createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719921484607 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 730.00 emd 29500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-07-2024 17:00:00 tenderQueryClose 08-07-2024 17:30:00 technicalBidOpen None publishedDate 03-07-2024 13:30:00 publishedByPost PWD_EE_DIV_CKD publishedByUser KPE15950 - SUNILKUMAR N BALOL bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Shri.Sunilkumar N Balol EE PWD Division Chikodi splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8338273859 mobileNumber 8338273859 tenderSupplierList None
tenderSchedule	createdTs 1719921484610 version 27 createdDate None modifiedDate None tenderNumber PWD/2024-25/BD/WORK_INDENT10939/CALL-2 title CONSTRUCTION OF TWO CLASS ROOMS FOR GOVT KANNADA HIGHER PRIMARY SCHOOL AT RADDERHATTI IN ATHANI CONSTITUENCY ATHANI TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS. description CONSTRUCTION OF TWO CLASS ROOMS FOR GOVT KANNADA HIGHER PRIMARY SCHOOL AT RADDERHATTI IN ATHANI CONSTITUENCY ATHANI TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS. category WORKS categoryText Works ecv 2903377.20 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1686 locationName PWD Division Office Chikkodi provisionalAmount 3600000.0 groupOverheadTotal 0.0 fileNumber KPWD/ATN/4059/GOVT/KHPS/RADDERHATTI/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719921485000 1 None None Buildings CONSTRUCTION OF TWO CLASS ROOMS FOR GOVT KANNADA HIGHER PRIMARY SCHOOL AT RADDERHATTI IN ATHANI CONSTITUENCY ATHANI TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS. 2750885.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437117 121858 None Vol.1, P.No.8,I.No.1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ( Vol.1, P.No.8,I.No.1.12) ---- including cost of all materials, labor ,HOM,l Cum 99.75 99.75 14.38 False None None False None False 1434.405 0 3437118 121858 None Vol.1, P.No.8,I.No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( Vol.1, P.No.8,I.No.1.14.1) ---- including cost of all materials, labor ,HOM,l Cum 107.1 107.1 90.64 False None None False None False 9707.544 0 3437119 121858 None Vol.1, P.No.15,I.No.2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.15,I.No.2.1.3) ---- including cost of all materials, labor ,HOM,l Cum 6288.45 6288.45 21.61 False None None False None False 135893.4045 0 3437120 121858 None Vol.2, P.No.5,I.No.4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ( Vol.2, P.No.5,I.No.4.1) ---- including cost of all materials, labor ,HOM,l Sqm 123.9 123.9 143.63 False None None False None False 17795.757 0 3437121 121858 None Vol.2, P.No.9,I.No.5.3 Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Vol.2, P.No.9,I.No.5.3) ---- including cost of all materials, labor ,HOM,l Cum 6515.25 6515.25 23.7 False None None False None False 154411.425 0 3437122 121858 None Volume 1 Page No 15-Item No 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork to be paid separately) (Volume 1 Page No 15-Item No 2.2.3) ---- including cost of all materials, labor ,HOM,l Cum 6652.8 6652.8 14.75 False None None False None False 98128.8 0 3437123 121858 None Vol.1, P.No.111, S.No.1a Formwark for Footings Isolated @ 8% (Vol.1, P.No.111, S.No.1a) ---- including cost of all materials, labor ,HOM,l Cum 532.23 532.23 14.75 False None None False None False 7850.3925 0 3437124 121858 None Vol.1, P.No.16, I.No.2.4.3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16, I.No.2.4.3) ---- including cost of all materials, labor ,HOM,l Cum 6652.8 6652.8 9.61 False None None False None False 63933.408 0 3437125 121858 None Vol.1, P.No.111, S.No.9 Formwark for Columns @ 70% (Vol.1, P.No.111, S.No.9) ---- including cost of all materials, labor ,HOM,l Cum 4656.96 4656.96 2.88 False None None False None False 13412.0448 0 3437126 121858 None Vol.1, P.No.111, S.No.2 Formwark for Plinth beams of Buildings @ 50% (Vol.1, P.No.111, S.No.2) ---- including cost of all materials, labor ,HOM,l Cum 3326.4 3326.4 6.73 False None None False None False 22386.672 0 3437127 121858 None Vol.1,P.No.7, I.No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( Vol.1,P.No.7, I.No.1.9) ---- including cost of all materials, labor ,HOM,l Cum 279.3 279.3 62.41 False None None False None False 17431.113 0 