| 1720162981000 | 0 | None | None | Other Works | Installing Motor in Ward No 4 near Babu Jadhava house,Pandu karapudi house,in ward no1 near Goudra house and Construction of Cistern in Jakati Oni, Hindu smashana, Veerashaiva smashana,in ward no 4 at TP Tikota. | 866594.26 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3457399 | 123118 | None | code01 | Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments.5.00 HP/3.7KW 25 STG . | Nos | 27192.0 | 27192.0 | 4.0 | False | None | None | False | None | False | 108768.0 | 0 | | 3457400 | 123118 | None | code02 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter Upto 6 HP pumps 3 to 6 HP pumps | Each | 9836.5 | 9836.5 | 4.0 | False | None | None | False | None | False | 39346.0 | 0 | | 3457401 | 123118 | None | code03 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 63 mm dia. | m | 194.67 | 194.67 | 420.0 | False | None | None | False | None | False | 81761.4 | 0 | | 3457402 | 123118 | None | code04 | Submersible Cable: Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 Sqm. | m | 139.05 | 139.05 | 420.0 | False | None | None | False | None | False | 58401.0 | 0 | | 3457403 | 123118 | None | code05 | Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 100 mm | Nos | 673.62 | 673.62 | 3.0 | False | None | None | False | None | False | 2020.86 | 0 | | 3457404 | 123118 | None | code06 | Supply and delivery best indegeneous brand new power capacitor as per IS 283/86 with latest amendments with ISI mark of required capacity tested and approved by one KEB aouthorities and erection. Electrification and commissioning of the same at the location of the respective pumpsets as provided in SPD rate contract . | Kvar | 566.5 | 566.5 | 3.0 | False | None | None | False | None | False | 1699.5 | 0 | | 3457405 | 123118 | None | code07 | Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6 to 40 Amps with scalable box. | Each | 1184.5 | 1184.5 | 3.0 | False | None | None | False | None | False | 3553.5 | 0 | | 3457406 | 123118 | None | code08 | Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work.. | Job | 1390.5 | 1390.5 | 3.0 | False | None | None | False | None | False | 4171.5 | 0 | | 3457407 | 123118 | None | code09 | Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.. | m | 139.05 | 139.05 | 135.0 | False | None | None | False | None | False | 18771.75 | 0 | | 3457408 | 123118 | None | code10 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. | Job | 3862.5 | 3862.5 | 3.0 | False | None | None | False | None | False | 11587.5 | 0 | | 3457409 | 123118 | None | code11 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65 mm dia non return valve | Each | 1596.5 | 1596.5 | 3.0 | False | None | None | False | None | False | 4789.5 | 0 | | 3457410 | 123118 | None | code12 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. | Job | 6695.0 | 6695.0 | 3.0 | False | None | None | False | None | False | 20085.0 | 0 | | 3457411 | 123118 | None | code13 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately | Cum | 579.89 | 579.89 | 6.3 | False | None | None | False | None | False | 3653.307 | 0 | | 3457412 | 123118 | None | code14 | Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost oflabour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m | Cum | 249.26 | 249.26 | 182.153 | False | None | None | False | None | False | 45403.45678 | 0 | | 3457413 | 123118 | None | code15 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5779.33 | 5779.33 | 15.465 | False | None | None | False | None | False | 89377.33845 | 0 | | 3457414 | 123118 | None | code16 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technica specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6828.9 | 6828.9 | 2.052 | False | None | None | False | None | False | 14012.9028 | 0 | | 3457415 | 123118 | None | code17 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 382.13 | 382.13 | 27.0 | False | None | None | False | None | False | 10317.51 | 0 | | 3457416 | 123118 | None | code18 | RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm | Each | 16893.03 | 16893.03 | 5.0 | False | None | None | False | None | False | 84465.15 | 0 | | 3457417 | 123118 | None | code19 | Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. | Each | 1938.46 | 1938.46 | 5.0 | False | None | None | False | None | False | 9692.3 | 0 | | 3457418 | 123118 | None | code20 | Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: Heavy Duty GI pipe of 32mm dia | m | 344.02 | 344.02 | 150.0 | False | None | None | False | None | False | 51603.0 | 0 | | 3457419 | 123118 | None | code21 | Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required etc. for 20.88.4: 32 mm nominal bore | Each | 450.11 | 450.11 | 15.0 | False | None | None | False | None | False | 6751.65 | 0 | | 3457420 | 123118 | None | code22 | Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. | Each | 181.28 | 181.28 | 15.0 | False | None | None | False | None | False | 2719.2 | 0 | | 3457421 | 123118 | None | code23 | Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: | Each | 164.8 | 164.8 | 15.0 | False | None | None | False | None | False | 2472.0 | 0 | | 3457422 | 123118 | None | code24 | Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any. | Each | 181.28 | 181.28 | 5.0 | False | None | None | False | None | False | 906.4 | 0 | | 3457423 | 123118 | None | code25 | Supply and delivery at site GM (copper alloy) gate valves confirming to, Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark For 32 mm dia GM (Copper alloy) Gate valves For 32 mm dia GM (Copper alloy) Gate valves | Each | 1378.14 | 1378.14 | 5.0 | False | None | None | False | None | False | 6890.7 | 0 | | 3457424 | 123118 | None | code26 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | Each | 746.75 | 746.75 | 25.0 | False | None | None | False | None | False | 18668.75 | 0 | | 3457425 | 123118 | None | code27 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing, and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with, all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 90mm dia., 6 kg/sqcm & class 3 | m | 302.82 | 302.82 | 323.0 | False | None | None | False | None | False | 97810.86 | 0 | | 3457426 | 123118 | None | code28 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications | Cum | 164.8 | 164.8 | 174.42 | False | None | None | False | None | False | 28744.416 | 0 | | 3457427 | 123118 | None | code29 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and latevibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. | Cum | 6565.22 | 6565.22 | 2.36 | False | None | None | False | None | False | 15493.9192 | 0 | | 3457428 | 123118 | None | code30 | Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments.3.00 HP/2.2KW 20 STG | Each | 22655.88 | 22655.88 | 1.0 | False | None | None | False | None | False | 22655.88 | 0 |
|