createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1720258489276 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 660.00 emd 52513.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 22-07-2024 16:30:00 tenderQueryClose 22-07-2024 11:00:00 technicalBidOpen None publishedDate 06-07-2024 16:07:03 publishedByPost TMC_CO_GMK publishedByUser KPE14757 - BHARATHI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson ENVIRONMENT ENGINEER splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8147571760 tenderSupplierList None
tenderSchedule	createdTs 1720258489309 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT21074 title Construction of proposed 4TPD MRF center ( Material Recovery facility) of PEB structure ( Primary shed) at Gurmitkal description Construction of proposed 4TPD MRF center ( Material Recovery facility) of PEB structure ( Primary shed) at Gurmitkal category WORKS categoryText Works ecv 2625661.69 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2433 locationName DMA Town Municipal Council Gurmitkala provisionalAmount 3150000.0 groupOverheadTotal None fileNumber GKL/SBM/2024-25/01
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1720258489000 0 None None Other Works Construction of proposed 4TPD MRF center ( Material Recovery facility) of PEB structure ( Primary shed) at Gurmitkal 2625661.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3468371 123705 None code01 Earth work in surface excavation by manual means for lowering & levellingthe ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per drawing and technical specifications, including setting out, barricading, caution lights, dressing of excavated surfaces, disposing off the excavated spalls/stuff & stacking the selected spall/ stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(Item No. 1.3 Page No. 5 Vol.1 PWD SR) Cum 107.1 107.1 29.41 False None None False None False 3149.811 0 3468372 123705 None code02 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (Item No. 2.1.2 Page No. 15 Vol.1 PWD SR) Cum 5947.2 5947.2 29.17 False None None False None False 173479.824 0 3468373 123705 None code03 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.3.2 Page No. 16 Vol.1 PWD SR & Appendix I page No.115) Cum 7322.4 7322.4 7.12 False None None False None False 52135.488 0 3468374 123705 None code04 Column base Cum 11016.0 11016.0 1.63 False None None False None False 17956.08 0 3468375 123705 None code05 Hall Grade slab Cum 7322.4 7322.4 28.62 False None None False None False 209567.088 0 3468376 123705 None code06 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Item No. 2.2.3 Page No. 15 Vol.1 PWD SR & Appendix I page No.115) Cum 9820.8 9820.8 4.82 False None None False None False 47336.256 0 3468377 123705 None code07 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Item No. 2.11 Page No. 18 Vol.1 PWD SR) Kg 93.93 93.93 2773.1 False None None False None False 260477.283 0 3468378 123705 None code08 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) Cum 6708.45 6708.45 25.01 False None None False None False 167778.3345 0 3468379 123705 None code09 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work. (Item No. 1.8 Page No. 7 Vol.1 PWD SR) Cum 497.7 497.7 128.79 False None None False None False 64098.783 0 3468380 123705 None code10 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Item No. 6.33 Page No. 17 Vol.2 PWD SR) Sqm 1292.55 1292.55 91.08 False None None False None False 117725.454 0 3468381 123705 None code11 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..(Item No. 8.2.1, Page No. 41, Vol.2) Sqm 309.75 309.75 187.56 False None None False None False 58096.71 0 3468382 123705 None code12 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (Item No. 11.2, Page No. 77, Vol.2) Kg 118.65 118.65 6130.0 False None None False None False 727324.5 0 3468383 123705 None code13 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Item No. 7.38, Page No. 26, Vol.2)flashings Sqm 585.04 585.04 518.21 False None None False None False 303173.5784 0 3468384 123705 None code14 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge..(Item No. 8.51, Page No. 50, Vol.2) Sqm 105.0 105.0 187.56 False None None False None False 19693.8 0 3468385 123705 None code15 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge..(Item No. 8.54.1, Page No. 50, Vol.2) Sqm 76.65 76.65 91.08 False None None False None False 6981.282 0 3468386 123705 None code16 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge.(Item No. 8.54.1, Page No. 50, Vol.2) Sqm 76.65 76.65 91.08 False None None False None False 6981.282 0 3468387 123705 None code17 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No. 11.6.1, Page No. 76, Vol.2) Sqm 2764.65 2764.65 9.0 False None None False None False 24881.85 0 3468388 123705 None code18 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Item No. 11.8.4, Page No. 77, Vol.2) Each 25920.3 25920.3 1.0 False None None False None False 25920.3 0 3468389 123705 None code19 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications...(Item No. 11.35.1.1, Page No. 87, Vol.2) Kg 474.6 474.6 240.0 False None None False None False 113904.0 0 3468390 123705 None code20 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54.Incomer : MCCB TPN 63A with CBCT ELR & Ph indicators, meter section with all parameters as required 100A 4 Wire 25kA 415V Aluminium busbars compartment.Outgoings: 63A MCCB feeder- 01No.Outgoings: 16A MPCB feeder - 01Nos Outgoings: 16A MPCB feeder - 02NosOutgoings: 63/40A MCB feeder- 08Nos No 65000.0 65000.0 1.0 False None None False None False 65000.0 0 3468391 123705 None code21 Sub panel-1 Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required 63A 4 Wire 16kA 415V Aluminium busbars compartment.Outgoings: 40/63A 4P MCB feeder- 10No.Outgoings: 32A Industrial socket-02Nos.Outgoings: 16A Industrial socket-02Nos. No 35000.0 35000.0 1.0 False None None False None False 35000.0 0 3468392 123705 None code22 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness 5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included.3.5Cx50 Sqmm Al Ar cable m 300.0 300.0 15.0 False None None False None False 4500.0 0 3468393 123705 None code23 4Cx25 Sqmm Al Ar cable m 180.0 180.0 20.0 False None None False None False 3600.0 0 3468394 123705 None code24 4Cx16 Sqmm Al Ar cable m 120.0 120.0 20.0 False None None False None False 2400.0 0 3468395 123705 None code25 4Cx10 Sqmm Cu Ar cable m 332.0 332.0 1.0 False None None False None False 332.0 0 3468396 123705 None code26 4Cx6.0 Sqmm Cu Ar cable m 256.0 256.0 1.0 False None None False None False 256.0 0 3468397 123705 None code27 3Cx6.0 Sqmm Cu Un Ar cable m 316.0 316.0 1.0 False None None False None False 316.0 0 3468398 123705 None code28 3Cx4.0 Sqmm Cu Un Ar cable m 300.0 300.0 1.0 False None None False None False 300.0 0 3468399 123705 None code29 Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3.5Cx50 Sqmm Al Ar cable Set 200.0 200.0 1.0 False None None False None False 200.0 0 3468400 123705 None code30 4Cx25 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3468401 123705 None code31 4Cx16 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3468402 123705 None code32 4Cx10 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3468403 123705 None code33 4Cx6.0 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3468404 123705 None code34 3Cx6.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3468405 123705 None code35 3Cx4.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3468406 123705 None code36 Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned copper lug) Set 250.0 250.0 1.0 False None None False None False 250.0 0 3468407 123705 None code37 25 Sqmm Al Ar cable (tinned copper lug) Set 16.0 16.0 2.0 False None None False None False 32.0 0 3468408 123705 None code38 16 Sqmm Al Ar cable (tinned copper lug) Set 9.95 9.95 2.0 False None None False None False 19.9 0 3468409 123705 None code39 10 Sqmm Cu Ar cable (tinned copper lug) Set 6.4 6.4 1.0 False None None False None False 6.4 0 3468410 123705 None code40 6.0 Sqmm Cu Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3468411 123705 None code41 6.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3468412 123705 None code42 4.