3437128 121858 None Vol.1, P.No.16,I.No.2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16,I.No.2.5.2) ---- including cost of all materials, labor ,HOM,l Cum 7185.15 7185.15 40.67 False None None False None False 292220.0505 0 3437129 121858 None Vol.1, P.No.111, S.No.9 Formwark for Columns @ 70% (Vol.1, P.No.111, S.No.9) ---- including cost of all materials, labor ,HOM,l Cum 5029.61 5029.61 7.2 False None None False None False 36213.192 0 3437130 121858 None Vol.1, P.No.112, S.No.14 Formwark for Beams & Lintels of Building @ 60% (Vol.1, P.No.112, S.No.14) ---- including cost of all materials, labor ,HOM,l Cum 4311.09 4311.09 7.91 False None None False None False 34100.7219 0 3437131 121858 None Vol.1, P.No.112, S.No.15 Formwark for Roof Slab of Building @ 50% (Vol.1, P.No.112, S.No.15) ---- including cost of all materials, labor ,HOM,l Cum 3592.58 3592.58 22.6 False None None False None False 81192.308 0 3437132 121858 None Vol.1, P.No.112, S.No.1 Formwark for Chejjas, Canopy & Other Architectural projections of minor sections @ 45% (Vol.1, P.No.112, S.No.1 ---- including cost of all materials, labor ,HOM,l Cum 3233.32 3233.32 2.96 False None None False None False 9570.6272 0 3437133 121858 None Vol.1, P.No.16, I.No.2.4.1 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16, I.No.2.4.1) ---- including cost of all materials, labor ,HOM,l Cum 6724.2 6724.2 2.14 False None None False None False 14389.788 0 3437134 121858 None Vol.1, P.No.18,I.No.2.11a Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (Vol.1, P.No.18,I.No.2.11a) ---- including cost of all materials, labor ,HOM,l t 93929.85 93929.85 6.0 False None None False None False 563579.1 0 3437135 121858 None Vol.2 P.No.14, I. No. 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(Vol.2 P.No.14, I. No. 6.8) ---- including cost of all materials, labor ,HOM,l Cum 8367.45 8367.45 35.34 False None None False None False 295705.683 0 3437136 121858 None Volume 2 Page No 99 Item No 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(Volume 2 Page No 99 Item No 12.11) ---- including cost of all materials, labor ,HOM,l Cum 144977.7 144977.7 0.203 False None None False None False 29430.4731 0 3437137 121858 None Vol. 2, P. No.105, I.No.12.57.8 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 40 mm thick one side teak and one side commercial.(Vol. 2, P. No.105, I.No.12.57.8) ---- including cost of all materials, labor ,HOM,l Sqm 4515.0 4515.0 10.08 False None None False None False 45511.2 0 3437138 121858 None Vol. 2, P.No. 63, I. No.9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent (Vol. 2, P.No. 63, I. No.9.24) ---- including cost of all materials, labor ,HOM,l Sqm 2994.6 2994.6 11.52 False None None False None False 34497.792 0 3437139 121858 None Vol. 2, P.No.108, I.No.12.84 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made (Vol. 2, P.No.108, I.No.12.84) ---- including cost of all materials, labor ,HOM,l Sqm 5274.15 5274.15 8.64 False None None False None False 45568.656 0 3437140 121858 None Vol. 2 Material component S.No.394, P.No. A-24 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (Vol. 2 Material component S.No.394, P.No. A-24) ---- including cost of all materials, labor ,HOM,l Sqm 280.0 280.0 12.96 False None None False None False 3628.8 0 3437141 121858 None Vol.2, P.No.86, I.No.11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Vol.2, P.No.86, I.No.11.34B) ---- including cost of all materials, labor ,HOM,l Kgs 192.15 192.15 233.28 False None None False None False 44824.752 0 3437142 121858 None Vol.2, P.No.61, I.No.9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm ---- including cost of all materials, labor ,HOM,l Sqm 1202.25 1202.25 67.96 False None None False None False 81704.91 0 3437143 121858 None Vol.2, P.No.41, I.No.8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.41, I.No.8.1.1) ---- including cost of all materials, labor ,HOM,l Sqm 267.75 267.75 295.38 False None None False None False 79087.995 0 3437144 121858 None Vol.2, P.No.50, I.No.8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Vol.2, P.No.50, I.No.8.51) ---- including cost of all materials, labor ,HOM,l Sqm 105.0 105.0 235.38 False None None False None False 24714.9 0 3437145 121858 None