure) No 21720.47 21720.47 12.0 False None None False None False 260645.64 0 3429921 121537 None code60 Errection charges: Current transformer. 110 kV & 11KV NCT (0.152 MT per structure) No 6009.15 6009.15 12.0 False None None False None False 72109.8 0 3429922 121537 None code61 Material cost: Voltage transformer. 110 kV . (0.142 MT per structure) No 20289.89 20289.89 3.0 False None None False None False 60869.67 0 3429923 121537 None code62 Errection charges: Voltage transformer. 110 kV . (0.142 MT per structure) No 6009.15 6009.15 3.0 False None None False None False 18027.45 0 3429924 121537 None code63 Material cost: Lightening arrestors. 110 kV . (0.111 MT per structure) No 15878.71 15878.71 12.0 False None None False None False 190544.52 0 3429925 121537 None code64 Errection charges: Lightening arrestors. 110 kV . (0.111 MT per structure) No 6009.15 6009.15 12.0 False None None False None False 72109.8 0 3429926 121537 None code65 Material cost: Pedestal insulators. 110 kV . (0.141 MT per structure) for Bus No 20155.21 20155.21 8.0 False None None False None False 161241.68 0 3429927 121537 None code66 Errection charges: Pedestal insulators. 110 kV . (0.141 MT per structure) for Bus No 6009.15 6009.15 8.0 False None None False None False 48073.2 0 3429928 121537 None code67 Material cost: Hight predestal insulators for 110 kv side (0.218 MT per sturcture) No 31150.12 31150.12 6.0 False None None False None False 186900.72 0 3429929 121537 None code68 Errection charges: Hight predestal insulators for 110 kv side (0.218 MT per sturcture) No 6009.15 6009.15 6.0 False None None False None False 36054.9 0 3429930 121537 None code69 Material cost: 11 kV Cable terminating structure for LV side of Transformer. (0.072 MT per power) No 6303.15 6303.15 2.0 False None None False None False 12606.3 0 3429931 121537 None code70 Errection charges: 11 kV Cable terminating structure for LV side of Transformer. (0.072 MT per power) No 6009.15 6009.15 2.0 False None None False None False 12018.3 0 3429932 121537 None code71 BUS BAR FORMATION : Material cost: Drake ACSR Mtr 406.35 406.35 300.0 False None None False None False 121905.0 0 3429933 121537 None code72 AAAC Moose Mtr 579.6 579.6 150.0 False None None False None False 86940.0 0 3429934 121537 None code73 Coyote ACSR (llKV Side ) Mtr 145.95 145.95 30.0 False None None False None False 4378.5 0 3429935 121537 None code74 7/3.15 mm Ground wire Mtr 92.4 92.4 150.0 False None None False None False 13860.0 0 3429936 121537 None code75 BUS BAR FORMATION : Errection charges: Formation of Main/Cross bus on 110 kV side No 12691.35 12691.35 3.0 False None None False None False 38074.05 0 3429937 121537 None code76 Faraday cage formation as per specification for 110KV -Approx rate considered No 2625.0 2625.0 2.0 False None None False None False 5250.0 0 3429938 121537 None code77 Supply and Erection of rigid bus with taps and clamps (Material cost) Aluminium tube conforming to 6340WP of IS -5082/l969 (BS 1600-Sch.40) of following nominal diameter a)75mm - 110KV Main Bus. Mtr 1665.3 1665.3 42.0 False None None False None False 69942.6 0 3429939 121537 None code78 b)63mm size connecting isolator to vertical tap and also connecting equipments to equipments -110KV side. Mtr 1524.6 1524.6 72.0 False None None False None False 109771.2 0 3429940 121537 None code79 Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end. Nos 3922.8 3922.8 6.0 False None None False None False 23536.8 0 3429941 121537 None code80 Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type - 110kV side a)Rigid Type Nos 1840.65 1840.65 3.0 False None None False None False 5521.95 0 3429942 121537 None code81 Sliding Type Nos 1555.05 1555.05 5.0 False None None False None False 7775.25 0 3429943 121537 None code82 Corona Bell Suitable for Aluminium Pipe of size 75mm on 110kV side.(BS 1600) Nos 712.95 712.95 3.0 False None None False None False 2138.85 0 3429944 121537 None code83 Flexible type terminal conector suitable for 75m‘' Main bus Aluminium pipe to connect Bus PT Nos 1840.65 1840.65 3.0 False None None False None False 5521.95 0 3429945 121537 None code84 Flexible type terminal conector suitable for 63 mm Aluminium pipe to connect Bus isolator Nos 4113.9 4113.9 12.0 False None None False None False 49366.8 0 3429946 121537 None code85 Rigid type terminall connector for Drake ACSR to isolator Nos 2570.4 2570.4 27.0 False None None False None False 69400.8 0 3429947 121537 None code86 End cap suitable for 63mm Aluminium tube Nos 716.1 716.1 3.0 False None None False None False 2148.3 0 3429948 121537 None code87 INSULATORS : Material cost: Post insulator Cylindrical Solid core Insulator 110 kV,1 Unit/stack No 12657.75 12657.75 14.0 False None None False None False 177208.5 0 3429949 121537 None code88 Errection charges: Post insulator Cylindrical Solid core Insulator 110 kV,1 Unit/stack No 466.2 466.2 14.0 False None None False None False 6526.8 0 3429950 121537 None code89 Single tension string 90KN, 9 units of each along with bolted type tension clamp and hardware suitable for Drake ACSR (110KV) No 8151.15 8151.15 6.0 False None None False None False 48906.9 0 3429951 121537 None code90 Single tension string 90KN, 9 units of each along with bolted type tension clamp and hardware suitable for Drake ACSR (110KV) No 7203.0 7203.0 3.0 False None None False None False 21609.0 0 3429952 121537 None code91 HARDWARES : C type wedge connector suitable for Lynx-Dake(110 kV line side) No 2017.05 2017.05 12.0 False None None False None False 24204.6 0 3429953 121537 None code92 Post Insulator clamp suitable for 75mm A1.Tube/ Single Drake ACSR and 110 kV Solid Core Insulator No 1060.5 1060.5 14.0 False None None False None False 14847.0 0 3429954 121537 None code93 Auxiliary Transformer: Material cost : Supply and erection of Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage of 2.5% along with DOLO/HG-fuse imit, LT protection kit, Distribution box and other accessories as per specification. No 366655.8 366655.8 1.0 False None None False None False 366655.8 0 3429955 121537 None code94 Errection charges: Supply and erection of Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step voltage of 2.5% along with DOLO/HG-fuse imit, LT protection kit, Distribution box and other accessories as per specification. No 19521.6 19521.6 1.0 False None None False None False 19521.6 0 3429956 121537 None code95 Material cost: LTAC Distribution panel ( Indoor) comprising cif 415 Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse etec complete with all necessary protection as per technical specification 415 V. No 90205.5 90205.5 1.0 False None None False None False 90205.5 0 3429957 121537 None code96 Errection charges: LTAC Distribution panel ( Indoor) comprising cif 415 Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG HRC fuse + 2 nos 3 phase 32A OG HRC fuse + 6 nos 3 phase 16A HRC fuse etec complete with all necessary protection as per technical specification 415 V. No 3367.35 3367.35 1.0 False None None False None False 3367.35 0 3429958 121537 None code97 Material cost: AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No 76230.0 76230.0 1.0 False None None False None False 76230.0 0 3429959 121537 None code98 Errection charges: AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No 2589.3 2589.3 1.0 False None None False None False 2589.3 0 3429960 121537 None code99 Material cost: LT Power armoured UG cable as per specification: Material cost:1.1kV grade PVC Insulated armoured Aluminium cable 4c x 95 Sq.mm Mtr 800.1 800.1 100.0 False None None False None False 80010.0 0 3429961 121537 None code100 Errection charges: 1.1kV grade PVC Insulated armoured Aluminium cable 4c x 95 Sq.mm Mtr 15.75 15.75 100.0 False None None False None False 1575.0 0 3429962 121537 None code101 Material cost:: 1.1kV grade PVC Insulated armoured Copper cables 4c x 25 Sq.mm Mtr 909.3 909.3 150.0 False None None False None False 136395.0 0 3429963 121537 None code102 Errection charges: 1.1kV grade PVC Insulated armoured Copper cables 4c x 25 Sq.mm Mtr 15.75 15.75 150.0 False None None False None False 2362.5 0 3429964 121537 None code103 Material cost: 1.1kV grade PVC Insulated armoured Copper cables 4c x 10 Sq.mm Mtr 393.75 393.75 200.0 False None None False None False 78750.0 0 3429965 121537 None code104 Errection charges: 1.1kV grade PVC Insulated armoured Copper cables 4c x 10 Sq.mm Mtr 15.75 15.75 200.0 False None None False None False 3150.0 0 3429966 121537 None code105 STATION BATTERY & BATTERY CHARGER : Material cost: 110 