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3468413 123705 None code43 PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws.19/20mm dia PVC 2mm thick conduit m 68.0 68.0 10.0 False None None False None False 680.0 0 3468414 123705 None code44 25mm dia PVC 2mm thick conduit m 80.0 80.0 10.0 False None None False None False 800.0 0 3468415 123705 None code45 Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit.1 Light point upto 3Mtr from switch board No 276.0 276.0 1.0 False None None False None False 276.0 0 3468416 123705 None code46 1 Light point above 3M upto 6Mtr from switch board No 386.0 386.0 1.0 False None None False None False 386.0 0 3468417 123705 None code47 1 Light point above 6M upto 10Mtr from switch board No 567.0 567.0 1.0 False None None False None False 567.0 0 3468418 123705 None code48 2 Light point above 3Mtr upto 6Mtr from switch board No 721.0 721.0 1.0 False None None False None False 721.0 0 3468419 123705 None code49 2 Light point above 6Mtr upto 10Mtr from switch board No 721.0 721.0 1.0 False None None False None False 721.0 0 3468420 123705 None code50 3 Light point above 6Mtr upto 10Mtr from switch board No 1054.0 1054.0 3.0 False None None False None False 3162.0 0 3468421 123705 None code51 Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.0 Sqmm Cu FRLS wire m 18.0 18.0 150.0 False None None False None False 2700.0 0 3468422 123705 None code52 1.5 Sqmm Cu FRLS wire m 26.0 26.0 150.0 False None None False None False 3900.0 0 3468423 123705 None code53 2.5 Sqmm Cu FRLS wire m 40.0 40.0 150.0 False None None False None False 6000.0 0 3468424 123705 None code54 4.0 Sqmm Cu FRLS wire m 59.0 59.0 50.0 False None None False None False 2950.0 0 3468425 123705 None code55 6.0 Sqmm Cu FRLS wire m 115.0 115.0 50.0 False None None False None False 5750.0 0 3468426 123705 None code56 Switches & sockets outlets in Existing modular box 6A one way switch No 88.0 88.0 4.0 False None None False None False 352.0 0 3468427 123705 None code57 6A 5Pin socket No 162.0 162.0 2.0 False None None False None False 324.0 0 3468428 123705 None code58 Stepped fan regulator No 313.0 313.0 2.0 False None None False None False 626.0 0 3468429 123705 None code59 6/16A Universal socket No 249.0 249.0 2.0 False None None False None False 498.0 0 3468430 123705 None code60 Light fixture Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc..Considered outdoor type light fitting for equivalent. No 7390.0 7390.0 8.0 False None None False None False 59120.0 0 3468431 123705 None code61 Earthing 25x6mm GI Earth Strip m 92.0 92.0 60.0 False None None False None False 5520.0 0 3468432 123705 None code62 Earthing 8.0 SWG GI bare wire m 15.2 15.2 50.0 False None None False None False 760.0 0 3468433 123705 None code63 Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall.Supply & installation of GI Ladder type cable tray 300x50mm m 400.0 400.0 20.0 False None None False None False 8000.0 0 3468434 123705 None code64 Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details No 8000.0 8000.0 1.0 False None None False None False 8000.0 0 3468435 123705 None code65 Misscellaneous & Rounding off charges No 253.9 253.9 1.0 False None None False None False 253.9 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1720258492000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1720258492000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1720258492000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1720258492000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1720258492000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1720258492000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1720258492000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1720258492000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1720258492000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1720258492000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1720258492000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1720258492000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1720258492000 0 None None ELIGIBILITY Banker Details for reference None 1720258492000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1720258492000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1720258492000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1720258492000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None 1720261441000 0 None None ELIGIBILITY Tender rates are excluding GST and hence bidders are adviced to quote the rates excluding GST only. Later in the agreement GST will be added as per Govt rules None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Civil Class III & above license True Technical Bid Annual turnover certificate along with valid UDIN and ITR True Technical Bid Work done certificate as per tender document True Technical Bid Bankers certificate/ LOC as per tender document True Technical Bid GST Registration certificate True Technical Bid All other documents as per tender document True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None