createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1719924156293 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 960000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-07-2024 16:00:00 tenderQueryClose 08-07-2024 11:00:00 technicalBidOpen 15-07-2024 16:30:00 publishedDate 02-07-2024 18:22:56 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate 09-07-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Gnanesh Kumar V P splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843360 tenderSupplierList None
tenderSchedule	createdTs 1719924156295 version 11 createdDate None modifiedDate None tenderNumber EWHFWD/2024-25/BD/WORK_INDENT390/CALL-2 title Construction of Radiology Block in the premises of District Hospital, Chikkaballapura description Construction of Radiology Block in the premises of District Hospital, Chikkaballapura category WORKS categoryText Works ecv 63486291.85 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 82000000.0 groupOverheadTotal 0.0 fileNumber AEE/HFWD/KOLAR/AE1/DHCBPUR/RADIOLOGY
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1719924156000 0 None None Buildings 01 Civil Works 46676698.49 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437517 121886 None 2.5A pg7 V3 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil Not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle ---- etc., complete with all lead Sqm 404.79 404.79 13.8 False None None False None False 5586.102 0 3437518 121886 None 1.12 pg8 V1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth Not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- etc., complete with all lead Cum 97.85 97.85 276.08 False None None False None False 27014.428 0 3437519 121886 None 1.14.1 pg8 V1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. In all kinds of soils Depth upto 3 m Note: Cost of De-watering upto 5 % of (A+B) may be added, where required assessment for dewatering shall be made as per site condition (19848.48/240=82.70*5%=4.14/-) ---- etc., complete with all lead Cum 109.32 109.32 2908.95 False None None False None False 318006.414 0 3437520 121886 None 1.15.1 pg8 V1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 389.02 389.02 105.88 False None None False None False 41189.4376 0 3437521 121886 None 1.15.2 pg8 V1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but Not exceeding 3 m ---- etc., complete with all lead Cum 464.36 464.36 161.61 False None None False None False 75045.2196 0 3437522 121886 None 1.1A pg3 V3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kankar/ Moorum. (Disposal of 10Km) ---- etc., complete with all lead Cum 139.05 139.05 1771.97 False None None False None False 246392.4285 0 3437523 121886 None 4.1 pg5 V2 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Sqm 121.54 121.54 1022.4 False None None False None False 124262.496 0 3437524 121886 None 1.9 pg7 V1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 273.98 273.98 1482.32 False None None False None False 406126.0336 0 3437525 121886 None 1.8 pg7 V1 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 488.22 488.22 2274.94 False None None False None False 1110671.2068 0 3437526 121886 None 2.1.3 pg15 V1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers Not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm Nominal size graded crushed coarse aggregates. ---- etc., complete with all lead Cum 6353.73 6353.73 279.29 False None None False None False 1774533.2517 0 3437527 121886 None 2.2.1 pg15 V1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates FOOTINGS ---- etc., complete with all lead Cum 6993.66 6993.66 632.42 False None None False None False 4422930.4572 0 3437528 121886 None 2.2.1 pg15 V1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates PEDESTAL ---- etc., complete with all lead Cum 7123.17 7123.17 22.54 False None None False None False 160556.2518 0 3437529 121886 None 2.2.1 pg15 V1 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates GRADE SLAB ---- etc., complete with all lead Cum 6669.88 6669.88 102.24 False None None False None False 681928.5312 0 3437530 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates COLUMNS ---- etc., complete with all lead Cum 11982.09 11982.09 83.19 False None None False None False 996790.0671 0 3437531 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates GROUND FLOOR ---- etc., complete with all lead Cum 10572.44 10572.44 96.78 False None None False None False 1023200.7432 0 3437532 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates RCC BEAMS ---- etc., complete with all lead Cum 11277.44 11277.44 96.71 False None None False None False 1090641.2224 0 3437533 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates RCC SLAB ---- etc., complete with all lead Cum 10572.44 10572.44 142.6 False None None False None False 1507629.944 0 3437534 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates LINTELS ---- etc., complete with all lead Cum 11277.26 11277.26 2.99 False None None False None False 33719.0074 0 3437535 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates RCC STAIRCASE ---- etc., complete with all lead Cum 10572.44 10572.44 6.93 False None None False None False 73267.0092 0 3437536 121886 None 2.5.1 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates GROUND FLOOR ---- etc., complete with all lead Cum 9901.91 9901.91 7.57 False None None False None False 74957.4587 0 3437537 121886 None 8.16 a pg43 V2 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. GROUND FLOOR ---- etc., complete with all lead Sqm 1275.14 1275.14 4.73 False None None False None False 6031.4122 0 3437538 121886 None 2.11 a pg18 V1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead t 92140.71 92140.71 115.71 False None None False None False 10661601.5541 0 3437539 121886 None 5.4 pg9 V2 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead Cum 6580.67 6580.67 8.39 False None None False None False 55211.8213 0 3437540 121886 None 6.5 pg13 V2 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead Cum 11306.31 11306.31 83.37 False None None False None False 942607.0647 0 3437541 121886 None 6.32 pg17 V2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800KG/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1349.3 1349.3 1486.72 False None None False None False 2006031.296 0 3437542 121886 None 6.34 pg17 V2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800KG/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1137.12 1137.12 16.59 False None None False None False 18864.8208 0 3437543 121886 None 12.13.1 pg100 V2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 101779.45 101779.45 1.59 False None None False None False 161829.3255 0 3437544 121886 None 12.51 pg105 V2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead No 1046.48 1046.48 21.0 False None None False None False 21976.08 0 3437545 121886 None 22.15.2 pg218 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete with all lead No 566.5 566.5 42.0 False None None False None False 23793.0 0 3437546 121886 None 22.15.4 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete with all lead No 386.25 386.25 21.0 False None None False None False 8111.25 0 3437547 121886 None 22.15.6 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete with all lead No 154.5 154.5 37.0 False None None False None False 5716.5 0 3437548 121886 None 22.15.9 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete with all lead No 72.1 72.1 79.0 False None None False None False 5695.9 0 3437549 121886 None 22.15.10 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete with all lead No 103.0 103.0 16.0 False None None False None False 1648.0 0 3437550 121886 None 12.6 pg105 V2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1083.56 1083.56 7.0 False None None False None False 7584.92 0 3437551 121886 None 10.6.3 pg69 V2 Providing and fixing expansion hold fasteners on C.C. R.C.C. Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead No 61.8 61.8 126.0 False None None False None False 7786.8 0 3437552 121886 None 12.57.4 pg106 V2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid pheNol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side Teak ---- etc., complete with all lead Sqm 4667.96 4667.96 67.2 False None None False None False 313686.912 0 3437553 121886 None 12.9 pg110 V2 Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for miNor T&P's shall Not be made ---- etc., complete with all lead Sqm 6936.02 6936.02 50.4 False None None False None False 349575.408 0 3437554 121886 None 12.85 pg109 V2 Providing & fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.The cost is inclusive of all fixtures and separate charges for miNor T&P's shall Not be made ---- etc., complete with all lead Sqm 5890.57 5890.57 13.86 False None None False None False 81643.3002 0 3437555 121886 None 11.34A pg86 V2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 173.04 173.04 1349.46 False None None False None False 233510.5584 0 3437556 121886 None 12.93.1 pg111 V2 Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 5860 Suspension Grade, calcium carbonate and natural fibres wood powder/rice husk/ wheat husk and Non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 KG/m3, screw withdrawal strength of 2200 N Face & 1100 N Edge, minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of EngineerInCharge. Fixtures shall be paid for separatelySize 62 x 100mm ---- etc., complete with all lead m 723.06 723.06 66.3 False None None False None False 47938.878 0 3437557 121886 None 12.94.1 pg112 V2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 5860 Suspension Grade, calcium carbonate and natural fibers wood powder/rice husk/wheat husk and Non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 KG/m3 and screw withdrawal strength of 1800 N Face & 900 N Edge, minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.Cost of Fixtures to be paid separately30 mm thickness ---- etc., complete with all lead Sqm 3589.55 3589.55 24.57 False None None False None False 88195.2435 0 3437558 121886 None 12.59 pg107 V2 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 KG and door width upto 700 mm, with necessary accessories and screws etc. complete. ---- etc., complete with all lead No 1147.42 1147.42 21.0 False None None False None False 24095.82 0 3437559 121886 None 11.25.2 pg109 V2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ---- etc., complete with all lead Kg 140.08 140.08 241.92 False None None False None False 33888.1536 0 3437560 121886 None 8.4.2 pg41 V2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Inside ---- etc., complete with all lead Sqm 321.36 321.36 2284.81 False None None False None False 734246.5416 0 3437561 121886 None 8.1 pg43 V2 Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 217.56 217.56 1707.56 False None None False None False 371496.7536 0 3437562 121886 None 8.51 pg50 V2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 103.0 103.0 3993.37 False None None False None False 411317.11 0 3437563 121886 