V, 100 AH, Battery set consisting of 55 No cells with accessories as per specification Set 633979.5 633979.5 1.0 False None None False None False 633979.5 0 3429967 121537 None code106 Errection charges: 110 V, 100 AH, Battery set consisting of 55 No cells with accessories as per specification Set 12202.05 12202.05 1.0 False None None False None False 12202.05 0 3429968 121537 None code107 Material cost: Battery charger suitable for '1 X 110 V, 100 AH, Battery set consisting of 55 No cells with float cum booster type battery charger as per specification Set 177870.0 177870.0 1.0 False None None False None False 177870.0 0 3429969 121537 None code108 Errection charges: Battery charger suitable for '1 X 110 V, 100 AH, Battery set consisting of 55 No cells with float cum booster type battery charger as per specification Set 1204.35 1204.35 1.0 False None None False None False 1204.35 0 3429970 121537 None code109 Material cost: DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 no 100A SFU for IC + 12 Nos, 32A SFU for OG etc,. complete. No 54631.5 54631.5 1.0 False None None False None False 54631.5 0 3429971 121537 None code110 Errection charges: DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 no 100A SFU for IC + 12 Nos, 32A SFU for OG etc,. complete. No 2589.3 2589.3 1.0 False None None False None False 2589.3 0 3429972 121537 None code111 Copper Control Cabvles :1.1kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/ Gland as per technical specifications: Material cost:19c x 2.5 Sq.mm Mtr 551.25 551.25 2000.0 False None None False None False 1102500.0 0 3429973 121537 None code112 Errection charges:19c x 2.5 Sq.mm Mtr 15.75 15.75 2000.0 False None None False None False 31500.0 0 3429974 121537 None code113 Material cost:4c x 6 Sq.mm Mtr 259.35 259.35 2200.0 False None None False None False 570570.0 0 3429975 121537 None code114 Errection charges: 4c x 6 Sq.mm Mtr 15.75 15.75 2200.0 False None None False None False 34650.0 0 3429976 121537 None code115 Material cost: 4c x 2.5 Sq.mm Mtr 149.1 149.1 1500.0 False None None False None False 223650.0 0 3429977 121537 None code116 Errection charges: 4c x 2.5 Sq.mm Mtr 15.75 15.75 1500.0 False None None False None False 23625.0 0 3429978 121537 None code117 Material cost: 2c x 6 Sq.mm Mtr 161.7 161.7 1500.0 False None None False None False 242550.0 0 3429979 121537 None code118 Errection charges: 2c x 6 Sq.mm Mtr 15.75 15.75 1500.0 False None None False None False 23625.0 0 3429980 121537 None code119 Material cost: 2cx2.5 Sq.mm Mtr 98.7 98.7 500.0 False None None False None False 49350.0 0 3429981 121537 None code120 Errection charges: 2cx2.5 Sq.mm Mtr 15.75 15.75 500.0 False None None False None False 7875.0 0 3429982 121537 None code121 Switchgear: Material cost : Switchgear 11kV,25KA, 500MVA Metal clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+2CB+1BC+1AP (Remote Annouciation cum control pane) with CT's & PT's etc, complete as per technical specification. with erection at complete switchgear. Set 16235719.5 16235719.5 1.0 False None None False None False 16235719.5 0 3429983 121537 None code122 Testing and commissioning charges: Switchgear 11kV,25KA, 500MVA Metal clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+2CB+1BC+1AP (Remote Annouciation cum control pane) with CT's & PT's etc, complete as per technical specification. with erection at complete switchgear. Set 120840.3 120840.3 1.0 False None None False None False 120840.3 0 3429984 121537 None code123 11 KV UG cable with required cable termination kits at both ends: Material cost : a) One run of 11KV class 3 coreX 95 sq mm XLPE cable (to be run for Auxiliary transformers from 11KV switch gear to Auxiliary transformer) Mtr 934.15 934.15 50.0 False None None False None False 46707.5 0 3429985 121537 None code124 Errection charges: One run of 11KV class 3 coreX 95 sq mm XLPE cable (to be run for Auxiliary transformers from 11KV switch gear to Auxiliary transformer) Mtr 75.6 75.6 50.0 False None None False None False 3780.0 0 3429986 121537 None code125 Material cost : 11KV XLPE cable,1000sq mm Aluminium cable from 110/11KV Transformer to 11KV switch gear Mtr 1244.25 1244.25 350.0 False None None False None False 435487.5 0 3429987 121537 None code126 Errection charges :11KV XLPE cable,1000sq mm Aluminium cable from 110/11KV Transformer to 11KV switch gear Mtr 75.6 75.6 350.0 False None None False None False 26460.0 0 3429988 121537 None code127 Material cost : 11KV XLPE cable ,240sq mm Aluminium cable from 3 core to run from Switch gear to 11KV take off DP structure. Mtr 1738.85 1738.85 200.0 False None None False None False 347770.0 0 3429989 121537 None code128 Errection charges :11KV XLPE cable ,240sq mm Aluminium cable from 3 core to run from Switch gear to 11KV take off DP structure. Mtr 75.6 75.6 200.0 False None None False None False 15120.0 0 3429990 121537 None code129 Cable termination kit for 3coreX95 sq mm as per technical specification: Material cost: Indoor: Nos 3931.2 3931.2 1.0 False None None False None False 3931.2 0 3429991 121537 None code130 Errection charges: Indoor: Nos 3939.6 3939.6 1.0 False None None False None False 3939.6 0 3429992 121537 None code131 Material cost: Outdoor: Nos 4270.35 4270.35 1.0 False None None False None False 4270.35 0 3429993 121537 None code132 Errection charges: Outdoor: Nos 3939.6 3939.6 1.0 False None None False None False 3939.6 0 3429994 121537 None code133 l000sq mm sing1e core: Material cost:Indoor Nos 3998.4 3998.4 8.0 False None None False None False 31987.2 0 3429995 121537 None code134 Errection charges: Indoor Nos 3939.6 3939.6 8.0 False None None False None False 31516.8 0 3429996 121537 None code135 Material cost: Outdoor Nos 4263.0 4263.0 8.0 False None None False None False 34104.0 0 3429997 121537 None code136 Errection charges: Outdoor Nos 3939.6 3939.6 8.0 False None None False None False 31516.8 0 3429998 121537 None code137 240.00 sq mm 3 core: Material cost: Indoor Nos 4925.55 4925.55 13.0 False None None False None False 64032.15 0 3429999 121537 None code138 Errection charges: Indoor Nos 3939.6 3939.6 13.0 False None None False None False 51214.8 0 3430000 121537 None code139 Material cost: Outdoor Nos 5583.9 5583.9 13.0 False None None False None False 72590.7 0 3430001 121537 None code140 Errection charges: Outdoor Nos 3939.6 3939.6 13.0 False None None False None False 51214.8 0 3430002 121537 None code141 Material cost: FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS : Foam type extinguisher (Mechanical) 50 Ltr. capacity No 10617.6 10617.6 4.0 False None None False None False 42470.4 0 3430003 121537 None code142 Foam type extinguisher (Mechanical) 9 Ltr. capacity No 4323.9 4323.9 4.0 False None None False None False 17295.6 0 3430004 121537 None code143 Water type (gas pressure type) 9 Ltr. capacity No 2628.15 2628.15 6.0 False None None False None False 15768.9 0 3430005 121537 None code144 Carbon di-oxide type 4.5 kg Capaciy No 9125.55 9125.55 6.0 False None None False None False 54753.3 0 3430006 121537 None code145 Sand type G.I Buckets 15 Ltr. Capacity No 633.15 633.15 12.0 False None None False None False 7597.8 0 3430007 121537 None code145 Steel stands for above to have 4 buckets to each stand. No 2480.1 2480.1 3.0 False None None False None False 7440.3 0 3430008 121537 None code146 Material cost: Maintenance Tools and Plant: Portable (mobile) oil pumps (1/2 HP air pump 500 - 1000 gallons) No 21259.35 21259.35 1.0 False None None False None False 21259.35 0 3430009 121537 None code147 Telescopic ladder Aluminium 6 Mtr. Height No 23753.1 23753.1 1.0 False None None False None False 23753.1 0 3430010 121537 None code148 Ring spanner set Set 924.0 924.0 1.0 False None None False None False 924.0 0 3430011 121537 None code149 Tube spanner set Set 1506.75 1506.75 1.0 False None None False None False 1506.75 0 3430012 121537 None code150 Pipe wrench 24 inch Nos 1312.5 1312.5 2.0 False None None False None False 2625.0 0 3430013 121537 None code151 Pipe wrench 18 inch. Nos 726.6 726.6 2.0 False None None False None False 1453.2 0 3430014 121537 None code152 Hydraulic crimping tools up to 1000 Sq.mm No 65113.65 65113.65 1.0 False None None False None False 65113.65 0 3430015 121537 None code153 Rubber hand gloves (15 kV tested) Pairs 307.65 307.65 3.0 False None None False None False 922.95 0 3430016 121537 None code154 Rechargable 5W LED hand torch Nos 1342.95 1342.95 4.0 False None None False None False 5371.8 0 3430017 121537 None code155 Insulated cutting plier 12 inch size Nos 412.65 412.65 3.0 