Vol.2, P.No.42, I.No.8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Vol.2, P.No.42, I.No.8.8 ) ---- including cost of all materials, labor ,HOM,l Sqm 389.55 389.55 229.23 False None None False None False 89296.5465 0 3437146 121858 None Vol.2, P.No.64, I.No.9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (Vol.2, P.No.64, I.No.9.36) ---- including cost of all materials, labor ,HOM,l Sqm 1732.5 1732.5 6.21 False None None False None False 10758.825 0 3437147 121858 None Vol.2, P.No.47, I.No.8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.47, I.No.8.33.3) ---- including cost of all materials, labor ,HOM,l Sqm 145.95 145.95 8.64 False None None False None False 1261.008 0 3437148 121858 None Vol.2, P.No.46, I.No.8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.46, I.No.8.33.2) ---- including cost of all materials, labor ,HOM,l Sqm 144.9 144.9 32.26 False None None False None False 4674.474 0 3437149 121858 None Vol.2, P.No.46, I.No.8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.30) ---- including cost of all materials, labor ,HOM,l Sqm 182.7 182.7 335.16 False None None False None False 61233.732 0 3437150 121858 None Vol.2, P.No.46, I.No.8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.33.1) ---- including cost of all materials, labor ,HOM,l Sqm 165.9 165.9 235.38 False None None False None False 39049.542 0 3437151 121858 None Vol.2,P. No.105, I.No.12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(Vol.2,P. No.105, I.No.12.51) ---- including cost of all materials, labor ,HOM,l Nos 1066.8 1066.8 4.0 False None None False None False 4267.2 0 3437152 121858 None Vol.5,P.No.125,I.No.13.48 Providing and fixing on the wall face unplastisized rigid PVC rain water pipes confirmimg to IS:13592 Type A including jointing with seal ring confirmimg to IS:5382, leaving 10mm gap for thermal expansion, single socketed pipes 100mm diameter. ( Vol.5,P.No.125,I.No.13.48) ---- including cost of all materials, labor ,HOM,l m 305.55 305.55 22.5 False None None False None False 6874.875 0 3437153 121858 None Vol.2, P.No.84, I.No.11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. (Vol.2, P.No.84, I.No.11.26.1) ---- including cost of all materials, labor ,HOM,l Kgs 144.9 144.9 175.0 False None None False None False 25357.5 0 3437154 121858 None Vol.2, P.No.149, I.No.15.1 Polyurethane based Single Component for New Surface: Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Vol.2, P.No.149, I.No.15.1) ---- including cost of all materials, labor ,HOM,l Sqm 857.85 857.85 115.99 False None None False None False 99502.0215 0 3437155 121858 None Quotation rate Providing and fixing Green board for class room (Quotation rate) ---- including cost of all materials, labor ,HOM,l Each 8136.0 8136.0 4.0 False None None False None False 32544.0 0 3437156 121858 None Vol.2, P.No.200, I.No.20.34.1 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) (Vol.2, P.No.200, I.No.20.34.1) ---- including cost of all materials, labor ,HOM,l No 178.5 178.5 12.0 False None None False None False 2142.0 0 3437157 121858 None Vol.2, P.No.A-25, S.No.444 Hold fasts (Vol.2, P.No.A-25, S.No.444) ---- including cost of all materials, labor ,HOM,l Nos 50.0 50.0 24.0 False None None False None False 1200.0 0 3437158 121858 None Vol.2, P.No.107, I.No.12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm (Vol.2, P.No.107, I.No.12.73.1) ---- including cost of all materials, labor ,HOM,l No 46.2 46.2 8.0 False None None False None False 369.6 0 3437159 121858 None Vol.2, P.No.105, I.No.12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Vol.2, P.No.105, I.No.12.60) ---- including cost of all materials, labor ,HOM,l No 1104.6 1104.6 4.0 False None None False None False 4418.4 0 3437160 121858 None Vol.2, P.No.107, I.No.12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (Vol.2, P.No.107, I.No.12.63) ---- including cost of all materials, labor ,HOM,l Nos 136.5 136.5 8.0 False None None False None False 1092.0 0 3437161 121858 None Vol.2, P.No.63, I.No.9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. (Vol. 2, P.No. 63, I. No.9.23) ---- including cost of all materials, labor ,HOM,l Sqm 2589.3 2589.3 41.91 False None None False None False 108517.563 0 1719921485000 0 None None Buildings ELECTRICAL ESTIMATE 85452.