None 8.5.2 pg42 V2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Outside ---- etc., complete with all lead Sqm 359.47 359.47 617.82 False None None False None False 222087.7554 0 3437564 121886 None 8.16.2 pg43 V2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of Nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete with all lead Rmtr 39.14 39.14 972.0 False None None False None False 38044.08 0 3437565 121886 None 8.79 pg54 V2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineerincharge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead Rmtr 53.56 53.56 560.0 False None None False None False 29993.6 0 3437566 121886 None 9.17.2 pg61 V2 Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand, jointing with grey cement slurry @ 3.3 KG/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1210.25 1210.25 868.71 False None None False None False 1051356.2775 0 3437567 121886 None 8.2.1 pg41 V2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 303.85 303.85 612.6 False None None False None False 186138.51 0 3437568 121886 None 9.3 pg63 V2 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications ---- etc., complete with all lead Sqm 5487.84 5487.84 69.45 False None None False None False 381130.488 0 3437569 121886 None 9.32 pg64 V2 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the EngineerinCharge ---- etc., complete with all lead Sqm 2659.46 2659.46 77.52 False None None False None False 206161.3392 0 3437570 121886 None 9.29 pg63 V2 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 4435.18 4435.18 23.58 False None None False None False 104581.5444 0 3437571 121886 None 15.7 pg150 V2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, selfseal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydrostatic pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 KG/bag of cement. For calculation purpose 320 KG of Cement for M20 grade of Concrete is considered in the analysis ---- etc., complete with all lead Sqm 633.45 633.45 65.64 False None None False None False 41579.658 0 3437572 121886 None 9.11 pg60 V2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand, jointing with grey cement slurry @ 3.3 KG/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 915.67 915.67 65.64 False None None False None False 60104.5788 0 3437573 121886 None 9.39 pg65 V2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1492.47 1492.47 543.15 False None None False None False 810635.0805 0 3437574 121886 None 8.39 pg48 V2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 130.81 130.81 1707.56 False None None False None False 223365.9236 0 3437575 121886 None 8.32 pg46 V2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted with silicon additives, New work Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 160.68 160.68 617.82 False None None False None False 99271.3176 0 3437576 121886 None 8.34.3 pg47 V2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 51.5 51.5 64.26 False None None False None False 3309.39 0 3437577 121886 None 8.4 pg48 V2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 118.45 118.45 64.26 False None None False None False 7611.597 0 3437578 121886 None 8.34.1 pg46 V2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work hard and soft wood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 54.59 54.59 161.28 False None None False None False 8804.2752 0 3437579 121886 None 8.47 pg49 V2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 139.05 139.05 161.28 False None None False None False 22425.984 0 3437580 121886 None 11.28 pg85 V2 Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ---- etc., complete with all lead Kg 581.95 581.95 179.34 False None None False None False 104366.913 0 3437581 121886 None 10.19 pg72 V2 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. ---- etc., complete with all lead Sqm 3715.21 3715.21 8.16 False None None False None False 30316.1136 0 3437582 121886 None 9.25 pg63 V2 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerincharge. ---- etc., complete with all lead Sqm 824.0 824.0 129.0 False None None False None False 106296.0 0 3437583 121886 None Data Rate Providing and Laying French drain in Basement/Sub structure Subsurface drains 160mm dia HDPE perforated pipes with geotextile membrane with all types of fittings including excavation and laying of aggregates and finishing GSB/WMM including cost of materials, labour, HOM complete as per specifications. SubSurcafe drains ---- etc., complete with all lead m 2955.0 2955.0 352.0 False None None False None False 1040160.0 0 3437584 121886 None Approved Rate The Tenderer agency should arrange to obtain get, detailed Architectural drawings and elevations, Structural designs and drawings including proof checking by IISC /IIT/NIT only as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, Internal and External Electrical services including electrical infrastructure, Lifts, HVAC interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in scheduleB shall be paid on prorate basis of the main work or by negotiation with the employer. Consultancy Charges For Architectural, Structural, & DPR Charges 1% ---- etc., complete with all lead Job 609087.0 609087.0 1.0 False None None False None False 609087.0 0 3437585 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates COLUMNS ---- etc., complete with all lead Cum 12101.91 12101.91 28.84 False None None False None False 349019.0844 0 3437586 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates RCC BEAMS ---- etc., complete with all lead Cum 11390.04 11390.04 44.45 False None None False None False 506287.278 0 3437587 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates RCC SLAB ---- etc., complete with all lead Cum 10678.16 10678.16 59.09 False None None False None False 630972.4744 0 3437588 121886 None 2.5.2 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates LINTELS ---- etc., complete with all lead Cum 11390.04 11390.04 1.28 False None None False None False 14579.2512 0 3437589 121886 None 2.5.1 pg16 V1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm Nominal size graded crushed coarse aggregates FIRST FLOOR ---- etc., complete with all lead Cum 10000.92 10000.92 4.23 False None None False None False 42303.8916 0 3437590 121886 None 2.11 a pg18 V1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead t 93062.12 93062.12 21.16 False None None False None False 1969194.4592 0 3437591 121886 None 6.5 pg13 V2 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 1 cement : 6 coarse sand With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead Cum 11419.37 11419.37 19.04 False None None False None False 217424.8048 0 3437592 121886 None 6.32 pg17 V2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800KG/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1362.79 1362.79 731.88 False None None False None False 997398.7452 0 3437593 121886 None 6.34 pg17 V2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800KG/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1148.49 1148.49 20.01 False None None False None False 22981.2849 0 3437594 121886 None 12.13.1 pg100 V2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps, but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 102797.95 102797.95 0.8 False None None False None False 82238.36 0 3437595 121886 None 12.51 pg105 V2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead No 1056.95 1056.95 8.0 False None None False None False 8455.6 0 3437596 121886 None 22.15.2 pg218 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete with all lead No 572.17 572.17 16.0 False None None False None False 9154.72 0 3437597 121886 None 22.15.4 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete with all lead No 390.11 390.11 8.0 False None None False None False 3120.88 0 3437598 121886 None 22.15.6 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete with all lead No 156.05 156.05 11.0 False None None False None False 1716.55 0 3437599 121886 None 22.15.9 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete with all lead No 72.82 72.82 27.0 False None None False None False 1966.14 0 3437600 121886 None 22.15.10 pg219 V2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete with all lead No 104.03 104.03 3.0 False None None False None False 312.09 0 3437601 121886 None 12.6 pg105 V2 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1094.4 1094.4 3.0 False None None False None False 3283.2 0 3437602 121886 None 10.6.3 pg69 V2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead No 62.42 62.42 48.0 False None None False None False 2996.16 0 3437603 121886 None 12.57.4 pg106 V2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid pheNol formaldehyde resin as per IS specifications 2202 partI 1991. from manufacturer complete as per spcification. do 30 mm thick both side Teak ---- etc., complete with all lead Sqm 4714.64 4714.64 25.2 False None None False None False 118808.928 0 3437604 121886 None 12.9 pg110 V2 Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for miNor T&P's shall Not be made ---- etc., complete with all lead Sqm 7005.38 7005.38 30.6 False None None False None False 214364.628 0 3437605 121886 None 12.85 pg109 V2 Providing & fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.The cost is inclusive of all fixtures and separate charges for miNor T&P's shall Not be made ---- etc., complete with all lead Sqm 5949.48 5949.48 8.64 False None None False None False 51403.5072 0 3437606 121886 None 11.34A pg86 V2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 174.77 174.77 824.04 False None None False None False 144017.4708 0 3437607 121886 None 12.93.1 pg111 V2 Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 5860 Suspension Grade, calcium carbonate and natural fibres wood powder/rice husk/ wheat husk and Non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 KG/m3, screw withdrawal strength of 2200 N Face & 1100 N Edge, minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of EngineerInCharge. Fixtures shall be paid for separatelySize 62 x 100mm ---- etc., complete with all lead m 730.29 730.29 15.3 False None None False None False 11173.437 0 3437608 121886 None 12.94.1 pg112 V2 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 5860 Suspension Grade, calcium carbonate and natural fibers wood powder/rice husk/wheat husk and Non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 KG/m3 and screw withdrawal strength of 1800 N Face & 900 N Edge, minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.Cost of Fixtures to be paid separately30 mm thickness ---- etc., complete with all lead Sqm 3625.45 3625.45 5.67 False None None False None False 20556.3015 0 3437609 121886 None 12.59 pg107 V2 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 KG and door width upto 700 mm, with necessary accessories and screws etc. complete. ---- etc., complete with all lead No 1158.89 1158.89 8.0 False None None False None False 9271.12 0 3437610 121886 None 8.4.2 pg41 V2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Inside ---- etc., complete with all lead Sqm 324.57 324.57 660.59 False None None False None False 214407.6963 0 3437611 121886 None 8.1 pg43 V2 Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 219.5 219.5 727.28 False None None False None False 159637.96 0 3437612 121886 None 8.51 pg50 V2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 104.03 104.03 1387.86 False None None False None False 144379.0758 0 3437613 121886 None 8.5.2 pg42 V2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. Outside ---- etc., complete with all lead Sqm 363.07 363.07 636.76 False None None False None False 231188.4532 0 3437614 121886 None 8.16.2 pg43 V2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of Nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete with all lead m 39.53 39.53 972.0 False None None False None False 38423.16 0 3437615 121886 None 8.79 pg54 V2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineerincharge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 54.1 54.1 440.0 False None None False None False 23804.0 0 3437616 121886 None 9.17.2 pg61 V2 Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand, jointing with grey cement slurry @ 3.3 KG/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1222.35 1222.35 285.56 False None None False None False 349054.266 0 3437617 121886 None 8.2.1 pg41 V2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 306.89 306.89 203.64 False None None False None False 62495.0796 0 3437618 121886 None 9.3 pg63 V2 roviding and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications ---- etc., complete with all lead Sqm 5542.72 5542.72 40.05 False None None False None False 221985.936 0 3437619 121886 None 9.29 pg63 V2 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 4479.53 4479.53 13.92 False None None False None False 62355.0576 0 3437620 121886 None 15.7 pg134 V2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, selfseal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydrostatic pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 KG/bag of cement. For calculation purpose 320 KG of Cement for M20 grade of Concrete is considered in the analysis ---- etc., complete with all lead Sqm 639.79 639.79 27.5 False None None False None False 17594.225 0 3437621 121886 None 7.18 pg23 V2 Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm Nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 2098.29 2098.29 4.22 False None None False None False 8854.7838 0 3437622 121886 None 9.11 pg60 V2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand, jointing with grey cement slurry @ 3.3 KG/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 924.83 924.83 14.06 False None None False None False 13003.1098 0 3437623 121886 None 9.39 pg65 V2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1507.39 1507.39 163.59 False None None False None False 246593.9301 0 3437624 121886 None 8.39 pg48 V2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 132.12 132.12 727.28 False None None False None False 96088.2336 0 3437625 121886 None 8.32 pg46 V2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted with silicon additives, New work Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 162.29 162.29 636.76 False None None False None False 103339.7804 0 3437626 121886 None 8.34.3 pg47 V2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 52.02 52.02 39.24 False None None False None False 2041.2648 0 3437627 121886 None 8.4 pg48 V2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 119.64 119.64 39.24 False None None False None False 4694.6736 0 3437628 121886 None 8.34.1 pg46 V2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work hard and soft wood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 55.14 55.14 60.48 False None None False None False 3334.8672 0 3437629 121886 None 8.47 pg49 V2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 140.44 140.44 60.48 False None None False None False 8493.8112 0 3437630 121886 None 11.28 pg85 V2 Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ---- etc., complete with all lead Kg 587.77 587.77 120.54 False None None False None False 70849.7958 0 3437631 121886 None 10.19 pg72 V2 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. ---- etc., complete with all lead Sqm 3752.36 3752.36 8.16 False None None False None False 30619.2576 0 3437632 121886 None Approved Rate Roof Water Proofing. Surface Preparation: remove all surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish by wire brush and grinding method and surface shall be DRY for application of single component pitch modified polyurethane cures by reaction with atmospheric moisture to given a tough elastomeric waterproof membrane. System : Provide and applying 1.2 mm thick roller applied single component bitumen modified polyurathene coating NITPROOF 600 or equivalent, having elongation capacity of 450 % as per ASTM D412, having Tensile strength 1.5 n/mm2 as per ASTM D 412, Tear resistance of 15 N as per ASTM D 624 and having shore A Hardness 50 as per ASTM D 2240. Waterproofing treatment to be provided after proper surface preparation as per Manufacture Specification. Protection of waterproofing system with minimum 50 mm thick screed and providing construction joints and sealing the same with PU sealant. ---- etc., complete with all lead Sqm 1350.0 1350.0 700.0 False None None False None False 945000.0 0 3437633 121886 None 10.1.7 pg113 V5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of Not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. for: PVC pipes 110mm dia., 6 KG/sqcm & class 3 ---- etc., complete with all lead Rmtr 431.84 431.84 24.0 False None None False None False 10364.16 0 3437634 121886 None 104 KSFIC.DWD Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally & Externally finish, shelves shall be formed out of 19mm ply finished with 1.5mm laminate of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.5mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification. etc., Complete as per Specification and as Directed by the Engineer in charge of Work ---- etc., complete with all lead Sqm 19940.0 19940.0 20.0 False None None False None False 398800.0 0 3437635 121886 None Approved Rate Providing and fixing of Three Seater Stainless Steel Waiting Chair complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Hassan Approved Rate etc., Complete as per Specification and as Directed by the Engineer in charge of Work ---- etc., complete with all lead Each 42480.0 42480.0 32.0 False None None False None False 1359360.0 0 3437636 121886 None Approved Rate Optima Chairs with High Back with mesh and lumber support SEAT/BACK ASSEMBLY: The Cushioned seat assembly consists of seat outer material30% Glass Fiber Filled Nylon& upholstered Seat inner material Poly Propylene with moulded Polyurethane foam & polyester fabric. The Net Back is made up of Back outer materialGlass Fiber Filled Nylon& Back inner material PP upholstered with polyester Mesh fabric. FULL BACK SIZE: 46.5 cm. W x 60.0 cm. H SEAT SIZE : 51.0 cm. W x 49.0 cm. D POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/ 2 KG/m , ARMRESTS : The armrest is having two adjustment, Height and Depth. Height adjustment is provided in Aluminum structure of armrest which is connected to Aluminum Back spine And is operated by button. The depth adjustment is provided in pad which is fixed to armrest structure. Armrest Top is made up of PU molded over plastic inner. LUMBAR SUPPORT ASSEMBLY: The Lumbar suport assembly consists of lumbar spine materialGlass Fiber Filled Nylon which is fixed to Aluminum Back spine. The Lumbar pad material Poly Propylene is fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 50mm. Neckrest ASSEMBLY: The Neckrest assembly consists of upholstered Neckrest inner material Poly Propylene etc., complete as per the direction of Engineer in charge of the work. etc., Complete as per Specification and as Directed by the Engineer in charge of Work ---- etc., complete with all lead No 19470.0 19470.0 2.0 False None None False None False 38940.0 0 3437637 121886 None Approved Rate STAFF CHAIRS : Supplying HIGH BACK Chair Blue mango with contact crome flex back chair with coactive synchro, gas lift, revolving, tilting, and height adjustable fully cushioned medium back chairs and two way adjustable arms. prior confirmation shall be obtain from the officer / Architect for approval etc., Complete as per Specification and as Directed by the Engineer in charge of Work ---- etc., complete with all lead Set 7316.0 7316.0 12.0 False None None False None False 87792.0 0 3437638 121886 None Approved Rate Providing and fixing 450mmw x 450 mmd x 685 mmht Mobile pedestal unitWOODEN with 18mm thick PLPB with edge bonded for body, Two equal drawer and filing drawer with centralized locking system, Telescopic channels, castors, Handles and lock, etc., complete as per specifications, drawings and as directed by Engineer in charge. etc., Complete as per Specification and as Directed by the Engineer in charge of Work ---- etc., complete with all lead Each 4956.0 4956.0 4.0 False None None False None False 19824.0 0 3437639 121886 None Approved Rate Item Description:Two Seater Teakwood Sofa 1350 x 650 x 800 Providing and supplying fully upholstered Two seater sofa with arm rest. Structure to be made of teakwood arm rest of size 100x38x750mm and silverwood frame of 100mmx38mm and 75mm x 38mm size along with 6mm MDF for necessary covering to back and arm rest sides. Provision of 100mm thick foam rubber of ISI grade reputed make for seat fxed on elastic springs / navar and 75mm thick foam rubber for back rest with 25mm foam rubber for arm rest. With 12mm foam rubber slab for edge binding. Fixing 25mm thick PU foam to seat and back for additional padding. Covering of gray cloth thick quality on entire sofa seat, back, arm rest. Fixing good quality tapestry as per approved shade and design of basic price Not less than Rs.454/ per meter including VAT Complete with including , materials, labours, taxes, leads lifts and as per directed by EngineerIn Charge. ---- etc., complete with all lead Each 20060.0 20060.0 2.0 False None None False None False 40120.0 0 3437640 121886 None 20 pg KSFIC.DWD Teak wood European Model Teapoy : Of size 3'x2'. Leg size 3"x3", side support patti 3"x1.25". Upper portion 4"x1.25". Bottom side Teak wood patties. Top with 8mm glass ---- etc., complete with all lead No 12450.0 12450.0 2.0 False None None False None False 24900.0 0 1719924156000 0 None None Buildings 02 WATER SUPPLY AND SANITARY WORKS 1065180.68 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437641 121887 None 14.28.1.2 Pg28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes From wash basin waste lines ---- etc., complete with all lead m 90.64 90.64 45.0 False None None False None False 4078.8 0 3437642 121887 None 16.7.4 Pg191 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. 