False None None False None False 1237.95 0 3430018 121537 None code156 Insulated cutting plier 8 inch size Nos 247.8 247.8 3.0 False None None False None False 743.4 0 3430019 121537 None code157 Line live tester AC/DC 500 V Nos 326.55 326.55 2.0 False None None False None False 653.1 0 3430020 121537 None code158 Screw driver 18" Nos 234.15 234.15 3.0 False None None False None False 702.45 0 3430021 121537 None code159 Screw driver 12" Nos 78.75 78.75 3.0 False None None False None False 236.25 0 3430022 121537 None code160 Hammer 8 lbs Nos 521.85 521.85 2.0 False None None False None False 1043.7 0 3430023 121537 None code161 Hammer 2 lbs Nos 261.45 261.45 2.0 False None None False None False 522.9 0 3430024 121537 None code162 Chain pulley block 5 ton capacity Nos 43927.8 43927.8 1.0 False None None False None False 43927.8 0 3430025 121537 None code163 Hydraulic jack 5T capacity No 7400.4 7400.4 4.0 False None None False None False 29601.6 0 3430026 121537 None code164 Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height. Nos 29222.55 29222.55 1.0 False None None False None False 29222.55 0 3430027 121537 None code165 Allen keys Set 501.9 501.9 1.0 False None None False None False 501.9 0 3430028 121537 None code166 Box spanners Set 4690.35 4690.35 1.0 False None None False None False 4690.35 0 3430029 121537 None code167 Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester. No 106611.75 106611.75 1.0 False None None False None False 106611.75 0 3430030 121537 None code168 Insulation megger 2.5 - 5 kV No 58073.4 58073.4 1.0 False None None False None False 58073.4 0 3430031 121537 None code169 Insulation megger 500 V No 18486.3 18486.3 1.0 False None None False None False 18486.3 0 3430032 121537 None code170 Multimeter electrornechanical No 3857.7 3857.7 1.0 False None None False None False 3857.7 0 3430033 121537 None code171 Multimeter Electronic No 8390.55 8390.55 1.0 False None None False None False 8390.55 0 3430034 121537 None code172 Hydrometer No 690.9 690.9 1.0 False None None False None False 690.9 0 3430035 121537 None code173 DC Voltmeter range -5V to + 5V No 2835.0 2835.0 1.0 False None None False None False 2835.0 0 3430036 121537 None code174 Hydrometer syringe suitable for vent holes No 945.0 945.0 1.0 False None None False None False 945.0 0 3430037 121537 None code175 Specific gravity correction chart No 945.0 945.0 1.0 False None None False None False 945.0 0 3430038 121537 None code176 Thermometer with wall mounting holder No 2835.0 2835.0 1.0 False None None False None False 2835.0 0 3430039 121537 None code177 Rubber appron No 2007.6 2007.6 1.0 False None None False None False 2007.6 0 3430040 121537 None code178 Pippette Nos 827.4 827.4 1.0 False None None False None False 827.4 0 3430041 121537 None code179 Protective goggle Nos 945.0 945.0 1.0 False None None False None False 945.0 0 3430042 121537 None code180 Acid resisting jars (4 pint capacity) Nos 945.0 945.0 1.0 False None None False None False 945.0 0 3430043 121537 None code181 Glass funnel Nos 709.8 709.8 2.0 False None None False None False 1419.6 0 3430044 121537 None code182 Grounding sticks Nos 1842.75 1842.75 6.0 False None None False None False 11056.5 0 3430045 121537 None code183 Hickery rods Nos 5668.95 5668.95 6.0 False None None False None False 34013.7 0 3430046 121537 None code184 Manila rope 1" Mtr 7003.5 7003.5 100.0 False None None False None False 700350.0 0 3430047 121537 None code185 Manila rope 3/4" Mtr 4129.65 4129.65 100.0 False None None False None False 412965.0 0 3430048 121537 None code186 Files of sizes No 9094.05 9094.05 6.0 False None None False None False 54564.3 0 3430049 121537 None code187 Saftey belts No 1062.6 1062.6 2.0 False None None False None False 2125.2 0 3430050 121537 None code188 Saftey Helmets No 289.8 289.8 2.0 False None None False None False 579.6 0 3430051 121537 None code189 Steel measurmg tape 30 meters No 796.95 796.95 1.0 False None None False None False 796.95 0 3430052 121537 None code190 Steel measuring tape 15 meters No 577.5 577.5 1.0 False None None False None False 577.5 0 3430053 121537 None code191 Rain coat with Dick back No 1180.2 1180.2 2.0 False None None False None False 2360.4 0 3430054 121537 None code192 SF-6 gas leak Detector No 68504.1 68504.1 1.0 False None None False None False 68504.1 0 3430055 121537 None code193 Wall mounting type holder for hydrometer No 2835.0 2835.0 1.0 False None None False None False 2835.0 0 3430056 121537 None code194 Rubber shoes knee height Pairs 2244.9 2244.9 2.0 False None None False None False 4489.8 0 3430057 121537 None code195 Material cost: MISCELLANOUS ITEMS: Rubber mats 2000 mm x 1000 mm x 12 mm size suitable for 1.1 kV class. No 3150.0 3150.0 4.0 False None None False None False 12600.0 0 3430058 121537 None code196 First aid box. No 525.0 525.0 1.0 False None None False None False 525.0 0 3430059 121537 None code197 Shock treatment chart:s, hard board, liminated with coloured pictures & literature both in Kannada & English. No 2100.0 2100.0 1.0 False None None False None False 2100.0 0 3430060 121537 None code198 Water filter / Water purifies : Wall mounting type (Aqua-guard type). No 18900.0 18900.0 1.0 False None None False None False 18900.0 0 3430061 121537 None code199 Sub-station name board duly painted. No 10500.0 10500.0 1.0 False None None False None False 10500.0 0 3430062 121537 None code200 Fixograph of size l.5m x 2.5m with English/Kannada alphabets. Set 5460.0 5460.0 1.0 False None None False None False 5460.0 0 3430063 121537 None code201 Door locks 7 levers (Navtal make) No 525.0 525.0 5.0 False None None False None False 2625.0 0 3430064 121537 None code202 Danger board(prohibited) with support structure including fixing in front of the gate No 2100.0 2100.0 1.0 False None None False None False 2100.0 0 3430065 121537 None code203 Equipment name plates and earthing name plates including fixing at outdoor yard LS 10500.0 10500.0 1.0 False None None False None False 10500.0 0 3430066 121537 None code204 Material cost: Furniture for Control Room Staff and maintenance: Steel Almirahs 6 1/2 feet Nos 10500.0 10500.0 2.0 False None None False None False 21000.0 0 3430067 121537 None code205 Steel Almirahs 6 1/2 feet with glass panel doors Nos 8400.0 8400.0 1.0 False None None False None False 8400.0 0 3430068 121537 None code206 Officers tables Nos 9450.0 9450.0 2.0 False None None False None False 18900.0 0 3430069 121537 None code207 Steel Slotted angle rack (big size) Nos 2625.0 2625.0 4.0 False None None False None False 10500.0 0 3430070 121537 None code208 Steel Slotted angle rack (small Size) Nos 2100.0 2100.0 4.0 False None None False None False 8400.0 0 3430071 121537 None code209 Steel dustbins Nos 420.0 420.0 4.0 False None None False None False 1680.0 0 3430072 121537 None code210 Executive revolving chairs Nos 8400.0 8400.0 2.0 False None None False None False 16800.0 0 3430073 121537 None code211 S Type Arm Chairs Nos 1575.0 1575.0 6.0 False None None False None False 9450.0 0 3430074 121537 None code212 Steel folding Chairs Nos 525.0 525.0 4.0 False None None False None False 2100.0 0 3430075 121537 None code213 Material cost: Equipments for establishing SCADA communication : Remote Terminal Unit (RTU) Nos 1035457.5 1035457.5 1.0 False None None False None False 1035457.5 0 3430076 121537 None code214 Data Concentrator Unit DCU) Nos 39385.5 39385.5 1.0 False None None False None False 39385.5 0 3430077 121537 None code215 2 kVA online UPS (230 V AC 1 phase 50 Hz) Nos 176599.5 176599.5 1.0 False None None False None False 176599.5 0 3430078 121537 None code216 Current Cables-Copper Core with cross section 4.0 sq.mm Multistrand 7 Core (4Cx10sq.mm rates considered) Mtr 393.75 393.75 20.0 False None None False None False 7875.0 0 3430079 121537 None code217 Voltage Cables-Copper Core with cross section 2.5 sq.mm Multistrand 4 Core Mtr 149.1 149.1 20.0 False None None False None False 2982.0 0 3430080 121537 None code218 Signal Cables-armoured Copper Core with cross section 0.5 sq.mm Multi strand 10 Core Mtr 150.15 150.15 500.0 False None None False None False 75075.0 0 3430081 121537 None code219 Control cables-Copper core with cross section1.5 sq.mm Multi strand 10 Core Mtr 162.75 162.75 160.0 False None None False None False 26040.0 0 3430082 121537 None code220 Supply Cables-Copper Core with cross section 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications. Mtr 166.95 166.95 15.0 False None None False None False 2504.25 0 3430083 121537 None code221 Supply Cables-Copper