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437162 121859 None 1.8.2 Supplying and fixing of PVC casing and capping on the wall or ceilingusing necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. ---- including cost of all materials, labor ,HOM,l Mtr 35.0 35.0 160.0 False None None False None False 5600.0 0 3437163 121859 None 1.6.5 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete ---- including cost of all materials, labor ,HOM,l Each 74.0 74.0 16.0 False None None False None False 1184.0 0 3437164 121859 None 2.1.2 Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. ---- including cost of all materials, labor ,HOM,l Point 394.0 394.0 8.0 False None None False None False 3152.0 0 3437165 121859 None 2.1.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via switch ---- including cost of all materials, labor ,HOM,l Point 570.0 570.0 8.0 False None None False None False 4560.0 0 3437166 121859 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.1.5MSQM ---- including cost of all materials, labor ,HOM,l Mtr 26.0 26.0 250.0 False None None False None False 6500.0 0 3437167 121859 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.2.5MSQM ---- including cost of all materials, labor ,HOM,l Mtr 42.0 42.0 30.0 False None None False None False 1260.0 0 3437168 121859 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.4MSQM ---- including cost of all materials, labor ,HOM,l Mtr 63.0 63.0 150.0 False None None False None False 9450.0 0 3437169 121859 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1.2 WAY ---- including cost of all materials, labor ,HOM,l Each 138.0 138.0 6.0 False None None False None False 828.0 0 3437170 121859 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 WAY ---- including cost of all materials, labor ,HOM,l Mtr 261.0 261.0 2.0 False None None False None False 522.0 0 3437171 121859 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 WAY ---- including cost of all materials, labor ,HOM,l Each 319.0 319.0 10.0 False None None False None False 3190.0 0 3437172 121859 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 TO 2 MODULE ---- including cost of all materials, labor ,HOM,l Each 137.0 137.0 6.0 False None None False None False 822.0 0 3437173 121859 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 MOUDULE ---- including cost of all materials, labor ,HOM,l Each 284.0 284.0 2.0 False None None False None False 568.0 0 3437174 121859 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 MOUDULE ---- including cost of all materials, labor ,HOM,l Each 344.0 344.0 4.0 False None None False None False 1376.0 0 3437175 121859 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A one way switch ---- including cost of all materials, labor ,HOM,l Each 102.0 102.0 32.0 False None None False None False 3264.0 0 3437176 121859 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan regulator two moudule ---- including cost of all materials, labor ,HOM,l Each 357.0 357.0 4.0 False None None False None False 1428.0 0 3437177 121859 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A one way switch ---- including cost of all materials, labor ,HOM,l Each 180.0 180.0 12.0 False None None False None False 2160.0 0 3437178 121859 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch ---- including cost of all materials, labor ,HOM,l Each 326.0 326.0 4.0 False None None False None False 1304.0 0 3437179 121859 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A universal socket ---- including cost of all materials, labor ,HOM,l Each 236.0 236.0 8.0 False None None False None False 1888.0 0 3437180 121859 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 threeway socket ---- including cost of all materials, labor ,HOM,l Each 171.0 171.0 8.0 False None None False None False 1368.0 0 3437181 121859 None 11.3.2 Supplying of .feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED LIGHT FITTING ---- including cost of all materials, labor ,HOM,l Each 690.0 690.0 16.0 False None None False None False 11040.0 0 3437182 121859 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32AMPS ---- including cost of all materials, labor ,HOM,l Each 241.0 241.0 2.0 False None None False None False 482.0 0 3437183 121859 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 a SP ---- including cost of