50mm nominal bore pipes From Sink ---- etc., complete with all lead m 143.17 143.17 50.0 False None None False None False 7158.5 0 3437643 121887 None 10.1.5 Pg113 V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia. 6 kg/sqcm & class 3 - Internal piping ---- etc., complete with all lead m 226.6 226.6 250.0 False None None False None False 56650.0 0 3437644 121887 None 10.1.7 Pg113 V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia. 6 kg/sqcm & class 3 - Internal piping ---- etc., complete with all lead m 423.33 423.33 250.0 False None None False None False 105832.5 0 3437645 121887 None 10.1.9 Pg113 V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia. 6 kg/sqcm & class 3 - RAIN WATER PIPES ---- etc., complete with all lead m 636.54 636.54 50.0 False None None False None False 31827.0 0 3437646 121887 None 14.31 Pg136 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead Each 1256.6 1256.6 12.0 False None None False None False 15079.2 0 3437647 121887 None 13.16 Pg119 V-2 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete with all lead No 638.6 638.6 7.0 False None None False None False 4470.2 0 3437648 121887 None 14.44 Pg138 V-2 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fittingof flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres) including seat cover and cistern fittings nuts bolts and gasket etc complete. ---- etc., complete with all lead Each 11560.72 11560.72 10.0 False None None False None False 115607.2 0 3437649 121887 None 14.4.4 Pg132 V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. ---- etc., complete with all lead Each 13462.1 13462.1 2.0 False None None False None False 26924.2 0 3437650 121887 None 14.10.1.4 Pg133 V-2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 4976.96 4976.96 1.0 False None None False None False 4976.96 0 3437651 121887 None 14.11.2 Pg134 V-2 Providing and fixing white vitreous china laboratory sink with C.I. brackets C.P. brass chain with rubber plug 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions completeincluding painting of fittings and brackets cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead Each 5234.46 5234.46 6.0 False None None False None False 31406.76 0 3437652 121887 None 14.7.1 Pg132 V-2 Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. ---- etc., complete with all lead Each 3174.46 3174.46 8.0 False None None False None False 25395.68 0 3437653 121887 None 14.7.10 Pg133 V-2 Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap ---- etc., complete with all lead Each 3623.54 3623.54 6.0 False None None False None False 21741.24 0 3437654 121887 None 14.22A Pg135 V-2 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. ---- etc., complete with all lead Each 834.3 834.3 14.0 False None None False None False 11680.2 0 3437655 121887 None 14.28.2.1 Pg136 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin & closet including P.V.C. waste fittings complete - Flexible pipe - 32/40mm dia ---- etc., complete with all lead Each 94.76 94.76 14.0 False None None False None False 1326.64 0 3437656 121887 None 14.16A Pg134 V-2 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- etc., complete with all lead Each 280.16 280.16 10.0 False None None False None False 2801.6 0 3437657 121887 None 13.63 Pg128 V-2 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead Each 251.32 251.32 35.0 False None None False None False 8796.2 0 3437658 121887 None 13.32.1 Pg122 V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Internal work - 15 mm nominal dia Pipes ---- etc., complete with all lead m 318.27 318.27 30.0 False None None False None False 9548.1 0 3437659 121887 None 13.32.2 Pg122 V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Internal workshafts & terrace - 20 mm nominal dia Pipes ---- etc., complete with all lead m 390.37 390.37 150.0 False None None False None False 58555.5 0 3437660 121887 None 13.32.3 Pg122 V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Internal workshafts & terrace - 25 mm nominal dia Pipes ---- etc., complete with all lead m 491.31 491.31 175.0 False None None False None False 85979.25 0 3437661 121887 None 13.32.4 Pg122 V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Internal workshafts & terrace - 32 mm nominal dia Pipes ---- etc., complete with all lead m 573.71 573.71 25.0 False None None False None False 14342.75 0 3437662 121887 None 13.33.5 Pg122 V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipeshaving thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer in Charge Shafts & Terrace - 40 mm nominal dia Pipes ---- etc., complete with all lead m 491.31 491.31 175.0 False None None False None False 85979.25 0 3437663 121887 None 13.33.6 Pg122 V3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work) Shafts & Terrace - 50 mm nominal dia Pipes ---- etc., complete with all lead m 742.63 742.63 80.0 False None None False None False 59410.4 0 3437664 121887 None 13.33.7 Pg122 V4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work) Shafts & Terrace - 65 mm nominal dia Pipes ---- etc., complete with all lead m 1442.0 1442.0 10.0 False None None False None False 14420.0 0 3437665 121887 None 13.4.1 Pg117 V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm dia ---- etc., complete with all lead No 565.47 565.47 6.0 False None None False None False 3392.82 0 3437666 121887 None 13.4.2 Pg117 V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm dia ---- etc., complete with all lead No 615.94 615.94 6.0 False None None False None False 3695.64 0 3437667 121887 None 13.4.3 Pg117 V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm dia ---- etc., complete with all lead No 723.06 723.06 6.0 False None None False None False 4338.36 0 3437668 121887 None 13.4.4 Pg117 V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 50 mm dia ---- etc., complete with all lead No 880.65 880.65 2.0 False None None False None False 1761.3 0 3437669 121887 None 13.4.5 Pg117 V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 65 mm dia ---- etc., complete with all lead No 1453.33 1453.33 2.0 False None None False None False 2906.66 0 3437670 121887 None 13.2.1 Pg117 V-2 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore ---- etc., complete with all lead Each 294.58 294.58 2.0 False None None False None False 589.16 0 3437671 121887 None 14.42 Pg138 V-2 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes weighing not less than 60 g. ---- etc., complete with all lead Each 94.76 94.76 2.0 False None None False None False 189.52 0 3437672 121887 None 14.28.1.2 Pg28 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes From wash basin waste lines ---- etc., complete with all lead m 91.55 91.55 15.0 False None None False None False 1373.25 0 3437673 121887 None 16.7.4, Pg191, V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc.50mm nominal bore pipes, From Sink ---- etc., complete with all lead m 144.6 144.6 10.0 False None None False None False 1446.0 0 3437674 121887 None 10.1.5, Pg113, V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 - Internal piping ---- etc., complete with all lead m 228.87 228.87 70.0 False None None False None False 16020.9 0 3437675 121887 None 10.1.7, Pg113, V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 - Internal piping ---- etc., complete with all lead m 427.56 427.56 40.0 False None None False None False 17102.4 0 3437676 121887 None 14.31, Pg136, V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead Each 1269.17 1269.17 5.0 False None None False None False 6345.85 0 3437677 121887 None 13.16, Pg119, V-2 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete with all lead No 644.99 644.99 3.0 False None None False None False 1934.97 0 3437678 121887 None 14.44, Pg138, V-2 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. ---- etc., complete with all lead Each 11676.33 11676.33 4.0 False None None False None False 46705.32 0 3437679 121887 None 14.4.4, Pg132, V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. ---- etc., complete with all lead Each 13596.72 13596.72 2.0 False None None False None False 27193.44 0 3437680 121887 None 14.10.1.4, Pg133, V-2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board-510x1040 mm bowl depth 178 mm ---- etc., complete with all lead No 5026.73 5026.73 1.0 False None None False None False 5026.73 0 3437681 121887 None 14.11.2, Pg134, V-2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete with all lead Each 5286.8 5286.8 2.0 False None None False None False 10573.6 0 3437682 121887 None 14.7.1, Pg132, V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. ---- etc., complete with all lead Each 3206.2 3206.2 2.0 False None None False None False 6412.4 0 3437683 121887 None 14.7.10, Pg133, V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap ---- etc., complete with all lead Each 3659.78 3659.78 2.0 False None None False None False 7319.56 0 3437684 121887 None 14.22A, Pg135, V-2 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. ---- etc., complete with all lead Each 842.64 842.64 4.0 False None None False None False 3370.56 0 3437685 121887 None 14.28.2.1, Pg135, V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin & closet including P.V.C. waste fittings complete - Flexible pipe - 32/40mm dia ---- etc., complete with all lead Each 95.71 95.71 6.0 False None None False None False 574.26 0 3437686 121887 None 14.16A, Pg136, V-2 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- etc., complete with all lead Each 282.96 282.96 4.0 False None None False None False 1131.84 0 3437687 121887 None 13.63, Pg128, V-2 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead Each 253.83 253.83 18.0 False None None False None False 4568.94 0 3437688 121887 None 13.32.1, Pg122, V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal work - 15 mm nominal dia Pipes ---- etc., complete with all lead m 321.45 321.45 20.0 False None None False None False 6429.0 0 3437689 121887 None 13.32.2, Pg122, V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal work,shafts & terrace - 20 mm nominal dia Pipes ---- etc., complete with all lead m 394.27 394.27 70.0 False None None False None False 27598.9 0 3437690 121887 None 13.32.3, Pg122, V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal work,shafts & terrace - 25 mm nominal dia Pipes ---- etc., complete with all lead m 496.22 496.22 10.0 False None None False None False 4962.2 0 3437691 121887 None 13.32.4, Pg122, V2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Internal work,shafts & terrace - 32 mm nominal dia Pipes ---- etc., complete with all lead m 579.45 579.45 10.0 False None None False None False 5794.5 0 3437692 121887 None 13.4.1, Pg117, V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm dia ---- etc., complete with all lead No 571.12 571.12 5.0 False None None False None False 2855.6 0 3437693 121887 None 13.4.2, Pg117, V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm dia ---- etc., complete with all lead No 622.1 622.1 1.0 False None None False None False 622.1 0 3437694 121887 None 13.4.3, Pg117, V2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm dia ---- etc., complete with all lead No 730.29 730.29 1.0 False None None False None False 730.29 0 3437695 121887 None 13.2.1, Pg117, V-2 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore ---- etc., complete with all lead Each 297.53 297.53 2.0 False None None False None False 595.06 0 3437696 121887 None 14.42, Pg138, V-2 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 g. ---- etc., complete with all lead Each 95.71 95.71 2.0 False None None False None False 191.42 0 3437697 121887 None 13.34, Pg123, V-2 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 9.36 9.36 4000.0 False None None False None False 37440.0 0 1719924157000 0 None None Buildings 03 Electrical Works 15744412.68 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3437698 121888 None 2.2.1, Pn-5, V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 277.07 277.07 25.0 False None None False None False 6926.75 0 3437699 121888 None 2.2.2, Pn-5, V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 390.37 390.37 100.0 False None None False None False 39037.0 0 3437700 121888 None 2.2.3, Pn-5, V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead Point 571.65 571.65 250.0 False None None False None False 142912.5 0 3437701 121888 None 2.2.4, Pn-5, V-6 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete with all lead Point 691.31 691.31 15.0 False None None False None False 10369.65 0 3437702 121888 None 2.2.5, Pn-5, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete with all lead Point 1018.67 1018.67 5.0 False None None False None False 5093.35 0 3437703 121888 None 3.4.1, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete with all lead Each 142.14 142.14 40.0 False None None False None False 5685.6 0 3437704 121888 None 3.4.2, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3Way ---- etc., complete with all lead Kg 163.77 163.77 50.0 False None None False None False 8188.5 0 3437705 121888 None 3.4.3, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete with all lead Each 182.31 182.31 15.0 False None None False None False 2734.65 0 3437706 121888 None 3.4.4, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete with all lead Each 226.6 226.6 20.0 False None None False None False 4532.0 0 3437707 121888 None 3.4.5, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 268.83 268.83 40.0 False None None False None False 10753.2 0 3437708 121888 None 3.4.6, Pn-8, V-6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete with all lead Each 328.57 328.57 60.0 False None None False None False 19714.2 0 3437709 121888 None 3.5.1, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- etc., complete with all lead Each 141.11 141.11 40.0 False None None False None False 5644.4 0 3437710 121888 None 3.5.1, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module ---- etc., complete with all lead Each 165.83 165.83 50.0 False None None False None False 8291.5 0 3437711 121888 None 3.5.2, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- etc., complete with all lead Each 180.25 180.25 15.0 False None None False None False 2703.75 0 3437712 121888 None 3.5.3, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete with all lead Each 241.02 241.02 20.0 False None None False None False 4820.4 0 3437713 121888 None 3.5.4, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete with all lead Each 292.52 292.52 40.0 False None None False None False 11700.8 0 3437714 121888 None 3.5.5, Pn-8, V-6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete with all lead Each 354.32 354.32 60.0 False None None False None False 21259.2 0 3437715 121888 None 3.6.1, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 105.06 105.06 605.0 False None None False None False 63561.3 0 3437716 121888 None 3.6.2, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead Each 170.98 170.98 4.0 False None None False None False 683.92 0 3437717 121888 None 3.6.3, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 176.13 176.13 210.0 False None None False None False 36987.3 0 3437718 121888 None 3.6.4, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 367.71 367.71 61.0 False None None False None False 22430.31 0 3437719 121888 None 3.6.9, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead Each 335.78 335.78 25.0 False None None False None False 8394.5 0 3437720 121888 None 3.6.10, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete with all lead Each 243.08 243.08 55.0 False None None False None False 13369.4 0 3437721 121888 None 3.6.7, Pn-9, V-6 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete with all lead Each 185.4 185.4 30.0 False None None False None False 5562.0 0 3437722 121888 None 1.13, Pn-4, V-6 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead No 120.51 120.51 61.0 False None None False None False 7351.11 0 3437723 121888 None 5.42.2, Pn-20, V-6 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.44 0.44 50000.0 False None None False None False 22000.0 0 3437724 121888 None 5.15.9, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE100Amps 25kA ---- etc., complete with all lead Each 8741.61 8741.61 3.0 False None None False None False 26224.83 0 3437725 121888 None 5.15.13, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 250Amps 25kA ---- etc., complete with all lead Each 22032.73 22032.73 2.0 False None None False None False 44065.46 0 3437726 121888 None 1.2.1, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead m 67.98 67.98 2000.0 False None None False None False 135960.0 0 3437727 121888 None 1.2.2, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 80.34 80.34 3000.0 False None None False None False 241020.0 0 3437728 121888 None 1.2.3, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead m 106.09 106.09 600.0 False None None False None False 63654.0 0 3437729 121888 None 1.3.1, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead m 70.04 70.04 1000.0 False None None False None False 70040.0 0 3437730 121888 None 1.3.2, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 81.37 81.37 1500.0 False None None False None False 122055.0 0 3437731 121888 None 1.3.3, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead m 101.97 101.97 200.0 False None None False None False 20394.0 0 3437732 121888 None 2.3.2, Pn-5, V-6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead m 26.78 26.78 1500.0 False None None False None False 40170.0 0 3437733 121888 None 2.3.3, Pn-5, V-6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead m 43.26 43.26 4700.0 False None None False None False 203322.0 0 3437734 121888 None 2.3.4, Pn-5, V-6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead m 64.89 64.89 2500.0 False None None False None False 162225.0 0 3437735 121888 None 2.3.5, Pn-5, V-6 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete with all lead m 94.76 94.76 1800.0 False None None False None False 170568.0 0 3437736 121888 None 5.19.11, Pn-18, V-6 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 4Way TP & N ---- etc., complete with all lead Each 4159.14 4159.14 5.0 False None None False None False 20795.7 0 3437737 121888 None 5.19.12, Pn-18, V-6 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP & N ---- etc., complete with all lead Each 5088.2 5088.2 5.0 False None None False None False 25441.0 0 3437738 121888 None 5.19.9, Pn-18, V-6 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP & N ---- etc., complete with all lead Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3437739 121888 None 5.18.1, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 427.45 427.45 170.0 False None None False None False 72666.5 0 3437740 121888 None 5.18.4, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead Each 761.17 761.17 2.0 False None None False None False 1522.34 0 3437741 121888 None 5.18.8, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead Each 3135.32 3135.32 5.0 False None None False None False 15676.6 0 3437742 121888 None 5.18.9, Pn-18, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3180.64 3180.64 5.0 False None None False None False 15903.2 0 3437743 121888 None 5.20.8, Pn-18, V-6 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc., complete with all lead Each 5301.41 5301.41 10.0 False None None False None False 53014.1 0 3437744 121888 None 5.20.1, Pn-18, V-6 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- etc., complete with all lead Each 4405.31 4405.31 2.0 False None None False None False 8810.62 0 3437745 121888 None 32.07, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 25 sqmm ---- etc., complete with all lead Km 143735.5 143735.5 0.1 False None None False None False 14373.55 0 3437746 121888 None 32.11, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 50 sqmm ---- etc., complete with all lead Km 184342.2 184342.2 0.06 False None None False None False 11060.532 0 3437747 121888 None 32.13, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 70 sqmm ---- etc., complete with all lead Km 327449.4 327449.4 0.07 False None None False None False 22921.458 0 3437748 121888 None 32.14, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 95 sqmm ---- etc., complete with all lead Km 384411.5 384411.5 0.05 False None None False None False 19220.575 0 3437749 121888 None 21.05, Pn-52, V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead Km 21512.58 21512.58 0.1 False None None False None False 2151.258 0 3437750 121888 None 21.06, Pn-52, V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 32073.17 32073.17 0.18 False None None False None False 5773.1706 0 3437751 121888 None 21.07, Pn-52, V-6 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 sqmm to 300 sqmm ---- etc., complete with all lead Km 33245.34 33245.34 0.65 False None None False None False 21609.471 0 3437752 121888 None 63.01, Pn-28, V-6 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia ---- etc., complete with all lead Each 81.37 81.37 8.0 False None None False None False 650.96 0 3437753 121888 None 63.02, Pn-28, V-6 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete with all lead Each 97.85 97.85 16.0 False None None False None False 1565.6 0 3437754 121888 None 63.03, Pn-28, V-6 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 40mm dia ---- etc., complete with all lead Each 152.44 152.44 16.0 False None None False None False 2439.04 0 3437755 121888 None 63.04, Pn-28, V-6 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 45mm dia ---- etc., complete with all lead Each 202.91 202.91 16.0 False None None False None False 3246.56 0 3437756 121888 None 59.01, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm ---- etc., complete with all lead Each 27.81 27.81 16.0 False None None False None False 444.96 0 3437757 121888 None 59.03, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm Long Barrel ---- etc., complete with all lead Each 59.74 59.74 24.0 False None None False None False 1433.76 0 3437758 121888 None 59.04, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm Long Barrel ---- etc., complete with all lead Each 91.67 91.67 16.0 False None None False None False 1466.72 0 3437759 121888 None 59.05, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel ---- etc., complete with all lead Each 132.87 132.87 8.0 False None None False None False 1062.96 0 3437760 121888 None 59.07, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 150 sqmm Long Barrel ---- etc., complete with all lead Each 188.49 188.49 8.0 False None None False None False 1507.92 0 3437761 121888 None 59.11, Pn-26, V-6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 300 sqmm Long Barrel ---- etc., complete with all lead Each 530.45 530.45 24.0 False None None False None False 12730.8 0 3437762 121888 None 12.59.1, Pn-55, V-6 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 150x50mm ---- etc., complete with all lead m 476.89 476.89 150.0 False None None False None False 71533.5 0 3437763 121888 None 12.59.3, Pn-55, V-6 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary Gl bolts/nuts and washer or welding as required 450x50mm ---- etc., complete with all lead m 940.39 940.39 50.0 False None None False None False 47019.5 0 3437764 121888 None 12.56, Pn-54, V-6 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 3615.3 3615.3 14.0 False None None False None False 50614.2 0 3437765 121888 None 12.58.2, Pn-54, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 84.46 84.46 150.0 False None None False None False 12669.0 0 3437766 121888 None 12.58.3, Pn-54, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete with all lead m 131.84 131.84 150.0 False None None False None False 19776.0 0 3437767 121888 None 12.58.4, Pn-54, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm GI strip ---- etc., complete with all lead m 186.43 186.43 30.0 False None None False None False 5592.9 0 3437768 121888 None 12.58.6, Pn-54, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 X 600 X 3 mm GI plate. ---- etc., complete with all lead m 901.25 901.25 4.0 False None None False None False 3605.0 0 3437769 121888 None 12.58.7, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip ---- etc., complete with all lead m 587.1 587.1 80.0 False None None False None False 46968.0 0 3437770 121888 None 12.58.8, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm Copper strip ---- etc., complete with all lead m 1133.0 1133.0 80.0 False None None False None False 90640.0 0 3437771 121888 None 12.58.9, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete with all lead m 1692.29 1692.29 20.0 False None None False None False 33845.8 0 3437772 121888 None 12.58.11, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 600x600x3mm Copper plate ---- etc., complete with all lead Each 7643.63 7643.63 12.0 False None None False None False 91723.56 0 3437773 121888 None 11.5.1, Pn-44, V-6 Supply of round/square recess/surface mounted rolling type LED Down light with ---- etc., complete with all lead Each 588.13 588.13 17.0 False None None False None False 9998.21 0 3437774 121888 None 11.5.2, Pn-44, V-6 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70 lume ---- etc., complete with all lead Each 911.55 911.55 50.0 False None None False None False 45577.5 0 3437775 121888 None 11.5.3, Pn-44, V-6 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & ---- etc., complete with all lead Each 1363.72 1363.72 110.0 False None None False None False 150009.2 0 3437776 121888 None 11.3.2, Pn-43, V-6 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with ---- etc., complete with all lead Each 710.7 710.7 30.0 False None None False None False 21321.0 0 3437777 121888 None 11.11.5, Pn-47, V-6 Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CR ---- etc., complete with all lead Each 277.07 277.07 10.0 False None None False None False 2770.7 0 3437778 121888 None 11.6.3, Pn-45, V-6 Supplying of recess mounting non integral type .LED . W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CC ---- etc., complete with all lead Each 4689.59 4689.59 110.0 False None None False None False 515854.9 0 3437779 121888 None 11.8.3, Pn-46, V-6 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Mainte ---- etc., complete with all lead No 6171.76 6171.76 2.0 False None None False None False 12343.52 0 3437780 121888 None 11.15, Pn-47, V-6 Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- etc., complete with all lead No 867.26 867.26 2.0 False None None False None False 1734.52 0 3437781 121888 None 6.1, Pn-30, V-6 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1536.76 1536.76 14.0 False None None False None False 21514.64 0 3437782 121888 None 6.2.2, Pn-30, V-6 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450mm) ---- etc., complete with all lead Each 4249.78 4249.78 1.0 False None None False None False 4249.78 0 3437783 121888 None 6.4.1, Pn-30, V-6 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ---- etc., complete with all lead Each 2757.31 2757.31 61.0 False None None False None False 168195.91 0 3437784 121888 None 6.5.1, Pn-30, V-6 Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep ---- etc., complete with all lead Each 2566.76 2566.76 5.0 False None None False None False 12833.8 0 3437785 121888 None 12.46, Pn-52, V-6 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead Each 64.89 64.89 10.0 False None None False None False 648.9 0 3437786 121888 None 13.7.1, Pn-56, V-6 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete with all lead Each 125.66 125.66 317.0 False None None False None False 39834.22 0 3437787 121888 None 13.11, Pn-57, V-6 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete with all lead Each 324.45 324.45 66.0 False None None False None False 21413.7 0 3437788 121888 None 13.13, Pn-57, V-6 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 728.21 728.21 15.0 False None None False None False 10923.15 0 3437789 121888 None 13.4.1, Pn-56, V-6 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead Each 1504.83 1504.83 2.0 False None None False None False 3009.66 0 3437790 121888 None 13.5, Pn-56, V-6 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 166.86 166.86 2.0 False None None False None False 333.72 0 3437791 121888 None 5.42.1, Pn-20, V-6 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG ---- etc., complete with all lead Sq CM 0.52 0.52 1090000.0 False None None False None False 566800.0 0 3437792 121888 None 5.40.3, Pn-20, V-6 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 400Amps 4x50x10mm Aluminum Strips ---- etc., complete with all lead m 4578.35 4578.35 15.0 False None None False None False 68675.25 0 3437793 121888 None 5.41.3, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm ---- etc., complete with all lead m 571.65 571.65 30.0 False None None False None False 17149.5 0 3437794 121888 None 5.41.5, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x150x75x6mm C channel ---- etc., complete with all lead m 953.78 953.78 30.0 False None None False None False 28613.4 0 3437795 121888 None 5.15.9, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE100Amps 25kA ---- etc., complete with all lead Each 8741.61 8741.61 7.0 False None None False None False 61191.27 0 3437796 121888 None 5.15.11, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 160Amps 25kA ---- etc., complete with all lead Each 13850.41 13850.41 1.0 False None None False None False 13850.41 0 3437797 121888 None 5.15.13, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 250Amps 25kA ---- etc., complete with all lead Each 22032.73 22032.73 2.0 False None None False None False 44065.46 0 3437798 121888 None 5.15.17, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Therm IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE320-400Amps 50kA ---- etc., complete with all lead Each 31014.33 31014.33 1.0 False None None False None False 31014.33 0 3437799 121888 None 100 Supplying and fixing of 400A, FP, 50kA, microprocessor based Motorised MCCB electrical drawout type.over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) ---- etc., complete with all lead Each 90000.0 90000.0 2.0 False None None False None False 180000.0 0 3437800 121888 None 5.21, Pn-18, V-6 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board ---- etc., complete with all lead Each 9532.65 9532.65 4.0 False None None False None False 38130.6 0 3437801 121888 None 5.33, Pn-19, V-6 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead Each 9594.45 9594.45 4.0 False None None False None False 38377.8 0 3437802 121888 None 5.38, Pn-19, V-6 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 530.45 530.45 12.0 False None None False None False 6365.4 0 3437803 121888 None 5.34, Pn-19, V-6 Supplying, fixing and wiring 50/5 to 400/5Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 578.86 578.86 4.0 False None None False None False 2315.44 0 3437804 121888 None 5.16, Pn-17, V-6 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT ---- etc., complete with all lead Each 1754.09 1754.09 4.0 False None None False None False 7016.36 0 3437805 121888 None 5.36, Pn-19, V-6 Supplying,fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ---- etc., complete with all lead Each 865.2 865.2 12.0 False None None False None False 10382.4 0 3437806 121888 None 5.18.1, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP ---- etc., complete with all lead Each 427.45 427.45 12.0 False None None False None False 5129.4 0 3437807 121888 None 5.42.2, Pn-20, V-6 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.43 0.43 380000.0 False None None False None False 163400.0 0 3437808 121888 None 5.40.2, Pn-20, V-6 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead m 3538.05 3538.05 8.0 False None None False None False 28304.4 0 3437809 121888 None 5.41.2, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x50x6mm ---- etc., complete with all lead m 406.85 406.85 16.0 False None None False None False 6509.6 0 3437810 121888 None 5.41.4, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 778.68 778.68 16.0 False None None False None False 12458.88 0 3437811 121888 None 5.15.11, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 160Amps 25kA ---- etc., complete with all lead Each 13850.41 13850.41 1.0 False None None False None False 13850.41 0 3437812 121888 None 5.18.8, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead Each 3135.32 3135.32 3.0 False None None False None False 9405.96 0 3437813 121888 None 5.18.9, Pn-18, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 63Amps TPN ---- etc., complete with all lead Each 3180.64 3180.64 3.0 False None None False None False 9541.92 0 3437814 121888 None 5.18.1, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 427.45 427.45 3.0 False None None False None False 1282.35 0 3437815 121888 None 5.33, Pn-19, V-6 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead Each 9594.45 9594.45 1.0 False None None False None False 9594.45 0 3437816 121888 None 5.38, Pn-19, V-6 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 530.45 530.45 10.0 False None None False