Core with cross section 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications. Mtr 399.0 399.0 30.0 False None None False None False 11970.0 0 3430084 121537 None code222 Errection charges : Equipments for establishing SCADA communication : Remote Terminal Unit (RTU) Nos 26868.45 26868.45 1.0 False None None False None False 26868.45 0 3430085 121537 None code223 Data Concentrator Unit DCU) Nos 12705.0 12705.0 1.0 False None None False None False 12705.0 0 3430086 121537 None code224 2 kVA online UPS (230 V AC 1 phase 50 Hz) Nos 6808.2 6808.2 1.0 False None None False None False 6808.2 0 3430087 121537 None code225 Integration of RTU,DCU and UPS with field equipments Nos 28361.55 28361.55 1.0 False None None False None False 28361.55 0 3430088 121537 None code226 Cables - Supplying and Laying: Current Cables-Copper Core with cross section 4.0 sq.mm Multistrand 7 Core (4Cx10sq.mm rates considered) Mtr 15.75 15.75 20.0 False None None False None False 315.0 0 3430089 121537 None code227 Voltage Cables-Copper Core with cross section 2.5 sq.mm Multistrand 4 Core Mtr 15.75 15.75 20.0 False None None False None False 315.0 0 3430090 121537 None code228 Signal Cables-armoured Copper Core with cross section 0.5 sq.mm Multi strand 10 Core Mtr 15.75 15.75 500.0 False None None False None False 7875.0 0 3430091 121537 None code229 Control cables Copper core with cross section 1.5 sq.mm Multi strand 10 Core Mtr 15.75 15.75 160.0 False None None False None False 2520.0 0 3430092 121537 None code230 Supply Cables-Copper Core with cross section 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications. Mtr 15.75 15.75 15.0 False None None False None False 236.25 0 3430093 121537 None code231 Supply Cables-Copper Core with cross section 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications. Satelite Communication required will be arranged by SLDC. Mtr 15.75 15.75 30.0 False None None False None False 472.5 0 3430094 121537 None code232 Earth Mat Formation (Errection charges): Supplying and laying MS.Flat 50 x 6 mm flat welding and applying ACB paint to welded portion and covering with Sodium Bentonite Clay (SBC supplied by Corporation) as per drawing/standard (all other materials to be supplied by contractor) Rmtr 424.2 424.2 2460.0 False None None False None False 1043532.0 0 3430095 121537 None code233 Grounding of equipments with 50 x 6 mm GI flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor. Rmtr 351.75 351.75 1118.0 False None None False None False 393256.5 0 3430096 121537 None code234 Providing 25mm dia, 1.05mtr. Long Earthmat Spike MS Rod including bending top 50mm etc No 475.65 475.65 70.0 False None None False None False 33295.5 0 3430097 121537 None code235 Material cost: Providing C.I. Pipe of l00mm ID 13mm thick 2.75mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) No 13431.6 13431.6 70.0 False None None False None False 940212.0 0 3430098 121537 None code236 Errection charges: Providing C.I. Pipe of l00mm ID 13mm thick 2.75mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) Set 3665.55 3665.55 44.0 False None None False None False 161284.2 0 3430099 121537 None code237 Errection charges: Supplying and fixing 4S0mm dia x 450mm height 15"to 2" Hume pipe collars for earth pits. No 1573.95 1573.95 44.0 False None None False None False 69253.8 0 3430100 121537 None code238 Errection charges: Station and yard Lighting (Outdoor) to be designed, assessed and Quoted by the bidder): Design of Station yard illumination in confirmity with the illumination levels mentioned in the technical specification, supply & erection of station yard illumination materials /equipment including lamp post(fabricated galvanised structures), Illumination fittings, control gears, UG/OH cables, conduit pipes, control boxes etc,. including necessary civil works, complete LS 315000.0 315000.0 1.0 False None None False None False 315000.0 0 3430101 121537 None code239 Material cost: Station Mandatpry spares: (Rates of 110KV Sagnoor DWA is considered): Circuit breaker (CB) closing coil with resistor (For one complete circuit breaker) a) for 123KV CB Set 10500.0 10500.0 1.0 False None None False None False 10500.0 0 3430102 121537 None code240 Tripping coil with resistor (For one complete circuit breaker) a) for 12KV CB Set 12600.0 12600.0 1.0 False None None False None False 12600.0 0 3430103 121537 None code241 Teminal pad (For one complete circuit breaker) a) for 123KV CB Set 12600.0 12600.0 1.0 False None None False None False 12600.0 0 3430104 121537 None code242 Terminal connector (For one complete circuit breaker) a) for 123KV CB Set 10500.0 10500.0 1.0 False None None False None False 10500.0 0 3430105 121537 None code243 SF6 Gas (40% of total gas Qty of each sub-station) for sub-station at Sagnoor LS 52500.0 52500.0 1.0 False None None False None False 52500.0 0 3430106 121537 None code244 Isolator: Copper contract fingers male & female (For one complete isolator )a) for 123KV Class Set 52500.0 52500.0 1.0 False None None False None False 52500.0 0 3430107 121537 None code245 Teminal connector (For one complete isolator) ) for 123KV class Set 10500.0 10500.0 1.0 False None None False None False 10500.0 0 3430108 121537 None code246 Terminal pad (For one complete isolator) ) for 123KV class Set 10500.0 10500.0 1.0 False None None False None False 10500.0 0 1719841727000 0 None None Electrical Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. (PART B SUB STATION CIVIL WORKS) 30260895.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3430109 121538 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 99.75 99.75 980.0 False None None False None False 97755.0 0 3430110 121538 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 107.1 107.1 3679.8993 False None None False None False 394117.21503 0 3430111 121538 None code03 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling, water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 1995.15 False None None False None False 992986.155 0 3430112 121538 None code04 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 250.4 False None None False None False 1489178.88 0 3430113 121538 None code05 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% Cum 6799.39 6799.39 170.82 False None None False None False 1161471.7998 0 3430114 121538 None code06 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation of drains add at 35% Cum 8911.82 8911.82 119.45 False None None False None False 1064516.899 0 3430115 121538 None code07 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation of retaining wall add at 10% for formwork Cum 7261.49 7261.49 1120.79 False None None False None False 8138605.3771 0 3430116 121538 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For column upto PB add at 70% Cum 11222.3 11222.3 40.0 False None None False None False 448892.0 0 3430117 121538 None code09 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For PB add at 50% Cum 9958.73 9958.73 5.0 False None None False None False 49793.65 0 3430118 121538 None code10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Beams & lintels add at 60% Ground floor Cum 11138.4 11138.4 36.0 False None None False None False 400982.4 0 3430119 121538 None code11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For columns of super structure add at 70% Ground floor Cum 11834.55 11834.55 18.4 False None None False None False 217755.72 0 3430120 121538 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Roof slab add at 50% - Ground floor Cum 10442.25 10442.25 27.0 False None None False None False 281940.75 0 3430121 121538 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Chejjas & Canopy of CRB add at 45% for formwork Cum 10094.18 10094.18 5.0 False None None False None False 50470.9 0 3430122 121538 None code15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregate for DPC sill coping & screed concrete add at 5% Cum 6854.24 6854.24 37.84 False None None False None False 259364.4416 0 3430123 121538 None code16 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates for plinth protection & floor concrete of CRB Cum 6527.85 6527.85 7.25 False None None False None False 47326.9125 0 3430124 121538 None code17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M 40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8293.01 8293.01 44.5 False None None False None False 369038.945 0 3430125 121538 None code18 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 34.49 False None None False None False 231374.4405 0 3430126 121538 None