all materials, labor ,HOM,l Each 415.0 415.0 2.0 False None None False None False 830.0 0 3437184 121859 None 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP ---- including cost of all materials, labor ,HOM,l Each 739.0 739.0 2.0 False None None False None False 1478.0 0 3437185 121859 None 5.19.6 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II Double door ---- including cost of all materials, labor ,HOM,l Each 1524.0 1524.0 2.0 False None None False None False 3048.0 0 3437186 121859 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia. ---- including cost of all materials, labor ,HOM,l No 3510.0 3510.0 1.0 False None None False None False 3510.0 0 3437187 121859 None 6.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 56 sweep(1400mm) Regular ---- including cost of all materials, labor ,HOM,l Each 3031.0 3031.0 4.0 False None None False None False 12124.0 0 3437188 121859 None 5.6.1 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 8*6*1.5 ---- including cost of all materials, labor ,HOM,l Each 87.0 87.0 2.0 False None None False None False 174.0 0 3437189 121859 None 5.6.4 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 12*12*2 ---- including cost of all materials, labor ,HOM,l Each 181.0 181.0 2.0 False None None False None False 362.0 0 3437190 121859 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. on wall/ceiling/Rafter ---- including cost of all materials, labor ,HOM,l Each 122.0 122.0 10.0 False None None False None False 1220.0 0 3437191 121859 None 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- including cost of all materials, labor ,HOM,l Each 171.0 171.0 4.0 False None None False None False 684.0 0 3437192 121859 None 1.9.1 Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. 20mm ---- including cost of all materials, labor ,HOM,l Mtr 19.0 19.0 4.0 False None None False None False 76.0 0 1719921485000 0 None None Buildings Furnitures Table and Chair 67040.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437193 121860 None KSFIC DWD 052 Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H - Shape patti. Table shall be neatly finished and polished. ---- including cost of all materials, labor ,HOM,l No 23540.0 23540.0 2.0 False None None False None False 47080.0 0 3437194 121860 None KSFIC DWD 063 Teak wood Chair (Heavy model): Seat with taek wood planks or cushion. Made out of teak wood chair 3''x1.25'' back legs 2.25''x2.25'' front legs chair side side bars 3''x1.25'' back with 8 reapers. Chair size standard size. Chair shall be neatly finished and polished. ---- including cost of all materials, labor ,HOM,l No 9980.0 9980.0 2.0 False None None False None False 19960.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719921485000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719921485000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719921485000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1719921485000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719921485000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719921485000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1719921485000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end None 1719921485000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1719921485000 0 None None ELIGIBILITY As per karnataka state government order LD/300/LET/2006 Bangalore dated 01-01-2007 and Govt letter No.PW/134/BMS /2007/dated 27-07-2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. None 1719921485000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders None 1719921485000 0 None None ELIGIBILITY All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original. None 1719921485000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1719921485000 0 None None ELIGIBILITY All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose. None 1719921485000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1719921485000 0 None None ELIGIBILITY Tenderers are requested to read the Bid Documents before submission of their bid. None 1719921485000 0 None None ELIGIBILITY Department will not supply any materials. None 1719921485000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable. None 1719921485000 0 None None ELIGIBILITY The employer is not responsible for any delay in