| 3459480 | 123251 | None | 001 | Earth work excavation by manual approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. PWD SR 2023-24 Item No.1.5.1 Vol-I P no 06 | Cum | 313.95 | 313.95 | 55.98 | False | None | None | False | None | False | 17574.921 | 0 |
| 3459481 | 123251 | None | 002 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates PWD SR 2023-24 Item No.2.1.2 Vol-T P no 15 | Cum | 5947.2 | 5947.2 | 12.06 | False | None | None | False | None | False | 71723.232 | 0 |
| 3459482 | 123251 | None | 003 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement: 6 coarse sand) PWD SR 2023-24 Item No.5.1.1 VolII P no 09 | Cum | 5891.55 | 5891.55 | 31.71 | False | None | None | False | None | False | 186821.0505 | 0 |
| 3459483 | 123251 | None | 004 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 coarse sand) PWD SR 2023-24 Item No.5.4 Vol-II P no 09 | Cum | 6708.45 | 6708.45 | 22.96 | False | None | None | False | None | False | 154026.012 | 0 |
| 3459484 | 123251 | None | 005 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 PWD SR 2023-24 S No.3.6 Ref. to MoRT&H: IRC -305 Vol-III P no 17 | Cum | 517.65 | 517.65 | 72.254 | False | None | None | False | None | False | 37402.2831 | 0 |
| 3459485 | 123251 | None | 006 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.
Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2023-24 Item No.2.1.4 Vol-I P no 15 | Cum | 6527.85 | 6527.85 | 28.058 | False | None | None | False | None | False | 183158.4153 | 0 |
| 3459486 | 123251 | None | 007 | Providing and fixing Steel
including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge. PWD SR 2023-24 Item No.11.25.2 Vol-II P no 84 | Kg | 142.8 | 142.8 | 4803.432 | False | None | None | False | None | False | 685930.0896 | 0 |
| 3459487 | 123251 | None | 010 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. PWD SR 2023-24 Item No.7.38 Vol-II P no 26 | Sqm | 596.4 | 596.4 | 572.1 | False | None | None | False | None | False | 341200.44 | 0 |
| 3459488 | 123251 | None | 008 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm PWD SR 2023-24 Item No.9.12.2 Vol-II P no 60 | Sqm | 1202.25 | 1202.25 | 155.66 | False | None | None | False | None | False | 187142.235 | 0 |
| 3459489 | 123251 | None | 009 | Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion), including cost of materials, labour, curing, complete as per specifications. PWD SR 2023-24 Item No.9.37 Vol-II P no 64 | Sqm | 825.3 | 825.3 | 43.848 | False | None | None | False | None | False | 36187.7544 | 0 |
| 3459490 | 123251 | None | 011 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size - 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
PWD SR 2023-24 Item No.12.84 Vol-II P no 108 | Sqm | 5274.15 | 5274.15 | 17.28 | False | None | None | False | None | False | 91137.312 | 0 |
| 3459491 | 123251 | None | 012 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete.Light Duty GI pipe of 32mm dia
PWD SR 2023-24 S No.11.1.4 Vol-5 P no 127 | m | 350.7 | 350.7 | 180.0 | False | None | None | False | None | False | 63126.0 | 0 |
| 3459492 | 123251 | None | 013 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour,
removing sand as per directions of Engineer-in-charge PWD SR 23-24 Item No 8.2.2 Vol-II P No 41 | Sqm | 292.95 | 292.95 | 74.09 | False | None | None | False | None | False | 21704.6655 | 0 |
| 3459493 | 123251 | None | 014 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand
PVC insulated copper wire (confirming to IS-694: and latest amendments) with al 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch PWD Electrical Common SR Vol-6 Item no. 2.1.1 | Point | 285.0 | 285.0 | 12.0 | False | None | None | False | None | False | 3420.0 | 0 |
| 3459494 | 123251 | None | 015 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Item no.2.1.2 Pg no5. Electrical Common SR Vol-6 | Point | 394.0 | 394.0 | 12.0 | False | None | None | False | None | False | 4728.0 | 0 |
| 3459495 | 123251 | None | 016 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.55qmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Item no.2.1.3 Pg no5. Electrical Common SR Vol-6 | Point | 570.0 | 570.0 | 12.0 | False | None | None | False | None | False | 6840.0 | 0 |
| 3459496 | 123251 | None | 017 | Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293., complete.6A Three Way socket Item no.3.6.3 Pg no8.