code19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8367.45 8367.45 97.9445 False None None False None False 819545.706525 0 3430127 121538 None code20 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1375.5 1375.5 810.905 False None None False None False 1115399.8275 0 3430128 121538 None code21 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of incharge Sqm 1475.25 1475.25 154.56 False None None False None False 228014.64 0 3430129 121538 None code22 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 168.0 168.0 195.37 False None None False None False 32822.16 0 3430130 121538 None code23 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 327.6 327.6 118.0 False None None False None False 38656.8 0 3430131 121538 None code24 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 371.7 371.7 2952.55 False None None False None False 1097462.835 0 3430132 121538 None code25 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.. Sqm 2994.6 2994.6 105.0 False None None False None False 314433.0 0 3430133 121538 None code26 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc tion of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Sqm 1308.3 1308.3 20.0 False None None False None False 26166.0 0 3430134 121538 None code27 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile Sqm 1323.0 1323.0 36.0 False None None False None False 47628.0 0 3430135 121538 None code28 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 933.45 933.45 10.0 False None None False None False 9334.5 0 3430136 121538 None code29 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1461.6 1461.6 30.0 False None None False None False 43848.0 0 3430137 121538 None code30 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 105.0 105.0 500.0 False None None False None False 52500.0 0 3430138 121538 None code31 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 163.8 163.8 480.0 False None None False None False 78624.0 0 3430139 121538 None code32 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 4126.05 False None None False None False 753829.335 0 3430140 121538 None code33 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings Kg 93.93 93.93 7500.0 False None None False None False 704475.0 0 3430141 121538 None code34 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kg 82.96 82.96 60748.99 False None None False None False 5039736.2104 0 3430142 121538 None code35 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 8689.8 8689.8 6.0 False None None False None False 52138.8 0 3430143 121538 None code36 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 599.55 599.55 583.2 False None None False None False 349657.56 0 3430144 121538 None code37 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications Sqm 1229.55 1229.55 61.79 False None None False None False 75973.8945 0 3430145 121538 None code38 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width including cost of materials, labour, usage charges of machinery complete as per specifications. m 310.8 310.8 250.0 False None None False None False 77700.0 0 3430146 121538 None code39 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications No 458.85 458.85 5.0 False None None False None False 2294.25 0 3430147 121538 None code40 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 136.5 136.5 5.0 False None None False None False 682.5 0 3430148 121538 None code41 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) No 288.75 288.75 21.0 False None None False None False 6063.75 0 3430149 121538 None code42 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 593.25 593.25 200.0 False None None False None False 118650.0 0 3430150 121538 None code43 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam Sqm 2484.3 2484.3 3.15 False None None False None False 7825.545 0 3430151 121538 None code44 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 431.55 431.55 60.0 False None None False None False 25893.0 0 3430152 121538 None code45 Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing 150 mm dia. pipes (V.5,SOR code T030B P.No. 184) m 489.3 489.3 30.0 False None None False None False 14679.0 0 3430153 121538 None code46 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 1.0 False None None False None False 5128.2 0 3430154 121538 None code47 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and bracket , cutting and making good the walls and floors wherever required : 14.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 6275.85 6275.85 1.0 False None None False None False 6275.85 0 3430155 121538 None code48 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.1 3236.1 2.0 False None None False None False 6472.2 0 3430156 121538 None code49 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions) Each 1119.3 1119.3 2.0 False None None False None False 2238.6 0 3430157 121538 None code50 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. l 9.45 9.45 2000.0 False None None False None False 18900.0 0 3430158 121538 None code51 Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g No 151.2 151.2 1.0 False None None False None False 151.2 0 3430159 121538 None code52 Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g No 137.55 137.55 1.0 False None None False None False 137.55 0 3430160 121538 None code53 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 118.65 118.65 8501.91 False None None False None False 1008751.6215 0 3430161 121538 None code54 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. And Providing & fixing cast iron cover with frame and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 7786.8 7786.8 12.0 False None None False None False 93441.6 0 3430162 121538 None code55 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. HDPE Grade PE80-PN6.0 - 63mm dia m 229.95 229.95 155.0 False None None False None False 35642.25 0 3430163 121538 None code56 32 mm nominal dia Pipes m 390.6 390.6 100.0 False None None False None False 39060.0 0 3430164 121538 None code57 25 mm nominal dia Pipes m 310.8 310.8 120.0 False None None False None False 37296.0 0 3430165 121538 None code58 20 mm nominal dia Pipes m 227.85 227.85 80.0 False None None False None False 18228.0 0 3430166 121538 None code59 Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm. No 11025.0 11025.0 1.0 False None None False None False 11025.0 0 3430167 121538 None code60 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments 1.50 HP/1.1KW 12 STG No 16188.9 16188.9 1.0 False None None False None False 16188.9 0 3430168 121538 None code61 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm Sqm 843.15 843.15 418.6 False None None False None False 352942.59 0 3430169 121538 None code62 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately).Payment to be made per metre cost of total length of barbed wire used. With G.I.barbed wire. m 18.9 18.9 1899.0 False None None False None False 35891.1 0 3430170 121538 None code63 GI flat 50mm x 6mm & Bolts for SF Poles Kgs 351.75 351.75 1116.13 False None None False None False 392598.7275 0 3430171 121538 None code64 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 0 to 50 m - Water supply Upto 50.00 mtrs. m 388.5 388.5 50.0 False None None False None False 19425.0 0 3430172 121538 None code65 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc.complete. The cost excludes the cost of casing pipes, collars & caps etc.) for:Borewell depth of 50 to 100 m m 487.2 487.2 50.0 False None None False None False 24360.0 0 3430173 121538 None code66 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 100 to 150 m m 517.65 517.65 50.0 False None None False None False 25882.5 0 3430174 121538 None code67 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: Borewell depth of 150 to 200 m m 600.6 600.6 10.0 False None None False None False 6006.0 0 3430175 121538 None code68 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty m 2029.65 2029.65 20.0 False None None False None False 40593.0 0 3430176 121538 None code69 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 172.2 172.2 1.0 False None None False None False 172.2 0 3430177 121538 None code70 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3430178 121538 None code71 PUMPSET : Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For HP For 6.50 HP 6.50 HP - 90 LPM @ 132 m = 12 STG Outlet Dia - 2.00” Each 38554.95 38554.95 1.0 False None None False None False 38554.95 0 3430179 121538 None code72 SUBMERSIBLE CABLE: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m2 m 141.75 141.75 200.0 False None None False None False 28350.0 0 3430180 121538 