accessing KPPP Portal None 1719921485000 0 None None ELIGIBILITY The Employer reserves the rights reject one or all tender without assigning any reasons None 1719921485000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Chikodi during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned. None 1719921485000 0 None None ELIGIBILITY The Tenderer are should be present during opening of the tender and also submit the uploaded documents duly attested by the Gazetted Officer not below the Rank of Executive Engineer. None 1719921485000 0 None None ELIGIBILITY Contractors should Registered in KPWD and copy should be uploaded in KPPP Attested by the Gazzeted officers not below the rank of Executive Engineer. None 1719921485000 0 None None ELIGIBILITY GST shall be paid to the tendered amount seperately. None 1719921485000 0 None None ELIGIBILITY The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1719921485000 0 None None ELIGIBILITY Work Completion/Execution Period : 4 months Including Mansoon None 1719921485000 0 None None ELIGIBILITY The Project Completion period is 4 months and the Tenderer should maintain work during the defect liability period, which is (1) One year after successful completion of the work. None 1719921485000 0 None None ELIGIBILITY Difference amount should submit at the time of Agreement. None 1719921485000 0 None None ELIGIBILITY Financial turover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section None 1719921485000 0 None None ELIGIBILITY If no bid received auto extension will be done by KPPP Portal itself for 2 days None 1719921485000 0 None None ELIGIBILITY The cost of steel reinforcement & formwork shall be paid separately for concrete items only None 1719921485000 0 None None ELIGIBILITY Unique Document Identification Number (UDIN) form practicing Chartered Account is preferred None 1719921485000 0 None None ELIGIBILITY The Tenderer shall achieved in at least one financial years an average annual financial turnover from financial year 2019-20 to 2023-24 of Rs.29.03 Lakhs (not less than the estimated cost under this contract) None 1719921485000 0 None None ELIGIBILITY The Tenderer shall obtain any civil construction work the workdone certificate from financial year 2019-20 to 2023-24 (25% of the Amount Put to Tender i.e., Rs.7.26 Lakhs) in the prescribed format from the Competent Authority not below the rank of Executive Engieer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid. None 1719921485000 0 None None ELIGIBILITY The EMD of Rs.29,500.00/- shall be paid in full through e-payment in favour of Executive Engineer, PWD, Chikodi Dn, Chikodi None 1719921485000 0 None None ELIGIBILITY For SC contractors reservation category participate in the tender, the contractors should upload the domicile certificate stayed in KARNATAKA for minimum of 10 years issued by a competent authority / Tahsildar None 1719921485000 0 None None ELIGIBILITY This Tender is invited for the Tenderers belonging to Scheduled Caste category only & to claim this reservation Schedule Caste category certificate issued by the competent authority should be uploaded & should be submitted in original before tender opening. None 1719921485000 0 None None ELIGIBILITY If the Contractor is a firm, then all the partners or members of the firm shall belong to the Scheduled Caste or Scheduled Tribe as the case may be None 1719921485000 0 None None ELIGIBILITY This tender is reserved for Scheduled Caste (SC) Contractors only. None 1719921485000 0 None None ELIGIBILITY As per Government Circular No. FD/263/EXP-12/2022,Dated 11/05/2022 L1 tenderer EMD amount is forfeited and tender will be rejected None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Contractors KPWD Civil Registration Certificate True Technical Bid Annual Turn Over Certificate from 2019-20 to 2023-24 True Technical Bid Financial Work Done Certificate 25 percentage of APT True Technical Bid SC Caste Certificate True Technical Bid Domicile/ Residential certificate stayed a minimum of 10 years True Technical Bid GST Registratation True Technical Bid Ongoing work details True Technical Bid Any other related documents True Technical Bid UDIN form practicing Chartered Account is preferred True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None