Electrical Common SR Vol-6 | Each | 171.0 | 171.0 | 12.0 | False | None | None | False | None | False | 2052.0 | 0 |
| 3459497 | 123251 | None | 018 | Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854 Item no.3.1 Pg no8. Electrical Common SR Vol-6 | Each | 128.0 | 128.0 | 72.0 | False | None | None | False | None | False | 9216.0 | 0 |
| 3459498 | 123251 | None | 019 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12 Way Item no.3.3.6 Pg no8. Electrical
Common SR Vol-6 | Each | 261.0 | 261.0 | 6.0 | False | None | None | False | None | False | 1566.0 | 0 |
| 3459499 | 123251 | None | 020 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box 10-12 Module Item no.3.5.6 Pg no8. Electrical Common SR Vol. | Each | 344.0 | 344.0 | 6.0 | False | None | None | False | None | False | 2064.0 | 0 |
| 3459500 | 123251 | None | 021 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way Item no.3.3.5 Pg no8. Electrical Common SR Vol-6 | Each | 219.0 | 219.0 | 6.0 | False | None | None | False | None | False | 1314.0 | 0 |
| 3459501 | 123251 | None | 022 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box 8 Module Item no.3.5.5 Pg no8. Electrical Common SR Vol-6 | Each | 284.0 | 284.0 | 6.0 | False | None | None | False | None | False | 1704.0 | 0 |
| 3459502 | 123251 | None | 023 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 Way Item no.3.3.4 Pg no8. Electrical Common SR Vol-6 | Each | 173.0 | 173.0 | 6.0 | False | None | None | False | None | False | 1038.0 | 0 |
| 3459503 | 123251 | None | 024 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box 6 Module Item no.3.5.4 Pg no8. Electrical Common SR Vol-6 | Each | 234.0 | 234.0 | 6.0 | False | None | None | False | None | False | 1404.0 | 0 |
| 3459504 | 123251 | None | 025 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. Electronic stepped regulator. Item no.3.14.16 Pg no 8. Electrical Common SR Vol-6 | No | 281.0 | 281.0 | 12.0 | False | None | None | False | None | False | 3372.0 | 0 |
| 3459505 | 123251 | None | 026 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 | Each | 415.0 | 415.0 | 12.0 | False | None | None | False | None | False | 4980.0 | 0 |
| 3459506 | 123251 | None | 027 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. Item no.5.30 Pg no 19 Electrical Common SR cOL-6 | Each | 1380.0 | 1380.0 | 6.0 | False | None | None | False | None | False | 8280.0 | 0 |
| 3459507 | 123251 | None | 028 | Supply of round/square recess/surface mounted rolling type LED Down light with LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition (LED square or round down light 10-12W )Item no. 11.5.2 Pg no 44. Electrical Common SR Vol-6 | Each | 885.0 | 885.0 | 48.0 | False | None | None | False | None | False | 42480.0 | 0 |
| 3459508 | 123251 | None | 029 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50
Hz, Rated power upto 35 W +/- 10%, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10percent RPM, Rated air delivery 210 +/- 10Percent Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms(2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty.(BLDC fans) 48" Sweep 5 Star (1200 mm) Item no.6.4.1 Pg no 30.
Electrical Common SR Vol-6 | Each | 2677.0 | 2677.0 | 6.0 | False | None | None | False | None | False | 16062.0 | 0 |
| 3459509 | 123251 | None | 030 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S" hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Item no.13.11 Pg no 57. Electrical Common SR Vol-6 | Each | 315.0 | 315.0 | 6.0 | False | None | None | False | None | False | 1890.0 | 0 |
| 3459510 | 123251 | None | 031 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) ESCOM Electrical SR Vol-6 Item no.32.04 Pg no 13 KM | Km | 88418.0 | 88418.0 | 0.18 | False | None | None | False | None | False | 15915.24 | 0 |
| 3459511 | 123251 | None | 032 | Single Phase Deep Drawn Meter Protection box S No.431 Item no.55.07 Pg no 25 (ESCOM SR) Electrical common SR Vol -6 | Unit | 770.0 | 770.0 | 6.0 | False | None | None | False | None | False | 4620.0 | 0 |
| 3459512 | 123251 | None | 033 | GESCOM Charges | No | 60000.0 | 60000.0 | 1.0 | False | None | None | False | None | False | 60000.0 | 0 |