None code73 PRESSURE GAUGE : Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm Each 686.7 686.7 1.0 False None None False None False 686.7 0 3430181 121538 None code74 GATE VALVE : Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm Each 1312.5 1312.5 2.0 False None None False None False 2625.0 0 3430182 121538 None code75 NON - RETURN VALVE : Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm Each 1312.5 1312.5 2.0 False None None False None False 2625.0 0 3430183 121538 None code76 ix) Control Panel BOARD-A: Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2)S-D- Star Delta Starter for outdoor Upto 6 HP pumps Each 16695.0 16695.0 1.0 False None None False None False 16695.0 0 3430184 121538 None code77 POWER CAPACITOR : Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 1.0 False None None False None False 577.5 0 3430185 121538 None code78 MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. Per 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3430186 121538 None code79 Erection elctrification & Commissioning works of pumpsets : Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3430187 121538 None code80 Ercerion of panel board & meter board Unit : Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1522.5 1522.5 1.0 False None None False None False 1522.5 0 3430188 121538 None code81 Main connections: Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. m 141.75 141.75 1.0 False None None False None False 141.75 0 3430189 121538 None code82 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 3937.5 3937.5 1.0 False None None False None False 3937.5 0 3430190 121538 None code83 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure. Sqm 186.17 186.17 3260.0 False None None False None False 606914.2 0 3430191 121538 None code84 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. PVC 160MM 10KG/M2 for Cable duct E & F Type m 1017.45 1017.45 50.0 False None None False None False 50872.5 0 3430192 121538 None code85 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 900 mm dia. for culvert m 5096.7 5096.7 12.5 False None None False None False 63708.75 0 3430193 121538 None code86 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box Each Point 282.45 282.45 10.0 False None None False None False 2824.5 0 3430194 121538 None code87 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Each Point 397.95 397.95 15.0 False None None False None False 5969.25 0 3430195 121538 None code88 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Each Point 582.75 582.75 15.0 False None None False None False 8741.25 0 3430196 121538 None code89 Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia.2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Per Mtr 81.9 81.9 150.0 False None None False None False 12285.0 0 3430197 121538 None code90 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way Each 134.4 134.4 15.0 False None None False None False 2016.0 0 3430198 121538 None code91 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 3/5 Way Each 154.35 154.35 15.0 False None None False None False 2315.25 0 3430199 121538 None code92 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch Each 342.3 342.3 10.0 False None None False None False 3423.0 0 3430200 121538 None code93 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 247.8 247.8 1.0 False None None False None False 247.8 0 3430201 121538 None code94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket Each 163.8 163.8 1.0 False None None False None False 163.8 0 3430202 121538 None code95 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm m 27.3 27.3 600.0 False None None False None False 16380.0 0 3430203 121538 None code96 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 44.1 44.1 450.0 False None None False None False 19845.0 0 3430204 121538 None code97 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm m 66.15 66.15 270.0 False None None False None False 17860.5 0 3430205 121538 None code98 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way Each 144.9 144.9 10.0 False None None False None False 1449.0 0 3430206 121538 None code99 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way Each 185.85 185.85 4.0 False None None False None False 743.4 0 3430207 121538 None code100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way Each 231.0 231.0 2.0 False None None False None False 462.0 0 3430208 121538 None code101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way Each 334.95 334.95 6.0 False None None False None False 2009.7 0 3430209 121538 None code102 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 2 Module Each 143.85 143.85 10.0 False None None False None False 1438.5 0 3430210 121538 None code103 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module Each 183.75 183.75 4.0 False None None False None False 735.0 0 3430211 121538 None code104 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module Each 245.7 245.7 2.0 False None None False None False 491.4 0 3430212 121538 None code105 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 10-12 Module Each 361.2 361.2 6.0 False None None False None False 2167.2 0 3430213 121538 None code106 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 189.0 189.0 10.0 False None None False None False 1890.0 0 3430214 121538 None code107 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote Each 258.3 258.3 1.0 False None None False None False 258.3 0 3430215 121538 None code108 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm) Each 3117.45 3117.45 4.0 False None None False None False 12469.8 0 3430216 121538 None code109 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48" Sweep (1200mm) Regular model Each 3133.2 3133.2 4.0 False None None False None False 12532.8 0 3430217 121538 None code110 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 4.0 False None None False None False 718.2 0 3430218 121538 None code111 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame Each 742.35 742.35 4.0 False None None False None False 2969.4 0 3430219 121538 None code112 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 374.85 374.85 4.0 False None None False None False 1499.4 0 3430220 121538 None code113 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosur - Double Door 12Way SP &N Each 2445.45 2445.45 1.0 False None None False None False 2445.45 0 3430221 121538 None code114 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., Made out of 14 SWG MS enclosur - Double Door 6 Way SP &N Each 1880.55 1880.55 1.0 False None None False None False 1880.55 0 3430222 121538 None code115 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP Each 435.75 435.75 1.0 False None None False None False 435.75 0 3430223 121538 None code116 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63A SP Each 851.55 851.55 1.0 False None None False None False 851.55 0 3430224 121538 None code117 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole Each 5404.35 5404.35 1.0 False None None False None False 5404.35 0 3430225 121538 None code118 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc., the pipe shall have 16 through holes of 12 mm dia. No 3685.5 3685.5 1.0 False None None False None False 3685.5 0 3430226 121538 None code119 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. Each 4468.8 4468.8 1.0 False None None False None False 4468.8 0 3430227 121538 None code120 GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate Each 7792.05 7792.05 1.0 False None None False None False 7792.05 0 3430228 121538 None code121 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. Copper wire. c) 8 SWG m 110.25 110.25 20.0 False None None False None False 2205.0 0 3430229 121538 None code123 Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board. Each 474.6 474.6 1.0 False None None False None False 474.6 0 3430230 121538 None code124 Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT) Each 504.0 504.0 1.0 False None None False None False 504.0 0 3430231 121538 None code125 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired Each 4609.5 4609.5 1.0 False None None False None False 4609.5 0 3430232 121538 None code126 Supplying, fixing and wiring rotary selector switch suitable for Ammeter. Each 210.0 210.0 1.0 False None None False None False 210.0 0 3430233 121538 None code127 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer class 0.5 accurecy with Tape Wound Each 590.1 590.1 1.0 False None None False None False 590.1 0 3430234 121538 None code128 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C Each 540.75 540.75 10.0 False None None False None False 5407.5 0 3430235 121538 None code129 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 9717.75 9717.75 1.0 False None None False None False 9717.75 0 3430236 121538 None code130 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Micro processor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism THREE POLE 200Amps 36kA Each 17892.0 17892.0 1.0 False None None False None False 17892.0 0 3430237 121538 None code131 Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps Each 6087.9 6087.9 1.0 False None None False None False 6087.9 0 3430238 121538 None code132 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire, manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. 