1720264222000 | 0 | None | None | Buildings | CONSTRUCTION OF SMASHAN SHED AND FIXING OF GATE FOR PUBLIC CEMETERY NEAR PKPS VPC NO 376 AT UGAR KHURD VILLAGE IN KAGWAD TALUKA OF BELAGAVI DIST. | 221457.65 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
3470601 | 123790 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such simillar works as per drawing and technical specification, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth etc complete as per direction of the Engineer incharge of the work. | Cum | 299.0 | 299.0 | 9.07 | False | None | None | False | None | False | 2711.93 | 0 | 3470602 | 123790 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggrregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost od steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates etc complete as per direction of the Engineer incharge of the work. | Cum | 5989.0 | 5989.0 | 4.89 | False | None | None | False | None | False | 29286.21 | 0 | 3470603 | 123790 | None | code03 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete as per direction of the Engineer incharge of the work. | Cum | 6828.84 | 6828.84 | 1.39 | False | None | None | False | None | False | 9492.0876 | 0 | 3470604 | 123790 | None | code04 | Providing and laying in position Reinforced cement concrete for all super structures of building, Irrigation works, Super structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete as per direction of the Engineer incharge of the work. | Cum | 11271.0 | 11271.0 | 0.48 | False | None | None | False | None | False | 5410.08 | 0 | 3470605 | 123790 | None | code05 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with etc complete as per direction of the Engineer incharge of the work. | Cum | 5611.0 | 5611.0 | 7.02 | False | None | None | False | None | False | 39389.22 | 0 | 3470606 | 123790 | None | code06 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. etc complete as per direction of the Engineer incharge of the work. | Cum | 266.0 | 266.0 | 9.45 | False | None | None | False | None | False | 2513.7 | 0 | 3470607 | 123790 | None | code07 | Providing and laying in position Reinforced cement concrete for all super structures of building, Irrigation works, Super structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete as per direction of the Engineer incharge of the work. | Cum | 9945.0 | 9945.0 | 0.44 | False | None | None | False | None | False | 4375.8 | 0 | 3470608 | 123790 | None | code08 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. etc complete as per direction of the Engineer incharge of the work. | Kg | 89.0 | 89.0 | 121.9 | False | None | None | False | None | False | 10849.1 | 0 | 3470609 | 123790 | None | code09 | roviding and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge..etc complete as per direction of the Engineer incharge of the work. | Kg | 106.0 | 106.0 | 605.77 | False | None | None | False | None | False | 64211.62 | 0 | 3470610 | 123790 | None | code10 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.etc complete as per direction of the Engineer incharge of the work. | Sqm | 879.0 | 879.0 | 36.9 | False | None | None | False | None | False | 32435.1 | 0 | 3470611 | 123790 | None | code11 | Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specification etc complete as per direction of the Engineer incharge of the work. | Sqm | 3012.0 | 3012.0 | 6.9 | False | None | None | False | None | False | 20782.8 | 0 |
|