None False 5304.5 0 3437817 121888 None 5.34, Pn-19, V-6 Supplying, fixing and wiring 50/5 to 400/5Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 578.86 578.86 3.0 False None None False None False 1736.58 0 3437818 121888 None 5.39, Pn-19, V-6 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect I disconnect banks, with automatic recognition or with standard programs. ---- etc., complete with all lead Each 22289.2 22289.2 1.0 False None None False None False 22289.2 0 3437819 121888 None 5.37, Pn-19, V-6 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- etc., complete with all lead Kvar 494.4 494.4 70.0 False None None False None False 34608.0 0 3437820 121888 None 5.13.1, Pn-15, V-6 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete with all lead Each 1328.7 1328.7 3.0 False None None False None False 3986.1 0 3437821 121888 None 5.13.2, Pn-15, V-6 Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps ---- etc., complete with all lead Each 2325.74 2325.74 3.0 False None None False None False 6977.22 0 3437822 121888 None 5.42.2, Pn-20, V-6 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.43 0.43 200000.0 False None None False None False 86000.0 0 3437823 121888 None 5.40.2, Pn-20, V-6 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead m 3538.05 3538.05 10.0 False None None False None False 35380.5 0 3437824 121888 None 5.41.1, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead m 314.15 314.15 20.0 False None None False None False 6283.0 0 3437825 121888 None 5.41.4, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 778.68 778.68 20.0 False None None False None False 15573.6 0 3437826 121888 None 5.15.9, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE100Amps 25kA ---- etc., complete with all lead Each 8741.61 8741.61 2.0 False None None False None False 17483.22 0 3437827 121888 None 5.18.1, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 427.45 427.45 6.0 False None None False None False 2564.7 0 3437828 121888 None 5.18.4, Pn-17, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP ---- etc., complete with all lead Each 761.17 761.17 6.0 False None None False None False 4567.02 0 3437829 121888 None 5.18.8, Pn-18, V-6 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead Each 3135.32 3135.32 20.0 False None None False None False 62706.4 0 3437830 121888 None 5.33, Pn-19, V-6 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead Each 9594.45 9594.45 2.0 False None None False None False 19188.9 0 3437831 121888 None 5.38, Pn-19, V-6 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 530.45 530.45 6.0 False None None False None False 3182.7 0 3437832 121888 None 5.34, Pn-19, V-6 Supplying, fixing and wiring 50/5 to 400/5Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 578.86 578.86 6.0 False None None False None False 3473.16 0 3437833 121888 None 14.4.6, Pn-59, V-6 Design, supplying, erecting testing and commissioning of - 20Passenger/ Bed-cum-passenger hospital lift(2 stops/2 Opening) with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. ---- etc., complete with all lead Each 2873245.0 2873245.0 1.0 False None None False None False 2873245.0 0 3437834 121888 None 9.3.5, Pn-40, V-6 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.10 kVA ON LINE UPS ---- etc., complete with all lead Each 106677.1 106677.1 1.0 False None None False None False 106677.1 0 3437835 121888 None 9.5.4, Pn-40, V-6 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 42 AH capacity ---- etc., complete with all lead Each 5244.76 5244.76 16.0 False None None False None False 83916.16 0 3437836 121888 None Least Quotation Rate IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel ---- etc., complete with all lead Each 20200.0 20200.0 11.0 False None None False None False 222200.0 0 3437837 121888 None Least Quotation Rate IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2 ---- etc., complete with all lead Each 21700.0 21700.0 2.0 False None None False None False 43400.0 0 3437838 121888 None Least Quotation Rate Supplying, installation, testing and commissioning of SITC of complete 32 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete with all lead Each 230000.0 230000.0 1.0 False None None False None False 230000.0 0 3437839 121888 None Least Quotation Rate Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 14500.0 14500.0 4.0 False None None False None False 58000.0 0 3437840 121888 None Least Quotation Rate Supply and Installation of I/Os ---- etc., complete with all lead Each 125.0 125.0 20.0 False None None False None False 2500.0 0 3437841 121888 None Least Quotation Rate Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 225.0 225.0 13.0 False None None False None False 2925.0 0 3437842 121888 None Least Quotation Rate Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 285.0 285.0 13.0 False None None False None False 3705.0 0 3437843 121888 None Least Quotation Rate Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 60000.0 60000.0 1.0 False None None False None False 60000.0 0 3437844 121888 None 8.1, Pn-36, V-6 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead Rmtr 39.14 39.14 1200.0 False None None False None False 46968.0 0 3437845 121888 None 1.2.2, Pn-2, V-6 Supplying heavy gauge PVC Consealed conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead Rmtr 80.34 80.34 650.0 False None None False None False 52221.0 0 3437846 121888 None 8.12.2, Pn-37, V-6 Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel ---- etc., complete with all lead Each 4223.0 4223.0 1.0 False None None False None False 4223.0 0 3437847 121888 None 8.4.4, Pn-36, V-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth ---- etc., complete with all lead Each 9100.05 9100.05 1.0 False None None False None False 9100.05 0 3437848 121888 None 3.6.13, Pn-9, V-6 RJ45/ I.O. outlet Cat 6 ---- etc., complete with all lead Each 347.11 347.11 25.0 False None None False None False 8677.75 0 3437849 121888 None 3.6.12, Pn-9, V-6 Telephone socket ---- etc., complete with all lead Each 160.68 160.68 20.0 False None None False None False 3213.6 0 3437850 121888 None 8.1, Pn-36, V-6 Supplying and drawing UTP-CAT 6E LAN cable. ---- etc., complete with all lead m 39.14 39.14 750.0 False None None False None False 29355.0 0 3437851 121888 None 8.10.1, Pn-36, V-6 Supplying & Fixing of I/O Socket with back box Single I/O ---- etc., complete with all lead Each 504.7 504.7 25.0 False None None False None False 12617.5 0 3437852 121888 None 8.4.3, Pn-36, V-6 Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification 9U with 450mm depth ---- etc., complete with all lead Each 8730.28 8730.28 2.0 False None None False None False 17460.56 0 3437853 121888 None 8.9.5, Pn-36, V-6 Supplying fixing of Network Switches. 24 port 10/100 Switch ---- etc., complete with all lead Each 4841.0 4841.0 2.0 False None None False None False 9682.0 0 3437854 121888 None 8.11.2, Pn-37, V-6 Supplying & fixing of .mtrs. Cat 6Patch Cable. 2Mtr ---- etc., complete with all lead Each 264.71 264.71 25.0 False None None False None False 6617.75 0 3437855 121888 None 8.12.2, Pn-37, V-6 Supplying & Fixing of Patch panel for Lan Cabling. 24 Port 10/100 patch panel ---- etc., complete with all lead Each 3141.5 3141.5 2.0 False None None False None False 6283.0 0 3437856 121888 None 8.2.2, Pn-36, V-6 Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable ---- etc., complete with all lead m 21.63 21.63 500.0 False None None False None False 10815.0 0 3437857 121888 None 8.13.2, Pn-37, V-6 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- etc., complete with all lead Each 394.49 394.49 1.0 False None None False None False 394.49 0 3437858 121888 None Least Quotation Rate Supply, Installtion, Testing and Comissioning of IP PBX with 550 SIP Extensions, up to 100 Concurrent Calls Redundant Power Supplies with Hot Swappable Interfaces Boards (FXS/FXO/E1/T1) and IP/SIP Failover with features of Multiple SIP Trunks and Flexible Routing and Support audio codec G.722 and Opus, HD audio on speakerphone and handset - etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work ---- etc., complete with all lead No 85000.0 85000.0 1.0 False None None False None False 85000.0 0 3437859 121888 None Least Quotation Rate TELEPHONES Analog push button telephone with Caller ID, flash and radial ---- etc., complete with all lead No 1800.0 1800.0 20.0 False None None False None False 36000.0 0 3437860 121888 None 1.2.2, Pn-2, V-6 Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) ---- etc., complete with all lead m 80.34 80.34 1200.0 False None None False None False 96408.0 0 3437861 121888 None 38.01, Pn-16, V-6 Supply, installation, erection, testing and commissioning of DAS Compatible HT Panel-:- 1 No.of 11kV 350 MVA 630A drawout type,manually operated VCB 's as incomer &2 nos. 11kV 350MVA 630A drawout type manually operated VCB's as outgoing , CTs/PTs, ammeter, voltmeter, selector switches, Annunciator windows of 8 windows,pushbuttons,indicating lamps, 2O/C +1E/F relay, required no of VAA relays and other standard componenets complete as per the schematic diagram.Panel shall be out door type made out of 14G MS sheet & shall confirm to IP54 classification the unit should be mounted on PCC pedestral , rate shall include cost of PCC pedestral. (Refer schematic for the same) The above should be as per BESCOM requirement ---- etc., complete with all lead No 1453252.0 1453252.0 1.0 False None None False None False 1453252.0 0 3437862 121888 None 13.09, Pn-8, V-6 Supply, erection, testing and commissioning of 250 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, , oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. ---- etc., complete with all lead Each 526653.4 526653.4 1.0 False None None False None False 526653.4 0 3437863 121888 None 12.56, Pn-54, V-6 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 3615.3 3615.3 10.0 False None None False None False 36153.0 0 3437864 121888 None 12.58.3, Pn-54, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete with all lead m 131.84 131.84 60.0 False None None False None False 7910.4 0 3437865 121888 None 12.58.9, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete with all lead m 1692.29 1692.29 60.0 False None None False None False 101537.4 0 3437866 121888 None 12.58.11, Pn-55, V-6 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete with all lead Each 7643.63 7643.63 10.0 False None None False None False 76436.3 0 3437867 121888 None 45.07, Pn-20, V-6 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete with all lead Set 4189.01 4189.01 4.0 False None None False None False 16756.04 0 3437868 121888 None 45.04, Pn-20, V-6 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete with all lead Set 3232.14 3232.14 2.0 False None None False None False 6464.28 0 3437869 121888 None 36.01, Pn-15, V-6 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete with all lead Km 916356.0 916356.0 0.1 False None None False None False 91635.6 0 3437870 