40Watts Each 4225.2 4225.2 15.0 False None None False None False 63378.0 0 3430239 121538 None code133 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete - 16SWG Sq CM 0.45 0.45 2000.0 False None None False None False 900.0 0 3430240 121538 None code134 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 1332.45 1332.45 20.0 False None None False None False 26649.0 0 3430241 121538 None code135 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 578.55 578.55 5.0 False None None False None False 2892.75 0 3430242 121538 None code136 Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition Each 599.55 599.55 4.0 False None None False None False 2398.2 0 3430243 121538 None code137 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. Each 128.1 128.1 10.0 False None None False None False 1281.0 0 3430244 121538 None code54 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. And Providing & fixing cast iron cover with frame and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. Each 6507.9 6507.9 15.0 False None None False None False 97618.5 0 1719841727000 0 None None Electrical Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. (PART B1 Check survey to be conducted during construction stage) 17711658.1 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3430245 121539 None code001 Check survey to be conducted during construction stage: Labour charge for Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ordinates, submission of detailed line schedule, tower schedule, land schedule and comparing the same with respect to detailed survey report, bringing out the differences if any. Submission of contour maps for undulated / hilly tower. The work also includes marking corridor width in the field and computing the quantum of beaching and revetment, preparation of detailed land schedule at ong the corridor on the digitized Reven ue vi1lage maps indicating the Sy. Nos. falling within the corridor for the purpose of estimation of the land compensation, submission of detailed consolidated hatd copy of reports of check survey in 6 sets along with soft copy for approval in all types of terrain per Km. Per Km 3049.2 3049.2 1.076 False None None False None False 3280.9392 0 3430246 121539 None code02 Proposed 220/110KV MC Narrow Based Towers (M/s L&T Design): Material cost: Proposed 220/110KV MC Narrow Based Towers (M/s L&T Design) MD' Type Tower with Box Cross Arm with Stubs MS Nos 142296.0 142296.0 16.53 False None None False None False 2352152.88 0 3430247 121539 None code03 Material cost: Proposed 220/110KV MC Narrow Based Towers (M/s L&T Design) MD' Type Tower with Box Cross Arm with Stubs HT Nos 156271.5 156271.5 16.296 False None None False None False 2546600.364 0 3430248 121539 None code04 Labour charges: Proposed 220/110KV MC Narrow Based Towers (M/s L&T Design) MD' Type Tower with Box Cross Arm with Stubs MS Nos 6463.8 6463.8 16.53 False None None False None False 106846.614 0 3430249 121539 None code05 Labour charges: Proposed 220/110KV MC Narrow Based Towers (M/s L&T Design) MD' Type Tower with Box Cross Arm with Stubs HT Nos 6463.8 6463.8 16.296 False None None False None False 105334.0848 0 3430250 121539 None code06 Proposed 110KV DC Narrow Based Towers (KPTCL Design): Material cost: Proposed 110KV DC Narrow Based Towers of Normal, extension tower, 9th cross arm with stubs Nos 142296.0 142296.0 54.09 False None None False None False 7696790.64 0 3430251 121539 None code07 Labour charge: Proposed 110KV DC Narrow Based Towers of Normal, extension tower, 9th cross arm with stubs Nos 6463.8 6463.8 54.09 False None None False None False 349626.942 0 3430252 121539 None code08 Material cost: Supply of Galvanised Bolts , Nuts & washer MT 149919.0 149919.0 3.016 False None None False None False 452155.704 0 3430253 121539 None code09 Labour charge: Supply of Galvanised Bolts , Nuts & washer MT 6009.15 6009.15 3.016 False None None False None False 18123.5964 0 3430254 121539 None code10 Labour charge: Stub setting templates : Setting of stub templates and aligning,dismantling and transportation of templates from one location to the other location for 110 KV LS 931.35 931.35 8.0 False None None False None False 7450.8 0 3430255 121539 None code11 Setting of stub templates and aligning,dismantling and transportation of templates from one location to the other location for 220KV LS 1329.3 1329.3 2.0 False None None False None False 2658.6 0 3430256 121539 None code12 Tower Acessories: Labour charge: Supplying and fixing G.I. Angle iron 450 x 450(1 m length) with cleats, bolt & nuts as per specification and fixing above 0.5 m length each at inner and outer surface of the tower to facilitate running of barbed wire. Set 4327.05 4327.05 10.0 False None None False None False 43270.5 0 3430257 121539 None code13 Labour charge: Supplying and fixing Barbed wire Rmtr 79.8 79.8 1251.52 False None None False None False 99871.296 0 3430258 121539 None code14 Material cost:Number Plates No 333.9 333.9 10.0 False None None False None False 3339.0 0 3430259 121539 None code15 Labaour charge: Number Plates No 84.0 84.0 10.0 False None None False None False 840.0 0 3430260 121539 None code16 Material cost: Danger Boards No 333.9 333.9 10.0 False None None False None False 3339.0 0 3430261 121539 None code17 Labaour charge: Danger Boards No 84.0 84.0 10.0 False None None False None False 840.0 0 3430262 121539 None code18 Material cost: Phase plate (Set of 3 No.) No 277.2 277.2 10.0 False None None False None False 2772.0 0 3430263 121539 None code19 Labaour charge:Phase plate (Set of 3 No.) No 249.9 249.9 10.0 False None None False None False 2499.0 0 3430264 121539 None code20 Material cost: Circuit plate No 333.9 333.9 20.0 False None None False None False 6678.0 0 3430265 121539 None code21 Labaour charge: Circuit plate No 84.0 84.0 20.0 False None None False None False 1680.0 0 3430266 121539 None code22 Material cost: Earth bond 450 mm long No 564.9 564.9 10.0 False None None False None False 5649.0 0 3430267 121539 None code23 Material cost: Grounding of tower with GI Pipe including the cost of GI pipe, GI wire etc,. Set 54852.0 54852.0 10.0 False None None False None False 548520.0 0 3430268 121539 None code24 Labaour charge: Grounding of tower with GI Pipe including the cost of GI pipe, GI wire etc,. Set 2216.55 2216.55 10.0 False None None False None False 22165.5 0 3430269 121539 None code25 Conductor and Ground Wire:: Material cost:Lynx ACSR (In Plain terrain) Km 201600.0 201600.0 6.553 False None None False None False 1321084.8 0 3430270 121539 None code26 Labour charge: Lynx ACSR (In Plain terrain) Km 8400.0 8400.0 6.553 False None None False None False 55045.2 0 3430271 121539 None code27 Material cost: 7/3.15 mm Ground wire (In plain terrain) including Anchor tower Droppings Km 92400.0 92400.0 1.092 False None None False None False 100900.8 0 3430272 121539 None code28 Labour charge: 7/3.15 mm Ground wire (In plain terrain) including Anchor tower Droppings Km 11550.0 11550.0 1.092 False None None False None False 12612.6 0 3430273 121539 None code29 Material cost of Insulator strings and clamps for Lynx ACSR conductor with Hardware and Arcing horns.: Single Tension string of 90 KN Disc Insulators 8 units each along with hardware for Lynx ACSR and arcing horn Stack 6704.25 6704.25 126.0 False None None False None False 844735.5 0 3430274 121539 None code30 Double Tension string of 90 KN Disc Insulators 8 units each along with hard ware for Lynx ACSR and arcing horn Stack 14866.95 14866.95 24.0 False None None False None False 356806.8 0 3430275 121539 None code31 Single Suspension string of 90 KN Disc Insulators 7 units each.along with hardware for Lynx ACSR and arcing horn Stack 6451.2 6451.2 6.0 False None None False None False 38707.2 0 3430276 121539 None code32 Material cost of Accessories for Lynx ACSR Conductor: M S C Joints suitable for Lynx ACSR No 701.4 701.4 4.0 False None None False None False 2805.6 0 3430277 121539 None code33 Pre formed armour rods suitable for Lynx ACSR No 1326.15 1326.15 6.0 False None None False None False 7956.9 0 3430278 121539 None code34 Repair sleeves suitable for Lynx ACSR Nos 621.6 621.6 4.0 False None None False None False 2486.4 0 3430279 121539 None code35 P G Clamps suitable for LYNX ACSR Nos 814.8 814.8 150.0 False None None False None False 122220.0 0 3430280 121539 None code36 Vibration dampers for Lynx Nos 1064.7 1064.7 120.0 False None None False None False 127764.0 0 3430281 121539 None code37 Hardware & Accessories for Ground Wire.: Material cost of M S C Joints suitable for Ground conductor No 479.85 479.85 2.0 False None None False None False 959.7 0 3430282 121539 None code38 Material cost of Repair sleeves suitable for Ground conductor No 324.45 324.45 2.0 False None None False None False 648.9 0 3430283 121539 None code39 Material cost of P G Clamps suitable for GROUND ACSR Nos 423.15 423.15 10.0 False None None False None False 4231.5 0 3430284 121539 None code40 Material cost of Single Tension clamps (bolted type) suitable for Ground conductor Nos 1295.7 1295.7 10.0 False None None False None False 12957.0 0 3430285 121539 None code41 Labour charge of Tack welding of Bolts and Nuts (No of tower x 250) Nos 23.1 23.1 3000.0 False None None False None False 69300.0 0 3430286 121539 None code42 Labour charge of Releasing & Restringing of Existing Lynx ACSR Conductor and Releasing of existing tower, conductor and ground wire: Releasing of existing. MA-type, 1Nos of tower (8.2904MT per tower, i.e. 70% of MC A-type, M/s Ramachandra Rao design tower weight )-including the released Materials has to be returned to the nearest KPTCL Store. MT 6009.15 6009.15 5.8 False None None False None False 34853.07 0 3430287 121539 None code43 Releasing & Restringing of Existing Lynx ACSR Conductor from Existing AP to proposed LILO towers on both sides for a lentgh of 1.178Kms*9*1.015=10.761Kms [3 Cicuits ]- Release -8000 and Stringing-8000- total -16000/- Km 16800.0 16800.0 10.761 False None None False None False 180784.8 0 3430288 121539 None code44 Releasing & Restringing of Existing Ground Wire from Existing AP to proposed LILO towers on both sides for a lentgh of 1.178KmsKms*1*1.015=1.196Kms under LC Condition Km 23100.0 23100.0 1.196 False None None False None False 27627.6 0 3430289 121539 None code45 Labour charge of Clearing for bushes tree branches etc.,as per specification Km 4354.35 4354.35 1.076 False None None False None False 4685.2806 0 1719841728000 0 None None Electrical Establishing 2x10MVA, 110/11 KV Sub-station on the layout at Kotnoor-D Atal Bhihari Vajpayee Kalaburagi with construction of 110 KV LILO line from existing 110 KV Kalaburagi South to Kalaburagi West line for a distance of 1.076Kms for the work of Arranging power supply to an extent of 7488KVA (6365KW) for electrification of residential / Commercial layout at Sy No. 49, 66, 67, 68, 74, 76, 77, 96, 97 at Kotnoor-D Kalaburagi. (PART C ASSOCIATED CIVIL WORKS AND STRUCTURES) 7748725.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3430290 121540 None code01 Excavation for foundation (only labour) : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m- Cum 107.1 107.1 776.46 False None None False None False 83158.866 0 3430291 121540 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth.-Dry fissured/Ordinary rock upto 1.5m Cum 381.15 381.15 105.882 False None None False None False 40356.9243 0 3430292 121540 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth -Dry fissured/Ordinary rock upto 3.0m Cum 446.25 446.25 247.058 False None None False None False 110249.6325 0 3430293 121540 None code04 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock (requiring blasting) Depth upto 1.50m (KPWD SR 23-24 V1, Page.No.9 Item No.1.16.1)-Hard Rock/Hard laterite upto 1.5m Cum 581.7 581.7 21.177 False None None False None False 12318.6609 0 3430294 121540 None code05 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock ( requiring blasting) Depth exceeding 1.5 m, but not exceeding 3 m (KPWD SR 23-24 V1, Page.No.9 Item No.1.16.2)-Hard Rock/Hard laterite upto 3.0m Cum 654.15 654.15 49.413 False None None False None False 32323.51395 0 3430295 121540 None code06 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils upto 3.0 m depth with 5% with de-watering is assessed as per site condition (KPWD SR 23-24 V1, Page.No.8 Item No.1.14.1) -PSS/FSS upto 3.0m Cum 895.65 895.65 211.76 False None None False None False 189662.844 0 3430296 121540 None code07 Foundation Concreting : Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (V.1, I.No.2.1.4, P.No.15)-Concreting and curing 1 : 3 : 6 Cum 6527.85 6527.85 21.55 False None None False None False 140675.1675 0 3430297 121540 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation - Concreting and curing M20 Cum 6799.39 6799.39 613.6 False None None False None False 4172105.704 0 3430298 121540 None code09 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures -Steel reinforcement (including material and labour) MT 82960.5 82960.5 33.16 False None None False None False 2750970.18 0 3430299 121540 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -Back Filling Cum 279.3 279.3 776.6 False None None False None False 216904.38 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719841729000 1 None None ELIGIBILITY Tenders from Joint ventures are acceptable. None 1719841729000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719841729000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1719841729000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719841729000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719841752000 0 None None ELIGIBILITY All Terms and conditions as per Tender Document and Tender Notification None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work such as Construction of Electrical Sub-station Works of value not less than Rs 750.05 lakhs. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The bidder should have executed the works satisfactorily and commissioned more than one year for the following items involved in the work 1) Supplying, Testing and Commissioning of minimum 8 MVA and above capacity power transformers Nos. 01 2) Supply and Laying 66 KV EHV UG cable Km 01 3) Supplying and installation of 11 KV MCVCB Switch gears Nos.08 4) Construction of Control Room, compound wall Job 01 Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Bidder should posses conditioned road worthy vehicle or hired one. 1) Lorries/Tipper 01 Nos 2) Crane 01 Nos 3) Ladder mounted Jeep 01 Nos. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Machinery details None None None None Electrical license contractor valid Super grade issued from Chief Electrical Inspectorate of Karnataka Govt Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Electrical license None None None None Registration certificate of GST Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Registration certificate of GST None None None None Registration certificate issued from Provident Fund Authority (EPF) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Registration certificate issued from Provident Fund Authority (EPF) None None None None Registration certification of ESI. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Valid ESI certificate None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24) (a) Achieved in at least two financial years a minimum financial turnover (in all class of Electrical engineering construction works only) of Rs.3000.00 lakhs. (Not less than 2 times the amount put to tender) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Assets and liability amount equal to amount put to tender obtained from the C.A. (Rs 1500.11 lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- assets and liability None None None None Liquid assets and /or availability of credit facilities of not less than 25% of the amount put tender Rs 375.03 Lakhs (Credit lines/letter of credit/ certificates from any Nationalized/Scheduled banks Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText SCAN AND UPLOAD DOCUMENTS AS PER TENDER DOCUMENT AND NOTIFICATION True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719842713000 version 0 createdDate None modifiedDate None blockNumber KUDA OFFICE, MAIN ROAD BESIDE MINI VIDHAN SAUDHA street None city KALABURAGI state Karnataka pin 585102
tenderRecallDTO	None