121888 None 38, Pn-16, V-6 Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete with all lead Sqm 1016.61 1016.61 150.0 False None None False None False 152491.5 0 3437871 121888 None 32.17, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 185 sqmm ---- etc., complete with all lead Km 571294.7 571294.7 0.3 False None None False None False 171388.41 0 3437872 121888 None 32.19, Pn-13, V-6 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 300 sqmm ---- etc., complete with all lead Km 1097994.0 1097994.0 0.4 False None None False None False 439197.6 0 3437873 121888 None 5.42.1, Pn-20, V-6 Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.52 0.52 176000.0 False None None False None False 91520.0 0 3437874 121888 None 5.40.3, Pn-20, V-6 Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 400 A 4 x 50 x 10 mm Aluminium Strips ---- etc., complete with all lead m 4578.35 4578.35 10.0 False None None False None False 45783.5 0 3437875 121888 None 5.41.3, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm ---- etc., complete with all lead m 571.65 571.65 20.0 False None None False None False 11433.0 0 3437876 121888 None 5.41.5, Pn-20, V-6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x150x75x6mm C channel ---- etc., complete with all lead m 953.78 953.78 20.0 False None None False None False 19075.6 0 3437877 121888 None 5.15.16, Pn-17, V-6 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 400Amps 50kA ---- etc., complete with all lead Each 29062.48 29062.48 1.0 False None None False None False 29062.48 0 3437878 121888 None 5.38, Pn-19, V-6 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 530.45 530.45 3.0 False None None False None False 1591.35 0 3437879 121888 None 15.33, Pn-72, V-6 Supplyandinstallationof2KgC02GasTypeFireExtinugisherSqueezegriptype,usedUnusedMechanism,SqueezeGrip,GrossWeight9.1Kg.emptyWeight7.1Kg.CanHeight595MMDiameter108MM,DischargeTimelessthan8Sees,Controllabledischargemechanism,ApplicableonClass 8&C Fire, 8 Rating 88, Can Construction : Hot spinning/Forging, Valve onstruction:Forging&Machining,InternalCoatingofCan:NotApplicable,ExternalcoatingofCan:SprayPainting,Sheetmetalthickness:4.0MMlSIApproved,1YearWarranty.withinstalertsystemwithSuperiorqualityEPDMRubberHosepipeetc.,includingcostcostofsupportingmaterialslikeMSstand&accessariesifitisfixingnfloor/MSbrackets&accessoriesifitisfixingonwall,labour,usagechargesofmachinerycomplete as per specifications. complete - Providing 4.5Kg C02 Wheel Type ---- etc., complete with all lead Each 5665.0 5665.0 5.0 False None None False None False 28325.0 0 3437880 121888 None 15.4, Pn-62, V-6 Supplyandinstallationinposition,testingandcommissioning6kgFireExtinguisherMonoAmmoniumPhosphatePowder50,StoredPressureType,PressureGauge,GrossWeight9.5Kg,emptyweight3.5Kg,CanHeight435MM,Diameter160MM,DischargeTimelessthan9Sees,Controllabledischargemechanism(Squeezegripwitheasysnapsafetyseal),Rangeminimum4meters,applicableonClassA,8,CandelectricallystartedFire,ARating3A,8Rating218,Canconstruction:Deepdrawn&Co.,Migwelded,valveConstruciton:ForgingandMechining,InternalCoatingofCan:Epoxypowdercoating,ExternalCoatingofCan:EpoxyPoIysterpowercoating,Sheetmetalthickness:1.60MM,5yearsWarrantywithinstalertsystemwithSuperiorqualityEPDMRubberHosepipeetc.,includingcostcostofsupportingmaterialslikeMSstand&accessariesifitisfixingnfloor/MSbrackets&accessoriesifitisfixingonwall,labour,usagechargesofmachinerycomplete as per specificed.with regards to general guidelines of fire saf ---- etc., complete with all lead Each 2935.5 2935.5 5.0 False None None False None False 14677.5 0 3437881 121888 None 15.34, Pn-72, V-6 Supply,installationinposition,testingandcommissioningof4.5KgC0GasTypeFireExtinugisher,TrolleyMounted,2EasyWeightManagementusedUnusedMechanism,SqueezeGrip,GrossWeight19.1Kg.emptyWeight14.6Kg.CanHeight860MMDiameter140MM,DischargeTimelessthan13Sees,Controllabledischargemechanism,ApplicableonClass8&CFire,8Rating138,CanConstuctin:Hotspinning/Forging,ValveConstruction:Forging&Machining,InternalCoatingofCan:NotApplicable,ExternalcoatingofCan:SprayPainting,Sheetmetalthickness:4.5MMlSIApproved1YearWarranty.withinstalertsystemwithSuperiorqualityEPDMRubberHosepipeetc.,includingcostofmaterials,labour,usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 6695.0 6695.0 5.0 False None None False None False 33475.0 0 3437882 121888 None 15.112, Pn-93, V-6 Supplying of two bucket stand alongwith buckets. Complete ---- etc., complete with all lead Each 1133.0 1133.0 4.0 False None None False None False 4532.0 0 3437883 121888 None Least Quotation Rate Supplying, installing, testing and commissioning of 250KVA/200kw Diesel Generator set (CPCB 4 norms) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 ---- etc., complete with all lead Set 2420000.0 2420000.0 1.0 False None None False None False 2420000.0 0 3437884 121888 None 10.2.7, Pn-42, PWD Ele Supply, Erection, testing and commissioning of AMF panel suitable for .250kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with thermal O/L relay,630 A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules ---- etc., complete with all lead Set 289479.4 289479.4 1.0 False None None False None False 289479.4 0 3437885 121888 None Least Quotation Rate Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete with all lead m 8000.0 8000.0 15.0 False None None False None False 120000.0 0 3437886 121888 None Least Quotation Rate Supply and installing of DG set stack using angular structure, channel, necessary nut and bolt and all required accessories for erecting exhaust pipe from 2 nos DG set and space provision for provinding exhaust pipe for 2 more DG set in future. The design of the stack with foundation shall be got approved before fabrication. The foundation for the stack shall be measured separately. ---- etc., complete with all lead Kg 200.0 200.0 300.0 False None None False None False 60000.0 0 3437887 121888 None Least Quotation Rate Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete with all lead m 200.0 200.0 100.0 False None None False None False 20000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1719924156000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1719924156000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1719924156000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1719924156000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1719924156000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1719924156000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1719924156000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1719924156000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1719924156000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1719924156000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1719924156000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1719924156000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1719924156000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose. None 1719924156000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1719924156000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1719924156000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1719924156000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1719924156000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1719924156000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1719924156000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1719924156000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1719924156000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1719924156000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2019-20, 2020-21 2021-22, 2022-23 & 2023-24. None 1719924156000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs. 318.00 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2019-20 to 2023-24). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1) Earthwork Excavation /Embankment 5768.00 Cum 2) RCC and PCC 1290.00 Cum 3) Steel Reinforcement for RCC work 110.00 Tonnes 4)Cement Concrete Block Masonry/Solid Block Masonry 1805.00 Sqm 5) Flooring / Dadooing (Vitrified/Granite/Ceramic/Cement concrete/cladding 1740.00 Sqm, 6)Plastering 5962.00 Sqm, 7)Painting 3035 Sqm Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (c). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.79.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.5.50 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause ITT 3.3(a)Each Tenderer should further demonstrate(a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required, specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease, hire basis for all works provided, the relevant documents (commitment agreements etc., for availability for this work are furnished. Sl.No Description of Equipment Total Quantity, Own, Hire 1) Min 10 cft capacity Concrete Mixer 2 Nos. 1 No, 1 No. 2) Steel Centering and shuttering sheets 600 Sqmtr 300 Sqmtrs, 300 Sqmtrs., 3) Excavator 1 No. 1 No 4) Tipper 4 Nos, 2 Nos. 2 Nos. 5) Water tanker 2 Nos, 1 No., 1 No. 6) Bar Bending and cutting machine 2 Nos 1 No. 1 No. 7) Generator 500 KVA 2 Nos, 1 No 1 No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- ax Invoice/Agreements from the supplier None None None None KPWD Class-I Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2019-20 to 2023-24 updated to 2024-25 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2024-25 price level of existing commitments and ongoing works to be completed during the next 11 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1)Project Manager BE Civil with minimum experience of 15 years in the Construction of buildings 1 One. 2)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 One 3)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 One, 4) Site Engineer (QA QC) B.E. Civil with minimum experience of 5 years in the Construction of buildings with QA QC OR Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings with QA QC 1 One, 5) Site Engineer (Safety Manager) Any Degree with minimum experience of 5 years in the Construction of similar buildings with Safety management 1 One, 6) Computer Operator Diploma in Computer Application & Office Procedures with 5 Years Experience 1 One. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates None None None None Clause ITT 3.2(a):The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.1386.00 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.191.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued by a Scheduled/ Nationalized Bank
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate issued by Chartered Accountant True Technical Bid Company Registration Certificate issued by KPWD True Technical Bid ESI & PF Registration certificates True Technical Bid Work done certificates True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1719924459000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, HFWD, Arogya Soudha, 3rd Floor, 1st Cross Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None